asterisk

Commit Graph

Author	SHA1	Message	Date
Joshua Colp	cc26efece3	Merge "sip_to_pjsip: Migrate IPv4/IPv6 (Dual Stack) configurations."	9 years ago
zuul	e7d06a8097	Merge "res_pjsip: Default endpoints to the "offline" status."	10 years ago
zuul	e91fc62f80	Merge "pjproject_bundled: Disable srtp use by pjmedia"	10 years ago
zuul	b869bf0f38	Merge "pbx.c: Prevent infinite recursion in manager_show_dialplan_helper."	10 years ago
zuul	8bdd5b63df	Merge "app_queue: Ensure member is removed from pending when hanging up."	10 years ago
zuul	b0b480592a	Merge "app_macro: Consider '~~s~~' as a macro start extension."	10 years ago
Mark Michelson	c98a047ee6	res_pjsip: Default endpoints to the "offline" status. A recent change attempted to optimize startup by not updating contact status. Instead, code responsible for qualifying contacts updates the status as it becomes known. The code even accounts for contacts/AORs that are not set to be qualified. The problem, though, is when there are no contacts associated with an endpoint. A common case is when an endpoint is set to register its contacts but has not done so yet. In this case, prior to registration, the endpoint's device state will appear to be "not in use" and hints associated with that device will appear to be "idle". In actuality, the device state and hint should both appear as "unavailable". The reason for the failure is that the optimization change made all persistent endpoint states set to "unknown". The fix here is to change the hard-coded "unknown" to be "offline" instead. The default state will be offline until the qualifying code determines that the contact is actually online. This way, if there are no contacts at all, then the state stays as offline, and device state and hints appear correctly. ASTERISK-26269 #close Reported by nappsoft Change-Id: Ie99b84169393983453076f5e9c0d35ff313a456a	10 years ago
Etienne Lessard	5e0758575c	pbx.c: Prevent infinite recursion in manager_show_dialplan_helper. Previously, if context A was including context B and context B was including context A, i.e. if there was a circular dependency between contexts, then calling manager_show_dialplan_helper could lead to an infinite recursion, resulting in a crash. This commit applies the same solution as the one implemented in the show_dialplan_helper function. The manager_show_dialplan_helper and show_dialplan_helper functions contain lots of code in common, but the former was missing the "infinite recursion avoidance" code. ASTERISK-26226 #close Change-Id: I1aea85133c21787226f4f8442253a93000aa0897	10 years ago
Joshua Colp	c21e6764f1	app_queue: Ensure member is removed from pending when hanging up. When dialing channels it is possible that they may not ever leave the not in use state (Local channels in particular) by the time we cancel them. If this occurs but we know they were dialed we explicitly remove them from the pending members container so that subsequent call attempts occur. ASTERISK-26299 #close Change-Id: I6ad0d17c36480c92cebf840626228ce3f7e4bd65	10 years ago
zuul	90b7f7fdb5	Merge "res_pjsip: Cache global config options."	10 years ago
zuul	4d06f4621a	Merge "channel: No hung-up on failing security requirements."	10 years ago
George Joseph	a7487e9261	pjproject_bundled: Disable srtp use by pjmedia The reason for the disable is that while Asterisk works fine with older libsrtp versions, newer versions of pjproject won't compile with them. Debian 6 for instance, has libsrtp 1.4.4 which is older than what pjproject is expecting. We don't use most of pjmedia but we DO use it for SDP negotiation. Luckily disabling srtp in pjmedia doesn't interfere with it's ability to negitiate a secure channel. The proper crypto attributes are negotiated in both directions. ASTERISK-26279 #close Change-Id: Id25a92cdf3df97a26c53cffae65b6b82de33c8e2	10 years ago
Joshua Colp	4a8bdfc49b	Merge "res_fax: Fix deadlock in ast_channel_get_t38_state()."	10 years ago
Joshua Colp	179e8c15c8	Merge "res_fax: Fix deadlock setting FAXMODE channel variable."	10 years ago
Joshua Colp	383b35fca7	Merge "res_fax.c: Fix deadlock in fax_gateway_indicate_t38()."	10 years ago
Joshua Colp	25e9356bb9	Merge "res_fax.c: Add chan locked precondition comments."	10 years ago
Joshua Colp	44b8cc8b48	Merge "ast_framehook_detach() must be called with the channel locked."	10 years ago
zuul	795532b2d5	Merge "ast_framehook_attach() must be called with the channel locked."	10 years ago
zuul	c82cef8441	Merge "Fix checks for allocation debugging."	10 years ago
zuul	e3e08e1131	Merge "Fix naming mismatch of allocator functions."	10 years ago
Alexander Traud	858fa5eb2c	channel: No hung-up on failing security requirements. In your Diaplan, if you specify same => n,Set(CHANNEL(secure_bridge_media)=1) same => n,Set(CHANNEL(secure_bridge_signaling)=1) only the SIP channel driver chan_sip supports this. All other channels drivers like res_pjsip fail. In case of failure, the original sRTP source code released the whole channel, even if not hung-up, yet. This change does not release the channel but instead hangs-up the channel. ASTERISK-26306 Change-Id: I0489f0cb660fab6673b0db8af027d116e70a66db	10 years ago
Alexander Traud	f35501b8c9	sip_to_pjsip: Migrate IPv4/IPv6 (Dual Stack) configurations. When using the migration script sip_to_pjsip.py, and your sip.conf is configured with bindaddr=::, two transports are written to pjsip.conf, one for 0.0.0.0 (IPv4) and one for [::] (IPv6). That way, PJProject listens on the IPv4 and IPv6 wildcards; a IPv4/IPv6 Dual Stack configuration on a single interface like in chan_sip. Furthermore, the script internal functions "build_host" and "split_hostport" did not parse Literal IPv6 addresses as expected (like [::1]:5060). This change makes sure, even such addresses are parsed correctly. ASTERISK-26309 Change-Id: Ia4799a0f80fc30c0550fc373efc207c3330aeb48	10 years ago
Richard Mudgett	ea929d766d	res_pjsip: Cache global config options. We may check a global config option hundreds of times a second or more. Asking sorcery for the global configuration from the config files backend involves several allocations and container traversals. Using realtime without a memory cache is a lot worse because you have to lookup in the realtime database each time to reconstitute the sorcery object. With a memory cache for realtime, there is about the same amount of overhead as for config files. Either way, it is still fairly expensive to access the sorcery object that much. * Cache the global config options so we can access them faster. You must now always perform a res_pjsip reload to change the global options. Change-Id: Ice16c7a4cbca4614da344aaea21a072b86263ef7	10 years ago
Richard Mudgett	5eb6cb969f	res_fax: Fix deadlock in ast_channel_get_t38_state(). ast_channel_get_t38_state() calls ast_channel_queryoption() with AST_OPTION_T38_STATE. If the passed in channel is a local channel then a deadlock can happen if a channel lock is held when called. * Made ast_channel_get_t38_state() callers not hold a channel lock before calling. * Update ast_channel_get_t38_state() doxygen to note that no channel locks can be held when calling the function. ASTERISK-26203 #close Reported by: Etienne Lessard ASTERISK-24822 #close Reported by: David Brillert ASTERISK-22732 #close Reported by: Richard Mudgett Change-Id: I49fd76fa9af628b4198009b5c0b82c8b03681214	10 years ago
Richard Mudgett	277a2d667a	res_fax: Fix deadlock setting FAXMODE channel variable. ASTERISK-25980 added the FAXMODE channel variable to res_fax.c. Unfortunately, it also introduced a deadlock potential because set_channel_variables() which sets FAXMODE can be called during a masquerade. The ast_channel_get_t38_state() which gets the value used to set FAXMODE cannot be called with the channel locked. As a result, local channels can deadlock because of how they must acquire the locks necessary to operate. The intent of FAXMODE is for dialplan to know how a fax was transferred after the fax completes. However, the previous patch sets FAXMODE to the channel's current T.38 state AFTER the fax has completed and where T.38 may have already disconnected. * Set FAXMODE based upon T.38 negotiations exchanged either with the fax applications or the fax framehooks. ASTERISK-26203 Reported by: Etienne Lessard ASTERISK-24822 Reported by: David Brillert ASTERISK-22732 Reported by: Richard Mudgett Change-Id: Id525747254b64c1efe8b1b5973d52ff9719c2ae1	10 years ago
Richard Mudgett	edca14c8a5	res_fax.c: Fix deadlock in fax_gateway_indicate_t38(). fax_gateway_indicate_t38() calls ast_indicate_data() which cannot be called with any channel locks already held. A deadlock can happen if the function is operating on a local channel. * Made fax_gateway_indicate_t38() unlock the channel before calling ast_indicate_data() since fax_gateway_indicate_t38() is always called with the channel locked. * Made fax_gateway_indicate_t38() return void since nothing cared about its return value. ASTERISK-26203 Reported by: Etienne Lessard ASTERISK-24822 Reported by: David Brillert ASTERISK-22732 Reported by: Richard Mudgett Change-Id: I701ff2d26c5fc23e0d5a48a3fd98759a9fd09407	10 years ago
Richard Mudgett	141cd42880	res_fax.c: Add chan locked precondition comments. Change-Id: Ic10ae434536bbf7fb7055d6ab36cc50b8748a4e7	10 years ago
Richard Mudgett	b86771d1bf	ast_framehook_detach() must be called with the channel locked. The framehook container could become corrupted if the channel lock is not held before calling. Change-Id: If0a1c7ba0484ed3a191106a7516526b905952584	10 years ago
Richard Mudgett	5744f434f0	ast_framehook_attach() must be called with the channel locked. The framehook container could become corrupted if the channel lock is not held before calling. Change-Id: I1a6b957a1f7b899eb29a186915f8cccab886a438	10 years ago
chrisderock	93b7533d74	app_macro: Consider '~~s~~' as a macro start extension. As described in issue ASTERISK-26282 the AEL parser creates macros with extension '~~s~~'. app_macro searches only for extension 's' so the created extension cannot be found. with this patch app_macro searches for both extensions and performs the right extension. ASTERISK-26282 #close Change-Id: I939aa2a694148cc1054dd75ec0c47c47f47c90fb	10 years ago
varnav	d2e03c252d	chan_iax2: Set plaintext auth to deprecated as per ASTERISK-22820 Starting from draft 2 of RFC 5456 (October 23, 2006) plaintext auth is not supported in IAX2 protocol. Please refer to section 8.6.13 of RFC 5456. But plaintext auth is still supported by Asterisk implementation of IAX2. This support should be dropped. Patch, based on asterisk-dev discussion, adds deprecation warning on startup if 'auth' is set to 'plaintext', changes default values of 'auth' from 'md5, plaintext' to 'md5'. Patch is safe in terms of backwards compatibility, will work even if remote peers have auth=plaintext and we have defaults. auth=plaintext setting will remain deprecated in Asterisk 14 and 15, and IAX2 plaintext support will be removed in Asterisk 16. ASTERISK-22820 #close Change-Id: I5d2f3830cb57645604818f87518916e8a5c317bf	10 years ago
George Joseph	e40aa40aca	res_rtp_multicast: Fix SEGV in ast_multicast_rtp_create_options ast_multicast_rtp_create_options now checks for NULL or empty options Change-Id: Ib845eae46a67a9787e89a87ebd1027344e5e0362	10 years ago
Mark Michelson	ded22c712a	ConfBridge: Rework announcer channel methodology NOTE: This patch was submitted earlier and reverted because of a failing test. The test has been patched so that it adjusts for the changes here, so this is being resubmitted for review. One feature that confbridge has is the ability to play sounds to all participants in the conference. Prior to this commit, the algorithm for this was as follows: * Grab the playback lock * Push the conference announcer channel into the bridge * Play back the sound * Pull the conference announcer channel from the bridge * Release the playback lock The issue here is that the act of adding the playback channel to the bridge and removing it for each announcement is expensive. Amongst the expenses: * The announcer channel is imparted into the bridge, meaning a new thread is spun up for each playback. * When the announcer is added or removed from the bridge, it results in the BRIDGEPEER channel variable being set on all channels in the bridge. This requires keeping the bridge locked and locking each individual channel in order to set it. * There's also just the general overhead of adding the channel and removing it from the bridge. The bridge potentially has to reconfigure every single time With this commit, the paradigm for playing back announcements has shifted. * The announcer channel is now added to the bridge when the conference is allocated, and it is hung up when the conference is destroyed. * A taskprocessor is used to queue playbacks onto the announcer channel. This keeps the behavior from before where playbacks do not overlap. * The announcer channel is no longer placed into the bridge as departable. Since we are not constantly removing the channel from the bridge, it is safe to add the channel using an independent thread and simply hang the channel up when it is time for the conference to be destroyed. The use of the taskprocessor for playbacks opens up the interesting possibility of having asynchronous announcements played. In this commit, however, the behavior is still exactly the same as it previously was. ASTERISK-26289 Reported by Mark Michelson Change-Id: Ica9fa4907c2f3728cdd1cf0bc564ef4eb40754a0	10 years ago
Joshua Colp	11ef7f34bf	Merge "Revert "ConfBridge: Rework announcer channel methodology""	10 years ago
Joshua Colp	065d810d3f	Revert "ConfBridge: Rework announcer channel methodology" This reverts commit `5aa8773052`. Change-Id: I9ab45776e54a54ecf1bac9ae62d976dec30ef491	10 years ago
zuul	c9df806f24	Merge "ConfBridge: Rework announcer channel methodology"	10 years ago
zuul	4913fe3825	Merge "followme: initialize all config items on reload"	10 years ago
zuul	27813c7439	Merge "compilation failed with -Werror=maybe-uninitialized"	10 years ago
zuul	47c9acb5b2	Merge "res_odbc_transaction: add dep on generic_odbc"	10 years ago
Joshua Colp	9dd3d416cc	Merge "pjproject_bundled: Allow IPv4/IPv6 (Dual Stack) configurations."	10 years ago
Alexei Gradinari	41ee14bfae	compilation failed with -Werror=maybe-uninitialized The compilation failed for devmode --enable DONT_OPTIMIZE --enable BETTER_BACKTRACES --enable DO_CRASH --enable TEST_FRAMEWORK res_pjsip/pjsip_configuration.c: In function dtls_handler: res_pjsip/pjsip_configuration.c:974:20: error: back may be used uninitialized in this function [-Werror=maybe-uninitialized] int size = strlen(front); ^ cc1: all warnings being treated as errors Change-Id: I7f082ead0312792a577ec7c73015ba64dabca580	10 years ago
zuul	d6b5f1b951	Merge "res_ari: Add http prefix to generated docs"	10 years ago
David M. Lee	eb0c9c476f	res_odbc_transaction: add dep on generic_odbc When res_odbc_transaction depended on res_odbc, it got the generic_odbc headers and libs implicitly. Now that it no longer depends on res_odbc, its dependency on generic_odbc must be explicit. Change-Id: I9db88f7af7388437f49903d3008ba8d4890d5911	10 years ago
Alexander Traud	12752c64cc	pjproject_bundled: Allow IPv4/IPv6 (Dual Stack) configurations. PJProject supports a lot of platforms even Windows, some with different defaults when it comes to IPv6. In many Linux platforms like Ubuntu 16.04 LTS, "/proc/sys/net/ipv6/bindv6only" is set to 0 (false). Different than in Windows. Because of this, if configured with just an IPv6 address/transport, PJProject listens to both IPv4 and IPv6. However, this is not supported by the PJProject team. As consequence, you end-up with IPv4-mapped IPv6 addresses in SDP, incompatible with IPv4-only clients. Technically, you end-up with an IPv6-only server which accepts incoming connections on IPv4. If you try to configure two transports, one with IPv4 and one with IPv6 on the same interface, as expected by the PJProject team, the IPv4 transport is not able to bind because the IPv6 transport listens to both already. One solution would be to change "/proc/sys/net/ipv6/bindv6only" system-wide. Then, you are able to configure two transports, one for each IP version on the same interface. That way, you get a server which works with IPv4 clients and IPv6 clients at the same time over the same interface. Here, this change sets this parameter directly within PJProject to match the expectations of the PJProject team in any case. This allows IPv4/IPv6 Dual Stack servers out of the box like in chan_sip. This change was accepted by the PJProject team as <http://trac.pjsip.org/repos/changeset/5403> and is expected to arrive in the next version, PJProject 2.6.0. Until then, this change is incorporated in the bundled PJProject of Asterisk. ASTERISK-26309 Change-Id: I3335d8718f79f4b2feae91b5b005a3ce684a63ae	10 years ago
Corey Farrell	55ccdf93c3	Fix checks for allocation debugging. MALLOC_DEBUG should not be used to check if debugging is actually enabled, __AST_DEBUG_MALLOC should be used instead. MALLOC_DEBUG only indicates that debugging is requested, __AST_DEBUG_MALLOC indicates it is active. Change-Id: I3ce9cdb6ec91b74ee1302941328462231be1ea53	10 years ago
Corey Farrell	8061d9f66f	Fix naming mismatch of allocator functions. Allocator functions that take file/line/func parameters are prefixed with single-underscore when MALLOC_DEBUG is not defined, double-underscore when it is defined. This change updates all allocators that accept file/line/func to have the same prototype in either ABI mode. The parameter order of __ast_vasprintf and __ast_asprintf in utils.h have been changed to match that of astmm.h. End-use allocator macro's have been removed from astmm.h and moved to an unconditional part of utils.h. Change-Id: I823bb6ce2b5675b3a4735948f10a3b420e9a023a	10 years ago
zuul	c6ed91a9c8	Merge "sip_to_pjsip: Map externhost/ip to Transports."	10 years ago
Torrey Searle	c1b6a79686	res_ari: Add http prefix to generated docs updated the uri handler to include the url prefix of the http server this enables res_ari to add it to the uris when generating docs Change-Id: I279335a2625261a8492206c37219698f42591c2e (cherry picked from commit `6f448f32fe`)	10 years ago
zuul	2b057d6215	Merge "res_odbc: Correct the dependency relationship with res_odbc_transaction"	10 years ago
zuul	1c64616373	Merge "sip.conf: tlsclientmethod is using sslv23 as default."	10 years ago

1 2 3 4 5 ...

28408 Commits (cc26efece34dd9beab75dff00360f70abfd17736) All Branches Search

28408 Commits (cc26efece34dd9beab75dff00360f70abfd17736)

All Branches