This commit adds res_pjsip_geolocation which gives chan_pjsip
the ability to use the core geolocation capabilities.
This commit message is intentionally short because this isn't
a simple capability. See the documentation at
https://wiki.asterisk.org/wiki/display/AST/Geolocation
for more information.
THE CAPABILITIES IMPLEMENTED HERE MAY CHANGE BASED ON
USER FEEDBACK!
ASTERISK-30128
Change-Id: Ie2e2bcd87243c2cfabc43eb823d4427c7086f4d9
This commit adds res_geolocation which creates the core capabilities
to manipulate Geolocation information on SIP INVITEs.
An upcoming commit will add res_pjsip_geolocation which will
allow the capabilities to be used with the pjsip channel driver.
This commit message is intentionally short because this isn't
a simple capability. See the documentation at
https://wiki.asterisk.org/wiki/display/AST/Geolocation
for more information.
THE CAPABILITIES IMPLEMENTED HERE MAY CHANGE BASED ON
USER FEEDBACK!
ASTERISK-30127
Change-Id: Ibfde963121b1ecf57fd98ee7060c4f0808416303
Rightly the use of wildcards in certificates is disallowed in accordance
with RFC5922. However, RFC2818 does make some allowances with regards to
their use when using subject alt names with DNS name types.
As such this patch creates a new setting for TLS transports called
'allow_wildcard_certs', which when it and 'verify_server' are both enabled
allows DNS name types, as well as the common name that start with '*.'
to match as a wildcard.
For instance: *.example.com
will match for: foo.example.com
Partial matching is not allowed, e.g. f*.example.com, foo.*.com, etc...
And the starting wildcard only matches for a single level.
For instance: *.example.com
will NOT match for: foo.bar.example.com
The new setting is disabled by default.
ASTERISK-30072 #close
Change-Id: If0be3fdab2e09c2a66bb54824fca406ebaac3da4
Currently, PJSIP will randomly wait up to 10 seconds for each
outbound registration's initial attempt. The reason for this
is to avoid having all outbound registrations attempt to register
simultaneously.
This can create limitations with the test suite where we need to
be able to receive inbound calls potentially within 10 seconds of
starting up. For instance, we might register to another server
and then try to receive a call through the registration, but if
the registration hasn't happened yet, this will fail, and hence
this inconsistent behavior can cause tests to fail. Ultimately,
this requires a smaller random value because there may be no good
reason to wait for up to 10 seconds in these circumstances.
To address this, a new config option is introduced which makes this
maximum delay configurable. This allows, for instance, this to be
set to a very small value in test systems to ensure that registrations
happen immediately without an unnecessary delay, and can be used more
generally to control how "tight" the initial outbound registrations
are.
ASTERISK-29965 #close
Change-Id: Iab989a8e94323e645f3a21cbb6082287c7b2f3fd
Added the hear_own_join_sound option to the confbridge user profile to
control who hears the sound_join audio file. When set to 'yes' the user
entering the conference and the participants already in the conference
will hear the sound_join audio file. When set to 'no' the user entering
the conference will not hear the sound_join audio file, but the
participants already in the conference will hear the sound_join audio
file.
ASTERISK-29931
Added by Michael Cargile
Change-Id: I856bd66dc0dfa057323860a6418c1371d249abd2
Currently, if any custom ring cadences are specified, they are
appended to the array of cadences from wherever we left off
last time. This works properly the first time, but on subsequent
dahdi restarts, it means that the existing cadences are left
alone and (most likely) the same cadences are then re-added
afterwards. In short order, the cadence array gets maxed out
and the user begins seeing warnings that the array is full
and no more cadences may be added.
This buggy behavior persists until Asterisk is completely
restarted; however, if and when dahdi restart is run again,
then the same problem is reintroduced.
This fixes this behavior so that cadence parsing is more
idempotent, that is so running dahdi restart multiple times
starts adding cadences from the beginning, rather than from
wherever the last cadence was added.
As before, it is still not possible to revert to the default
cadences by simply removing all cadences in this manner, nor
is it possible to delete existing cadences. However, this
does make it possible to update existing cadences, which
was not possible before, and also ensures that the cadences
remain unchanged if the config remains unchanged.
ASTERISK-29990 #close
Change-Id: Ie32ea3e8a243b766756b1afce684d4a31ee7421d
Removes a couple sample config files for modules
which have since been removed from Asterisk.
ASTERISK-30008 #close
Change-Id: I6be89cafc6c575d98a5315e4912b61a833aacf52
added new global config option "allow_sending_180_after_183"
that if enabled will preserve 180 after a 183
ASTERISK-29842
Change-Id: I8a53f8c35595b6d16d8e86e241b5f110d92f3d18
Add framework to connect to, and read and write protocol based
messages from and to an external application using an Asterisk
External Application Protocol (AEAP). This has been divided into
several abstractions:
1. transport - base communication layer (currently websocket only)
2. message - AEAP description and data (currently JSON only)
3. transaction - links/binds requests and responses
4. aeap - transport, message, and transaction handler/manager
This patch also adds an AEAP implementation for speech to text.
Existing speech API callbacks for speech to text have been completed
making it possible for Asterisk to connect to a configured external
translator service and provide audio for STT. Results can also be
received from the external translator, and made available as speech
results in Asterisk.
Unit tests have also been created that test the AEAP framework, and
also the speech to text implementation.
ASTERISK-29726 #close
Change-Id: Iaa4b259f84aa63501e5fd2a6fb107f900b4d4ed2
The async_operations setting on a transport configures how
many simultaneous incoming packets the transport can handle
when multiple threads are polling and waiting on the transport.
As we only use a single thread this was needlessly creating
incoming packets when set to a non-default value, wasting memory.
ASTERISK-30006
Change-Id: I1915973ef352862dc2852a6ba4cfce2ed536e68f
Adds a new configuration option, stir_shaken_profile, in pjsip.conf that
can be specified on a per endpoint basis. This option will reference a
stir_shaken_profile that can be configured in stir_shaken.conf. The type
of this option must be 'profile'. The stir_shaken option can be
specified on this object with the same values as before (attest, verify,
on), but it cannot be off since having the profile itself implies wanting
STIR/SHAKEN support. You can also specify an ACL from acl.conf (along
with permit and deny lines in the object itself) that will be used to
limit what interfaces Asterisk will attempt to retrieve information from
when reading the Identity header.
ASTERISK-29476
Change-Id: I87fa61f78a9ea0cd42530691a30da3c781842406
Some databases depending on their configuration using backslashes
for escaping. When combined with the use of ' this can result in
a broken func_odbc query.
This change adds a SQL_ESC_BACKSLASHES dialplan function which can
be used to escape the backslashes.
This is done as a dialplan function instead of being always done
as some databases do not require this, and always doing it would
result in incorrect data being put into the database.
ASTERISK-29838
Change-Id: I152bf34899b96ddb09cca3e767254d8d78f0c83d
Adds the m option to the Queue application, which allows a
music on hold class to be specified at runtime which will
override the class configured in queues.conf.
This option functions like the m option to Dial.
ASTERISK-29876 #close
Change-Id: Ie25a48569cf8755c305c9438b1ed292c3adcf8d7
Removes some leftover build and config references to
modules that have since been removed from Asterisk.
ASTERISK-29935 #close
Change-Id: Iaefc73a23f4b2de3c6c14d928050135b6d0ef6af
pbx.digium.com no longer accepts IAX2 calls and
there are no plans for it to come back.
Accordingly, nonworking IAX2 URIs are removed from
both the LICENSE file and the sample config.
ASTERISK-29923 #close
Change-Id: I257c54d4d812ed6b4bd4cbec2cd7ebe2b87b5bad
Whereas BLFs allow to show a display name for each RLS entry,
the asterisk provides only the extension now.
This is not end user friendly.
This commit adds a new resource_list option, resource_display_name,
to indicate whether display name of resource or the resource name being
provided for RLS entries.
If this option is enabled, the Display Name will be provided.
This option is disabled by default to remain the previous behavior.
If the 'event' set to 'presence' or 'dialog' the non-empty HINT name
will be set as the Display Name.
The 'message-summary' is not supported yet.
ASTERISK-29891 #close
Change-Id: Ic5306bd5a7c73d03f5477fe235e9b0f41c69c681
The disabledevents setting has been added to the general section
in manager.conf, which allows users to specify events that
should be globally disabled and not sent to any AMI listeners.
This allows for processing of these AMI events to end sooner and,
for frequent AMI events such as Newexten which users may not have
any need for, allows them to not be processed. Additionally, it also
cleans up core debug as previously when debug was 3 or higher,
the debug was constantly spammed by "Analyzing AMI event" messages
along with a complete dump of the event contents (often for Newexten).
ASTERISK-29853 #close
Change-Id: Id42b9a3722a1f460d745cad1ebc47c537fd4f205
added res_pjsip_outbound_registration to .requires in AST_MODULE_INFO
which fixes issue with module crashes on load "FRACK!, Failed assertion"
ASTERISK-29871
Change-Id: Ia0f49d048427a40e1b763296b834a52a03610096
Adds a new option, defaultenabled, to the CDR core to
control whether or not CDR is enabled on a newly created
channel. This allows CDR to be disabled by default on
new channels and require the user to explicitly enable
CDR if desired. Existing behavior remains unchanged.
ASTERISK-29808 #close
Change-Id: Ibb78c11974bda229bbb7004b64761980e0b2c6d1
Fixes 12pm noon incorrectly returning 0/a.m.
Also fixes a misspelling typo in the config.
ASTERISK-29695 #close
Change-Id: Ie40f9618636eb4c483b449bd707a5dcffca5c406
Includes some minor updates to extensions.conf
and iax.conf. In particular, the demonstration
of macros in extensions.conf is removed, as
Macro is deprecated and will be removed soon.
These examples have been replaced with examples
demonstrating the usage of Gosub instead.
The older exten => ...,n syntax is also mostly
replaced with the same keyword to demonstrate the
newer, more concise way of defining extensions.
IAXTEL no longer exists, so this example is replaced
with something more generic.
Some documentation is also added to extensions.conf
and iax.conf to clarify some of the new expanded
encryption capabilities with IAX2.
ASTERISK-29758 #close
Change-Id: I04fba9671aa1ee9ba1bd5027061f80bbe38e7b46
Correct typos of the following word families:
password
excludes
undesirable
checksums
through
screening
interpreting
database
causes
initiation
member
busydetect
defined
severely
throughput
recognized
counter
require
indefinitely
accounts
ASTERISK-29714
Change-Id: Ie8f2a7b274a162dd627ee6a2165f5e8a3876527e
The search for a running asterisk when --running is used
has been greatly simplified and in the event it doesn't
work, you can now specify a pid to use on the command
line with --pid.
The search for asterisk modules when --tarball-coredumps
is used has been enhanced to have a better chance of finding
them and in the event it doesn't work, you can now specify
--libdir on the command line to indicate the library directory
where they were installed.
The DATEFORMAT variable was renamed to DATEOPTS and is now
passed to the 'date' utility rather than running DATEFORMAT
as a command.
The coredump and output files are now renamed with DATEOPTS.
This can be disabled by specifying --no-rename.
Several confusing and conflicting options were removed:
--append-coredumps
--conffile
--no-default-search
--tarball-uniqueid
The script was re-structured to make it easier for follow.
Change-Id: I674be64bdde3ef310b6a551d4911c3b600ffee59
In res_pjsip_sdp_rtp, the bind_rtp_to_media_address option and the
fallback use of the transport's bind address solve problems sending
media on systems that cannot send ipv4 packets on ipv6 sockets, and
certain other situations. This change extends both of these behaviors
to UDPTL sessions as well in res_pjsip_t38, to fix fax-specific
problems on these systems, introducing a new option
endpoint/t38_bind_udptl_to_media_address.
ASTERISK-29402
Change-Id: I87220c0e9cdd2fe9d156846cb906debe08c63557
The behavior of max_contacts and remove_existing are connected. If
remove_existing is enabled, the soonest expiring contacts are removed.
This may occur when there is an unavailable contact. Similarly,
when remove_existing is not enabled, registrations from good
endpoints are rejected in favor of retaining unavailable contacts.
This commit adds a new AOR option remove_unavailable, and the effect
of this setting will depend on remove_existing. If remove_existing
is set to no, we will still remove unavailable contacts when they
exceed max_contacts, if there are any. If remove_existing is set to
yes, we will prioritize the removal of unavailable contacts before
those that are expiring soonest.
ASTERISK-29525
Change-Id: Ia2711b08f2b4d1177411b1be23e970d7fdff5784
Adds the ability for users to log to custom log levels
by providing custom log level names in logger.conf. Also
adds a logger show levels CLI command.
ASTERISK-29529
Change-Id: If082703cf81a436ae5a565c75225fa8c0554b702
This allows the STUN server to change its IP address without having to
reload the res_rtp_asterisk module.
The refresh of the name resolution occurs first when the module is
loaded, then recurringly, slightly after the previous DNS answer TTL
expires.
ASTERISK-29508 #close
Change-Id: I7955a046293f913ba121bbd82153b04439e3465f
This changeset is intended to address compatibility issues encountered
when interfacing Asterisk to electromechanical telephone switches that
implement ANI-B, ANI-C, or ANI-D.
In particular the behaviours that this impacts include:
- FGC-CAMA did not work at all when using MF signaling. Modified the
switch case block to send calls to the correct part of the
signaling-handling state machine.
- For FGC-CAMA operation, the delay between called number ST and
second wink for ANI spill has been made configurable; previously
all calls were made to wait for one full second.
- After the ANI spill, previous behavior was to require a 'ST' tone
to advance the call. This has been changed to allow 'STP' 'ST2P'
or 'ST3P' as well, for compatibility with ANI-D.
- Store ANI2 (ANI INFO) digits in the CALLERID(ANI2) channel variable.
- For calls with an ANI failure, No. 1 Crossbar switches will send
forward a single-digit failure code, with no calling number digits
and no ST pulse to terminate the spill. I've made the ANI timeout
configurable so to reduce dead air time on calls with ANI fail.
- ANI info digits configurable. Modern digital switches will send 2
digits, but ANI-B sends only a single info digit. This caused the
ANI reported by Asterisk to be misaligned.
- Changed a confusing log message to be more informative.
ASTERISK-29518
Change-Id: Ib7e27d987aee4ed9bc3663c57ef413e21b404256
Allow mapping pjproject log messages to the Asterisk TRACE
log level. The defaults were also changes to log pjproject
levels 3,4 to DEBUG and 5,6 to TRACE. Previously 3,4,5,6
all went to DEBUG.
ASTERISK-29582
Change-Id: I859a37a8dec263ed68099709cfbd3e665324c72d
Meter types are not well supported,
lacking support in telegraf, datadog and the official statsd servers.
We deprecate meters and provide a compliant fallback for any existing usages.
A flag has been introduced to allow meters to fallback to counters.
ASTERISK-29513
Change-Id: I5fcb385983a1b88f03696ff30a26b55c546a1dd7
A new user option, answer_channel, adds the capability to
prevent answering the channel if it hasn't already been
answered yet.
ASTERISK-29440
Change-Id: I26642729d0345f178c7b8045506605c8402de54b
By default Asterisk reports the PJSIP version in a SOFTWARE attribute
of every STUN packet it sends. This may not be desired in a production
environment, and RFC5389 recommends making the use of the SOFTWARE
attribute a configurable option:
https://datatracker.ietf.org/doc/html/rfc5389#section-16.1.2
This patch adds a `stun_software_attribute` yes/no option to make it
possible to omit the SOFTWARE attribute from STUN packets.
ASTERISK-29434
Change-Id: Id3f2b1dd9584536ebb3a1d7e8395fd8b3e46860b
RFC7616 and RFC8760 allow more than one WWW-Authenticate or
Proxy-Authenticate header per realm, each with different digest
algorithms (including new ones like SHA-256 and SHA-512-256).
Thankfully however a UAS can NOT send back multiple Authenticate
headers for the same realm with the same digest algorithm. The
UAS is also supposed to send the headers in order of preference
with the first one being the most preferred. We're supposed to
send an Authorization header for the first one we encounter for a
realm that we can support.
The UAS can also send multiple realms, especially when it's a
proxy that has forked the request in which case the proxy will
aggregate all of the Authenticate headers and then send them all
back to the UAC.
It doesn't stop there though... Each realm can require a
different username from the others. There's also nothing
preventing each digest algorithm from having a unique password
although I'm not sure if that adds any benefit.
So now... For each Authenticate header we encounter, we have to
determine if we support the digest algorithm and, if not, just
skip the header. We then have to find an auth object that
matches the realm AND the digest algorithm or find a wildcard
object that matches the digest algorithm. If we find one, we add
it to the results vector and read the next Authenticate header.
If the next header is for the same realm AND we already added an
auth object for that realm, we skip the header. Otherwise we
repeat the process for the next header.
In the end, we'll have accumulated a list of credentials we can
pass to pjproject that it can use to add Authentication headers
to a request.
NOTE: Neither we nor pjproject can currently handle digest
algorithms other than MD5. We don't even have a place for it in
the ast_sip_auth object. For this reason, we just skip processing
any Authenticate header that's not MD5. When we support the
others, we'll move the check into the loop that searches the
objects.
Changes:
* Added a new API ast_sip_retrieve_auths_vector() that takes in
a vector of auth ids (usually supplied on a call to
ast_sip_create_request_with_auth()) and populates another
vector with the actual objects.
* Refactored res_pjsip_outbound_authenticator_digest to handle
multiple Authenticate headers and set the stage for handling
additional digest algorithms.
* Added a pjproject patch that allows them to ignore digest
algorithms they don't support. This patch has already been
merged upstream.
* Updated documentation for auth objects in the XML and
in pjsip.conf.sample.
* Although res_pjsip_authenticator_digest isn't affected
by this change, some debugging and a testsuite AMI event
was added to facilitate testing.
Discovered during OpenSIPit 2021.
ASTERISK-29397
Change-Id: I3aef5ce4fe1d27e48d61268520f284d15d650281
Although Asterisk can receive and propogate flash events, it currently
provides no mechanism for doing anything with them itself.
This AMI event allows flash events to be processed by Asterisk.
Additionally, AST_CONTROL_FLASH is included in a switch statement
in channel.c to avoid throwing a warning when we shouldn't.
ASTERISK-29380
Change-Id: Ie17ffe65086e0282c88542e38eed6a461ec79e81
STIR/SHAKEN encodes using base64 URL format. Currently, we just use
base64. New functions have been added that convert to and from base64
encoding.
The origid field should also be an UUID. This means there's no reason to
have it as an option in stir_shaken.conf, as we can simply generate one
when creating the Identity header.
https://wiki.asterisk.org/wiki/display/AST/OpenSIPit+2021
Change-Id: Icf094a2a54e87db91d6b12244c9f5ba4fc2e0b8c
During OpenSIPit, we found out that the public certificates must be of
type X.509. When reading in public keys, we use the corresponding X.509
functions now.
We also discovered that we needed a better naming scheme for the
certificates since certificates with the same name would cause issues
(overwriting certs, etc.). Now when we download a public certificate, we
get the serial number from it and use that as the name of the cached
certificate.
The configuration option public_key_url in stir_shaken.conf has also
been renamed to public_cert_url, which better describes what the option
is for.
https://wiki.asterisk.org/wiki/display/AST/OpenSIPit+2021
Change-Id: Ia00b20835f5f976e3603797f2f2fb19672d8114d
Added support for a basic AEAP configuration read from aeap.conf.
Also added 2 CLI commands for showing individual configurations as
well as all of them: aeap show server <id> and aeap show servers.
Only one configuration option is required at the moment, and that one is
server_url. It must be a websocket URL. The other option, codecs, is
optional and will be used over the codecs specified on the endpoint if
provided.
https://wiki.asterisk.org/wiki/pages/viewpage.action?pageId=45482453
Change-Id: I567ac5148c92b98d29d2ad83421b416b75ffdaa3
Added .log extension to the sample logs in logger.conf.sample so that
they will be able to be opened in the browser when attached to JIRA
tickets. Because of this, asterisk.logrotate has also been updated to
look for .log extensions instead of no extension for log files such as
full and messages.
Change-Id: I5de743c03f08047d6c6cc80cac5019ae0c4c200f
Also removed the sample documentation, and some oddly-placed
documentation about the timeout argument to the Queue() application
itself. There is a large section on the timeout behavior below.
ASTERISK-26614 #close
Change-Id: I8f84e8304b50305b7c4cba2d9787a5d77c3a6217
minargs enables enforcing of minimum count of arguments to pass to
func_odbc, so if you're unconditionally using ARG1 through ARG4 then
this should be set to 4. func_odbc will generate an error in this case,
so for example
[FOO]
minargs = 4
and ODBC_FOO(a,b,c) in dialplan will now error out instead of using a
potentially leaked ARG4 from Gosub().
ARGC is needed if you're using optional argument, to verify whether or
not an argument has been passed, else it's possible to use a leaked ARGn
from Gosub (app_stack). So now you can safely do
${IF($[${ARGC}>3]?${ARGV}:default value)} kind of thing.
Change-Id: I6ca0b137d90b03f6aa9c496991f6cbf1518f6c24
Signed-off-by: Jaco Kroon <jaco@uls.co.za>
If there's no secret specified for an iax2 peer and there's no secret
specified in the dial string, Asterisk will crash if the auth method
requested by the peer is MD5 or plaintext. You also couldn't specify
a default auth method in the [general] section of iax.conf so if you
don't have static peers defined and just use the dial string, Asterisk
will still crash even if you have a secret specified in the dial string.
* Added logic to iax2_call() and authenticate_reply() to print
a warning and hanhup the call if encryption is requested and
there's no secret or auth method. This prevents the crash.
* Added the ability to specify a default "auth" in the [general]
section of iax.conf.
ASTERISK-29624
Reported by: N A
Change-Id: I5928e16137581f7d383fcc7fa04ad96c919e6254
As described in the issue, /tmp is not a suitable location for a
large amount of cached media files, since most distributions make
/tmp a RAM-based tmpfs mount with limited capacity.
I opted for a location that can be configured separately, as opposed
to using a subdirectory of spooldir, given the different storage
profile (transient files vs files that might stay there indefinitely).
This commit just makes the cache directory configurable, and changes
the default location from /tmp to /var/cache/asterisk.
ASTERISK-29143
Change-Id: Ic54e95199405abacd9e509cef5f08fa14c510b5d
Currently any response from res_curl where we get an answer from the
web server, regardless of what the response is (404, 403 etc.) Asterisk
currently treats it as a success. This patch allows you to set which
codes should be considered as a failure by Asterisk. If say we set
failurecodes=404,403 then when using curl in realtime if a server gives
a 404 error Asterisk will try to failover to the next option set in
extconfig.conf
ASTERISK-28825
Reported by: Dovid Bender
Code by: Gobinda Paul
Change-Id: I94443e508343e0a3e535e51ea6e0562767639987
This changes the outgoing offer call preference
default option to match the behavior of previous
versions of Asterisk.
The additional advanced codec negotiation options
have also been removed from the sample configuration
and marked as reserved for future functionality in
XML documentation.
The codec preference options have also been fixed to
enforce local codec configuration.
ASTERISK-29109
Change-Id: Iad19347bd5f3d89900c15ecddfebf5e20950a1c2
app_confbridge now has the ability to set the estimated bitrate on an
SFU bridge. To use it, set a bridge profile's remb_behavior to "force"
and set remb_estimated_bitrate to a rate in bits per second. The
remb_estimated_bitrate parameter is ignored if remb_behavior is something
other than "force".
Change-Id: Idce6464ff014a37ea3b82944452e56cc4d75ab0a
Since ASTERISK_27978 the default is not off but 90 seconds. That change
happened because ASTERISK_27347 disabled the keep-alives in the bundled
PJProject and Asterisk should behave the same as before.
Change-Id: Ie63dc558ade6a5a2b969c30a4bd492d63730dc46
Added a new log formatter called "plain" that always prints
file, function and line number if available (even for verbose
messages) and never prints color control characters. It also
doesn't apply any special formatting for verbose messages.
Most suitable for file output but can be used for other channels
as well.
You use it in logger.conf like so:
debug => [plain]debug
console => [plain]error,warning,debug,notice,pjsip_history
messages => [plain]warning,error,verbose
Change-Id: I4fdfe4089f66ce2f9cb29f3005522090dbb5243d
This change renames the codec preference endpoint options.
incoming_offer_codec_prefs becomes codec_prefs_incoming_offer
to keep the options together when showing an endpoint.
Change-Id: I6202965b4723777f22a83afcbbafcdafb1d11c8d
Added a new configuration option for PJSIP endpoints - stir_shaken. If
set to yes, then STIR/SHAKEN support will be added to inbound and
outbound INVITEs. The default is no. Alembic has been updated to include
this option.
Previously the dialplan function was not trimming the whitespace from
the parameters it recieved. Now it does.
Also added a conditional that, when TEST_FRAMEWORK is enabled, the
timestamp in the identity header will be overlooked. This is just for
testing, since the testsuite will rely on a SIPp scenario with a preset
identity header to trigger the MISMATCH result.
Change-Id: I43d67f1489b8c1c5729ed3ca8d71e35ddf438df1
If your queues.conf had _no_ [general] section, they would default to
'yes'. Now, they always default to 'no'.
(Actually, commit ed615afb7e already
partially fixed it for shared_lastcall.)
ASTERISK-28951
Change-Id: Ic39d8a0202906bc454194368bbfbae62990fe5f6
This commit adds the endpoint options required to control
Advanced Codec Negotiation.
incoming_offer_codec_prefs
outgoing_offer_codec_prefs
incoming_answer_codec_prefs
outgoing_answer_codec_prefs
The documentation may need tweaking and some additional edits
added, especially for the "answer" prefs. That'll be handled
when things finalize.
This commit is safe to merge as it doens't alter any existing
functionality nor does it alter the previous codec negotiation
work which may now be obsolete.
Change-Id: I920ba925d7dd36430dfd2ebd9d82d23f123d0e11
Currently when the pjsip making an outgoing request, it keep adding the
rport parameter in a request message as a default.
This causes unexpected rport handle at the other end.
Added option for disable this behaviour in the pjsip.conf.
This is a system option, but working as a gloabl option.
ASTERISK-28959
Change-Id: I9596675e52a742774738b5aad5d1fec32f477abc
Integrated STIR/SHAKEN support with outgoing INVITEs. When an INVITE is
sent, the caller ID will be checked to see if there is a certificate
that corresponds to it. If so, that information will be retrieved and an
Identity header will be added to the SIP message. The format is:
header.payload.signature;info=<public_key_url>alg=ES256;ppt=shaken
Header, payload, and signature are all BASE64 encoded. The public key
URL is retrieved from the certificate. Currently the algorithm and ppt
are ES256 and shaken, respectively. This message is signed and can be
used for verification on the receiving end.
Two new configuration options have been added to the certificate object:
attestation and origid. The attestation is required and must be A, B, or
C. origid is the origination identifier.
A new utility function has been added as well that takes a string,
allocates space, BASE64 encodes it, then returns it, eliminating the
need to calculate the size yourself.
Change-Id: I1f84d6a5839cb2ed152ef4255b380cfc2de662b4
What's wrong with ast_debug?
ast_debug is fine for general purpose debug output but it's not
really geared for scope tracing since it doesn't present its
output in a way that makes capturing and analyzing flow through
Asterisk easy.
How is scope tracing better?
Scope tracing uses the same "cleanup" attribute that RAII_VAR
uses to print messages to a separate "trace" log level. Even
better, the messages are indented and unindented based on a
thread-local call depth counter. When output to a separate log
file, the output is uncluttered and easy to follow.
Here's an example of the output. The leading timestamps and
thread ids are removed and the output cut off at 68 columns for
commit message restrictions but you get the idea.
--> res_pjsip_session.c:3680 handle_incoming PJSIP/1173-00000001
--> res_pjsip_session.c:3661 handle_incoming_response PJSIP/1173
--> res_pjsip_session.c:3669 handle_incoming_response PJSIP/
--> chan_pjsip.c:3265 chan_pjsip_incoming_response_after
--> chan_pjsip.c:3194 chan_pjsip_incoming_response P
chan_pjsip.c:3245 chan_pjsip_incoming_respon
<-- chan_pjsip.c:3194 chan_pjsip_incoming_response P
<-- chan_pjsip.c:3265 chan_pjsip_incoming_response_after
<-- res_pjsip_session.c:3669 handle_incoming_response PJSIP/
<-- res_pjsip_session.c:3661 handle_incoming_response PJSIP/1173
<-- res_pjsip_session.c:3680 handle_incoming PJSIP/1173-00000001
The messages with the "-->" or "<--" were produced by including
the following at the top of each function:
SCOPE_TRACE(1, "%s\n", ast_sip_session_get_name(session));
Scope isn't limited to functions any more than RAII_VAR is. You
can also see entry and exit from "if", "for", "while", etc blocks.
There is also an ast_trace() macro that doesn't track entry or
exit but simply outputs a message to the trace log using the
current indent level. The deepest message in the sample
(chan_pjsip.c:3245) was used to indicate which "case" in a
"select" was executed.
How do you use it?
More documentation is available in logger.h but here's an overview:
* Configure with --enable-dev-mode. Like debug, scope tracing
is #ifdef'd out if devmode isn't enabled.
* Add a SCOPE_TRACE() call to the top of your function.
* Set a logger channel in logger.conf to output the "trace" level.
* Use the CLI (or cli.conf) to set a trace level similar to setting
debug level... CLI> core set trace 2 res_pjsip.so
Summary Of Changes:
* Added LOG_TRACE logger level. Actually it occupies the slot
formerly occupied by the now defunct "event" level.
* Added core asterisk option "trace" similar to debug. Includes
ability to specify global trace level in asterisk.conf and CLI
commands to turn on/off and set levels. Levels can be set
globally (probably not a good idea), or by module/source file.
* Updated sample asterisk.conf and logger.conf. Tracing is
disabled by default in both.
* Added __ast_trace() to logger.c which keeps track of the indent
level using TLS. It's #ifdef'd out if devmode isn't enabled.
* Added ast_trace() and SCOPE_TRACE() macros to logger.h.
These are all #ifdef'd out if devmode isn't enabled.
Why not use gcc's -finstrument-functions capability?
gcc's facility doesn't allow access to local data and doesn't
operate on non-function scopes.
Known Issues:
The only know issue is that we currently don't know the line
number where the scope exited. It's reported as the same place
the scope was entered. There's probably a way to get around it
but it might involve looking at the stack and doing an 'addr2line'
to get the line number. Kind of like ast_backtrace() does.
Not sure if it's worth it.
Change-Id: Ic5ebb859883f9c10a08c5630802de33500cad027
Adds the "STIR_SHAKEN" dialplan function and an API call to add a
STIR_SHAKEN verification result to a channel. This information will be
held in a datastore on the channel that can later be queried through the
"STIR_SHAKEN" dialplan funtion to get information on STIR_SHAKEN results
including identity, attestation, and verify_result. Here are some
examples:
STIR_SHAKEN(count)
STIR_SHAKEN(0, identity)
STIR_SHAKEN(1, attestation)
STIR_SHAKEN(2, verify_result)
Getting the count can be used to iterate through the results and pull
information by specifying the index and the field you want to retrieve.
Change-Id: Ice6d52a3a7d6e4607c9c35b28a1f7c25f5284a82
When in a conference bridge it may be necessary to have
text messages disabled for specific participants or for
all. This change adds a configuration option, "text_messaging",
which can be used to enable or disable this on the
user profile. By default existing behavior is preserved
as it defaults to "yes".
ASTERISK-28841
Change-Id: I30b5d9ae6f4803881d1ed9300590d405e392bc13
Based on this new endpoint setting, a joint list of preferred codecs
between those received from the Asterisk core (remote), and those
specified in the endpoint's "allow" parameter (local) is created and
is used to create the outgoing SDP offer.
* Add outgoing_call_offer_pref to pjsip_configuration (endpoint)
* Add "call_direction" to res_pjsip_session.
* Update pjsip_session_caps.c to make the functions more generic
so they could be used for both incoming and outgoing.
* Update ast_sip_session_create_outgoing to create the
pending_media_state->topology with the results of
ast_sip_session_create_joint_call_stream().
* The endpoint "preferred_codec_only" option now automatically sets
AST_SIP_CALL_CODEC_PREF_FIRST in incoming_call_offer_pref.
* A helper function ast_stream_get_format_count() was added to
streams to return the current count of formats.
ASTERISK-28777
Change-Id: Id4ec0b4a906c2ae5885bf947f101c59059935437
A pure blacklist is not good enough, we need a whitelist mechanism as
well, and the simplest way to do that is to re-use existing ACL
infrastructure.
This makes it simpler to blacklist say an entire block (/24) except a
smaller block (eg, a /29 or even a /32). Normally you'd need to
recursively split the block, so if you want to blacklist a /24 except
for a /29 you'd end up with a blacklit for a /25, /26, /27 and /28. I
feel that having an ACL instead of a blacklist only is clearer.
Change-Id: Id57a8df51fcfd3bd85ea67c489c85c6c3ecd7b30
Signed-off-by: Jaco Kroon <jaco@uls.co.za>
Add a new option, incoming_call_offer_pref, to res_pjsip endpoints that
specifies the preferred order of codecs after receiving an offer.
This patch does the following:
Adds a new enumeration, ast_sip_call_codec_pref, used by the the new
configuration option that's added to the endpoint media structure.
Adds a new ast_sip_session_caps structure that's set for each session media
object.
Creates a new file, res_pjsip_session_caps that "implements" the new
structure and option, and is compiled into the res_pjsip_session library.
ASTERISK-28756 #close
Change-Id: I35e7a2a0c236cfb6bd9cdf89539f57a1ffefc76f
In order to reduce the amount of AMI and ARI events generated,
the global "Message/ast_msg_queue" channel can be set to suppress
it's normal channel housekeeping events such as "Newexten",
"VarSet", etc. This can greatly reduce load on the manager
and ARI applications when the Digium Phone Module for Asterisk
is in use. To enable, set "hide_messaging_ami_events" in
asterisk.conf to "yes" In Asterisk versions <18, the default
is "no" preserving existing behavior. Beginning with
Asterisk 18, the option will default to "yes".
NOTE: This change does not affect UserEvents or the ARI
TextMessageReceived events.
* Added the "hide_messaging_ami_events" option to asterisk.conf.
* Changed message.c to set the AST_CHAN_TP_INTERNAL property on
the "Message/ast_msg_queue" channel if the option is set in
asterisk.conf. This suppresses the reporting of the events.
Change-Id: Ia2e3516d43f4e0df994fc6598565d6bba2d7018b
It said "restrict [...] which peers should be able to pass [audio]
to each other".
However, these settings are not global (for which you would expect
signaling IPs to be checked). These settings are available per peer
only, and the IPs being checked, are the RTP IPs.
Change-Id: I2a6c6cd7c2f5f30d1df4844e3e0308a077021660
Add a new configuration option 'enable_status' which allows the
/httpstatus URI handler to be administratively disabled.
We also no longer unconditionally register the /static and /httpstatus
URI handlers, but instead do it based upon configuration.
Behavior change: If enable_static was turned off, the URI handler was
still installed but returned a 403 when it was accessed. Because we
now register/unregister the URI handlers as appropriate, if the
/static URI is disabled we will return a 404 instead.
Additionally:
* Change 'enablestatic' to 'enable_static' but keep the former for
backwards compatibility.
* Improve some internal variable names
ASTERISK-28710 #close
Change-Id: I647510f796473793b1d3ce1beb32659813be69e1
Adds source port matching support when IP matching is used:
[example]
type = identify
match = 1.2.3.4:5060/32, 1.2.3.4:6000/32, asterisk.org:4444
If the IP matches but the source port does not, we reject and search for
alternatives. SRV lookups are still performed if enabled (srv_lookups = yes),
unless the configured FQDN includes a port number in which case just a host
lookup is performed.
ASTERISK-28639 #close
Reported by: Mitch Claborn
Change-Id: I256d5bd5d478b95f526e2f80ace31b690eebba92
ConfBridge has the ability to move between different sample
rates for mixing the conference bridge. Up until now there has
only been the ability to set the conference bridge to mix at
a specific sample rate, or to let it move between sample rates
as necessary. This change adds the ability to configure a
conference bridge with a maximum sample rate so it can move
between sample rates but only up to the configured maximum.
ASTERISK-28658
Change-Id: Idff80896ccfb8a58a816e4ce9ac4ebde785963ee
Allow the list of files to be played to be provided explicitly in the
music class's configuration. The primary driver for this change is to
allow URLs to be used for MoH.
Change-Id: I9f43b80b43880980b18b2bee26ec09429d0b92fa
Changes made to apps/Makefile to optionally build all three app_voicemail
variations at the same time: 1) file (default), 2) odbc, and 3) imap.
This functionality was requested by users. modules.conf.sample warns the
user to make sure only one voicemail is loaded at a time.
Change-Id: Iba3cd8ffb4b7e8b1c64a11dd383e1eafcd3ed0e7
This change adds support for larger TLS certificates by allowing
OpenSSL to fragment the DTLS packets according to the configured
MTU. By default this is set to 1200.
This is accomplished by implementing our own BIO method that
supports MTU querying. The configured MTU is returned to OpenSSL
which fragments the packet accordingly. When a packet is to be
sent it is done directly out the RTP instance.
ASTERISK-28018
Change-Id: If2d5032019a28ffd48f43e9e93ed71dbdbf39c06
This patch adds basic Asterisk channel statistics to the res_prometheus
module. This includes:
* asterisk_calls_sum: A running sum of the total number of
processed calls
* asterisk_calls_count: The current number of calls
* asterisk_channels_count: The current number of channels
* asterisk_channels_state: The state of any particular channel
* asterisk_channels_duration_seconds: How long a channel has existed,
in seconds
In all cases, enough information is provided with each channel metric
to determine a unique instance of Asterisk that provided the data, as
well as the name, type, unique ID, and - if present - linked ID of each
channel.
ASTERISK-28403
Change-Id: I0db306ec94205d4f58d1e7fbabfe04b185869f59
Prometheus is the defacto monitoring tool for containerized applications.
This patch adds native support to Asterisk for serving up Prometheus
compatible metrics, such that a Prometheus server can scrape an Asterisk
instance in the same fashion as it does other HTTP services.
The core module in this patch provides an API that future work can build
on top of. The API manages metrics in one of two ways:
(1) Registered metrics. In this particular case, the API assumes that
the metric (either allocated on the stack or on the heap) will have
its value updated by the module registering it at will, and not
just when Prometheus scrapes Asterisk. When a scrape does occur,
the metrics are locked so that the current value can be retrieved.
(2) Scrape callbacks. In this case, the API allows consumers to be
called via a callback function when a Prometheus initiated scrape
occurs. The consumers of the API are responsible for populating
the response to Prometheus themselves, typically using stack
allocated metrics that are then formatted properly into strings
via this module's convenience functions.
These two mechanisms balance the different ways in which information is
generated within Asterisk: some information is generated in a fashion
that makes it appropriate to update the relevant metrics immediately;
some information is better to defer until a Prometheus server asks for
it.
Note that some care has been taken in how metrics are defined to
minimize the impact on performance. Prometheus's metric definition
and its support for nesting metrics based on labels - which are
effectively key/value pairs - can make storage and managing of metrics
somewhat tricky. While a naive approach, where we allow for any number
of labels and perform a lot of heap allocations to manage the information,
would absolutely have worked, this patch instead opts to try to place
as much information in length limited arrays, stack allocations, and
vectors to minimize the performance impacts of scrapes. The author of
this patch has worked on enough systems that were driven to their knees
by poor monitoring implementations to be a bit cautious.
Additionally, this patch only adds support for gauges and counters.
Additional work to add summaries, histograms, and other Prometheus
metric types may add value in the future. This would be of particular
interest if someone wanted to track SIP response types.
Finally, this patch includes unit tests for the core APIs.
ASTERISK-28403
Change-Id: I891433a272c92fd11c705a2c36d65479a415ec42
You can now add the "include_local_address" flag to an entry in
rtp.conf "[ice_host_candidates]" to include both the advertized
address and the local address in ICE negotiation:
[ice_host_candidates]
192.168.1.1 = 1.2.3.4,include_local_address
This causes both 192.168.1.1 and 1.2.3.4 to be advertized.
Change-Id: Ide492cd45ce84546175ca7d557de80d9770513db
When producing a combined REMB value the normal behavior
is to have a REMB value which is unique for each sender
based on all of their receivers. This can result in one
sender having low bitrate while all the rest are high.
This change adds "all" variants which produces a bridge
level REMB value instead. All REMB reports are combined
together into a single REMB value that is the same for
each sender.
ASTERISK-28401
Change-Id: I883e6cc26003b497c8180b346111c79a131ba88c
There a long history here:
In commit dd1e62c095 has introduce by default shared_lastcall = true by
default but this now only happen is there not [general] directive in
queues.conf
After that, the commit 4b50e3f1ee fix the
sample file.
We'll need to keep the same setting if there a general or not section in
configuration file since the shared_lastcall is by a long time in
sample files as default value to 'no'.
Change-Id: Id44faec370136df8d57902b453ad4059ed21b94c
Added a new PJSIP global setting called norefersub.
Default is true to keep support working as before.
res_pjsip_refer: Configures PJSIP norefersub capability accordingly.
Checks the PJSIP global setting value.
If it is true (default) it adds the norefersub capability to PJSIP.
If it is false (disabled) it does not add the norefersub capability
to PJSIP.
This is useful for Cisco switches that do not follow RFC4488.
ASTERISK-28375 #close
Reported-by: Dan Cropp
Change-Id: I0b1c28ebc905d881f4a16e752715487a688b30e9
chan_sip will always ignore 183 responses that do not contain SDP
however, chan_pjsip will currently always translate it into a
183 with SDP. This new flag allows chan_pjsip to have the same
behavior as chan_sip.
ASTERISK-28322 #close
Change-Id: If81cfaa17c11b6ac703e3d71696f259d86c6be4a
The res_pjsip_websocket module requires the res_http_websocket
module so ensure it is loaded. As well the res_pjsip_notify
module needs the pjsip_notify.conf configuration file so
ensure it is installed.
ASTERISK-28272
Change-Id: I261659b84e7a6ac4cb49990d9badb4b2ad01bacd
To prevent one subsystem's taskprocessors from causing others
to stall, new capabilities have been added to taskprocessors.
* Any taskprocessor name that has a '/' will have the part
before the '/' saved as its "subsystem".
Examples:
"sorcery/acl-0000006a" and "sorcery/aor-00000019"
will be grouped to subsystem "sorcery".
"pjsip/distributor-00000025" and "pjsip/distributor-00000026"
will bn grouped to subsystem "pjsip".
Taskprocessors with no '/' have an empty subsystem.
* When a taskprocessor enters high-water alert status and it
has a non-empty subsystem, the subsystem alert count will
be incremented.
* When a taskprocessor leaves high-water alert status and it
has a non-empty subsystem, the subsystem alert count will be
decremented.
* A new api ast_taskprocessor_get_subsystem_alert() has been
added that returns the number of taskprocessors in alert for
the subsystem.
* A new CLI command "core show taskprocessor alerted subsystems"
has been added.
* A new unit test was addded.
REMINDER: The taskprocessor code itself doesn't take any action
based on high-water alerts or overloading. It's up to taskprocessor
users to check and take action themselves. Currently only the pjsip
distributor does this.
* A new pjsip/global option "taskprocessor_overload_trigger"
has been added that allows the user to select the trigger
mechanism the distributor uses to pause accepting new requests.
"none": Don't pause on any overload condition.
"global": Pause on ANY taskprocessor overload (the default and
current behavior)
"pjsip_only": Pause only on pjsip taskprocessor overloads.
* The core pjsip pool was renamed from "SIP" to "pjsip" so it can
be properly grouped into the "pjsip" subsystem.
* stasis taskprocessor names were changed to "stasis" as the
subsystem.
* Sorcery core taskprocessor names were changed to "sorcery" to
match the object taskprocessors.
Change-Id: I8c19068bb2fc26610a9f0b8624bdf577a04fcd56
When Asterisk is connected and used with a database the response
time of the database can cause problems in Asterisk if it is long.
Normally the only way to see this problem would be to retrieve a
backtrace from Asterisk and examine where things are blocked, or
examine the database to see if there is any indication of a
problem.
This change adds some basic query logging to make it easier to
investigate such a problem. When logging is enabled res_odbc will
now keep track of the number of queries executed, as well as the
query that has taken the longest time to execute. There is also
an option which will cause a WARNING message to be output if a
query takes longer than a configurable amount of time to execute.
This makes it easier and clearer for users that their database may
be experiencing a problem that could impact Asterisk.
ASTERISK-28277
Change-Id: I173cf4928b10754478a6a8c27dfa96ede0f058a6
The option value "sdp" for some of the settings was removed a while back,
however the sample conf was not updated.
This patch removes any wording with regards to the old "sdp" option value,
and adjusts the defaults to what they are now.
ASTERISK-28263
Change-Id: I41bfa44e9f69446bcc5c8fd92e3675c676fdc445
You can now define an "aliases" context in voicemail.conf
whose entries point to actual mailboxes. These can be used anywhere
the mailbox is specified.
Example:
[general]
aliasescontext = myaliases
[default]
1234 = yadayada
[myaliases]
4321@devices = 1234@default
Now you can use 4321@devices to refer to the 1234@default mailbox.
This can be useful to provide channel drivers with constant
mailbox specifications such as <extension>@devices leaving
app_voicemail to control exactly which mailbox the alias points to.
Now, only voicemail has to be reloaded to make changes instead of
individual channel drivers which are usually more expensive to
reload.
Change-Id: I395b9205c91523a334fe971be0d1de4522067b04
The commit I2f97ebfa79969a36a97bb7b9afd5b6268cf1a07d removed sending out
the ContactStatus AMI event when a contact is updated.
Thist change broke things which rely on old behavior.
This patch adds a new PJSIP global configuration option
'send_contact_status_on_update_registration' to be able to preserve old
ContactStatus behavior.
By default new behavior, i.e. the ContactStatus event will not be sent when a
device refreshes its registration.
Change-Id: I706adf7584e7077eb6bde6d9799ca408bc82ce46
This reverts commit 29115e2384.
That commit closed a long standing hole which allowed subscriptions
to mailboxes that weren't configured in voicemail.conf. This
caused an issue with FreePBX which depdended on that behavior.
The commit is being reverted until FreePBX can handle the new
behavior.
ASTERISK-28151
Reported by: Ronald Raikes
Change-Id: I57b7b85e75d7dd97c742b5c69d718a0f61260c15
When a channel snapshot was created it used to be done
from scratch, copying all data (many strings). This incurs
a cost when doing so.
This change segments the channel snapshot into different
components which can be reused if unchanged from the
previous snapshot creation, reducing the cost. In normal
cases this results in some pointers being copied with
reference count being bumped, some integers being set,
and a string or two copied. The other benefit is that it
is now possible to determine if a channel snapshot update
is redundant and thus stop it before a message is published
to stasis.
The specific segments in the channel snapshot were split up
based on whether they are changed together, how often they
are changed, and their general grouping. In practice only
1 (or 0) of the segments actually get changed in normal
operation.
Invalidation is done by setting a flag on the channel when
the segment source is changed, forcing creation of a new
segment when the channel snapshot is created.
ASTERISK-28119
Change-Id: I5d7ef3df963a88ac47bc187d73c5225c315f8423
This patch adds new options 'trust_connected_line' and 'send_connected_line'
to the endpoint.
The option 'trust_connected_line' is to control if connected line updates
are accepted from this endpoint.
The option 'send_connected_line' is to control if connected line updates
can be sent to this endpoint.
The default value is 'yes' for both options.
Change-Id: I16af967815efd904597ec2f033337e4333d097cd
This officially deprecates chan_sip in Asterisk 17+. A warning is
printed upon startup or module load to tell users that they should
consider migrating. chan_sip is still built by default but the default
modules.conf skips loading it at startup.
Very important to note we are not scheduling a time where chan_sip will
be removed. The goal of this change is to accurately inform end users
of the current state of chan_sip and encourage movement to the fully
supported chan_pjsip.
Change-Id: Icebd8848f63feab94ef882d36b2e99d73155af93
This change implements a few different generic things which were brought
on by Google Voice SIP.
1. The concept of flow transports have been introduced. These are
configurable transports in pjsip.conf which can be used to reference a
flow of signaling to a target. These have runtime configuration that can
be changed by the signaling itself (such as Service-Routes and
P-Preferred-Identity). When used these guarantee an individual connection
(in the case of TCP or TLS) even if multiple flow transports exist to the
same target.
2. Service-Routes (RFC 3608) support has been added to the outbound
registration module which when received will be stored on the flow
transport and used for requests referencing it.
3. P-Associated-URI / P-Preferred-Identity (RFC 3325) support has been
added to the outbound registration module. If a P-Associated-URI header
is received it will be used on requests as the P-Preferred-Identity.
4. Configurable outbound extension support has been added to the outbound
registration module. When set the extension will be placed in the
Supported header.
5. Header parameters can now be configured on an outbound registration
which will be placed in the Contact header.
6. Google specific OAuth / Bearer token authentication
(draft-ietf-sipcore-sip-authn-02) has been added to the outbound
registration module.
All functionality changes are controlled by pjsip.conf configuration
options and do not affect non-configured pjsip endpoints otherwise.
ASTERISK-27971 #close
Change-Id: Id214c2d1c550a41fcf564b7df8f3da7be565bd58
When networks experience disruptions, there can be large gaps of time
between receiving packets. When strictrtp is enabled, this created
issues where a flood of packets could come in and be seen as an attack.
Another option - seqno - has been added to the strictrtp option that
ignores the time interval and goes strictly by sequence number for
validity.
Change-Id: I8a42b8d193673899c8fc22fe7f98ea87df89be71
app_voicemail was using the stasis cache to build and maintain a
list of mailboxes that had subscribers. It then used this list
to determine if a mailbox should be polled for new messages if
polling was enabled. For this to work, stasis had to cache every
subscription and unsubscription to the mailbox which caused a lot of
overhead, both cpu and memory related.
Since polling is only required when changes are being made to
mailboxes outside of app_voicemail and since the number of mailboxes
that don't have any subscribers is likely to be very low, all
mailboxes are now polled instead of just the ones with subscribers.
This paves the way for disabling the caching of stasis subscription
change messages.
Also fixed cleanup in some of the unit tests that not only left
test users in the users list but also caused segfaults if the tests
were run more than once.
ASTERISK-27121
Change-Id: I5cceb737246949f9782955c64425b8bd25a9e9ee
Change disables loading of res_hep.so in default installation. Loading
res_hep has a performance impact whether it's used or not. This disables
loading of it in sample config files.
Change-Id: I5ec150cf941634fabc72973e5bf1a965cb0ef9d0
It is valid for a config file to be empty or contain only comments, but
not valid for a config value to be set when no uncommented context
exists. This caused an error to be loged numerous times during start
when loading the default pjsip.conf.
Change-Id: Icf3b0d69b4ecb6e935eecd43c99ed8b32a5a1cf6
A new option 'suppress_q850_reason_headers' has been added to the
endpoint object. Some devices can't accept multiple Reason headers and
get confused when both 'SIP' and 'Q.850' Reason headers are received.
This option allows the 'Q.850' Reason header to be suppressed.
The default value is 'no'.
ASTERISK-27949
Reported-by: Ross Beer
Change-Id: I54cf37a827d77de2079256bb3de7e90fa5e1deb1
The Websocket transport uses the built-in HTTP server. As a result
the TLS configuration is done in http.conf and not in pjsip.conf.
This change adds a warning if this is configured in pjsip.conf and
also clarifies in the sample configuration file.
Change-Id: I187d994d328c3ed274b6754fd4c2a4955bdc6dd9
pjproject by default currently will follow media forked during an INVITE
on outbound calls if the To tag is different on a subsequent response as
that on an earlier response. We handle this correctly. There have
been reported cases where the To tag is the same but we still need to
follow the media. The pjproject patch in this commit adds the
capability to sip_inv and also adds the capability to control it at
runtime. The original "different tag" behavior was always controllable
at runtime but we never did anything with it and left it to default to
TRUE.
So, along with the pjproject patch, this commit adds options to both the
system and endpoint objects to control the two behaviors, and a small
logic change to session_inv_on_media_update in res_pjsip_session to
control the behavior at the endpoint level.
The default behavior for "different tags" remains the same at TRUE and
the default for "same tag" is FALSE.
Change-Id: I64d071942b79adb2f0a4e13137389b19404fe3d6
ASTERISK-27936
Reported-by: Ross Beer
ConfBridge can now send events to participants via in-dialog MESSAGEs.
All current Confbridge events are supported, such as ConfbridgeJoin,
ConfbridgeLeave, etc. In addition to those events, a new event
ConfbridgeWelcome has been added that will send a list of all
current participants to a new participant.
For all but the ConfbridgeWelcome event, the JSON message contains
information about the bridge, such as its id and name, and information
about the channel that triggered the event such as channel name,
callerid info, mute status, and the MSID labels for their audio and
video tracks. You can use the labels to correlate callerid and mute
status to specific video elements in a webrtc client.
To control this behavior, the following options have been added to
confbridge.conf:
bridge_profile/enable_events: This must be enabled on any bridge where
events are desired.
user_profile/send_events: This must be set for a user profile to send
events. Different user profiles connected to the same bridge can have
different settings. This allows admins to get events but not normal
users for instance.
user_profile/echo_events: In some cases, you might not want the user
triggering the event to get the event sent back to them. To prevent it,
set this to false.
A change was also made to res_pjsip_sdp_rtp to save the generated msid
to the stream so it can be re-used. This allows participant A's video
stream to appear as the same label to all other participants.
Change-Id: I26420aa9f101f0b2387dc9e2fd10733197f1318e
The OUTPUTDIR variable in ast_debug_tools.conf.sample is now set
to "/tmp" instead of "/some/directory".
Variables set on the command line or that are already in the
environment now take predecence over variables set in the config files.
ASTERISK-27846
Reported by: Ted G
Change-Id: Ie8baec52d531886bf5849ec1d59bb59dc87ad387
Analog phones dial overlap dialing and it is chan_dahdi's job to read the
numbers. It has three timeout constants that this commit converts to
channel-level configuration options:
* firstdigit_timeout: Default time (ms) to detect first digit
* interdigit_timeout: Default time (ms) to detect following digits
* matchdigit_timeout: Default time (ms) to wait in case of ambiguous
match. This happens when the dialed digits match a number in the current
context but are also the prefix of another number.
Change-Id: Ib728fa900a4f6ae56d1ed810aba61b6593fb7213
This change adds the ability for multiple REMB reports in
bridge_softmix to be combined according to a configured
behavior into a single report. This single report is sent
back to the sender of video, which adjusts the encoding bitrate
to be at or below the bitrate of the report. The available
behaviors are: lowest, highest, and average. Lowest uses the
lowest received bitrate. Highest uses the highest received
bitrate. Average goes through the received bitrates adding
them to the previous average and creates a new average.
Other behaviors can be added in the future and the existing
average one may be adjusted, but this provides the foundation
to do so.
Support for configuring which behavior to use has been
added to app_confbridge.
ASTERISK-27804
Change-Id: I9eafe4e7c1f72d67074a8d6acb26bfcf19322b66
This change adds a configuration option to app_confbridge which can be
used to set the interval at which we will send a combined REMB (remote
estimated maximum bitrate) frame to sources of video. The bridging API
has also been extended slightly to allow setting this so bridge_softmix
can use it.
ASTERISK-27786
Change-Id: I0e49eae60f369c86434414f3cb8278709c793c82
If the two formats on a channel are equal, we don't transcode and since
the generic plc needs slin to work, it doesn't get invoked.
* A new configuration option "genericplc_on_equal_codecs" was added
to the "plc" section of codecs.conf to allow generic packet loss
concealment even if no transcoding was originally needed.
Transcoding via SLIN is forced in this case.
ASTERISK-27743
Change-Id: I0577026a179dea34232e63123254b4e0508378f4
The pool cache gets in the way of finding use after free errors of memory
pool contents. Tools like valgrind and MALLOC_DEBUG don't know when a
pool is released because it gets put into the cache instead of being
freed.
* Added the "cache_pools" option to pjproject.conf. Disabling the option
helps track down pool content mismanagement when using valgrind or
MALLOC_DEBUG. The cache gets in the way of determining if the pool
contents are used after free and who freed it.
To disable the pool caching simply disable the cache_pools option in
pjproject.conf and restart Asterisk.
Sample pjproject.conf setting:
[startup]
cache_pools=no
* Made current users of the caching pool factory initialization and
destruction calls call common routines to create and destroy cached pools.
ASTERISK-27704
Change-Id: I64d5befbaeed2532f93aa027a51eb52347d2b828
When a line is the maximum length "\n" is found at sizeof(buf) - 2 since
the last character is actually the null terminator. In addition if a
line was exactly 8190 plus a multiple of 8192 characters long the config
parser would skip the following line.
Additionally fix comment in voicemail.conf sample config. It previously
stated that emailbody can only contain up to 512 characters which is
always wrong. The buffer is normally 8192 characters unless LOW_MEMORY
is enabled then it is 512 characters. The updated comment states that
the line can be up to 8190 or 510 characters since the line feed and
NULL terminator each use a character.
ASTERISK-26688 #close
Change-Id: I80864a0d40d2e2d8cd79d72af52a8f0a3a99c015
The dsp_talking_threshold does not represent time in milliseconds. It
represents the average magnitude per sample in the audio packets. This is
what the DSP uses to determine if a packet is silence or talking/noise.
Change-Id: If6f939c100eb92a5ac6c21236559018eeaf58443
The sample modules.conf explicitly loaded res_musiconhold.so. This is
redundent as autoload=yes is already set. It causes warnings if
res_musiconhold.so was not installed and results in an unexpected load
if the admin disables autoload without remembering to remove the
res_musiconhold load statement.
Also remove reference to unknown module pbx_gtkconsole.
Change-Id: Ib01888994d9f1364b14d3c9fb6ff96774a6e580a
This patch adds the ability to configure a prompt which will be read
to the "winner" who pressed 1 (or the configured value) and received
the call.
ASTERISK-24372 #close
Change-Id: I6ec1c6c883347f7d1e1f597189544993c8d65272
The type=identify endpoint identification method can match by IP address
and by SIP header. However, the SIP header matching has limited
usefulness because you cannot specify the SIP header matching priority
relative to the IP address matching. All the matching happens at the same
priority and the order of evaluating the identify sections is
indeterminate. e.g., If you had two type=identify sections where one
matches by IP address for endpoint alice and the other matches by SIP
header for endpoint bob then you couldn't predict which endpoint is
matched when a request comes in that matches both.
* Extract the SIP header matching criteria into its own "header" endpoint
identification method so the user can specify the relative priority of the
SIP header and the IP address matching criteria in the global
endpoint_identifier_order option. The "ip" endpoint identification method
now only matches by IP address.
ASTERISK-27491
Change-Id: I9df142a575b7e1e3471b7cda5d3ea156cef08095
This patch adds the ability to set the wrapuptime on the queue member
config.
When the option is set the wrapuptime on the queue member is used instead
of the queue's wrapuptime.
ASTERISK-27483 #close
Change-Id: I11c85809537f974eb44dc5bbf82bcedd8a458902
The mute/unmute sounds are only played when the
action is initiated using the DTMF menu.
ASTERISK-24756
Change-Id: I55b3dd5bc166096bf5e2f547ddd0ce355f36e3dc
Sam Banks
George Joseph
Naveen Albert
Kevin Harwell
Michael Cargile
Mark Petersen
Joshua C. Colp
Ben Ford
Alexei Gradinari
Sean Bright
Josh Soref
Matthew Kern
Joseph Nadiv
Sebastien Duthil
Sarah Autumn
Rijnhard Hessel
Naveen Albert
Jeremy Lainé
Jaco Kroon
Alexander Traud
lvl
Dovid Bender
Andrew Siplas
Walter Doekes
sungtae kim
Jared Smith
Kevin Harwell
Jonathan Rose
Chris-Savinovich
Joshua Colp
Kirsty Tyerman
Friendly Automation
Matt Jordan
Rodrigo Ramírez Norambuena
Dan Cropp
Torrey Searle
David M. Lee
Corey Farrell
Richard Mudgett
Nick French
Matthew Fredrickson
Tzafrir Cohen
ghjm