Internally, chan_dahdi only applies callgroup and
pickupgroup to FXO signalled channels, but this is
not documented anywhere. This is now documented in
the sample config, and a warning is emitted if a
user tries configuring these settings for channel
types that do not support these settings, since they
will not have any effect.
Resolves: #294
To better co-exist with sounds files that may be managed by
packages, custom sound files may now be placed in
AST_DATA_DIR/sounds/custom instead of the standard
AST_DATA_DIR/sounds/<lang> directory. If the new
"sounds_search_custom_dir" option in asterisk.conf is set
to "true", asterisk will search the custom directory for sounds
files before searching the standard directory. For performance
reasons, the "sounds_search_custom_dir" defaults to "false".
Resolves: #315
UserNote: A new option "sounds_search_custom_dir" has been added to
asterisk.conf that allows asterisk to search
AST_DATA_DIR/sounds/custom for sounds files before searching the
standard AST_DATA_DIR/sounds/<lang> directory.
This newly introduced periodic-announce-startdelay makes it possible to
configure the initial start delay of the first periodic announcement
after which periodic-announce-frequency takes over.
UserNote: Introduce a new queue configuration option called
'periodic-announce-startdelay' which will vary the normal (historic)
behavior of starting the periodic announcement cycle at
periodic-announce-frequency seconds after entering the queue to start
the periodic announcement cycle at period-announce-startdelay seconds
after joining the queue. The default behavior if this config option is
not set remains unchanged.
Signed-off-by: Jaco Kroon <jaco@uls.co.za>
This adds support for Called Subscriber Held for FXS
lines, which allows users to go on hook when receiving
a call and resume the call later from another phone on
the same line, without disconnecting the call. This is
a convenience mechanism that most real PSTN telephone
switches support.
ASTERISK-30372 #close
Resolves: #240
UserNote: Called Subscriber Held is now supported for analog
FXS channels, using the calledsubscriberheld option. This allows
a station user to go on hook when receiving an incoming call
and resume from another phone on the same line by going on hook,
without disconnecting the call.
Added a new boolean configuration flag -
`order_multi_row_results_by_initial_column` - to both res_pgsql.conf
and res_config_odbc.conf that allows the administrator to disable the
explicit `ORDER BY` that was previously being added to all generated
SQL statements that returned multiple rows.
Fixes: #179
Currently, if an FXS channel is still off hook when
all calls on the line have hung up, the user is provided
reorder tone until going back on hook again.
In addition to not reflecting what most commercial switches
actually do, it's very common for switches to automatically
reoriginate for the user so that dial tone is provided without
the user having to depress and release the hookswitch manually.
This can increase convenience for users.
This behavior is now supported for kewlstart FXS channels.
It's supported only for kewlstart (FXOKS) mainly because the
behavior doesn't make any sense for ground start channels,
and loop start signalling doesn't provide the necessary DAHDI
event that makes this easy to implement. Likely almost everyone
is using FXOKS over FXOLS anyways since FXOLS is pretty useless
these days.
ASTERISK-30357 #close
Resolves: #224
UserNote: The autoreoriginate setting now allows for kewlstart FXS
channels to automatically reoriginate and provide dial tone to the
user again after all calls on the line have cleared. This saves users
from having to manually hang up and pick up the receiver again before
making another call.
sig_analog allows users to flash and use the three-way dial
tone as a primitive hold function, simply by never timing
it out.
Some systems allow this dial tone to time out to silence,
so the user is not annoyed by a persistent dial tone.
This option allows the dial tone to time out normally to
silence.
ASTERISK-30004 #close
Resolves: #205
UserNote: The threewaysilenthold option now allows the three-way
dial tone to time out to silence, rather than continuing forever.
c3ff4648 removed the [iaxtel700] context but neglected to remove
references to it.
This commit addresses that and also removes iaxtel and freeworlddialup
references from other config files.
This deprecates the users.conf config file, which
is no longer as widely supported but still integrated
with a number of different modules.
Because there is no real mechanism for marking a
configuration file as "deprecated", and users.conf
is not just used in a single place, this now emits
a warning to the user when the PBX loads to notify
about the deprecation.
This configuration mechanism has been widely criticized
and discouraged since its inception, and is no longer
relevant to the configuration that most users are doing
today. Removing it will allow for some simplification
and cleanup in the codebase.
Resolves: #183
UpgradeNote: The users.conf config is now deprecated
and will be removed in a future version of Asterisk.
When immediate=yes on an FXS channel, sig_analog will
start fake audible ringback that continues until the
channel is answered. Even if it answers immediately,
the ringback is still audible for a brief moment.
This can be disruptive and unwanted behavior.
This adds an option to disable this behavior, though
the default behavior remains unchanged.
ASTERISK-30003 #close
Resolves: #118
UserNote: The immediatering option can now be set to no to suppress
the fake audible ringback provided when immediate=yes on FXS channels.
This adds an option 'force_longest_waiting_caller' which changes the
global behavior of the queue engine to prevent queue callers from
'jumping ahead' when an agent is in multiple queues.
Resolves: #108
Also closes old asterisk issues:
- ASTERISK-17732
- ASTERISK-17570
Change-Id: I0f84e27903fefbe2018d0afa2d67b23aa0b321ce
Adds the loop_last option to res_musiconhold,
which allows the last audio file in the directory
to be looped perpetually once reached, rather than
circling back to the beginning again.
Resolves: #122
ASTERISK-30462
UserNote: The loop_last option in musiconhold.conf now
allows the last file in the directory to be looped once reached.
A previous change, ASTERISK_29991, made it possible
to send additional Caller ID parameters that were
not previously supported.
This change adds support for analog DAHDI channels
to now be able to receive these parameters for
on-hook Caller ID, in order to enhance the usability
of CPE that support these parameters.
Resolves: #94
ASTERISK-30331
UserNote: Additional Caller ID properties are now supported on
incoming calls to FXS stations, namely the
redirecting reason and call qualifier.
* Remove .gitreview and switch to pulling the main asterisk branch
version from configure.ac instead.
* Replace references to JIRA with GitHub.
* Other minor cleanup found along the way.
Resolves: #39
Currently, both pulse and tone dialing are always enabled
on all FXS lines, with no way of disabling one or the other.
In some circumstances, it is desirable or necessary to
disable one of these, and this behavior can be problematic.
A new "dialmode" option is added which allows setting the
methods to support on a per channel basis for FXS (FXO
signalled lines). The four options are "both", "pulse",
"dtmf"/"tone", and "none".
Additionally, integration with the CHANNEL function is
added so that this setting can be updated for a channel
during a call.
Resolves: #35
ASTERISK-29992
UserNote: A "dialmode" option has been added which allows
specifying, on a per-channel basis, what methods of
subscriber dialing (pulse and/or tone) are permitted.
Additionally, this can be changed on a channel
at any point during a call using the CHANNEL
function.
Adds PJSIP as a supported technology to DUNDi.
To facilitate this, we now allow an endpoint to be specified
for outgoing PJSIP calls. We also allow users to force a specific
channel technology for outgoing SIP-protocol calls.
ASTERISK-28109 #close
ASTERISK-28233 #close
Change-Id: I2e28e5a5d007bd49e3df113ad567b011103899bf
A comment at the top of voicemail.conf says that #include
cannot be used in voicemail.conf because this breaks
the ability for app_voicemail to auto-update passwords.
This is factually incorrect, since Asterisk has no problem
updating files that are #include'd in the main configuration
file, and this does work in voicemail.conf as well.
ASTERISK-30479 #close
Change-Id: I3bf7d275849ab83f55f7fb6702a75a3077ee1df3
This newly introduced periodic-announce-startdelay makes it possible to
configure the initial start delay of the first periodic announcement
after which periodic-announce-frequency takes over.
ASTERISK-30437 #close
Change-Id: Ia79984b6377ef78f167ad9ea2ac084bec29955d0
Signed-off-by: Jaco Kroon <jaco@uls.co.za>
ASTERISK_30302 previously removed app_osplookup,
but its sample config was not removed.
This removes it since nothing else uses it.
ASTERISK-30438 #close
Change-Id: Ife234208f5f197644475db4ab1af95a8551642fd
Make the existing CURL parameters configurable and allow
to specify the usable protocols, proxy and DNS timeout.
ASTERISK-30340
Change-Id: I2eb02ef44190e026716720419bcbdbcc8125777b
Several queue fields were not being set to their default value during
a reload.
Additionally added some sample configuration options that were missing
from queues.conf.sample.
Change-Id: I3a88c7877af91752b1b46a0c087384f7eb9c47e4
Adds the overlap_context option, which can be used
to explicitly specify a context to use for overlap
dialing extension matches, rather than forcibly
using the context configured for the endpoint.
ASTERISK-30262 #close
Change-Id: Ibbcd4a8b11402428a187fb56b8d4e7408774a0db
For most modules that interacted with app_macro, this change is limited
to no longer looking for the current context from the macrocontext when
set. Additionally, the following modules are impacted:
app_dial - no longer supports M^ connected/redirecting macro
app_minivm - samples written using macro will no longer work.
The sample needs a re-write
app_queue - can no longer a macro on the called party's channel.
Use gosub which is currently supported
ccss - no callback macro, gosub only
app_voicemail - no macro support
channel - remove macrocontext and priority, no connected line or
redirection macro options
options - stdexten is deprecated to gosub as the default and only
pbx - removed macrolock
pbx_dundi - no longer look for macro
snmp - removed macro context, exten, and priority
ASTERISK-30304
Change-Id: I830daab293117179b8d61bd4df0d971a1b3d07f6
chan_sip supported sending AOC-D and AOC-E information in SIP INFO
messages in an "AOC" header in a format that was originally defined by
Snom. In the meantime, ETSI TS 124 647 introduced an XML-based AOC
format that is supported by devices from multiple vendors, including
Snom phones with firmware >= 8.4.2 (released in 2010).
This commit adds a new res_pjsip_aoc module that inserts AOC information
into outgoing messages or sends SIP INFO messages as described below.
It also fixes a small issue in res_pjsip_session which didn't always
call session supplements on outgoing_response.
* AOC-S in the 180/183/200 responses to an INVITE request
* AOC-S in SIP INFO (if a 200 response has already been sent or if the
INVITE was sent by Asterisk)
* AOC-D in SIP INFO
* AOC-D in the 200 response to a BYE request (if the client hangs up)
* AOC-D in a BYE request (if Asterisk hangs up)
* AOC-E in the 200 response to a BYE request (if the client hangs up)
* AOC-E in a BYE request (if Asterisk hangs up)
The specification defines one more, AOC-S in an INVITE request, which
is not implemented here because it is not currently possible in
Asterisk to have AOC data ready at this point in call setup. Once
specifying AOC-S via the dialplan or passing it through from another
SIP channel's INVITE is possible, that might be added.
The SIP INFO requests are sent out immediately when the AOC indication
is received. The others are inserted into an appropriate outgoing
message whenever that is ready to be sent. In the latter case, the XML
is stored in a channel variable at the time the AOC indication is
received. Depending on where the AOC indications are coming from (e.g.
PRI or AMI), it may not always be possible to guarantee that the AOC-E
is available in time for the BYE.
Successfully tested AOC-D and both variants of AOC-E with a Snom D735
running firmware 10.1.127.10. It does not appear to properly support
AOC-S however, so that could only be tested by inspecting SIP traces.
ASTERISK-21502 #close
Reported-by: Matt Jordan <mjordan@digium.com>
Change-Id: Iebb7ad0d5f88526bc6629d3a1f9f11665434d333
Adds support for the capture agent name field
of the Homer protocol to Asterisk by allowing
users to specify a name that will be sent to
the HEP server.
ASTERISK-30322 #close
Change-Id: I6136583017f9dd08daeb8be02f60fb8df4639a2b
msg_create_from_file currently does not dispatch emails,
which means that applications using this function, such
as MixMonitor, will not trigger notifications to users
(only AMI events are sent our currently). This is inconsistent
with other ways users can receive voicemail.
This is fixed by adding an option that attempts to send
an email and falling back to just the notifications as
done now if that fails. The existing behavior remains
the default.
ASTERISK-30283 #close
Change-Id: I597cbb9cf971a18d8776172b26ab187dc096a5c7
Add live_dangerously flag to manager and use this flag to
determine if a configuation file outside of AST_CONFIG_DIR
should be read.
ASTERISK-30176
Change-Id: I46b26af4047433b49ae5c8a85cb8cda806a07404
(cherry picked from commit 81f10e847e)
Currently, chan_dahdi will wait for at least one
ring before an incoming call can enter the dialplan.
This is generally necessary in order to receive
the Caller ID spill and/or distinctive ringing
detection.
However, if neither of these is required, then there
is nothing gained by waiting for one ring and this
unnecessarily delays call setup. Users can now
use immediate=yes to make FXO channels (FXS signaled)
begin processing dialplan as soon as Asterisk receives
the call.
ASTERISK-30305 #close
Change-Id: I20818b370b2e4892c7f40c8a8753fa06a81750b5
Currently chan_pjsip on receiving a re-INVITE without SDP will only
return the codecs that are previously negotiated and not offering
all enabled codecs.
This causes interoperability issues with different equipment (e.g.
from Cisco) for some of our customers and probably also in other
scenarios involving 3PCC infrastructure.
According to RFC 3261, section 14.2 we SHOULD return all codecs
on a re-INVITE without SDP
The PR proposes a new parameter to configure this behaviour:
all_codecs_on_empty_reinvite. It includes the code, documentation,
alembic migrations, CHANGES file and example configuration additions.
ASTERISK-30193 #close
Change-Id: I69763708d5039d512f391e296ee8a4d43a1e2148
Allows bridging, parking, and dial messages to be globally
ignored for all CDRs such that only a single CDR record
is generated per channel.
This is useful when CDRs should endure for the lifetime of
an entire channel and bridging and dial updates in the
dialplan should not result in multiple CDR records being
created for the call. With the ignore bridging option,
bridging changes have no impact on the channel's CDRs.
With the ignore dial state option, multiple Dials and their
outcomes have no impact on the channel's CDRs. The
last disposition on the channel is preserved in the CDR,
so the actual disposition of the call remains available.
These two options can reduce the amount of "CDR hacks" that
have hitherto been necessary to ensure that CDR was not
"spoiled" by these messages if that was undesired, such as
putting a dummy optimization-disabled local channel between
the caller and the actual call and putting the CDR on the channel
in the middle to ensure that CDR would persist for the entire
call and properly record start, answer, and end times.
Enabling these options is desirable when calls correspond
to the entire lifetime of channels and the CDR should
reflect that.
Current default behavior remains unchanged.
ASTERISK-30091 #close
Change-Id: I393981af42732ec5ac3ff9266444abb453b7c832
Also added a note to the geolocation.conf.sample file
and added a README to the res/res_geolocation/wiki
directory.
Change-Id: I89c3c5db8c0701b33127993622d5e4f904bddfbc
Adds an option that will play an audio file
to the party while AMD is running on the
channel, so the called party does not just
hear silence.
ASTERISK-30179 #close
Change-Id: I4af306274552b61b3d9f0883c33f698abd4699b6
This change adds an option, answeredonly, that will prevent music on
hold on channels that are not answered.
ASTERISK-30135
Change-Id: I1ab0defa43a29a26ae39f94c623596cf90fddc08
This change allows TEL URI requests to come through for basic calls. The
allowed requests are INVITE, ACK, BYE, and CANCEL. The From and To
headers will now allow TEL URIs, as well as the request URI.
Support is only for TEL URIs present in traffic from a remote party.
Asterisk does not generate any TEL URIs on its own.
ASTERISK-26894
Change-Id: If5729e6cd583be7acf666373bf9f1b9d653ec29a
Adds the end_marked_any option, which can be used
to kick a user from a conference if any marked user
leaves.
ASTERISK-30211 #close
Change-Id: I9e8da7ccb892e522546c0f2b5476d172e022c2f5
You can now specify the location object's format, location_info,
method, location_source and confidence parameters directly on
a profile object for simple scenarios where the location
information isn't common with any other profiles. This is
mutually exclusive with setting location_reference on the
profile.
Updated appdocsxml.dtd to allow xi:include in a configObject
element. This makes it easier to link to complete configOptions
in another object. This is used to add the above fields to the
profile object without having to maintain the option descriptions
in two places.
ASTERISK-30185
Change-Id: Ifd5f05be0a76f0a6ad49fa28d17c394027677569
Added profile parameter "suppress_empty_ca_elements" that
will cause Civic Address elements that are empty to be
suppressed from the outgoing PIDF-LO document.
Fixed a possible SEGV if a sub-parameter value didn't have a
value.
ASTERISK-30177
Change-Id: I924ccc5aa2f45110a3155b22e53dfaf3ef2092dd
The trigger to perform outgoing geolocation processing is the
presence of a geoloc_outgoing_call_profile on an endpoint. This
is intentional so as to not leak location information to
destinations that shouldn't receive it. In a totally dynamic
configuration scenario however, there may not be any profiles
defined in geolocation.conf. This makes it impossible to do
outgoing processing without defining a "dummy" profile in the
config file.
This commit adds 4 built-in profiles:
"<prefer_config>"
"<discard_config>"
"<prefer_incoming>"
"<discard_incoming>"
The profiles are empty except for having their precedence
set and can be set on an endpoint to allow processing without
entries in geolocation.conf. "<discard_config>" is actually the
best one to use in this situation.
ASTERISK-30182
Change-Id: I1819ccfa404ce59802a3a07ad1cabed60fb9480a
This change adds support using the pjsip_tls_transport_restart
function for reloading the TLS certificate and key, if the filenames
remain unchanged. This is useful for Let's Encrypt and other
situations. Note that no restart of the transport will occur if
the certificate and key remain unchanged.
ASTERISK-30186
Change-Id: I9bc95a6bf791830a9491ad9fa43c17d4010028d0
Adds additional control options over the transfer
feature functionality to give users more control
in how the transfer feature sounds and works.
First, the "transfer" sound that plays when a transfer is
initiated can now be customized by the user in
features.conf, just as with the other transfer sounds.
Secondly, the user can now specify the transfer extension
in advance by using the TRANSFER_EXTEN variable. If
a valid extension is contained in this variable, the call
will automatically be transferred to this destination.
Otherwise, it will fall back to collecting the extension
from the user as is always done now.
ASTERISK-29899 #close
Change-Id: Ibff309caa459a2b958706f2ed0ca393b1ef502e3
* Added processing for the 'confidence' element.
* Added documentation to some APIs.
* removed a lot of complex code related to the very-off-nominal
case of needing to process multiple location info sources.
* Create a new 'ast_geoloc_eprofile_to_pidf' API that just takes
one eprofile instead of a datastore of multiples.
* Plugged a huge leak in XML processing that arose from
insufficient documentation by the libxml/libxslt authors.
* Refactored stylesheets to be more efficient.
* Renamed 'profile_action' to 'profile_precedence' to better
reflect it's purpose.
* Added the config option for 'allow_routing_use' which
sets the value of the 'Geolocation-Routing' header.
* Removed the GeolocProfileCreate and GeolocProfileDelete
dialplan apps.
* Changed the GEOLOC_PROFILE dialplan function as follows:
* Removed the 'profile' argument.
* Automatically create a profile if it doesn't exist.
* Delete a profile if 'inheritable' is set to no.
* Fixed various bugs and leaks
* Updated Asterisk WiKi documentation.
ASTERISK-30167
Change-Id: If38c23f26228e96165be161c2f5e849cb8e16fa0
The CDR sample config still mentions that app_mysql
is available in the addons directory, but this is
incorrect as it was removed as of 19. This removes
that to avoid confusion.
ASTERISK-30160 #close
Change-Id: Ie5293ccb4f2b365896981811b480544e67bb9cd7
This commit adds res_pjsip_geolocation which gives chan_pjsip
the ability to use the core geolocation capabilities.
This commit message is intentionally short because this isn't
a simple capability. See the documentation at
https://wiki.asterisk.org/wiki/display/AST/Geolocation
for more information.
THE CAPABILITIES IMPLEMENTED HERE MAY CHANGE BASED ON
USER FEEDBACK!
ASTERISK-30128
Change-Id: Ie2e2bcd87243c2cfabc43eb823d4427c7086f4d9
This commit adds res_geolocation which creates the core capabilities
to manipulate Geolocation information on SIP INVITEs.
An upcoming commit will add res_pjsip_geolocation which will
allow the capabilities to be used with the pjsip channel driver.
This commit message is intentionally short because this isn't
a simple capability. See the documentation at
https://wiki.asterisk.org/wiki/display/AST/Geolocation
for more information.
THE CAPABILITIES IMPLEMENTED HERE MAY CHANGE BASED ON
USER FEEDBACK!
ASTERISK-30127
Change-Id: Ibfde963121b1ecf57fd98ee7060c4f0808416303
Rightly the use of wildcards in certificates is disallowed in accordance
with RFC5922. However, RFC2818 does make some allowances with regards to
their use when using subject alt names with DNS name types.
As such this patch creates a new setting for TLS transports called
'allow_wildcard_certs', which when it and 'verify_server' are both enabled
allows DNS name types, as well as the common name that start with '*.'
to match as a wildcard.
For instance: *.example.com
will match for: foo.example.com
Partial matching is not allowed, e.g. f*.example.com, foo.*.com, etc...
And the starting wildcard only matches for a single level.
For instance: *.example.com
will NOT match for: foo.bar.example.com
The new setting is disabled by default.
ASTERISK-30072 #close
Change-Id: If0be3fdab2e09c2a66bb54824fca406ebaac3da4
Currently, PJSIP will randomly wait up to 10 seconds for each
outbound registration's initial attempt. The reason for this
is to avoid having all outbound registrations attempt to register
simultaneously.
This can create limitations with the test suite where we need to
be able to receive inbound calls potentially within 10 seconds of
starting up. For instance, we might register to another server
and then try to receive a call through the registration, but if
the registration hasn't happened yet, this will fail, and hence
this inconsistent behavior can cause tests to fail. Ultimately,
this requires a smaller random value because there may be no good
reason to wait for up to 10 seconds in these circumstances.
To address this, a new config option is introduced which makes this
maximum delay configurable. This allows, for instance, this to be
set to a very small value in test systems to ensure that registrations
happen immediately without an unnecessary delay, and can be used more
generally to control how "tight" the initial outbound registrations
are.
ASTERISK-29965 #close
Change-Id: Iab989a8e94323e645f3a21cbb6082287c7b2f3fd
Added the hear_own_join_sound option to the confbridge user profile to
control who hears the sound_join audio file. When set to 'yes' the user
entering the conference and the participants already in the conference
will hear the sound_join audio file. When set to 'no' the user entering
the conference will not hear the sound_join audio file, but the
participants already in the conference will hear the sound_join audio
file.
ASTERISK-29931
Added by Michael Cargile
Change-Id: I856bd66dc0dfa057323860a6418c1371d249abd2
Currently, if any custom ring cadences are specified, they are
appended to the array of cadences from wherever we left off
last time. This works properly the first time, but on subsequent
dahdi restarts, it means that the existing cadences are left
alone and (most likely) the same cadences are then re-added
afterwards. In short order, the cadence array gets maxed out
and the user begins seeing warnings that the array is full
and no more cadences may be added.
This buggy behavior persists until Asterisk is completely
restarted; however, if and when dahdi restart is run again,
then the same problem is reintroduced.
This fixes this behavior so that cadence parsing is more
idempotent, that is so running dahdi restart multiple times
starts adding cadences from the beginning, rather than from
wherever the last cadence was added.
As before, it is still not possible to revert to the default
cadences by simply removing all cadences in this manner, nor
is it possible to delete existing cadences. However, this
does make it possible to update existing cadences, which
was not possible before, and also ensures that the cadences
remain unchanged if the config remains unchanged.
ASTERISK-29990 #close
Change-Id: Ie32ea3e8a243b766756b1afce684d4a31ee7421d
Removes a couple sample config files for modules
which have since been removed from Asterisk.
ASTERISK-30008 #close
Change-Id: I6be89cafc6c575d98a5315e4912b61a833aacf52
added new global config option "allow_sending_180_after_183"
that if enabled will preserve 180 after a 183
ASTERISK-29842
Change-Id: I8a53f8c35595b6d16d8e86e241b5f110d92f3d18
Add framework to connect to, and read and write protocol based
messages from and to an external application using an Asterisk
External Application Protocol (AEAP). This has been divided into
several abstractions:
1. transport - base communication layer (currently websocket only)
2. message - AEAP description and data (currently JSON only)
3. transaction - links/binds requests and responses
4. aeap - transport, message, and transaction handler/manager
This patch also adds an AEAP implementation for speech to text.
Existing speech API callbacks for speech to text have been completed
making it possible for Asterisk to connect to a configured external
translator service and provide audio for STT. Results can also be
received from the external translator, and made available as speech
results in Asterisk.
Unit tests have also been created that test the AEAP framework, and
also the speech to text implementation.
ASTERISK-29726 #close
Change-Id: Iaa4b259f84aa63501e5fd2a6fb107f900b4d4ed2
The async_operations setting on a transport configures how
many simultaneous incoming packets the transport can handle
when multiple threads are polling and waiting on the transport.
As we only use a single thread this was needlessly creating
incoming packets when set to a non-default value, wasting memory.
ASTERISK-30006
Change-Id: I1915973ef352862dc2852a6ba4cfce2ed536e68f
Adds a new configuration option, stir_shaken_profile, in pjsip.conf that
can be specified on a per endpoint basis. This option will reference a
stir_shaken_profile that can be configured in stir_shaken.conf. The type
of this option must be 'profile'. The stir_shaken option can be
specified on this object with the same values as before (attest, verify,
on), but it cannot be off since having the profile itself implies wanting
STIR/SHAKEN support. You can also specify an ACL from acl.conf (along
with permit and deny lines in the object itself) that will be used to
limit what interfaces Asterisk will attempt to retrieve information from
when reading the Identity header.
ASTERISK-29476
Change-Id: I87fa61f78a9ea0cd42530691a30da3c781842406
Some databases depending on their configuration using backslashes
for escaping. When combined with the use of ' this can result in
a broken func_odbc query.
This change adds a SQL_ESC_BACKSLASHES dialplan function which can
be used to escape the backslashes.
This is done as a dialplan function instead of being always done
as some databases do not require this, and always doing it would
result in incorrect data being put into the database.
ASTERISK-29838
Change-Id: I152bf34899b96ddb09cca3e767254d8d78f0c83d
Adds the m option to the Queue application, which allows a
music on hold class to be specified at runtime which will
override the class configured in queues.conf.
This option functions like the m option to Dial.
ASTERISK-29876 #close
Change-Id: Ie25a48569cf8755c305c9438b1ed292c3adcf8d7
Removes some leftover build and config references to
modules that have since been removed from Asterisk.
ASTERISK-29935 #close
Change-Id: Iaefc73a23f4b2de3c6c14d928050135b6d0ef6af
pbx.digium.com no longer accepts IAX2 calls and
there are no plans for it to come back.
Accordingly, nonworking IAX2 URIs are removed from
both the LICENSE file and the sample config.
ASTERISK-29923 #close
Change-Id: I257c54d4d812ed6b4bd4cbec2cd7ebe2b87b5bad
Whereas BLFs allow to show a display name for each RLS entry,
the asterisk provides only the extension now.
This is not end user friendly.
This commit adds a new resource_list option, resource_display_name,
to indicate whether display name of resource or the resource name being
provided for RLS entries.
If this option is enabled, the Display Name will be provided.
This option is disabled by default to remain the previous behavior.
If the 'event' set to 'presence' or 'dialog' the non-empty HINT name
will be set as the Display Name.
The 'message-summary' is not supported yet.
ASTERISK-29891 #close
Change-Id: Ic5306bd5a7c73d03f5477fe235e9b0f41c69c681
The disabledevents setting has been added to the general section
in manager.conf, which allows users to specify events that
should be globally disabled and not sent to any AMI listeners.
This allows for processing of these AMI events to end sooner and,
for frequent AMI events such as Newexten which users may not have
any need for, allows them to not be processed. Additionally, it also
cleans up core debug as previously when debug was 3 or higher,
the debug was constantly spammed by "Analyzing AMI event" messages
along with a complete dump of the event contents (often for Newexten).
ASTERISK-29853 #close
Change-Id: Id42b9a3722a1f460d745cad1ebc47c537fd4f205
added res_pjsip_outbound_registration to .requires in AST_MODULE_INFO
which fixes issue with module crashes on load "FRACK!, Failed assertion"
ASTERISK-29871
Change-Id: Ia0f49d048427a40e1b763296b834a52a03610096
Adds a new option, defaultenabled, to the CDR core to
control whether or not CDR is enabled on a newly created
channel. This allows CDR to be disabled by default on
new channels and require the user to explicitly enable
CDR if desired. Existing behavior remains unchanged.
ASTERISK-29808 #close
Change-Id: Ibb78c11974bda229bbb7004b64761980e0b2c6d1
Fixes 12pm noon incorrectly returning 0/a.m.
Also fixes a misspelling typo in the config.
ASTERISK-29695 #close
Change-Id: Ie40f9618636eb4c483b449bd707a5dcffca5c406
Includes some minor updates to extensions.conf
and iax.conf. In particular, the demonstration
of macros in extensions.conf is removed, as
Macro is deprecated and will be removed soon.
These examples have been replaced with examples
demonstrating the usage of Gosub instead.
The older exten => ...,n syntax is also mostly
replaced with the same keyword to demonstrate the
newer, more concise way of defining extensions.
IAXTEL no longer exists, so this example is replaced
with something more generic.
Some documentation is also added to extensions.conf
and iax.conf to clarify some of the new expanded
encryption capabilities with IAX2.
ASTERISK-29758 #close
Change-Id: I04fba9671aa1ee9ba1bd5027061f80bbe38e7b46
Correct typos of the following word families:
password
excludes
undesirable
checksums
through
screening
interpreting
database
causes
initiation
member
busydetect
defined
severely
throughput
recognized
counter
require
indefinitely
accounts
ASTERISK-29714
Change-Id: Ie8f2a7b274a162dd627ee6a2165f5e8a3876527e
The search for a running asterisk when --running is used
has been greatly simplified and in the event it doesn't
work, you can now specify a pid to use on the command
line with --pid.
The search for asterisk modules when --tarball-coredumps
is used has been enhanced to have a better chance of finding
them and in the event it doesn't work, you can now specify
--libdir on the command line to indicate the library directory
where they were installed.
The DATEFORMAT variable was renamed to DATEOPTS and is now
passed to the 'date' utility rather than running DATEFORMAT
as a command.
The coredump and output files are now renamed with DATEOPTS.
This can be disabled by specifying --no-rename.
Several confusing and conflicting options were removed:
--append-coredumps
--conffile
--no-default-search
--tarball-uniqueid
The script was re-structured to make it easier for follow.
Change-Id: I674be64bdde3ef310b6a551d4911c3b600ffee59
In res_pjsip_sdp_rtp, the bind_rtp_to_media_address option and the
fallback use of the transport's bind address solve problems sending
media on systems that cannot send ipv4 packets on ipv6 sockets, and
certain other situations. This change extends both of these behaviors
to UDPTL sessions as well in res_pjsip_t38, to fix fax-specific
problems on these systems, introducing a new option
endpoint/t38_bind_udptl_to_media_address.
ASTERISK-29402
Change-Id: I87220c0e9cdd2fe9d156846cb906debe08c63557
The behavior of max_contacts and remove_existing are connected. If
remove_existing is enabled, the soonest expiring contacts are removed.
This may occur when there is an unavailable contact. Similarly,
when remove_existing is not enabled, registrations from good
endpoints are rejected in favor of retaining unavailable contacts.
This commit adds a new AOR option remove_unavailable, and the effect
of this setting will depend on remove_existing. If remove_existing
is set to no, we will still remove unavailable contacts when they
exceed max_contacts, if there are any. If remove_existing is set to
yes, we will prioritize the removal of unavailable contacts before
those that are expiring soonest.
ASTERISK-29525
Change-Id: Ia2711b08f2b4d1177411b1be23e970d7fdff5784
Adds the ability for users to log to custom log levels
by providing custom log level names in logger.conf. Also
adds a logger show levels CLI command.
ASTERISK-29529
Change-Id: If082703cf81a436ae5a565c75225fa8c0554b702
This allows the STUN server to change its IP address without having to
reload the res_rtp_asterisk module.
The refresh of the name resolution occurs first when the module is
loaded, then recurringly, slightly after the previous DNS answer TTL
expires.
ASTERISK-29508 #close
Change-Id: I7955a046293f913ba121bbd82153b04439e3465f
This changeset is intended to address compatibility issues encountered
when interfacing Asterisk to electromechanical telephone switches that
implement ANI-B, ANI-C, or ANI-D.
In particular the behaviours that this impacts include:
- FGC-CAMA did not work at all when using MF signaling. Modified the
switch case block to send calls to the correct part of the
signaling-handling state machine.
- For FGC-CAMA operation, the delay between called number ST and
second wink for ANI spill has been made configurable; previously
all calls were made to wait for one full second.
- After the ANI spill, previous behavior was to require a 'ST' tone
to advance the call. This has been changed to allow 'STP' 'ST2P'
or 'ST3P' as well, for compatibility with ANI-D.
- Store ANI2 (ANI INFO) digits in the CALLERID(ANI2) channel variable.
- For calls with an ANI failure, No. 1 Crossbar switches will send
forward a single-digit failure code, with no calling number digits
and no ST pulse to terminate the spill. I've made the ANI timeout
configurable so to reduce dead air time on calls with ANI fail.
- ANI info digits configurable. Modern digital switches will send 2
digits, but ANI-B sends only a single info digit. This caused the
ANI reported by Asterisk to be misaligned.
- Changed a confusing log message to be more informative.
ASTERISK-29518
Change-Id: Ib7e27d987aee4ed9bc3663c57ef413e21b404256
Allow mapping pjproject log messages to the Asterisk TRACE
log level. The defaults were also changes to log pjproject
levels 3,4 to DEBUG and 5,6 to TRACE. Previously 3,4,5,6
all went to DEBUG.
ASTERISK-29582
Change-Id: I859a37a8dec263ed68099709cfbd3e665324c72d
Meter types are not well supported,
lacking support in telegraf, datadog and the official statsd servers.
We deprecate meters and provide a compliant fallback for any existing usages.
A flag has been introduced to allow meters to fallback to counters.
ASTERISK-29513
Change-Id: I5fcb385983a1b88f03696ff30a26b55c546a1dd7
A new user option, answer_channel, adds the capability to
prevent answering the channel if it hasn't already been
answered yet.
ASTERISK-29440
Change-Id: I26642729d0345f178c7b8045506605c8402de54b
By default Asterisk reports the PJSIP version in a SOFTWARE attribute
of every STUN packet it sends. This may not be desired in a production
environment, and RFC5389 recommends making the use of the SOFTWARE
attribute a configurable option:
https://datatracker.ietf.org/doc/html/rfc5389#section-16.1.2
This patch adds a `stun_software_attribute` yes/no option to make it
possible to omit the SOFTWARE attribute from STUN packets.
ASTERISK-29434
Change-Id: Id3f2b1dd9584536ebb3a1d7e8395fd8b3e46860b
RFC7616 and RFC8760 allow more than one WWW-Authenticate or
Proxy-Authenticate header per realm, each with different digest
algorithms (including new ones like SHA-256 and SHA-512-256).
Thankfully however a UAS can NOT send back multiple Authenticate
headers for the same realm with the same digest algorithm. The
UAS is also supposed to send the headers in order of preference
with the first one being the most preferred. We're supposed to
send an Authorization header for the first one we encounter for a
realm that we can support.
The UAS can also send multiple realms, especially when it's a
proxy that has forked the request in which case the proxy will
aggregate all of the Authenticate headers and then send them all
back to the UAC.
It doesn't stop there though... Each realm can require a
different username from the others. There's also nothing
preventing each digest algorithm from having a unique password
although I'm not sure if that adds any benefit.
So now... For each Authenticate header we encounter, we have to
determine if we support the digest algorithm and, if not, just
skip the header. We then have to find an auth object that
matches the realm AND the digest algorithm or find a wildcard
object that matches the digest algorithm. If we find one, we add
it to the results vector and read the next Authenticate header.
If the next header is for the same realm AND we already added an
auth object for that realm, we skip the header. Otherwise we
repeat the process for the next header.
In the end, we'll have accumulated a list of credentials we can
pass to pjproject that it can use to add Authentication headers
to a request.
NOTE: Neither we nor pjproject can currently handle digest
algorithms other than MD5. We don't even have a place for it in
the ast_sip_auth object. For this reason, we just skip processing
any Authenticate header that's not MD5. When we support the
others, we'll move the check into the loop that searches the
objects.
Changes:
* Added a new API ast_sip_retrieve_auths_vector() that takes in
a vector of auth ids (usually supplied on a call to
ast_sip_create_request_with_auth()) and populates another
vector with the actual objects.
* Refactored res_pjsip_outbound_authenticator_digest to handle
multiple Authenticate headers and set the stage for handling
additional digest algorithms.
* Added a pjproject patch that allows them to ignore digest
algorithms they don't support. This patch has already been
merged upstream.
* Updated documentation for auth objects in the XML and
in pjsip.conf.sample.
* Although res_pjsip_authenticator_digest isn't affected
by this change, some debugging and a testsuite AMI event
was added to facilitate testing.
Discovered during OpenSIPit 2021.
ASTERISK-29397
Change-Id: I3aef5ce4fe1d27e48d61268520f284d15d650281
Although Asterisk can receive and propogate flash events, it currently
provides no mechanism for doing anything with them itself.
This AMI event allows flash events to be processed by Asterisk.
Additionally, AST_CONTROL_FLASH is included in a switch statement
in channel.c to avoid throwing a warning when we shouldn't.
ASTERISK-29380
Change-Id: Ie17ffe65086e0282c88542e38eed6a461ec79e81
STIR/SHAKEN encodes using base64 URL format. Currently, we just use
base64. New functions have been added that convert to and from base64
encoding.
The origid field should also be an UUID. This means there's no reason to
have it as an option in stir_shaken.conf, as we can simply generate one
when creating the Identity header.
https://wiki.asterisk.org/wiki/display/AST/OpenSIPit+2021
Change-Id: Icf094a2a54e87db91d6b12244c9f5ba4fc2e0b8c
During OpenSIPit, we found out that the public certificates must be of
type X.509. When reading in public keys, we use the corresponding X.509
functions now.
We also discovered that we needed a better naming scheme for the
certificates since certificates with the same name would cause issues
(overwriting certs, etc.). Now when we download a public certificate, we
get the serial number from it and use that as the name of the cached
certificate.
The configuration option public_key_url in stir_shaken.conf has also
been renamed to public_cert_url, which better describes what the option
is for.
https://wiki.asterisk.org/wiki/display/AST/OpenSIPit+2021
Change-Id: Ia00b20835f5f976e3603797f2f2fb19672d8114d
Added support for a basic AEAP configuration read from aeap.conf.
Also added 2 CLI commands for showing individual configurations as
well as all of them: aeap show server <id> and aeap show servers.
Only one configuration option is required at the moment, and that one is
server_url. It must be a websocket URL. The other option, codecs, is
optional and will be used over the codecs specified on the endpoint if
provided.
https://wiki.asterisk.org/wiki/pages/viewpage.action?pageId=45482453
Change-Id: I567ac5148c92b98d29d2ad83421b416b75ffdaa3
Sean Bright
Samuel Olaechea
Naveen Albert
George Joseph
Jaco Kroon
Nathan Bruning
Sean Bright
Joshua Colp
Holger Hans Peter Freyther
Mike Bradeen
Michael Kuron
Henning Westerholt
George Joseph
sungtae kim
Ben Ford
Sam Banks
Kevin Harwell
Michael Cargile
Mark Petersen
Alexei Gradinari
Sean Bright
Josh Soref
Matthew Kern
Joseph Nadiv
Sebastien Duthil
Sarah Autumn
Rijnhard Hessel
Naveen Albert
Jeremy Lainé