This is a normal condition for a first offer. Reduce log level to debug.
NGCP-Flow: mr13.1
Change-Id: I785cee82ead90b1e797c09017c3e3a77da113553
(cherry picked from commit d483ef185bb846a9695584944233f61546fdb0f7)
If the receiver of a previously passthrough T.30 stream gets switched to
a generated PCM stream from a T.38 gateway, continue the sequencing of
the previous SSRC. Technically this is not necessary as the generated
PCM stream gets a new SSRC, but at least Asterisk seems to ignore this
and expect sequencing to continue, and will ignore PCM if the sequence
jump is too large.
Change-Id: Ia4656770db11f5fa1a1e9bf5bd71a0398deb1e00
(cherry picked from commit 18579227a9)
Just add the make target. Don't run it as part of the test suite as it's
quite extensive. Update the script a bit as well.
Change-Id: I192e90413bd7ffde842571324c816e4271367b42
(cherry picked from commit 0f55781a58)
Add a simple function that acts as an encryption callback to just update
the ext_seq (index) of the egress SSRC context. The kernel module
already does this, but the daemon only did it when SRTP was involved.
This now tracks egress packet indexes in all cases.
Change-Id: I9460744de55ead4b05aceb322fd8482442ff2b41
(cherry picked from commit 0da49000ba)
Some components (the timer thread used by the codec handlers in
particular) may hold references to components owned by the codeclib (the
.so handles in particular). Move codeclib cleanup towards the end.
Change-Id: Ic581588c27b69c025576c14a69e999c9ca5d1597
(cherry picked from commit 43cc9cc06d)
Fixes a corner case that happens when trying to delete a call created with
ng offer and no-redis-update flag and for which no ng answer was received.
In such cases, one would receive warning messages from Redis
"ERR DB index is out of range".
What happens is that on call creation redis_hosted_db defaults to -1. This
value is changed when writing to Redis, but the writing is not done for a
ng offer with no-redis-update.
Kudos go to Pawel Kuzak.
Closes#1910
Change-Id: Iad19ec8ac69b169e6352662697b17eb23e6970fb
(cherry picked from commit bba9625b25)
These are potentially computed from inside each subdir, and in addition
due to what appears to be a regression in GNU make 4.4, where it is
reevaluating variables that contain $(shell) functions, many times (in
the order of thousands, this was slowing down the build, were on the
Debian amd64 build daemons it went from 5m with GNU make 4.3 to 2h40m
with GNU make 4.4. Although the bulk of the slow down has been fixed
with previous commits, the remaining optimizations are only to avoid
this potentially happening again in the future, and to reduce useless
duplicate work.
Instead of trying to cache the values from within make itself, where
programming this there is extremely painful, and does not seem to be
able to greatly reduce the number of calls, because the build system
is going to be called multiple times for different targets. Simply
externalize the generation into several shell scripts, that we call
to generate a make fragment that then we include from the various
Makefiles.
For a Debian build with GNU make 4.3, this reduces the amount of total
pkg-config calls from around ~1600 to 128, for dpkg-buildflags from
~1100 down to 6, and for dpkg-parsechangelog from ~56 to 17, but the
slow down is not as significant there anyway.
For a Debian build with GNU make 4.4, this reduces the amount of total
pkg-config calls from around ~2600 to 128, for dpkg-buildflags from
~2800 down to 6, and for dpkg-parsechangelog from ~350 to 21.
For a Debian build with GNU make 4.4, this reduces the build time
on this system from 2m10s to ~ 1m30s.
Change-Id: I427d0ea5106dc6ed1ff9e664ccdba2fa0725b7d0
(cherry picked from commit 7dbe24e4e5)
This variable is unknown to dpkg-buildflags. This also reduces the
amount of global calls generated with GNU make 4.4 (which has a
regression causing massive amounts of shell calls to be generated).
Change-Id: Ia9d7099228bf5e181df4725939ed4f76f1e63dc9
(cherry picked from commit bb2bf3a702)
This makes sure the target is the default, regardless of the place where
it gets declared, so that we do not get surprises due to targets
declared in includes that might happened to be performed before the
default target.
Change-Id: I2fab47ccb46d68dc56332acef966e369c5183c07
(cherry picked from commit 5cb1002949)
Starting with GNU make 4.4, build time have massively regressed
where before they would take 5m on amd64 now can take 2h40m. While this
seems clearly broken, the release notes are filled with notices for
breaking changes, and in particular the one for passing all make
variables down to the invoked programs executed via the «shell» GNU make
function, so it is not clear what is expected breakage and what is not.
This has been reported in Debian, but not yet upstream, and while it
seems like a clear regression, it's not clear what will be the upstream
take on it. For now apply workarounds that do not change semantics, and
which do not regress with older GNU make versions.
Use the GNU make «origin» function instead of «?=» which defaults to
defining a variable as a recursive one. Coerce already defined variables
into simple ones to avoid GNU make re-evaluating these variables for
each «shell» function invocation.
Ref: https://bugs.debian.org/1092051
Change-Id: I076fc05dd616918473a22e7e942fecfdc9851d47
(cherry picked from commit 887fb40f3f)
Make sure we properly return a failure if no supported payload type is
present.
Change-Id: Ia483e0819b2d8ca0c2c5184c929dfe3d05c96ca1
(cherry picked from commit 5f6609de5d)
Make sure a codec is not only known to us, but that it can actually be
used, in places where it makes sense. This is partially redundant
because ensure_codec_def_type already takes care of this, but a codec
definition may come from a different source, so it doesn't help to
double check.
Change-Id: I91af84afc2477840f1400674b2538ad8fb7746ee
(cherry picked from commit 7b60e85970)
Deleting a call can have the side effect of changing the active Redis DB
on the writing instance. Restore the correct DB afterwards if needed.
Fixes#1905
Change-Id: I12dae767ffa5d25703e024d2ec59aa21ba9da101
(cherry picked from commit fdabc9b59e)
A call that gets created but then doesn't get initialised would have its
Redis DB left at zero. At destruction it would then try to switch to DB
zero. Fix this by using an appropriate initial value.
Closes#1905
Change-Id: I852e48c5a06b732b37d2ccd5c478de4760aacd4e
(cherry picked from commit add46f265a)
If keyspace notifications are used at all, the respective objects and
threads must be created during startup. This requires at least some
keyspace to be configured. To support usage without any keyspaces
initially (and add them during runtime), add a special case (set
keyspace to -1).
Convert all keyspace variables to signed ints. Ignore negative keyspace
numbers where appropriate. Support Redis endpoint addresses without
database number.
Fixes#1902
Change-Id: I45a3c87bc515f9b14e64ec1ec0906dde271b5f8d
(cherry picked from commit fb1ad3f0cf)
If keyspace notifications are not configured at all, bail with an error
when there is an attempt to add a new keyspace or remove one. We get a
segfault otherwise.
Closes#1902
Change-Id: Ie47cf5f7762792aabe38476739f0dcf9927787ce
(cherry picked from commit 6dbf098bc7)
Avoids segfault is extra connection can't be established
Closes#1903
Change-Id: I6eb7315f6774015703c7ad036e08596f7f550d60
(cherry picked from commit 172f389395)
A matching payload type number in an answer might not be enough to
establish compatible codecs. Also check the format parameters. Reject
and ignore answer codecs that are not compatible.
Change-Id: I12a1287216886926ec4b3c704029c923f815b429
(cherry picked from commit 9c00f30475)
Teach rtpengine to distinguish between G.729 with and without annex B,
which are incompatible to each other.
Change-Id: I09b66a097007ba3283546880f06f81b4f89e126d
(cherry picked from commit 7ab4009a0b)
Make entry tree simpler and give
links to commonly used things like
NG control protocol.
This simplifies usage of documentation.
Change-Id: I1283bf8a88c7c6e4ff7ab9451610bc6e224c0119
(cherry picked from commit 16b7200ed1)
Secondary titles have to be smaller:
- to embed it easier into the toctree of index file
- to have better readability for users (github,RTD)
Change-Id: If8f97f97b1d64b7593228eeda16c794e66453c27
(cherry picked from commit 2514d36129)
Remove the intro information from index,
because already mentioned in the overview.
Also change a greeting title.
Change-Id: I5c232fa033eac8e3097ad5adb351e8940a33a4ee
(cherry picked from commit a07b972000)
HTTP/WS init creates worker threads, which would be terminated by a fork
to background. Reverse the order.
Closes#1896
Possibly also relevant to #1895
Change-Id: I30b61e07ad3bed41b6b241e8943ed479277c1474
(cherry picked from commit dd04af1163)
Some compilers seem to think that there is some uninitialised usage
here. Work around this.
Closes#1891
Change-Id: Ic97a4b589fd2a0c33418a209557b7ce29009c7bf
(cherry picked from commit 4b614d8ce0)
If recording-method is pcap, then proc is zero-initialized, so
meta_filepath is empty. This shows many logs such as:
[core] Failed to open recording metadata file '(null)' for writing: Bad address
Prevent them by returning earlier.
Closes#1889
Change-Id: Ifeb3038f9a5c0bd6a9b7dd92842dd61783b40263
(cherry picked from commit 759fd72dc6)
Fixes regression from the SDP printing rework.
Fixes#1885
(We should add tests for this...)
Change-Id: I2154cd61fbe4a0c9bf63a25128f038068acffa0a
(cherry picked from commit 1a1eaab50b)
Richard Fuchs
Lucian Balaceanu
Guillem Jover
Donat Zenichev
Sipwise Jenkins Builder
Orgad Shaneh