We get the following error message in /var/log/vboxadd-install.log,
/var/log/deployment-installer-debug.log, /var/log/daemon.log +
/var/log/syslog:
| /opt/VBoxGuestAdditions-7.0.6/bin/VBoxClient: error while loading shared libraries: libXmu.so.6: cannot open shared object file: No such file or directory
This is caused by missing libxmu6:
| [sipwise-lab-trunk] sipwise@spce:~$ /opt/VBoxGuestAdditions-7.0.6/bin/VBoxClient --help
| /opt/VBoxGuestAdditions-7.0.6/bin/VBoxClient: error while loading shared libraries: libXmu.so.6: cannot open shared object file: No such file or directory
| [sipwise-lab-trunk] sipwise@spce:~$ sudo apt install libxmu6
| Reading package lists... Done
| Building dependency tree... Done
| Reading state information... Done
| The following NEW packages will be installed:
| libxmu6
| 0 upgraded, 1 newly installed, 0 to remove and 83 not upgraded.
| Need to get 60.1 kB of archives.
| After this operation, 143 kB of additional disk space will be used.
| Get:1 https://debian.sipwise.com/debian bookworm/main amd64 libxmu6 amd64 2:1.1.3-3 [60.1 kB]
| Fetched 60.1 kB in 0s (199 kB/s)
| [...]
| [sipwise-lab-trunk] sipwise@spce:~$ /opt/VBoxGuestAdditions-7.0.6/bin/VBoxClient --help
| Oracle VM VirtualBox VBoxClient 7.0.6
| Copyright (C) 2005-2023 Oracle and/or its affiliates
|
| Usage: VBoxClient --clipboard|--draganddrop|--checkhostversion|--seamless|--vmsvga|--vmsvga-session
| [-d|--nodaemon]
|
| Options:
| [...]
It looks like lack of libxmu6 doesn't cause any actual problems for our
use case (we don't use X.org at all), though given that libxmu6 is a
small library package, let's try to get it working as expected and avoid
the alarming errors on the logs.
Thanks Guillem Jover for spotting and reporting
Change-Id: I65f3dd496a4026f04fd9944fd7cc43d6abbdf336
During initial deployment of a system, we get warnings about
lack of zstd:
| Setting up linux-image-6.1.0-13-amd64 (6.1.55-1) ...
| I: /vmlinuz.old is now a symlink to boot/vmlinuz-6.1.0-13-amd64
| I: /initrd.img.old is now a symlink to boot/initrd.img-6.1.0-13-amd64
| I: /vmlinuz is now a symlink to boot/vmlinuz-6.1.0-13-amd64
| I: /initrd.img is now a symlink to boot/initrd.img-6.1.0-13-amd64
| /etc/kernel/postinst.d/initramfs-tools:
| update-initramfs: Generating /boot/initrd.img-6.1.0-13-amd64
| W: No zstd in /usr/bin:/sbin:/bin, using gzip
| [...]
The initramfs generation and update overall runs *four* times within the
initial bootstrapping of a system (we'll try to do something about this,
but this is outside the scope of this).
As of initramfs-tools v0.141, initramfs-tools uses zstd as default
compression for initramfs. Version 0.142 is shipped with
Debian/bookworm, and therefore it makes sense to have it available
upfront. Note that also the initrd generation is faster with zstd
(~10sec for zstd vs. ~13sec for gzip) and also the resulting initrd is
smaller (~33MB for zstd vs ~39MB for gzip).
By making sure that zstd is available straight from the very beginning
and before ngcp-installer pulls it in later, we can avoid the warning
message but also save >10 seconds of install time.
Given that zstd is available even in Debian oldoldstable, let's install
it unconditionally in all our systems.
Thanks: Volodymyr Fedorov for reporting
Change-Id: I56674c3c213f7c7a6e6cbce3c8e2e00a4cfbdbd4
Even though the ntpsec.service contains an Alias for ntp.service,
that does not work for us when the service has not yet been installed,
so the first run will fail. Use the actual name to avoid this issue.
Change-Id: I8f0ee3b38390a7e58c3bbee65fd96bfd4b717dfa
It's better to have this package in grml-sipwise image so any system
with this network card can use all it's power even in deployment stage.
Change-Id: I765efcf446a410a42ef156b2ccc2e6612a33ddd6
Let's restore system state of /run/systemd/system for
VBoxLinuxAdditions, to avoid any unexpected side effects.
Followup for git rev 8601193
Change-Id: I632c7d60ebb627c3a80d4c1f9b264d6d0a13b4f1
Recent Grml ISOs, including our Grml-Sipwise ISO (v2023-06-01), include
grml-autoconfig v0.20.3 which execute the grml-autoconfig service under
`StandardInput=null`. This is necessary to not conflict with tty usage,
like used with serial console. See
1e268ffe4f
Now that we run with /dev/null for stdin, we can't interact with the
user, so let's try to detect when running from within grml-autoconfig's
systemd unit, and if so assume that we're executing on /dev/tty1 and
use/reopen that for stdin.
Change-Id: Id55283c7f862487a6ef8acb8ab01f67a05bd8dd7
As of git rev 6c960afee4 we're using the
virtualbox-guest-additions-iso from bookworm.
Previous versions of VBoxGuestAdditions had a simple test to check for
present of systemd, quoting from
/opt/VBoxGuestAdditions-6.1.22/routines.sh:
| use_systemd()
| {
| test ! -f /sbin/init || test -L /sbin/init
| }
Now in more recent versions of VBoxGuestAdditions[1], the systemd check
was modified, quoting from /opt/VBoxGuestAdditions-7.0.6/routines.sh:
| use_systemd()
| {
| # First condition is what halfway recent systemd uses itself, and the
| # other two checks should cover everything back to v1.
| test -e /run/systemd/system || test -e /sys/fs/cgroup/systemd || test -e /cgroup/systemd
| }
So if we're running inside a chroot as with our deployment.sh, it looks
like a non-systemd system for VBoxGuestAdditions's installer, and we end
up with installation and presence of /etc/init.d/vboxadd, leading to:
| root@spce:~# ls -lah /run/systemd/generator.late/
| total 4.0K
| drwxr-xr-x 4 root root 100 Jul 18 00:20 .
| drwxr-xr-x 23 root root 580 Jul 18 00:20 ..
| drwxr-xr-x 2 root root 60 Jul 18 00:20 graphical.target.wants
| drwxr-xr-x 2 root root 60 Jul 18 00:20 multi-user.target.wants
| -rw-r--r-- 1 root root 537 Jul 18 00:20 vboxadd.service
|
| root@spce:~# systemctl cat vboxadd.service
| # /run/systemd/generator.late/vboxadd.service
| # Automatically generated by systemd-sysv-generator
|
| [Unit]
| Documentation=man:systemd-sysv-generator(8)
| SourcePath=/etc/init.d/vboxadd
| Description=LSB: VirtualBox Linux Additions kernel modules
| Before=multi-user.target
| Before=multi-user.target
| Before=multi-user.target
| Before=graphical.target
| Before=display-manager.service
|
| [Service]
| Type=forking
| Restart=no
| TimeoutSec=5min
| IgnoreSIGPIPE=no
| KillMode=process
| GuessMainPID=no
| RemainAfterExit=yes
| SuccessExitStatus=5 6
| ExecStart=/etc/init.d/vboxadd start
| ExecStop=/etc/init.d/vboxadd stop
We don't expect any init scripts to be present, as all our services must
have systemd unit files. Therefore we check for absence of systemd's
/run/systemd/generator.late in our system-tests, which started to fail
with the upgrade to VBoxGuestAdditions-v7.0.6 due to the systemd
presence detection mentioned above.
Let's fake presence of systemd before invoking VBoxGuestAdditions's
installer, to avoid ending up with unexpected vbox* init scripts.
[1] See svn rev 92682:
https://www.virtualbox.org/browser/vbox/trunk/src/VBox/Installer/linux/routines.sh?rev=92682https://www.virtualbox.org/changeset?old=92681&old_path=vbox%2Ftrunk%2Fsrc%2FVBox%2FInstaller%2Flinux%2Froutines.sh&new=92682&new_path=vbox%2Ftrunk%2Fsrc%2FVBox%2FInstaller%2Flinux%2Froutines.sh
Change-Id: Ifd11460e3a8fd4f4c1269453a9b8376065861b8e
Support bookworm option in DEBIAN_RELEASE selection. We have support
for it already.
Use bookworm as fallback since nowadays we jumped to it.
Change-Id: I118c1b5cf81fe57394495b5f745fc81032406c78
To be able to upgrade our internal systems to Debian/bookworm
we need to have puppet packages available.
Upstream still doesn't provide any Debian packages
(see https://tickets.puppetlabs.com/browse/PA-4995),
though their AIO (All In One) packages for Debian/bullseye
seem to be working on Debian/bookworm as well (at least for
puppet-agent). So until we either migrated to puppet-agent
as present in Debian/bookworm or upstream provides according
AIO packages, let's use the puppet-agent packages we already
use for our Debian/bullseye systems.
Change-Id: I2211ffd79f70a2a79873e737b0b512bfb7492328
Since version 1.20.0, dpkg no longer creates /var/lib/dpkg/available
(see #647911). Now that we upgraded our Grml-Sipwise deployment system
to bookworm, we have dpkg v1.21.22 on our live system, and mmdebstrap
relies on dpkg of the host system for execution.
But on Debian releases until and including buster, dpkg fails to operate
with e.g. `dpkg --set-selections`, if /var/lib/dpkg/available doesn't
exist:
| The following NEW packages will be installed:
| nullmailer
| [...]
| debconf: delaying package configuration, since apt-utils is not installed
| dpkg: error: failed to open package info file '/var/lib/dpkg/available' for reading: No such file or directory
We *could* also switch from mmdebstrap to debootstrap for deploying
Debian releases <=buster, but this would be slower and we use mmdebstrap
since quite some time for everything. So instead let's create
/var/lib/dpkg/available after bootstrapping the system.
Reported towards mmdebstrap as #1037946.
Change-Id: I0a87ca255d5eb7144a9c093051c0a6a3114a3c0b
Now that our deployment system is based on Debian/bookworm, but our
gerrit/git server still runs on Debian/bullseye, we run into the OpenSSH
RSA issue (RSA signatures using the SHA-1 hash algorithm got disabled by default), see
https://michael-prokop.at/blog/2023/06/11/what-to-expect-from-debian-bookworm-newinbookworm/
and https://www.jhanley.com/blog/ssh-signature-algorithm-ssh-rsa-error/
We need to enable ssh-rsa usage, otherwise deployment fails with:
| Warning: Permanently added '[gerrit.mgm.sipwise.com]:29418' (ED25519) to the list of known hosts.
| sign_and_send_pubkey: no mutual signature supported
| puppet-r10k@gerrit.mgm.sipwise.com: Permission denied (publickey).
| fatal: Could not read from remote repository.
Change-Id: I5894170dab033d52a2612beea7b6f27ab06cc586
Deploying the Debian/bookworm based NGCP system fails on a Lenovo sr250
v2 node with an Intel E810 network card:
| # lshw -c net -businfo
| Bus info Device Class Description
| =======================================================
| pci@0000:01:00.0 eth0 network Ethernet Controller E810-XXV for SFP
| pci@0000:01:00.1 eth1 network Ethernet Controller E810-XXV for SFP
| # lshw -c net
| *-network:0
| description: Ethernet interface
| product: Ethernet Controller E810-XXV for SFP
| vendor: Intel Corporation
| physical id: 0
| bus info: pci@0000:01:00.0
| logical name: eth0
| version: 02
| serial: [...]
| size: 10Gbit/s
| capacity: 25Gbit/s
| width: 64 bits
| clock: 33MHz
| capabilities: pm msi msix pciexpress vpd bus_master cap_list rom ethernet physical fibre 1000bt-fd 25000bt-fd
| configuration: autonegotiation=off broadcast=yes driver=ice driverversion=1.11.14 duplex=full firmware=2.25 0x80007027 1.2934.0 ip=192.168.90.51 latency=0 link=yes multicast=yes port=fibre speed=10Gbit/s
| resources: iomemory:400-3ff iomemory:400-3ff irq:16 memory:4002000000-4003ffffff memory:4006010000-400601ffff memory:a1d00000-a1dfffff memory:4005000000-4005ffffff memory:4006220000-400641ffff
We set up the /etc/network/interfaces file by invoking Grml's
netcardconfig script in automated mode, like:
NET_DEV=eth0 METHOD=static IPADDR=192.168.90.51 NETMASK=255.255.255.248 GATEWAY=192.168.90.49 /usr/sbin/netcardconfig
The resulting /etc/network/interfaces gets used as base for usage inside
the NGCP chroot/target system. netcardconfig shuts down the network
interface (eth0 in the example above) via ifdown, then sleeps for 3
seconds and re-enables the interface (via ifup) with the new
configuration.
This used to work fine so far, but with the Intel e810 network card and
kernel version 6.1.0-9-amd64 from Debian/bookworm we see a link failure
and it takes ~10 seconds until the network device is up and running
again. The following vagrant_configuration() execution from
deployment.sh then fails:
| +11:41:01 (netscript.grml:1022): vagrant_configuration(): wget -O /var/tmp/id_rsa_sipwise.pub http://builder.mgm.sipwise.com/vagrant-ngcp/id_rsa_sipwise.pub
| --2023-06-11 11:41:01-- http://builder.mgm.sipwise.com/vagrant-ngcp/id_rsa_sipwise.pub
| Resolving builder.mgm.sipwise.com (builder.mgm.sipwise.com)... failed: Name or service not known.
| wget: unable to resolve host address 'builder.mgm.sipwise.com'
However, when we retry it again just a bit later, the network works fine
again. During investigation we identified that the network card flips
the port, quoting the related log from the connected Cisco nexus 5020
switch (with fast stp learning mode):
| nexus5k %ETHPORT-5-IF_DOWN_LINK_FAILURE: Interface Ethernet1/33 is down (Link failure)
It seems to be related to some autonegotiation problem, as when we
execute `ethtool -A eth0 rx on tx on` (no matter whether with `on` or
`off`), we see:
| [Tue Jun 13 08:51:37 2023] ice 0000:01:00.0 eth0: Autoneg did not complete so changing settings may not result in an actual change.
| [Tue Jun 13 08:51:37 2023] ice 0000:01:00.0 eth0: NIC Link is Down
| [Tue Jun 13 08:51:45 2023] ice 0000:01:00.0 eth0: NIC Link is up 10 Gbps Full Duplex, Requested FEC: RS-FEC, Negotiated FEC: NONE, Autoneg Advertised: On, Autoneg Negotiated: False, Flow Control: Rx/Tx
FTR:
| root@sp1 ~ # ethtool -A eth0 autoneg off
| netlink error: Operation not supported
| 76 root@sp1 ~ # ethtool eth0 | grep -C1 Auto-negotiation
| Duplex: Full
| Auto-negotiation: off
| Port: FIBRE
| root@sp1 ~ # ethtool -A eth0 autoneg on
| root@sp1 ~ # ethtool eth0 | grep -C1 Auto-negotiation
| Duplex: Full
| Auto-negotiation: off
| Port: FIBRE
| root@sp1 ~ # dmesg -T | tail -1
| [Tue Jun 13 08:53:26 2023] ice 0000:01:00.0 eth0: To change autoneg please use: ethtool -s <dev> autoneg <on|off>
| root@sp1 ~ # ethtool -s eth0 autoneg off
| root@sp1 ~ # ethtool -s eth0 autoneg on
| netlink error: link settings update failed
| netlink error: Operation not supported
| 75 root@sp1 ~ #
As a workaround, at least until we have a better fix/solution, we try to
reach the default gateway (or fall back to the repository host if
gateway couldn't be identified) via ICMP/ping, and once that works we we
continue as usual. But even if that should fail we continue execution,
to minimize behavior change but have a workaround for this specific
situation available.
FTR, broken system:
| root@sp1 ~ # ethtool -i eth0
| driver: ice
| version: 6.1.0-9-amd64
| firmware-version: 2.25 0x80007027 1.2934.0
| [...]
Whereas with kernel 5.10.0-23-amd64 from Debian/bullseye we don't seem
to see that behavior:
| root@sp1:~# ethtool -i neth0
| driver: ice
| version: 5.10.0-23-amd64
| firmware-version: 2.25 0x80007027 1.2934.0
| [...]
Also using latest available ice v1.11.14 (from
https://sourceforge.net/projects/e1000/files/ice%20stable/1.11.14/)
on Kernel version 6.1.0-9-amd64 doesn't bring any change:
| root@sp1 ~ # modinfo ice
| filename: /lib/modules/6.1.0-9-amd64/updates/drivers/net/ethernet/intel/ice/ice.ko
| firmware: intel/ice/ddp/ice.pkg
| version: 1.11.14
| license: GPL v2
| description: Intel(R) Ethernet Connection E800 Series Linux Driver
| author: Intel Corporation, <linux.nics@intel.com>
| srcversion: 818E9C817731C98A25470C0
| alias: pci:v00008086d00001888sv*sd*bc*sc*i*
| [...]
| alias: pci:v00008086d00001591sv*sd*bc*sc*i*
| depends: ptp
| retpoline: Y
| name: ice
| vermagic: 6.1.0-9-amd64 SMP preempt mod_unload modversions
| parm: debug:netif level (0=none,...,16=all) (int)
| parm: fwlog_level:FW event level to log. All levels <= to the specified value are enabled. Values: 0=none, 1=error, 2=warning, 3=normal, 4=verbose. Invalid values: >=5
| (ushort)
| parm: fwlog_events:FW events to log (32-bit mask)
| (ulong)
| root@sp1 ~ # ethtool -i eth0 | head -3
| driver: ice
| version: 1.11.14
| firmware-version: 2.25 0x80007027 1.2934.0
| root@sp1 ~ #
Change-Id: Ieafe648be4e06ed0d936611ebaf8ee54266b6f3c
Re-reading of disks fails if the mdadm SW-RAID device is still active:
| root@sp1 ~ # cat /proc/mdstat
| Personalities : [linear] [multipath] [raid0] [raid1] [raid6] [raid5] [raid4] [raid10]
| md0 : active raid1 sdb3[1] sda3[0]
| 468218880 blocks super 1.2 [2/2] [UU]
| [========>............] resync = 42.2% (197855168/468218880) finish=22.4min speed=200756K/sec
| bitmap: 3/4 pages [12KB], 65536KB chunk
|
| unused devices: <none>
| root@sp1 ~ # blockdev --rereadpt /dev/sdb
| blockdev: ioctl error on BLKRRPART: Device or resource busy
| 1 root@sp1 ~ # blockdev --rereadpt /dev/sda
| blockdev: ioctl error on BLKRRPART: Device or resource busy
| 1 root@sp1 ~ #
Only if we stop the mdadm SW-RAID device, then we can re-read the
partition table:
| root@sp1 ~ # mdadm --stop /dev/md0
| mdadm: stopped /dev/md0
| root@sp1 ~ # blockdev --rereadpt /dev/sda
| root@sp1 ~ #
This behavior isn't new and unrelated to Debian/bookworm but was spotted
while debugging an unrelated issue.
FTR: we re-read the partition table (via `blockdev --rereadpt`) to ensure
that /etc/fstab of the live system is up2date and matches the current
system state. While this isn't stricly needed, we preserve existing
behavior and also try to avoid a hard "cut" of a possibly ongoing
SW-RAID sync.
Change-Id: I735b00423e6efa932f74b78a38ed023576e5d306
With our newer Grml-Sipwise ISO (v2023-06-01) being based on
Debian/bookworm and recent Grml packages, our automated deployment
suddenly started to fail for us:
| +04:28:12 (netscript.grml:2453): echo 'Successfully finished deployment process [Fri Jun 2 04:28:12 UTC 2023 - running 576 seconds]'
| ++04:28:12 (netscript.grml:2455): get_deploy_status
| ++04:28:12 (netscript.grml:95): get_deploy_status(): '[' -r /srv/deployment//status ']'
| ++04:28:12 (netscript.grml:96): get_deploy_status(): cat /srv/deployment//status
| Successfully finished deployment process [Fri Jun 2 04:28:12 UTC 2023 - running 576 seconds]
| +04:28:12 (netscript.grml:2455): '[' copylogfiles '!=' error ']'
| +04:28:12 (netscript.grml:2456): set_deploy_status finished
| +04:28:12 (netscript.grml:103): set_deploy_status(): '[' -n finished ']'
| +04:28:12 (netscript.grml:104): set_deploy_status(): echo finished
| +04:28:12 (netscript.grml:2459): false
| +04:28:12 (netscript.grml:2463): status_wait
| +04:28:12 (netscript.grml:329): status_wait(): [[ -n 0 ]]
| +04:28:12 (netscript.grml:329): status_wait(): [[ 0 != 0 ]]
| +04:28:12 (netscript.grml:2466): false
| +04:28:12 (netscript.grml:2471): false
| +04:28:12 (netscript.grml:2476): echo 'Do you want to [r]eboot or [h]alt the system now? (Press any other key to cancel.)'
| Do you want to [r]eboot or [h]alt the system now? (Press any other key to cancel.)
| +04:28:12 (netscript.grml:2477): unset a
| +04:28:12 (netscript.grml:2478): read -r a
| ++04:28:12 (netscript.grml:2478): wait_exit
| ++04:28:12 (netscript.grml:339): wait_exit(): local e_code=1
| ++04:28:12 (netscript.grml:340): wait_exit(): [[ 1 -ne 0 ]]
| ++04:28:12 (netscript.grml:341): wait_exit(): set_deploy_status error
| ++04:28:12 (netscript.grml:103): set_deploy_status(): '[' -n error ']'
| ++04:28:12 (netscript.grml:104): set_deploy_status(): echo error
| ++04:28:12 (netscript.grml:343): wait_exit(): trap '' 1 2 3 6 15 ERR EXIT
| ++04:28:12 (netscript.grml:344): wait_exit(): status_wait
| ++04:28:12 (netscript.grml:329): status_wait(): [[ -n 0 ]]
| ++04:28:12 (netscript.grml:329): status_wait(): [[ 0 != 0 ]]
| ++04:28:12 (netscript.grml:345): wait_exit(): exit 1
As of grml-autoconfig v0.20.3 and newer, the grml-autoconfig systemd service
that invokes the deployment netscript uses `StandardInput=null` instead of
`StandardInput=tty` (see https://github.com/grml/grml/issues/176).
Thanks to this, a logic error in our deployment script showed up. We
exit the script in interactive mode, though only *afterwards* prompting
for reboot/halt with `read -r a` - which of course fails if stdin is
missing. As a result, we end up in our signal handler `trap 'wait_exit;'
1 2 3 6 15 ERR EXIT` and then fail the deployment.
So instead prompt for "Do you want to [r]eboot or [h]alt ..." *only* in
interactive mode, and while at it drop the "if "$INTERACTIVE" ; then
exit 0 ; fi" so the prompt is actually presented to the user.
Change-Id: Ia89beaf3c446f3701cc30ab21cfdff7b5808a6d3
Manual execution of python's http.server has multiple drawbacks, like no
proper logging and no service tracking/restart options, but most notably
the deployment status server no longer runs when our deployment script
fails.
While /srv/deployment/status then still might contain "error", no one is
serving that information on port 4242 any longer[1], and our
daily-build-install-vm Jenkins job might then report:
| VM '192.168.209.162' current state is '' - retrying up to another 1646 times, sleeping for a second
| VM '192.168.209.162' current state is '' - retrying up to another 1645 times, sleeping for a second
| [...]
It then runss for ~1/2 hour without doing anything useful, until the
Jenkins job itself gives up.
By running our deployment status server under systemd, we keep the
service alive also when the deployment script terminates. In case of
errors we get immediate feedback:
| VM '192.168.209.162' current state is 'puppet' - retrying up to another 1648 times, sleeping for a second
| VM '192.168.209.162' current state is 'puppet' - retrying up to another 1647 times, sleeping for a second
| VM '192.168.209.162' current state is 'error' - retrying up to another 1646 times, sleeping for a second
| + '[' error '!=' finished ']'
| + echo 'Failed to install Proxom VM '\''162'\'' (IP '\''192.168.209.162'\'')'
[1] For our NGCP based installations we use the ngcpstatus boot option,
where its status_wait trap kicks in and avoids premature exit of
deployment status server. But e.g. our non-NGCP systems don't use that
boot option and with this change we could get rid of the status_wait
overall.
Change-Id: Ibaa799358caedf31c64c37b48e3c5e889808086a
Packages like 'firmware-linux', 'firmware-linux-nonfree',
'firmware-misc-nonfree' and further 'firmware-*' got moved from non-free
to the new non-free-firmware component/repository (related to
https://www.debian.org/vote/2022/vote_003).
grml-live v0.43.0 provides supports for this new component, so let's
make sure we have proper support for firmware related packages by
updating to the corresponding grml-live version.
Change-Id: I4704e8be051ab6b5496021f07f42208b34963739
Use system-tools' ngcp-initialize-udev-rules-net script to
deploy the /etc/udev/rules.d/70-persistent-net.rules, no need
to maintain code at multiple places.
Change-Id: I81925262a8c687aa9976cbc1113568989fa53281
When building our Debian boxes for buster, bullseye + bookworm (via
daily-build-matrix-debian-boxes Jenkins job), we get broken networking,
so e.g. `vagrant up debian-bookworm doesn't work.
This is caused by /etc/network/interfaces (using e.g. "neth0", being our
naming schema which we use in NGCP, as adjusted by the deployment
script) not matching the actual system network devices (like enp0s3).
TL;DR: no behavior change for NGCP systems, only when building non-NGCP
systems then enable net.ifnames=0 (via set_custom_grub_boot_options),
but do *not* generate /etc/udev/rules.d/70-persistent-net.rules (via
invoke generate_udev_network_rules) nor rename eth*->neth* in
/etc/network/interfaces.
More verbose version:
* rename the "eth*" networking interfaces into "neth*" in
/etc/network/interfaces only when running in ngcp-installer mode
(this is the behavior we rely on in NGCP, but it doesn't matter
for plain Debian systems)
* generate /etc/udev/rules.d/70-persistent-net.rules only when running
in ngcp-installer mode. While our jenkins-configs.git's
jobs/daily-build/scripts/vm_clean-fs.sh removes the file anyways (for
the VM use case), between the initial deployment run and the next reboot
the configuration inside the PVE VM still applies, so we end up with
an existing /etc/udev/rules.d/70-persistent-net.rules, referring to
neth0, while our /etc/network/interfaces configures eth0 instead.
* when *not* running in ngcp-installer mode, enable net.ifnames=0 usage
in GRUB to disable persistent network interface naming. FTR, this
change is *not* needed for NGCP, as on NGCP systems we use
/etc/udev/rules.d/70-persistent-net.rules, generated by
ngcp-system-tools' ngcp-initialize-udev-rules-net script also in VM
use case
This is a fixup for a change in git commit a50903a30c (see also commit
message of git commit ab62171), that should have been adjusted for
ngcp-installer-only mode instead.
Change-Id: I6d0021dbdc2c1587127f0e115c6ff9844460a761
The public name servers resolve deb.sipwise.com to our public OVH IP
address 164.132.119.186, while internally we want to use its cname
haproxy.mgm.sipwise.com. This only works with using our internal
nameservers (like 192.168.212.30 and 192.168.88.20).
Default to 192.168.212.30, so deployments work as expected, otherwise
we're failing during deployment with:
| Err:5 https://deb.sipwise.com/autobuild release-trunk-bookworm InRelease
| 403 Forbidden [IP: 164.132.119.186 443]
While at it also update the ip=... kernel option, to use
168.192.91.XX/24 by default, and also use a FQDN for the hostname (since
that's our current policy for puppet hostname/certificates).
Change-Id: I1ce6541f7a31baa437e679b67056bb7851b1b33d
Relevant changes:
* GRMLBASE/39-modprobe: avoid usage of /lib/modprobe.d/50-nfs.conf
* GRMLBASE/39-modprobe: do not expect all files in /etc/modprobe.d to be used
This gives us working netboot images and avoids sysctl errors during bootup,
if nfs-kernel-server should be present on the ISO.
Change-Id: I0012199658c186b69c45ac51bc249ce75b8d81ce
If the date of the running system isn't appropriate enough, then apt
runs might fail with somehint like:
| E: Release file for https://deb/sipwise/com/spce/mr10.5.2/dists/bullseye/InRelease is not valid yet (invalid for another 6h 19min 2s)
So let's try to sync date/time of the system via NTP. Given that chrony
is a small (only 650 kB disk space) and secure replacement for ntp,
let's ship chrony with the Grml deployment ISO (and fall back to ntp
usage in deployment script if chrony shouldn't be available).
Also, if the system is configured to read the RTC time in the local time
zone, this is known as another source of problems, so let's make sure to
use the RTC in UTC.
Change-Id: I747665d1cee3b6f835c62812157d0203bcfa96e2
For deploying Debian/bookworm (see MT#55524), we'd like to have an
updated Grml ISO. With such a Debian/bookworm based live system, we can
still deploy older target systems (like Debian/bullseye).
Relevant changes:
1) Ad jo as new build-dependency, to generate build information in
conf/buildinfo.json (new dependency of grml-live)
2) Always include ca-certificates, as this is required with more recent
mmdebstrap versions (>=0.8.0), when using apt repositories with
https, otherwise bootstrapping Debian fails.
3) Update to latest stable grml-live version v0.42.0, which:
a) added support for "bookworm" as suite name
cff66073a7
b) provides corresponding templates for memtest support:
c01a86b3fc
c) and a workaround for a kmod/initramfs-tools issue with PXE/NFS boot:
ea1e5ea330
4) Update memtest86+ to v6.00-1 as present in Debian/bookworm and
add corresponding UEFI support (based on grml-live's upstream change,
though as we don't support i386, dropped the 32bit related bits)
Change-Id: I327c0e25c28f46e097212ef4329d75fc8d34767c
We build the pre-loaded library targeting a specific Debian release,
which might be different (and newer) to the release Grml was built for.
This can cause missing versioned symbols (and a loading failure) if the
libc in the outer system is older than the inner system.
Change-Id: I84f4f307863e534fe0fff85274ae1d5db809012c
Git commit 6661b04af0 broke all our bullseye based builds
(debian, sipwise + docker), see
https://jenkins.mgm.sipwise.com/view/All/job/daily-build-matrix-debian-boxes/
For plain Debian installations we don't have SP_VERSION available,
so default to what was used before supporting trunk-weekly next
to trunk.
Change-Id: I61958f0c67d165d2f6dcb059fe4991ed24a328c9
We want to be able to track down any left-behind tmp files,
so ensure we're creating them with according file names.
Change-Id: I4eb44047f2eb86ba9f0a8aeeb8d6555290f60c00
It's needed for support of spN nodes.
Sort options in deployment.sh.
Remove unused boot options ngcpnonwrecfg and ngcpfillcache.
Change-Id: I300e533c15b71d65e768ca2ed4b3a73eb7ec6954
Merge all options parsing to single point.
Move options parsing to the top of the script.
Parse boot options first then cmd options if they exist.
Simplify some checks.
Remove unused options.
Change-Id: Ibcb099d9bb2ba26ffed9904c8e5065b392ecb78a
The logic to detect disks via /proc/partitions didn't cover NVMe disks,
as the regex '[a-z]$' fails for the "nvme0n1" pattern:
| % cat /proc/partitions
| major minor #blocks name
|
| 259 0 500107608 nvme0n1
| 259 1 524288 nvme0n1p1
| 259 2 499582279 nvme0n1p2
| [...]
| 8 0 384638976 sda
| 8 1 384606208 sda1
Instead, let's use lsblk to detect present disks, which works
fine for all kinds of disks, incl. NVMe devices.
Change-Id: I586877da8b4fadf3d05b4e6c8e88bfdeae6d7f15
Sort default values.
Rework cmd parameters parsing - remove some reassign, reformat
to be more clear, etc.
Add some default options CROLE, EADDR, EXTERNAL_NETMASK, ROLE.
Change-Id: I287facafeb53dc5390517424935c8a50932246dc
Sipwise Jenkins Builder
Michael Prokop
Guillem Jover
Mykola Malkov
Victor Seva
Volodymyr Fedorov