A while back, we changed config_site.h to set PJ_LOG_MAX_LEVEL = 6.
This allowed us to control the log level better from inside Asterisk.
An unfortunate side effect of this was that the pjsua binary and
python bindings were also compiled with log level set to 6 so whenever
a testsuite test that uses pjsua runs, it spits out 6795 lines of
debug in an instant even before the test starts. I believe this
overruns the Jenkins capture buffer and prevents the test from
properly terminating. In turn, this results in the testsuite just
hanging until the job is killed. It's more frequent on the higher
end agents because they can spit out the messages faster.
Unfortunately, the messages are all spit out before we have control
of the python pj.Lib instance where we can set logging levels so the
only alternative was to actually compile pjsua and _pjsua.so with an
overridden PJ_LOG_MAX_LEVEL. Although defining a lower max level was
done in the Makefile, the define in config_site.h had to be wrapped
with "#ifndef" so the change would take effect.
Change-Id: I2af9e7d48dde1927279c586c9c725d868fe6f3ff
The CHANNEL() dialplan function implementation for PJSIP allows
querying of PJSIP specific information. This used the channel
passed in to get the PJSIP session and associated information.
It is possible for this channel to be masqueraded and end
up as a different channel type by the time the information
request is actually acted upon.
This change retrieves the PJSIP session safely and accesses
data from it (including channel). This provides a guarantee
that the session and channel will not be altered when the
request is being acted upon.
ASTERISK-26673
Change-Id: I335e12b89e1820cafdd92b3e7526b8ba649eb7e6
refer_incoming_refer_request needed to look for the "r" header as well
as the "Refer-To" header.
ASTERISK-26655 #close
patches:
refer_compact_fix.diff submitted by JoshE (license 6075)
Change-Id: I610410a99b02427ea5db887aeb454d5f12c2259f
native_rtp_bridge_compatible() didn't lock the bridge channels before
checking the channels for native bridging ability. As a result, one of
the channel's native format capabilities structure got replaced out from
under the native bridge check. Use of a stale pointer to freed memory
causes bad things to happen.
MALLOC_DEBUG, DO_CRASH, and the
tests/channels/pjsip/transfers/blind_transfer/caller_direct_media
testsuite test caught this.
* Add missing channel locking in native_rtp_bridge_compatible().
Change-Id: If25fdb3ac8e85563c4857fb8216b3d9dc3d0fa53
In some cases member is added to pending_members, and the channel
is hung up before any extension state change. So the member would
stay in pending_members forever. So when we call do_hang, we
should also remove member from pending.
ASTERISK-26621 #close
Change-Id: Iae476b5c06481db18ebe0fa594b3e80fdc9a7d54
There were just too many issues in various environments with
multi threaded building of pjproject. It doesn't really speed
things up anyway since asterisk is already being compiled in
parallel.
Change-Id: Ie5648fb91bb89b4224b6bf43a0daa1af793c4ce1
In some situations TCP threads may become frozen. This creates the
possibility that Asterisk could segfault if they become unfrozen after
chan_sip has been dlclose'd. This reorders the unload_module process to
allow abort if threads do not exit within 5 seconds.
High level order as follows:
1) Unregister from the core to stop new requests.
2) Signal threads to stop
3) Clear config based tables (but do not free the table itself).
4) Verify that threads have shutdown, cancel unload if not.
5) Clean all remaining resources.
ASTERISK-26586
Change-Id: Ie23692041d838fbd35ece61868f4c640960ff882
The AC_ARG_WITH macro's shell variable is withval; not enableval. Purely
coincidentally, the option would work when --enable-dev-mode is given.
Also fixed a portability problem with bootstrap.sh, since -printf is not
a portable option for find.
Change-Id: I0f0e5b1a934b5af5737713834361e9c95b96b376
When a sorcery user calls ast_sorcery_delete on an object that
may have already expired from the cache, res_sorcery_memory_cache
spits out an ERROR. Since this can happen frequently and validly when
an inbound registration expires after the cache entry expired, the
errors are unnecessary and misleading. Changed to a debug/1.
Change-Id: Idf3a67038c16e3da814cf612ff4d6d18ad29ecd7
If a tarball is corrupted during download, the makefile will attempt to
download it again. If the tarball somehow gets corrupted after it's
downloaded however, the makefile was just failing. We now
retry the download.
ASTERISK-26653 #close
Change-Id: I1b24d454852d80186f60c5a65dc4624ea8a1c359
Consider reviewing the expression of the 'A = B != C' kind.
The expression is calculated as following: 'A = (B != C)'
Change-Id: Ibaa637dfda47d51a20e26069d3103e05ce80003d
RFC says SIP headers look like:
HCOLON = *( SP / HTAB ) ":" SWS
SWS = [LWS] ; sep whitespace
LWS = [*WSP CRLF] 1*WSP ; linear whitespace
WSP = SP / HTAB ; from rfc2234
chan_sip implemented this:
HCOLON = *( LOWCTL / SP ) ":" SWS
LOWCTL = %x00-1F ; CTL without DEL
This discrepancy meant that SIP proxies in front of Asterisk with
chan_sip could pass on unknown headers with \x00-\x1F in them, which
would be treated by Asterisk as a different (known) header. For
example, the "To\x01:" header would gladly be forwarded by some proxies
as irrelevant, but chan_sip would treat it as the relevant "To:" header.
Those relying on a SIP proxy to scrub certain headers could mistakenly
get unexpected and unvalidated data fed to Asterisk.
This change fixes so chan_sip only considers SP/HTAB as valid tokens
before the colon, making it agree on the headers with other speakers of
SIP.
ASTERISK-26433 #close
AST-2016-009
Change-Id: I78086fbc524ac733b8f7f78cb423c91075fd489b
When an opus offer or answer was received that contained an
fmtp line with spaces between the attributes the module would
fail to properly parse it and crash due to recursion.
This change makes the module handle the space properly and
also removes the recursion requirement.
ASTERISK-26579
Change-Id: I01f53e5d9fa9f1925a7365f8d25071b5b3ac2dc3
The PJSIPShowRegistrationsInbound AMI command was just dumping out
all AORs which was pretty useless and resource heavy since it had
to get all endpoints, then all aors for each endpoint, then all
contacts for each aor.
PJSIPShowRegistrationInboundContactStatuses sends ContactStatusDetail
events which meets the intended purpose of the other command and has
significantly less overhead. Also, some additional fields that were
added to Contact since the original creation of the ContactStatusDetail
event have been added to the end of the event.
For compatibility purposes, PJSIPShowRegistrationsInbound is left
intact.
ASTERISK-26644 #close
Change-Id: I326f12c9ecb52bf37ba03f0748749de4da01490a
Occasionally SIP message transactions are not found when they should be.
In the particular case an incoming INVITE transaction is CANCELed but the
INVITE transaction cannot be found so a 481 response is returned for the
CANCEL. The problematic calls have a '_' character in the Via branch
parameter.
The problem is in the pjproject PJ_HASH_USE_OWN_TOLOWER feature's code.
The problem with the "own tolower" code is that it does not calculate the
same hash value as when the pj_tolower() function is used. The "own
tolower" code will erroneously modify the ASCII characters '@', '[', '\\',
']', '^', and '_'. Calls to pj_hash_calc_tolower() can use the
PJ_HASH_USE_OWN_TOLOWER substitute algorithm when enabled. Calls to
pj_hash_get_lower(), pj_hash_set_lower(), and pj_hash_set_np_lower() call
find_entry() which never uses the PJ_HASH_USE_OWN_TOLOWER algorithm. As a
result you may not be able to find a hash tabled entry because the
calculated hash values would differ.
* Simply disable PJ_HASH_USE_OWN_TOLOWER.
ASTERISK-26490 #close
Change-Id: If89bfdb5f301b8b685881a9a2a6e0c3c5af32253
Added back in a -g3, and an -O3 when DONT_OPTIMIZE is not set, to
the CFLAGS. Not sure how they went missing.
Also fixed an uninstall problem where we weren't removing the
symlink from libasteriskpj.so.2 to libasteriskpj.so. While I was
there, I fixed it for libasteriskssl as well.
Change-Id: I9e00873b1e9082d05b5549d974534b48a2142556
Increasing the testsuite shutdown timeout before forcibly killing
Asterisk allowed more events to be sent out. Some tests failed as
a result. The tests/channels/pjsip/statsd/registrations failed
because we now get the statsd events that a comment in the test
configuration stated couldn't be intercepted. Unfortunately, we
get a variable number of events because of internal status state
transition races generating redundant statsd events.
We were reporting redundant statsd PJSIP.registrations.state changes
for internal state changes that equated to the same thing publicly.
* Made update_client_state_status() filter out redundant statsd
updates.
ASTERISK-26527
Change-Id: If851c7d514bb530d9226e4941ba97dcf52000646
George Joseph
Joshua Colp
Richard Mudgett
zuul
Martin Tomec
Corey Farrell
David M. Lee
Badalyan Vyacheslav
Kevin Harwell
Walter Doekes