When channel format changes occurred as a result of an RTP
re-negotiation the bridge was not informed this had happened.
As a result the bridge technology was not re-evaluated and the
channel may have been in a bridge technology that was incompatible
with its formats. The bridge is now unbridged and the technology
re-evaluated when this occurs.
The chan_pjsip module also allowed asymmetric codecs for sending
and receiving. This did not work with all devices and caused one
way audio problems. The default has been changed to NOT do this
but to match the sending codec to the receiving codec. For users
who want asymmetric codecs an option has been added, asymmetric_rtp_codec,
which will return chan_pjsip to the previous behavior.
The codecs returned by the chan_pjsip module when queried by
the bridge_native_rtp module were also not reflective of the
actual negotiated codecs. The nativeformats are now returned as
they reflect the actual negotiated codecs.
ASTERISK-26423 #close
Change-Id: I6ec88c6e3912f52c334f1a26983ccb8f267020dc
* CFLAGS is now properly set when using older gcc.
* All third-party pjproject targets have been removed. This fixes
an issue with older libsrtp in some distros.
* Manually removing the source directory now causes a rebuild.
* EXTERNALS_CACHE_DIR is now properly checked.
* Whitespace fixes.
Change-Id: I98fec6847efc5602a9f41cb95096fd660a49fa60
This change adds support for dual stack automatically. No
configuration is required and the IP address and version
in the SIP messages and SDP will be automatically changed
based on the transport over which the message is being
sent. RTP usage has also been changed to listen on both
IPv4 and IPv6 simultaneously to allow media to flow, and
to allow ICE support on both simultaneously. This also
allows failover between IPv6 and IPv4 to work as expected.
ASTERISK-26309 #close
Change-Id: I235a421d8f9a326606d861b449fa6fe3a030572d
ARI and AMI allow for an explicit channel ID to be specified
when originating channels. Unfortunately, there is nothing in
place to prevent someone from using the same ID for multiple
channels. Further complicating things, adding ID validation to channel
allocation makes it impossible for ARI to discern why channel allocation
failed, resulting in a vague error code being returned.
The fix for this is to institute a new method for channel errors to be
discerned. The method mirrors errno, in that when an error occurs, the
caller can consult the channel errno value to determine what the error
was. This initial iteration of the feature only introduces "unknown" and
"channel ID exists" errors. However, it's possible to add more errors as
needed.
ARI uses this feature to determine why channel allocation failed and can
return a 409 error during origination to show that a channel with the
given ID already exists.
ASTERISK-26421
Change-Id: Ibba7ae68842dab6df0c2e9c45559208bc89d3d06
Introduces ice_blacklist configuration in rtp.conf. Subnets listed in the
form ice_blacklist = <subnet spec>, e.g. ice_blacklist =
192.168.1.0/255.255.255.0, are excluded from ICE host, srflx and relay
discovery. This is useful for optimizing the ICE process where a system
has multiple host address ranges and/or physical interfaces and certain
of them are not expected to be used for RTP. Multiple ice_blacklist
configuration lines may be used. If left unconfigured, all discovered
host addresses are used, as per previous behavior.
Documention in rtp.conf.sample.
ASTERISK-26418 #close
Change-Id: Ibee88f80d7693874fda1cceaef94a03bd86012c9
CDRs form chains. When the root of the chain is destroyed, it then
unreferences the next CDR in the chain. That CDR is destroyed, and it
then unreferences the next CDR in the chain. This repeats until the end
of the chain is reached. While this typically does not cause any sort of
problems, it is possible in strange scenarios for the CDR chain to grow
way longer than expected. In such a scenario, the destruction pattern
can result in a stack overflow.
This patch fixes the problem by switching from a recursive pattern to an
iterative pattern for destruction. When the root CDR is destroyed, it is
responsible for iterating over the rest of the CDRs and unreferencing
each one. Other CDRs in the chain, since they are not the root, will
simply destroy themselves and be done. This causes the stack depth not
to increase.
ASTERISK-26421 #close
Reported by Andrew Nagy
Change-Id: I3ca90c2b8051f3b7ead2e0e43f60d2c18fb204b8
Since Asterisk 1.8, the command "core set debug" on the command-line interface
asks not for a file (.c) but a module name. This change shows modules (.so) on
the auto-completion via a tabulator or the question mark. Now, when you
partially type a module name, TAB or ?, you get the correct candidiates.
ASTERISK-26480
Change-Id: I1213f1dd409bd4ff8de08ad80cb0c73cafb1bae0
configuire.ac was only checking for the existence of pkg-config
and not the gtk2 package itself. Now it calls AST_PKG_CONFIG_CHECK
for gtk+-2.0.
ASTERISK-26356 #close
Change-Id: I8079d515d6ea99f9ab320a7eaa71c2aaa101ccd5
Addresses crashes when an attempt is made to operate on an SSL socket
after the socket has been closed.
ASTERISK-26477 #close
Change-Id: I421305b357558b4f9e690210dc0f4831ef4b3002
This patch adds the Asterisk EID field to all outgoing ARI events.
Because this field should be added to all events as they are
transmitted, it is appended to the JSON message just prior to it being
handed off to the application message handler. This makes it somewhat
resilient to both new events being added to ARI, as well as other
potential event transport mechanisms.
ASTERISK-26470 #close
Change-Id: Ieff0ecc24464e83f3f44e9c3e7bd9a5d70b87a1d
ast_set_default_eid was searching for ethX, emX, enoX, ensX and even
pciD#U interface names. While this was a good attempt, it wasn't
inclusive enough to capture interfaces like enp6s0 or ens6d1, etc.
Rather than relying on interface names, we now simply find the first
interface returned by the OS that has a hardware address and that
address isn't all 0x00 or all 0xff. The code IS different for BSD,
Solaris and Linux based on what method is available for enumerating
interfaces.
Tested on:
FreeBSD9
CentOS6
Ubuntu14
Fedora24
I was unable to test on Solaris at this time but the code for Solaris
is used elsewhere at Digium.
Change-Id: Iaa6db87ca78a9a375e47d70e043ae08c1448cb72
Previously, the settings videosupport=always and videosupport=yes behaved
identically and unconditionally caused a video offer to be sent in the SDP on
an outgoing call. This was a regression introduced with commit
5a1d90e1fb in Asterisk 1.6.1.
This commit restores correct behavior: videosupport=always causes a video offer
to be sent unconditionally, while videosupport=yes will only offer video on an
outbound channel if the incoming channel it is bridged to also supports video.
That way, the device receiving the outgoing call can display the correct user
interface elements for audio or video and will not unnecessarily show a blank
video window on an audio-only call.
ASTERISK-17470 #close
Change-Id: I782f4409d436114dbc97061c3570c0cd24f7c3ae
When using Asterisk Realtime Architecture, empty fields are skipped and the
default values are used. If the "context" parameter in queue was set and then
cleared from the database, the old value remains in memory and it continues
to be used. This change initialize the "context" parameter with an empty value,
allowing clearing the parameter.
ASTERISK-26462 #close
Change-Id: I64be73d5044ce38dd02408bd0e53de965ef65905
Previously when testing I had a preexisting makeopts in ASTTOPDIR. The
ordering of configure.ac causes --with-externals-cache to be processed
after third-party configure. In cases where the Asterisk clone is
cleaned it would cause pjproject to be downloaded to /tmp. This
moves processing of the externals cache and sounds cache to happen
before third-party configure.
This also addresses a possible issue with the third-party Makefile. If
TMPDIR is set by the environment it would override the path given to
--with-externals-cache.
ASTERISK-26416
Change-Id: Ifab7f35bfcd5a31a31a3a4353cc26a68c8c6592d
Added needed UTF-8 checks before constructing json objects in various
files for strings obtained outside the system. In this case string values
from a channel driver's peer and not from the user setting channel
variables.
* aoc.c: Fixed type mismatch in s_to_json() for time and granularity json
object construction.
ASTERISK-26466
Reported by: Richard Mudgett
Change-Id: Iac2d867fa598daba5c5dbc619b5464625a7f2096
* Updated unit test as ast_json_name_number() is now NULL tolerant.
ASTERISK-26466 #close
Reported by: Richard Mudgett
Change-Id: I7d4e14194f8f81f24a1dc34d1b8602c0950265a6
Since the json library does not make the check function public we
recreate/copy the function in our interface module.
ASTERISK-26466
Reported by: Richard Mudgett
Change-Id: I36d3d750b6f5f1a110bc69ea92b435ecdeeb2a99
* In s_to_json() removed unnecessary ast_json_ref() to ast_json_null()
when creating the type json object. The ref is a noop.
Change-Id: I2be8b836876fc2e34a27c161f8b1c53b58a3889a
The pause reason is not always cleared when it should be cleared.
* Made set_queue_member_pause() always clear pause reason if not pausing
with a reason string.
Change-Id: I993dad19626ec017478a230e980989438b778c53
Unlike any of the other database drivers, res_config_mysql checks that
the table definition matches the requirements for every insert and
update statement. Since all requirements are forced to 'char', any
column that isn't a char, like ps_contacts' expiration_time,
qualify_timeout, etc., will throw a warning. It's kinda harmless but
very misleading. Since no other driver does those checks on insert
or update, they've been removed from res_config_mysql. Also, all
the logic that actually attempted to ALTER the table to fix the issue
has been removed. With the move to alembic, the auto-alter
functionality is not only unnecessary, it's also dangerous.
The other issue is that res_config_mysql calls the mysql_insert_id
function inside store_mysql. Presumably the intention was to return
the number of rows inserted DESPITE A NOTE IN THE CODE THAT THE VALUE
IS NON_PORTABLE AND MAY CHANGE. That value is then returned to
config realtime as the number of rows inserted. Guess what? The value
changed. It now only returns the number of rows inserted if there's an
auto increment column on the table, which ps_contacts doesn't have.
Otherwise it returns 0. So now, the insert worked but we tell config
realtime and sorcery that no rows were inserted. That call to
mysql_insert_id was removed and we now always return 1 if the insert
succeeded. We're only inserting 1 row at a time anyway. If the insert
fails, we still return -1.
ASTERISK-26362 #close
Reported-by: Carlos Chavez
Change-Id: I83ce633efdb477b03c8399946994ee16fefceaf4
When T.38 gets rejected and G711 failback occurs there is a period of
time where neither AST_FAX_TECH_T38 nor AST_FAX_TECH_AUDIO is set,
leading to a crash.
Change-Id: Icc3f457b2292d48a9d7843dac0028347420cc982
Joshua Colp
zuul
Pascal Cadotte Michaud
George Joseph
Mark Michelson
snuffy
Michael Walton
Alexander Traud
Tzafrir Cohen
Moises Silva
Matt Jordan
Michael Kuron
Leandro Dardini
Corey Farrell
Richard Mudgett
Torrey Searle
Rodrigo Ramírez Norambuena