BlindTransfer redirects all channels currently bridged to the
caller channel to the specified destination.
This application can be useful with Custom Dynamic Features.
For example to make blind transfer to a predefined number.
features.conf
;;;
[applicationmap]
my_blindxfer => *6,self,GoSub,"my_blindxfer,s,1",default
;;;
extensions.conf
;;;
[globals]
DYNAMIC_FEATURES=my_blindxfer
[my_blindxfer]
exten => s,1,BlindTransfer(1234567890,default)
same => n,Return()
;;;
This application also can be used to completly redefine Blind transfer
feature using dialplan. For example:
features.conf
;;;
[featuremap]
blindxfer =>
[applicationmap]
custom_blindxfer => ##,self,GoSub,"custom_blindxfer,s,1",default
;;;
extensions.conf
;;;
[globals]
DYNAMIC_FEATURES=custom_blindxfer
[custom_blindxfer]
exten => s,1,
same => n,Playback(pbx-transfer)
same => n,Read(dest,dial,10,i,3,3)
same => n,BlindTransfer(${dest},default)
same => n,Return()
;;;
Change-Id: I9d55e7f69ccfd4472dec00d62771d6de8803215a
Various fixes for issues caught by gcc 9. Mostly snprintf
trying to copy to a buffer potentially too small.
ASTERISK-28412
Change-Id: I9e85a60f3c81d46df16cfdd1c329ce63432cf32e
This change fixes two bugs which both resulted in the packet loss
count exceeding 65,000.
The first issue is that the sequence number check to determine if
cycling had occurred was using the wrong variable resulting in the
check never seeing that cycling has occurred, throwing off the
packet loss calculation. It now uses the correct variable.
The second issue is that the packet loss calculation assumed that
the received number of packets in an interval could never exceed
the expected number. In practice this isn't true due to delayed
or retransmitted packets. The expected will now be updated to
the received number if the received exceeds it.
ASTERISK-28379
Change-Id: If888ebc194ab69ac3194113a808c414b014ce0f6
When multiple endpoints try to register close together using the same
AOR with qualify_frequency set, one contact would qualify immediately
while the other contacts would have to wait out the duration of the
timer before being able to qualify. Changing the conditional to check
the contact container count for a non-zero value allows all contacts to
qualify immediately.
Change-Id: I79478118ee7e0d6e76af7c354d66684220db9415
Added a conversion for umax (largest maximum sized integer allowed). Adjusted
the other current conversion functions (uint and ulong) to be derivatives of
the umax conversion since they are simply subsets of umax.
Also made the negative check move the pointer on spaces since strtoumax does it
anyways.
Change-Id: I56c2ef2629d49b524c8df58af12951c181f81f08
When we use early bridge with create and dial from stasis using Local channel
and the dialplan does not any entry the it is returned from core_local.c with
No such extension .
In such case asterisk locks up till the channel is not hangup with the error
Exceptionally long voice queue length
* Found that in such case app_control_dial fails on ast_call method and
return -1
* Since it is called from stasis_app_send_command_async and return -1 does
not cause resources to be freed and since no PBX exist it is not able to
read from channel causing exceptionally long queue
* After putting this code found that the channel was releasing immediately
and resources were freed.
ASTERISK-28399
Reported by: Abhay Gupta
Tested by: Abhay Gupta
Change-Id: I0a55c923fc6995559f808d63b9488762b4489318
When the gcc version is >= 8.2.1, we were already setting the
--fno-partial-inlining flag for Asterisk source files to get around
a gcc bug but we weren't passing the flag down to the bundled
builds of pjproject and jansson.
ASTERISK-28392
Change-Id: I99ede9bc35408ecd096f7d5369e8192d3dc75704
Updated ast_sip_create_rdata_with_contact and registrar_find_contact
to check the return from pjsip_parse_uri before attempting to
use the uri returned.
ASTERISK-28402
Reported-by: Ross Beer
Change-Id: I9810b3b163c45ed5a56ec743586e5ce107f13ba7
The dial bridge is meant to hold channels which have been created
and dialed in stasis. It handles the frames coming from them and raises
the appropriate events.
It was possible for the code to mistakenly place calls which came
from the dialplan into the dial bridge if they were not in an
answered state. These channels are not outgoing channels and
should not be placed into the dial bridge.
The code now checks to ensure that only stasis created channels are
placed into the dial bridge by checking that a PBX does not exist
on the channel.
ASTERISK-27756
Change-Id: Ideee69ff06c9a0b31f7ed61165f5c055f51d21b6
After a bridge has been deleted the stasis control will depart
the channel and might attempt to re-add it to the dial bridge.
The later can fail and this can lead to a situation that the stasis
control is unlinked but the after_bridge_cb_failed cb is executed trying
to access a dangling control object.
Fix it by calling the after_cb's before bridge_channel_impart_signal.
ASTERISK-26718
Change-Id: Ib4e8f70d7a21bd54afe3cb51cc6717ef7c355496
When producing a combined REMB value the normal behavior
is to have a REMB value which is unique for each sender
based on all of their receivers. This can result in one
sender having low bitrate while all the rest are high.
This change adds "all" variants which produces a bridge
level REMB value instead. All REMB reports are combined
together into a single REMB value that is the same for
each sender.
ASTERISK-28401
Change-Id: I883e6cc26003b497c8180b346111c79a131ba88c
The transport-cc draft is a mechanism by which additional information
about packet reception can be provided to the sender of packets so
they can do sender side bandwidth estimation. This is accomplished
by having a transport specific sequence number and an RTCP feedback
message. This change implements this in the receiver direction.
For each received RTP packet where transport-cc is negotiated we store
the time at which the RTP packet was received and its sequence number.
At a 1 second interval we go through all packets in that period of time
and use the stored time of each in comparison to its preceding packet to
calculate its delta. This delta information is placed in the RTCP
feedback message, along with indicators for any packets which were not
received.
The browser then uses this information to better estimate available
bandwidth and adjust accordingly. This may result in it lowering the
available send bandwidth or adjusting how "bursty" it can be.
ASTERISK-28400
Change-Id: I654a2cff5bd5554ab94457a14f70adb71f574afc
When compiling in dev mode, stasis statistics are enabled and can cause
a crash at shutdown due to the following:
- Containers are freed
- Topics and subscriptions remain
- When those topics and subscriptions are deallocated, they go to do
things with the container
This changes the containers to global ao2 objects, and whenever needed
in the code, a reference must be obtained and checked before any
operations can be done.
ASTERISK-28353 #close
Change-Id: Ie7d5e907fcfcb4d65bd36d5e4eb923126fde8d33
Added RINGTIME, RINGTIME_MS, PROGRESSTIME, PROGRESSTIME_MS variables filled
at the earliest received PROGRESS or RINGING.
Added millisecond versions of DIALEDTIME and ANSWEREDTIME.
Added millisecond versions of ast_channel_get_up_time and
ast_channel_get_duration in channel.c.
ASTERISK-28363
Change-Id: If95f1a7d8c4acbac740037de0c6e3109ff6620b1
There is enough MWI functionality to warrant it having its own 'c' and header
files. This patch moves all current core MWI data structures, and functions
into the following files:
main/mwi.h
main/mwi.c
Note, code was simply moved, and not modified. However, this patch is also in
preparation for core MWI changes, and additions to come.
Change-Id: I9dde8bfae1e7ec254fa63166e090f77e4d3097e0
main/json.c: Added app_name, app_data to channel type
res/res_ari: Added ARI resource /ari/channels/{channelId}/rtp_statistics
res/res_ari: Added timestamp as a requirement for all ARI events
Change-Id: I6363f2a3e757cfd59b2ee5d056388ec47659a0c9
Make compiler check use the output of the actual compiler being
used as reported by the CC variable, instead of unconditionally
running the "gcc" binary. Also only run the check if the compiler
is gcc or a cross-compile gcc.
ASTERISK-28374
Change-Id: Icaacf6d93686ad21076878aa1504a23b4fc9d0f4
We changed the validation of autocomplete parameter in the "indications
remove" command to avoid continue the execution of the command after
asking for autocomplete out of range parameters.
ASTERISK-28391
Reported by: lmendes86
Change-Id: I92b24131fd02f2e3c7fec966eea6f7a663310d40
Added a new PJSIP global setting called norefersub.
Default is true to keep support working as before.
res_pjsip_refer: Configures PJSIP norefersub capability accordingly.
Checks the PJSIP global setting value.
If it is true (default) it adds the norefersub capability to PJSIP.
If it is false (disabled) it does not add the norefersub capability
to PJSIP.
This is useful for Cisco switches that do not follow RFC4488.
ASTERISK-28375 #close
Reported-by: Dan Cropp
Change-Id: I0b1c28ebc905d881f4a16e752715487a688b30e9
One of the downaides of having things like test configuration
in the git repo is that it can't be changed at runtime. You have
to create a review for the changes and merge it mefore it will
take effect.
This review moves the data currently held in
tests/CI/periodic-dailyTestGroups.json and
tests/CI/gateTestGroups.json into a Jenkins Config File attached
to the job definitions. This allows us to alter it from the
Jenkins UI at runtime. The original files stay in the repo
as documentation.
Change-Id: I14b9702f6285ce1fb2420287ba0e7d3b59109763
Because the per-mailbox options are the last thing on a line, don't look
for or stomp on any subsequent commas.
ASTERISK-27935 #close
Reported by: Sébastien Duthil
Change-Id: I07b2eb4a33c303d0c7114d5b906f8c067c60a153
Alexei Gradinari
Joshua Colp
Friendly Automation
George Joseph
Ben Ford
Kevin Harwell
agupta
Holger Hans Peter Freyther
Antoni Goldstein
Guido Falsi
Lucas Mendes
Dan Cropp
Sean Bright