Previously, Asterisk did not tell its bundled PJProject about this configure
parameter. Therefore, PJProject used the platform provided OpenSSL always.
ASTERISK-27880
Change-Id: Iea545aec854dd0e2c061c69bb118a76ce56c5dc6
Support has been added for receiving a NACK request and handling it.
Now, Asterisk can detect when a NACK request should be sent and knows
how to construct one based on the packets we've received from the remote
end. A buffer has been added that will store out of order packets until
we receive the packet we are expecting. Then, these packets are handled
like normal and frames are queued to the core like normal. Asterisk
knows which packets to request in the NACK request using a vector
which stores the sequence numbers of the packets we are currently missing.
If a missing packet is received, cycle through the buffer until we reach
another packet we have not received yet. If the buffer reaches a certain
size, send a NACK request. If the buffer reaches its max size, queue all
frames to the core and wipe the buffer and vector.
According to RFC3711, the NACK request must be sent out in a compound
packet. All compound packets must start with a sender or receiver
report, so some work was done to refactor the current sender / receiver
code to allow it to be used without having to also include sdes
information and automatically send the report.
Also added additional functionality to ast_data_buffer, along with some
testing.
For more information, refer to the wiki page:
https://wiki.asterisk.org/wiki/display/AST/WebRTC+User+Experience+Improvements
ASTERISK-27810 #close
Change-Id: Idab644b08a1593659c92cda64132ccc203fe991d
A problem I've seen countless times is a global or system section
for PJSIP not getting applied. This is inevitably the result of
the "type=" line missing. This change alleviates that problem.
The ability to specify an explicit section name has been
added to res_sorcery_config. If the configured section
name matches this and there are no unknown things configured
the section is taken as being for the given type.
Both the PJSIP "global" and "system" types now support this
so you can just name your section "global" or "system" and it
will be matched and used, even without a "type=" line.
ASTERISK-27972
Change-Id: Ie22723663c1ddd24f869af8c9b4c1b59e2476893
I have removed the STATIC_BUILD option immediately as it has not
been maintained in many years and is non-functional.
ASTERISK-27965
Change-Id: I64783d017b86dba9ee3c7bcfb97e59889a3f76d7
Fixes issue where error msg
"Use of before/init after destruction"
was being printed on disabled messages
in dev mode. With this
fix if message is disabled
a warning will print.
ASTERISK-25548
Change-Id: Ie0d866d1cbc60c16dbef08bc65e99505c3c1adfa
SRTP SDES key lifetime support was added in ASTERISK_17899.
In that addition, the minimum key lifetime to be accepted was
set at the 10 hours @ 20ms/packet = 1800000 packets.
The firmware in the obi1xx ATA uses a hardcoded lifetime of
2^20 packets.
Lower the limit to 2^20 to support a wider field of clients.
ASTERISK-27967 #close
Change-Id: I81a0703c595a0c9101dfdf02300149a3cc39bf94
Asterisk patched the pjproject source to avoid crashing when pjproject
sip_msg headers are encountered with NULL vptr's, but the patch also
output error messages for some valid headers which simply did not need
to be added to the message itself, such as hidden route headers.
pjproject has since applied a similar patch to their baseline to avoid
crashes, but their version also avoids the spurious error logging.
Lets use their patch instead.
ASTERISK-27961 #close
Change-Id: I2ddbd82c8da10e0dcc9807a48089d1f3c2d6e389
* Merge the preload and load stages, use load ordering to try preload's
first. This fixes an issue where `preload=res_config_curl` would fail
unless res_curl and func_curl were also preloaded. Now it is only
required that those modules be loaded during startup: autoload or
regular load is good enough.
* The configuration option `require` and `preload-require` were only
effective if the modules failed to load. These options will now abort
Asterisk startup if required modules fail to reach the 'Running'
state.
* Missing or invalid 'module.conf' did not prevent startup. Asterisk
doesn't do anything without modules so this a fatal error.
Change-Id: Ie4176699133f0e3a823b43f90c3348677e43a5f3
Asterisk modules that use PJPROJECT services have their compiler
optimization and possibly their symbolic debug options overridden by the
PJPROJECT configure script selected settings.
* We need to filter-out any -O and -g options in PJ_CFLAGS before echoing
out the result so the PJPROJECT_INCLUDE variable does not override the
Asterisk module settings when using bundled PJPROJECT.
NOTE: This patch only has an effect when using bundled PJPROJECT.
ASTERISK-27563
Change-Id: If124169735ecf572ad1535cd43bff94cb44d5b30
When `--without-libcurl` is used PBX_CURL is never set. Set default
value 0 so the proper value is passed to menuselect.
Change-Id: I03e2842a00899cbca2dbde52bb1f6636d54bae1e
Previously, the msid "label" attribute was used to correlate
participant info but because streams could be reused, the msid
wasn't being updated correctly when someone left the bridge and
another joined.
Now, instead of looking for the msid attribute on a channel's streams,
app_confbridge sets an "SDP:LABEL" attribute on the stream which
res_pjsip_sdp_rtp looks for. If it finds it, it adds a "label"
attribute to the current sdp.
Change-Id: I6cbaa87fb59a2e0688d956e72d2d09e4ac20d5a5
Turn off the periodic sending of CRLNCRLN. Default is on (90 seconds),
which conflicts with the global section's keep_alive_interval option in
pjsip.conf.
patches:
pjsip_keep_not_alive.patch submitted by Alexander Traud (License 6520)
ASTERISK-27347
Change-Id: I6a197f56e1830d3b7e5ec70f17025840a290b057
Keep track if ICE candidates were in the SDP offer & only put them
in the corresponding SDP answer if the offer condaind ICE candidates
ASTERISK-27957 #close
Change-Id: Idf2597ee48e9a287e07aa4030bfa705430a13a92
Create tests/CI directory and add files used by Jenkins to
build and test Asterisk.
With this commit, Jenkins will run the Asterisk Unit Tests using
the Jenkinsfile at tests/CI/unittests.jenkinsfile. Bash scripts
to do the actual building and testing are also in the same directory.
Output is placed in tests/CI/output so that directory has been
added to .gitignore.
Change-Id: I9448065465e6de2b878634510ace8fd1ef378608
This commit adds a new function to res_parking.
This function, PARK_GET_CHANNEL allows the retrieval
of the channel name of the channel occupying the parking slot.
ASTERISK-22825 #close
Change-Id: Idba6ae55b8a53f734238cb3d995cedb95c0e7b74
George Joseph
Alexander Traud
Ben Ford
Joshua Colp
Chris-Savinovich
Nick French
Jenkins2
Corey Farrell
Richard Mudgett
Torrey Searle
Joshua Elson