When a call pickup is performed using and invite with replaces header
the ast_do_pickup method is attempted and a PICKUP stasis message is sent.
ASTERISK-28081 #close
Reported-by: Luit van Drongelen
Change-Id: Ieb1442027a3ce6ae55faca47bc095e53972f947a
Using the --quiet or -q option in conjonction with /dev/stdout as the output
file allow the output to be used as a valid configuration.
Given a script that generates a valid sip.conf I can pipe the output of that
script into `sip_to_pjsip.py -q /dev/stdin /dev/stdout`. This allow me to use
that piped command in my pjsip.conf using the `exec` command.
ASTERISK-28136
Change-Id: I7b0e2e90e2549f3f8e01dc96701f111b5874c88d
This patch adds new options 'trust_connected_line' and 'send_connected_line'
to the endpoint.
The option 'trust_connected_line' is to control if connected line updates
are accepted from this endpoint.
The option 'send_connected_line' is to control if connected line updates
can be sent to this endpoint.
The default value is 'yes' for both options.
Change-Id: I16af967815efd904597ec2f033337e4333d097cd
The module 'res_pjsip_notify' inefficiently makes a lot of DB requests
on CLI completion on the endpoint.
For example if there are 10k endpoints the module makes 10k requests
of these 10k records.
Even if a part of the endpoint entered
the module makes the same 10k requests and then filtered them by itself.
This patch gathers endpoints container by prefix
and adds all gathered endpoints to completion at once.
ASTERISK-28137 #close
Change-Id: Ic20024912cc77bf4d3e476c4cd853293c52b254b
Given a sip.conf with the following content:
setvar FOO=1
setvar BAR=42
I want my generated pjsip.conf to containt the following set_vars
set_var FOO=1
set_var BAR=42
in the matching endpoint section.
Change-Id: I6c822401fda4133c3b44bf31e655b4eb939d4d26
Add a new global flag to res_pjsip to allow the callerid to be used
as the username in the contact header. This allows chan_pjsip to have
the same behavour as chan_sip
ASTERISK-28087 #close
Change-Id: I9a720e058323f6862a91c62f8a8c1a4b5c087b95
Default logging was not setup correctly when there was no logger.conf.
This resulted in many expected log messages not actually getting out to
the console.
Change-Id: I542e61c03b2f630ff5327f9de5641d776c6fa70c
The 'I' option currently blocks initial CONNECTEDLINE or REDIRECTING updates
from the called parties to the caller.
This patch also blocks updates in the other direction before call is
answered.
ASTERISK-27980
Change-Id: I6ce9e151a2220ce9e95aa66666933cfb9e2a4a01
Adding the "label" attribute used for participant info correlation
was previously done in app_confbridge but it wasn't working
correctly because it didn't have knowledge about which video
streams belonged to which channel. Only bridge_softmix has that
data so now it's set when the bridge topology is changed.
ASTERISK-28107
Change-Id: Ieddeca5799d710cad083af3fcc3e677fa2a2a499
These macros have been documented as legacy for a long time but are
still used in new code because they exist. Remove all references to:
* ao2_container_alloc_options
* ao2_t_container_alloc_options
* ao2_t_container_alloc
These macro's are still available for use but only in modules. Only
ao2_container_alloc remains due to it's use in over 100 places.
Change-Id: I1a26258b5bf3deb081aaeed11a0baa175c933c7a
__ast_mutex_logger used the variable `canlog` without accepting it as a
argument. Replace with internal macro `log_mutex_error` which takes
canlog as the first arguement. This will prevent confusion when working
with lock.c code, many of the function declare the canlog variable and
in some cases it previously appeared to be unused.
Change-Id: I83b372cb0654c5c18eadc512f65a57fa6c2e9853
* Update the post-answer documentation and example. The Dial example was
incorrect and misleading for the post-answer subroutine useage.
* Fix note and warning paragraphs in option descriptions. They don't show
up in the wiki.
Change-Id: I81019a1fd75d5b9151f76b52c38e2a90da682d14
Most were in comments. A couple were in warning messages.
Pointed out by Jonathan H on the Asterisk users mailing list.
Change-Id: I6286939dff5d0a27a2758140570106f1cb351855
* The dependency ensures that res_pjproject cannot be manually unloaded
before res_rtp_asterisk.
* The dependency allows startup loading errors to report that
res_rtp_asterisk depends upon res_pjproject.
Change-Id: Icf5e7581f4ddd6189929f6174c74dd951f887377
Add attribute_warn_unused_result to ast_taskprocessor_push,
ast_taskprocessor_push_local and ast_threadpool_push. This will help
ensure we perform the necessary cleanup upon failure.
Change-Id: I7e4079bd7b21cfe52fb431ea79e41314520c3f6d
This patch is not in the upstream pjproject and does unsafe things with
the timer->_timer_id and timer->_grp_lock values in pj_timer_entry_reset()
outside of the timer heap lock. pj_timer_entry_reset() is also called for
timers that are not about to be rescheduled in a few places.
Change-Id: I4fe0b4bc648f7be5903cf4531b94fc87275713c1
This allows us to process AO2 statistics for total objects, memory
usage, memory overhead and lock usage.
* Install refstats.py and reflocks.py into the Asterisk scripts folder.
* Enable support for reflocks.py without DEBUG_THREADS.
Steal a bit from the ao2 magic to flag when an object lock is used.
Remove 'lockobj' from reflocks.py since we can now record 'used' or
'unused' for those objects.
Add comments to explain thread safety of the 'struct __priv_data'
bitfields.
Change-Id: I84e9d679cc86d772cc97c888d9d856a17e0d3a4a
This patch sets the callerid_tag to empty string by default.
If the callerid_tag is set to NULL then the tag does not
become part of a connected line update.
For example:
Alice's tag is "Alice".
Bob's tag is empty.
Charlie's tag is "Charlie".
Alice calls Bob and then does attended transfer to Charlie.
When Alice hangs up the CONNECTEDLINE(tag) is "Alice"
on the interception routine on the Charlie's channel, but should be empty.
Ths patch also fix memory leaks if there are more then one options
"callerid", "callerid_tag", "voicemail_extension" and "contact_user"
in the pjsip.conf endpoint definition.
Change-Id: I86ba455c4677ca8d516d9a04ce7fb4d24dd576e4
thread_worker_pair, set_size_data and task_pushed_data structures are
allocated with AO2 objects, passed to a taskprocessor, then released.
They never have multiple owners or use locking so AO2 only adds
overhead.
Change-Id: I2204d2615d9d952670fcb48e0a9c0dd1a6ba5036
The field used to store call arguments was not large enough to hold the
arguments string that can be constructed for 'open'. Expand it to
prevent this warning/error.
Change-Id: I514927f256481bc84df10a51b19d5b5fb1bc387e
The return status when there was no change in statsd.conf was incorrect.
This resulted in the wrong status message on the CLI when reloading the
module.
* Fixed cleanup on initial load if initializing statsd failed.
Change-Id: Id24fae75f1a7ff584a444a5680e867d989792481
George Joseph
Jasper Hafkenscheid
Pascal Cadotte Michaud
Joshua Colp
Richard Mudgett
Alexei Gradinari
Torrey Searle
Corey Farrell
Jenkins2
Sean Bright
Kevin Harwell