When a channel is made the video source, the bridge holds a reference to
it. Whenever the video source changes, that reference is released.
However, a ref leak does occur if the channel leaves the bridge (such as
being hung up) while it is the video source, as the bridge never
releases the ref in such a case.
This patch adds a line to the bridge_channel_internal_join routine such
that, when a channel finishes its time in the bridge, it notifies the
bridge via ast_bridge_remove_video_src that if it is a video source its
reference should be released.
ASTERISK-26555 #close
Change-Id: I3a2f5238a9d2fc49c591f0e65199d782ab0be76a
WebRTC clients really, really want to know the SSRC of the media they're
getting. Changing the SSRC is generally not a good thing.
bridge_softmix, starting in Asterisk 12, started changing the SSRC of
parties as they joined or left the bridge. With most phones, this isn't
a problem: phones just play back the stream they're getting. With WebRTC
clients, however, the SSRC is tied to a media stream that may be
negotiated. When a new SSRC just shows up, the media can be dropped.
As it turns out, the SSRC change shouldn't even be necessary. From the
perspective of the client, it's still talking to Asterisk with the same
media stream: why indicate that the far party has suddenly changed to a
different source of media?
This patch opts to just remove the SSRC changes. With this patch, video
clients that join/leave a softmix bridge actually get the video stream
instead of freaking out.
ASTERISK-26555
Change-Id: I27fec098b32e7c8718b4b65f3fd5fa73527968bf
This reverts commit 93332cb1d0.
Unfortunately, the aforementioned commit caused a regression (incoming calls
would eventually disconnect). Thus it is being removed.
ASTERISK-26523 #close
ASTERISK-25270
Change-Id: Ibf5586adc303073a8eac667a4cbfdb6be184a64d
Fix logic on read second part of H.225 packet. There was infinite loop on
wrong connections due to read before poll.
Change-Id: I42b4bf75c46e4a5c5df5c5ca1f0bd74b8944e7ff
libresample is only needed by pjproject if we're building pjsua, which
we only do if TEST_FRAMEWORK is selected. It's required by pjsua to
process audio which is needed by some testsuite tests. Unfortunately,
pjproject relies on a newer version of libresample than the version
that ships by most distros so we need to compile the version that's
bundled with pjproject. Since we only need it for pjsua, we DON'T want
it's symbols exposed when we actually build asterisk.
There was a problem however... TEST_FRAMEWORK is only known AFTER we've
already run ./configure on both asterisk and pjproject but pjproject's
./configure needs to test it to know whether to set up to build
libresample or not. The previous way of figuring this out was to
always tell ./configure "yes" but not actually build the library. This
caused an issue where building libasteriskpj was being told to include
libresample but it wasn't actually there.
The solution is to still do a default pjproject configure during an
asterisk ./configure but if makeopts or menuselect.makeopts changes
subsequently, we now reconfigure pjproject, taking into account the
current state of TEST_FRAMEWORK. Previously, if makeopts or
menuselect.makeopts changed, only a recompile of pjproject was done.
Change-Id: I9b5d84c61384a3ae07fe30e85c49698378cc4685
Given the scenario where multiple channels are dialed using Dial()
but the caller is picked up using PickupChan() all outgoing channels
except the channel specified to PickupChan() would be marked
as ringing until the call had been hung up.
When using the PickupChan application the channel executing the
application is swapped into place of another channel. As part
of this process the channel is answered. The Dial application
has explicit logic which checks if the channel is answered,
cancels all other outgoing channels, and bridges. This logic is
different than the normal logic that is executed when an outgoing
channel is answered. This different logic failed to publish dial
events stating that the other outgoing channels had been canceled.
As a result references to the outgoing channels were held onto by
the dial masquerade process until the call had been ended and
the channels had gone away. This would result in the channels
appearing in the "core show channels" list despite not being present
anymore and would also result in incorrect device state.
This change makes it so that this logic also publishes
dial events stating that the other outgoing channels have been
canceled.
ASTERISK-26549
Change-Id: Iea7168e6e82f7d4609ec0366153804e4f55ea64f
Since adding all remaining rates of Signed Linear (ASTERISK-24274), SILK
(Gerrit 3136) and Codec 2 (ASTERISK-26217), no RTP Payload Type is left in the
dynamic range (96-127). RFC 3551 section 3 allows to reassign other ranges.
Consequently, when the dynamic range is exhausted, this change utilizes payload
types in the range between 35 and 63 giving room for another 29 payload types.
ASTERISK-26311 #close
Change-Id: I7bc96ab764bc30098a178b841cbf7146f9d64964
PJPROJECT 2.5.5 introduced a race condition with the -r5349 IPv6 DNS
patch.
The patch below fixes a write to freed memory under cartain DNS lookup
conditions.
0006-r5477-svn-backport-Fix-DNS-write-on-freed-memory.patch
ASTERISK-26516
Reported by: Richard Mudgett
Change-Id: Ifdfae9ecf1e41b53080f33aab44ce1a220f349c5
The res_pjsip_sdp_rtp module did not restrict the number of
formats added to a media stream in the SDP to the defined
limit. If allow=all was used with additional loaded codecs this
could result in the next media stream being overwritten some.
This change restricts the module to limit it to the defined
maximum and also increases the maximum in our bundled pjproject.
ASTERISK-26541 #close
Change-Id: I0dc5f59d3891246cafa2f3df5ec406f088559ee8
codecs.conf.sample was missing codec opus's configuration options, descriptions,
and examples. This patch adds the configuration options and examples to
codecs.conf.sample that can be used with codec_opus.
ASTERISK-26538 #close
Change-Id: I1d89bb5e01d3e3b5bd78951b8dd0ff077a83dc8b
This patch adds three new CLI commands:
- ari show apps: list the registered ARI applications
- ari show app: show detailed information about an ARI application
- ari set debug: dump events being sent to an ARI application
Note that while these CLI commands live in the res_stasis module, we use
the 'ari' family for these commands. This was done as most users of
Asterisk aren't aware of the semantic differences between ARI and
res_stasis, and some 'ari' CLI commands already exist.
ASTERISK-26488 #close
Change-Id: I51ad6ff0cabee0d69db06858c13f18b1c513c9f5
If in sip.conf (general section) set option register_retry_403=no,
the command "sip show settings" return value:
Outbound reg. retry 403:0
If in sip.conf (general section) set option register_retry_403=yes,
the command "sip show settings" return value:
Outbound reg. retry 403:-1
* In static char "sip show settings" for "Outbound.reg. retry 403"
option use AST_CLI_YESNO
ASTERISK-26476 #close
Change-Id: I3c14272f05f1067bd2aeaa8b3ef9cf8fcb12dcf9
PATH_MAX is not guaranteed to be defined. In parctice, all but the HURD
define it to a constant. It is indeed not safe to assume there won't be
longer paths and Asterisk generally does err safely on such cases.
So even for HURD we'll just pretend PATH_MAX is 4096.
ASTERISK-25070 #close
Change-Id: I53d10ba18c34c132bcb640a5fd8e0da1d9b22db3
In order for pjsua and its python binding to actually negotiate
audio for the testsuite tests, it needs g711 and resample. The
pj* libraries themselves do not. Unfortunately, pjproject relies
on a brand new libresample that most distros don't ship so we need
to use the libresample already bundled with pjproject. Only the pjsua
executable and the _pjsua.so python library are linked with it so it
shouldn't interfere with asterisk itself.
Also it was pointed out that apply_patches couldn't handle multiple
patches that depended on each other during the dry-run, so the
dry-run was removed.
Change-Id: I24f397462b486dcdde0dcafe40e6c55a6593f098
The NewConnectedLine event has been added by commit fe7671f, but the
documentation was missing.
ASTERISK-26537 #close
Change-Id: I7fc331f18caa28492da9303e576f70884ca8c9e6
Headers declare that memcpy does not accept NULL argument for the first
two parameters. Add a conditional block to prevent memcpy and ast_free
from running on vectors with NULL element array.
ASTERISK-26526 #close
Change-Id: I988a476bb5fcfcbd3f6d6c6b3e7769e4f9629b71
Every ao2 object contains storage for a private variable data_size,
though the value is never read if AO2_DEBUG is disabled. This change
makes the variable conditional, reducing memory usage.
ASTERISK-26524 #close
Change-Id: If859929e507676ebc58b0f84247a4231e11da07f
PJPROJECT 2.5.5 introduced a race condition with the -r5349 IPv6 DNS
patch.
The patches below fix the DNS lookup race condition crash caused by
attempting to send the same message twice for the single DNS lookup.
0006-r5471-svn-backport-Various-fixes-for-DNS-IPv6.patch
0006-r5473-svn-backport-Fix-pending-query.patch
The patch below removes a cached DNS response from the hash table when
another thread is referencing the old entry. The table still contained
the entry when it was destroyed which can result in inexplicable crashes.
0006-r5475-svn-backport-Remove-DNS-cache-entry.patch
ASTERISK-26344 #close
Reported by: Ian Gilmour
ASTERISK-26387 #close
Reported by: Harley Peters
Change-Id: I17fde80359e66f65a91341ceca58d914d0f61cc4
main/Makefile includes third-party/pjproject/build.mak but
doesn't set PJDIR beforehand so "include $(PJDIR)/version.mak"
evaluates to "/version.mak". Fix is to set PJDIR in main/Makefile
before the include.
Change-Id: I0f7c67d60209049056fe9c4b041bf0463aa95604
While publishing device state between multiple instances of Asterisk,
a crash will sporadically occur under high CPS which looks to be a
race condition operating on the publisher queue.
ASTERISK-26506
Change-Id: I28da25d346deb358eff1d563485cabc433ce1ed6
It is only safe to run ast_register_cleanup callbacks when all modules
have been unloaded. Previously these callbacks were run during graceful
shutdown, making it possible to crash during shutdown.
ASTERISK-26513 #close
Change-Id: Ibfa635bb688d1227ec54aa211d90d6bd45052e21
Removing explicit transport definition for endpoints and registrations. It
isn't necessary and isn't generally advised.
ASTERISK-26514 #close
Change-Id: Ifdec5e631962438a4683600968dfa4bfd15909fb
Support for referring to DAHDI channels by logical names was added in
(FIXME: when? Asterisk 11? 1.8?) and was intended to be part of support
of refering to channels by name.
While technically usable, it has never been properly supported in
dahdi-tools, as using it would require many changes at the Asterisk
level. Instead logical mapping was added at the kernel level.
Thus it seems that refering to DAHDI channels by name is not really used
by anyone, and therefore should probably be removed.
Change-Id: I7d50bbfd9d957586f5cd06570244ef87bd54b485
Joshua Colp
zuul
Matt Jordan
Kevin Harwell
Alexander Anikin
George Joseph
Sebastian Gutierrez
Alexander Traud
Richard Mudgett
Grachev Sergey
Tzafrir Cohen
Etienne Lessard
Corey Farrell
mkrokosz
Rusty Newton