This patch adds a new option to the 100rel parameter for pjsip
endpoints called "peer_supported". When an endpoint with this option
receives an incoming request and the request indicated support for the
100rel extension, then Asterisk will send 1xx responses reliably. If
the request did not indicate 100rel support, Asterisk sends 1xx
responses normally.
ASTERISK-30158
Change-Id: Id6d95ffa8f00dab118e0b386146e99f254f287ad
If we find that n_max (currently hard wired to 1) sessions were purged,
schedule the next purge for 1ms into the future rather than 5000ms (as
per current). This way we will purge up to 1000 sessions per second
rather than 1 every 5 seconds.
This mitigates a build-up of sessions should http sessions gets
established faster than 1 per 5 seconds.
Change-Id: I9820d39aa080109df44fe98c1325cafae48d54f5
Signed-off-by: Jaco Kroon <jaco@uls.co.za>
Adds TRIM, LTRIM, and RTRIM, which can be used
for trimming leading and trailing whitespace
from strings.
ASTERISK-30222 #close
Change-Id: I50fb0c40726d044a7a41939fa9026f3da4872554
Adding user=phone to local-side uri's when user_eq_phone=yes is set for
an endpoint. Previously this would only add the header to the To and R-URI.
ASTERISK-30178
Change-Id: Id3bfb5d225d762e7d2668c023fe09e4541ae8600
Fixed a segfault caused by var_list_from_loc_info() encountering
an empty location info element.
Fixed an issue in ast_strsep() where a value with only whitespace
wasn't being preserved.
Fixed an issue in ast_variable_list_from_quoted_string() where
an empty value was considered a failure.
ASTERISK-30215
Reported by: Dan Cropp
Change-Id: Ieca64e061a6d9298f0196c694b60d986ef82613a
This change adds an option, answeredonly, that will prevent music on
hold on channels that are not answered.
ASTERISK-30135
Change-Id: I1ab0defa43a29a26ae39f94c623596cf90fddc08
This change allows TEL URI requests to come through for basic calls. The
allowed requests are INVITE, ACK, BYE, and CANCEL. The From and To
headers will now allow TEL URIs, as well as the request URI.
Support is only for TEL URIs present in traffic from a remote party.
Asterisk does not generate any TEL URIs on its own.
ASTERISK-26894
Change-Id: If5729e6cd583be7acf666373bf9f1b9d653ec29a
We're validating the following functionality:
encrypting a block of data with RSA
decrypting a block of data with RSA
signing a block of data with RSA
verifying a signature with RSA
encrypting a block of data with AES-ECB
encrypting a block of data with AES-ECB
as well as accessing test keys from the keystore.
ASTERISK-30045 #close
Change-Id: I0d10e7b41009c5290a4356c6480e636712d5c96d
The FRAME_TRACE function currently asserts if it sees
a MASQUERADE_NOTIFY. However, this is a legitimate thing
that can happen so asserting is inappropriate, as there
are no clear negative ramifications of such a thing. This
is adjusted to be like the other frames to print out
the subclass.
ASTERISK-30210 #close
Change-Id: I8ecbdcf17e35f64bdeab42868471f581ad1d1a56
Adds an AMI event to indicate that a deadlock
has likely started, when Asterisk is compiled
with DETECT_DEADLOCKS enabled. This can make
it easier to perform automated deadlock detection
and take appropriate action (such as doing a core
dump). Unlike the deadlock warnings, the AMI event
is emitted only once per deadlock.
ASTERISK-30161 #close
Change-Id: Ifc6ed3e390f8b4cff7f8077a50e4d7a5b54e42fb
Adds the end_marked_any option, which can be used
to kick a user from a conference if any marked user
leaves.
ASTERISK-30211 #close
Change-Id: I9e8da7ccb892e522546c0f2b5476d172e022c2f5
Added an 'a' option to the GEOLOC_PROFILE function to allow
variable lists like location_info_refinement to be appended
to instead of replacing the entire list.
Added an 'r' option to the GEOLOC_PROFILE function to resolve all
variables before a read operation and after a Set operation.
Added a few missing parameters to the ones allowed for writing
with GEOLOC_PROFILE.
Fixed a bug where calling GEOLOC_PROFILE to read a parameter
might actually update the profile object.
Cleaned up XML documentation a bit.
ASTERISK-30190
Change-Id: I75f541db43345509a2e86225bfa4cf8e242e5b6c
You can now specify the location object's format, location_info,
method, location_source and confidence parameters directly on
a profile object for simple scenarios where the location
information isn't common with any other profiles. This is
mutually exclusive with setting location_reference on the
profile.
Updated appdocsxml.dtd to allow xi:include in a configObject
element. This makes it easier to link to complete configOptions
in another object. This is used to add the above fields to the
profile object without having to maintain the option descriptions
in two places.
ASTERISK-30185
Change-Id: Ifd5f05be0a76f0a6ad49fa28d17c394027677569
Added profile parameter "suppress_empty_ca_elements" that
will cause Civic Address elements that are empty to be
suppressed from the outgoing PIDF-LO document.
Fixed a possible SEGV if a sub-parameter value didn't have a
value.
ASTERISK-30177
Change-Id: I924ccc5aa2f45110a3155b22e53dfaf3ef2092dd
The trigger to perform outgoing geolocation processing is the
presence of a geoloc_outgoing_call_profile on an endpoint. This
is intentional so as to not leak location information to
destinations that shouldn't receive it. In a totally dynamic
configuration scenario however, there may not be any profiles
defined in geolocation.conf. This makes it impossible to do
outgoing processing without defining a "dummy" profile in the
config file.
This commit adds 4 built-in profiles:
"<prefer_config>"
"<discard_config>"
"<prefer_incoming>"
"<discard_incoming>"
The profiles are empty except for having their precedence
set and can be set on an endpoint to allow processing without
entries in geolocation.conf. "<discard_config>" is actually the
best one to use in this situation.
ASTERISK-30182
Change-Id: I1819ccfa404ce59802a3a07ad1cabed60fb9480a
When producing an outgoing SDP we iterate through the configured
formats and produce SDP information. It is possible for some
configured formats to not have SDP information available. If this
is the case we skip over them to allow the SDP to still be
produced.
ASTERISK-29185
Change-Id: I3e37569aa4ca341260e6ca5904dc2f75e46a1749
If "core show channels" is run before startup has completed, it
is possible for bad ao2 refs to occur because the system is not
yet fully initialized. This will lead to an assertion failing.
To prevent this, initialization of CLI builtins is moved to be
later along in the main load sequence. Core CLI commands are
loaded at the same time, but channel-related commands are loaded
later on.
ASTERISK-29846 #close
Change-Id: If6b3cde802876bd738c1b4cf2683bea6ddc615b6
This change adds support using the pjsip_tls_transport_restart
function for reloading the TLS certificate and key, if the filenames
remain unchanged. This is useful for Let's Encrypt and other
situations. Note that no restart of the transport will occur if
the certificate and key remain unchanged.
ASTERISK-30186
Change-Id: I9bc95a6bf791830a9491ad9fa43c17d4010028d0
Fixes two typos that cause fax detection to not work.
One refers to the wrong frame variable, and the other
refers to the subclass.integer instead of the frametype
as it should.
ASTERISK-30192 #close
Change-Id: I7b35fdb7bcf25a29a212eee37c20812c64ab3ef1
The following required columns were missing,
now added to the ps_endpoints table:
incoming_call_offer_pref
outgoing_call_offer_pref
stir_shaken_profile
ASTERISK-29453
Change-Id: I5cf565edf30195844d6acbc1e1de8c5f0d837568
With gcc (Ubuntu 11.2.0-19ubuntu1) 11.2.0:
> chan_dahdi.c:4129:18: error: ‘%s’ directive output may be truncated
> writing up to 255 bytes into a region of size between 242 and 252
> [-Werror=format-truncation=]
This removes the error-prone sizeof(...) calculations in favor of just
doubling the size of the base buffer.
Change-Id: I2d276785286730d3d5d0a921bcea2e065dbf27c5
Set termination state to old subscriptions to prevent queueing and sending
NOTIFY messages on exten/device state changes.
Postpone destruction of old subscriptions until all already queued tasks
that may be using old subscriptions have completed.
ASTERISK-29906
Change-Id: I96582aad3a26515ca73a8460ee6756f56f6ba23b
The DECLARE_STRINGFIELD_SETTERS_FOR() declares ast_channel_name_set()
for us, so no need to declare it separately.
Change-Id: I4813a884ada475ddc62bca480bceb4a53b3ec59a
Adds additional control options over the transfer
feature functionality to give users more control
in how the transfer feature sounds and works.
First, the "transfer" sound that plays when a transfer is
initiated can now be customized by the user in
features.conf, just as with the other transfer sounds.
Secondly, the user can now specify the transfer extension
in advance by using the TRANSFER_EXTEN variable. If
a valid extension is contained in this variable, the call
will automatically be transferred to this destination.
Otherwise, it will fall back to collecting the extension
from the user as is always done now.
ASTERISK-29899 #close
Change-Id: Ibff309caa459a2b958706f2ed0ca393b1ef502e3
Fixes a few coding guideline violations:
* Use of C99 comments
* Opening brace on same line as function prototype
ASTERISK-30163 #close
Change-Id: I07771c4c89facd41ce8d323859f022ddbddf6ca7
* Added processing for the 'confidence' element.
* Added documentation to some APIs.
* removed a lot of complex code related to the very-off-nominal
case of needing to process multiple location info sources.
* Create a new 'ast_geoloc_eprofile_to_pidf' API that just takes
one eprofile instead of a datastore of multiples.
* Plugged a huge leak in XML processing that arose from
insufficient documentation by the libxml/libxslt authors.
* Refactored stylesheets to be more efficient.
* Renamed 'profile_action' to 'profile_precedence' to better
reflect it's purpose.
* Added the config option for 'allow_routing_use' which
sets the value of the 'Geolocation-Routing' header.
* Removed the GeolocProfileCreate and GeolocProfileDelete
dialplan apps.
* Changed the GEOLOC_PROFILE dialplan function as follows:
* Removed the 'profile' argument.
* Automatically create a profile if it doesn't exist.
* Delete a profile if 'inheritable' is set to no.
* Fixed various bugs and leaks
* Updated Asterisk WiKi documentation.
ASTERISK-30167
Change-Id: If38c23f26228e96165be161c2f5e849cb8e16fa0
If the CONFBRIDGE function is used to dynamically set
menu options, a memory leak occurs when a menu option
that has been set is overridden, since the menu entry
is not destroyed before being freed. This ensures that
it is.
Additionally, logic that duplicates the destroy function
is removed in lieu of the destroy function itself.
ASTERISK-28422 #close
Change-Id: I71cfb5c24e636984d41086d1333a416dc12ff995
The manager XML documentation documents a "FilterList"
action, but there is no such action. Therefore, this can
lead to confusion when people try to use a documented
action that does not, in fact, exist. This is removed
as the action never did exist in the past, nor would it
be trivial to add since we only store the regex_t
objects, so the filter list can't actually be provided
without storing that separately. Most likely, the
documentation was originally added (around version 10)
in anticipation of something that never happened.
ASTERISK-29917 #close
Change-Id: I846b16fd6f80a91d4ddc5d8a861b522d7c6f8f97
The MeetmeList and MeetmeListRooms AMI
responses are currently completely undocumented.
This adds documentation for these responses.
ASTERISK-30018 #close
Change-Id: Id93135b7edf01de6f8fba266e2122989dc8996b8
Adjusts some logging levels to be more or less important,
that is more prominent when actual problems occur and less
prominent for less noteworthy things.
ASTERISK-30153 #close
Change-Id: Ifc8f7df427aa018627db462125ae744986d3261b
The CDR sample config still mentions that app_mysql
is available in the addons directory, but this is
incorrect as it was removed as of 19. This removes
that to avoid confusion.
ASTERISK-30160 #close
Change-Id: Ie5293ccb4f2b365896981811b480544e67bb9cd7
There are a handful of files in the tree that
reference an SVN link for the coding guidelines.
This removes these because the links are dead
and the vast majority of source files do not
contain these links, so this is more consistent.
app_skel still maintains an (up to date) link
to the coding guidelines.
ASTERISK-30159 #close
Change-Id: I35bbb20f66982e98099cff3029ede20091ffdac7
Documents the ConfbridgeListRooms AMI response,
which is currently not documented.
ASTERISK-30020 #close
Change-Id: Id6fff7a936244bae7b52686301eb740c1169cdea
Adds missing documentation for the field parameter
for the SRVRESULT function.
ASTERISK-30151
Reported by: Chris Young
Change-Id: I4385a2e0892a07e30dea1a8a0588e2c1bea2b1f1
Maximilian Fridrich
Jaco Kroon
Naveen Albert
George Joseph
Philip Prindeville
Asterisk Development Team
Mike Bradeen
sungtae kim
Ben Ford
Joshua C. Colp
Sean Bright
Alexei Gradinari