asterisk

Commit Graph

Author	SHA1	Message	Date
George Joseph	29115e2384	app_voicemail: Remove need to subscribe to stasis app_voicemail was using the stasis cache to build and maintain a list of mailboxes that had subscribers. It then used this list to determine if a mailbox should be polled for new messages if polling was enabled. For this to work, stasis had to cache every subscription and unsubscription to the mailbox which caused a lot of overhead, both cpu and memory related. Since polling is only required when changes are being made to mailboxes outside of app_voicemail and since the number of mailboxes that don't have any subscribers is likely to be very low, all mailboxes are now polled instead of just the ones with subscribers. This paves the way for disabling the caching of stasis subscription change messages. Also fixed cleanup in some of the unit tests that not only left test users in the users list but also caused segfaults if the tests were run more than once. ASTERISK-27121 Change-Id: I5cceb737246949f9782955c64425b8bd25a9e9ee	7 years ago
Sean Bright	b0a0b975c5	autoconf: Check for srtp_get_version_string() before using it Change-Id: Id2a916ff9448706090e72ff2c7fb3f5ba24a05df	7 years ago
George Joseph	0107e1aa5a	Merge "res_srtp.c: Show linked version of libsrtp on module init" into 16	7 years ago
Jenkins2	4300410c9a	Merge "res_pjsip: Log IPv6 addresses correctly" into 16	7 years ago
George Joseph	4a309839eb	CI: Fix typo in testsuite git checkout Change-Id: I30024515e5b00a5044fd39fbff27d818f016b719	7 years ago
Sean Bright	55ca51af21	res_srtp.c: Show linked version of libsrtp on module init Change-Id: Ib0a645d6985de5757cc4399ed2524b2d02c4f342	7 years ago
Sean Bright	887a315e17	res_pjsip: Log IPv6 addresses correctly Both pjsip_tx_data.tp_info.dst_name and pjsip_rx_data.pkt_info.src_name store IPv6 addresses without enclosing brackets. This causes some log output to be confusing because it is difficult to separate the IPv6 address from a port specification. * Use pj_sockaddr_print() along with pjsip_tx_data.tp_info.dst_addr and pjsip_rx_data.pkt_info.src_addr where possible for consistent IPv6 output. * When a pj_sockaddr is not available, explicitly wrap IPv6 addresses in brackets. * When assigning pjsip_rx_data.pkt_info.src_name ourselves, make sure to also set pjsip_rx_data.pkt_info.src_addr. Change-Id: I5cfe997ced7883862a12b9c7d8551d76ae02fcf8	7 years ago
George Joseph	3f9544c1f5	CI: Use proper credentials for Security testsuite checkout Can't do anonymous http checkout from Security-testsuite. Need to use same credentials as the gerrit review checkout. Change-Id: I87af68c995cb8926f5e87f9af245600d76984f05	7 years ago
George Joseph	349355f1f1	Merge "res_musiconhold.c: Restart MOH if previous hold just reached end-of-file" into 16	7 years ago
George Joseph	06d51a0408	Merge "optional_api: Remove unused nonoptreq fields" into 16	7 years ago
George Joseph	9db82309d5	Merge "CI: Use .gitreview to default BRANCH_NAME." into 16	7 years ago
Jenkins2	39829f0a78	Merge "res_pjproject: Fix sockaddr conversion routines for non-bundled PJSIP" into 16	7 years ago
Corey Farrell	5842741689	CI: Use .gitreview to default BRANCH_NAME. This ensures that binary modules are avoided in the master branch even if BRANCH_NAME is not set. Change-Id: I79162d2063f22fa9d6b31fde4827ace2dd5bf0da	7 years ago
Walter Doekes	78453e65fd	optional_api: Remove unused nonoptreq fields As they're not actively used, they only grow stale. The moduleinfo field itself is kept in Asterisk 13/15 for ABI compatibility. ASTERISK-28046 #close Change-Id: I8df66a7007f807840414bb348511a8c14c05a9fc	7 years ago
Joshua Colp	7ed02b4925	Merge "manager: Set AMI event "Newexten" to the EVENT_FLAG_DIALPLAN class" into 16	7 years ago
lvl	f4bffe2326	manager: Set AMI event "Newexten" to the EVENT_FLAG_DIALPLAN class The documentation already specified EVENT_FLAG_DIALPLAN for this event, but the implementation was using EVENT_FLAG_CALL. Using EVENT_FLAG_DIALPLAN allows AMI clients to opt out of receiving this highly verbose event. ASTERISK-28033 Change-Id: I45b3119f30e4dbc17b49831f2b1a4f2c1beadafe	7 years ago
Sean Bright	e5739c494c	res_pjproject: Fix sockaddr conversion routines for non-bundled PJSIP The bundled version of pjproject has a patch for Solaris compatability that changes the definition of various socket structures which we need to account for when compiling against a non-bundled version. ASTERISK-28049 #close Change-Id: Ia1ea47c433fc2d915115193ee889a752373925f0	7 years ago
Corey Farrell	ecb3b23b07	Build System: Resolve conflict between DESTDIR and bundled jansson. If Asterisk is built using a DESTDIR this will cause the bundled jansson to be installed to an unexpected location and we will fail to find it. Change-Id: Id033e2813261e0d45232383d44c6391122169548	7 years ago
Frederic LE FOLL	ccfd2e0f5d	res_musiconhold.c: Restart MOH if previous hold just reached end-of-file On MOH activation, moh_files_readframe() is called while the current stream attached to the channel is NULL and it calls ast_moh_files_next() immediately. However, it won't call ast_moh_files_next() again if sample reading fails. The failure may occur because res_musiconhold retains the last sample reading position in the channel data and MOH during the previous hold/retrieve just reached EOF. Obviously, a bit of bad luck is required here. * Restructured moh_files_readframe() to try a second time to start MOH if there was no stream setup and the saved position was at EOF. Also added comments describing what is going on for each step. ASTERISK-28029 Change-Id: I1508cf2c094f8feca22d6f76deaa9fdfa9944860	7 years ago
Jenkins2	c1a2c84361	Merge "core: Don't stop generators when writing RTCP frames." into 16	7 years ago
Joshua Colp	3c52cc32f1	Merge "stasis_cache: Prune stasis_subscription_change messages" into 16	7 years ago
Joshua Colp	6344cceed2	Merge "app_queue: Update realtime queuemembers after wait_a_bit(), not before" into 16	7 years ago
Joshua Colp	af6a3d02e1	core: Don't stop generators when writing RTCP frames. Generators provide such functionality as tone generation or silence generation. RTCP frames provide RTCP information and should not stop generators from operating. ASTERISK-28005 Change-Id: Ieadada07b068a7aa426e8763f1b73a18e1ac34a9	7 years ago
lvl	034a3d8b86	app_queue: Update realtime queuemembers after wait_a_bit(), not before This ensures the most up-to-date information is used for the next call attempt. ASTERISK-28032 Change-Id: I02fc17c6ffb50bb60ea97c2d2e6023e8061815ce	7 years ago
Sean Bright	3134fd95a9	res_pjproject: Add utility functions to convert between socket structures Currently, to convert from a pj_sockaddr to an ast_sockaddr, the address needs to be rendered to a string and then parsed into the correct structure. This also involves a call to getaddrinfo(3). The same is true for the inverse operation. Instead, because we know the internal structure of both ast_sockaddr and pj_sockaddr, we can translate directly between the two without the need for an intermediate string. Change-Id: If0fc4bba9643f755604c6ffbb0d7cc46020bc761	7 years ago
George Joseph	ead0bc63da	Merge "http.c: Give HTTP error response when received lines are too long." into 16	7 years ago
George Joseph	9fb166cf3b	stasis_cache: Prune stasis_subscription_change messages The stasis cache provides a way to reconstruct the current state of topic subscribers. Unfortunately, since every subscribe and unsubscribe is cached, the cache continues to grow unabated while asterisk is running. This patch removes subscribe messages from the cache when the corresponding unsubscribe is received. This patch also registers the cache containers with ao2 so that if AO2_DEBUG is turned on, you can list the container and get its stats from the CLI. ASTERISK-27121 Change-Id: I3d18905e477f3721815da91f30da8d3fbb2d4f56	7 years ago
George Joseph	85a7c33acf	Merge "app_dial: set the comment for OPT_ARG_ANNOUNCE to really what is done" into 16	7 years ago
George Joseph	597f612645	Merge "res_pjsip: Fix mwi_subscribe_replaces_unsolicited type mismatch" into 16	7 years ago
George Joseph	10460501ca	Merge "iostream.c: Fix ast_iostream_gets() needlessly returning failure." into 16	7 years ago
Rodrigo Ramírez Norambuena	8879a62c1c	app_dial: set the comment for OPT_ARG_ANNOUNCE to really what is done Change-Id: I08f88adb09f7e5813f37e70fecd787468cdb32c8	7 years ago
Chris-Savinovich	cfb854e241	pbx_config.c: Fix reloading module if initially declined to load Added decline if extensions.conf file not available when loading pbx_config, and also made sure everything gets properly unregistered and/or destroyed on unload. Change-Id: Ib00665106043b1be5148ffa7a477396038915854	7 years ago
Joshua Colp	ed7cef7d06	Merge "make config: os-release output error." into 16	7 years ago
Richard Mudgett	4fcdcfaa37	http.c: Give HTTP error response when received lines are too long. Added a check when we receive a HTTP request line or header line that is too long. We now return an error response to the sender because we are not able to process the request. Change-Id: I6df2705435fd7dde4d5d3bdf7acec859cfb7c12d	7 years ago
Richard Mudgett	f6a165208b	iostream.c: Fix ast_iostream_gets() needlessly returning failure. Providing a buffer larger than the internal buffer of ast_iostream_gets() fails to get lines longer than the internal buffer. * Made ast_iostream_gets() fill the supplied buffer with read data until either a '\n' is found or the supplied buffer is filled just like fgets(). Change-Id: If18b3f6ee500e22f0633a68779ed09f7e0f305ed	7 years ago
Joshua Colp	62afa54977	Merge "res_fax: Handle fax gateway being started more than once." into 16	7 years ago
Joshua Colp	ad37ab9a8f	Merge "res_pjsip_transport_websocket: Properly set src_name for IPv6" into 16	7 years ago
Richard Mudgett	4dd8b5bbb4	res_pjsip: Fix mwi_subscribe_replaces_unsolicited type mismatch ASTERISK-27988 Change-Id: Iccafdd0552ea8aaed647620fb14499f1bf341843	7 years ago
Rodrigo Ramírez Norambuena	1edd9eb309	make config: os-release output error. Fix not show the error "/bin/sh: /etc/os-release: No such file or directory" when the command 'make config' is run in a System without systemv. The instruction 'make config' pre execute the syntax "$(shell . /etc/os-release && echo $$ID)" to identified if system is a Slackware and Opensuse. This change prevent show the message and is send to the /dev/null Change-Id: I7f43e281a8d9405b2519fc653de82d9b8b645fdf	7 years ago
Joshua Colp	6f27ad59f5	Merge "Create --disable-binary-modules option." into 16	7 years ago
Joshua Colp	390d0b42ca	res_fax: Handle fax gateway being started more than once. The T.38 fax gateway state machine can cause the fax gateway to be started more than once on a channel depending on the responses of the remote endpoint. This would previously leak the channel name, channel unique id, and underlying fax engine state. This change instead makes it so that if the fax gateway session is already present and not reserved the fax gateway is not started again. ASTERISK-27981 Change-Id: I552d95086860cb18f2522ee40ef47b13b6da2e0e	7 years ago
George Joseph	a52b56b4d1	Merge "alembic: increase uri column size" into 16	7 years ago
Sean Bright	245fb462d6	res_pjsip_transport_websocket: Properly set src_name for IPv6 SIP responses over WebSockets when the client is using IPv6 have invalid Via headers according to RFC 3261. The 'received' header parameter should not be wrapped in brackets if it is an IPv6 address. When src_name is populated by the built-in PJSIP transports, the code uses pj_sockaddr_print() with 'flags' set to 0, meaning that the brackets are not rendered around IPv6 addresses. This may be related to ASTERISK~27101. See also: https://github.com/onsip/SIP.js/pull/594 ASTERISK-28020 #close Change-Id: I8ea9d289901b837512bee2ca2535e3dc14f04d77	7 years ago
Corey Farrell	1b1f47bef6	Create --disable-binary-modules option. This new option can be passed for ./configure or ./tests/CI/buildAsterisk.sh to prevent download/install of binary modules. Normally enabling the categories MENUSELECT_CODECS or MENUSELECT_RES will result in binary modules being enabled even if the build target is incompatible with those modules. This includes CI scripts which enable categories before disabling specific modules. If more binary modules are offered in the future this will help avoid accidentally downloading them if unwanted or incompatible. Adding a binary module will only require creating a new menuselect entry similar to the existing ones, it will not be necessary to modify the CI scripts. Change-Id: I6b1bd1c75a2e48f05b8b8a45b7a7a2d00a079166	7 years ago
neutrino88	aa2755cbb3	res/res_rtp_asterisk: remove debug traces generated by an empty frame The realtime text timer pops regularly and sends text frames even if the buffer is empty. This causes a lot of unecessary debug logging. * Made red_write() test if we need to send a frame before calling ast_rtp_write() ASTERISK-28002 Reported by: Emmanuel BUU Tested by: Emmanuel BUU Change-Id: Icf81310c3b8080b615a42060afc02ab41f9523dd	7 years ago
Joshua Colp	3d495f89bc	Merge "pbx_dundi: Added IPv6 support for dundi" into 16	7 years ago
Jenkins2	14c84efbfe	Merge "chan_sip: improved ip:port finding of peers for non-UDP transports." into 16	7 years ago
Jenkins2	777d125516	Merge "sample_configs: noload res_hep.so by default" into 16	7 years ago
Jaco Kroon	46442aa9e5	chan_sip: improved ip:port finding of peers for non-UDP transports. Also remove function peer_ipcmp_cb since it's not used (according to rmudgett). Prior to `b2c4e8660a` (ASTERISK_27457) insecure=port was the defacto standard. That commit also prevented insecure=port from being applied for sip/tcp or sip/tls. Into consideration there are three sets of behaviour: 1. "previous" - before the above commit. 2. "current" - post above commit, pre this one. 3. "new" - post this commit. The problem that the above commit tried to address was guests over TCP. It succeeded in doing that but broke transport!=udp with host!=dynamic. This commit attempts to restore sane behaviour with respect to transport!=udp for host!=dynamic whilst still retaining the guest users over tcp. It should be noted that when looking for a peer, two passes are made, the first pass doesn't have SIP_INSECURE_PORT set for the searched-for peer, thus looking for full matches (IP + Port), the second pass sets SIP_INSECURE_PORT, thus expecting matches on IP only where the matched peer allows for that (in the author's opinion: UDP with insecure=port, or any TCP based, non-dynamic host). In previous behaviour there was special handling for transport=tcp\|tls whereby a peer would match during the first pass if the utilized transport was TCP\|TLS (and the peer allowed that specific transport). This behaviour was wrong, or dubious at best. Consider two dynamic tcp peers, both registering from the same IP (NAT), in this case either peer could match for connections from an IP. It's also this behaviour that prevented SIP guests over tcp. The above referenced commit removed this behaviour, but kept applying the SIP_INSECURE_PORT only to WS\|WSS\|UDP. Since WS and WSS is also TCP based, the logic here should fall into the TCP category. This patch updates things such that the previously non-explicit (TCP behaviour) transport test gets performed explicitly (ie, matched peer must allow for the used transport), as well as the indeterministic source-port nature of the TCP protocol is taken into account. The new match algorithm now looks like: 1. As per previous behaviour, IP address is matched first. 2. Explicit filter with respect to transport protocol, previous behaviour was semi-implied in the test for TCP pure IP match - this now made explicit. 3. During first pass (without SIP_INSECURE_PORT), always match on port. 4. If doing UDP, match if matched against peer also has SIP_INSECURE_PORT, else don't match. 5. Match if not a dynamic host (for non-UDP protocols) 6. Don't match if this is WS\|WSS, or we can't trust the Contact address (presumably due to NAT) 7. Match (we have a valid Contact thus if the IP matches we have no choice, this will likely only apply to non-NAT). To logic-test this we need a few different scenarios. Towards this end, I work with a set number of peers defined in sip.conf: [peer1] host=1.1.1.1 transport=tcp [peer2] host=1.1.1.1 transport=udp [peer3] host=1.1.1.1 port=5061 insecure=port transport=udp [peer4] host=1.1.1.2 transport=udp,tcp [peer5] host=dynamic transport=udp,tcp Test cases for UDP: 1 - incoming UDP request from 1.1.1.1: - previous: - pass 1: * peer1 or peer2 if from port 5060 (indeterminate, depends on peer ordering) * peer3 if from port 5061 * peer5 if registered from 1.1.1.1 and source port matches - pass 2: * peer3 - current: as per previous. - new: - pass 1: * peer2 if from port 5060 * peer3 if from port 5061 * peer5 if registered from 1.1.1.1 and source port matches - pass 2: * peer3 2 - incoming UDP request from 1.1.1.2: - previous: - pass 1: * peer5 if registered from 1.1.1.2 and port matches * peer4 if source port is 5060 - pass 2: * no match (guest) - current: as previous. - new as previous (with the variation that if peer5 didn't have udp as allowed transport it would not match peer5 whereas previous and current code could). 3 - incoming UDP request from anywhere else: - previous: - pass 1: * peer5 if registered from that address and source port matches. - pass 2: * peer5 if insecure=port is additionally set. * no match (guest) - current - as per previous - new - as per previous Test cases for TCP based transports: 4 - incoming TCP request from 1.1.1.1 - previous: - pass 1 (indeterministic, depends on ordering of peers in memory): * peer1; or * peer5 if peer5 registered from 1.1.1.1 (irrespective of source port); or * peer2 if the source port happens to be 5060; or * peer3 if the source port happens to be 5061. - pass 2: cannot happen since pass 1 will always find a peer. - current: - pass 1: * peer1 or peer2 if from source port 5060 * peer3 if from source port 5060 * peer5 if registered as 1.1.1.1 and source port matches - pass 2: * no match (guest) - new: - pass 1: * peer 1 if from port 5060 * peer 5 if registered and source port matches - pass 2: * peer 1 5 - incoming TCP request from 1.1.1.2 - previous (indeterminate, depends on ordering): - pass 1: * peer4; or * peer5 if peer5 registered from 1.1.1.2 - pass 2: cannot happen since pass 1 will always find a peer. - current: - pass 1: * peer4 if source port is 5060 * peer5 if peer5 registered as 1.1.1.2 and source port matches - pass 2: * no match (guest). - new: - pass 1: * peer4 if source port is 5060 * peer5 if peer5 registered as 1.1.1.2 and source port matches - pass 2: * peer4 6 - incoming TCP request from anywhere else: - previous: - pass 1: * peer5 if registered from that address - pass 2: cannot happen since pass 1 will always find a peer. - current: - pass 1: * peer5 if registered from that address and port matches. - pass 2: * no match (guest) - new: as per current. It should be noted the test cases don't make explicit mention of TLS, WS or WSS. WS and WSS previously followed UDP semantics, they will now enforce source port matching. TLS follow TCP semantics. The previous commit specifically tried to address test-case 6, but broke test-cases 4 and 5 in the process. ASTERISK-27881 #close Change-Id: I61a9804e4feba9c7224c481f7a10bf7eb7c7f2a2	7 years ago
Jaco Kroon	d84de695ed	AMI: be less verbose when adding HTTP headers to AMI/HTTP messages. All HTTP/AMI message headers are being sent to the verbose channel. There are multiple places this is happening. Consolidate the loop into a function. Drop the debug/verbose message. Convert to using ast_asprintf to perform the length calculation, memory allocation and snprintf all in one step. Change-Id: Ic45e673fde05bd544be95ad5cdbc69518207c1a1	7 years ago

1 2 3 4 5 ...

31493 Commits (29115e23848cceee0e2763bc70e87cb311919cdd) All Branches Search

31493 Commits (29115e23848cceee0e2763bc70e87cb311919cdd)

All Branches