If the name of a peer is known and a SIP request is sent using that
peer's name, the address of the peer will change even if the request
fails the authentication challenge. This means that an endpoint can
be altered and even rendered unusuable, even if it was in a working
state previously. This can only occur when the nat option is set to the
default, or auto_force_rport.
This change checks the result of authentication first to ensure it is
successful before setting the address and the nat option.
ASTERISK-28589 #close
Change-Id: I581c5ed1da60ca89f590bd70872de2b660de02df
If an AMI user without the "system" authorization calls the
Originate AMI command with the Originate application,
the second Originate could run the "System" command.
Action: Originate
Channel: Local/1111
Application: Originate
Data: Local/2222,app,System,touch /tmp/owned
If the "system" authorization isn't set, we now block the
Originate app as well as the System, Exec, etc. apps.
ASTERISK-28580
Reported by: Eliel Sardañons
Change-Id: Ic4c9dedc34c426f03c8c14fce334a71386d8a5fa
If a re-invite comes in initiating T.38, but there is no c line in the
SDP and the port is also 0, a crash can occur. A check is now done on
the port to see if the steam is already declined, preventing the crash.
The logic was moved to res_pjsip_session.c because it is handled in a
similar manner in later versions of Asterisk.
ASTERISK-28612
Reported by: Salah Ahmed
Change-Id: Ifc4a0d05b32c7f2156e77fc8435a6ecaa6abada0
Fixes: error: ‘domain_name’ may be used uninitialized in this function
Found with gcc (Ubuntu 9.2.1-9ubuntu2) 9.2.1 20191008
Change-Id: I44413b49ea1205aa25538142161deb73883c79e8
The original clone depth of 10 was causing the need to rebase
changes whose parent was older than the 10 commits. The clone
depth has been increased to 100.
Workspace cleanup was only happening for successful builds which
wasn't enough to keep the 8G workspace in-memory drives on the
docker slaves from filling up. Now the workspaces are cleaned up
after every build regardless of success/failure. If you need to
preserve builds temporarily, you can log into Jenkins/Manage
Jenkins/Configure System and change the CLEANUP_WS_* environment
variable for the job type you're troubleshooting to "FALSE".
Change-Id: I0d7366e87cea714e5dbc9488caf718802fce75ca
Upon a short PRI disconnection, libpri may maintain Q.921 layer 'up' and
may thus not send PRI_EVENT_DCHAN_DOWN / PRI_EVENT_DCHAN_UP events.
If pri_event_alarm() clears DCHAN_UP status bit upon alarm detection
and no Q.921 reconnection sequence occurs, chan_dahdi will keep
seeing span status "Down" at the end of alarm.
This patch modifies pri_event_alarm() in order to keep DCHAN_UP bit
unchanged. libpri will send a PRI_EVENT_DCHAN_DOWN event if it detects
a disconnection of Q.921 layer and this will clear DCHAN_UP if required.
ASTERISK-28615
Change-Id: Ibe27df4971fd4c82cc6850020bce4a8b2692c996
The current code sets alert levels starting from index 1.
Need to set on whole pool starting from index 0.
Change-Id: I5decbb43160954fb9a512f04302637fc666b6f5d
When user wants to send json data, the default Content-Type header
is incorect (application/x-www-form-urlencoded). This patch allows
to set any custom headers so the Content-Type header can be
overriden. User can set multiple headers by multiple calls of
curlopt(). This approach is not consistent with other parameters,
but is more readable in dialplan than one call with multiple
headers.
ASTERISK-28613
Change-Id: I4dd68c3f4e25362ef941d73a3861f58348dcfbf9
resource_events:app_handler() was locking the session, then
attempting to determine if the app had debug enabled which
locked the app_registry container. res_stasis:__stasis_app_register
was locking the app_registry container then calling app_update
which caused app_handler (which locks the session) to run.
The result was a deadlock.
* Updated resource_events:app_handler() to determine if debug was
set (which locks the app_registry) before obtaining the session lock.
* Updated res_stasis:__stasis_app_register to release the app_registry
container lock before calling app_update (which locks the sesison).
ASTERISK-28423
Reported by Ross Beer
Change-Id: I58c69d08cb372852a63933608e4d6c3e456247b4
ASTERISK_28143 attempted to fix an issue where calls with no audio would never
timeout. It did so by adding AST_FRAME_NULL as a frame type to process in its
calculations. Unfortunately these frames seem to show up at irregular time
intervals. This resulted in app_amd returning prematurely most of the time.
* Removed AST_FRAME_NULL from the calculations
* Added a check to see how much time has actually passed since app_amd began
ASTERISK-28608
Change-Id: I642a21b02d389b17e40ccd5357754b034c3daa42
OpenSSL can not tolerate if the packet sent out does not
match the length that it provided to the sender. This change
lies and says that each time the full packet was sent. If
a problem does occur then a retransmission will occur as
appropriate.
ASTERISK-28576
Change-Id: Id42455b15c9dc4eb987c8c023ece6fbf3c22a449
MOH continues to play to a channel if that channel was on hold prior to
entering a softmix bridge. MOH will not stop even if the original "holder"
attempts an unhold.
For the most part a softmix bridge ignores holds, so a participating channel
shouldn't join while on hold. This patch checks to see if the channel joining
the softmix bridge is currently on hold. If so then it indicates an unhold.
ASTERISK-28618
Change-Id: I66ccd4efc80f5b4c3dd68186b379eb442916392b
There exists a scenario where a thread can hold a lock on the
channels container while trying to lock a bridge. At the same
time another thread can hold the lock for said bridge while
attempting to retrieve a channel. This causes a deadlock.
This change fixes this scenario by retrieving a channel snapshot
instead of a channel, as information present in the snapshot
is all that is needed.
ASTERISK-28616
Change-Id: I68ceb1d62c7378addcd286e21be08a660a7cecf2
If the last line of a file does not have a terminating EOL sequence, we
potentially add garbage to the value returned from the FILE() function.
There is no overflow potential here as we are reading from a buffer of a
known size, we are just reading too much of it.
ASTERISK-26481 #close
Change-Id: I50dd4fcf416fb3c83150040a1a79a59d9eb1ae01
This patch fixes several issues reported by the lgtm code analysis tool:
https://lgtm.com/projects/g/asterisk/asterisk
Not all reported issues were addressed in this patch. This patch mostly fixes
confirmed reported errors, potential problematic code points, and a few other
"low hanging" warnings or recommendations found in core supported modules.
These include, but are not limited to the following:
* innapropriate stack allocation in loops
* buffer overflows
* variable declaration "hiding" another variable declaration
* comparisons results that are always the same
* ambiguously signed bit-field members
* missing header guards
Change-Id: Id4a881686605d26c94ab5409bc70fcc21efacc25
MySql 8.0.1 replaced the "my_bool" type with "bool" so an #if
was added to use "bool" with MYSQL_VERSION_ID >= 80001.
ASTERISK-28604
Change-Id: I66a28d8f0011e33774edee13a6f8efd2302bb920
If the "max_retries" option is set to 0 then upon failure no
further attemps are made, so explicitly document the behavior.
ASTERISK-28602
Change-Id: I1e30daae9dd6c49ce18744164214d3def505acbf
Calling ne_uri_parse allocates memory that needs to be freed with a
corresponding call to ne_uri_free.
ASTERISK-28572 #close
Change-Id: I8a6834da27000a6807d89cb7a157b2a88fcb5e61
This change ensures that the module isn't unloaded when a
WebSocket is open. Previously it was possible to unload the
module manually or during shutdown which could cause a crash
when any active WebSockets were terminated.
ASTERISK-28585
Change-Id: I85c71ab112f99875b586419a34c08c8b34c14c5c
During execution "pjsip show channelstats" cli command by an
external module asterisk crashed. It seems this is a separate
thread running to fetch and print rtp stats. The crash happened on
the ao2_lock method, just before it going to read the rtp stats on
a rtp instance. According to gdb backtrace log, it seems the
session media was already cleaned up at that moment.
ASTERISK-28578
Change-Id: Ia918bfa3c8119060633e39b14852e8d983e0417e
If you specify multiple formats in voicemail.conf, eg. "format = gsm|wav"
and are using realtime ODBC backend, only the first format gets stored
in the database. So when you forward a message later on, there is a bug
generating the email, related to the stored format (GSM) being different
than the desired email format (WAV) specified for the user. Sox can
handle this, but Asterisk needs to tell sox exactly what to do.
ASTERISK-22192
Change-Id: I7321e7f7e7c58adbf41dd4fd7191c887b9b2eafd
PostgreSQL 12 finally removed column adsrc from table pg_catalog.pg_attrdef
(column default values), which has been deprecated since version 8.0.
Since then, the official/correct/supported way to retrieve the column
default value from the catalog is function pg_catalog.pg_get_expr().
This change breaks compatibility with pre-8.0 PostgreSQL servers,
but has reached end-of-support more than a decade ago.
cdr_pgsql and res_config_pgsql still have support for pre-7.3
servers, but cleaning that up is perhaps a topic for a major release,
not this bugfix.
ASTERISK-28571
Change-Id: I834cb3addf1937e19e87ede140bdd16cea531ebe
Fixes a failure in /main/taskprocesor unit test, only occurring in Ubuntu.
Newer versions of GCC require variable initialization.
Change-Id: I2994d8aab9307a8c2c7330584f287a27144a580c
Benjamin Keith Ford
Friendly Automation
George Joseph
Kevin Harwell
Sean Bright
Frederic LE FOLL
lvl
Alexei Gradinari
Martin Tomec
Joshua Colp
Michael Cargile
Salah Ahmed
cmaj
Christoph Moench-Tegeder
csavinovich