* ACO options
* Indications
* Module loader ref_debug object
* Media index info and variants
* xmldoc items
These allocation locations were identified using reflocks.py on the
master branch.
Change-Id: Ie999b9941760be3d1946cdb6e30cb85fd97504d8
When a module reload fails we never set AST_MODULE_RELOAD_ERROR. This
caused reload failures to incorrectly report 'No module found'.
Change-Id: I5f3953e0f7d135e53ec797f24c97ee3f73f232e7
* Display list of unavailable dependencies when they cause another
module to fail loading.
* When a module declines to load find all modules which depend on it so
they can be declined and listed together.
* Prevent retry of declined modules during startup.
* When a module fails to dlopen try loading it with RTLD_LAZY so we can
attempt to display the list of missing dependencies.
These changes are meant to reduce logger spam that is caused when a
module has many dependencies and declines to load. This also fixes some
error paths which failed to recognize required modules.
Module load/start errors are delayed until the end of loader startup.
Change-Id: I046052c71331c556c09d39f47a3b92975f3e1758
Declining the queue_member_status_type stasis message in stasis.conf
causes these messages to leak json objects.
* Add missing ast_json_unref() if the type is NULL in
queue_publish_member_blob().
ASTERISK-28084
Change-Id: I691ecf49bd1f7d9c29182e1eee8c4bb7103be9fc
CLI command 'pjsip show contacts' inefficiently make a lot of DB requests.
For example if there are 10k aors then asterisk requests these 10k records
of aor and then does 10k requests of contact - one request per aor.
Even if use 'like <pattern>' the asterisk requests all aor's and contact's
records and then filters them by itself.
This patch gathers contact's container by
- retrieving all dynamic contacts by regex (filtered by reg_server)
- retrieving all aors with permanent contacts
- finally filters container by regex
ASTERISK-28077 #close
Change-Id: Id0ad65d14952a02fb213273a90f3f680a8149618
Add a volatile flag to lock tracking structures so we only need to use
the global lock when first initializing tracking.
Additionally add support for DEBUG_THREADS_LOOSE_ABI. This is used by
astobj2.c to eliminate storage for tracking fields when DEBUG_THREADS is
not defined.
Change-Id: Iabd650908901843e9fff47ef1c539f0e1b8cb13b
The first attempt at publishing confbridge events to participants
involved publishing them at the same time stasis events were
created. This caused issues with bridge and channel locks. The
second attempt involved publishing them when the stasis events
were received by the code that published the confbridge AMI events.
This caused timing issues because, depending on resources available,
the event could be received before channels actually joined the
bridge and would therefore fail to send messages to the participant.
This attempt reverts to the original mechanism with one exception.
The join and leave events are published via bridge join and leave
hooks. This guarantees the states of the channels and bridge and
provides deterministic timing for event publishing.
Change-Id: I2660074f8a30a5224cb953d5e047ee84484a9036
Reduce options to 2-bit field, magic to 30 bit field. Move ref_counter
next to options and explicitly use int32_t so the fields will pack.
This reduces memory overhead for every ao2 object by 8 bytes on x86_64.
Change-Id: Idc1baabb35ec3b3d8de463c4fa3011eaf7fcafb5
* In main/config.c, AST_INCLUDE_GLOB is fixed to '1' making the #ifdefs
pointless.
* In utils/extconf.c, AST_INCLUDE_GLOB is never defined so there is a
lot of dead code.
Change-Id: I1bad1a46d7466ddf90d52cc724e997195495226c
When REF_DEBUG and AO2_DEBUG are both enabled we closed the refs log
before we shutdown astobj2_container. This caused the AO2_DEBUG
container registration container to be reported as a leak.
Change-Id: If9111c4c21c68064b22c546d5d7a41fac430430e
This issue related to setting of holdtime, announcements, member delays.
It works well if we set the member delays to "0" and no announcements
and no holdtime.This issue will happen if we set member delays to "1",
"2"... or announcements or holdtime and hangs up the call during
processing it.
And here is the reason:
(At the step of answering a phone.)
It takes care any holdtime, announcements, member delays,
or other options after a call has been answered if it exists.
Normally, After the call has been aswered,
and we wait for the processing one of the cases of the member delays
or hold time or announcements finished, "if (ast_check_hangup(peer))"
will be not executed, then queue will be updated at update_queue().
Here, pending member will be removed.
However, after the call has been aswered,
if we hangs up the call during one of the cases of the member delays
or hold time or announcements, "if (ast_check_hangup(peer))"
will be executed.
outgoing = NULL and at hangupcalls, pending members will not be removed.
* This fixed patch will remove the pending member from container
before hanging up the call with outgoing is NULL.
ASTERISK-27920
Reported by: Cao Minh Hiep
Tested by: Cao Minh Hiep
Change-Id: Ib780fbf48ace9d2d8eaa1270b9d530a4fc14c855
Fixed an issue that resulted in "Allocation failed" each time an ARI
request was made to start playing MOH on a bridge.
In bridge_moh_create() we were attaching the after bridge callbacks to
chan which is the ;1 channel of the unreal channel pair. We should have
attached them to the ;2 channel which is pushed into the bridge by
ast_unreal_channel_push_to_bridge(). The callbacks are called when the
specific channel leaves the bridging system. Since the ;1 channel is
never put into a bridge the callbacks never get called. The callbacks
then never remove the moh_wrapper from the app_bridges_moh container. As
a result we cannot find the channel associated with the wrapper to start
MOH because it has hungup. This is the reason causing the reported issue.
* Rather than using after bridge callbacks to cleanup, we now have
moh_channel_thread() doing the cleanup when the channel hangs up.
* Fixed moh_channel_thread() accumulating control frames on the stasis
bridge MOH channel until MOH is stopped. Control frames are no longer
accumulated while MOH is playing.
* Fixed channel ref counting issue. stasis_app_bridge_moh_channel() may
or may not return a channel ref. As a result ast_ari_bridges_start_moh()
wouldn't know it may have a channel ref to release.
stasis_app_bridge_moh_channel() will now return a ref with the channel it
returns.
* Eliminated RAII_VAR in bridge_moh_create().
ASTERISK-26094 #close
Change-Id: Ibff479e167b3320c68aaabfada7e1d0ef7bd548c
When networks experience disruptions, there can be large gaps of time
between receiving packets. When strictrtp is enabled, this created
issues where a flood of packets could come in and be seen as an attack.
Another option - seqno - has been added to the strictrtp option that
ignores the time interval and goes strictly by sequence number for
validity.
Change-Id: I8a42b8d193673899c8fc22fe7f98ea87df89be71
On SQL error there is not diagnostic information about this error.
There is only
WARNING res_odbc.c: SQL Execute error -1!
The function ast_odbc_print_errors calls a SQLGetDiagField to get the number
of available diagnostic records, but the SQLGetDiagField returns 0.
However SQLGetDiagRec could return one diagnostic records in this case.
Looking at many example of getting diagnostics error information
I found out that the best way it's to use only SQLGetDiagRec
while it returns SQL_SUCCESS.
Also this patch adds calls of ast_odbc_print_errors on SQL_ERROR
to res_config_odbc.
ASTERISK-28065 #close
Change-Id: Iba5ae5470ac49ecd911dd084effbe9efac68ccc1
With tls and udp enabled asterisk generates a warning about sending
message via udp instead of tls.
sip notify command via cli works as expected and without warning.
asterisk has to set the connection information accordingly to connection
and not on presumption
ASTERISK-28057 #close
Change-Id: Ib43315aba1f2c14ba077b52d8c5b00be0006656e
In order to do this and provide good feedback, a new macro was
created (AST_EXT_LIB_EXTRA_CHECK) which does the normal check and
path setups for the library then compiles, links and runs a supplied
code fragment to do the final determination. In this case, the
final code fragment compares UNBOUND_VERSION_MAJOR
and UNBOUND_VERSION_MINOR to determine if they're greater than or
equal to 1.5.
Since we require version 1.5, some code in res_resolver_unbound
was also simplified.
ASTERISK-28045
Reported by: Samuel Galarneau
Change-Id: Iee94ad543cd6f8b118df8c4c7afd9c4e2ca1fa72
This change raises a testsuite event to provide what port
Asterisk has actually allocated for RTP. This ensures that
testsuite tests can remove any assumption of ports and instead
use the actual port in use.
ASTERISK-28070
Change-Id: I91bd45782e84284e01c89acf4b2da352e14ae044
Use json_vsprintf from versions which contain fix for va_copy leak.
Apply fixes from jansson master:
* va_copy leak fix.
* Avoid potential invalid memory read in json_pack.
* Rename variable that shadowed another.
Change-Id: I7522e462d2a52f53010ffa1e7d705c666ec35539
* Use "o*" format specifier for optional fields in ast_json_party_id.
* Stop using ast_json_deep_copy on immutable objects, it is now thread
safe to just use ast_json_ref.
Additional changes to ast_json_pack calls in the vicinity:
* Use "O" when an object needs to be bumped. This was previously
avoided as it was not thread safe.
* Use "o?" and "O?" to replace NULL with ast_json_null(). The
"?" is a new feature of ast_json_pack starting with Asterisk 16.
Change-Id: I8382d28d7d83ee0ce13334e51ae45dbc0bdaef48
George Joseph
Joshua Colp
Corey Farrell
Richard Mudgett
Jenkins2
Alexei Gradinari
Kevin Harwell
Sean Bright
Cao Minh Hiep
Moritz Fain
Ben Ford
pk16208