There are reports that this commit causes deadlocks when issuing
a "pri show" CLI command and a channel is in the process of being
hung up. Further work is in progress to determine the cause of
the deadlock and provide a permanent fix.
ASTERISK~28605 #keeping open
Reported by: Dirk Wendland
This reverts commit c6b17b5212.
Change-Id: Iddd900c1abdd5074ff39c17cdce855f2f436cef9
In Asterisk 16+, there are a few places in ast_rtp_read where we've
allocated a frame list but return a null frame instead of the list.
In these cases, any frames left in the list won't be freed. In the
vast majority of the cases, the list is empty when we return so
there's nothing to free but there have been leaks reported in the
wild that can be traced back to frames left in the list before
returning.
The escape paths now all have logic to free frames left in the
list.
ASTERISK-28609
Reported by: Ted G
Change-Id: Ia1d7075857ebd26b47183c44b1aebb0d8f985f7a
Instead of trying to use the defined MySQL client version from the
header use a configure check to determine whether the bool or my_bool
type should be used for defining a boolean.
ASTERISK-28604
Change-Id: Id2225b3785115de074c50c123ff1a68005b4a9c7
A previous review, 13174, made a change whereby on an incoming offer SDP
the pending topology was initialized to the configured. This caused a problem
for bundle with WebRTC where bundle could reference a stream that did not
actually exist if the configuration had both audio and video but the
offer SDP only contained audio.
This change undoes that review and instead fixes the original problem it
sought to solve by setting the state of created streams based on the
contents of the offer SDP. This way the stream state is not inactive
until negotiation later completes.
ASTERISK-28659
Change-Id: Ic5ae5a86437d3e686ac5afd91d133cc916198355
This reverts commit 174e6426aa.
Reason for revert: Regression in XML validation.
validity error : Content model of enumlist is not determinist:
(configOptionToEnum | (configOptionToEnum , enum+) | enum+)
As we are preparing to do releases and this is not critical
I am reverting this for now until resolved.
Change-Id: I2c9656fb40b2d2f56f54caa35c8be02cc92babd0
The simple fix here is simply to NULL out username and password after we call
ast_free on them. Unfortunately, I noticed that we weren't checking for
allocation failures for username and password, and adding those checks made
things noisy and cumbersome.
So instead we partially rollback the recent LGTM patch, and move the alloca
calls into find_aor_name().
ASTERISK-28641 #close
Reported by: Ross Beer
Change-Id: Ic9d01624e717a020be0b0aee31f0814e7f1ffbe2
We're appropriately sizing the id_domain_alias buffer, but then copying the data
into the id_domain one. We were then using the uninitialized id_domain_alias
buffer we just allocated.
This is ASTERISK~28641 adjacent, but significant enough to warrant its own
patch.
Change-Id: I81c38724d18deab8c6573153e2b99dbb6e2f33d9
We need to copy the endpoint name before we call ao2_cleanup() on it,
otherwise we might try to access memory that has been reclaimed.
ASTERISK-28445 #close
Reported by: Bernhard Schmidt
Change-Id: I404b952608aa606e0babd3c4108346721fb726b3
The problem is essentially the same as in ASTERISK~28245. Besides
the direct media scenario we have an additional scenario where a
special client is involved. This device mutes audio by default in
transmit direction (no rtp frames) and activates audio only by a
foot switch. In this situation dtmf input (pin for conferences,
transfer features codes , etc) using SIP INFO mode is not
understood properly especially when SIP INFO messages are sent
quickly.
This patch ensures that SIP INFO frames are properly queued and
processed in the above scenario. The patch also corrects situations
where successive dtmf events are received quicker than the
signalled event duration (plus minimum gap/pause) allows, i.e. DTMF
events have to be buffered in the ast channel read queue and
emulation has to be processed asynchronously at slower speed.
Reported by: Thomas Arimont
patches:
trigger_dtmf_emulation.patch submitted by Thomas Arimont (license 5525)
Change-Id: I309bf61dd065c9978c8e48f5b9a936ab47de64c2
During capabilities selection (joint capabilities of us and peer,
configured capability for this peer, or general configured
capabilities), if sip_new() does not keep framing information,
then directmedia activation will fail for any framing different
from default framing.
ASTERISK-28637
Change-Id: I99257502788653c2816fc991cac7946453082466
* Use ast_cli_completion_add() to improve performance when large number of
cached items are present.
* Only complete one URI for commands that only accept a single URI.
* Change command documentation to wrap at 80 characters to improve
readability.
Change-Id: Iedb0a2c3541e49561bc231dca2dcc0ebd8612902
if asterisk offer T38 SDP with none error correction scheme and
the endpoint respond with redundancy EC scheme, asterisk switch
to that mode. Since we configure the endpoint as none EC mode
we should not switch to any other mode except none.
following logic implemented in code.
1. If asterisk offer none, and anything except none in answer
will be ignored.
2. If asterisk offer fec, answer with fec, redundancy and none will
be accepted.
3. If asterisk offer redundancy, answer with redundancy and none
will be accepted.
ASTERISK-28621
Change-Id: I343c62253ea4c8b7ee17abbfb377a4d484a14b19
If the name of a peer is known and a SIP request is sent using that
peer's name, the address of the peer will change even if the request
fails the authentication challenge. This means that an endpoint can
be altered and even rendered unusuable, even if it was in a working
state previously. This can only occur when the nat option is set to the
default, or auto_force_rport.
This change checks the result of authentication first to ensure it is
successful before setting the address and the nat option.
ASTERISK-28589 #close
Change-Id: I581c5ed1da60ca89f590bd70872de2b660de02df
If an AMI user without the "system" authorization calls the
Originate AMI command with the Originate application,
the second Originate could run the "System" command.
Action: Originate
Channel: Local/1111
Application: Originate
Data: Local/2222,app,System,touch /tmp/owned
If the "system" authorization isn't set, we now block the
Originate app as well as the System, Exec, etc. apps.
ASTERISK-28580
Reported by: Eliel Sardañons
Change-Id: Ic4c9dedc34c426f03c8c14fce334a71386d8a5fa
The original clone depth of 10 was causing the need to rebase
changes whose parent was older than the 10 commits. The clone
depth has been increased to 100.
Workspace cleanup was only happening for successful builds which
wasn't enough to keep the 8G workspace in-memory drives on the
docker slaves from filling up. Now the workspaces are cleaned up
after every build regardless of success/failure. If you need to
preserve builds temporarily, you can log into Jenkins/Manage
Jenkins/Configure System and change the CLEANUP_WS_* environment
variable for the job type you're troubleshooting to "FALSE".
Change-Id: I0d7366e87cea714e5dbc9488caf718802fce75ca
Fixes: error: ‘domain_name’ may be used uninitialized in this function
Found with gcc (Ubuntu 9.2.1-9ubuntu2) 9.2.1 20191008
Change-Id: I44413b49ea1205aa25538142161deb73883c79e8
Asterisk Development Team
Friendly Automation
George Joseph
Joshua C. Colp
Joshua Colp
Kevin Harwell
Sean Bright
Walter Doekes
Frederic LE FOLL
Salah Ahmed
Ben Ford
Pascal Cadotte Michaud