If an AMI user without the "system" authorization calls the
Originate AMI command with the Originate application,
the second Originate could run the "System" command.
Action: Originate
Channel: Local/1111
Application: Originate
Data: Local/2222,app,System,touch /tmp/owned
If the "system" authorization isn't set, we now block the
Originate app as well as the System, Exec, etc. apps.
ASTERISK-28580
Reported by: Eliel Sardañons
Change-Id: Ic4c9dedc34c426f03c8c14fce334a71386d8a5fa
(cherry picked from commit 1b9281a5de)
If the name of a peer is known and a SIP request is sent using that
peer's name, the address of the peer will change even if the request
fails the authentication challenge. This means that an endpoint can
be altered and even rendered unusuable, even if it was in a working
state previously. This can only occur when the nat option is set to the
default, or auto_force_rport.
This change checks the result of authentication first to ensure it is
successful before setting the address and the nat option.
ASTERISK-28589 #close
Change-Id: I581c5ed1da60ca89f590bd70872de2b660de02df
(cherry picked from commit c2279540ba)
Issues in pjproject 2.9 caused us to revert some of their changes
as a work around. This introduced another issue where pjproject
wouldn't build with older gcc versions such as that found on
CentOS 6. This commit replaces the reverts with the official
fixes for the original issues and allows pjproject to be built
on CentOS 6 again.
ASTERISK-28574
Reported-by: Niklas Larsson
Change-Id: I06f8507bea553d1a01b0b8874197d35b9d47ec4c
(cherry picked from commit cb6e0d36ae)
When creating an unsolicited MWI aggregate subscription it was possible for
the subscription object to be double unref'ed. This patch removes the explicit
unref as it is not needed since the RAII_VAR will handle it at function end.
Less concerning there was also a bug that could potentially allow the aggregate
subscription object to be added to the unsolicited container twice. This patch
ensures it is added only once.
ASTERISK-28575
Change-Id: I9ccfdb5ea788bc0c3618db183aae235e53c12763
We've found a connection re-use regression in pjproject 2.9
introduced by commit
"Close #1019: Support for multiple listeners."
https://trac.pjsip.org/repos/changeset/6002https://trac.pjsip.org/repos/ticket/1019
Normally, multiple SSL requests should reuse the same connection
if one already exists to the remote server. When a transport
error occurs, the next request should establish a new connection
and any following requests should use that same one. With this
patch, when a transport error occurs, every new request creates
a new connection so you can wind up with thousands of open tcp
sockets, possibly exhausting file handles, and increasing memory
usage.
Reverting pjproject commit 6002 (and related 6021) restores the
expected behavior.
We also found a memory leak in SSL processing that was introduced by
commit
"Fixed #2204: Add OpenSSL remote certificate chain info"
https://trac.pjsip.org/repos/changeset/6014https://trac.pjsip.org/repos/ticket/2204
Apparently the remote certificate chain is continually recreated
causing the leak.
Reverting pjproject commit 6014 (and related 6022) restores the
expected behavior.
Both of these issues have been acknowledged by Teluu.
ASTERISK-28521
Change-Id: I8ae7233c3ac4ec29a3b991f738e655dabcaba9f1
When a stale item was being updated the object was being retrieved, but its
reference was not being decremented after the update. This patch makes it so
the object is now appropriately de-referenced.
ASTERISK-28523
Change-Id: I9d8173d3a0416a242f4eba92fa0853279c500ec7
When fax detection occurs on an outbound PJSIP channel the
redirect operation will result in a masquerade occurring and
the underlying channel on the session changing. The code
incorrectly relocked the new channel instead of the old
channel when returning. This resulted in the new channel
being locked indefinitely. The code now always acts on the
expected channel.
ASTERISK-28538
Change-Id: I2b2e60d07e74383ae7e90d752c036c4b02d6b3a3
On FreeBSD using the clang/llvm compiler build fails to build due
to the switch statement argument being a non integer type expression.
Switch to an if/else if/else construct to sidestep the issue.
ASTERISK-28536 #close
Change-Id: Idf4a82cc1e94580a2d017fe9e351c226f23e20c8
This fix allows a realtime moh class to be unregistered from the command
line. This is useful when the contents of a directory referenced by a
realtime moh class have changed.
The realtime moh class is then reloaded on the next request and uses the
new directory contents.
ASTERISK-17808
Change-Id: Ibc4c6834592257c4bb90601ee299682d15befbce
The Channel resource has a new sub-resource "externalMedia".
This allows an application to create a channel for the sole purpose
of exchanging media with an external server. Once created, this
channel could be placed into a bridge with existing channels to
allow the external server to inject audio into the bridge or
receive audio from the bridge.
See https://wiki.asterisk.org/wiki/display/AST/External+Media+and+ARI
for more information.
Change-Id: I9618899198880b4c650354581b50c0401b58bc46
When the remote ISDN party ends an ISDN call on a PRI link
(DISCONNECT), CHANNEL(hangupsource) information is not available.
chan_dahdi already contains an ast_set_hangupsource() in
__dahdi_exception() function but it seems that ISDN message processing
does not use this part of code.
Two other channel modules associate ast_queue_hangup() and
ast_set_hangupsource() functions calls:
- chan_pjsip in chan_pjsip_session_end() function,
- chan_sip in sip_queue_hangup_cause() function.
chan_iax2 separates them, in iax2_queue_hangup()/iax2_destroy() and
set_hangup_source_and_cause().
Thus, I propose to add ast_set_hangupsource() beside
ast_queue_hangup() in sig_pri_queue_hangup(), like chan_pjsip and
chan_sip already do.
ASTERISK-28525
Change-Id: I0f588a4bcf15ccd0648fd69830d1b801c3f21b7c
ChanIsAvail() creates a temporary channel with ast_request() to test
resource availability. It should not generate a CDR when it hangs up
this temporary channel.
This patch disables CDR generation for the temporary channel with
ast_cdr_set_property().
ASTERISK-28527
Change-Id: I7b0555c6909c7d322e452dde97c9ea5b111552d1
This change removes the assumption that a frame will always have
a src set on it. This assumption is incorrect.
Given a scenario where an RTP packet is received with no payload
the resulting audio frame will have no samples. If this frame goes
through a signed linear translation path an interpolated frame can
be created (if generic packet loss concealment is enabled) that has
minimal data on it, including no src. If this frame is given to a
translation path a crash will occur due to the lack of src.
ASTERISK-28499
Change-Id: I024d10dd98207eb8a6b35b59880bcdf1090538f8
After receiving a 200 OK with a declined stream in response to a T.38
initiated re-invite Asterisk would crash when attempting to dereference
a NULL session media object.
This patch checks to make sure the session media object is not NULL before
attempting to use it.
ASTERISK-28495
patches:
ast-2019-004.patch submitted by Alexei Gradinari (license 5691)
Change-Id: I168f45f4da29cfe739acf87e597baa2aae7aa572
Module res_adsi.so is deprecated, therefore it does not load by default.
Module not loaded causes it to yield a FAIL when tested by tests/test_utils.c.
This fix checks if the corresponding module is loaded at the start of the test,
and if not, it passes the test and exits with a message.
This fix is applied to all versions where the module is marked deprecated.
Change-Id: I52be64c8f6af222e15148a856d1f10cb113e1e94
On reading information about initial client packet unistim use dirty
implementation of destination ip address retrieval. This fix uses
CMSG_*(..) to get ip address and make clang compile without warning.
ASTERISK-25592 #close
Reported-by: Alexander Traud
Change-Id: Ic1fd34c2c2bcc951da65bf62e3f7a8adff8351b1
res_pjsip_mwi allows both solicited and unsolicited MWI subscription types.
While both can be set in the configuration for a given endpoint/aor, only
one is allowed. Precedence is given to unsolicited. Meaning if an endpoint/aor
is configured to allow both types then the solicited subscription is rejected
when it comes in. However, there is a configuration option to override that
behavior:
mwi_subscribe_replaces_unsolicited
When set to "yes" then when a solicited subscription comes in instead of
rejecting it Asterisk is suppose to replace the unsolicited one if it exists.
Prior to this patch there was a bug in Asterisk that allowed the solicted one
to be added, but did not remove the unsolicited. As a matter of fact a new
unsolicited subscription got added everytime a SIP register was received.
Over time this eventually could "flood" a phone with SIP notifies.
This patch fixes that behavior to now make it work as expected. If configured
to do so a solicited subscription now properly replaces the unsolicited one.
As well when an unsubscribe is received the unsolicited subscription is
restored. Logic was also put in to handle reloads, and any configuration changes
that might result from that. For instance, if a solicited subscription had
previously replaced an unsolicited one, but after reload it was configured to
not allow that then the solicited one needs to be shutdown, and the unsolicited
one added.
ASTERISK-28488
Change-Id: Iec2ec12d9431097e97ed5f37119963aee41af7b1
Current implementation of ast_channel_tech send_digit_begin hook uses
same function for tone playback as key press handler. This cause every
incoming dtmf send back to asterisk. In case of two unistim phones
connected to each other, it'll cause indefinite DTMF loop. Fix add
separate function for dtmf tone phone play.
Change-Id: I5795db468df552f0c89c7576b6b3858b26c4eab4
This patch fixes one-way oudio that users expirienced on
big-endian architechtires. RTP port number bytes was stored
in improper order and phone sent RTP to wrong RTP port.
Reported-by: Andrey Ionov
Change-Id: I9a9ca7f26e31a67bbbceff12923baa10dfb8a3be
The UnicastRTP channel driver provided by chan_rtp now accepts
"<hostname>:<port>" as an alternative to "<ip_address>:<port>"
in the destination. The first AAAA (preferred) or A record resolved
will be used as the destination. The lookup is synchronous so beware
of possible dialplan delays if you specify a hostname.
Change-Id: Ie6f95b983a8792bf0dacc64c7953a41032dba677
The new function takes in a pointer to an ast_sockaddr structure,
a hostname and an optional port and then dispatches parallel
"AAAA" and "A" record queries. If an "AAAA" record is returned,
it's parsed into the ast_sockaddr structure along with the port
if it was supplied. If no "AAAA" record was returned, the
first "A" record returned (if any) is parsed instead.
This is a synchronous call. If you need asynchronous lookups,
use ast_dns_query_set_resolve_async and roll your own.
Change-Id: I194b0b0e73da94b35cc35263a868ffac3a8d0a95
Asterisk Development Team
Benjamin Keith Ford
George Joseph
Friendly Automation
Kevin Harwell
Joshua Colp
Guido Falsi
sungtae kim
Sean Bright
Frederic LE FOLL
Chris-Savinovich
Igor Goncharovsky
Alexei Gradinari