Recently code accessing nochecksums variable has been added without including #ifdef SO_NO_CHECK protection, while the variable is created only when such constant is defined.
ASTERISK-28852 #close
Change-Id: I381718893b80599ab8635f2b594a10c1000d595e
Fixed it to copy the entire string from the requested endpoint body except tech-prefix.
ASTERISK-28847
Change-Id: I91b5f6708a1200363f3267b847dd6a0915222c25
By using pjproject to give us a list of candidates, and then filtering,
if the host has >32 addresses configured, then it is possible that we
end up filtering out all 32 of those, and ending up with no candidates
at all. Instead, get getifaddrs (which pjsip is using underlying
anyway) to retrieve all local addresses, and iterate those, adding the
first 32 addresses not excluded by the ICE ACL.
In our setup at any point in time We've got between 6 and 328 addresses
on any given system. The lower limit is the lower limit but the upper
limit is growing on a near daily basis currently.
Change-Id: I109eaffc3e2b432f00bf958e3caa0f38cacb4edb
Signed-off-by: Jaco Kroon <jaco@uls.co.za>
The Python/C API is used only if the Test Framework was enabled in Asterisk
'make menuselect'. The Test Framework is available only if the Developer Mode
was enabled in Asterisk './configure --enable-dev-mode'. And that Python/C API
is used only if the PJProject was found and not disabled in Asterisk; the user
did not go for './configure --without-pjproject'.
Furthermore, because version 2 of that Python/C API is required (currently) and
because some platforms do not offer a generic version 2, the script searches
for 2.7 explicitly as well.
To avoid version mismatch between the Python/C API and the Python environment,
the script searches for the latter in the same versions, in the same the order
as well. Because this Python/C API is just for (some) Asterisk contributors,
the script also goes for the Python 3 environment as a last resort for all
other Asterisk users. This allows 'make full' even on minimal installations of
Ubuntu 18.04 LTS and newer.
Because the Python/C API is Asterisk contributor specific, the Python packages
are removed from the script './contrib/scripts/install_prereq' as this script
is intended for Asterisk users. Asterisk contributors have to install much more
packages in any case, like:
sudo apt install autoconf automake git git-review python2.7-dev
ASTERISK-28824
ASTERISK-27717
Change-Id: Id46d357e18869f64dcc217b8fdba821b63eeb876
It is possible to configure a TCP/TLS client without having a TCP/TLS
server. In that case, no error or warning was printed but the headers
Contact and Via in SIP REGISTER were "(null)".
ASTERISK-28798
Change-Id: I387ca5cb6a65f1eb675a29c5e41df8ec6c242ab2
If chan_pjsip is configured for DTMF_RFC_4733, and the core triggers a
digit begin before media, or rtp has been setup then it's possible the
outgoing channel will hear a constant DTMF tone upon answering.
This happens because when there is no media, or rtp chan_pjsip notifies
the core to initiate inband DTMF. However, upon digit end if media, and
rtp become available then chan_pjsip does not notify the core to stop
inband DTMF. Thus the tone continues playing.
This patch makes it so chan_pjsip only notifies the core to start
inband DTMF in only the required cases. Now if there is no media, or
rtp availabe upon digit begin chan_pjsip does nothing, but tells the
core it handled it.
ASTERISK-28817 #close
Change-Id: I0dbea9fff444a2595fb18c64b89653e90d2f6eb5
The following fields return an error when read from dialplan:
- exten
- context
- userfield
- channame
ASTERISK-28796 #close
Change-Id: Ieacaac629490f8710fdacc9de80ed5916c5f6ee2
This reverts commit a3a2fbaec6.
Reason for revert: There is a lot of code that relies on the broken
behavior that this fixes.
Change-Id: I410c395a0168acbdaf89e616e3cb5e1312d190cb
When an AOR is modified endpoints are updated that reference
the AOR so they can start receiving updates and reflect the
correct state. If this is the case then we shouldn't change
the endpoint to be offline if it does not reference the AOR
but instead only when the endpoint is completely updated for
all its AORs.
ASTERISK-28056
patches:
pjsip_options-aor.diff submitted by jhord (license 6978)
Change-Id: I3ee00023be2393113cd4e056599f23f3499ef164
The dial application had 80 characters of destination length
limitation. But this limitation causes unexpected dial string
cut if the dial string is long.
Removed unnecessary limited buffer to support longer dial
destination.
ASTERISK-27946
Change-Id: I72c8f0319a4b47e8180817a66a7e9bde063cb330
RFC5621 requires any content type with a Content-Disposition
with handling=required to be rejected with a 415 response
ASTERISK-28782 #close
Change-Id: Iad969df75936730254b95c1a8bc3b48497070bb4
named_acl.c (which is really a named_ha) now uses ast_ha_output.
I've also updated main/manager.c to output the actual ACL on "manager
show user <username>" if one is set. If this works then we can add
similar to other modules as required.
Change-Id: I0ec9876a90dddd379c80ec078d48e3ee6991eb0f
This patch makes it so ast_coredumper now outputs the following information to
a *-info.txt file when processing a core file:
asterisk version and "built by" string
BUILD_OPTS
system start, and last reloaded date/time
taskprocessor list
equivalent of "bridge show all"
equivalent of "core show channels verbose"
Also a slight modification was made when trying to obtain the pid(s) of a
running Asterisk. If it fails to retrieve any it now reports an error.
Change-Id: I54f35c19ab69b8f8dc78cc933c3fb7c99cef346b
This fixes ast_addressfamily_to_sockaddrsize to reference the
provided argument, and ast_sockaddr_from_sockaddr to not use the name of
a structure as argument.
Change-Id: Ibf5db469c47c3b4214edf8456326086174e8edd7
If a negative (error) return is received from dundi_lookup_internal,
this is not handled correctly when assigning the result to the buffer.
As such, use a signed integer in the assignment and do a proper
comparison.
ASTERISK-21205
Change-Id: I5214ebb6491e2bd14f90c7d3ce229da86888f739
When the Asterisk receives 200 OK with invalid SDP,
the Asterisk/PJPROJECT terminating the session.
But if the channel was in the Bridge, Asterisk tries send
the Re-Invite before terminating the session.
And when the Asterisk sending the Re-Invite, it doesn't check
the SDP is NULL or not. This crashes the Asterisk.
Fixed it to close the session correctly if the UAS sends the
200 OK with wrong SDP.
ASTERISK-28743
Change-Id: Ifa864e0e125b1a7ed2f3abd4164187e1dddc56da
This patch has been included in Gentoo distribution for at least since
asterisk 1.8, but there are references in the logs going back as far as
1.0.0 - not sure if this is still required in any way, it does apply,
and it doesn't (as far as we can determine) cause build failures.
Change-Id: I46d8845e30200205e80580680bf060aa3012ba54
We (Gentoo distribution) reckon that in the case of multiple versions of
gmime installed we should prefer the newest one.
Change-Id: Idf7be613230232eb1d573d93c4a5a8297f4ecd2d
Do not hang up a PJSIP channel on RTP timeout if that channel is in
a direct-media bridge. Also reset the time of the last received RTP packet when
direct-media ends (wait full rtp_timeout period before checking first time after
audio came back to Asterisk).
ASTERISK-28774
Reported-by: Michael Neuhauser
Change-Id: I8b62012be7685849e8fb2b1c5dd39d35313ca2d1
Asterisk Development Team
Guido Falsi
sungtae kim
DanielYK
Alexander Traud
bernard merindol
Jean Aunis
Jaco Kroon
Kevin Harwell
Sebastien Duthil
Sean Bright
Joshua C. Colp
Torrey Searle
Michael Neuhauser