26572 Commits (e5499c32336d80af86fa1ebac9ca36b3718d77db)

 

All Branches   

Search

Author	SHA1	Message	Date
Matt Jordan	e5499c3233	Merge "sorcery: Add ast_sorcery_object_unregister() API call." into 13	10 years ago
Matt Jordan	dc067e585f	Merge "res_pjsip_outbound_registration.c: Reorder load_module() and unload_module()." into 13	10 years ago
Matt Jordan	71c1c559cf	Merge "AMI: Add Linkedid to the standard channel snapshot AMI event headers." into 13	10 years ago
Mark Michelson	028fa54620	res_pjsip_nat: Rewrite route set when required. ... When performing some provider testing, the rewrite_contact option was interfering with proper construction of a route set when sending an ACK after receiving a 200 OK response to an INVITE. The initial INVITE was sent to address sip:foo. The 200 OK had a Contact header with URI sip:bar. In addition, the 200 OK had Record-Route headers for sip:baz and sip:foo, in that order. Since the Record-Route headers had the lr parameter, the result should have been: * Set R-URI of the ACK to sip:bar. * Add Route headers for sip:foo and sip:baz, in that order. However, the rewrite_contact option resulted in our rewriting the Contact header on the 200 OK to sip:foo. The result was: * R-URI remained sip:foo. * We added Route headers for sip:foo and sip:baz, in that order. The result was that sip:bar was not indicated in the ACK at all, so the far end never received our ACK. The call eventually dropped. The intention of rewrite_contact is to rewrite the most immediate destination of our SIP request to be the same address on which we received a request or response. In the case of processing a SIP response with Record-Route headers, this means that instead of rewriting the Contact header, we should instead rewrite the bottom-most Record-Route header. In the case of processing a SIP request with Record-Route headers, this means we rewrite the top-most Record-route header. Like when we rewrite the Contact header, we also ensure to update the dialog's route set if it exists. ASTERISK-25196 #close Reported by Mark Michelson Change-Id: I9702157c3603a2d0bd8a8215ac27564d366b666f	10 years ago
Richard Mudgett	20f3d77ab9	sorcery: Add ast_sorcery_object_unregister() API call. ... Find and unlink the specified sorcery object type to complement ast_sorcery_object_register(). Without this function you cannot completely unload individual modules that use sorcery for configuration. ASTERISK-24907 Reported by: Kevin Harwell Change-Id: I1c04634fe9a90921bf676725c7d6bb2aeaab1c88	10 years ago
Richard Mudgett	4313f32969	res_pjsip_outbound_registration.c: Reorder load_module() and unload_module(). ... It is best if the loading code creates and initializes the module's infrastructure before letting the system know of its existence. The unloading code needs to reverse the actions of the loading code and in the reverse order. ASTERISK-24907 Reported by: Kevin Harwell Change-Id: I5d151383e9787b5b60aa5e1627b10f040acdded4	10 years ago
Richard Mudgett	890c923786	AMI: Add Linkedid to the standard channel snapshot AMI event headers. ... * The AMI version is bumped to 2.8.0. ASTERISK-25189 #close Reported by: John Hardin Change-Id: I2b1778c3fdc1dca0ed55db4e3a639eddfb16c2ac	10 years ago
Mark Michelson	db0521f905	Merge "res_pjsip_mwi: Set up unsolicited MWI upon registration." into 13	10 years ago
Joshua Colp	61658dd219	Merge "test.c: Add unit test registration checks for summary and description." into 13	10 years ago
Joshua Colp	282b5f3c85	Merge "Unit tests: Fix unit test description strings." into 13	10 years ago
Richard Mudgett	2602a7484b	test.c: Add unit test registration checks for summary and description. ... Added checks when a unit test is registered to see that the summary and description strings do not end with a new-line '\n' for consistency. The check generates a warning message and will cause the /main/test/registrations unit test to fail. * Updated struct ast_test_info member doxygen comments. Change-Id: I295909b6bc013ed9b6882e85c05287082497534d	10 years ago
Richard Mudgett	2b0482d699	Unit tests: Fix unit test description strings. ... Analyzing the code shows that the unit test summary and description strings should not end with a new-line character. Where these strings are used in the code a new-line is provided for output. Change-Id: I129284f5e7ca93d82532334076da4c462d3d9fba	10 years ago
Matt Jordan	f31fb5d54e	Merge "app_dial: Hold reference to calling channel formats when dialing outbound." into 13	10 years ago
Joshua Colp	e99e654d75	app_dial: Hold reference to calling channel formats when dialing outbound. ... Currently when requesting a channel the native formats of the calling channel are provided to the core for usage when dialing the outbound channel. This occurs without holding the channel lock or keeping a reference to the formats. This is problematic as the channel driver may end up changing the formats during this time. In the case of chan_sip this happens when an SDP negotiation completes. This change makes it so app_dial keeps a reference to the native formats of the calling channel which guarantees that they will remain valid for the period of time needed. ASTERISK-25172 #close Change-Id: I2f0a67bd0d5d14c3bdbaae552b4b1613a283f0db	10 years ago
Matt Jordan	6264dbf02d	Merge "res_pjsip_outbound_registration.c: Add missing line endings to CLI commands" into 13	10 years ago
Matt Jordan	b240c3fa63	Merge "res_pjsip_outbound_registration.c: Eliminate simple RAII_VAR() usage." into 13	10 years ago
Matt Jordan	d75d96f57d	Merge "res_pjsip_outbound_registration.c: Misc code cleanups." into 13	10 years ago
Matt Jordan	681790ef01	Merge "bridge.c: Hangup attended transfer target if bridged" into 13	10 years ago
Joshua Colp	80e82dc97f	res_pjsip_mwi: Set up unsolicited MWI upon registration. ... The res_pjsip_mwi previously required a reload to set up the proper subscriptions to allow unsolicited MWI to work. This change makes it so the act of registering will also cause this to occur. This is particularly useful if realtime is involved as no reload needs to occur within Asterisk to cause the MWI information to get sent. ASTERISK-25180 #close Change-Id: Id847b47de4b8b3ab8858455ccc2f07b0f915f252	10 years ago
Kevin Harwell	35a99b6394	bridge.c: Hangup attended transfer target if bridged ... After completing an attended transfer the transfer target channel was not being hung up after leaving the bridge. Added an explicit softhangup to hangup said channel, but only if it was previously bridged. ASTERISK-24782 #close Reported by: John Bigelow Change-Id: Idde9543d56842369384a5e8c00d72a22bbc39ada	10 years ago
Richard Mudgett	036bc0012f	res_pjsip_outbound_registration.c: Add missing line endings to CLI commands ... Change-Id: I39ae612746d892d2dbe86f3ff2d7027fa1da57f7	10 years ago
Richard Mudgett	bec7435945	res_pjsip_outbound_registration.c: Eliminate simple RAII_VAR() usage. ... Change-Id: I399cb9d61bbba706b48c98e0bf75e98984cd9a9e	10 years ago
Richard Mudgett	c2519fdf1c	res_pjsip_outbound_registration.c: Misc code cleanups. ... * Break some long lines. * Fix doxygen comment. Change-Id: I8f12ba6822f84d5e7bb575280270cd7e2fefb305	10 years ago
Alexander Traud	a419c69def	chan_sip: Reload peer without its old capabilities. ... On reload, previously allowed codecs were not removed. Therefore, it was not possible to remove codecs while Asterisk was running. Furthermore, newly added codecs got appended behind the previous codecs. Therefore, it was not possible to add a codec with a priority of #1. This change removes the old capabilities before the current ones are added. ASTERISK-25182 #close Reported by: Alexander Traud patches: asterisk_13_allow_codec_reload.patch uploaded by Alexander Traud (License 6520) Change-Id: I62a06bcf15e08e8c54a35612195f97179ebe5802	10 years ago
Joshua Colp	74616ae43d	chan_sip: Destroy peers without holding peers container lock. ... Due to the use of stasis_unsubscribe_and_join in the peer destructor it is possible for a deadlock to occur when an event callback is occurring at the same time. This happens because the peer may be destroyed while holding the peers container lock. If this occurs the event callback will never be able to acquire the container lock and the unsubscribe will never complete. This change makes it so the peers that have been removed from the peers container are not destroyed with the container lock held. ASTERISK-25163 #close Change-Id: Ic6bf1d9da4310142a4d196c45ddefb99317d9a33	10 years ago
Mark Michelson	9015bb4c8c	Resolve race conditions involving Stasis bridges. ... This resolves two observed race conditions. First, a bit of background on what the Stasis application does: 1a Creates a stasis_app_control structure. This structure is linked into a global container and can be looked up using a channel's unique ID. 2a Puts the channel in an event loop. The event loop can exit either because the stasis_app_control structure has been marked done, or because of some other factor, such as a hangup. In the event loop, the stasis_app_control determines if any specific ARI commands need to be run on the channel and will run them from this thread. 3a Checks if the channel is bridged. If the channel is bridged, then ast_bridge_depart() is called since channels that are added to Stasis bridges are always imparted as departable. 4a Unlink the stasis_app_control from the container. When an ARI command is received by Asterisk, the following occurs 1b A thread is spawned to handle the HTTP request 2b The stasis_app_control(s) that corresponds to the channel(s) in the request is/are retrieved. If the stasis_app_control cannot be retrieved, then it is assumed that the channel in question has exited the Stasis app or perhaps was never in Stasis in the first place. 3b A command is queued onto the stasis_app_control, and the channel's event loop thread is signaled to run the command. 4b While most ARI commands do nothing further, some, such as adding or removing channels from a bridge, will block until the command they issued has been completed by the channel's event loop. The first race condition that is solved by this patch involves a crash that can occur due to faulty detection of the channel's bridged status in step 3a. What can happen is that in step 2a, the event loop may run the ast_bridge_impart() function to asynchronously place the channel into a bridge, then immediately exit the event loop because the channel has hung up. In step 3a, we would detect that the channel was not bridged and would not call ast_bridge_depart(). The reason that the channel did not appear to be bridged was that the depart_thread that is spawned by ast_bridge_impart() had not yet started. That is the thread where the channel is marked as being bridged. Since we did not call ast_bridge_depart(), the Stasis application would exit, and then the channel would be destroyed Then the depart_thread would start up and try to manipulate the destroyed channel, causing a crash. The fix for this is to switch from using ast_channel_is_bridged() to checking the NULLity of ast_channel_internal_bridge_channel() to determine if ast_bridge_depart() needs to be called. The channel's internal bridge_channel is set when ast_bridge_impart() is called and is NULLed by the call to ast_bridge_depart(). If the channel's internal bridge_channel is non-NULL, then the channel must have been imparted into the bridge and needs to be departed, even if the actual bridging operation has not yet started. By departing the channel when necessary, the thread that is running the Stasis application will block until the bridge gives the okay that the depart_thread has exited. The second race condition that is solved by this patch involves a leak of HTTP handler threads. The problem was that step 2b would successfully retrieve a stasis_app_control structure. Then step 2a would exit the channel from the event loop due to a hangup. Steps 3a and 4a would execute, and then finally steps 3b and 4b would. The problem is that at step 4b, when attempting to add a channel to a bridge, the thread would block forever since the channel would never execute the queued command since it was finished with the event loop. This meant that the HTTP handling thread would be leaked, along with any references that thread may have owned (in my case, I was seeing bridges leaked). The fix for this is to hone in better on when the channel has exited the event loop. The stasis_app_control structure has an is_done field that is now set at each point where the channel may exit the event loop. If step 2b retrieves a valid stasis_app_control structure but the control is marked as done, then the attempted operation exits immediately since there will be nothing to service the attempted command. ASTERISK-25091 #close Reported by Ilya Trikoz Change-Id: If66265b73b4c9f8f58599124d777fedc54576628	10 years ago
Mark Michelson	723a9d4225	Parking: Add documentation for AMI ParkedCallSwap event. ... This event was added some time ago in order to clarify when a channel took the place of another channel in a parking lot. However, there was no XML documentation added for the event. This patch adds the XML documentation. ASTERISK-24900 #close Reported by Rusty Newton Change-Id: I4cfe7777c4b94bbff91c9221c6096a7a02a92eac	10 years ago
Joshua Colp	fd21dc34c2	Merge "res_pjsip: Add option to force G.726 to be treated as AAL2 packed." into 13	10 years ago
Corey Farrell	79bf56c78a	func_pjsip_aor: Fix leaked contact from iterator. ... ASTERISK-25162 #close Change-Id: Id79aa3c6fe490016ee98efc97ac4c1d3f461f97e	10 years ago
Kevin Harwell	31c77b157b	res_pjsip: Add option to force G.726 to be treated as AAL2 packed. ... Some phones send g.726 audio packed for AAL2, which differs from what is recommended by RFC 3351. If Asterisk receives audio formatted as such when negotiating g.726 then it sounds a bit distorted. Added an option to res_pjsip_endpoint that allows g.726 negotiated audio to be treated as g.726 AAL2 packed. ASTERISK-25158 #close Reported by: Steve Pitts Change-Id: Ie7e21f75493d7fe53e75e12c971e72f5afa33615	10 years ago
mjordan	de8c7f46ed	main/cdr: Carry over the disable flag when 'disable all' is specified ... The CDR_PROP function (as well as the NoCDR application) set the 'disable all' flag (AST_CDR_FLAG_DISABLE_ALL) on the current CDR. This flag is supposed to be applied to all CDRs that are currently in the chain, as well as all CDRs that may be created in the future. Currently, however, the flag is only applied to the existing CDRs in the chain; new CDRs do not receive the 'disable all' flag. In particular, this affects parallel dials, which generate new CDRs for each pair of channels in the dial attempt. This patch carries over the 'disable all' flag when it is specified on a CDR and a new CDR is generated for the chain. ASTERISK-24344 #close Change-Id: I91a0f0031e4d147bdf8a68ecd08304d506fb6a0e	10 years ago
Matt Jordan	78ea356e78	main/cdr: Copy context/exten on chained CDRs for parallel dials in subroutines ... When a parallel dial occurs, a new CDR will be created for each dial attempt that is made. In most circumstances, the act of creating each CDR in the chain will include a step that updates the Party A snapshot, which causes the context/extension of the Party A to be copied onto the CDR object. However, when the Party A is in a subroutine, we explicitly do *not* copy the context/extension onto the CDR. This prevents the Macro or GoSub routine name from blowing away the context/extension that the channel was originally executing in. For the original CDR, this is not a problem: the original CDR already recorded the last known 'good' state of the channel just prior to it going into the subroutine. However, for newly generated CDRs in a chain, there is no context/extension set on them. Since we are in a subroutine, we will never set the Party A's context/extension on the CDR, and we end up with a CDR with no destination recorded on it. This patch updates the creation of a chained CDR such that it copies over the original CDR's context/extension. This is the last known "good" state of the CDR, and is a reasonable starting point for the newly generated CDR. In the case where we are not in a subroutine, subsequent code will update the location of the CDR from the Party A information; in the case where we are in a subroutine, the context/extension on the original CDR is the correct information. ASTERISK-24443 #close Change-Id: I6a3ef0d6e458d3b9b30572feaec70f2964f3bc2a	10 years ago
Matt Jordan	0b8b952921	Merge "bridge: When performing a blonde transfer update connected line information." into 13	10 years ago
Mark Michelson	2618d1e638	Merge "chan_sip.c: Update dialog fromtag after request with auth" into 13	10 years ago
Mark Michelson	0b233ea61d	Merge "app_directory: Fix crash when using the alias option 'a'." into 13	10 years ago
Damian Ivereigh	3f57f3f8ec	chan_sip.c: Update dialog fromtag after request with auth ... If a client sends and INVITE which is 401 rejected, then subsequently sends a new INVITE with the auth info and uses a different fromtag from the first INVITE, Asterisk will accept the new INVITE as part of the original dialog - match_req_to_dialog() specifically ignores the fromtag. However it does not update the stored dialog with the new fromtag. This results in Asterisk being unable to match future packets that are part of this dialog (such as the ACK to the OK or the OK to the BYE), and the call is dropped. This problem was originally found when using an NEC-i SV8100-GE (NEC SIP Card). * After a successful match of a packet to the dialog, if the packet is not a SIP_RESPONSE, authentication is present and the fromtags are different, the stored fromtag is updated with the one from the recent INVITE. ASTERISK-25154 #close Reported by: Damian Ivereigh Tested by: Damian Ivereigh Change-Id: I5c16cf3b409e5ef9f2b2fe974b6bd2a45a6aa17e	10 years ago
Matt Jordan	30a0f2d9ac	chan_pjsip: Set the context and extension on the channel when created ... Prior to this patch, chan_pjsip was failing to pass the endpoint's context and the desired extension to the ast_channel_alloc_* routine. This caused a new channel snapshot to be issued without a context and extension, which can cause some reporting issues for users of AMI, CEL, and other APIs. The channel driver would later set the context and extension on the channel such that the channel would start in the correct location in the dialplan, but the information reported in the initial event would be incorrect. This patch modifies the channel driver such that it now passes the context and extension directly into the allocation routine. This provides the information in the new channel snapshot published over Stasis. ASTERISK-25156 #close Reported by: cloos Change-Id: Ic6f8542836e596db8f662071d118e8f934fdf25e	10 years ago
Joshua Colp	dbb067279e	bridge: When performing a blonde transfer update connected line information. ... When performing a blonde transfer the code uses the old masquerade mechanism to move a channel around. As a result of this certain information, such as connected line, is moved between the channels involved. Upon completion of the move a frame is queued which is supposed to update the connected line information on the channel. This does not occur as the code considers it a redundant update since the masquerade operation updated the channel (but did not inform it of the new connected line information). The code also does not queue a connected line update to be handled by the thread handling the channel. Without this any other channel that may be loosely involved does not know it is talking to a different caller. This change does the following to resolve this: 1. The indicated connected line information is cleared upon completion of the masquerade operation when doing a blonde transfer. This prevents the connected line update from being considered redundant. 2. A connected line update frame is now queued upon the completion of the masquerade operation so any other channel loosely involved knows that there is a different caller. ASTERISK-25157 #close Reported by: Joshua Colp Change-Id: Ibb8798184a1dab3ecd35299faecc420034adbf20	10 years ago
Richard Mudgett	a2f4d03c87	app_directory: Fix crash when using the alias option 'a'. ... The voicemail.conf mailbox key/value pair is defined as: <mailbox>=[<password>[,<full-name>[,<email>[,<pager>[,<options>]]]]] Where all fields in the value including the field values are optional. Since the parsing code for the mailbox key/value pair is sloppy, this patch tightens the parsing for the directory information. * Renamed the 'pos' and 'bufptr' variables to 'name' and 'options' respectively in search_directory_sub(). Those names make more sense. * Made sure that search_directory_sub() is dealing with the voicemail.conf mailbox options field if it even exists when looking for the 'hidefromdir' and 'alias' options. * Fix crash if a voicemail.conf mailbox is just <mailbox>=<password>,<name> when the 'a' option is used. If there were no fields after the name then the 'options' pointer was not checked for NULL. * Fix users.conf alias processing if the 'a' option is used. The wrong variable was used. ASTERISK-25087 #close Reported by: Chet Stevens Change-Id: I86052ea77307beddddba5279824d39dc0d593374	10 years ago
Mark Michelson	006930ee51	Merge "res_pjsip.h: Fix some doxygen comments." into 13	10 years ago
Richard Mudgett	a2b718f4f6	res_pjsip.h: Fix some doxygen comments. ... Change-Id: I4615771077c3c6a0a7273da6d7b5f77af7e8d976	10 years ago
Richard Mudgett	32ddf6d86b	taskprocessor.c: Remove extra unref from off-nominal path. ... Change-Id: Iee3bd8c8a528776056972066698fe735f0f6cf60	10 years ago
Yousf Ateya	cf98c744d5	chan_iax2: Prevent deadlock between hangup and sending lagrq/ping ... channels/chan_iax.c: Prevent the deadlock between iax2_hangup and send_lagrq/ send_ping. This deadlock happens because the scheduled task send_lagrq(or send_ping) starts execution after the call hangup procedure starts but before it deletes the tasks in the scheduler. The solution is to delete scheduled lagrq (and ping) task asynchronously (i.e. schedule AST_SCHED_DEL for these tasks); By this, AST_SCHED_DEL will be called in a new context (doesn't have callno locked). This commit also cleans up the procedure of sending LAGRQ and PING. main/sched.c: Do not assert when deleting non existant entry from scheduler. This assert seems to be the reason for a lot of awkward code to avoid it. ASTERISK-24983 #close Reported by: Y Ateya Change-Id: I03bec1fc8faacb89630269e935fa667c6d6c080c	10 years ago
Mark Michelson	d55d17027c	Merge "weakref attribute detection broken with gcc 4.6 and higher" into 13	10 years ago
Ivan Poddubny	8af6c9cf6b	res_pjsip_transport_websocket: Fix use-after-free bugs. ... This patch fixes use-after-free bugs caught by AddressSanitizer. 1. PJSIP transport manager may decide to destroy transport on its own. For example, when the contact registered via websocket has not renewed its registration in time. The transport was destoyed, but the websocket listener thread was still active until the socket closes, and then tried to call transport_shutdown on transport that has been freed. Also, the transport destructor accessed wstransport->rdata.tp_info.pool right after freeing memory that contained wstransport itself. This patch converts transport to an ao2 object, allowing it to be refcounted, so that it is available until both websocket listener and pjsip transport manager are finished with it. 2. The websocket listener deletes the last reference on websocket session when the tcp connection is closed, and it gets destroyed, but the transport manager may still use it, for example when disconnect happens in the middle of a SIP transaction. A new reference to websocket session has been added that is released with the transport to prevent this. ASTERISK-25096 #close Reported by: Josh Kitchens ASTERISK-24963 #close Reported by: Badalian Vyacheslav Change-Id: Idc0b63eb6e459c1ddfb2430127d34b3c4d8d373b	10 years ago
ibercom	3046bc17ed	weakref attribute detection broken with gcc 4.6 and higher ... GCC 4.7 Manual: http://gcc.gnu.org/onlinedocs/gcc-4.7.4/gcc/Function-Attributes.html weakref ("target") A weak reference is an alias that does not by itself require a definition to be given for the target symbol. ASTERISK-22559 #close Reported by: Ibercom Change-Id: I36a136cae947b65187a697533416f9ff9a0b8cdf	10 years ago
Matt Jordan	8ea1c0aa81	Merge "Fix unsafe uses of ast_context pointers." into 13	10 years ago
Matt Jordan	e29f28e7a5	Merge "AMI: Escape string values." into 13	10 years ago
Corey Farrell	55c8daf88b	Fix unsafe uses of ast_context pointers. ... Although ast_context_find, ast_context_find_or_create and ast_context_destroy perform locking of the contexts table, any context pointer can become invalid at any time that the contexts table is unlocked. This change adds locking around all complete operations involving these functions. Places where ast_context_find was followed by ast_context_destroy have been replaced with calls ast_context_destroy_by_name. ASTERISK-25094 #close Reported by: Corey Farrell Change-Id: I1866b6787730c9c4f3f836b6133ffe9c820734fa	10 years ago
Joshua Colp	720251f2b8	Merge "Fixes for OS X" into 13	10 years ago