The escalator works by creating a set of startup commands in cli.conf
that set up logger channels and issue the debug commands for the
subsystems specified. If asterisk is running when it is executed,
the same commands will be issued to the running instance. The original
cli.conf is saved before any changes are made and can be restored by
executing '$prog --reset'.
The log output will be stored in...
$astlogdir/message.$uniqueid
$astlogdir/debug.$uniqueid
$astlogdir/dtmf.$uniqueid
$astlogdir/fax.$uniqueid
$astlogdir/security.$uniqueid
$astlogdir/pjsip_history.$uniqueid
$astlogdir/sip_history.$uniqueid
Some minor tweaks were made to chan_sip, and res_pjsip_history
so their history output could be send to a log channel as packets
are captured.
A minor tweak was also made to manager so events are output to verbose
when "manager set debug on" is issued.
Change-Id: I799f8e5013b86dc5282961b27383d134bf09e543
Issue introduced in b59956a87. In the non-darwin case libastssl/pj
should be versioned. This causes the symbol file for this lib
to not be generated.
Change-Id: Ib07ae8c40252813c488e2c1ac6204fd42816dd4c
(cherry picked from commit 54b027916a)
LikewiseOpen creates user names with a backslash in them. A gentle
massage with sed(1) allows such strings to be inserted into build.h
properly quoted. I am also adding the same for host name and other
strings used in the script that are more or less user-controlled.
ASTERISK-26754
Change-Id: Iac5ef2b67a68ee58f35ddbf86bb818ba6eabecae
With 500+ queues and a reload every minute, a random queue disappears
upon reload. The cause is mususe of the 'dead' flag. Namely, all queues
were marked dead up front, and then "resurrected" by dropping this flag
for those found in the configuration. But a queue marked dead can be
removed also when control leaves the app entry point on a PBX thread.
With this change, the queue is marked only not found, and at the end of
reload only the queues that are still not found are actually marked as
dead, so the dead flag is never reset, and set only on positively dead
queues.
ASTERISK-26755
Change-Id: I3a4537aec9eb8d8aeeaa0193407e3523feb004bf
This change adds a missing unreference of the hostname when resolving and
also cleans up the iterator.
ASTERISK-26735
Change-Id: Ic012ebaf3d89e714eec340b7b0c5e63c66af857a
* channel.c:ast_sendtext(): Fix T.140 SendText memory leak.
* format_compatibility.c: T.140 RED and T.140 were swapped.
* res_rtp_asterisk.c:rtp_red_init(): Fix ast_format_t140_red ref leak.
* res_rtp_asterisk.c:rtp_red_init(): Fix data race after starting periodic
scheduled red_write().
* res_rtp_asterisk.c: Some other minor misc tweaks.
Change-Id: Ifa27a2e0f8a966b1cf628607c86fc4374b0b88cb
When configuring a match using a netmask the error variable was
not defaulting to 0. For some people this would cause the code
to think an error occurred when adding the match when in reality
it added perfectly fine.
ASTERISK-26693
Change-Id: I850c250813742bddde65c84e739093c9e01dfe56
* make_silence() created a malloced silence slin frame without adding a
slin format ref. When the frame is destroyed it will unref the slin
format that never had a ref added. Memory corruption is expected to
follow.
* Simplified and fixed counting the number of samples in a frame list for
make_silence().
* Eliminated an unnecessary RAII_VAR associated with the make_silence()
frame.
Change-Id: I47de3f9b92635b7f8b4d72309444d6c0aee6f747
* ast_frisolate() could leak frame format refs on allocation
failures.
* Similified code in ast_frisolate() and code used by
ast_frisolate().
Change-Id: I79566d4d36b3d7801bf0c8294fcd3e9a86a2ed6d
mod_format.h: Note ast_filestream.fr holds a format ref.
translate.h: Note ast_trans_pvt.f holds a format ref.
Change-Id: I86bda354d725207b41e08920355d7c31b2d7f749
The mechanism used for detecting the maximum log level compiled into the
linked pjproject did not work. The API call simply stores the requested
level into an integer and does no range checking. Asterisk was assuming
that there was range checking and limited the new value to the allowable
range. To get the actual maximum log level compiled into the linked
pjproject we need to get and save off the initial set log level from
pjproject. This is the maximum log level supported.
* Get and save off the initial log level setting before altering it to the
desired level on startup. This has to be done by a macro rather than
calling a core function to avoid incorrectly linking pjproject.
* Split the initial log level warning messages to warn if the linked
pjproject cannot support the requested startup level and if it is too low
to get the pjproject buildopts for "pjproject show buildopts".
* Adjust the CLI "pjproject set log level" to check the saved max log
level and to generate normal output messages instead of a warning message.
ASTERISK-26743 #close
Change-Id: I40aa76653e2a1dece66c3f8734594b4f0471cfb4
If endpoint ACLs were specified, they were not being freed
when endpoints were destroyed. On systems with realtime endpoints, this
could add up quickly since each DB lookup would allocate the ACL without
freeing it.
ASTERISK-26731 #close
Reported by Ustinov Artem
Change-Id: Ie1f8bf5b7a0de628c975beba01e69c56893331ad
The 'ari set debug' command has been enhanced to accept 'all' as an
application name. This allows dumping of all apps even if an app
hasn't registered yet. To accomplish this, a new global_debug global
variable was added to res/stasis/app.c and new APIs were added to
set and query the value.
'ari set debug' now displays requests and responses as well as events.
This required refactoring the existing debug code.
* The implementation for 'ari set debug' was moved from stasis/cli.{c,h}
to ari/cli.{c,h}, and stasis/cli.{c,h} were deleted.
* In order to print the body of incoming requests even if a request
failed, the consumption of the body was moved from the ari stubs
to ast_ari_callback in res_ari.c and the moustache templates were
then regenerated. The body is now passed to ast_ari_invoke and then
on to the handlers. This results in code savings since that template
was inserted multiple times into all the stubs.
An additional change was made to the ao2_str_container implementation
to add partial key searching and a sort function. The existing cli
code assumed it was already there when it wasn't so the tab completion
was never working.
Change-Id: Ief936f747ce47f1fb14035fbe61152cf766406bf
(cherry picked from commit 1d890874f3)
Fix order of parameters in calls to VM_API_INT_VERIFY and
VM_API_STRING_VERIFY
ASTERISK-26739 #close
Change-Id: I30dc6b36893aadad6012be3f16f93aa5720870d6
Note: status: builds. Not tested any further.
An earlier attempt to prevent pjsua from spitting out an extra 6795
lines of debug output every time the testsuite called it was also
turning off the ability for asterisk to output debug info when it
needed to. This patch reverts the earlier fix and instead adds
a pjproject patch that sets the startup log level to 1 for pjsua
pjsystest and the pjsua python binding. This is an asterisk-only
patch that does not affect pjproject functionality and will not be
submitted upstream.
Change-Id: I347a8b58b2626f2906ccfc1d339e907627a0c9e8
An option has been added, srv_lookups, which controls whether
SRV lookups are performed on the provided match hosts or not.
It was possible for this option to be applied after resolution
had already happened.
This change makes it so hosts are stored away, settings are read
and applied, and then resolution is done. This ensures that no
matter the ordering the srv_lookups option is in effect.
ASTERISK-26735
Change-Id: I750378cb277be0140f8c5539450270afbfc43388
George Joseph
zuul
Torrey Searle
kkm
Joshua Colp
Richard Mudgett
Mark Michelson
Tzafrir Cohen