asterisk

Commit Graph

Author	SHA1	Message	Date
Mark Michelson	6fbffe42e1	res_pjsip: Set threadpool max size default to 50. During a stress test of subscriptions, a huge blast of subscription-related traffic resulted in the threadpool expanding to a ridiculous number of threads. The balooning of threads resulted in an increase of memory, which led to a crash due to being out of memory. An easy fix for the particular test was to limit the size of the threadpool, thus reining in the amount of memory that would be used. It was decided that there really is no downside to having a non-infinite default value for the maximum size of the threadpool, so this change introduces 50 threads as the maximum threadpool size for the SIP threadpool. ASTERISK-25513 #close Reported by John Bigelow Change-Id: If0b9514f1d9b172540ce1a6e2f2ffa1f2b6119be	10 years ago
Kevin Harwell	5737650a67	res_pjsip: add CLI command to show global and system configuration Added a new CLI command for res_pjsip that shows both global and system configuration settings: pjsip show settings ASTERISK-24918 #close Reported by: Scott Griepentrog Review: https://reviewboard.asterisk.org/r/4597/ git-svn-id: https://origsvn.digium.com/svn/asterisk/branches/13@434527 65c4cc65-6c06-0410-ace0-fbb531ad65f3	11 years ago
Mark Michelson	27dc7e47d7	Make the disable_tcp_switch PJSIP system object enabled by default. Testing has shown repeatedly that PJSIP's default behavior of switching automatically to TCP for large messages can cause issues. The most common issues are that devices that we are communicating with do not handle the switch to TCP gracefully, thus causing situations such as broken calls or broken subscriptions. Now, in order to have this behavior happen, you must opt into it. The sample file has been updated to warn that enabling the TCP switch behavior may cause issues for you, so use at your own risk. git-svn-id: https://origsvn.digium.com/svn/asterisk/branches/13@427334 65c4cc65-6c06-0410-ace0-fbb531ad65f3	11 years ago
Richard Mudgett	b586e7f0b2	res_pjsip: Add disable_tcp_switch option. When a packet exceeds the MTU, pjproject will switch from UDP to TCP. In some circumstances (on some networks), this can cause some issues with messages not getting sent to the correct destination - and can also cause connections to get dropped due to quirks in pjproject deciding to terminate TCP connections with no messages. While fixing the routing/messaging issues is important, having a configuration option in Asterisk that tells pjproject to not switch over to TCP would be useful. That way, if some glitch is discovered on some other network/site, we can at least disable the behavior until a fix is put into place. AFS-197 #close Review: https://reviewboard.asterisk.org/r/4137/ ........ Merged revisions 427129 from http://svn.asterisk.org/svn/asterisk/branches/12 git-svn-id: https://origsvn.digium.com/svn/asterisk/branches/13@427130 65c4cc65-6c06-0410-ace0-fbb531ad65f3	11 years ago
Mark Michelson	eefcb79bfb	Prevent duplicate sorcery wizards from being applied to sorcery object types. This commit contains several changes to sorcery: 1) Application of sorcery configuration based on module name is automatically performed when sorcery is opened for a module. 2) Sorcery will not attempt to apply the same wizard to an object type more than once. 3) Sorcery gives more exact results when attempting to apply a wizard, whether as the default or based on configuration. Sorcery unit tests still pass for me after making these changes. Review: https://reviewboard.asterisk.org/r/3326 ........ Merged revisions 411159 from http://svn.asterisk.org/svn/asterisk/branches/12 git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@411656 65c4cc65-6c06-0410-ace0-fbb531ad65f3	12 years ago
Joshua Colp	216b04e6f4	res_pjsip: Fix memory leak of nameservers in off-nominal resolver creation failure. Thanks Walter Doekes! ........ Merged revisions 410844 from http://svn.asterisk.org/svn/asterisk/branches/12 git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@410845 65c4cc65-6c06-0410-ace0-fbb531ad65f3	12 years ago
Joshua Colp	cc40bf5317	res_pjsip: Enable PJSIP DNS client support. This change enables DNS client support within PJSIP. System nameservers are automatically discovered using res_init or res_ninit. If this fails then PJSIP will resort to using gethostbyname for resolution. By enabling this support we gain SRV support, failover, and weight support. (closes issue ASTERISK-23435) Reported by: Matt Jordan Review: https://reviewboard.asterisk.org/r/3343/ ........ Merged revisions 410795 from http://svn.asterisk.org/svn/asterisk/branches/12 git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@410796 65c4cc65-6c06-0410-ace0-fbb531ad65f3	12 years ago
Mark Michelson	eba91d2a98	Revert changes to sorcery that accidentally got committed. These changes were still up for review and have not been approved yet. I must have had the changes in my working copy when making a different change. ........ Merged revisions 410696 from http://svn.asterisk.org/svn/asterisk/branches/12 git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@410699 65c4cc65-6c06-0410-ace0-fbb531ad65f3	12 years ago
Mark Michelson	d44aefeef4	Fix stuck channel in ARI through the introduction of synchronous bridge actions. Playing back a file to a channel in an ARI bridge would attempt to wait until the playback concluded before returning. The method used involved signaling the waiting thread in the ARI custom playback function. The problem with this is that there were some corner cases that were not accounted for: * If a bridge channel could not be found, then we never would attempt the playback but would still attempt to wait for the playback to complete. * If the bridge playfile action failed to queue, we would still attempt to wait for the playback to complete. * If the bridge playfile action were queued but some circumstance caused the playback not to occur (the bridge dies, the channel is removed from the bridge), then we would never be notified. The solution to this is to move the waiting logic into the bridge code. A new bridge API function is added to queue a synchronous action on a bridge. The waiting thread is notified when the queued frame has been freed, either due to an error occurring or due to successful playback. As a failsafe, the waiting thread has a 10 minute timeout just in case there is a frame leak somewhere. Review: https://reviewboard.asterisk.org/r/3338 ........ Merged revisions 410673 from http://svn.asterisk.org/svn/asterisk/branches/12 git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@410684 65c4cc65-6c06-0410-ace0-fbb531ad65f3	12 years ago
George Joseph	a94c8562fd	sorcery: Create sorcery instance registry. In order to retrieve an arbitrary sorcery instance from a dialplan function (or any place else) there needs to be a registry of sorcery instances. ast_sorcery_init now creates a hashtab as a registry. ast_sorcery_open now checks the hashtab for an existing sorcery instance matching the caller's module name. If it finds one, it bumps the refcount and returns it. If not, it creates a new sorcery instance, adds it to the hashtab, then returns it. ast_sorcery_retrieve_by_module_name is a new function that does a hashtab lookup by module name. It can be called by the future dialplan function. res_pjsip/config_system needed a small change to share the main res_pjsip sorcery instance. tests/test_sorcery was updated to include a test for the registry. (closes issue ASTERISK-22537) Review: http://reviewboard.asterisk.org/r/3184/ ........ Merged revisions 408518 from http://svn.asterisk.org/svn/asterisk/branches/12 git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@408519 65c4cc65-6c06-0410-ace0-fbb531ad65f3	12 years ago
Kevin Harwell	1c45a32ee8	res_pjsip: convert configuration settings names to snake case Renamed, where appropriate, the configuration options for chan/res_pjsip to use snake case (compound words separated by an underscore). For example, faxdetect will become fax_detect, recordofffeature will become record_off_feature, etc... Review: https://reviewboard.asterisk.org/r/3002/ ........ Merged revisions 403022 from http://svn.asterisk.org/svn/asterisk/branches/12 git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@403051 65c4cc65-6c06-0410-ace0-fbb531ad65f3	12 years ago
David M. Lee	4c128198c8	res_pjsip: Print a helpful error message if sorcery registration fails ........ Merged revisions 402570 from http://svn.asterisk.org/svn/asterisk/branches/12 git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@402572 65c4cc65-6c06-0410-ace0-fbb531ad65f3	12 years ago
Kinsey Moore	dfa5be76d4	Expose res_pjsip threadpool options Expose initial size, automatic increment, maximum size, and idle timeout as configurable parameters for the res_pjsip thread pool. Review: https://reviewboard.asterisk.org/r/2704/ (closes issue ASTERISK-22143) git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@396321 65c4cc65-6c06-0410-ace0-fbb531ad65f3	12 years ago
Mark Michelson	735b30ad71	The large GULP->PJSIP renaming effort. The general gist is to have a clear boundary between old SIP stuff and new SIP stuff by having the word "SIP" for old stuff and "PJSIP" for new stuff. Here's a brief rundown of the changes: * The word "Gulp" in dialstrings, functions, and CLI commands is now "PJSIP" * chan_gulp.c is now chan_pjsip.c * Function names in chan_gulp.c that were "gulp_" are now "chan_pjsip_" * All files that were "res_sip" are now "res_pjsip" * The "res_sip" directory is now "res_pjsip" * Files in the "res_pjsip" directory that began with "sip_" are now "pjsip_" * The configuration file is now "pjsip.conf" instead of "res_sip.conf" * The module info for all PJSIP-related files now uses "PJSIP" instead of "SIP" * CLI and AMI commands created by Asterisk's PJSIP modules now have "pjsip" as the starting word instead of "sip" git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@395764 65c4cc65-6c06-0410-ace0-fbb531ad65f3	12 years ago

14 Commits (d7f5421ea42ce18490e36f61e34893b96dc5708e)