33938 Commits (d6ffbff3331e9afe8a8510fce4ca06ab28217eef)

 

All Branches   

Search

Author	SHA1	Message	Date
George Joseph	d6ffbff333	core_unreal.c: Fix memory leak in ast_unreal_new_channels() ... When the channel tech is multistream capable, the reference to chan_topology was passed to the new channel. When the channel tech isn't multistream capable, the reference to chan_topology was never released. "Local" channels are multistream capable so it didn't affect them but the confbridge "CBAnn" and the bridge_media "Recorder" channels are not so they caused a leak every time one of them was created. Also added tracing to ast_stream_topology_alloc() and stream_topology_destroy() to assist with debugging. Resolves: #938	7 months ago
Allan Nathanson	99221c81ed	dnsmgr.c: dnsmgr_refresh() incorrectly flags change with DNS round-robin ... The dnsmgr_refresh() function checks to see if the IP address associated with a name/service has changed. The gotcha is that the ast_get_ip_or_srv() function only returns the first IP address returned by the DNS query. If there are multiple IPs associated with the name and the returned order is not consistent (e.g. with DNS round-robin) then the other IP addresses are not included in the comparison and the entry is flagged as changed even though the IP is still valid. Updated the code to check all IP addresses and flag a change only if the original IP is no longer valid. Resolves: #924	7 months ago
George Joseph	f9d5d659c6	geolocation.sample.conf: Fix comment marker at end of file ... Resolves: #937	7 months ago
Sean Bright	fae5d21b6a	func_base64.c: Ensure we set aside enough room for base64 encoded data. ... Reported by SingularTricycle on IRC. Fixes #940	7 months ago
Naveen Albert	62b6ea3202	app_dial: Fix progress timeout. ... Under some circumstances, the progress timeout feature added in commit 320c98eec8 does not work as expected, such as if there is no media flowing. Adjust the waitfor call to explicitly use the progress timeout if it would be reached sooner than the answer timeout to ensure we handle the timers properly. Resolves: #821	7 months ago
Naveen Albert	fa614f755d	chan_dahdi: Never send MWI while off-hook. ... In some circumstances, it is possible for the do_monitor thread to erroneously think that a line is on-hook and send an MWI FSK spill to it when the line is really off-hook and no MWI should be sent. Commit 0a8b3d3467 previously fixed this issue in a more readily encountered scenario, but it has still been possible for MWI to be sent when it shouldn't be. To robustly fix this issue, query DAHDI for the hook status to ensure we don't send MWI on a line that is actually still off hook. Resolves: #928	7 months ago
George Joseph	29e0d77765	manager.c: Add unit test for Originate app and appdata permissions ... This unit test checks that dialplan apps and app data specified as parameters for the Originate action are allowed with the permissions the user has.	7 months ago
Sean Bright	776bb8c56b	alembic: Drop redundant voicemail_messages index. ... The `voicemail_messages_dir` index is a left prefix of the table's primary key and therefore unnecessary.	8 months ago
Sean Bright	c80ce750bb	res_agi.c: Ensure SIGCHLD handler functions are properly balanced. ... Calls to `ast_replace_sigchld()` and `ast_unreplace_sigchld()` must be balanced to ensure that we can capture the exit status of child processes when we need to. This extends to functions that call `ast_replace_sigchld()` and `ast_unreplace_sigchld()` such as `ast_safe_fork()` and `ast_safe_fork_cleanup()`. The primary change here is ensuring that we do not call `ast_safe_fork_cleanup()` in `res_agi.c` if we have not previously called `ast_safe_fork()`. Additionally we reinforce some of the documentation and add an assertion to, ideally, catch this sooner were this to happen again. Fixes #922	8 months ago
Naveen Albert	f415e313b4	main, res, tests: Fix compilation errors on FreeBSD. ... asterisk.c, manager.c: Increase buffer sizes to avoid truncation warnings. config.c: Include header file for WIFEXITED/WEXITSTATUS macros. res_timing_kqueue: Use more portable format specifier. test_crypto: Use non-linux limits.h header file. Resolves: #916	8 months ago
George Joseph	ec2e26cfe7	res_rtp_asterisk: Fix dtls timer issues causing FRACKs and SEGVs ... In dtls_srtp_handle_timeout(), when DTLSv1_get_timeout() returned success but with a timeout of 0, we were stopping the timer and decrementing the refcount on instance but not resetting the timeout_timer to -1. When dtls_srtp_stop_timeout_timer() was later called, it was atempting to stop a stale timer and could decrement the refcount on instance again which would then cause the instance destructor to run early. This would result in either a FRACK or a SEGV when ast_rtp_stop(0 was called. According to the OpenSSL docs, we shouldn't have been stopping the timer when DTLSv1_get_timeout() returned success and the new timeout was 0 anyway. We should have been calling DTLSv1_handle_timeout() again immediately so we now reschedule the timer callback for 1ms (almost immediately). Additionally, instead of scheduling the timer callback at a fixed interval returned by the initial call to DTLSv1_get_timeout() (usually 999 ms), we now reschedule the next callback based on the last call to DTLSv1_get_timeout(). Resolves: #487	8 months ago
Ben Ford	5a237235c0	manager.c: Restrict ModuleLoad to the configured modules directory. ... When using the ModuleLoad AMI action, it was possible to traverse upwards through the directories to files outside of the configured modules directory. We decided it would be best to restrict access to modules exclusively in the configured directory. You will now get an error when the specified module is outside of this limitation. Fixes: #897 UserNote: The ModuleLoad AMI action now restricts modules to the configured modules directory.	8 months ago
jiangxc	e1da2fec42	res_agi.c: Prevent possible double free during `SPEECH RECOGNIZE` ... When using the speech recognition module, crashes can occur sporadically due to a "double free or corruption (out)" error. Now, in the section where the audio stream is being captured in a loop, each time after releasing fr, it is set to NULL to prevent repeated deallocation. Fixes #772	8 months ago
Sean Bright	9da3bdefef	cdr_custom: Allow absolute filenames. ... A follow up to #893 that brings the same functionality to cdr_custom. Also update the sample configuration files to note support for absolute paths.	8 months ago
Naveen Albert	b29776a5b0	astfd.c: Avoid calling fclose with NULL argument. ... Don't pass through a NULL argument to fclose, which is undefined behavior, and instead return -1 and set errno appropriately. This also avoids a compiler warning with glibc 2.38 and newer, as glibc commit 71d9e0fe766a3c22a730995b9d024960970670af added the nonnull attribute to this argument. Resolves: #900	8 months ago
Peter Jannesen	e522eb6357	channel: Preserve CHANNEL(userfield) on masquerade. ... In certain circumstances a channel may undergo an operation referred to as a masquerade. If this occurs the CHANNEL(userfield) value was not preserved causing it to get lost. This change makes it so that this field is now preserved. Fixes: #882	8 months ago
Peter Jannesen	9e76533f90	cel_custom: Allow absolute filenames. ... If a filename starts with a '/' in cel_custom [mappings] assume it is a absolute file path and not relative filename/path to AST_LOG_DIR/cel_custom/	8 months ago
Naveen Albert	44a6349b69	app_voicemail: Fix ill-formatted pager emails with custom subject. ... Add missing end-of-headers newline to pager emails with custom subjects, since this was missing from this code path. Resolves: #902	8 months ago
Sean Bright	a6db5455ac	res_pjsip_pubsub: Persist subscription 'generator_data' in sorcery ... Fixes #895	8 months ago
George Joseph	e0ca3a634c	stir_shaken: Fix propagation of attest_level and a few other values ... attest_level, send_mky and check_tn_cert_public_url weren't propagating correctly from the attestation object to the profile and tn. * In the case of attest_level, the enum needed to be changed so the "0" value (the default) was "NOT_SET" instead of "A". This now allows the merging of the attestation object, profile and tn to detect when a value isn't set and use the higher level value. * For send_mky and check_tn_cert_public_url, the tn default was forced to "NO" which always overrode the profile and attestation objects. Their defaults are now "NOT_SET" so the propagation happens correctly. * Just to remove some redundant code in tn_config.c, a bunch of calls to generate_sorcery_enum_from_str() and generate_sorcery_enum_to_str() were replaced with a single call to generate_acfg_common_sorcery_handlers(). Resolves: #904	8 months ago
George Joseph	29d6a62768	Fix application references to Background ... The app is actually named "BackGround" but several references in XML documentation were spelled "Background" with the lower case "g". This was causing documentation links to return "not found" messages.	8 months ago
George Joseph	1805801588	manager.conf.sample: Fix mathcing typo	8 months ago
George Joseph	a9f16f23ae	manager: Enhance event filtering for performance ... UserNote: You can now perform more granular filtering on events in manager.conf using expressions like `eventfilter(name(Newchannel),header(Channel),method(starts_with)) = PJSIP/` This is much more efficient than `eventfilter = Event: Newchannel.*Channel: PJSIP/` Full syntax guide is in configs/samples/manager.conf.sample.	8 months ago
George Joseph	539009cbed	manager.c: Split XML documentation to manager_doc.xml	8 months ago
George Joseph	5c25f268c8	.github: Fix realtime param on Weekly and Nightly tests and... ... Rename the "Cleanup" job in the cherry-pick and recheck jobs to "Summary".	8 months ago
George Joseph	43c4d2537a	.github: Add WeeklyTests and make Nightlies Monday-Saturday ... ...and add "realtime" option.	8 months ago
George Joseph	01aa84e42f	db.c: Remove limit on family/key length ... Consumers like media_cache have been running into issues with the previous astdb "/family/key" limit of 253 bytes when needing to store things like long URIs. An Amazon S3 URI is a good example of this. Now, instead of using a static 256 byte buffer for "/family/key", we use ast_asprintf() to dynamically create it. Both test_db.c and test_media_cache.c were also updated to use keys/URIs over the old 253 character limit. Resolves: #881 UserNote: The `ast_db_*()` APIs have had the 253 byte limit on "/family/key" removed and will now accept families and keys with a total length of up to SQLITE_MAX_LENGTH (currently 1e9!). This affects the `DB*` dialplan applications, dialplan functions, manager actions and `databse` CLI commands. Since the media_cache also uses the `ast_db_*()` APIs, you can now store resources with URIs longer than 253 bytes.	8 months ago
George Joseph	c535a1d2cd	.github: Changes required to use cached builds and shorten names	8 months ago
George Joseph	936d2006f2	res_stir_shaken: Remove stale include for jansson.h in verification.c ... verification.c had an include for jansson.h left over from previous versions of the module. Since res_stir_shaken no longer has a dependency on jansson, the bundled version wasn't added to GCC's include path so if you didn't also have a jansson development package installed, the compile would fail. Removing the stale include was the only thing needed. Resolves: #889	8 months ago
George Joseph	f0994e1e62	res_stir_shaken.c: Fix crash when stir_shaken.conf is invalid ... * If the call to ast_config_load() returns CONFIG_STATUS_FILEINVALID, check_for_old_config() now returns LOAD_DECLINE instead of continuing on with a bad pointer. * If CONFIG_STATUS_FILEMISSING is returned, check_for_old_config() assumes the config is being loaded from realtime and now returns LOAD_SUCCESS. If it's actually not being loaded from realtime, sorcery will catch that later on. * Also refactored the error handling in load_module() a bit. Resolves: #884	8 months ago
George Joseph	d010dd9752	res_stir_shaken: Check for disabled before param validation ... For both attestation and verification, we now check whether they've been disabled either globally or by the profile before validating things like callerid, orig_tn, dest_tn, etc. This prevents useless error messages. Resolves: #879	8 months ago
Tinet-mucw	03983b2ff9	app_chanspy.c: resolving the issue writing frame to whisper audiohook. ... ChanSpy(${channel}, qEoSw): because flags set o, ast_audiohook_set_frame_feed_direction(audiohook, AST_AUDIOHOOK_DIRECTION_READ); this will effect whisper audiohook and spy audiohook, this makes writing frame to whisper audiohook impossible. So add function start_whispering to starting whisper audiohook. Resolves: #876	8 months ago
Alexei Gradinari	9b3d3a7f0e	autoservice: Do not sleep if autoservice_stop is called within autoservice thread ... It's possible that ast_autoservice_stop is called within the autoservice thread. In this case the autoservice thread is stuck in an endless sleep. To avoid endless sleep ast_autoservice_stop must check that it's not called within the autoservice thread. Fixes: #763	8 months ago
George Joseph	dba0af7349	res_resolver_unbound: Test for NULL ub_result in unbound_resolver_callback ... The ub_result pointer passed to unbound_resolver_callback by libunbound can be NULL if the query was for something malformed like `.1` or `[.1]`. If it is, we now set a 'ns_r_formerr' result and return instead of crashing with a SEGV. This causes pjproject to simply cancel the transaction with a "No answer record in the DNS response" error. The existing "off nominal" unit test was also updated to check this condition. Although not necessary for this fix, we also made ast_dns_resolver_completed() tolerant of a NULL result. Resolves: GHSA-v428-g3cw-7hv9	8 months ago
Jean-Denis Girard	83b3783499	app_voicemail: Fix sql insert mismatch caused by cherry-pick ... When commit e8c9cb80 was cherry-picked in from master, the fact that the 20 and 18 branches still had the old "macrocontext" column wasn't taken into account so the number of named parameters didn't match the number of '?' placeholders. They do now. We also now use ast_asprintf to create the full mailbox query SQL statement instead of trying to calculate the proper length ourselves. Resolves: #831	9 months ago
Mike Bradeen	cf5a6435c2	res_pjsip_sdp_rtp: Use negotiated DTMF Payload types on bitrate mismatch ... When Asterisk sends an offer to Bob that includes 48K and 8K codecs with matching 4733 offers, Bob may want to use the 48K audio codec but can not accept 48K digits and so negotiates for a mixed set. Asterisk will now check Bob's offer to make sure Bob has indicated this is acceptible and if not, will use Bob's preference. Fixes: #847	9 months ago
Tinet-mucw	4263f7b58d	app_chanspy.c: resolving the issue with audiohook direction read ... ChanSpy(${channel}, qEoS): When chanspy spy the direction read, reading frame is often failed when reading direction read audiohook. because chanspy only read audiohook direction read; write_factory_ms will greater than 100ms soon, then ast_slinfactory_flush will being called, then direction read will fail. Resolves: #861	9 months ago
George Joseph	53c76478f2	security_agreements.c: Refactor the to_str functions and fix a few other bugs ... * A static array of security mechanism type names was created. * ast_sip_str_to_security_mechanism_type() was refactored to do a lookup in the new array instead of using fixed "if/else if" statments. * security_mechanism_to_str() and ast_sip_security_mechanisms_to_str() were refactored to use ast_str instead of a fixed length buffer to store the result. * ast_sip_security_mechanism_type_to_str was removed in favor of just referencing the new type name array. Despite starting with "ast_sip_", it was a static function so removing it doesn't affect ABI. * Speaking of "ast_sip_", several other static functions that started with "ast_sip_" were renamed to avoid confusion about their public availability. * A few VECTOR free loops were replaced with AST_VECTOR_RESET(). * Fixed a meomry leak in pjsip_configuration.c endpoint_destructor caused by not calling ast_sip_security_mechanisms_vector_destroy(). * Fixed a memory leak in res_pjsip_outbound_registration.c add_security_headers() caused by not specifying OBJ_NODATA in an ao2_callback. * Fixed a few ao2_callback return code misuses. Resolves: #845	9 months ago
Alexei Gradinari	8b39a956e7	res_pjsip_sdp_rtp fix leaking astobj2 ast_format ... PR #700 added a preferred_format for the struct ast_rtp_codecs, but when set the preferred_format it leaks an astobj2 ast_format. In the next code ast_rtp_codecs_set_preferred_format(&codecs, ast_format_cap_get_format(joint, 0)); both functions ast_rtp_codecs_set_preferred_format and ast_format_cap_get_format increases the ao2 reference count. Fixes: #856	9 months ago
George Joseph	0284099a98	stir_shaken.conf.sample: Fix bad references to private_key_path ... They should be private_key_file. Resolves: #854	9 months ago
Sean Bright	fe4394ebfe	res_pjsip_logger.c: Fix 'OPTIONS' tab completion. ... Fixes #843	9 months ago
Sean Bright	fad7a7525b	alembic: Make 'revises' header comment match reality.	9 months ago
Cade Parker	5840e55bb5	chan_mobile: decrease CHANNEL_FRAME_SIZE to prevent delay ... On modern Bluetooth devices or lower-powered asterisk servers, decreasing the channel frame size significantly improves latency and delay on outbound calls with only a mild sacrifice to the quality of the call (the frame size before was massive overkill to begin with)	9 months ago
Mike Bradeen	e94c5f0d3b	res_pjsip_notify: add dialplan application ... Add dialplan application PJSIPNOTIFY to send either pre-configured NOTIFY messages from pjsip_notify.conf or with headers defined in dialplan. Also adds the ability to send pre-configured NOTIFY commands to a channel via the CLI. Resolves: #799 UserNote: A new dialplan application PJSIPNotify is now available which can send SIP NOTIFY requests from the dialplan. The pjsip send notify CLI command has also been enhanced to allow sending NOTIFY messages to a specific channel. Syntax: pjsip send notify <option> channel <channel>	9 months ago
George Joseph	2da5559482	manager.c: Fix FRACK when doing CoreShowChannelMap in DEVMODE ... If you run an AMI CoreShowChannelMap on a channel that isn't in a bridge and you're in DEVMODE, you can get a FRACK because the bridge id is empty. We now simply return an empty list for that request.	9 months ago
Ben Ford	027127246e	channel: Add multi-tenant identifier. ... This patch introduces a new identifier for channels: tenantid. It's a stringfield on the channel that can be used for general purposes. It will be inherited by other channels the same way that linkedid is. You can set tenantid in a few ways. The first is to set it in the dialplan with the Set and CHANNEL functions: exten => example,1,Set(CHANNEL(tenantid)=My tenant ID) It can also be accessed via CHANNEL: exten => example,2,NoOp(CHANNEL(tenantid)) Another method is to use the new tenantid option for pjsip endpoints in pjsip.conf: [my_endpoint] type=endpoint tenantid=My tenant ID This is considered the best approach since you will be able to see the tenant ID as early as the Newchannel event. It can also be set using set_var in pjsip.conf on the endpoint like setting other channel variable: set_var=CHANNEL(tenantid)=My tenant ID Note that set_var will not show tenant ID on the Newchannel event, however. Tenant ID has also been added to CDR. It's read-only and can be accessed via CDR(tenantid). You can also get the tenant ID of the last channel communicated with via CDR(peertenantid). Tenant ID will also show up in CEL records if it has been set, and the version number has been bumped accordingly. Fixes: #740 UserNote: tenantid has been added to channels. It can be read in dialplan via CHANNEL(tenantid), and it can be set using Set(CHANNEL(tenantid)=My tenant ID). In pjsip.conf, it is recommended to use the new tenantid option for pjsip endpoints (e.g., tenantid=My tenant ID) so that it will show up in Newchannel events. You can set it like any other channel variable using set_var in pjsip.conf as well, but note that this will NOT show up in Newchannel events. Tenant ID is also available in CDR and can be accessed with CDR(tenantid). The peer tenant ID can also be accessed with CDR(peertenantid). CEL includes tenant ID as well if it has been set. UpgradeNote: A new versioned struct (ast_channel_initializers) has been added that gets passed to __ast_channel_alloc_ap. The new function ast_channel_alloc_with_initializers should be used when creating channels that require the use of this struct. Currently the only value in the struct is for tenantid, but now more fields can be added to the struct as necessary rather than the __ast_channel_alloc_ap function. A new option (tenantid) has been added to endpoints in pjsip.conf as well. CEL has had its version bumped to include tenant ID.	9 months ago
Jaco Kroon	7fb7e2b9fd	configure: Use . file rather than source file. ... source is a bash concept, so when /bin/sh points to another shell the existing construct won't work. Reference: https://bugs.gentoo.org/927055 Signed-off-by: Jaco Kroon <jaco@uls.co.za>	9 months ago
George Joseph	2d06722944	manager.c: Add entries to Originate blacklist ... Added Reload and DBdeltree to the list of dialplan application that can't be executed via the Originate manager action without also having write SYSTEM permissions. Added CURL, DB*, FILE, ODBC and REALTIME* to the list of dialplan functions that can't be executed via the Originate manager action without also having write SYSTEM permissions. If the Queue application is attempted to be run by the Originate manager action and an AGI parameter is specified in the app data, it'll be rejected unless the manager user has either the AGI or SYSTEM permissions. Resolves: #GHSA-c4cg-9275-6w44	9 months ago
Mike Bradeen	25c38db9a4	res_stasis: fix intermittent delays on adding channel to bridge ... Previously, on command execution, the control thread was awoken by sending a SIGURG. It was found that this still resulted in some instances where the thread was not immediately awoken. This change instead sends a null frame to awaken the control thread, which awakens the thread more consistently. Resolves: #801	9 months ago
Tinet-mucw	4aae8194b4	res_pjsip_sdp_rtp.c: Fix DTMF Handling in Re-INVITE with dtmf_mode set to auto ... When the endpoint dtmf_mode is set to auto, a SIP request is sent to the UAC, and the SIP SDP from the UAC does not include the telephone-event. Later, the UAC sends an INVITE, and the SIP SDP includes the telephone-event. In this case, DTMF should be sent by RFC2833 rather than using inband signaling. Resolves: asterisk#826	9 months ago