In some cases messages need to be sent to a direct URI (sip:<ip address>). This
patch adds in that support by using a default outbound endpoint. When sending
messages, if no endpoint can be found then the default one is used.
To facilitate this a new default_outbound_endpoint option was added to the
globals section for pjsip.conf.
Review: https://reviewboard.asterisk.org/r/2944/
........
Merged revisions 403680 from http://svn.asterisk.org/svn/asterisk/branches/12
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@403687 65c4cc65-6c06-0410-ace0-fbb531ad65f3
ConfBridge allows custom DTMF menus to be created in the confbridge.conf
file by assigning a DTMF key sequence to a sequence of actions as follows:
DTMF-sequence = action,action...
Unfortunately, the normal config file processing code interprets an
initial '#' character as starting a directive such as #include.
* Add the ability to escape the first non-blank character in a config line
so the '#' character can be used without triggering the directive
processing code.
(closes issue AFS-2)
(closes issue ASTERISK-22478)
Reported by: Nicolas Tanski
Patches:
jira_asterisk_22478_v11.patch (license #5621) patch uploaded by rmudgett (modified)
Review: https://reviewboard.asterisk.org/r/2969/
........
Merged revisions 402407 from http://svn.asterisk.org/svn/asterisk/branches/11
........
Merged revisions 402416 from http://svn.asterisk.org/svn/asterisk/branches/12
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@402417 65c4cc65-6c06-0410-ace0-fbb531ad65f3
When reworking chan_iax2 for IPv6, the ability to bind to multiple addresses
was removed by mistake. This patch restores this functionality and adds notes
about IPv6 addresses in the sample config.
(closes issue ASTERISK-22741)
Reported by: Joshua Colp
Tested by: Michael L. Young
Patches:
asterisk-22741-fix-binding-multiple-addr.diff
uploaded by Michael L. Young (license 5026)
Review: https://reviewboard.asterisk.org/r/2945/
........
Merged revisions 401488 from http://svn.asterisk.org/svn/asterisk/branches/12
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@401489 65c4cc65-6c06-0410-ace0-fbb531ad65f3
ConfBridge now has the ability to set the language of announcements to the
conference. The language can be set on a bridge profile in
confbridge.conf or by the dialplan function
CONFBRIDGE(bridge,language)=en.
(closes issue ASTERISK-19983)
Reported by: Jonathan White
Patches:
M19983_rev2.diff (license #5138) patch uploaded by junky (modified)
Tested by: rmudgett
........
Merged revisions 400741 from http://svn.asterisk.org/svn/asterisk/branches/11
........
Merged revisions 400742 from http://svn.asterisk.org/svn/asterisk/branches/12
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@400744 65c4cc65-6c06-0410-ace0-fbb531ad65f3
........
r399887 | dlee | 2013-09-26 10:41:47 -0500 (Thu, 26 Sep 2013) | 1 line
Minor performance bump by not allocate manager variable struct if we don't need it
........
r400138 | dlee | 2013-09-30 10:24:00 -0500 (Mon, 30 Sep 2013) | 23 lines
Stasis performance improvements
This patch addresses several performance problems that were found in
the initial performance testing of Asterisk 12.
The Stasis dispatch object was allocated as an AO2 object, even though
it has a very confined lifecycle. This was replaced with a straight
ast_malloc().
The Stasis message router was spending an inordinate amount of time
searching hash tables. In this case, most of our routers had 6 or
fewer routes in them to begin with. This was replaced with an array
that's searched linearly for the route.
We more heavily rely on AO2 objects in Asterisk 12, and the memset()
in ao2_ref() actually became noticeable on the profile. This was
#ifdef'ed to only run when AO2_DEBUG was enabled.
After being misled by an erroneous comment in taskprocessor.c during
profiling, the wrong comment was removed.
Review: https://reviewboard.asterisk.org/r/2873/
........
r400178 | dlee | 2013-09-30 13:26:27 -0500 (Mon, 30 Sep 2013) | 24 lines
Taskprocessor optimization; switch Stasis to use taskprocessors
This patch optimizes taskprocessor to use a semaphore for signaling,
which the OS can do a better job at managing contention and waiting
that we can with a mutex and condition.
The taskprocessor execution was also slightly optimized to reduce the
number of locks taken.
The only observable difference in the taskprocessor implementation is
that when the final reference to the taskprocessor goes away, it will
execute all tasks to completion instead of discarding the unexecuted
tasks.
For systems where unnamed semaphores are not supported, a really
simple semaphore implementation is provided. (Which gives identical
performance as the original taskprocessor implementation).
The way we ended up implementing Stasis caused the threadpool to be a
burden instead of a boost to performance. This was switched to just
use taskprocessors directly for subscriptions.
Review: https://reviewboard.asterisk.org/r/2881/
........
r400180 | dlee | 2013-09-30 13:39:34 -0500 (Mon, 30 Sep 2013) | 28 lines
Optimize how Stasis forwards are dispatched
This patch optimizes how forwards are dispatched in Stasis.
Originally, forwards were dispatched as subscriptions that are invoked
on the publishing thread. This did not account for the vast number of
forwards we would end up having in the system, and the amount of work it
would take to walk though the forward subscriptions.
This patch modifies Stasis so that rather than walking the tree of
forwards on every dispatch, when forwards and subscriptions are changed,
the subscriber list for every topic in the tree is changed.
This has a couple of benefits. First, this reduces the workload of
dispatching messages. It also reduces contention when dispatching to
different topics that happen to forward to the same aggregation topic
(as happens with all of the channel, bridge and endpoint topics).
Since forwards are no longer subscriptions, the bulk of this patch is
simply changing stasis_subscription objects to stasis_forward objects
(which, admittedly, I should have done in the first place.)
Since this required me to yet again put in a growing array, I finally
abstracted that out into a set of ast_vector macros in
asterisk/vector.h.
Review: https://reviewboard.asterisk.org/r/2883/
........
r400181 | dlee | 2013-09-30 13:48:57 -0500 (Mon, 30 Sep 2013) | 28 lines
Remove dispatch object allocation from Stasis publishing
While looking for areas for performance improvement, I realized that an
unused feature in Stasis was negatively impacting performance.
When a message is sent to a subscriber, a dispatch object is allocated
for the dispatch, containing the topic the message was published to, the
subscriber the message is being sent to, and the message itself.
The topic is actually unused by any subscriber in Asterisk today. And
the subscriber is associated with the taskprocessor the message is being
dispatched to.
First, this patch removes the unused topic parameter from Stasis
subscription callbacks.
Second, this patch introduces the concept of taskprocessor local data,
data that may be set on a taskprocessor and provided along with the data
pointer when a task is pushed using the ast_taskprocessor_push_local()
call. This allows the task to have both data specific to that
taskprocessor, in addition to data specific to that invocation.
With those two changes, the dispatch object can be removed completely,
and the message is simply refcounted and sent directly to the
taskprocessor.
Review: https://reviewboard.asterisk.org/r/2884/
........
Merged revisions 399887,400138,400178,400180-400181 from http://svn.asterisk.org/svn/asterisk/branches/12
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@400186 65c4cc65-6c06-0410-ace0-fbb531ad65f3
The patch from ASTERISK-21965 was committed perhaps a bit too hastily. Walter
and Tzafrir have pointed out numerous issues with the approach and have
propsed an alternative in r/2757. Since it's not a time critical issue and
is not worth holding up the release of 12 for it, I've gone ahead and reverted
r394939 from 12/trunk and re-opened ASTERISK-21965.
........
Merged revisions 397938 from http://svn.asterisk.org/svn/asterisk/branches/12
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@397939 65c4cc65-6c06-0410-ace0-fbb531ad65f3
The general gist is to have a clear boundary between old SIP stuff
and new SIP stuff by having the word "SIP" for old stuff and "PJSIP"
for new stuff. Here's a brief rundown of the changes:
* The word "Gulp" in dialstrings, functions, and CLI commands is now
"PJSIP"
* chan_gulp.c is now chan_pjsip.c
* Function names in chan_gulp.c that were "gulp_*" are now "chan_pjsip_*"
* All files that were "res_sip*" are now "res_pjsip*"
* The "res_sip" directory is now "res_pjsip"
* Files in the "res_pjsip" directory that began with "sip_*" are now "pjsip_*"
* The configuration file is now "pjsip.conf" instead of "res_sip.conf"
* The module info for all PJSIP-related files now uses "PJSIP" instead of "SIP"
* CLI and AMI commands created by Asterisk's PJSIP modules now have "pjsip" as
the starting word instead of "sip"
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@395764 65c4cc65-6c06-0410-ace0-fbb531ad65f3
This renames all files and API calls from several variants of
Stasis-HTTP to ARI including:
* Stasis-HTTP -> ARI
* STASIS_HTTP -> ARI
* stasis_http -> ari (ast_ari for global symbols, file names as well)
* stasis http -> ARI
Review: https://reviewboard.asterisk.org/r/2706/
(closes issue ASTERISK-22136)
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@395603 65c4cc65-6c06-0410-ace0-fbb531ad65f3
The ring tone provided in the sample indications.conf was incorrect. This patch
modifies the sample ring tone to be what it should:
ring = 425/400,0/200,425/400,0/2000
This brings it in line with the tone definition in DAHDI 2.7.0. (zonedata.c)
(closes issue ASTERISK-21997)
Reported by: Filip Jenicek
patches:
malaysia_ring.patch uploaded by phill (License 6277)
........
Merged revisions 394940 from http://svn.asterisk.org/svn/asterisk/branches/1.8
........
Merged revisions 394941 from http://svn.asterisk.org/svn/asterisk/branches/11
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@394942 65c4cc65-6c06-0410-ace0-fbb531ad65f3
This patch modifies the behavior of safe_asterisk in two ways:
(1) It modifies the Asterisk Makefile such that safe_asterisk is always
installed on a 'make install'. This was done as bugfixes in the
safe_asterisk script were not applied in previous version of Asterisk
without first removing the old version of the script.
(2) In order to keep a newly installed version of safe_asterisk from impacting
local modifications, a new config file - safe_asterisk.conf.sample - has
been provided. Settings that were previously modified in safe_asterisk can
be set there instead.
(closes issue ASTERISK-21965)
Reported by: Jeremy Kister
patches:
safe_asterisk.patch uploaded by jkister (License 6232)
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@394939 65c4cc65-6c06-0410-ace0-fbb531ad65f3
The ill conceived chan_agent is no more. It is now replaced by
app_agent_pool.
Agents login using the AgentLogin() application as before. The
AgentLogin() application no longer does any authentication.
Authentication is now the responsibility of the dialplan. (Besides, the
authentication done by chan_agent did not match what the voice prompts
asked for.)
Sample extensions.conf
[login]
; Sample agent 1001 login
; Set COLP for in between calls so the agent does not see the last caller COLP.
exten => 1001,1,Set(CONNECTEDLINE(all)="Agent Waiting" <1001>)
; Give the agent DTMF transfer and disconnect features when connected to a caller.
same => n,Set(CHANNEL(dtmf-features)=TX)
same => n,AgentLogin(1001)
same => n,NoOp(AGENT_STATUS is ${AGENT_STATUS})
same => n,Hangup()
[caller]
; Sample caller direct connect to agent 1001
exten => 800,1,AgentRequest(1001)
same => n,NoOp(AGENT_STATUS is ${AGENT_STATUS})
same => n,Hangup()
; Sample caller going through a Queue to agent 1001
exten => 900,1,Queue(agent_q)
same => n,Hangup()
Sample queues.conf
[agent_q]
member => Local/800@caller,,SuperAgent,Agent:1001
Under the hood operation overview:
1) Logged in agents wait for callers in an agents holding bridge.
2) Caller requests an agent using AgentRequest()
3) A basic bridge is created, the agent is notified, and caller joins the
basic bridge to wait for the agent.
4) The agent is either automatically connected to the caller or must ack
the call to connect.
5) The agent is moved from the agents holding bridge to the basic bridge.
6) The agent and caller talk.
7) The connection is ended by either party.
8) The agent goes back to the agents holding bridge.
To avoid some locking issues with the agent holding bridge, I needed to
make some changes to the after bridge callback support. The after bridge
callback is now a list of requested callbacks with the last to be added
the only active callback. The after bridge callback for failed callbacks
will always happen in the channel thread when the channel leaves the
bridging system or is destroyed.
(closes issue ASTERISK-21554)
Reported by: Matt Jordan
Review: https://reviewboard.asterisk.org/r/2657/
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@394417 65c4cc65-6c06-0410-ace0-fbb531ad65f3
When I initially wrote the configuration support for ARI users, I
determined the section type by a category prefix (i.e., [user-admin]).
This is neither idiomatic Asterisk configuration, nor is it really
that user friendly. This patch replaces the category prefix with a
type field in the section, which is much cleaner.
Review: https://reviewboard.asterisk.org/r/2664/
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@394076 65c4cc65-6c06-0410-ace0-fbb531ad65f3
The SLA code within app_meetme was written before asotbj2 had been
merged into Asterisk. Worse, support for reloads did not exist at first
and was added later as a bolt-on feature. I knew at the time that
reloading was not safe at all while SLA was in use, so the reload would
be queued up to execute when the system was idle. Unfortunately, this
approach was still prone to errors beyond the fact that this was the
only place in Asterisk where configuration was not reloaded
instantly when requested.
This patch converts various SLA objects to be reference counted objects
using astobj2. This allows reloads to be processed while the system is
in use. The code ensures that the objects will not disappear while one
of the other threads is using them. However, they will be immediately
removed from the global trunk and station containers so no new calls
will use them if removed from configuration.
Review: https://reviewboard.asterisk.org/r/2581/
........
Merged revisions 393928 from http://svn.asterisk.org/svn/asterisk/branches/1.8
........
Merged revisions 393929 from http://svn.asterisk.org/svn/asterisk/branches/11
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@393930 65c4cc65-6c06-0410-ace0-fbb531ad65f3
The appropriate settings for the Stasis threadpool is very system
specific, depending upon both workload and system configuration.
This patch adds a stasis.conf file which can be used to configure the
key attributes of the threadpool for the Stasis message bus.
(closes issue ASTERISK-21280)
Review: https://reviewboard.asterisk.org/r/2651/
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@393542 65c4cc65-6c06-0410-ace0-fbb531ad65f3
This patch adds authentication support to ARI.
Two authentication methods are supported. The first is HTTP Basic
authentication, as specified in RFC 2617[1]. The second is by simply
passing the username and password as an ?api_key query parameter
(which allows swagger-ui[2] to authenticate more easily).
ARI usernames and passwords are configured in the ari.conf file
(formerly known as stasis_http.conf). The user may be set to
`read_only`, which will prohibit the user from issuing POST, DELETE,
etc. Also, the user's password may be specified in either plaintext,
or encrypted using the crypt() function.
Several other notes about the patch.
* A few command line commands for seeing ARI config and status were
also added.
* The configuration parsing grew big enough that I extracted it to
its own file.
[1]: http://www.ietf.org/rfc/rfc2617.txt [2]:
https://github.com/wordnik/swagger-ui
(closes issue ASTERISK-21277)
Review: https://reviewboard.asterisk.org/r/2649/
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@393530 65c4cc65-6c06-0410-ace0-fbb531ad65f3
In addition to porting those features, they now enjoy greater feature parity
with one another. Specifically, AutoMixMon now has a start and stop
message that can be specified with TOUCH_MIXMONITOR_MESSAGE_START and
TOUCH_MIXMONITOR_MESSAGE_STOP.
(closes issue ASTERISK-21553)
Reported by: Matt Jordan
Review: https://reviewboard.asterisk.org/r/2620/
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@393309 65c4cc65-6c06-0410-ace0-fbb531ad65f3
1. Security events
2. Websocket support
3. Diversion header + redirecting support
4. An anonymous endpoint identifier
5. Inbound extension state subscription support
6. PIDF notify generation
7. One touch recording support (special thanks Sean Bright!)
8. Blind and attended transfer support
9. Automatic inbound registration expiration
10. SRTP support
11. Media offer control dialplan function
12. Connected line support
13. SendText() support
14. Qualify support
15. Inband DTMF detection
16. Call and pickup groups
17. Messaging support
Thanks everyone!
Side note: I'm reminded of the song "How Far We've Come" by Matchbox Twenty.
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@392565 65c4cc65-6c06-0410-ace0-fbb531ad65f3
In r386792, the ability to play prompts to the first caller in a call queue was
added. While this is arguably a bug fix for those who expect the first caller
to continue receiving prompts while the agent is dialed, it has the side effect
of preventing the first caller from hearing the agent immediately upon
bridging. This may not be a problem for those who really want this option, but
for those who didn't care whether or not the first caller in queue heard their
position, it was an issue.
This patch disables the ability for the first caller in the queue to hear
prompts and adds a new option, announce-to-first-user, to queues.conf. Those
who the behavior can enable it by setting this value to True.
Note that if we ever implement the ability to have the prompts be stopped
upon bridging, this option can be removed.
(closes issue ASTERISK-21782)
Reported by: Remi Quezada
........
Merged revisions 391215 from http://svn.asterisk.org/svn/asterisk/branches/1.8
........
Merged revisions 391241 from http://svn.asterisk.org/svn/asterisk/branches/11
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@391245 65c4cc65-6c06-0410-ace0-fbb531ad65f3
* The channel variable ATTENDED_TRANSFER_COMPLETE_SOUND is no longer
channel driver specific. If the channel variable is set on the
transferrer channel, the sound will be played to the target of an attended
transfer.
* The channel variable BRIDGEPEER becomes a comma separated list of peers
in a multi-party bridge. The BRIDGEPEER value can have a maximum of 10
peers listed. Any more peers in the bridge will not be included in the
list. BRIDGEPEER is not valid in holding bridges like parking since those
channels do not talk to each other even though they are in a bridge.
* The channel variable BRIDGEPVTCALLID is only valid for two party bridges
and will contain a value if the BRIDGEPEER's channel driver supports it.
* The channel variable DYNAMIC_PEERNAME is redundant with BRIDGEPEER and
is removed. The more useful DYNAMIC_WHO_ACTIVATED gives the channel name
that activated the dynamic feature.
* The channel variables DYNAMIC_FEATURENAME and DYNAMIC_WHO_ACTIVATED are
set only on the channel executing the dynamic feature. Executing a
dynamic feature on the bridge peer in a multi-party bridge will execute it
on all peers of the activating channel.
(closes issue ASTERISK-21555)
Reported by: Matt Jordan
Review: https://reviewboard.asterisk.org/r/2582/
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@390771 65c4cc65-6c06-0410-ace0-fbb531ad65f3
Breaks many things until they can be reworked. A partial list:
chan_agent
chan_dahdi, chan_misdn, chan_iax2 native bridging
app_queue
COLP updates
DTMF attended transfers
Protocol attended transfers
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@389378 65c4cc65-6c06-0410-ace0-fbb531ad65f3
CallforwardNoAnswer uses a sched to determine when to forward the call.
Defaults to 20secs but configurable in skinny.conf.
Adds dialType to each subchannel structure to be used to differentiate
between normal dials that result in a call being placed (default) and
other uses for the skinny_dialer (such as cfwd digit collection).
Restructured all cfwd handling to use this new arrangement.
(closes issue ASTERISK-21292)
Reported by: wedhorn
Tested by: myself
Patches:
skinny-callfwdnoans03.diff uploaded by wedhorn (license 5019)
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@389097 65c4cc65-6c06-0410-ace0-fbb531ad65f3
In order to get people familiar with the Stasis message bus, it would
be useful to have something of a tutorial. Since I'm not clever enough
to think of some cool integration we could do with Twitter, I settled
for something that might actually be useful.
This patch adds a res_statsd.so module, which implements a basic
statsd[1] client. Statsd is a very simple statistics gathering server,
which can publish its results to a backend graphing engine, like
Graphite[2]. There are several different Statsd server
implementations[3], so you can pick what works best for your
environment.
The actual example of how to use the Stasis message bus is in
res_chan_stats.so. This module demonstrates how to use subscriptions
and the message router by monitoring messages and posting channels
stats to the statsd server.
A wiki page walking through res_chan_stats.so is forthcoming.
[1]: https://github.com/etsy/statsd/
[2]: http://graphite.readthedocs.org/en/latest/
[3]: http://joemiller.me/2011/09/21/list-of-statsd-server-implementations/
Review: https://reviewboard.asterisk.org/r/2460/
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@386624 65c4cc65-6c06-0410-ace0-fbb531ad65f3
The pimp_my_sip branch is being merged at this point because
it offers basic functionality, and from an API standpoint, things
are complete.
SIP work is *not* feature-complete; however, with the completion
of the SUBSCRIBE/NOTIFY API, all APIs (except a PUBLISH API) have
been created, and thus it is possible for developers to attempt
to create new SIP work.
API documentation can be found in the doxygen in the code, but
usability documentation is still lacking.
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@386540 65c4cc65-6c06-0410-ace0-fbb531ad65f3
The API itself is documented using Swagger, a lightweight mechanism for
documenting RESTful API's using JSON. This allows us to use swagger-ui
to provide executable documentation for the API, generate client
bindings in different languages, and generate a lot of the boilerplate
code for implementing the RESTful bindings. The API docs live in the
rest-api/ directory.
The RESTful bindings are generated from the Swagger API docs using a set
of Mustache templates. The code generator is written in Python, and
uses Pystache. Pystache has no dependencies, and be installed easily
using pip. Code generation code lives in rest-api-templates/.
The generated code reduces a lot of boilerplate when it comes to
handling HTTP requests. It also helps us have greater consistency in the
REST API.
(closes issue ASTERISK-20891)
Review: https://reviewboard.asterisk.org/r/2376/
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@386232 65c4cc65-6c06-0410-ace0-fbb531ad65f3
The new inband_on_proceeding option causes Asterisk to assume inband audio
may be present when a PROCEEDING message is received.
Q.931 Section 5.1.2 says the network cannot assume that the CPE side has
attached to the B channel at this time without explicitly sending the
progress indicator ie informing the CPE side to attach to the B channel
for audio. However, some non-compliant ISDN switches send a PROCEEDING
without the progress indicator ie indicating inband audio is available and
assume that the CPE device has connected the media path for listening to
ringback and other messages.
ASTERISK-17834 which causes this issue was dealing with a non-compliant
network switch.
(closes issue ASTERISK-21151)
Reported by: Gianluca Merlo
Tested by: rmudgett
........
Merged revisions 384685 from http://svn.asterisk.org/svn/asterisk/branches/1.8
........
Merged revisions 384689 from http://svn.asterisk.org/svn/asterisk/branches/11
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@384696 65c4cc65-6c06-0410-ace0-fbb531ad65f3
This patch adds support for RFC 3327 "Path" headers. This can be enabled in
sip.conf using the 'supportpath' setting, either on a global basis or on a
peer basis. This setting enables Asterisk to route outgoing out-of-dialog
requests via a set of proxies by using a pre-loaded route-set defined by the
Path headers in the REGISTER request. This patch also adds Realtime support
for dynamically updating the Path information for a peer.
A huge thank-you to Klaus Darillion and Olle E Johansson for their efforts
in writing this patch.
Review: https://reviewboard.asterisk.org/r/2235/
Review: https://reviewboard.asterisk.org/r/991/
(closes issue ASTERISK-16884)
Reported by: klaus3000
Tested by: klaus3000, oej, mjordan
patches:
path-1.8.0-patch.txt uploaded by klaus3000 (License 5054)
oolong-path-support-trunk in team branch by oej (License 5267)
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@382440 65c4cc65-6c06-0410-ace0-fbb531ad65f3
ConfBridge and Page require that there always be a default bridge and user
profile available. While properties of the default profiles can be overriden
in the configuration file, removing them can create situations where neither
application can function properly.
This patch ensures that if an administrator removes the profiles from the
confbridge.conf configuration file, the profiles are added upon load.
Documentation clarifying this has been added to the confbridge.conf.sample file.
Review: https://reviewboard.asterisk.org/r/2356/
(closes issue AST-1115)
Reported by: John Bigelow
Tested by: John Bigelow
........
Merged revisions 382066 from http://svn.asterisk.org/svn/asterisk/branches/11
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@382067 65c4cc65-6c06-0410-ace0-fbb531ad65f3
Patch adds all the packet and structure stuff to skinny to enable setting
service URLs in skinny, such as corporate directories.
This stuff is only relevant during load/unload as when activated. Also
some minor changes removing duplicated counting of addons and speedials in
handle_skinny_show_devices.
Review: https://reviewboard.asterisk.org/r/2321/
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@381718 65c4cc65-6c06-0410-ace0-fbb531ad65f3
This patch allows a module to define its configuration in XML in source, such
that it can be parsed by the XML documentation engine. Documentation is
generated in a two-pass approach:
1. The documentation is first generated from the XML pulled from the source
2. The documentation is then enhanced by the registration of configuration
options that use the configuration framework
This patch include configuration documentation for the following modules:
* chan_motif
* res_xmpp
* app_confbridge
* app_skel
* udptl
Two new CLI commands have been added:
* config show help - show configuration help by module, category, and item
* xmldoc dump - dump the in-memory representation of the XML documentation to
a new XML file.
Review: https://reviewboard.asterisk.org/r/2278
Review: https://reviewboard.asterisk.org/r/2058
patches:
on review 2058 uploaded by twilson
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@381527 65c4cc65-6c06-0410-ace0-fbb531ad65f3
These two variables were previously not being set when comebacktoorigin=yes
and the example configs seemed to imply that they should be. Since there
is no harm in this and since calls that are sent back to origin are capable
of continuing in the dialplan, this seemed like a no-brainer. Also it
supports some bridging tests I've been working on.
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@381068 65c4cc65-6c06-0410-ace0-fbb531ad65f3
Make skinny reset vmexten and immeddial to '\0' on reload to ensure that
it is set to '\0' if the appropriate item is removed/commented in
skinny.conf. Also small fix re immeddial char in skinny.conf and add
immedial setting to skinny show settings.
(closes issue ASTERISK-21037)
Reported by: snuffy
Tested by: snuffy, myself
Patches:
immed_dial_fix.diff uploaded by snuffy (license 5024)
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@380925 65c4cc65-6c06-0410-ace0-fbb531ad65f3
Sorcery is a unifying data access layer which provides a pluggable mechanism to allow
object creation, retrieval, updating, and deletion using different backends (or wizards).
This is a fancy way of saying "one interface to rule them all" where them is configuration,
realtime, and anything else that comes along.
Review: https://reviewboard.asterisk.org/r/2259/
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@380069 65c4cc65-6c06-0410-ace0-fbb531ad65f3
Adds a dial softkey when the device is in DAFD. The softkey is greyed (unusable)
until a possible dialplan match is entered. Code includes updating
transmit_selectsoftkeys to allow the use of a button mask. Also add option
to use # or * as a dial now button. Original patch by snuffy cleaned up by myself.
Review: https://reviewboard.asterisk.org/r/2277/
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@380057 65c4cc65-6c06-0410-ace0-fbb531ad65f3
When ringinuse=no queue members can receive more than one call if these
calls happen at nearly the same time.
* Fix so a queue member does not receive more than one call from a queue.
NOTE: This fix does not prevent multiple calls to a member if the member
is in more than one queue.
* Did some refactoring to eliminate some code redundancy.
(issue ASTERISK-16115)
Reported by: nik600
Patches:
jira_asterisk_16115_single_q_v1.8.patch (license #5621) patch uploaded by rmudgett
Modified
* Revert the -r341580 and -r341599 changes adding the queues.conf
check_state_unknown option as it was added in an attempt to fix this
problem. The fix did not need to be optional. The fix should not have
tried to explicitly set the device state. Setting the device state by
something other than the device introduces a race condition. I also could
not see how the change would be effective other than delaying the
app_queue code long enough for the device state to propagate to app_queue.
........
Merged revisions 378663 from http://svn.asterisk.org/svn/asterisk/branches/1.8
........
Merged revisions 378683 from http://svn.asterisk.org/svn/asterisk/branches/10
........
Merged revisions 378687 from http://svn.asterisk.org/svn/asterisk/branches/11
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@378688 65c4cc65-6c06-0410-ace0-fbb531ad65f3
This is an interesting feature that allows additional strings to be used to
search the Directory, primarily intended to be used with nicknames, but could
be used with affiliations and the like. Because the name field is used in
more than one place (such as email notifications), it is important that these
additional strings not be placed in the name field, but be specified
separately.
Review: https://reviewboard.asterisk.org/r/2244/
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@378414 65c4cc65-6c06-0410-ace0-fbb531ad65f3
configured codecs to take precedence on an outgoing call.
This change introduces a new peer configuration property named
'ignore_requested_pref' that causes the requested codec to be ignored when
determining the preferred codec for an outgoing call leg. The consequence is
that Asterisk's usual efforts to prefer avoiding transcoding can be overridden
on a peer-by-peer basis where appropriate.
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@377971 65c4cc65-6c06-0410-ace0-fbb531ad65f3
Based on feedback from numerous individuals this patch tweaks incoming calls
to first look for an extension with the name of the endpoint. If no such extension
exists the call will silently fall back to the "s" extension as it previously
did.
........
Merged revisions 376983 from http://svn.asterisk.org/svn/asterisk/branches/11
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@376984 65c4cc65-6c06-0410-ace0-fbb531ad65f3
With ICE support enabled in chan_sip and a large number of interfaces on the system it was
possible for the produced SDP to be truncated due to some fixed size buffers. These buffers
have now been changed so they will dynamically grow as needed.
ICE support is now also enabled by default in res_rtp_asterisk to provide a smoother experience
for chan_motif users where it is required. To maintain the previous behavior in chan_sip it is
no longer enabled by default there.
(closes issue ASTERISK-20643)
Reported by: coopvr
........
Merged revisions 376130 from http://svn.asterisk.org/svn/asterisk/branches/11
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@376131 65c4cc65-6c06-0410-ace0-fbb531ad65f3
A regression was introduced in chan_sip by changes to sip reload introduced by
r349097. That patch moved peer purging from the beginning of the reload to
after the general configuration was finished. This patch fixes that by undoing
the repositioning of the original peer purging code and using a similar
function after performing general configuration that purges only autocreated
peers that were created when persist mode isn't enabled.
(closes issue ASTERISK-20611)
Reported by: Alisher
Review: https://reviewboard.asterisk.org/r/2171/
........
Merged revisions 375575 from http://svn.asterisk.org/svn/asterisk/branches/11
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@375576 65c4cc65-6c06-0410-ace0-fbb531ad65f3
Commiting this on behalf of Kaloyan Kovachev (license 5506).
AlarmReceiver now supports the following DTMF signaling types:
- ContactId
- 4x1
- 4x2
- High Speed
- Super Fast
We are also auto-detecting which signaling is being received. So support for
those protocols should work out-the-box. Correctly identify ALAW / ULAW calls.
Some enhanced protection for broken panels and malicious callers where added.
(closes issue ASTERISK-20289)
Reported by: Kaloyan Kovachev
Review: https://reviewboard.asterisk.org/r/2088/
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@375150 65c4cc65-6c06-0410-ace0-fbb531ad65f3
Since there are a number of legacy devices out there that fail to handle ICE
candidates properly (which is a nice way of saying something much uglier),
disable it by default.
Support for ICE candidates can be enabled in rtp.conf using the icesupport
setting.
........
Merged revisions 374676 from http://svn.asterisk.org/svn/asterisk/branches/11
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@374677 65c4cc65-6c06-0410-ace0-fbb531ad65f3
Asterisk's DTMF Specifications are based on AT&T specs, which may not be compatible in other countries.
Various countries have different specifications for the maximum power level differences
between the DTMF low group and high group of frequencies.
Power level difference between frequencies for different Administrations/RPOAs
NTT = Max. 5 dB
AT&T = 4dB(reverse) to 8dB(normal)
Danish = Max. 6 dB
Australian = Max. 10 dB
Brazilian = Max. 9 dB
ETSI = Max. 6 dB from ETSI ES 201 235-3 V1.3.1 (2006-03)
Now allow 4 variables to be individually configured in dsp.conf, with reasonable min/max of 2dB to 20dB.
Default is AT&T specifications
Add's the following variables to dsp.conf
;dtmf_normal_twist=6.31
;dtmf_reverse_twist=2.51
;relax_dtmf_normal_twist=6.31
;relax_dtmf_reverse_twist=3.98
(closes issue ASTERISK-20442)
Reported by: tbsky
Tested by: tbsky,alecdavis
alecdavis (license 585)
Review https://reviewboard.asterisk.org/r/2141/
........
Merged revisions 374384 from http://svn.asterisk.org/svn/asterisk/branches/1.8
........
Merged revisions 374385 from http://svn.asterisk.org/svn/asterisk/branches/10
........
Merged revisions 374386 from http://svn.asterisk.org/svn/asterisk/branches/11
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@374387 65c4cc65-6c06-0410-ace0-fbb531ad65f3
The SIP session timer mechanism contains a mandatory 'refresher' parameter
(included in the Session-Expires header) which is used in the session timer
offer/answer signaling within a SIP Invite dialog. It looks like asterisk is
interpreting the uac resp. uas role only as the initial role of client and
server (caller is uac, callee is uas). The standard rfc 4028 however assigns
the client role to the ((RE)-Invite) requester, the server role to the
((RE)-Invite) responder.
This patch has Asterisk track the actual refresher as "us" or "them" as opposed
to relying on just the configured "uas" or "uac" properties.
(closes issue AST-922)
Reported by: Thomas Airmont
Review: https://reviewboard.asterisk.org/r/2118/
........
Merged revisions 373652 from http://svn.asterisk.org/svn/asterisk/branches/1.8
........
Merged revisions 373665 from http://svn.asterisk.org/svn/asterisk/branches/10
........
Merged revisions 373690 from http://svn.asterisk.org/svn/asterisk/branches/11
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@373691 65c4cc65-6c06-0410-ace0-fbb531ad65f3
This patch removes the turnport configuration property and changes the
turnaddr property to be a combined host[:port] configuration string. The
patch also modifies the documentation in the example configuration to
reflect the property changes and adds some additional text indicating how
the STUN port is configured.
(closes issue ASTERISK-20344)
Reported by: beagles
Tested by: beagles
Review: https://reviewboard.asterisk.org/r/2111/
........
Merged revisions 373403 from http://svn.asterisk.org/svn/asterisk/branches/11
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@373404 65c4cc65-6c06-0410-ace0-fbb531ad65f3
As mentioned on the review for this, WebRTC has moved towards choosing
DTLS-SRTP as the mechanism for key exchange for SRTP. This commit adds
support for this but makes it available for normal SIP clients as well.
Testing has been done to ensure that this introduces no regressions with
existing behavior and also that it functions as expected.
Review: https://reviewboard.asterisk.org/r/2113/
........
Merged revisions 373229 from http://svn.asterisk.org/svn/asterisk/branches/11
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@373234 65c4cc65-6c06-0410-ace0-fbb531ad65f3
Sets INUSE when no free agents, NOT_INUSE when an agent is free.
modifes handle_statechange() scan members loop to scan for a free agent
and updates the Queue:queuename_avial devstate.
Previously exited early if the member was found in the queue.
Now Exits later when both a member was found, and a free agent was found.
alecdavis (license 585)
Reported by: Alec Davis
Tested by: alecdavis
Review: https://reviewboard.asterisk.org/r/2121/
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@373188 65c4cc65-6c06-0410-ace0-fbb531ad65f3
With this option in use, it may be necessary to regulate your log files
externally.
(closes issue ASTERISK-20189)
Reported by: Jaco Kroon
Patches:
asterisk-logger-norotate-trunk.patch uploaded by Jaco Kroon (license 5671)
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@372976 65c4cc65-6c06-0410-ace0-fbb531ad65f3
Prior to 1.8, it was not necessary for an explicit "type" to be set for an
asterisk LDAP realtime peer. Now the routine find_peer actually checks the
type field during registration and fails to find the peer if it is not set.
The attached patch makes the realtime type equal whatever type is being
searched for if the type is 0 upon return from routine build_peer.
(closes issue ASTERISK-17222)
Reported by: John Covert
Patch by: David Vossel
Tested by: Darren Sessions
Review: https://reviewboard.asterisk.org/r/2095/
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@372290 65c4cc65-6c06-0410-ace0-fbb531ad65f3
This patch adds named calledgroups/pickupgroups to Asterisk. Named groups are
implemented in parallel to the existing numbered callgroup/pickupgroup
implementation. However, unlike the existing implementation, which is limited
to a maximum of 64 defined groups, the number of defined groups allowed for
named callgroups/pickupgroups is effectively unlimited.
Named groups are configured with the keywords "namedcallgroup" and
"namedpickupgroup". This corresponds to the numbered group definitions of
"callgroup" and "pickupgroup". Note that as the implementation of named groups
coexists with the existing numbered implementation, a defined named group of
"4" does not equate to numbered group 4.
Support for the named groups has been added to the SIP, DAHDI, and mISDN channel
drivers.
Review: https://reviewboard.asterisk.org/r/2043
Uploaded by:
Guenther Kelleter(license #6372)
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@370831 65c4cc65-6c06-0410-ace0-fbb531ad65f3
This is a patch from kkm from review board.
This is useful for adding headers to REFER requests that
emanate from a Transfer() dialplan application call.
This also fixes some uses of the Referred-by header, removing
an extra set of angle brackets.
I've modified the reporter's original patch to not require
any additions to the sip_refer header and to just remove the
referred_by_name from sip_refer since it is no longer needed
or used.
(closes Issue ASTERISK-17639)
reported by Kirill Katsnelson
Patches:
019059-sip-refer-addheaders-trunk-353549.diff
uploaded by Kirill Katsnelson (license #5845)
Review: https://reviewboard.asterisk.org/r/1159
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@370691 65c4cc65-6c06-0410-ace0-fbb531ad65f3
With this option set, channel variables can be set on
every manager originate. The Variable header can still
be used to set additional channel variables for individual
calls if desired.
This work was completed by Olle Johansson on review board.
I have applied the review feedback and am committing it in
order to get this into trunk before Asterisk 11 is branched.
Review: https://reviewboard.asterisk.org/r/1412
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@370681 65c4cc65-6c06-0410-ace0-fbb531ad65f3
This patch adds Named ACL functionality to Asterisk. This allows system
administrators to define an ACL and refer to it by a unique name. Configurable
items can then refer to that name when specifying access control lists.
It also includes updates to all core supported consumers of ACLs. That includes
manager, chan_sip, and chan_iax2. This feature is based on the deluxepine-trunk
by Olle E. Johansson and provides a subset of the Named ACL functionality
implemented in that branch. For more information on this feature, see acl.conf
and/or the Asterisk wiki.
Review: https://reviewboard.asterisk.org/r/1978/
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@369959 65c4cc65-6c06-0410-ace0-fbb531ad65f3
This channel driver is a replacement for both chan_gtalk and chan_jingle but adds additional features not found in either.
These features include full configuration reload, video, full codec support, bidirectional cause code mapping, hold,
unhold, and ringing indication. It is also compliant with the current published Jingle and Google Jingle specifications.
The original Google Talk protocol is also supported for Google Voice interoperability.
You may ask yourself though where the name motif comes from... and I would say to you... music!
motif: a perceivable or salient recurring fragment or succession of notes
Sorta like a jingle!
Review: https://reviewboard.asterisk.org/r/1917/
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@369769 65c4cc65-6c06-0410-ace0-fbb531ad65f3
options are documented in config sample
sample config rename to proper name - ooh323.conf
To change media address ooh323 send empty TCS if there was
completed TCS exchange or send facility forwardedelements
with new fast start proposal if not.
Then close transmit logical channels and renew TCS exchange.
If new fast start proposal is received then ooh323 stack call back
channel driver routine to change rtp address in the rtp instance.
If empty TCS is received then close transmit logical channels and
renew TCS exchange
Review: https://reviewboard.asterisk.org/r/1607/
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@369613 65c4cc65-6c06-0410-ace0-fbb531ad65f3
Hangup handlers are an alternative to the h extension. They can be used
in addition to the h extension. The idea is to attach a Gosub routine to
a channel that will execute when the call hangs up. Whereas which h
extension gets executed depends on the location of dialplan execution when
the call hangs up, hangup handlers are attached to the call channel. You
can attach multiple handlers that will execute in the order of most
recently added first.
(closes issue ASTERISK-19549)
Reported by: Mark Murawski
Tested by: rmudgett
Review: https://reviewboard.asterisk.org/r/2002/
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@369493 65c4cc65-6c06-0410-ace0-fbb531ad65f3
Allows the setting of flags via the config options api.
For example, code like this:
#define OPT1 1 << 0
#define OPT2 1 << 1
#define OPT3 1 << 2
struct thing {
unsigned int flags;
};
and a config like this:
[blah]
opt1=yes
opt2=no
opt3=yes
Review: https://reviewboard.asterisk.org/r/2004/
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@369454 65c4cc65-6c06-0410-ace0-fbb531ad65f3
Presence support has been added. This is accomplished by
allowing for presence hints in addition to device state
hints. A dialplan function called PRESENCE_STATE has been
added to allow for setting and reading presence. Presence
can be transmitted to Digium phones using custom XML
elements in a PIDF presence document.
Voicemail has new APIs that allow for moving, removing,
forwarding, and playing messages. Messages have had a new
unique message ID added to them so that the APIs will work
reliably. The state of a voicemail mailbox can be obtained
using an API that allows one to get a snapshot of the mailbox.
A voicemail Dialplan App called VoiceMailPlayMsg has been
added to be able to play back a specific message.
Configuration hooks have been added. Configuration hooks
allow for a piece of code to be executed when a specific
configuration file is loaded by a specific module. This is
useful for modules that are dependent on the configuration
of other modules.
chan_sip now has a public method that allows for a custom
SIP INFO request to be sent mid-dialog. Digium phones use
this in order to display progress bars when files are played.
Messaging support has been expanded a bit. The main
visible difference is the addition of an AMI action
MessageSend.
Finally, a ParkingLots manager action has been added in order
to get a list of parking lots.
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@368435 65c4cc65-6c06-0410-ace0-fbb531ad65f3
When Asterisk servers are set up back-to-back, and
direct media is to be used betweeen endpoints, it is
fairly common for the two Asterisk servers to send
direct media reinvites to each other simultaneously.
This results in 491s and ACKs being exchanged between
the servers. While the media eventually gets set up
properly, the problem is that there can be a noticeable
delay for the streams to stabilize.
This patch adds a new directmedia option called "outgoing".
With this set, an immediate direct media reinvite will only
be sent if the call direction is outgoing. For incoming
dialogs, an immediate direct media reinvite will not be sent,
but further "reactionary" direct media reinvites may be sent.
Review: https://reviewboard.asterisk.org/r/1954
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@368143 65c4cc65-6c06-0410-ace0-fbb531ad65f3
Adds a number of methods for controlling the setting of 'ringinuse'
which is basically the same concept as the old ignorebusy setting,
only now the per member setting always controls whether or not the
member is actually ringed while in use. A CLI command and a manager
action have been added to change a given queue member's ringinuse
option while Asterisk is running and the an argument has been added
for adding members with deliberately set ringinuse in queues.conf
Some effort has been made to ensure compatability with dialplans and
databases still referring to 'ignorebusy'.
(issue ASTERISK-19536)
reported by: Philippe Lindheimer
Review: https://reviewboard.asterisk.org/r/1919/
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@367080 65c4cc65-6c06-0410-ace0-fbb531ad65f3
This is the starting point for the Asterisk 11: Who Hung Up work and provides
a framework which will allow channel drivers to report the types of hangup
cause information available in SIP_CAUSE without incurring the overhead of the
MASTER_CHANNEL dialplan function. The initial implementation only includes
cause generation for chan_sip and does not include cause code translation
utilities.
This change deprecates SIP_CAUSE and replaces its method of reporting cause
codes with the new framework. This change also deprecates the 'storesipcause'
option in sip.conf.
Review: https://reviewboard.asterisk.org/r/1822/
(Closes issue SWP-4221)
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@366408 65c4cc65-6c06-0410-ace0-fbb531ad65f3
If you hit the wrong DTMF digit trying to accept/decline a FollowMe call,
you had to wait for the prompt to repeat to try again.
* Make FollowMe compare the last DTMF digits received to the
accept/decline matching strings.
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@365951 65c4cc65-6c06-0410-ace0-fbb531ad65f3
If enabled using the keepalive option in sip.conf a small packet will be sent
at a regular interval to keep the NAT mapping open. This is lightweight as the
remote side does not need to parse and handle a SIP message.
(closes issue AST-783)
Review: https://reviewboard.asterisk.org/r/1756/
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@364500 65c4cc65-6c06-0410-ace0-fbb531ad65f3
Asterisk has a setting for the minimum allowed DTMF. If we get shorter
DTMF tones, these will be changed to the minimum on the outbound call
leg.
(closes issue ASTERISK-19772)
Review: https://reviewboard.asterisk.org/r/1882/
Reported by: oej
Tested by: oej
Patches by: oej
Thanks to the reviewers.
1.8 branch for this patch: agave-dtmf-duration-asterisk-conf-1.8
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@363558 65c4cc65-6c06-0410-ace0-fbb531ad65f3
Several telcos bring the BRI PTMP layer 1 down when the line is idle.
When layer 1 goes down, Asterisk cannot make outgoing calls. Incoming
calls could fail as well because the alarm processing is handled by a
different code path than the Q.931 messages.
* Add the layer1_presence configuration option to ignore layer 1 alarms
when the telco brings layer 1 down. This option can be configured by span
while the similar DAHDI driver teignorered=1 option is system wide. This
option unlike layer2_persistence does not require libpri v1.4.13 or newer.
Related to JIRA AST-598
JIRA ABE-2845
........
Merged revisions 362428 from http://svn.asterisk.org/svn/asterisk/branches/1.8
........
Merged revisions 362429 from http://svn.asterisk.org/svn/asterisk/branches/10
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@362430 65c4cc65-6c06-0410-ace0-fbb531ad65f3
ASTERISK-18809 eliminated the legacy macro invocation of the stdexten in
favor of the Gosub method without a means of backwards compatibility.
(issue ASTERISK-18809)
(closes issue ASTERISK-19457)
Reported by: Matt Jordan
Tested by: rmudgett
Review: https://reviewboard.asterisk.org/r/1855/
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@361998 65c4cc65-6c06-0410-ace0-fbb531ad65f3
Added new chan_dahdi.conf colp_send option parameter to block connected
line updates per span.
(closes issue ASTERISK-17025)
Reported by: Michael Smith
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@358997 65c4cc65-6c06-0410-ace0-fbb531ad65f3
For analog lines, enables Asterisk to use dialtone detection per channel
if an incoming call was hung up before it was answered. If dialtone is
detected, the call is hung up.
no: Disabled. (Default)
yes: Look for dialtone for 10000 ms after answer.
<number>: Look for dialtone for the specified number of ms after answer.
always: Look for dialtone for the entire call. Dialtone may return
if the far end hangs up first.
dialtone_detect=yes
dialtone_detect=5000
dialtone_detect=always
(closes issue ASTERISK-19316)
Reported by: Jeremy Pepper
Patch by: Jeremy Pepper
Tested by: rmudgett,Jeremy Pepper
Review: https://reviewboard.asterisk.org/r/1737/
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@358344 65c4cc65-6c06-0410-ace0-fbb531ad65f3
This commit adds GoSub alternatives to connected line, redirecting, and CCSS
macro hooks so that macro can finally be deprecated. This also adds
deprecation warnings for those features when used and in documentation.
Review: https://reviewboard.asterisk.org/r/1760/
(closes issue SWP-4256)
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@357013 65c4cc65-6c06-0410-ace0-fbb531ad65f3
send_diversion=no will prevent Diversion headers from being added to SIP
requests. This doesn't prevent Diversion from being added with dialplan
such as with SIPAddHeader.
(closes issue ASTERISK-16862)
Reported by: rsw686
Review: https://reviewboard.asterisk.org/r/1769/
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@356987 65c4cc65-6c06-0410-ace0-fbb531ad65f3
This change permits each verbose destination (consoles, logger) to have its
own concept of what the verbosity level is. The big feature here is that
the logger will now be able to capture a particular verbosity level without
condemning each console to need to suffer that level of verbosity.
Additionally, a stray 'core set verbose' will no longer change what will go
to the log.
Review: https://reviewboard.asterisk.org/r/1599/
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@355413 65c4cc65-6c06-0410-ace0-fbb531ad65f3
There can only be one database connection in res_config_pgsql just like
res_config_sqlite. If the connection is lost, the connection may not get
reestablished to the same database if the res_pgsql.conf and
extconfig.conf files are inconsistent.
* Made only use the configured database from res_pgsql.conf.
* Fixed potential buffer overwrite of last[] in config_pgsql().
(closes issue ASTERISK-16982)
Reported by: german aracil boned
Review: https://reviewboard.asterisk.org/r/1731/
........
Merged revisions 354953 from http://svn.asterisk.org/svn/asterisk/branches/1.8
........
Merged revisions 354959 from http://svn.asterisk.org/svn/asterisk/branches/10
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@354964 65c4cc65-6c06-0410-ace0-fbb531ad65f3
This patch adds the auto_force_rport and auto_comedia NAT options. It
also converts the nat= setting to a list of comma-separated combinable
options: no, force_rport, comedia, auto_force_rport, and auto_comedia.
nat=yes remains as an undocumented option equal to
"force_rport,comedia". The first instance of 'yes' or 'no' in the list
stops parsing and overrides any previously set options. If an auto_*
option is specified with its non-auto_ counterpart, the auto setting
takes precedence.
This patch builds upon the patch posted to ASTERISK-17860 by JIRA user
pedro-garcia.
(closes issue ASTERISK-17860)
Review: https://reviewboard.asterisk.org/r/1698/
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@354597 65c4cc65-6c06-0410-ace0-fbb531ad65f3
This patch removes res_ais and introduces a new module, res_corosync.
The OpenAIS project is deprecated and is now just a wrapper around
Corosync. This module provides the same functionality using the same
core infrastructure, but without the use of the deprecated components.
Technically res_ais could have been used with an AIS implementation other
than OpenAIS, but that is the only one I know of that was ever used.
Review: https://reviewboard.asterisk.org/r/1700/
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@354046 65c4cc65-6c06-0410-ace0-fbb531ad65f3
Asterisk now supports using ODBC with databases where a single schema must be
selected. Previously, INSERTs would fail because they did not take into
account extra fields cause by having multiple schemas. This also corrects
some SQL resource leaks.
(closes issue ASTERISK-17106)
Patch-by: Alexander Frolkin
Patch-by: Tilgnman Lesher
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@353964 65c4cc65-6c06-0410-ace0-fbb531ad65f3
* Removes references to tlsbindport from http.conf.sample and manager.conf.sample
* Properly bind to port specified in tlsbindaddr, using the default port if specified.
* On a reload, properly close socket if the service has been disabled.
A note has been added to UPGRADE.txt to indicate how ports must be set for TLS.
(closes issue ASTERISK-16959)
reported by Olaf Holthausen
(closes issue ASTERISK-19201)
reported by Chris Mylonas
(closes issue ASTERISK-19204)
reported by Chris Mylonas
Review: https://reviewboard.asterisk.org/r/1709
........
Merged revisions 353770 from http://svn.asterisk.org/svn/asterisk/branches/1.8
........
Merged revisions 353820 from http://svn.asterisk.org/svn/asterisk/branches/10
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@353821 65c4cc65-6c06-0410-ace0-fbb531ad65f3
The CEL eventtype field for ODBC and PGSQL backends should be USER_DEFINED
instead of the user defined event name supplied by the CELGenUserEvent
application. If the field is output as a number, the user defined name
does not have a value and is always output as 21 for USER_DEFINED and the
userdeftype field would be required to supply the user defined name.
The following CEL backends (cel_odbc, cel_pgsql, cel_custom, cel_manager,
and cel_sqlite3_custom) can be independently configured to remove this
inconsistency.
* Allows cel_manager, cel_custom, and cel_sqlite3_custom to behave the
same way.
(closes issue ASTERISK-17189)
Reported by: Bryant Zimmerman
Review: https://reviewboard.asterisk.org/r/1669/
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@353648 65c4cc65-6c06-0410-ace0-fbb531ad65f3
This is a feature patch which allows an 'announcement' option to be specified in
musiconhold.conf which should be set to the name of a sound. If a valid sound is
specified for this option, then it will be played on that music on hold class whenever
a channel bound to that class is put on hold as well as when Asterisk is able to detect
that a song has ended before starting the next song (excludes external players).
(closes ASTERISK-18977)
Reported by: Timo Teräs
Patches:
asterisk-moh-announcement.diff uploaded by Timo Teräs (license 5409)
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@352134 65c4cc65-6c06-0410-ace0-fbb531ad65f3
* Adds per-parking lot options comebackcontext and comebackdialtime
* Makes comebacktoorigin settable per parking lot
* Sets a PARKER channel variable when comebacktoorigin is disabled
(closes issue ASTERISK-16643)
Reported by: Mitch Sharp (bluecrow76)
Patches:
asterisk-1.6.2.17.2-park-features-comebackcontext-consolidated-v3.diff by Mitch Sharp (bluecrow76) license 5231
with updates by me.
Review: https://reviewboard.asterisk.org/r/1674
Review: https://reviewboard.asterisk.org/r/963
Reviewed by Richard Mudgett
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@351913 65c4cc65-6c06-0410-ace0-fbb531ad65f3
In order to better handle RTP sources with strictrtp enabled (which is now default in 10)
using the learning mode to figure out new sources when they change is handled by checking
for a number of consecutive (by sequence number) packets received to an rtp struct
based on a new configurable value called 'probation'. Also, during learning mode instead
of liberally accepting all packets received, we now reject packets until a clear source
has been determined.
Review: https://reviewboard.asterisk.org/r/1663/
........
Merged revisions 351287 from http://svn.asterisk.org/svn/asterisk/branches/1.8
........
Merged revisions 351289 from http://svn.asterisk.org/svn/asterisk/branches/10
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@351290 65c4cc65-6c06-0410-ace0-fbb531ad65f3
Multiple revisions 350555,350571
........
r350555 | rmudgett | 2012-01-13 11:12:51 -0600 (Fri, 13 Jan 2012) | 12 lines
Add missing CEL logging fields to various CEL backends.
* Add missing eventextra to cel_psql.c and cel_odbc.c.
* Add missing PeerAccount and EventExtra to cel_manager.c.
* Add missing userdeftype support for cel_custom.conf.sample and
cel_sqlite3_custom.conf.sample.
(closes issue ASTERISK-17190)
Reported by: Bryant Zimmerman
........
r350571 | rmudgett | 2012-01-13 11:23:57 -0600 (Fri, 13 Jan 2012) | 8 lines
Use compatible names for event extra data for various CEL backends.
* Change eventextra to extra in cel_psql.c and cel_odbc.c.
* Change EventExtra to Extra in cel_manager.c.
(issue ASTERISK-17190)
........
Merged revisions 350555,350571 from http://svn.asterisk.org/svn/asterisk/branches/1.8
........
Merged revisions 350585 from http://svn.asterisk.org/svn/asterisk/branches/10
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@350605 65c4cc65-6c06-0410-ace0-fbb531ad65f3
This patch allows the imapserver, imapport, and imapflags settings to be
overridden for any voicemail user. It also documents the settings in
the sample voicemail.conf file, and updates the voicemail schema to
allow storage of those columns.
(closes issue ASTERISK-16489)
Reporter: Hubert Mickael
Tested by: Matt Jordan
Review: https://reviewboard.asterisk.org/r/1614/
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@349106 65c4cc65-6c06-0410-ace0-fbb531ad65f3
Adds two new options to SIP peers allowing them to specify features (dynamic or builtin)
to use when sending INFO/record requests. Recordonfeature activates whatever feature
is specified when recieving a record: on request while recordofffeature activates
whatever feature is specified when receiving a record: off request. Both of these
features can be disabled by setting the feature to an empty string.
(closes issue ASTERISK-16507)
Reported by: Jon Bright
Review: https://reviewboard.asterisk.org/r/1634/
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@349098 65c4cc65-6c06-0410-ace0-fbb531ad65f3
This patch moves destruction of sip peers to immediately after the general section of
sip.conf is read so that autocreatepeer setting can be read before deletion of peers.
If autocreatepeer=persist at reload, then peers created by the autocreatepeer setting
will be skipped when purging the current SIP peer list.
(closes ASTERISK-16508)
Reported by: Kirill Katsnelson
Patches:
017797-kkm-persist-autopeers-1.8.patch uploaded by Kirill Katsnelson (license 5845)
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@349097 65c4cc65-6c06-0410-ace0-fbb531ad65f3
In order to check the availability of the caller's name, app_voicemail will check for an
audio file in <astspooldir>/recordings/callerids/
This change sets a precedent for where to put recordings of names. Currently the idea is
that recordings here could also be used for applications like confbridge and meetme to
find recorded names in this folder from callerid (when another recording isn't available)
(closes issue ASTERISK-18565)
Reporter: Russell Brown
Patches:
r uploaded by Russel Brown (license 6182)
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@348416 65c4cc65-6c06-0410-ace0-fbb531ad65f3
Kevin Harwell
Jonathan Rose
Richard Mudgett
Michael L. Young
David M. Lee
Kinsey Moore
Matthew Jordan
Sean Bright
Rusty Newton
Russell Bryant
Walter Doekes
Mark Michelson
Joshua Colp
Jason Parker
Damien Wedhorn
Tilghman Lesher
Brent Eagles
Pedro Kiefer
Alec L Davis
Terry Wilson
Darren Sessions
Igor Goncharovskiy
Alexandr Anikin
Olle Johansson
Kevin P. Fleming