804 Commits (c5c5171ec8b0b81d4699a86b6aedf785e8045b32)

Author	SHA1	Message	Date
Naveen Albert	c5c5171ec8	app_read: Allow reading # as a digit ... Allows for the digit # to be read as a digit, just like any other DTMF digit, as opposed to forcing it to be used as an end of input indicator. The default behavior remains unchanged. ASTERISK-18454 #close Change-Id: I3033432adb9d296ad227e76b540b8b4a2417665b	4 years ago
Sebastien Duthil	166556961b	res_rtp_asterisk: Automatically refresh stunaddr from DNS ... This allows the STUN server to change its IP address without having to reload the res_rtp_asterisk module. The refresh of the name resolution occurs first when the module is loaded, then recurringly, slightly after the previous DNS answer TTL expires. ASTERISK-29508 #close Change-Id: I7955a046293f913ba121bbd82153b04439e3465f	4 years ago
Naveen Albert	220ce865db	app_queue: Don't reset queue stats on reload ... Prevents reloads of app_queue from also resetting queue statistics. Also preserves individual queue agent statistics if we're just reloading members. ASTERISK-28701 Change-Id: Ib5d4cdec175e44de38ef0f6ede4a7701751766f1	4 years ago
George Joseph	18c467686c	res_pjproject: Allow mapping to Asterisk TRACE level ... Allow mapping pjproject log messages to the Asterisk TRACE log level. The defaults were also changes to log pjproject levels 3,4 to DEBUG and 5,6 to TRACE. Previously 3,4,5,6 all went to DEBUG. ASTERISK-29582 Change-Id: I859a37a8dec263ed68099709cfbd3e665324c72d	5 years ago
Naveen Albert	9ee7b884f1	app_milliwatt: Timing fix ... The Milliwatt application uses incorrect tone timings that cause it to play the 1004 Hz tone constantly. This adds an option to enable the correct timing behavior, so that the Milliwatt application can be used for milliwatt test lines. The default behavior remains unchanged for compatability reasons, even though it is incorrect. ASTERISK-29575 #close Change-Id: I73ccc6c6fcaa31931c6fff3b85ad1805b2ce9d8c	5 years ago
Naveen Albert	7f4433f8c6	app_morsecode: Add American Morse code ... Previously, the Morsecode application only supported international Morse code. This adds support for American Morse code and adds an option to configure the frequency used in off intervals. Additionally, the application checks for hangup between tones to prevent application execution from continuing after hangup. ASTERISK-29541 Change-Id: I172431a2e18e6527d577e74adfb05b154cba7bd4	5 years ago
Naveen Albert	1055660252	func_scramble: Audio scrambler function ... Adds a function to scramble audio on a channel using whole spectrum frequency inversion. This can be used as a privacy enhancement with applications like ChanSpy or other potentially sensitive audio. ASTERISK-29542 Change-Id: I01020769d91060a1f56a708eb405f87648d1a67e	5 years ago
Naveen Albert	4606fb604a	app_originate: Add ability to set codecs ... A list of codecs to use for dialplan-originated calls can now be specified in Originate, similar to the ability in call files and the manager action. Additionally, we now default to just using the slin codec for originated calls, rather than all the slin* codecs up through slin192, which has been known to cause issues and inconsistencies from AMI and call file behavior. ASTERISK-29543 Change-Id: I96a1aeb83d54b635b7a51e1b4680f03791622883	5 years ago
Asterisk Development Team	4bf9b2d279	Update CHANGES and UPGRADE.txt for 16.20.0	5 years ago
Naveen Albert	af17973bda	func_frame_drop: New function ... Adds function to selectively drop specified frames in the TX or RX direction on a channel, including control frames. ASTERISK-29478 Change-Id: I8147c9d55d74e2e48861edba6b22f930920541ec	5 years ago
Naveen Albert	1298c02665	app_queue: Allow streaming multiple announcement files ... Allows multiple files comprising an agent announcement to be played by separating on the ampersand, similar to the multi-file support in other Asterisk applications. ASTERISK-29528 Change-Id: Iec600d8cd5ba14aa1e4e37f906accb356cd7891a	5 years ago
Igor Goncharovsky	8da1466478	res_pjsip_header_funcs: Add PJSIP_HEADERS() ability to read header by pattern ... PJSIP currently does not provide a function to replace SIP_HEADERS() function to get a list of headers from INVITE request. It may be used to get all X- headers in case the actual set and names of headers unknown. ASTERISK-29389 Change-Id: Ic09d395de71a0021e0d6c5c29e1e19d689079f8b	5 years ago
Rijnhard Hessel	b40e97b1d7	res_statsd: handle non-standard meter type safely ... Meter types are not well supported, lacking support in telegraf, datadog and the official statsd servers. We deprecate meters and provide a compliant fallback for any existing usages. A flag has been introduced to allow meters to fallback to counters. ASTERISK-29513 Change-Id: I5fcb385983a1b88f03696ff30a26b55c546a1dd7	5 years ago
Naveen Albert	0460e77e51	app_dtmfstore: New application to store digits ... Adds application to asynchronously collect digits dialed on a channel in the TX or RX direction using a framehook and stores them in a specified variable, up to a configurable number of digits. ASTERISK-29477 Change-Id: I51aa93fc9507f7636ac44806c4420ce690423e6f	5 years ago
Asterisk Development Team	b7f0d83698	Update CHANGES and UPGRADE.txt for 16.19.1	5 years ago
Naveen Albert	cb67bc2ebb	app_reload: New Reload application ... Adds an application to reload modules from within the dialplan. ASTERISK-29454 Change-Id: Ic8ab025d8b38dd525b872b41c465c999c5810774	5 years ago
Naveen Albert	7bc9a05059	app_waitforcond: New application ... While several applications exist to wait for a certain event to occur, none allow waiting for any generic expression to become true. This application allows for waiting for a condition to become true, with configurable timeout and checking interval. ASTERISK-29444 Change-Id: I08adf2824b8bc63405778cf355963b5005612f41	5 years ago
Andre Barbosa	884d863c08	res_stasis_playback: Send PlaybackFinish event only once for errors ... When we try to play a list of sound files in the same Play command, we get only one PlaybackFinish event, after all sounds are played. But in the case where the Play fails (because channel is destroyed for example), Asterisk will send one PlaybackFinish event for each sound file still to be played. If the list is big, Asterisk is sending many events. This patch adds a failed state so we can understand that the play failed. On that case we don't send the event, if we still have a list of sounds to be played. When we reach the last sound, we send the PlaybackFinish with the failed state. ASTERISK-29464 #close Change-Id: I4c2e5921cc597702513af0d7c6c2c982e1798322	5 years ago
Naveen Albert	bee710121e	app_dial: Expanded A option to add caller announcement ... Hitherto, the A option has made it possible to play audio upon answer to the called party only. This option is expanded to allow for playback of an audio file to the caller instead of or in addition to the audio played to the answerer. ASTERISK-29442 Change-Id: If6eed3ff5c341dc8c588c8210987f2571e891e5e	5 years ago
Asterisk Development Team	d41c4db68d	Update CHANGES and UPGRADE.txt for 16.19.0	5 years ago
Naveen Albert	b4e77b7f10	app_originate: Allow setting Caller ID and variables ... Caller ID can now be set on the called channel and Variables can now be set on the destination using the Originate application, just as they can be currently using call files or the Manager Action. ASTERISK-29450 Change-Id: Ia64cfe97d2792bcbf4775b3126cad662922a8b66	5 years ago
Naveen Albert	2c2dc7d97d	app_confbridge: New ConfKick() application ... Adds a new ConfKick() application, which may be used to kick a specific channel, all channels, or all non-admin channels from a specified conference bridge, similar to existing CLI and AMI commands. ASTERISK-29446 Change-Id: I5d96b683880bfdd27b2ab1c3f2e897c5046ded9b	5 years ago
Naveen Albert	17b9c5c5cf	res_pjsip_dtmf_info: Hook flash ... Adds hook flash recognition support for application/hook-flash. ASTERISK-29460 Change-Id: I1d060fa89a7cf41244c98f892fff44eb1c9738ea	5 years ago
Naveen Albert	95f588496d	app_confbridge: New option to prevent answer supervision ... A new user option, answer_channel, adds the capability to prevent answering the channel if it hasn't already been answered yet. ASTERISK-29440 Change-Id: I26642729d0345f178c7b8045506605c8402de54b	5 years ago
George Joseph	6cd89c4f0a	res_pjsip_messaging: Refactor outgoing URI processing ... * Implemented the new "to" parameter of the MessageSend() dialplan application. This allows a user to specify a complete SIP "To" header separate from the Request URI. * Completely refactored the get_outbound_endpoint() function to actually handle all the destination combinations that we advertized as supporting. * We now also accept a destination in the same format as Dial()... PJSIP/number@endpoint * Added lots of debugging. ASTERISK-29404 Reported by Brian J. Murrell Change-Id: I67a485196d9199916468f7f98bfb9a0b993a4cce	5 years ago
Naveen Albert	8236f2f155	func_math: Three new dialplan functions ... Introduces three new dialplan functions, MIN and MAX, which can be used to calculate the minimum or maximum of up to two numbers, and ABS, an absolute value function. ASTERISK-29431 Change-Id: I2bda9269d18f9d54833c85e48e41fce0e0ce4d8d	5 years ago
Naveen Albert	d1305af137	func_volume: Add read capability to function. ... Up until now, the VOLUME function has been write only, so that TX/RX values can be set but not read afterwards. Now, previously set TX/RX values can be read later. ASTERISK-29439 Change-Id: Ia23e92fa2e755c36e9c8e69f2940d2703ccccb5f	5 years ago
Joseph Nadiv	a123e8cb0e	res_pjsip.c: Support endpoints with domain info in username ... In multidomain environments, it is desirable to create PJSIP endpoints with the domain info in the endpoint name in pjsip_endpoint.conf. This resulted in an error with registrations, NOTIFY, and OPTIONS packet generation. This commit will detect if there is an @ in the endpoint identifier and generate the URI accordingly so NOTIFY and OPTIONS From headers will generate correctly. ASTERISK-28393 Change-Id: I96f8d01dfdd5573ba7a28299e46271dd4210b619	5 years ago
Jeremy Lainé	0cd5d5150a	res_rtp_asterisk: make it possible to remove SOFTWARE attribute ... By default Asterisk reports the PJSIP version in a SOFTWARE attribute of every STUN packet it sends. This may not be desired in a production environment, and RFC5389 recommends making the use of the SOFTWARE attribute a configurable option: https://datatracker.ietf.org/doc/html/rfc5389#section-16.1.2 This patch adds a `stun_software_attribute` yes/no option to make it possible to omit the SOFTWARE attribute from STUN packets. ASTERISK-29434 Change-Id: Id3f2b1dd9584536ebb3a1d7e8395fd8b3e46860b	5 years ago
Joseph Nadiv	48851279a8	res_pjsip_dialog_info_body_generator: Add LOCAL/REMOTE tags in dialog-info+xml ... RFC 4235 Section 4.1.6 describes XML elements that should be sent to subscribed endpoints to identify the local and remote participants in the dialog. This patch adds this functionality to PJSIP by iterating through the ringing channels causing the NOTIFY, and inserts the channel info into the dialog so that information is properly passed to the endpoint in dialog-info+xml. ASTERISK-24601 Patch submitted: Joshua Elson Modified by: Joseph Nadiv and Sean Bright Tested by: Joseph Nadiv Change-Id: I20c5cf5b45f34d7179df6573c5abf863eb72964b	5 years ago
Naveen Albert	10aa4f9876	app_voicemail: Configurable voicemail beep ... Hitherto, VoiceMail() played a non-customizable beep tone to indicate the caller could leave a message. In some cases, the beep may not be desired, or a different tone may be desired. To increase flexibility, a new option allows customization of the tone. If the t option is specified, the default beep will be overridden. Supplying an argument will cause it to use the specified file for the tone, and omitting it will cause it to skip the beep altogether. If the option is not used, the default behavior persists. ASTERISK-29349 Change-Id: I1c439c0011497e28a28067fc1cf1e654c8843280	5 years ago
Naveen Albert	ea117be4c6	AMI: Add AMI event to expose hook flash events ... Although Asterisk can receive and propogate flash events, it currently provides no mechanism for doing anything with them itself. This AMI event allows flash events to be processed by Asterisk. Additionally, AST_CONTROL_FLASH is included in a switch statement in channel.c to avoid throwing a warning when we shouldn't. ASTERISK-29380 Change-Id: Ie17ffe65086e0282c88542e38eed6a461ec79e81	5 years ago
Ben Ford	0b4b207076	STIR/SHAKEN: Switch to base64 URL encoding. ... STIR/SHAKEN encodes using base64 URL format. Currently, we just use base64. New functions have been added that convert to and from base64 encoding. The origid field should also be an UUID. This means there's no reason to have it as an option in stir_shaken.conf, as we can simply generate one when creating the Identity header. https://wiki.asterisk.org/wiki/display/AST/OpenSIPit+2021 Change-Id: Icf094a2a54e87db91d6b12244c9f5ba4fc2e0b8c	5 years ago
Ben Ford	184a027eaa	STIR/SHAKEN: Fix certificate type and storage. ... During OpenSIPit, we found out that the public certificates must be of type X.509. When reading in public keys, we use the corresponding X.509 functions now. We also discovered that we needed a better naming scheme for the certificates since certificates with the same name would cause issues (overwriting certs, etc.). Now when we download a public certificate, we get the serial number from it and use that as the name of the cached certificate. The configuration option public_key_url in stir_shaken.conf has also been renamed to public_cert_url, which better describes what the option is for. https://wiki.asterisk.org/wiki/display/AST/OpenSIPit+2021 Change-Id: Ia00b20835f5f976e3603797f2f2fb19672d8114d	5 years ago
George Joseph	63c25d3821	Updates for the MessageSend Dialplan App ... Enhancements: * The MessageSend dialplan application now takes an optional third argument that can set the message's "To" field on outgoing messages. It's an alternative to using the MESSAGE(to) dialplan function. NOTE: No channel driver currently implements this field. A follow-on commit for res_pjsip_messaging will implement it for the chan_pjsip channel driver. * To prevent confusion with the first argument, currently named "to", it's been renamed to "destination". Its function, creating the request URI, hasn't changed. * The documentation for MessageSend was updated to be more clear about the parameters and how they interact the MESSAGE() dialplan function. * With the rename of MessageSend's first parameter, and the fact that message.c references <info> elements in chan_sip.c, res_pjsip_messaging.c and res_xmpp, they each needed documentation updates to use MessageDestinationInfo instead of MessageToInfo. * appdocsxml.dtd was updated to include a missing element declaration for "dataType". This was showing up as an error in Eclipse's dtd editor. * Despite the changes in this commit, there should be no impact to current users of MessageSend. Change-Id: I6fb5b569657a02866a66ea352fd53d30d8ac965a	5 years ago
Asterisk Development Team	0fd9c6588b	Update CHANGES and UPGRADE.txt for 16.18.0	5 years ago
Sean Bright	5a2939a5d6	res_pjsip.c: OPTIONS processing can now optionally skip authentication ... ASTERISK-27477 #close Change-Id: I68f6715bba92a525149e35d142a49377a34a1193	5 years ago
Mark Murawski	98d149b4ce	logger: Console sessions will now respect logger.conf dateformat= option ... The 'core' console (ie: asterisk -c) does read logger.conf and does use the dateformat= option. Whereas 'remote' consoles (ie: asterisk -r -T) does not read logger.conf and uses a hard coded dateformat option for printing received verbose messages: main/logger.c: static char dateformat[256] = "%b %e %T" This change will load logger.conf for each remote console session and use the dateformat= option to set the per-line timestamp for verbose messages Change-Id: I3ea10990dbd920e9f7ce8ff771bc65aa7f4ea8c1 ASTERISK-25358: #close Reported-by: Igor Liferenko	5 years ago
Joshua C. Colp	720a39eb9e	res_pjsip: Add support for partial transport reload. ... Some configuration items for a transport do not result in the underlying transport changing, but instead are just state we keep ourselves and use. It is perfectly reasonable to change these items. These include local_net and external_* information. ASTERISK-29354 Change-Id: I027857ccfe4419f460243e562b5f098434b3d43a	5 years ago
Jaco Kroon	eff26ffe42	menuselect: exit non-zero in case of failure on --enable|disable options. ... ASTERISK-29348 Change-Id: I77e3466435f5a51a57538b29addb68d811af238d Signed-off-by: Jaco Kroon <jaco@uls.co.za>	5 years ago
Joshua C. Colp	ea3d4e0343	xml: Allow deprecated_in and removed_in for MODULEINFO. ... ASTERISK-29337 Change-Id: I2211b7da8d29369f8649aeabce07679da0787f2b	5 years ago
Joshua C. Colp	e42417e910	xml: Embed module information into core XML documentation. ... This change embeds the MODULEINFO block of modules into the core XML documentation. This provides a shared mechanism for use by both menuselect and Asterisk for information and a definitive source of truth. ASTERISK-29335 Change-Id: Ifbfd5c700049cf320a3e45351ac65dd89bc99d90	5 years ago
Asterisk Development Team	fb17a41641	Update CHANGES and UPGRADE.txt for 16.17.0	5 years ago
Jaco Kroon	d847f7e8f8	func_odbc: Introduce minargs config and expose ARGC in addition to ARGn. ... minargs enables enforcing of minimum count of arguments to pass to func_odbc, so if you're unconditionally using ARG1 through ARG4 then this should be set to 4. func_odbc will generate an error in this case, so for example [FOO] minargs = 4 and ODBC_FOO(a,b,c) in dialplan will now error out instead of using a potentially leaked ARG4 from Gosub(). ARGC is needed if you're using optional argument, to verify whether or not an argument has been passed, else it's possible to use a leaked ARGn from Gosub (app_stack). So now you can safely do ${IF($[${ARGC}>3]?${ARGV}:default value)} kind of thing. Change-Id: I6ca0b137d90b03f6aa9c496991f6cbf1518f6c24 Signed-off-by: Jaco Kroon <jaco@uls.co.za>	5 years ago
Sebastien Duthil	435d68be97	app_mixmonitor: Add AMI events MixMonitorStart, -Stop and -Mute. ... ASTERISK-29244 Change-Id: I1862d58264c2c8b5d8983272cb29734b184d67c5	5 years ago
Alexander Traud	c98de279b2	rtp: Enable srtp replay protection ... Add option "srtpreplayprotection" rtp.conf to enable srtp replay protection. ASTERISK-29260 Reported by: Alexander Traud Change-Id: I5cd346e3c6b6812039d1901aa4b7be688173b458	5 years ago
George Joseph	10c2e1749b	chan_iax2.c: Require secret and auth method if encryption is enabled ... If there's no secret specified for an iax2 peer and there's no secret specified in the dial string, Asterisk will crash if the auth method requested by the peer is MD5 or plaintext. You also couldn't specify a default auth method in the [general] section of iax.conf so if you don't have static peers defined and just use the dial string, Asterisk will still crash even if you have a secret specified in the dial string. * Added logic to iax2_call() and authenticate_reply() to print a warning and hanhup the call if encryption is requested and there's no secret or auth method. This prevents the crash. * Added the ability to specify a default "auth" in the [general] section of iax.conf. ASTERISK-29624 Reported by: N A Change-Id: I5928e16137581f7d383fcc7fa04ad96c919e6254	5 years ago
Dan Cropp	a5364ac69b	chan_pjsip, app_transfer: Add TRANSFERSTATUSPROTOCOL variable ... When a Transfer/REFER is executed, TRANSFERSTATUSPROTOCOL variable is 0 when no protocl specific error SIP example of failure, 3xx-6xx for the SIP error code received This allows applications to perform actions based on the failure reason. ASTERISK-29252 #close Reported-by: Dan Cropp Change-Id: Ia6a94784b4925628af122409cdd733c9f29abfc4	5 years ago
Asterisk Development Team	6056818467	Update CHANGES and UPGRADE.txt for 16.16.0	5 years ago
lvl	8d2558209b	Introduce astcachedir, to be used for temporary bucket files ... As described in the issue, /tmp is not a suitable location for a large amount of cached media files, since most distributions make /tmp a RAM-based tmpfs mount with limited capacity. I opted for a location that can be configured separately, as opposed to using a subdirectory of spooldir, given the different storage profile (transient files vs files that might stay there indefinitely). This commit just makes the cache directory configurable, but leaves it at /tmp by default, to ensure backwards compatibility. A future commit that only targets master could change the default location to something more sensible such as /var/tmp/asterisk. At that point, the cachedir could be created and cleaned up during uninstall by the Makefile script. ASTERISK-29143 Change-Id: Ic54e95199405abacd9e509cef5f08fa14c510b5d	5 years ago