Currently when Asterisk starts initial qualifies of contacts are spread out
randomly between 0 and qualify_timeout to prevent network and system overload.
If a contact's qualify_frequency is 5 minutes however, that contact may be
unavailable to accept calls for the entire 5 minutes after startup. So while
staggering the initial qualifies is a good idea, basing the time on
qualify_timeout could leave contacts unavailable for too long.
This patch adds a new global parameter "max_initial_qualify_time" that sets the
maximum time for the initial qualifies. This way you could make sure that all
your contacts are initialy, randomly qualified within say 30 seconds but still
have the contact's ongoing qualifies at a 5 minute interval.
If max_initial_qualify_time is > 0, the formula is initial_interval =
min(max_initial_interval, qualify_timeout * random(). If not set,
qualify_timeout is used.
The default is "0" (disabled).
ASTERISK-24863 #close
Change-Id: Ib80498aa1ea9923277bef51d6a9015c9c79740f4
Tested-by: George Joseph <george.joseph@fairview5.com>
This patch adds support for automatically detecting the type of DTMF that a
PJSIP endpoint supports. When the 'dtmf_mode' endpoint option is set to 'auto',
the channel created for an endpoint will attempt to determine if RFC 4733
DTMF is supported. If so, it will use that DTMF type. If not, the DTMF type
for the channel will be set to inband.
Review: https://reviewboard.asterisk.org/r/4438
ASTERISK-24706 #close
Reported by: yaron nahum
patches:
yaron_patch_3_Feb.diff submitted by yaron nahum (License 6676)
git-svn-id: https://origsvn.digium.com/svn/asterisk/branches/13@434637 65c4cc65-6c06-0410-ace0-fbb531ad65f3
Incoming PJSIP call legs that have not been answered yet send unnecessary
"180 Ringing" or "183 Progress" messages every time a connected line
update happens. If the outgoing channel is also PJSIP then the incoming
channel will always send a "180 Ringing" or "183 Progress" message when
the outgoing channel sends the INVITE.
Consequences of these unnecessary messages:
* The caller can start hearing ringback before the far end even gets the
call.
* Many phones tend to grab the first connected line information and refuse
to update the display if it changes. The first information is not likely
to be correct if the call goes to an endpoint not under the control of the
first Asterisk box.
When connected line first went into Asterisk in v1.8, chan_sip received an
undocumented option "rpid_immediate" that defaults to disabled. When
enabled, the option immediately passes connected line update information
to the caller in "180 Ringing" or "183 Progress" messages as described
above.
* Added "rpid_immediate" option to prevent unnecessary "180 Ringing" or
"183 Progress" messages. The default is "no" to disable sending the
unnecessary messages.
ASTERISK-24781 #close
Reported by: Richard Mudgett
Review: https://reviewboard.asterisk.org/r/4473/
git-svn-id: https://origsvn.digium.com/svn/asterisk/branches/13@433338 65c4cc65-6c06-0410-ace0-fbb531ad65f3
This patch fixes previously reverted code that caused binary incompatibility
problems with some modules. And like the original patch it makes sure that
no matter what order the endpoint identifier modules were loaded, priority is
given based on the ones specified in the new global 'endpoint_identifier_order'
option.
ASTERISK-24840
Reported by: Mark Michelson
Review: https://reviewboard.asterisk.org/r/4489/
git-svn-id: https://origsvn.digium.com/svn/asterisk/branches/13@433028 65c4cc65-6c06-0410-ace0-fbb531ad65f3
Due to a break in binary compatibility with some other modules these changes
are being reverted until the issue can be resolved.
ASTERISK-24840
Reported by: Mark Michelson
git-svn-id: https://origsvn.digium.com/svn/asterisk/branches/13@432868 65c4cc65-6c06-0410-ace0-fbb531ad65f3
It's possible to have a scenario that will create a conflict between endpoint
identifiers. For instance an incoming call could be identified by two different
endpoint identifiers and the one chosen depended upon which identifier module
loaded first. This of course causes problems when, for example, the incoming
call is expected to be identified by username, but instead is identified by ip.
This patch adds a new 'global' option to res_pjsip called
'endpoint_identifier_order'. It is a comma separated list of endpoint
identifier names that specifies the order by which identifiers are processed
and checked.
ASTERISK-24840 #close
Reported by: Mark Michelson
Review: https://reviewboard.asterisk.org/r/4455/
git-svn-id: https://origsvn.digium.com/svn/asterisk/branches/13@432638 65c4cc65-6c06-0410-ace0-fbb531ad65f3
This change does two things:
1. Disables debugging so assertions which can return an error do,
instead of asserting.
2. Enables IPv6 support.
ASTERISK-24632 #close
Reported by: Rusty Newton
git-svn-id: https://origsvn.digium.com/svn/asterisk/branches/13@431843 65c4cc65-6c06-0410-ace0-fbb531ad65f3
On Debian based systems, the install_prereq tool uses a search command on
Debian that results in selecting both 64-bit and 32-bit packages. Besides the
waste of disk space, this can actually cause aptitude use 100% of memory on a
VM with 1GB of RAM as it tried to work out all of the 32-bit package
dependencies.
This patch filters out the 32-bit packages on a 64-bit machine, and leaves
32-bit machines alone.
ASTERISK-24048 #close
Reported by: Ben Klang
Tested by: Ben Klang, Matt Jordan
patches:
install_prereq_64-bit_compat.patch uploaded by Ben Klang (License 5876)
........
Merged revisions 430798 from http://svn.asterisk.org/svn/asterisk/branches/11
git-svn-id: https://origsvn.digium.com/svn/asterisk/branches/13@430799 65c4cc65-6c06-0410-ace0-fbb531ad65f3
General improvements to SIP to PJSIP conversion utility:
1) track default section of input file to allow parsing
an include file that doesn't specify a [section]
2) informatively handle case of assignment without [section]
3) correctly handle getting sections from included files
- [section]'s are inherited by included file
4) provide null string as default transport bind ip
5) gracefully handle missing portions of registration string
6) denote steps of operation during conversion and confirm
top level files as a convenience
ASTERISK-24474 #close
Review: https://reviewboard.asterisk.org/r/4280/
Reported by: John Kiniston
git-svn-id: https://origsvn.digium.com/svn/asterisk/branches/13@430469 65c4cc65-6c06-0410-ace0-fbb531ad65f3
When the user_eq_phone patch was backported to 13, it referenced the downward
revision that the PJSIP optimistic encryption option also references. This
creates a multi-path upgrade Exception when generating the SQL files.
This patch corrects this in the 13 branch. Note that trunk, which already
contained both of these features, is unaffected by this problem.
git-svn-id: https://origsvn.digium.com/svn/asterisk/branches/13@430252 65c4cc65-6c06-0410-ace0-fbb531ad65f3
This backports the following from trunk, which were missed:
r427257 | file | 2014-11-04 16:31:16 -0600 (Tue, 04 Nov 2014) | 2 lines
res_pjsip: Allow + at the beginning of a phone number when user_eq_phone is enabled.
r427259 | file | 2014-11-04 16:51:32 -0600 (Tue, 04 Nov 2014) | 2 lines
res_pjsip: Apply the 'user_eq_phone' setting to the To header as well.
It also adds the Alembic script for the option.
ASTERISK-24643
git-svn-id: https://origsvn.digium.com/svn/asterisk/branches/13@430092 65c4cc65-6c06-0410-ace0-fbb531ad65f3
Optimistic SRTP is the ability to enable SRTP but not have it be
a fatal requirement. If SRTP can be used it will be, if not it won't be.
This gives you a better chance of using it without having your sessions
fail when it can't be.
Encrypt all the things!
Review: https://reviewboard.asterisk.org/r/3992/
git-svn-id: https://origsvn.digium.com/svn/asterisk/branches/13@428222 65c4cc65-6c06-0410-ace0-fbb531ad65f3
* Make astob2 REF_DEBUG output an invalid object line when an invalid ao2
object ref/unref is attempted. This is similar to the
constructor/destructor lines.
* Fixed refcounter.py to handle skewed objects that have
constructor/destructor states.
* Made refcounter.py highlight the invalid ao2 object refs by putting them
in their own section of the processed output file.
* Made refcounter.py highlight unreffing an object by more than one that
results in a negative ref count and the object being destroyed. The
abnormally destroyed object is reported in the invalid and finalized
object sections of the output.
Review: https://reviewboard.asterisk.org/r/3971/
........
Merged revisions 423349 from http://svn.asterisk.org/svn/asterisk/branches/1.8
........
Merged revisions 423400 from http://svn.asterisk.org/svn/asterisk/branches/11
........
Merged revisions 423416 from http://svn.asterisk.org/svn/asterisk/branches/12
git-svn-id: https://origsvn.digium.com/svn/asterisk/branches/13@423418 65c4cc65-6c06-0410-ace0-fbb531ad65f3
This patch gives the optional ability to keep queue rules in RealTime. It is
important to note that with this patch:
(a) Queue rules in RealTime are only examined on module load/reload
(b) Queue rules are loaded both from the queuerules.conf file as well as the
RealTime backend
To inform app_queue to examine RealTime for queue rules, a new setting has been
added to queuerules.conf's general section "realtime_rules". RealTime queue
rules will only be used when this setting is set to "yes".
The schema for the database table supports a rule_name, time, min_penalty, and
max_penalty columns. min_penalty and max_penalty can be relative, if a '-' or
'+' literal is provided. Otherwise, the penalties are treated as constants.
For example:
rule_name, time, min_penalty, max_penalty
'default', '10', '20', '30'
'test2', '20', '30', '55'
'test2', '25', '-11', '+1111'
'test2', '400', '112', '333'
'test3', '0', '4564', '46546'
'test_rule', '40', '15', '50'
which would result in :
Rule: default
- After 10 seconds, adjust QUEUE_MAX_PENALTY to 30 and adjust
QUEUE_MIN_PENALTY to 20
Rule: test2
- After 20 seconds, adjust QUEUE_MAX_PENALTY to 55 and adjust
QUEUE_MIN_PENALTY to 30
- After 25 seconds, adjust QUEUE_MAX_PENALTY by 1111 and adjust
QUEUE_MIN_PENALTY by -11
- After 400 seconds, adjust QUEUE_MAX_PENALTY to 333 and adjust
QUEUE_MIN_PENALTY to 112
Rule: test3
- After 0 seconds, adjust QUEUE_MAX_PENALTY to 46546 and adjust
QUEUE_MIN_PENALTY to 4564
Rule: test_rule
- After 40 seconds, adjust QUEUE_MAX_PENALTY to 50 and adjust
QUEUE_MIN_PENALTY to 15
If you use RealTime, the queue rules will be always reloaded on a module
reload, even if the underlying file did not change. With the option disabled,
the rules will only be reloaded if the file was modified.
Review: https://reviewboard.asterisk.org/r/3607/
ASTERISK-23823 #close
Reported by: Michael K
patches:
app_queue.c_realtime_trunk.patch uploaded by Michael K (License 6621)
git-svn-id: https://origsvn.digium.com/svn/asterisk/branches/13@420624 65c4cc65-6c06-0410-ace0-fbb531ad65f3
When run in offline mode, this would attempt to check the database for
the presence of a type it was going to try to create. I now check the
context to see if we're running in offline mode and change a parameter
accordingly.
........
Merged revisions 407567 from http://svn.asterisk.org/svn/asterisk/branches/12
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@420237 65c4cc65-6c06-0410-ace0-fbb531ad65f3
* Increased the sippeers useragent max string size to 255.
* Changed the queue_members uniqueid to an auto incremented integer
instead of a string.
* Increased the voicemail_messages BLOB size to LONGBLOB on mysql.
* Fixed the add_tables_for_pjsip config change version downgrade actions
to drop a table it created.
* Adjusted the sample alembic.ini files cdr.ini.sample, config.ini.sample,
and voicemail.ini.sample to give a mysql and postgres sqlalchemy.url
lines.
ASTERISK-23847 #close
Reported by: Stephen More
ASTERISK-23825 #close
Reported by: Stephen More
ASTERISK-23909 #close
Reported by: Stephen More
Review: https://reviewboard.asterisk.org/r/3870/
........
Merged revisions 420211 from http://svn.asterisk.org/svn/asterisk/branches/12
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@420212 65c4cc65-6c06-0410-ace0-fbb531ad65f3
Most channel drivers let you specify a default accountcode to be set on
channels associated with a particular peer/endpoint/object. Prior to this
patch, chan_pjsip/res_pjsip did not support such a setting.
This patch adds a new setting to the res_pjsip endpoint object, 'accountcode'.
When a channel is created that is associated with an endpoint with this value
set, the channel will automatically have its accountcode property set to the
value configured for the endpoint.
Review: https://reviewboard.asterisk.org/r/3724/
ASTERISK-24000 #close
Reported by: Matt Jordan
........
Merged revisions 418756 from http://svn.asterisk.org/svn/asterisk/branches/12
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@418757 65c4cc65-6c06-0410-ace0-fbb531ad65f3
........
res_rtp_asterisk: Add SHA-256 support for DTLS and perform DTLS negotiation on RTCP.
This change fixes up DTLS support in res_rtp_asterisk so it can accept and provide
a SHA-256 fingerprint, so it occurs on RTCP, and so it occurs after ICE negotiation
completes. Configuration options to chan_sip and chan_pjsip have also been added to
allow behavior to be tweaked (such as forcing the AVP type media transports in SDP).
ASTERISK-22961 #close
Reported by: Jay Jideliov
Review: https://reviewboard.asterisk.org/r/3679/
Review: https://reviewboard.asterisk.org/r/3686/
........
Merged revisions 417678 from http://svn.asterisk.org/svn/asterisk/branches/12
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@417679 65c4cc65-6c06-0410-ace0-fbb531ad65f3
This change makes res_pjsip_pubsub persist inbound subscriptions in sorcery. By default
this uses the local astdb but it can also be configured to store within an outside
database. When Asterisk is started these subscriptions are recreated if they have not
expired. Notifications are sent to the devices which have subscribed and they are none
the wiser that the system has restarted.
Review: https://reviewboard.asterisk.org/r/3598/
........
Merged revisions 415766 from http://svn.asterisk.org/svn/asterisk/branches/12
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@415767 65c4cc65-6c06-0410-ace0-fbb531ad65f3
From now on, make install will overwrite safe_asterisk with the
latest version. You need to move any local modifications to files
inside /etc/asterisk/startup.d, if you have any.
See also commits r394939 and r397938.
ASTERISK-21965 #close
Patches:
safe_asterisk.patch uploaded by jkister (License 6232, modified by me)
........
Merged revisions 415748 from http://svn.asterisk.org/svn/asterisk/branches/12
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@415749 65c4cc65-6c06-0410-ace0-fbb531ad65f3
Cleans up the safe_asterisk script and adds the ASTSAFE_FOREGROUND
option that allows the debian asterisk init script to capture the
right pid.
* Drop the vim #modeline which wasn't used. Use test consistently
without the odd configure xno syntax. Double quote all paths.
General cleanup.
* Don't output message()s to the console but only to TTY if set.
* Allow TTY to be "no" as well as empty (debian compatibility with
debian/patches/safe_asterisk-config).
* Add option to export ASTSAFE_FOREGROUND=1 from the init script
that calls this to disable backgrounding. Debian uses a similar
method in debian/patches/safe_asterisk-nobg).
ASTERISK-23492 #close
Review: https://reviewboard.asterisk.org/r/3574/
........
Merged revisions 415132 from http://svn.asterisk.org/svn/asterisk/branches/1.8
........
Merged revisions 415171 from http://svn.asterisk.org/svn/asterisk/branches/11
........
Merged revisions 415172 from http://svn.asterisk.org/svn/asterisk/branches/12
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@415173 65c4cc65-6c06-0410-ace0-fbb531ad65f3
When generating SQL files via the repotools alembic_creator.py script, a
configuration object is used programatically with SQLAlechemy, as opposed to
a configuration file. This patch ignores failures to interpret a config file,
as ... there isn't one in this case.
........
Merged revisions 414763 from http://svn.asterisk.org/svn/asterisk/branches/12
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@414764 65c4cc65-6c06-0410-ace0-fbb531ad65f3
The string lengths on certain columns created through alembic for PJSIP were
too short. For instance, columns containing URIs are currently set to 40
characters, but this can be too small and result in truncated values. Added
an alembic migration script that increases the size of these columns and a
few others to 255.
ASTERISK-23639 #close
Reported by: Mark Michelson
Review: https://reviewboard.asterisk.org/r/3475/
........
Merged revisions 412992 from http://svn.asterisk.org/svn/asterisk/branches/12
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@412993 65c4cc65-6c06-0410-ace0-fbb531ad65f3
This patch does the following:
(1) It makes REF_DEBUG a meneselect item. Enabling REF_DEBUG now enables
REF_DEBUG globally throughout Asterisk.
(2) The ref debug log file is now created in the AST_LOG_DIR directory.
Every run will now blow away the previous run (as large ref files
sometimes caused issues). We now also no longer open/close the file
on each write, instead relying on fflush to make sure data gets written
to the file (in case the ao2 call being performed is about to cause a
crash)
(3) It goes with a comma delineated format for the ref debug file. This
makes parsing much easier. This also now includes the thread ID of the
thread that caused ref change.
(4) A new python script instead for refcounting has been added in the
contrib/scripts folder.
(5) The old refcounter implementation in utils/ has been removed.
Review: https://reviewboard.asterisk.org/r/3377/
........
Merged revisions 412114 from http://svn.asterisk.org/svn/asterisk/branches/1.8
........
Merged revisions 412115 from http://svn.asterisk.org/svn/asterisk/branches/11
........
Merged revisions 412153 from http://svn.asterisk.org/svn/asterisk/branches/12
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@412154 65c4cc65-6c06-0410-ace0-fbb531ad65f3
Since the relatime scripts are now managed by Alembic, the previous realtime
scripts were previously removed. However, the removal process messed up, as
the files were still in the repository. The contents were just empty.
This removes the files from the tree.
........
Merged revisions 411442 from http://svn.asterisk.org/svn/asterisk/branches/12
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@411443 65c4cc65-6c06-0410-ace0-fbb531ad65f3
Transport TOS values were interpreted as DSCP values without being documented
as such. Endpoint TOS values (tos_audio/tos_video) behaved normally as TOS
values have historically. This patch makes the transport TOS values behave as
TOS values and makes all TOS values readable as string values (e.g. AF11).
In addition, alembic scripts have been updated to use the proper field types
for all TOS/COS values.
(issue ASTERISK-23235)
Reported by: George Joseph
Review: https://reviewboard.asterisk.org/r/3304/
........
Merged revisions 410028 from http://svn.asterisk.org/svn/asterisk/branches/12
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@410029 65c4cc65-6c06-0410-ace0-fbb531ad65f3
If an enum had been previously created the alembic script would attempt to
re-create it and an error would be generated while running migrations for a
postgresql server. The work around for this is to use the ENUM object type
for postgres as opposed to the generic enum type used by sqlalchemy. Using
this type in the script seems to work properly for both postgres and mysql.
........
Merged revisions 407572 from http://svn.asterisk.org/svn/asterisk/branches/12
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@407574 65c4cc65-6c06-0410-ace0-fbb531ad65f3
A couple of the scripts had errors that would not allow a full migration to
take place. The extensions table needed to make its 'id' column a primary
key in order to work with mysql. The other script ...add_endpoints... was
missing tables that it was trying to add columns to.
Added the primary key on id for extensions and added the tables in for the
missing pjsip configuration options. While it is not ideal to modify already
released scripts this was a case where it had to be done due to errors in
the script and lacking a better alternative.
Review: https://reviewboard.asterisk.org/r/3167/
........
Merged revisions 407019 from http://svn.asterisk.org/svn/asterisk/branches/12
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@407029 65c4cc65-6c06-0410-ace0-fbb531ad65f3
This adds Path support to chan_pjsip in res_pjsip_path.c with minimal
additions in res_pjsip_registrar.c to store the path and additions in
res_pjsip_outbound_registration.c to enable advertisement of path
support to registrars and intervening proxies.
Path information is stored on contacts and is enabled via Address of
Record (AoRs) and Registration configuration sections.
While adding path support, it became necessary to be able to add SIP
supplements that handled messages outside of sessions, so a framework
for handling these types of hooks was added in parallel to the
already-existing session supplements and several senders of
out-of-dialog requests were refactored as a result.
(closes issue ASTERISK-21084)
Review: https://reviewboard.asterisk.org/r/3050/
........
Merged revisions 405565 from http://svn.asterisk.org/svn/asterisk/branches/12
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@405566 65c4cc65-6c06-0410-ace0-fbb531ad65f3
This patch does the following:
1) The env scripts have been updated to be tolerant of a NULL configuration
file. This occurs when configuration is provided by an external script,
such that the actual config.ini file is not used.
2) Enum types have all been given names. This is needed for PostgreSQL script
generation.
3) The identifier meetme_confno_starttime_endtime is greater than 30
characters, and hence invalid for Oracle databases. This has been truncated
down to meetme_confno_start_end.
........
Merged revisions 400383 from http://svn.asterisk.org/svn/asterisk/branches/12
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@402073 65c4cc65-6c06-0410-ace0-fbb531ad65f3
The patch from ASTERISK-21965 was committed perhaps a bit too hastily. Walter
and Tzafrir have pointed out numerous issues with the approach and have
propsed an alternative in r/2757. Since it's not a time critical issue and
is not worth holding up the release of 12 for it, I've gone ahead and reverted
r394939 from 12/trunk and re-opened ASTERISK-21965.
........
Merged revisions 397938 from http://svn.asterisk.org/svn/asterisk/branches/12
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@397939 65c4cc65-6c06-0410-ace0-fbb531ad65f3
This patch replaces contrib/realtime/ with a new setup for managing the
database schema required for database integration with Asterisk. In
addition to initializing a database with the proper schema, alembic can do a
database migration to assist with upgrading Asterisk in the future.
Hopefully this helps make setting up and operating Asterisk with a database
easier.
With this the schema only needs to be maintained in one place instead of
once per database. The schemas I have added here have a bit of improvement
over the examples that were there before (some added consistency and added
some missing indexes). Managing the schema in one place here also applies
to all databases supported by SQLAlchemy.
See contrib/ast-db-manage/README.md for more details.
Review: https://reviewboard.asterisk.org/r/2731
patch by Russell Bryant (license 6300)
........
Merged revisions 397874 from http://svn.asterisk.org/svn/asterisk/branches/12
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@397875 65c4cc65-6c06-0410-ace0-fbb531ad65f3
Most, if not all, of the backing features of a conf file should now be
implemented (e.g. multi-line comments, includes, templates, etc...). A
few of the options still need to be mapped. Those are currently listed
in the 'sip_to_res_sip.py' file.
Things to do:
(1) There is more work to do here, at least for the sip.conf items that
aren't currently parsed. An issue will be created for that.
(2) All of the scripts should probably be passed through pylint and have
as many PEP8 issues fixed as possible.
(3) A public review is probably warranted at that point of the entire script.
Reported by: Matt Jordan
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@397567 65c4cc65-6c06-0410-ace0-fbb531ad65f3
This prevents XML documentation duplication by expanding channel and
bridge snapshot tags into channel and bridge snapshot parameter sets
with a given prefix or defaulting to no prefix. This also prevents
documentation from becoming fractured and out of date by keeping all
variations of the documentation in template form such that it only
needs to be updated once and keeps maintenance to a minimum.
Review: https://reviewboard.asterisk.org/r/2708/
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@395985 65c4cc65-6c06-0410-ace0-fbb531ad65f3
This patch modifies the behavior of safe_asterisk in two ways:
(1) It modifies the Asterisk Makefile such that safe_asterisk is always
installed on a 'make install'. This was done as bugfixes in the
safe_asterisk script were not applied in previous version of Asterisk
without first removing the old version of the script.
(2) In order to keep a newly installed version of safe_asterisk from impacting
local modifications, a new config file - safe_asterisk.conf.sample - has
been provided. Settings that were previously modified in safe_asterisk can
be set there instead.
(closes issue ASTERISK-21965)
Reported by: Jeremy Kister
patches:
safe_asterisk.patch uploaded by jkister (License 6232)
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@394939 65c4cc65-6c06-0410-ace0-fbb531ad65f3
** This script is in no way finished.
Started the initial "cut" at converting a sip.conf file to a res_sip.conf file.
Hopefully the bulk of the framework is in place and only a few minor adjustments
need to be made when an option mapping is added that "doesn't fit". This script
and supporting files should be executable against python version 2.5.
An OrderedDict class (backported from a newer version of python) is included.
A MultiOrderedDict class is implemented so options, when added, should be able
to be added in order and allowed to have multiple values.
Currently the scripts supports the majority of endpoint options found in
res_sip.conf. Support has also been added for Aor(s) and the ACL/security
sections. Inside the sip_to_res_sip.py file one can see a list of options
that still need to be mapped.
Also items that still need to be done: templates, includes, parsing '=>'
delimiter. Note that some code is hopefully in place already to support
templates (e.g. lookup/retrieving defaults from them). However, the
parsing of and adding of the section needs to be done.
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@394024 65c4cc65-6c06-0410-ace0-fbb531ad65f3
Don't regenrate cat.cfg, ca.crt and ca.key if they were already created
on a previous run.
(closes issue ASTERISK-21932)
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@393383 65c4cc65-6c06-0410-ace0-fbb531ad65f3
This patch updates the autosupport script to collect all information available
to the Asterisk CLI command "digium_phones". It also makes minor improvements
in options handling.
(closes issue AST-1163)
Reported by: Trey Blancher
patches:
390347_autosupport.diff uploaded by tblancher (License 5821)
390348_autosupport.diff uploaded by tblancher (License 5821)
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@392409 65c4cc65-6c06-0410-ace0-fbb531ad65f3
When r383579 was committed, it made Jansson a required dependency.
While libjansson-dev and jansson-devel are available on recent
distros, some older (but still supported) distros don't have
it. There's a pull request[1] to get it into repoforge, but that still
doesn't help everyone. (And helps no one until the pull request is
merged and packages are built).
This patch adds Jansson install from source to the install_unpackaged()
function. There are a few gotcha's, which makes this change not
completely trivial.
* Since Jansson may be installed by a package, don't install from
source if a package installation can be found
* libresample may also be installed via package, so I added a
similar check to that.
* Since Jansson installs into /usr/local, this patch also adds
/usr/local/lib to /etc/ld.so.conf.d so that the library can be
found.
* The alternative was to install into /usr, but then it gets
complicated having to deal with EL's /usr/lib{32,64} shenanigans.
[1]: https://github.com/repoforge/rpms/pull/250
Review: https://reviewboard.asterisk.org/r/2414/
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@384488 65c4cc65-6c06-0410-ace0-fbb531ad65f3
This patch adds support for RFC 3327 "Path" headers. This can be enabled in
sip.conf using the 'supportpath' setting, either on a global basis or on a
peer basis. This setting enables Asterisk to route outgoing out-of-dialog
requests via a set of proxies by using a pre-loaded route-set defined by the
Path headers in the REGISTER request. This patch also adds Realtime support
for dynamically updating the Path information for a peer.
A huge thank-you to Klaus Darillion and Olle E Johansson for their efforts
in writing this patch.
Review: https://reviewboard.asterisk.org/r/2235/
Review: https://reviewboard.asterisk.org/r/991/
(closes issue ASTERISK-16884)
Reported by: klaus3000
Tested by: klaus3000, oej, mjordan
patches:
path-1.8.0-patch.txt uploaded by klaus3000 (License 5054)
oolong-path-support-trunk in team branch by oej (License 5267)
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@382440 65c4cc65-6c06-0410-ace0-fbb531ad65f3
The original report had to do with a realtime peer behind NAT being pruned and
the peer's private address being used instead of its external address. Upon
debugging, it was discovered that this was being caused by the addition of
the auto_force_rport and auto_comedia settings.
This patch does the following:
* Adds a missing note to the CHANGES file indicating that the default global nat
setting is auto_force_rport
* Constify the 'req' parameter for check_via()
* Add calls to check_via() in a couple of places in order for the auto_*
settings to do their job in attempting to determine if NAT is involved
* Set the flags SIP_NAT_FORCE_RPORT and SIP_PAGE2_SYMMETRICRTP if the auto_*
settings are in use where it was needed
* Moves the copying of peer flags up in build_peer() to before they are used;
this fixes the realtime prune issue
* Update the contrib/realtime schemas to allow the nat column to handle the
different nat setting combinations we have
This patch received a review and "Ship It!" on the issue itself.
(closes issue ASTERISK-20904)
Reported by: JoshE
Tested by: JoshE, Michael L. Young
Patches:
asterisk-20904-nat-auto-and-rt-peersv2.diff Michael L. Young (license 5026)
........
Merged revisions 382322 from http://svn.asterisk.org/svn/asterisk/branches/11
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@382323 65c4cc65-6c06-0410-ace0-fbb531ad65f3
This adds the ability to get the DPMA version, a listing of the local
firmware directory, and indexes of configured remote directories.
(closes issue AST-1070)
Reported By: Malcolm Davenport
Tested By: Kinsey Moore <kmoore@digium.com>
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@380004 65c4cc65-6c06-0410-ace0-fbb531ad65f3
When r376428 was commited to re-order start up sequences to be more tolerant of
forking with thread primitives, a few items were changed that caused changes
in behavior on some distros. This includes:
* Not displaying the splash screen on a remote console.
* Displaying an error message on stderr when a remote console cannot connect
to a running instance of Asterisk.
In the first case, the splash screen was re-added (thanks to Michael L. Young).
In the second case, the various init.d scripts were modified to pipe stderr
to /dev/null, as the error message is useful - if you execute a remote
console or a remote console command execution and it fail, it should tell
you. Note that the error message was always present, it just failed to be
printed prior to r376428.
Much thanks to the folks who quickly reported this problem, provided solutions,
and promptly tested the various init.d scripts on a variety of distros.
(closes issue ASTERISK-20945)
Reported by: Warren Selby
Tested by: Michael L. Young, Jamuel Starkey, kaldemar, Danny Nicholas, mjordan
patches:
asterisk-20945-remote-intro-msg.diff uploaded by elguero (license 5026)
ASTERISK-20945-1.8-mjordan.diff uploaded by mjordan (license 6283)
........
Merged revisions 379760 from http://svn.asterisk.org/svn/asterisk/branches/1.8
........
Merged revisions 379777 from http://svn.asterisk.org/svn/asterisk/branches/10
........
Merged revisions 379790 from http://svn.asterisk.org/svn/asterisk/branches/11
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@379791 65c4cc65-6c06-0410-ace0-fbb531ad65f3
This provides a JSON API by pulling in and wrapping the Jansson JSON
library[1]. The Asterisk API basically mirrors the Jansson
functionality, with a few minor tweaks.
* Some names have been asteriskified to protect the innocent.
* Jansson provides both reference-stealing and reference-borrowing
versions of several API's. The Asterisk API is exclusively
reference-stealing for operations that put elements into arrays and
objects.
* No support for doubles, since we usually don't need that.
* Coming along for the ride is the ast_test_validate macro, which made
the unit tests much easier to write.
[1]: http://www.digip.org/jansson/
(issue ASTERISK-20887)
(closes issue ASTERISK-20888)
Review: https://reviewboard.asterisk.org/r/2264/
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@378915 65c4cc65-6c06-0410-ace0-fbb531ad65f3
This is an interesting feature that allows additional strings to be used to
search the Directory, primarily intended to be used with nicknames, but could
be used with affiliations and the like. Because the name field is used in
more than one place (such as email notifications), it is important that these
additional strings not be placed in the name field, but be specified
separately.
Review: https://reviewboard.asterisk.org/r/2244/
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@378414 65c4cc65-6c06-0410-ace0-fbb531ad65f3
In ASTERISK-20726 UUID was added to Asterisk. This commit is to add the dependancies to the install script
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@378259 65c4cc65-6c06-0410-ace0-fbb531ad65f3
Update and extend the configuration_file group and enable linking. Commit other cleanups from multi-version Doxygen testing. Update title that was left behind many years ago.
(issue ASTERISK-20259)
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@375182 65c4cc65-6c06-0410-ace0-fbb531ad65f3
During testing I used an alternate output directory and mistakenly committed it. Matt Jordan noticed and I reverted. This is the correct setting for local output to match with all branches.
(issue ASTERISK-20259)
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@374948 65c4cc65-6c06-0410-ace0-fbb531ad65f3
Add Doxygen to the Debian install list. I will check for other platforms like Red Hat
(issue ASTERISK-20259)
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@374897 65c4cc65-6c06-0410-ace0-fbb531ad65f3
Revert a local testing config that I made. This was not intended to be committed.
Thank you Matt Jordan for noticing this.
(issue ASTERISK-20259)
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@374879 65c4cc65-6c06-0410-ace0-fbb531ad65f3
* Whitespace, doc-blocks, spelling, case, missing and incorrect tags.
* Add cleanup to Makefile for the Doxygen configuration update
* Start updating Doxygen configuration for cleaner output
* Enable inclusion of configuration files into documentation
* remove mantisworkflow...
* update documentation README
* Add markup to Tilghman's email and talk with him about updating his email, he knows...
* no code changes on this commit other than the mentioned Makefile change
(issue ASTERISK-20259)
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@373384 65c4cc65-6c06-0410-ace0-fbb531ad65f3
This annoying update is almost totally whitespace and updated config comments. I did add Python to the documented file types.
(issue ASTERISK-20259)
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@373341 65c4cc65-6c06-0410-ace0-fbb531ad65f3
All voicemails now have a 'msg_id' included in their metadata. The ODBC
message storage backend now requires this column; as such, the MySQL contrib
script that creates the voicemail_data table has been updated with the appropriate
column information.
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@370820 65c4cc65-6c06-0410-ace0-fbb531ad65f3
This patch changes the Asterisk configure script and build system to detect
the presence of the NetBSD editline library (libedit) on the system. If it is
found, it will be used in preference to the version included in the Asterisk
source tree.
(closes issue ASTERISK-18725)
Reported by: Jeffrey C. Ollie
Review: https://reviewboard.asterisk.org/r/1528/
Patches:
0001-Allow-linking-building-against-an-external-editline.patch uploaded by jcollie (license #5373) (heavily modified by kpfleming)
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@370481 65c4cc65-6c06-0410-ace0-fbb531ad65f3
contrib/scripts/live_ast currently assumes that it is being run from the
top-level directory of the source tree. It creates a script that will
also set the working directory.
This fix avoids the need to set the working directory if the caller sets
LIVE_AST_BASE_DIR instead.
It relies on realpath for that. If realpath is not available, it will
fall back to the original behaviour.
Review: https://reviewboard.asterisk.org/r/2027/
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@370048 65c4cc65-6c06-0410-ace0-fbb531ad65f3
Presence support has been added. This is accomplished by
allowing for presence hints in addition to device state
hints. A dialplan function called PRESENCE_STATE has been
added to allow for setting and reading presence. Presence
can be transmitted to Digium phones using custom XML
elements in a PIDF presence document.
Voicemail has new APIs that allow for moving, removing,
forwarding, and playing messages. Messages have had a new
unique message ID added to them so that the APIs will work
reliably. The state of a voicemail mailbox can be obtained
using an API that allows one to get a snapshot of the mailbox.
A voicemail Dialplan App called VoiceMailPlayMsg has been
added to be able to play back a specific message.
Configuration hooks have been added. Configuration hooks
allow for a piece of code to be executed when a specific
configuration file is loaded by a specific module. This is
useful for modules that are dependent on the configuration
of other modules.
chan_sip now has a public method that allows for a custom
SIP INFO request to be sent mid-dialog. Digium phones use
this in order to display progress bars when files are played.
Messaging support has been expanded a bit. The main
visible difference is the addition of an AMI action
MessageSend.
Finally, a ParkingLots manager action has been added in order
to get a list of parking lots.
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@368435 65c4cc65-6c06-0410-ace0-fbb531ad65f3
actually remove res_ais. This commit removes it.
In addition, the 'install_prereq' script has been updated to no longer install
AIS dependency packages, and instead install Corosync packages instead.
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@354459 65c4cc65-6c06-0410-ace0-fbb531ad65f3
This patch is based on the one by David Vossel, developer extrodinaire, at
https://reviewboard.asterisk.org/r/344/. If multiple peers are defined with the
same host/port, but differing callbackextensions, it chooses the peer with the
matching callbackextension. Since callbackextension creates an outbound
registration with the callbackextension as the Contact address, matching an
incoming request by that (in addition to the host/port) makes a lot of sense.
This patch also adds support for callbackextension to realtime by querying all
peers with callbackextensions on reload and adding registrations for them.
(closes issue ASTERISK-13456)
Review: https://reviewboard.asterisk.org/r/344/
Review: https://reviewboard.asterisk.org/r/1717/
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@354458 65c4cc65-6c06-0410-ace0-fbb531ad65f3
George Joseph
Matthew Jordan
Richard Mudgett
Kevin Harwell
Joshua Colp
Walter Doekes
Scott Griepentrog
Corey Farrell
Jonathan Rose
Tzafrir Cohen
Sean Bright
Kinsey Moore
Mark Michelson
David M. Lee
Jason Parker
Michael L. Young
Andrew Latham
Tilghman Lesher
Russell Bryant
Kevin P. Fleming
Igor Goncharovskiy
Terry Wilson