asterisk

Commit Graph

Author	SHA1	Message	Date
Florent CHAUVEAU	c44e7e85ec	audiosocket: added support for DTMF frames Updated the AudioSocket protocol to allow sending DTMF frames. AST_FRAME_DTMF frames are now forwarded to the server, in addition to AST_FRAME_AUDIO frames. A new payload type AST_AUDIOSOCKET_KIND_DTMF with value 0x03 was added to the protocol. The payload is a 1-byte ascii representing the DTMF digit (0-9,,#...). UserNote: The AudioSocket protocol now forwards DTMF frames with payload type 0x03. The payload is a 1-byte ascii representing the DTMF digit (0-9,,#...).	10 months ago
Norm Harrison	5cfc79ebea	asterisk/channel.h: fix documentation for 'ast_waitfor_nandfds()' Co-authored-by: Florent CHAUVEAU <florentch@pm.me>	10 months ago
Norm Harrison	218c64c4eb	audiosocket: fix timeout, fix dialplan app exit, server address in logs - Correct wait timeout logic in the dialplan application. - Include server address in log messages for better traceability. - Allow dialplan app to exit gracefully on hangup messages and socket closure. - Optimize I/O by reducing redundant read()/write() operations. Co-authored-by: Florent CHAUVEAU <florentch@pm.me>	10 months ago
Mark Murawski	51f9e1f1ba	chan_pjsip: Add the same details as PJSIPShowContacts to the CLI via 'pjsip show contact' CLI 'pjsip show contact' does not show enough information. One must telnet to AMI or write a script to ask Asterisk for example what the User-Agent is on a Contact This feature adds the same details as PJSIPShowContacts to the CLI Resolves: #643	10 months ago
Zhai Liangliang	c9a85f7124	Update config.guess and config.sub	10 months ago
Alexei Gradinari	ad178d155d	chan_pjsip: set correct Endpoint Device State on multiple channels 1. When one channel is placed on hold, the device state is set to ONHOLD without checking other channels states. In case of AST_CONTROL_HOLD set the device state as AST_DEVICE_UNKNOWN to calculate aggregate device state of all active channels. 2. The current implementation incorrectly classifies channels in use. The only channels that has the states: UP, RING and BUSY are considered as "in use". A channel should be considered "in use" if its state is anything other than DOWN or RESERVED. 3. Currently, if the number of channels "in use" is greater than device_state_busy_at, the system does not set the state to BUSY. Instead, it incorrectly assigns an aggregate device state. The endpoint device state should be BUSY if the number of channels "in use" is greater than or equal to device_state_busy_at. Fixes: #1181	10 months ago
Allan Nathanson	df8c32f092	file.c: missing "custom" sound files should not generate warning logs With `sounds_search_custom_dir = yes` we first look to see if a sound file is present in the "custom" sound directory before looking in the standard sound directories. We should not be issuing a WARNING log message if a sound cannot be found in the "custom" directory. Resolves: https://github.com/asterisk/asterisk/issues/1170	11 months ago
Ben Ford	11684bc0d3	documentation: Update Gosub, Goto, and add new documentationtype. Gosub and Goto were not displaying their syntax correctly on the docs site. This change adds a new way to specify an optional context, an optional extension, and a required priority that the xml stylesheet can parse without having to know which optional parameters come in which order. In Asterisk, it looks like this: parameter name="context" documentationtype="dialplan_context" parameter name="extension" documentationtype="dialplan_extension" parameter name="priority" documentationtype="dialplan_priority" required="true" The stylesheet will ignore the context and extension parameters, but for priority, it will automatically inject the following: [[context,]extension,]priority This is the correct oder for applications such as Gosub and Goto.	11 months ago
Sean Bright	92b005abf8	res_config_curl.c: Remove unnecessary warnings. Resolves: #1164	11 months ago
George Joseph	92e02c1574	res_pjsip_outbound_registration.c: Remove xpointer reference to user_agent. Commit `e86f937e` added AMI documentation to the module but the cherry-pick from master to the 20 branch pulled in an xpointer reference to the `user_agent` config option which doesn't actually exist in 20. This causes asterisk to fail to start because it can't load the core-en_US.xml documentation file. The CI cherry-pick tests should have caught this but there was bug in the cherry-picker that was causing the commits to be cherry-picked to the wrong branch. Just removing the xpointer reference resolves the issue.	11 months ago
George Joseph	9f4b52bf2b	README.md: Updates and Fixes * Outdated information has been removed. * New links added. * Placeholder added for link to change logs. Going forward, the release process will create HTML versions of the README and change log and will update the link in the README to the current change log for the branch... * In the development branches, the link will always point to the current release on GitHub. * In the "releases/" branches and the tarballs, the link will point to the ChangeLogs/ChangeLog-<version>.html file in the source directory. On the downloads website, the link will point to the ChangeLog-<version>.html file in the same directory. Resolves: #1131	11 months ago
Sean Bright	3cafe10d21	res_rtp_asterisk.c: Don't truncate spec-compliant `ice-ufrag` or `ice-pwd`. RFC 8839[1] indicates that the `ice-ufrag` and `ice-pwd` attributes can be up to 256 bytes long. While we don't generate values of that size, we should be able to accomodate them without truncating. 1. https://www.rfc-editor.org/rfc/rfc8839#name-ice-ufrag-and-ice-pwd-attri	11 months ago
Joshua Elson	53f3ac7925	fix: Correct default flag for tcp_keepalive_enable option Resolves an issue where the tcp_keepalive_enable option was not properly enabled in the sample configuration due to an incorrect default flag setting. Fixes: #1149	11 months ago
Sean Bright	e86f937e3a	docs: AMI documentation fixes. Most of this patch is adding missing PJSIP-related event documentation, but the one functional change was adding a sorcery to-string handler for endpoint's `redirect_method` which was not showing up in the AMI event details or `pjsip show endpoint <endpoint>` output. The rest of the changes are summarized below: * app_agent_pool.c: Typo fix Epoche -> Epoch. * stasis_bridges.c: Add missing AttendedTransfer properties. * stasis_channels.c: Add missing AgentLogoff properties. * pjsip_manager.xml: - Add missing AorList properties. - Add missing AorDetail properties. - Add missing ContactList properties. - Add missing ContactStatusDetail properties. - Add missing EventDetail properties. - Add missing AuthList properties. - Add missing AuthDetail properties. - Add missing TransportDetail properties. - Add missing EndpointList properties. - Add missing IdentifyDetail properties. * res_pjsip_registrar.c: Add missing InboundRegistrationDetail documentation. * res_pjsip_pubsub.c: - Add missing ResourceListDetail documentation. - Add missing InboundSubscriptionDetail documentation. - Add missing OutboundSubscriptionDetail documentation. * res_pjsip_outbound_registration.c: Add missing OutboundRegistrationDetail documentation.	11 months ago
Allan Nathanson	eec9bed8af	config.c: #include of non-existent file should not crash Corrects a segmentation fault when a configuration file has a #include statement that referenced a file that does not exist. Resolves: https://github.com/asterisk/asterisk/issues/1139	11 months ago
George Joseph	266440ab20	manager.c: Check for restricted file in action_createconfig. The `CreateConfig` manager action now ensures that a config file can only be created in the AST_CONFIG_DIR unless `live_dangerously` is set. Resolves: #1122	11 months ago
George Joseph	cc267af3e1	swagger_model.py: Fix invalid escape sequence in get_list_parameter_type(). Recent python versions complain when backslashes in strings create invalid escape sequences. This causes issues for strings used as regex patterns like `'^List\[(.)\]$'` where you want the regex parser to treat `[` and `]` as literals. Double-backslashing is one way to fix it but simply converting the string to a raw string `re.match(r'^List\[(.)\]$', text)` is easier and less error prone.	11 months ago
Maximilian Fridrich	5565d00eb4	Revert "res_rtp_asterisk.c: Set Mark on rtp when timestamp skew is too big" This reverts commit `f30ad96b3f`. The original change was not RFC compliant and caused issues because it set the RTP marker bit in cases when it shouldn't be set. See the linked issue #1135 for a detailed explanation. Fixes: #1135.	11 months ago
Sean Bright	ccc596ab5f	res_rtp_asterisk.c: Use correct timeout value for T.140 RED timer. Found while reviewing #1128	11 months ago
Luz Paz	43599cfb2a	docs: Fix typos in cdr/ Found via codespell	12 months ago
Luz Paz	aa20bfcf99	docs: Fix various typos in channels/ Found via `codespell -q 3 -S "./CREDITS,*.po" -L abd,asent,atleast,cachable,childrens,contentn,crypted,dne,durationm,enew,exten,inout,leapyear,mye,nd,oclock,offsetp,ot,parm,parms,preceeding,pris,ptd,requestor,re-use,re-used,re-uses,ser,siz,slanguage,slin,thirdparty,varn,varns,ues`	12 months ago
Luz Paz	d2bcdb71f8	docs: Fix various typos in main/ Found via `codespell -q 3 -S "./CREDITS" -L abd,asent,atleast,childrens,contentn,crypted,dne,durationm,exten,inout,leapyear,nd,oclock,offsetp,ot,parm,parms,requestor,ser,slanguage,slin,thirdparty,varn,varns,ues`	12 months ago
George Joseph	6cf62b6032	bridging: Fix multiple bridging issues causing SEGVs and FRACKs. Issues: * The bridging core allowed multiple bridges to be created with the same unique bridgeId at the same time. Only the last bridge created with the duplicate name was actually saved to the core bridges container. * The bridging core was creating a stasis topic for the bridge and saving it in the bridge->topic field but not increasing its reference count. In the case where two bridges were created with the same uniqueid (which is also the topic name), the second bridge would get the _existing_ topic the first bridge created. When the first bridge was destroyed, it would take the topic with it so when the second bridge attempted to publish a message to it it either FRACKed or SEGVd. * The bridge destructor, which also destroys the bridge topic, is run from the bridge manager thread not the caller's thread. This makes it possible for an ARI developer to create a new one with the same uniqueid believing the old one was destroyed when, in fact, the old one's destructor hadn't completed. This could cause the new bridge to get the old one's topic just before the topic was destroyed. When the new bridge attempted to publish a message on that topic, asterisk could either FRACK or SEGV. * The ARI bridges resource also allowed multiple bridges to be created with the same uniqueid but it kept the duplicate bridges in its app_bridges container. This created a situation where if you added two bridges with the same "bridge1" uniqueid, all operations on "bridge1" were performed on the first bridge created and the second was basically orphaned. If you attempted to delete what you thought was the second bridge, you actually deleted the first one created. Changes: * A new API `ast_bridge_topic_exists(uniqueid)` was created to determine if a topic already exists for a bridge. * `bridge_base_init()` in bridge.c and `ast_ari_bridges_create()` in resource_bridges.c now call `ast_bridge_topic_exists(uniqueid)` to check if a bridge with the requested uniqueid already exists and will fail if it does. * `bridge_register()` in bridges.c now checks the core bridges container to make sure a bridge doesn't already exist with the requested uniqueid. Although most callers of `bridge_register()` will have already called `bridge_base_init()`, which will now fail on duplicate bridges, there is no guarantee of this so we must check again. * The core bridges container allocation was changed to reject duplicate uniqueids instead of silently replacing an existing one. This is a "belt and suspenders" check. * A global mutex was added to bridge.c to prevent concurrent calls to `bridge_base_init()` and `bridge_register()`. * Even though you can no longer create multiple bridges with the same uniqueid at the same time, it's still possible that the bridge topic might be destroyed while a second bridge with the same uniqueid was trying to use it. To address this, the bridging core now increments the reference count on bridge->topic when a bridge is created and decrements it when the bridge is destroyed. * `bridge_create_common()` in res_stasis.c now checks the stasis app_bridges container to make sure a bridge with the requested uniqueid doesn't already exist. This may seem like overkill but there are so many entrypoints to bridge creation that we need to be safe and catch issues as soon in the process as possible. * The stasis app_bridges container allocation was changed to reject duplicate uniqueids instead of adding them. This is a "belt and suspenders" check. * The `bridge show all` CLI command now shows the bridge name as well as the bridge id. * Response code 409 "Conflict" was added as a possible response from the ARI bridge create resources to signal that a bridge with the requested uniqueid already exists. * Additional debugging was added to multiple bridging and stasis files. Resolves: #211	12 months ago
George Joseph	32b0b47348	.github: Change concurrency group ids so they're unique. GitHub strikes again. Apparently the github.ref context variable only contains the PR number if the workflow is triggered by "pull_request" so since we just changed the trigger to "pull_request_target" the variable no longer contains the PR number and is therefore not unique and can't be used as a concurrency group id. We now use `github.triggering_actor-github.head_ref`.	12 months ago
Mike Bradeen	a39f3d5adb	bridge_channel: don't set cause code on channel during bridge delete if already set Due to a potential race condition via ARI when hanging up a channel hangup with cause while also deleting a bridge containing that channel, the bridge delete can over-write the hangup cause code resulting in Normal Call Clearing instead of the set value. With this change, bridge deletion will only set the hangup code if it hasn't been previously set. Resolves: #1124	12 months ago
George Joseph	f4d881803a	.github: Refactor Releaser to use reusable workflow	12 months ago
George Joseph	a5d37e5ecb	.github: Change branch of reusable workflows to main.	12 months ago
George Joseph	1f56d5fe7e	.github: Refactor to use pull_request_target trigger. After careful review, we believe we can now use the "pull_request_target" workflow trigger instead of "pull_request" which required a separate privliged workflow to add labels and comments to PRs when they are submitted or updated. This allows us to greatly streamline our workflows and remove unneeded ones. * The OnPRChanged workflow was... * Renamed to OnPRCheck * Changed to trigger on pull_request_target and the "recheckpr" label. * Changed to simply call reusable workflows in asterisk-ci-actions. * Changed to use better concurrency groups. * The OnPRCPCheck and OnPRMergeApproved workflows were also... * Changed to simply call reusable workflows in asterisk-ci-actions. * Changed to use better concurrency groups. * The NightlyTest and CreateDocs were also tweaked	12 months ago
George Joseph	fdbb9e29dd	res_config_pgsql: Fix regression that removed dbname config. A recent commit accidentally removed the code that sets dbname. This commit adds it back in. Resolves: #1119	12 months ago
George Joseph	0b6a3df331	res_stir_shaken: Allow missing or anonymous CID to continue to the dialplan. The verification check for missing or anonymous callerid was happening before the endpoint's profile was retrieved which meant that the failure_action parameter wasn't available. Therefore, if verification was enabled and there was no callerid or it was "anonymous", the call was immediately terminated instead of giving the dialplan the ability to decide what to do with the call. * The callerid check now happens after the verification context is created and the endpoint's stir_shaken_profile is available. * The check now processes the callerid failure just as it does for other verification failures and respects the failure_action parameter. If set to "continue" or "continue_return_reason", `STIR_SHAKEN(0,verify_result)` in the dialplan will return "invalid_or_no_callerid". * If the endpoint's failure_action is "reject_request", the call will be rejected with `433 "Anonymity Disallowed"`. * If the endpoint's failure_action is "continue_return_reason", the call will continue but a `Reason: STIR; cause=433; text="Anonymity Disallowed"` header will be added to the next provisional or final response. Resolves: #1112	12 months ago
George Joseph	873c247f75	resource_channels.c: Fix memory leak in ast_ari_channels_external_media. Between ast_ari_channels_external_media(), external_media_rtp_udp(), and external_media_audiosocket_tcp(), the `variables` structure being passed around wasn't being cleaned up properly when there was a failure. * In ast_ari_channels_external_media(), the `variables` structure is now defined with RAII_VAR to ensure it always gets cleaned up. * The ast_variables_destroy() call was removed from external_media_rtp_udp(). * The ast_variables_destroy() call was removed from external_media_audiosocket_tcp(), its `endpoint` allocation was changed to to use ast_asprintf() as external_media_rtp_udp() does, and it now returns an error on failure. * ast_ari_channels_external_media() now checks the new return code from external_media_audiosocket_tcp() and sets the appropriate error response. Resolves: #1109	12 months ago
Holger Hans Peter Freyther	5e4fca062c	ari/pjsip: Make it possible to control transfers through ARI Introduce a ChannelTransfer event and the ability to notify progress to ARI. Implement emitting this event from the PJSIP channel instead of handling the transfer in Asterisk when configured. Introduce a dialplan function to the PJSIP channel to switch between the "core" and "ari-only" behavior. UserNote: Call transfers on the PJSIP channel can now be controlled by ARI. This can be enabled by using the PJSIP_TRANSFER_HANDLING(ari-only) dialplan function.	12 months ago
George Joseph	00af359ea9	.github: Remove concurrency check in on-labelled workflows. Apparently you can't use `${{ github.event.number }}` in a concurrency block in a job that calls a reusable workflow. :(	12 months ago
Sean Bright	0883e5e44d	channel.c: Remove dead AST_GENERATOR_FD code. Nothing ever sets the `AST_GENERATOR_FD`, so this block of code will never execute. It also is the only place where the `generate` callback is called with the channel lock held which made it difficult to reason about the thread safety of `ast_generator`s. In passing, also note that `AST_AGENT_FD` isn't used either.	12 months ago
George Joseph	eedb73968b	.github: Move PRChanged,PRChangedPriv,PRCPCheck,PRReCheck,PRMerge logic. Moved to asterisk-ci-actions reusable workflows.	12 months ago
George Joseph	a5b3709455	.github: OnPRCherryPickTest,OnPRStateChanged,OnPRRecheck: Add job summaries. ...and refactor environment variables.	12 months ago
George Joseph	00bf3aaaec	.github: Clean up CreateDocs	12 months ago
George Joseph	1d5a6f5706	func_strings.c: Prevent SEGV in HASH single-argument mode. When in single-argument mode (very rarely used), a malformation of a column name (also very rare) could cause a NULL to be returned when retrieving the channel variable for that column. Passing that to strncat causes a SEGV. We now check for the NULL and print a warning message. Resolves: #1101	1 year ago
George Joseph	a1b0d3492a	docs: Add version information to AGI command XML elements. This process was a bit different than the others because everything is in the same file, there's an array that contains the command names and their handler functions, and the last command was created over 15 years ago. * Dump a `git blame` of res/res_agi.c from BEFORE the handle_* prototypes were changed. * Create a command <> handler function xref by parsing the the agi_command array. * For each entry, grep the function definition line "static int handle_" from the git blame output and capture the commit. This will be the commit the command was created in. Do a `git tag --contains <commit> \| sort -V \| head -1` to get the tag the function was created in. * Add a single since/version element to the command XML. Multiple versions aren't supported here because the branching and tagging scheme changed several times in the 2000's.	1 year ago
Jeremy Lainé	575545b49c	docs: Fix minor typo in MixMonitor AMI action The `Options` argument was erroneously documented as lowercase `options`.	1 year ago
Naveen Albert	9bb081a090	utils: Disable old style definition warnings for libdb. Newer versions of gcc now warn about old style definitions, such as those in libdb, which causes compilation failure with DEVMODE enabled. Ignore these warnings for libdb. Resolves: #1085	1 year ago
fabriziopicconi	eb80d997ac	rtp.conf.sample: Correct stunaddr example.	1 year ago
George Joseph	dcf5ac0474	docs: Add version information to ARI resources and methods. * Dump a git blame of each file in rest-api/api-docs. * Get the commit for each "resourcePath" and "httpMethod" entry. * Find the tags for each commit (same as other processes). * Insert a "since" array after each "resourcePath" and "httpMethod" entry.	1 year ago
George Joseph	29167b00dc	res_pjsip_authenticator_digest: Make correct error messages appear again. When an incoming request can't be matched to an endpoint, the "artificial" auth object is used to create a challenge to return in a 401 response and we emit a "No matching endpoint found" log message. If the client then responds with an Authorization header but the request still can't be matched to an endpoint, the verification will fail and, as before, we'll create a challenge to return in a 401 response and we emit a "No matching endpoint found" log message. HOWEVER, because there WAS an Authorization header and it failed verification, we should have also been emitting a "Failed to authenticate" log message but weren't because there was a check that short-circuited that it if the artificial auth was used. Since many admins use the "Failed to authenticate" message with log parsers like fail2ban, those attempts were not being recognized as suspicious. Changes: * digest_check_auth() now always emits the "Failed to authenticate" log message if verification of an Authorization header failed even if the artificial auth was used. * The verification logic was refactored to be clearer about the handling of the return codes from verify(). * Comments were added clarify what return codes digest_check_auth() should return to the distributor and the implications of changing them. Resolves: #1095	1 year ago
George Joseph	8706a485c3	alembic: Database updates required. This commit doesn't actually change anything. It just adds the following upgrade notes that were omitted from the original commits. Resolves: #1097 UpgradeNote: Two commits in this release... 'Add SHA-256 and SHA-512-256 as authentication digest algorithms' 'res_pjsip: Add new AOR option "qualify_2xx_only"' ...have modified alembic scripts for the following database tables: ps_aors, ps_contacts, ps_auths, ps_globals. If you don't use the scripts to update your database, reads from those tables will succeeed but inserts into the ps_contacts table by res_pjsip_registrar will fail.	1 year ago
Sean Bright	174006fcaa	docs: Indent <since> tags. Also updates the 'since' of applications/functions that existed before XML documentation was introduced (1.6.2.0).	1 year ago
George Joseph	ec22c1dd4d	res_pjsip: Fix startup/reload memory leak in config_auth. An issue in config_auth.c:ast_sip_auth_digest_algorithms_vector_init() was causing double allocations for the two supported_algorithms vectors to the tune of 915 bytes. The leak only happens on startup and when a reload is done and doesn't get bigger with the number of auth objects defined. * Pre-initialized the two vectors in config_auth:auth_alloc(). * Removed the allocations in ast_sip_auth_digest_algorithms_vector_init(). * Added a note to the doc for ast_sip_auth_digest_algorithms_vector_init() noting that the vector passed in should be initialized and empty. * Simplified the create_artificial_auth() function in pjsip_distributor. * Set the vector initialization count to 0 in config_global:global_apply().	1 year ago
George Joseph	54d67711f8	docs: Add version information to application and function XML elements * Do a git blame on the embedded XML application or function element. * From the commit hash, grab the summary line. * Do a git log --grep <summary> to find the cherry-pick commits in all branches that match. * Do a git patch-id to ensure the commits are all related and didn't get a false match on the summary. * Do a git tag --contains <commit> to find the tags that contain each commit. * Weed out all tags not ..0. * Sort and discard any .0.0 and following tags where the commit appeared in an earlier branch. * The result is a single tag for each branch where the application or function was defined. The applications and functions defined in the following files were done by hand because the XML was extracted from the C source file relatively recently. * channels/pjsip/dialplan_functions_doc.xml * main/logger_doc.xml * main/manager_doc.xml * res/res_geolocation/geoloc_doc.xml * res/res_stir_shaken/stir_shaken_doc.xml	1 year ago
George Joseph	2897d87a99	docs: Add version information to manager event instance XML elements * Do a git blame on the embedded XML managerEvent elements. * From the commit hash, grab the summary line. * Do a git log --grep <summary> to find the cherry-pick commits in all branches that match. * Do a git patch-id to ensure the commits are all related and didn't get a false match on the summary. * Do a git tag --contains <commit> to find the tags that contain each commit. * Weed out all tags not ..0. * Sort and discard any .0.0 and following tags where the commit appeared in an earlier branch. * The result is a single tag for each branch where the application or function was defined. The events defined in res/res_pjsip/pjsip_manager.xml were done by hand because the XML was extracted from the C source file relatively recently. Two bugs were fixed along the way... * The get_documentation awk script was exiting after it processed the first DOCUMENTATION block it found in a file. We have at least 1 source file with multiple DOCUMENTATION blocks so only the first one in them was being processed. The awk script was changed to continue searching rather than exiting after the first block. * Fixing the awk script revealed an issue in logger.c where the third DOCUMENTATION block contained a XML fragment that consisted only of a managerEventInstance element that wasn't wrapped in a managerEvent element. Since logger_doc.xml already existed, the remaining fragments in logger.c were moved to it and properly organized.	1 year ago
Joshua C. Colp	80a28f40ac	LICENSE: Update company name, email, and address.	1 year ago

1 2 3 4 5 ...

34068 Commits (c44e7e85ecd73ccddd90da3acc94bbcb66a43330) All Branches Search

34068 Commits (c44e7e85ecd73ccddd90da3acc94bbcb66a43330)

All Branches