2773 Commits (bd10c86c64b770137ee196742ab0977103c8dce3)

Author	SHA1	Message	Date
Richard Mudgett	70fbe9dc14	Add missing end-of-file line terminators. ... git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@395255 65c4cc65-6c06-0410-ace0-fbb531ad65f3	13 years ago
Matthew Jordan	d91dc6d1a8	Perform the initial renaming of the Bridging API ... This patch does the following: * It pulls out bridge_channel and puts it into its own translation unit * It adds public and protected headers for bridging_channel. Protected functions are appropriate only for the Bridging API and sub-classes of a bridge. (issue ASTERISK-22130) git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@395253 65c4cc65-6c06-0410-ace0-fbb531ad65f3	13 years ago
Jonathan Rose	f3fcf0aa2e	func_channel: dtmf_features setting ... Allows reading andsetting dtmf features via a channel function CHANNEL(dtmf_features) (closes issue ASTERISK-21876) Reported by: Matt Jordan Review: https://reviewboard.asterisk.org/r/2648/ git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@395215 65c4cc65-6c06-0410-ace0-fbb531ad65f3	13 years ago
Richard Mudgett	f087b69fc4	Pull softmix bridge parameters into a sub structure. ... git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@395188 65c4cc65-6c06-0410-ace0-fbb531ad65f3	13 years ago
Mark Michelson	bf22391b8d	Make DTMF attended transfer support feature-complete. ... This greatly modifies the operation of DTMF attended transfers so that the full range of options from features.conf applies. In addition, a new option has been added that allows for a transferer to switch between bridges during a transfer before completing the transfer. (closes issue ASTERISK-21543) reported by Matt Jordan Review: https://reviewboard.asterisk.org/r/2654 git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@395151 65c4cc65-6c06-0410-ace0-fbb531ad65f3	13 years ago
Kinsey Moore	98504fec8e	Add DTLS-SRTP support to chan_pjsip ... This patch introduces DTLS-SRTP support to chan_pjsip and the options necessary to configure it including an option to allow choosing between 32 and 80 byte SRTP tag lengths. During the implementation and testing of this patch, three other bugs were found and their fixes are included with this patch. The two in chan_sip were a segfault relating to DTLS setup and mistaken call rejection. The third bug fix prevents chan_pjsip from attempting to perform bridge optimization between two endpoints if either of them is running any form of SRTP. Review: https://reviewboard.asterisk.org/r/2683/ (closes issue ASTERISK-21419) git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@395121 65c4cc65-6c06-0410-ace0-fbb531ad65f3	13 years ago
David M. Lee	fec667646f	Fix bridge/channel AMI event ordering issues ... The stasis_cache_update messages are somewhat cumbersome to handle with the stasis_message_router. Since all updates have the same message type, they are normally handled with the same route. Since caching itself is a first class component of stasis-core, it makes sense for the router to handle the cache update messages itself. This patch adds stasis_message_router_add_cache_update() and stasis_message_router_remove_cache_update() to handle the routing of stasis_cache_update messages. This patch also corrects an issue with manager_{bridging,channels}.c, where events might be reordered. The reordering occurs because the components use different message routers, which they needed because they both needed to route cache update messages. They now both use manager's router, and add cache routes for just the cache updates they are interested in. (closes issue ASTERISK-22038) Review: https://reviewboard.asterisk.org/r/2677/ git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@395118 65c4cc65-6c06-0410-ace0-fbb531ad65f3	13 years ago
Joshua Colp	16885ffda5	Expose the chan_pjsip implementation pvt and session in a defined manner. ... This allows modules outside of chan_pjsip itself to get the session given only an Asterisk channel. Review: https://reviewboard.asterisk.org/r/2674/ git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@395102 65c4cc65-6c06-0410-ace0-fbb531ad65f3	13 years ago
Kinsey Moore	c3b8939be8	Add CEL local optimization record type ... This adds a new CEL event type, AST_CEL_LOCAL_OPTIMIZE, to represent local channel optimizations. Local channel optimizations were one of several things conveyed by the now defunct BRIDGE_UPDATE event type. This also adds a unit test to test generation of this new CEL event. Review: https://reviewboard.asterisk.org/r/2676/ git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@394870 65c4cc65-6c06-0410-ace0-fbb531ad65f3	13 years ago
Kinsey Moore	684c83b29b	Add transfer support to CEL ... This adds CEL support for blind and attended transfers and call pickup. During the course of adding this functionality I noticed that CONF_ENTER, CONF_EXIT, and BRIDGE_TO_CONF events are particularly useless without a bridge identifier, so I added that as well. This adds tests for blind transfers, several types of attended transfers, and call pickup. The extra field in CEL records now consists of a JSON blob whose fields are defined on a per-event basis. Review: https://reviewboard.asterisk.org/r/2658/ (closes issue ASTERISK-21565) git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@394858 65c4cc65-6c06-0410-ace0-fbb531ad65f3	13 years ago
Richard Mudgett	4e15046cf6	Regroup the ao2 search_flags. ... Moved the OBJ_POINTER, OBJ_KEY, and OBJ_PARTIAL_KEY flags together into a field and renamed them to OBJ_SEARCH_OBJECT, OBJ_SEARCH_KEY, and OBJ_SEARCH_PARTIAL_KEY respectively. The values were selected to keep existing code compiling and working until the codebase can be changed to stop using these values as bit flags and use them as an enum field. The old names are defined to the new names for backward compatibility. git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@394846 65c4cc65-6c06-0410-ace0-fbb531ad65f3	13 years ago
Richard Mudgett	643fb1ed14	Minor optimizations. ... * Made ast_audiohook_detach_list() and ast_audiohook_write_list_empty() NULL tolerant. * Made ast_audiohook_detach_list() return void since it is a destructor. git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@394836 65c4cc65-6c06-0410-ace0-fbb531ad65f3	13 years ago
Richard Mudgett	2838683742	Extract a repeated test into ast_channel_has_audio_frame_or_monitor(). ... git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@394825 65c4cc65-6c06-0410-ace0-fbb531ad65f3	13 years ago
Jonathan Rose	a6329a3acf	ARI: MOH start and stop for a channel ... (issue ASTERISK-21974) Reported by: Matt Jordan Review: https://reviewboard.asterisk.org/r/2680/ git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@394810 65c4cc65-6c06-0410-ace0-fbb531ad65f3	13 years ago
Jonathan Rose	17c546173f	ARI: Bridge Playback, Bridge Record ... Adds a new channel driver for creating channels for specific purposes in bridges, primarily to act as either recorders or announcers. Adds ARI commands for playing announcements to ever participant in a bridge as well as for recording a bridge. This patch also includes some documentation/reponse fixes to related ARI models such as playback controls. (closes issue ASTERISK-21592) Reported by: Matt Jordan (closes issue ASTERISK-21593) Reported by: Matt Jordan Review: https://reviewboard.asterisk.org/r/2670/ git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@394809 65c4cc65-6c06-0410-ace0-fbb531ad65f3	13 years ago
Kinsey Moore	5a8f32703c	Filter channels used as internal mechanisms ... This adds new flags to the channel tech properties that flag it as different types of implementation detail used exclusively to provide a feature. Examples of channels that would have these flags include the announcement and recording channels used by confbridge which are the only two marked as such by this patch. Review: https://reviewboard.asterisk.org/r/2633/ (closes issue ASTERISK-21873) git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@394808 65c4cc65-6c06-0410-ace0-fbb531ad65f3	13 years ago
Jason Parker	900714beb9	Convert CCSS manager events to stasis. ... (closes issue ASTERISK-21473) Review: https://reviewboard.asterisk.org/r/2682/ git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@394793 65c4cc65-6c06-0410-ace0-fbb531ad65f3	13 years ago
Richard Mudgett	e5d3deb299	Fixup doxygen on ast_hangup(). ... git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@394776 65c4cc65-6c06-0410-ace0-fbb531ad65f3	13 years ago
Mark Michelson	c47787feab	Add a bunch of options from sip.conf to res_sip.conf ... For a complete list of the options added, see the review linked at the bottom of this commit message. (closes issue ASTERISK-21506) reported by Matt Jordan Review: https://reviewboard.asterisk.org/r/2671 git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@394759 65c4cc65-6c06-0410-ace0-fbb531ad65f3	13 years ago
Jason Parker	c1a7567d24	ARI: Add support for suppressing media streams. ... Also convert res_mutestream to use the core feature behind this. (closes issue ASTERISK-21618) Review: https://reviewboard.asterisk.org/r/2652/ git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@394715 65c4cc65-6c06-0410-ace0-fbb531ad65f3	13 years ago
Richard Mudgett	40ce5e0d18	Change ast_hangup() to return void and be NULL safe. ... Since ast_hangup() is effectively a channel destructor, it should be a void function. * Make the few silly callers checking the return value no longer do so. Only the CDR and CEL unit tests checked the return value. * Make all callers take advantage of the NULL safe change and remove the NULL check before the call. git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@394623 65c4cc65-6c06-0410-ace0-fbb531ad65f3	13 years ago
Richard Mudgett	d43b17a872	Replace chan_agent with app_agent_pool. ... The ill conceived chan_agent is no more. It is now replaced by app_agent_pool. Agents login using the AgentLogin() application as before. The AgentLogin() application no longer does any authentication. Authentication is now the responsibility of the dialplan. (Besides, the authentication done by chan_agent did not match what the voice prompts asked for.) Sample extensions.conf [login] ; Sample agent 1001 login ; Set COLP for in between calls so the agent does not see the last caller COLP. exten => 1001,1,Set(CONNECTEDLINE(all)="Agent Waiting" <1001>) ; Give the agent DTMF transfer and disconnect features when connected to a caller. same => n,Set(CHANNEL(dtmf-features)=TX) same => n,AgentLogin(1001) same => n,NoOp(AGENT_STATUS is ${AGENT_STATUS}) same => n,Hangup() [caller] ; Sample caller direct connect to agent 1001 exten => 800,1,AgentRequest(1001) same => n,NoOp(AGENT_STATUS is ${AGENT_STATUS}) same => n,Hangup() ; Sample caller going through a Queue to agent 1001 exten => 900,1,Queue(agent_q) same => n,Hangup() Sample queues.conf [agent_q] member => Local/800@caller,,SuperAgent,Agent:1001 Under the hood operation overview: 1) Logged in agents wait for callers in an agents holding bridge. 2) Caller requests an agent using AgentRequest() 3) A basic bridge is created, the agent is notified, and caller joins the basic bridge to wait for the agent. 4) The agent is either automatically connected to the caller or must ack the call to connect. 5) The agent is moved from the agents holding bridge to the basic bridge. 6) The agent and caller talk. 7) The connection is ended by either party. 8) The agent goes back to the agents holding bridge. To avoid some locking issues with the agent holding bridge, I needed to make some changes to the after bridge callback support. The after bridge callback is now a list of requested callbacks with the last to be added the only active callback. The after bridge callback for failed callbacks will always happen in the channel thread when the channel leaves the bridging system or is destroyed. (closes issue ASTERISK-21554) Reported by: Matt Jordan Review: https://reviewboard.asterisk.org/r/2657/ git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@394417 65c4cc65-6c06-0410-ace0-fbb531ad65f3	13 years ago
Mark Michelson	d43bbfb74e	Remove misleading documentation for channel snapshot creation. ... git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@394402 65c4cc65-6c06-0410-ace0-fbb531ad65f3	13 years ago
Joshua Colp	b75b88e8f7	Remove some callbacks and functions which are not needed. ... git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@394370 65c4cc65-6c06-0410-ace0-fbb531ad65f3	13 years ago
Joshua Colp	238a54fa15	Add support to the bridging core for performing COLP updates when channels join a 2 party bridge. ... (closes issue ASTERISK-21829) Review: https://reviewboard.asterisk.org/r/2636/ git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@394249 65c4cc65-6c06-0410-ace0-fbb531ad65f3	13 years ago
Richard Mudgett	f5a1058316	Fix bridge tech write callback parameter name. ... git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@394158 65c4cc65-6c06-0410-ace0-fbb531ad65f3	13 years ago
Jason Parker	3355bb2fa5	Make SCOPED_LOCK use RAII_VAR. ... This fixes an issue with requiring SCOPED_LOCK to be the last variable declaration and removes duplicate code in the process. Review: https://reviewboard.asterisk.org/r/2665/ git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@393919 65c4cc65-6c06-0410-ace0-fbb531ad65f3	13 years ago
Richard Mudgett	bb7def1b5b	Fix some stasis doxygen comments. ... git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@393896 65c4cc65-6c06-0410-ace0-fbb531ad65f3	13 years ago
Joshua Colp	7c044acbd9	Refactor operations to access the stasis cache instead of objects directly when retrieving information. ... (closes issue ASTERISK-21883) Review: https://reviewboard.asterisk.org/r/2645/ git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@393831 65c4cc65-6c06-0410-ace0-fbb531ad65f3	13 years ago
Jason Parker	87973eecff	ARI: Add support for getting/setting channel and global variables. ... This allows for reading and writing of functions on channels. (closes issue ASTERISK-21868) Review: https://reviewboard.asterisk.org/r/2641/ git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@393806 65c4cc65-6c06-0410-ace0-fbb531ad65f3	13 years ago
Jason Parker	7422581b6d	Move channel driver Registry manager events to core. ... This also shuffles the stasis system topic and related handling. (closes issue ASTERISK-21488) Review: https://reviewboard.asterisk.org/r/2631/ git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@393804 65c4cc65-6c06-0410-ace0-fbb531ad65f3	13 years ago
Matthew Jordan	30d379851e	Create Local channel messages on the Stasis message bus and produce AMI events ... This patch does the following: * It adds a virtual table of callbacks to core_unreal. These callbacks can be supplied by concrete implementations of "unreal" channel drivers, which lets the unreal channel driver call specific functionality when it performs some action. Currently, this is done to notify implementations when an optimization operation has begun, and when an optimization operation has succeeded. * It adds Stasis-Core messages for Local channel bridging and Local channel optimization. Local channel optimization is now two events: a Begin and an End. Some consumers of Stasis-Core may want to know when an operation is beginning so that they can 'prepare' their information; others will be more concerned about when the operation has completed, so that they can 'fix up' information. Stasis-Core allows for both, as does AMI. Review: https://reviewboard.asterisk.org/r/2552 git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@393801 65c4cc65-6c06-0410-ace0-fbb531ad65f3	13 years ago
Matthew Jordan	b193c2873d	Handle hangup logic in the Stasis message bus and consumers of Stasis messages ... This patch does the following: * It adds a new soft hangup flag AST_SOFTHANGUP_HANGUP_EXEC that is set when a channel is executing dialplan hangup logic, i.e., the 'h' extension or a hangup handler. Stasis messages now also convey the soft hangup flag so consumers of the messages can know when a channel is executing said hangup logic. * It adds a new channel flag, AST_FLAG_DEAD, which is set when a channel is well and truly dead. Not just a zombie, but dead, Jim. Manager, CEL, CDRs, and other consumers of Stasis have been updated to look for this flag to know when the channel should by lying six feet under. * The CDR engine has been updated to better handle a channel entering and leaving a bridge. Previously, a new CDR was automatically created when a channel left a bridge and put into the 'Pending' state; however, this way of handling CDRs made it difficult for the 'endbeforehexten' logic to work correctly - there was always a new CDR waiting in the hangup logic and, even if 'ended', wouldn't be the CDR people wanted to inspect in the hangup routine. This patch completely removes the Pending state and instead defers creation of the new CDR until it gets a new message that requires a new CDR. git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@393777 65c4cc65-6c06-0410-ace0-fbb531ad65f3	13 years ago
Matthew Jordan	d0a55fa52d	Refactor RTCP events over to Stasis; associate with channels ... This patch does the following: * It merges Jaco Kroon's patch from ASTERISK-20754, which provides channel information in the RTCP events. Because Stasis provides a cache, Jaco's patch was modified to pass the channel uniqueid to the RTP layer as opposed to a pointer to the channel. This has the following benefits: (1) It keeps the RTP engine 'clean' of references back to channels (2) It prevents circular dependencies and other potential ref counting issues * The RTP engine now allows any RTP implementation to raise RTCP messages. Potentially, other implementations (such as res_rtp_multicast) could also raise RTCP information. The engine provides structs to represent RTCP headers and RTCP SR/RR reports. * Some general refactoring in res_rtp_asterisk was done to try and tame the RTCP code. It isn't perfect - that's *way* beyond the scope of this work - but it does feel marginally better. * A few random bugs were fixed in the RTCP statistics. (Example: performing an assignment of a = a is probably not correct) * We now raise RTCP events for each SR/RR sent/received. Previously we wouldn't raise an event when we sent a RR report. Note that this work will be of use to others who want to monitor call quality or build modules that report call quality statistics. Since the events are now moving across the Stasis message bus, this is far easier to accomplish. It is also a first step (though by no means the last step) towards getting Olle's pinefrog work incorporated. Again: note that the patch by Jaco Kroon was modified slightly for this work; however, he did all of the hard work in finding the right places to set the channel in the RTP engine across the channel drivers. Much thanks goes to Jaco for his hard work here. Review: https://reviewboard.asterisk.org/r/2603/ (closes issue ASTERISK-20574) Reported by: Jaco Kroon patches: asterisk-rtcp-channel.patch uploaded by jkroon (License 5671) (closes issue ASTERISK-21471) Reported by: Matt Jordan git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@393740 65c4cc65-6c06-0410-ace0-fbb531ad65f3	13 years ago
Matthew Jordan	4123b27f6f	Remove parkinglot from the channel snapshot ... Legacy channel drivers often include the ability to set a default parking lot on an endpoint basis; when channels are created for that endpoint, they inherit the parkinglot option. Parking used to use this option more frequently; while it is still supported, other options (such as using channel variables or creation of a custom parkinglot) are supported. More importantly, conveying the parkinglot information through a channel snapshot isn't terribly useful - it is rarely (if ever) changed on a channel and some consumers of channel snapshots, such as ARI, will never use the information. (closes issue ASTERISK-21968) Reported by: Matt Jordan git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@393716 65c4cc65-6c06-0410-ace0-fbb531ad65f3	13 years ago
Jonathan Rose	93ed5ef0ff	res_parking: Replace Parker snapshots with ParkerDialString ... This process also involved a large amount of rework regarding how to redial the Parker when a channel leaves a parking lot due to timeout. An attended transfer channel variable has been added to attended transfers to extensions that will eventually park (but haven't at the time of transfer) as well. This resolves one of the two BUGBUG comments remaining in res_parking. (issues ASTERISK-21877) Reported by: Matt Jordan Review: https://reviewboard.asterisk.org/r/2638/ git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@393704 65c4cc65-6c06-0410-ace0-fbb531ad65f3	13 years ago
Richard Mudgett	02f55a36a0	Revert accidental overcommit. ... git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@393632 65c4cc65-6c06-0410-ace0-fbb531ad65f3	13 years ago
Richard Mudgett	b4e9a3fc2f	Add BUGBUG note for ASTERISK-22009 ... git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@393631 65c4cc65-6c06-0410-ace0-fbb531ad65f3	13 years ago
Richard Mudgett	0227e00eb3	OneTouchRecord: Make so Monitor/MixMonitor can be toggled/started/stopped. ... The OneTouchRecord feature has historically been a toggle. This patch adds the ability to make the OneTouchRecord hook optionally start/stop recording only. If OneTouchRecord is already doing what is requested then only the invoker hears the courtesy tone and/or start/stop recording message. The new feature is written so we could easily add explicit start/stop recording DTMF hooks for Monitor and MixMonitor. The majority of the changes in bridge_builtin_features.c is a refactoring of the OneTouchRecord code (Monitor and MixMonitor versions) so it is easy to direct the toggle/start/stop functionality. Review: https://reviewboard.asterisk.org/r/2655/ git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@393612 65c4cc65-6c06-0410-ace0-fbb531ad65f3	13 years ago
David M. Lee	a75fd32212	ARI - channel recording support ... This patch is the first step in adding recording support to the Asterisk REST Interface. Recordings are stored in /var/spool/recording. Since recordings may be destructive (overwriting existing files), the API rejects attempts to escape the recording directory (avoiding issues if someone attempts to record to ../../lib/sounds/greeting, for example). (closes issue ASTERISK-21594) (closes issue ASTERISK-21581) Review: https://reviewboard.asterisk.org/r/2612/ git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@393550 65c4cc65-6c06-0410-ace0-fbb531ad65f3	13 years ago
David M. Lee	c4adaf9106	Configuration for Stasis threadpool ... The appropriate settings for the Stasis threadpool is very system specific, depending upon both workload and system configuration. This patch adds a stasis.conf file which can be used to configure the key attributes of the threadpool for the Stasis message bus. (closes issue ASTERISK-21280) Review: https://reviewboard.asterisk.org/r/2651/ git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@393542 65c4cc65-6c06-0410-ace0-fbb531ad65f3	13 years ago
David M. Lee	c9a3d4562d	Update events to use Swagger 1.3 subtyping, and related aftermath ... This patch started with the simple idea of changing the /events data model to be more sane. The original model would send out events like: { "stasis_start": { "args": [], "channel": { ... } } } The event discriminator was the field name instead of being a value in the object, due to limitations in how Swagger 1.1 could model objects. While technically sufficient in communicating event information, it was really difficult to deal with in terms of client side JSON handling. This patch takes advantage of a proposed extension[1] to Swagger which allows type variance through the use of a discriminator field. This had a domino effect that made this a surprisingly large patch. [1]: https://groups.google.com/d/msg/wordnik-api/EC3rGajE0os/ey_5dBI_jWcJ In changing the models, I also had to change the swagger_model.py processor so it can handle the type discriminator and subtyping. I took that a big step forward, and using that information to generate an ari_model module, which can validate a JSON object against the Swagger model. The REST and WebSocket generators were changed to take advantage of the validators. If compiled with AST_DEVMODE enabled, JSON objects that don't match their corresponding models will not be sent out. For REST API calls, a 500 Internal Server response is sent. For WebSockets, the invalid JSON message is replaced with an error message. Since this took over about half of the job of the existing JSON generators, and the .to_json virtual function on messages took over the other half, I reluctantly removed the generators. The validators turned up all sorts of errors and inconsistencies in our data models, and the code. These were cleaned up, with checks in the code generator avoid some of the consistency problems in the future. * The model for a channel snapshot was trimmed down to match the information sent via AMI. Many of the field being sent were not useful in the general case. * The model for a bridge snapshot was updated to be more consistent with the other ARI models. Another impact of introducing subtyping was that the swagger-codegen documentation generator was insufficient (at least until it catches up with Swagger 1.2). I wanted it to be easier to generate docs for the API anyways, so I ported the wiki pages to use the Asterisk Swagger generator. In the process, I was able to clean up many of the model links, which would occasionally give inconsistent results on the wiki. I also added error responses to the wiki docs, making the wiki documentation more complete. Finally, since Stasis-HTTP will now be named Asterisk REST Interface (ARI), any new functions and files I created carry the ari_ prefix. I changed a few stasis_http references to ari where it was non-intrusive and made sense. (closes issue ASTERISK-21885) Review: https://reviewboard.asterisk.org/r/2639/ git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@393529 65c4cc65-6c06-0410-ace0-fbb531ad65f3	13 years ago
David M. Lee	dcf03554a0	Shuffle RESTful URL's around. ... This patch moves the RESTful URL's around to more appropriate locations for release. The /stasis URL's are moved to /ari, since Asterisk REST Interface was a more appropriate name than Stasis-HTTP. (Most of the code still has stasis_http references, but they will be cleaned up after there are no more outstanding branches that would have merge conflicts with such a change). A larger change was moving the ARI events WebSocket off of the shared /ws URL to its permanent home on /ari/events. The Swagger code generator was extended to handle "upgrade: websocket" and "websocketProtocol:" attributes on an operation. The WebSocket module was modified to better handle WebSocket servers that have a single registered protocol handler. If a client connections does not specify the Sec-WebSocket-Protocol header, and the server has a single protocol handler registered, the WebSocket server will go ahead and accept the client for that subprotocol. (closes issue ASTERISK-21857) Review: https://reviewboard.asterisk.org/r/2621/ git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@393528 65c4cc65-6c06-0410-ace0-fbb531ad65f3	13 years ago
Mark Michelson	69242ad317	Remove unused blind transfer publication structure. ... I ended up using a bridge blob, so this structure was unused. Keeping it in the header would just cause confusion. git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@393463 65c4cc65-6c06-0410-ace0-fbb531ad65f3	13 years ago
Kevin Harwell	a25a630659	New SIP Channel driver: Always Auth Reject ... If no matching endpoint is found for the incoming request Asterisk will respond with a 401 Unauthorized (rejecting the request), but will first challenge if no authorization creditials are given. Changes also included moving ACL options into a new global 'security' configuration section in res_sip.conf. (closes issue ASTERISK-21433) Reported by: Matt Jordan Review: https://reviewboard.asterisk.org/r/2554/ git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@393442 65c4cc65-6c06-0410-ace0-fbb531ad65f3	13 years ago
Kinsey Moore	6e3a5d2d48	Add CEL unit tests and do some cleanup ... This adds several unit tests for CEL functionality and provides the requisite framework for creating additional unit tests. This also cleans up some reference leaks that were occurring in Stasis-Core message callback code. Review: https://reviewboard.asterisk.org/r/2646/ git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@393410 65c4cc65-6c06-0410-ace0-fbb531ad65f3	13 years ago
Kevin Harwell	5456794b66	New SIP Channel Driver - Add CLI/AMI initiated NOTIFY requests ... Added the ability to send unsolicited NOTIFY requests to a particular endpoint with a configured payload. Added both CLI and AMI support. For a given endpoint, this module will iterate over all its contacts sending the appropriate NOTIFY request to each. (closes issue ASTERISK-21436) Reported by: Matt Jordan Review: https://reviewboard.asterisk.org/r/2623/ git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@393364 65c4cc65-6c06-0410-ace0-fbb531ad65f3	13 years ago
Matthew Jordan	3841520a6e	Prevent crash during synchronous AMI origination by ref bumping returned channel ... The originate APIs allow callers to provide a pointer to a channel that will point to the originated channel if the function call succeeds. This is used by AMI to provide channel information when the originate is performed synchronously. Unfortunately, if the originate fails in certain ways, the outbound channel is already disposed of during the dialing itself. This results in the channel being improperly dereferenced by the internal originate function in pbx.c. This patch ref bumps the channel to prevent this from occurring. Callers must now unlock and unref the channel (which is more in line with general channel management guidelines anyway). This only affects manager, as it is the only consumer of this API function that actually passes in a channel pointer. Review: https://reviewboard.asterisk.org/r/2617/ git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@393361 65c4cc65-6c06-0410-ace0-fbb531ad65f3	13 years ago
Jason Parker	f820d24db1	ARI: Implement channel hold/unhold. ... This puts the channel on hold (rather than queueing a frame from the channel). (closes issue ASTERISK-21619) Review: https://reviewboard.asterisk.org/r/2647/ git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@393332 65c4cc65-6c06-0410-ace0-fbb531ad65f3	13 years ago
Jason Parker	f41faf0b7d	ARI: Implement channel dial. ... This creates a new outbound channel, and bridges it to a channel already in the Stasis application. (closes issue ASTERISK-21620) Review: https://reviewboard.asterisk.org/r/2634/ git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@393326 65c4cc65-6c06-0410-ace0-fbb531ad65f3	13 years ago