33750 Commits (b47a403b801b82001738f7eccf18f98ca22836d2)

 

All Branches   

Search

Author	SHA1	Message	Date
Naveen Albert	b47a403b80	core_local: Fix local channel parsing with slashes. ... Currently, trying to call a Local channel with a slash in the extension will fail due to the parsing of characters after such a slash as being dial modifiers. Additionally, core_local is inconsistent and incomplete with its parsing of Local dial strings in that sometimes it uses the first slash and at other times it uses the last. For instance, something like DAHDI/5 or PJSIP/device is a perfectly usable extension in the dialplan, but Local channels in particular prevent these from being called. This creates inconsistent behavior for users, since using a slash in an extension is perfectly acceptable, and using a Goto to accomplish this works fine, but if specified through a Local channel, the parsing prevents this. This fixes this by explicitly parsing options from the last slash in the extension, rather than the first one, which doesn't cause an issue for extensions with slashes. ASTERISK-30013 #close Resolves: #248 (cherry picked from commit 2191a0d33f)	2 years ago
Mark Murawski	3b70dfcced	Remove files that are no longer updated ... Fixes: #360 (cherry picked from commit 2ed8daa3cb)	2 years ago
Naveen Albert	b5eb5e19c3	app_voicemail: Add AMI event for mailbox PIN changes. ... This adds an AMI event that is emitted whenever a mailbox password is successfully changed, allowing AMI consumers to process these. UserNote: The VoicemailPasswordChange event is now emitted whenever a mailbox password is updated, containing the mailbox information and the new password. Resolves: #398 (cherry picked from commit cf9d7fa9f6)	2 years ago
Sean Bright	3ded0c95fc	app_queue.c: Emit unpause reason with PauseQueueMember event. ... Fixes #395 (cherry picked from commit fb937d1d89)	2 years ago
George Joseph	e2f246c067	bridge_simple: Suppress unchanged topology change requests ... In simple_bridge_join, we were sending topology change requests even when the new and old topologies were the same. In some circumstances, this can cause unnecessary re-invites and even a re-invite flood. We now suppress those. Resolves: #384 (cherry picked from commit f301d4559e)	2 years ago
Naveen Albert	120dbba2b3	res_pjsip: Include cipher limit in config error message. ... If too many ciphers are specified in the PJSIP config, include the maximum number of ciphers that may be specified in the user-facing error message. Resolves: #396 (cherry picked from commit 8d9d0d3738)	2 years ago
Mike Bradeen	0b4427d621	res_speech: allow speech to translate input channel ... * Allow res_speech to translate the input channel if the format is translatable to a format suppored by the speech provider. Resolves: #129 UserNote: res_speech now supports translation of an input channel to a format supported by the speech provider, provided a translation path is available between the source format and provider capabilites. (cherry picked from commit c3e2bff36e)	2 years ago
Sean Bright	ea74f942ce	res_rtp_asterisk.c: Fix memory leak in ephemeral certificate creation. ... Fixes #386 (cherry picked from commit deeb1acffe)	2 years ago
Sean Bright	58f78d2d0e	res_pjsip_dtmf_info.c: Add 'INFO' to Allow header. ... Fixes #376 (cherry picked from commit d4e4942cf5)	2 years ago
George Joseph	027c748e57	api.wiki.mustache: Fix indentation in generated markdown ... The '*' list indicator for default values and allowable values for path, query and POST parameters need to be indented 4 spaces instead of 2. Should resolve issue 38 in the documentation repo. (cherry picked from commit b619b64137)	2 years ago
Sean Bright	93697458a6	pjsip_configuration.c: Disable DTLS renegotiation if WebRTC is enabled. ... Per RFC8827: Implementations MUST NOT implement DTLS renegotiation and MUST reject it with a "no_renegotiation" alert if offered. So we disable it when webrtc=yes is set. Fixes #378 UpgradeNote: The dtls_rekey will be disabled if webrtc support is requested on an endpoint. A warning will also be emitted. (cherry picked from commit 9d329da346)	2 years ago
Samuel Olaechea	59181860ec	configs: Fix typo in pjsip.conf.sample. ... (cherry picked from commit ebc78a83be)	2 years ago
George Joseph	e52175341e	res_pjsip_exten_state,res_pjsip_mwi: Allow unload on shutdown ... Commit f66f77f last year prevents the res_pjsip_exten_state and res_pjsip_mwi modules from unloading due to possible pjproject asserts if the modules are reloaded. A side effect of the implementation is that the taskprocessors these modules use aren't being released. When asterisk is doing a graceful shutdown, it waits AST_TASKPROCESSOR_SHUTDOWN_MAX_WAIT seconds for all taskprocessors to stop but since those 2 modules don't release theirs, the shutdown hangs for that amount of time. This change allows the modules to be unloaded and their resources to be released when ast_shutdown_final is true. Resolves: #379 (cherry picked from commit 9efc4bdfbc)	2 years ago
sungtae kim	faf046ea86	res_pjsip: Expanding PJSIP endpoint ID and relevant resource length to 255 characters ... This commit introduces an extension to the endpoint and relevant resource sizes for PJSIP, transitioning from its current 40-character constraint to a more versatile 255-character capacity. This enhancement significantly overcomes limitations related to domain qualification and practical usage, ultimately delivering improved functionality. In addition, it includes adjustments to accommodate the expanded realm size within the ARI, specifically enhancing the maximum realm length. Resolves: #345 UserNote: With this update, the PJSIP realm lengths have been extended to support up to 255 characters. UpgradeNote: As part of this update, the maximum allowable length for PJSIP endpoints and relevant resources has been increased from 40 to 255 characters. To take advantage of this enhancement, it is recommended to run the necessary procedures (e.g., Alembic) to update your schemas. (cherry picked from commit f89e56c178)	2 years ago
George Joseph	95656c409d	.github: PRSubmitActions: Fix adding reviewers to PR ... (cherry picked from commit be1e83a6ac)	2 years ago
George Joseph	13f2d126fd	.github: New PR Submit workflows ... The workflows that get triggered when PRs are submitted or updated have been replaced with ones that are more secure and have a higher level of parallelism. (cherry picked from commit 289aa1840e)	2 years ago
George Joseph	2cb140f801	.github: New PR Submit workflows ... The workflows that get triggered when PRs are submitted or updated have been replaced with ones that are more secure and have a higher level of parallelism. (cherry picked from commit 0c1c6e9ada)	2 years ago
Mike Bradeen	0f2eb00a52	res_stasis: signal when new command is queued ... res_statsis's app loop sleeps for up to .2s waiting on input to a channel before re-checking the command queue. This can cause delays between channel setup and bridge. This change is to send a SIGURG on the sleeping thread when a new command is enqueued. This exits the sleeping thread out of the ast_waitfor() call triggering the new command being processed on the channel immediately. Resolves: #362 UserNote: Call setup times should be significantly improved when using ARI. (cherry picked from commit 79220e3f0c)	2 years ago
Holger Hans Peter Freyther	1f7e9bfad5	ari/stasis: Indicate progress before playback on a bridge ... Make it possible to start a playback and the calling party to receive audio on a bridge before the call is connected. Model the implementation after play_on_channel and deliver a AST_CONTROL_PROGRESS before starting the playback. For a PJSIP channel this will result in sending a SIP 183 Session Progress. (cherry picked from commit 1171dcee02)	2 years ago
Sean Bright	d7a01afa50	func_curl.c: Ensure channel is locked when manipulating datastores. ... (cherry picked from commit acb2348f90)	2 years ago
George Joseph	fd487b48a3	.github: Fix job prereqs in PROpenedUpdated ... (cherry picked from commit 20398e8e95)	2 years ago
George Joseph	e1ce35c3f5	.github: Block PR tests until approved ... (cherry picked from commit e9abf11a26)	2 years ago
Joshua C. Colp	b7cc7e804b	Update config.yml ... (cherry picked from commit ef7b0f4c3b)	2 years ago
George Joseph	f0edab9f3e	logger.h: Add ability to change the prefix on SCOPE_TRACE output ... You can now define the _TRACE_PREFIX_ macro to change the default trace line prefix of "file:line function" to something else. Full documentation in logger.h. (cherry picked from commit b52e07ee1b)	2 years ago
George Joseph	393d8cb947	Add libjwt to third-party ... The current STIR/SHAKEN implementation is not currently usable due to encryption issues. Rather than trying to futz with OpenSSL and the the current code, we can take advantage of the existing capabilities of libjwt but we first need to add it to the third-party infrastructure already in place for jansson and pjproject. A few tweaks were also made to the third-party infrastructure as a whole. The jansson "dest" install directory was renamed "dist" to better match convention, and the third-party Makefile was updated to clean all product directories not just the ones currently in use. Resolves: #349 (cherry picked from commit a9d4175e1d)	2 years ago
Mike Bradeen	0df2848147	res_pjsip: update qualify_timeout documentation with DNS note ... The documentation on qualify_timeout does not explicitly state that the timeout includes any time required to perform any needed DNS queries on the endpoint. If the OPTIONS response is delayed due to the DNS query, it can still render an endpoint as Unreachable if the net time is enough for qualify_timeout to expire. Resolves: #352 (cherry picked from commit 933490b758)	2 years ago
Naveen Albert	c06fd10f0a	chan_dahdi: Clarify scope of callgroup/pickupgroup. ... Internally, chan_dahdi only applies callgroup and pickupgroup to FXO signalled channels, but this is not documented anywhere. This is now documented in the sample config, and a warning is emitted if a user tries configuring these settings for channel types that do not support these settings, since they will not have any effect. Resolves: #294 (cherry picked from commit 945babf25c)	2 years ago
Bastian Triller	7a1208410a	func_json: Fix crashes for some types ... This commit fixes crashes in JSON_DECODE() for types null, true, false and real numbers. In addition it ensures that a path is not deeper than 32 levels. Also allow root object to be an array. Add unit tests for above cases. (cherry picked from commit e6d5b8d8cf)	2 years ago
Mike Bradeen	c47a386cf2	res_speech_aeap: add aeap error handling ... res_speech_aeap previously did not register an error handler with aeap, so it was not notified of a disconnect. This resulted in SpeechBackground never exiting upon a websocket disconnect. Resolves: #303 (cherry picked from commit 8c934fb7ed)	2 years ago
Naveen Albert	0a834c8d75	app_voicemail: Disable ADSI if unavailable. ... If ADSI is available on a channel, app_voicemail will repeatedly try to use ADSI, even if there is no CPE that supports it. This leads to many unnecessary delays during the session. If ADSI is available but ADSI setup fails, we now disable it to prevent further attempts to use ADSI during the session. Resolves: #354 (cherry picked from commit c04923fcda)	2 years ago
Eduardo	7a2305a08b	codec_builtin: Use multiples of 20 for maximum_ms ... Some providers require a multiple of 20 for the maxptime or fail to complete calls, e.g. Vivo in Brazil. To increase compatibility, only multiples of 20 are now used. Resolves: #260 (cherry picked from commit 11d87713eb)	2 years ago
George Joseph	9afa54b3b3	lock.c: Separate DETECT_DEADLOCKS from DEBUG_THREADS ... Previously, DETECT_DEADLOCKS depended on DEBUG_THREADS. Unfortunately, DEBUG_THREADS adds a lot of lock tracking overhead to all of the lock lifecycle calls whereas DETECT_DEADLOCKS just causes the lock calls to loop over trylock in 200us intervals until the lock is obtained and spits out log messages if it takes more than 5 seconds. From a code perspective, the only reason they were tied together was for logging. So... The ifdefs in lock.c were refactored to allow DETECT_DEADLOCKS to be enabled without also enabling DEBUG_THREADS. Resolves: #321 UserNote: You no longer need to select DEBUG_THREADS to use DETECT_DEADLOCKS. This removes a significant amount of overhead if you just want to detect possible deadlocks vs needing full lock tracing. (cherry picked from commit 7e2243f9e1)	2 years ago
George Joseph	97674e1d20	asterisk.c: Use the euid's home directory to read/write cli history ... The CLI .asterisk_history file is read from/written to the directory specified by the HOME environment variable. If the root user starts asterisk with the -U/-G options, or with runuser/rungroup set in asterisk.conf, the asterisk process is started as root but then it calls setuid/setgid to set the new user/group. This does NOT reset the HOME environment variable to the new user's home directory though so it's still left as "/root". In this case, the new user will almost certainly NOT have access to read from or write to the history file. * Added function process_histfile() which calls getpwuid(geteuid()) and uses pw->dir as the home directory instead of the HOME environment variable. * ast_el_read_default_histfile() and ast_el_write_default_histfile() have been modified to use the new process_histfile() function. Resolves: #337 (cherry picked from commit 07cf37531a)	2 years ago
Tinet-mucw	a86376fe68	res_pjsip_transport_websocket: Prevent transport from being destroyed before message finishes. ... From the gdb information, ast_websocket_read reads a message successfully, then transport_read is called in the serializer. During execution of pjsip_transport_down, ws_session->stream->fd is closed; ast_websocket_read encounters an error and exits the while loop. After executing transport_shutdown, the transport's reference count becomes 0, causing a crash when sending SIP messages. This was due to pjsip_transport_dec_ref executing earlier than pjsip_rx_data_clone, leading to this issue. In websocket_cb executeing pjsip_transport_add_ref, this we now ensure the transport is not destroyed while in the loop. Resolves: asterisk#299 (cherry picked from commit edc674a6ca)	2 years ago
Mike Bradeen	3b61583c20	cel: add publish user event helper ... Add a wrapper function around ast_cel_publish_event that packs event and extras into a blob before publishing Resolves:#330 (cherry picked from commit 248b92563c)	2 years ago
Naveen Albert	3fef46e776	chan_console: Fix deadlock caused by unclean thread exit. ... To terminate a console channel, stop_stream causes pthread_cancel to make stream_monitor exit. However, commit 5b8fea93d1 added locking to this function which results in deadlock due to the stream_monitor thread being killed while it's holding the pvt lock. To resolve this, a flag is now set and read to indicate abort, so the use of pthread_cancel and pthread_kill can be avoided altogether. Resolves: #308 (cherry picked from commit 71215561d8)	2 years ago
George Joseph	d5a285c8f2	file.c: Add ability to search custom dir for sounds ... To better co-exist with sounds files that may be managed by packages, custom sound files may now be placed in AST_DATA_DIR/sounds/custom instead of the standard AST_DATA_DIR/sounds/<lang> directory. If the new "sounds_search_custom_dir" option in asterisk.conf is set to "true", asterisk will search the custom directory for sounds files before searching the standard directory. For performance reasons, the "sounds_search_custom_dir" defaults to "false". Resolves: #315 UserNote: A new option "sounds_search_custom_dir" has been added to asterisk.conf that allows asterisk to search AST_DATA_DIR/sounds/custom for sounds files before searching the standard AST_DATA_DIR/sounds/<lang> directory. (cherry picked from commit 4493d2b2fc)	2 years ago
Naveen Albert	accedd4c3e	chan_iax2: Improve authentication debugging. ... Improves and adds some logging to make it easier for users to debug authentication issues. Resolves: #286 (cherry picked from commit 833ee80789)	2 years ago
Vitezslav Novy	c275ee9e54	res_rtp_asterisk: fix wrong counter management in ioqueue objects ... In function rtp_ioqueue_thread_remove counter in ioqueue object is not decreased which prevents unused ICE TURN threads from being removed. Resolves: #301 (cherry picked from commit 5179f1af24)	2 years ago
George Joseph	172602d30e	make_buildopts_h, et. al. Allow adding all cflags to buildopts.h ... The previous behavior of make_buildopts_h was to not add the non-ABI-breaking MENUSELECT_CFLAGS like DETECT_DEADLOCKS, REF_DEBUG, etc. to the buildopts.h file because "it caused ccache to invalidate files and extended compile times". They're only defined by passing them on the gcc command line with '-D' options. In practice, including them in the include file rarely causes any impact because the only time ccache cares is if you actually change an option so the hit occurrs only once after you change it. OK so why would we want to include them? Many IDEs follow the include files to resolve defines and if the options aren't in an include file, it can cause the IDE to mark blocks of "ifdeffed" code as unused when they're really not. So... * Added a new menuselect compile option ADD_CFLAGS_TO_BUILDOPTS_H which tells make_buildopts_h to include the non-ABI-breaking flags in buildopts.h as well as the ABI-breaking ones. The default is disabled to preserve current behavior. As before though, only the ABI-breaking flags appear in AST_BUILDOPTS and only those are used to calculate AST_BUILDOPT_SUM. A new AST_BUILDOPT_ALL define was created to capture all of the flags. * make_version_c was streamlined to use buildopts.h and also to create asterisk_build_opts_all[] and ast_get_build_opts_all(void) * "core show settings" now shows both AST_BUILDOPTS and AST_BUILDOPTS_ALL. UserNote: The "Build Options" entry in the "core show settings" CLI command has been renamed to "ABI related Build Options" and a new entry named "All Build Options" has been added that shows both breaking and non-breaking options. (cherry picked from commit 06da7b342e)	2 years ago
Mike Bradeen	58a37523dd	func_periodic_hook: Add hangup step to avoid timeout ... func_periodic_hook does not hangup after playback, relying on hangup which keeps the channel alive longer than necessary. Resolves: #325 (cherry picked from commit dd817c2708)	2 years ago
Sean Bright	d9dc7b66e4	res_stasis_recording.c: Save recording state when unmuted. ... Fixes #322 (cherry picked from commit 3fafd7c0b7)	2 years ago
Mike Bradeen	b68370ba9c	res_speech_aeap: check for null format on response ... * Fixed issue in res_speech_aeap when unable to provide an input format to check against. (cherry picked from commit b53e946b59)	2 years ago
George Joseph	9ee35c259a	func_periodic_hook: Don't truncate channel name ... func_periodic_hook was truncating long channel names which causes issues when you need to run other dialplan functions/apps on the channel. Resolves: #319 (cherry picked from commit 9e2433f73f)	2 years ago
George Joseph	52929efb83	safe_asterisk: Change directory permissions to 755 ... If the safe_asterisk script detects that the /var/lib/asterisk directory doesn't exist, it now creates it with 755 permissions instead of 770. safe_asterisk needing to create that directory should be extremely rare though because it's normally created by 'make install' which already sets the permissions to 755. Resolves: #316 (cherry picked from commit c929146c61)	2 years ago
Maximilian Fridrich	38598701da	chan_rtp: Implement RTP glue for UnicastRTP channels ... Resolves: #298 UserNote: The dial string option 'g' was added to the UnicastRTP channel which enables RTP glue and therefore native RTP bridges with those channels. (cherry picked from commit 98ffcfebda)	2 years ago
Jaco Kroon	bc72c76891	app_queue: periodic announcement configurable start time. ... This newly introduced periodic-announce-startdelay makes it possible to configure the initial start delay of the first periodic announcement after which periodic-announce-frequency takes over. UserNote: Introduce a new queue configuration option called 'periodic-announce-startdelay' which will vary the normal (historic) behavior of starting the periodic announcement cycle at periodic-announce-frequency seconds after entering the queue to start the periodic announcement cycle at period-announce-startdelay seconds after joining the queue. The default behavior if this config option is not set remains unchanged. Signed-off-by: Jaco Kroon <jaco@uls.co.za> (cherry picked from commit a4cb63e231)	2 years ago
Joshua C. Colp	6521066fbe	variables: Add additional variable dialplan functions. ... Using the Set dialplan application does not actually delete channel or global variables. Instead the variables are set to an empty value. This change adds two dialplan functions, GLOBAL_DELETE and DELETE which can be used to delete global and channel variables instead of just setting them to empty. There is also no ability within the dialplan to determine if a global or channel variable has actually been set or not. This change also adds two dialplan functions, GLOBAL_EXISTS and VARIABLE_EXISTS which can be used to determine if a global or channel variable has been set or not. Resolves: #289 UserNote: Four new dialplan functions have been added. GLOBAL_DELETE and DELETE have been added which allows the deletion of global and channel variables. GLOBAL_EXISTS and VARIABLE_EXISTS have been added which checks whether a global or channel variable has been set. (cherry picked from commit abe4f62554)	2 years ago
George Joseph	c2d3ad489d	Restore CHANGES and UPGRADE.txt to allow cherry-picks to work	2 years ago
Asterisk Development Team	4988f9131f	Update for 20.5.2	2 years ago