1652 Commits (addbf276f5037dc5a265a1e43e383ae1d9e9d0d8)

Author	SHA1	Message	Date
Jonathan Rose	8fbe62f5df	configuration samples: Pull all parking related stuff out of features.conf ... This patch also adds documentation for parking from features.conf to res_parking.conf ........ Merged revisions 400205 from http://svn.asterisk.org/svn/asterisk/branches/12 git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@400206 65c4cc65-6c06-0410-ace0-fbb531ad65f3	12 years ago
David M. Lee	2de42c2a25	Multiple revisions 399887,400138,400178,400180-400181 ... ........ r399887 | dlee | 2013-09-26 10:41:47 -0500 (Thu, 26 Sep 2013) | 1 line Minor performance bump by not allocate manager variable struct if we don't need it ........ r400138 | dlee | 2013-09-30 10:24:00 -0500 (Mon, 30 Sep 2013) | 23 lines Stasis performance improvements This patch addresses several performance problems that were found in the initial performance testing of Asterisk 12. The Stasis dispatch object was allocated as an AO2 object, even though it has a very confined lifecycle. This was replaced with a straight ast_malloc(). The Stasis message router was spending an inordinate amount of time searching hash tables. In this case, most of our routers had 6 or fewer routes in them to begin with. This was replaced with an array that's searched linearly for the route. We more heavily rely on AO2 objects in Asterisk 12, and the memset() in ao2_ref() actually became noticeable on the profile. This was #ifdef'ed to only run when AO2_DEBUG was enabled. After being misled by an erroneous comment in taskprocessor.c during profiling, the wrong comment was removed. Review: https://reviewboard.asterisk.org/r/2873/ ........ r400178 | dlee | 2013-09-30 13:26:27 -0500 (Mon, 30 Sep 2013) | 24 lines Taskprocessor optimization; switch Stasis to use taskprocessors This patch optimizes taskprocessor to use a semaphore for signaling, which the OS can do a better job at managing contention and waiting that we can with a mutex and condition. The taskprocessor execution was also slightly optimized to reduce the number of locks taken. The only observable difference in the taskprocessor implementation is that when the final reference to the taskprocessor goes away, it will execute all tasks to completion instead of discarding the unexecuted tasks. For systems where unnamed semaphores are not supported, a really simple semaphore implementation is provided. (Which gives identical performance as the original taskprocessor implementation). The way we ended up implementing Stasis caused the threadpool to be a burden instead of a boost to performance. This was switched to just use taskprocessors directly for subscriptions. Review: https://reviewboard.asterisk.org/r/2881/ ........ r400180 | dlee | 2013-09-30 13:39:34 -0500 (Mon, 30 Sep 2013) | 28 lines Optimize how Stasis forwards are dispatched This patch optimizes how forwards are dispatched in Stasis. Originally, forwards were dispatched as subscriptions that are invoked on the publishing thread. This did not account for the vast number of forwards we would end up having in the system, and the amount of work it would take to walk though the forward subscriptions. This patch modifies Stasis so that rather than walking the tree of forwards on every dispatch, when forwards and subscriptions are changed, the subscriber list for every topic in the tree is changed. This has a couple of benefits. First, this reduces the workload of dispatching messages. It also reduces contention when dispatching to different topics that happen to forward to the same aggregation topic (as happens with all of the channel, bridge and endpoint topics). Since forwards are no longer subscriptions, the bulk of this patch is simply changing stasis_subscription objects to stasis_forward objects (which, admittedly, I should have done in the first place.) Since this required me to yet again put in a growing array, I finally abstracted that out into a set of ast_vector macros in asterisk/vector.h. Review: https://reviewboard.asterisk.org/r/2883/ ........ r400181 | dlee | 2013-09-30 13:48:57 -0500 (Mon, 30 Sep 2013) | 28 lines Remove dispatch object allocation from Stasis publishing While looking for areas for performance improvement, I realized that an unused feature in Stasis was negatively impacting performance. When a message is sent to a subscriber, a dispatch object is allocated for the dispatch, containing the topic the message was published to, the subscriber the message is being sent to, and the message itself. The topic is actually unused by any subscriber in Asterisk today. And the subscriber is associated with the taskprocessor the message is being dispatched to. First, this patch removes the unused topic parameter from Stasis subscription callbacks. Second, this patch introduces the concept of taskprocessor local data, data that may be set on a taskprocessor and provided along with the data pointer when a task is pushed using the ast_taskprocessor_push_local() call. This allows the task to have both data specific to that taskprocessor, in addition to data specific to that invocation. With those two changes, the dispatch object can be removed completely, and the message is simply refcounted and sent directly to the taskprocessor. Review: https://reviewboard.asterisk.org/r/2884/ ........ Merged revisions 399887,400138,400178,400180-400181 from http://svn.asterisk.org/svn/asterisk/branches/12 git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@400186 65c4cc65-6c06-0410-ace0-fbb531ad65f3	12 years ago
Kinsey Moore	b44ce141e5	chan_sip: Allow Asterisk to retry after 403 on register ... This adds a global option in chan_sip to allow it to continue attempting registration if a 403 is received, clearing the cached nonce and treating it as a non-fatal response. Normally, this would cause registration attempts to that endpoint to stop. This also adds a similar per-outbound-registration option to chan_pjsip which allows the retry interval to be altered for 403 responses to REGISTER requests. (closes issue ASTERISK-17138) Review: https://reviewboard.asterisk.org/r/2874/ Reported by: Rudi ........ Merged revisions 400137 from http://svn.asterisk.org/svn/asterisk/branches/1.8 ........ Merged revisions 400140 from http://svn.asterisk.org/svn/asterisk/branches/11 ........ Merged revisions 400141 from http://svn.asterisk.org/svn/asterisk/branches/12 git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@400142 65c4cc65-6c06-0410-ace0-fbb531ad65f3	12 years ago
Matthew Jordan	a1d56da32a	res_pjsip_notify: Add documentation ... We forgot to add documentation for res_pjsip_notify, which would prevent it from being loaded. Whoops. This patch also updates res_pjsip_notify to use pjsip_notify.conf, which now has its own sample file in the configs directory as well. Review: https://reviewboard.asterisk.org/r/2835/ ........ Merged revisions 400121 from http://svn.asterisk.org/svn/asterisk/branches/12 git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@400122 65c4cc65-6c06-0410-ace0-fbb531ad65f3	12 years ago
Sean Bright	89b8ff5d78	Remove some trailing whitespace and steal revision 400000. ... git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@400000 65c4cc65-6c06-0410-ace0-fbb531ad65f3	12 years ago
Rusty Newton	7c346a31ef	Documentation fix - waitfordialtone is not boolean, it's time in milliseconds ... Changing text in chan_dahdi.conf sample to be accurate. (issue ASTERISK-22308) (closes issue ASTERISK-22308) Reported By: Malcolm Davenport ........ Merged revisions 398880 from http://svn.asterisk.org/svn/asterisk/branches/1.8 ........ Merged revisions 398881 from http://svn.asterisk.org/svn/asterisk/branches/11 ........ Merged revisions 398882 from http://svn.asterisk.org/svn/asterisk/branches/12 git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@398883 65c4cc65-6c06-0410-ace0-fbb531ad65f3	12 years ago
Russell Bryant	9b3e0b095e	Fix typo in confbridge.conf.sample ... The denoise filter requires func_speex, not codec_speex. Fix this in the description of the denoise=yes option in confbridge.conf. ........ Merged revisions 398820 from http://svn.asterisk.org/svn/asterisk/branches/11 ........ Merged revisions 398821 from http://svn.asterisk.org/svn/asterisk/branches/12 git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@398822 65c4cc65-6c06-0410-ace0-fbb531ad65f3	12 years ago
Rusty Newton	be219c9ec9	New pjsip.conf.sample ... (issue ASTERISK-22145) (closes issue ASTERISK-22145) Reported By: Matt Jordan Review: https://reviewboard.asterisk.org/r/2811/ ........ Merged revisions 398147 from http://svn.asterisk.org/svn/asterisk/branches/12 git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@398148 65c4cc65-6c06-0410-ace0-fbb531ad65f3	12 years ago
Matthew Jordan	449afdd9e8	Revert r394939 due to (numerous) objections ... The patch from ASTERISK-21965 was committed perhaps a bit too hastily. Walter and Tzafrir have pointed out numerous issues with the approach and have propsed an alternative in r/2757. Since it's not a time critical issue and is not worth holding up the release of 12 for it, I've gone ahead and reverted r394939 from 12/trunk and re-opened ASTERISK-21965. ........ Merged revisions 397938 from http://svn.asterisk.org/svn/asterisk/branches/12 git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@397939 65c4cc65-6c06-0410-ace0-fbb531ad65f3	12 years ago
Kinsey Moore	d12c79f78f	Update CEL sample config ... git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@397514 65c4cc65-6c06-0410-ace0-fbb531ad65f3	12 years ago
Walter Doekes	33ec719645	Add "autoframing" option to sip.conf.sample and h323.conf.sample. ... The autoframing option was added to chan_sip.c in r43243 (mogorman, 2006-09-19 01:32:57), but never made its way into the sample configs. Review: https://reviewboard.asterisk.org/r/2768/ ........ Merged revisions 396994 from http://svn.asterisk.org/svn/asterisk/branches/1.8 ........ Merged revisions 396995 from http://svn.asterisk.org/svn/asterisk/branches/11 git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@396996 65c4cc65-6c06-0410-ace0-fbb531ad65f3	12 years ago
Richard Mudgett	0c44ee3be3	Update features.conf.sample atxferdropcall option. ... git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@396793 65c4cc65-6c06-0410-ace0-fbb531ad65f3	12 years ago
Kinsey Moore	f6c7e6355e	Fix remnants of the pjsip renaming ... git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@395851 65c4cc65-6c06-0410-ace0-fbb531ad65f3	12 years ago
Mark Michelson	735b30ad71	The large GULP->PJSIP renaming effort. ... The general gist is to have a clear boundary between old SIP stuff and new SIP stuff by having the word "SIP" for old stuff and "PJSIP" for new stuff. Here's a brief rundown of the changes: * The word "Gulp" in dialstrings, functions, and CLI commands is now "PJSIP" * chan_gulp.c is now chan_pjsip.c * Function names in chan_gulp.c that were "gulp_*" are now "chan_pjsip_*" * All files that were "res_sip*" are now "res_pjsip*" * The "res_sip" directory is now "res_pjsip" * Files in the "res_pjsip" directory that began with "sip_*" are now "pjsip_*" * The configuration file is now "pjsip.conf" instead of "res_sip.conf" * The module info for all PJSIP-related files now uses "PJSIP" instead of "SIP" * CLI and AMI commands created by Asterisk's PJSIP modules now have "pjsip" as the starting word instead of "sip" git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@395764 65c4cc65-6c06-0410-ace0-fbb531ad65f3	12 years ago
Kinsey Moore	d8956f690e	Rename everything Stasis-HTTP to ARI ... This renames all files and API calls from several variants of Stasis-HTTP to ARI including: * Stasis-HTTP -> ARI * STASIS_HTTP -> ARI * stasis_http -> ari (ast_ari for global symbols, file names as well) * stasis http -> ARI Review: https://reviewboard.asterisk.org/r/2706/ (closes issue ASTERISK-22136) git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@395603 65c4cc65-6c06-0410-ace0-fbb531ad65f3	12 years ago
Matthew Jordan	bb955e37fb	Provide proper ring tone in indications.conf for Malaysia ... The ring tone provided in the sample indications.conf was incorrect. This patch modifies the sample ring tone to be what it should: ring = 425/400,0/200,425/400,0/2000 This brings it in line with the tone definition in DAHDI 2.7.0. (zonedata.c) (closes issue ASTERISK-21997) Reported by: Filip Jenicek patches: malaysia_ring.patch uploaded by phill (License 6277) ........ Merged revisions 394940 from http://svn.asterisk.org/svn/asterisk/branches/1.8 ........ Merged revisions 394941 from http://svn.asterisk.org/svn/asterisk/branches/11 git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@394942 65c4cc65-6c06-0410-ace0-fbb531ad65f3	12 years ago
Matthew Jordan	54803338b4	Always install safe_asterisk; add configuration file support ... This patch modifies the behavior of safe_asterisk in two ways: (1) It modifies the Asterisk Makefile such that safe_asterisk is always installed on a 'make install'. This was done as bugfixes in the safe_asterisk script were not applied in previous version of Asterisk without first removing the old version of the script. (2) In order to keep a newly installed version of safe_asterisk from impacting local modifications, a new config file - safe_asterisk.conf.sample - has been provided. Settings that were previously modified in safe_asterisk can be set there instead. (closes issue ASTERISK-21965) Reported by: Jeremy Kister patches: safe_asterisk.patch uploaded by jkister (License 6232) git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@394939 65c4cc65-6c06-0410-ace0-fbb531ad65f3	12 years ago
Matthew Jordan	75e83bdbab	Document connectedline parameter for chan_iax2 ... The connectedline parameter for a chan_iax2 peer was undocumented. This patch documents the options in the sample configuration file. (closes issue ASTERISK-21953) Reported by: Birger "WIMPy" Harzenetter ........ Merged revisions 394886 from http://svn.asterisk.org/svn/asterisk/branches/1.8 ........ Merged revisions 394890 from http://svn.asterisk.org/svn/asterisk/branches/11 git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@394894 65c4cc65-6c06-0410-ace0-fbb531ad65f3	12 years ago
Richard Mudgett	d43b17a872	Replace chan_agent with app_agent_pool. ... The ill conceived chan_agent is no more. It is now replaced by app_agent_pool. Agents login using the AgentLogin() application as before. The AgentLogin() application no longer does any authentication. Authentication is now the responsibility of the dialplan. (Besides, the authentication done by chan_agent did not match what the voice prompts asked for.) Sample extensions.conf [login] ; Sample agent 1001 login ; Set COLP for in between calls so the agent does not see the last caller COLP. exten => 1001,1,Set(CONNECTEDLINE(all)="Agent Waiting" <1001>) ; Give the agent DTMF transfer and disconnect features when connected to a caller. same => n,Set(CHANNEL(dtmf-features)=TX) same => n,AgentLogin(1001) same => n,NoOp(AGENT_STATUS is ${AGENT_STATUS}) same => n,Hangup() [caller] ; Sample caller direct connect to agent 1001 exten => 800,1,AgentRequest(1001) same => n,NoOp(AGENT_STATUS is ${AGENT_STATUS}) same => n,Hangup() ; Sample caller going through a Queue to agent 1001 exten => 900,1,Queue(agent_q) same => n,Hangup() Sample queues.conf [agent_q] member => Local/800@caller,,SuperAgent,Agent:1001 Under the hood operation overview: 1) Logged in agents wait for callers in an agents holding bridge. 2) Caller requests an agent using AgentRequest() 3) A basic bridge is created, the agent is notified, and caller joins the basic bridge to wait for the agent. 4) The agent is either automatically connected to the caller or must ack the call to connect. 5) The agent is moved from the agents holding bridge to the basic bridge. 6) The agent and caller talk. 7) The connection is ended by either party. 8) The agent goes back to the agents holding bridge. To avoid some locking issues with the agent holding bridge, I needed to make some changes to the after bridge callback support. The after bridge callback is now a list of requested callbacks with the last to be added the only active callback. The after bridge callback for failed callbacks will always happen in the channel thread when the channel leaves the bridging system or is destroyed. (closes issue ASTERISK-21554) Reported by: Matt Jordan Review: https://reviewboard.asterisk.org/r/2657/ git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@394417 65c4cc65-6c06-0410-ace0-fbb531ad65f3	12 years ago
David M. Lee	684481b74c	Change ARI user config to use a type field ... When I initially wrote the configuration support for ARI users, I determined the section type by a category prefix (i.e., [user-admin]). This is neither idiomatic Asterisk configuration, nor is it really that user friendly. This patch replaces the category prefix with a type field in the section, which is much cleaner. Review: https://reviewboard.asterisk.org/r/2664/ git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@394076 65c4cc65-6c06-0410-ace0-fbb531ad65f3	12 years ago
Russell Bryant	0bfe2d4cc4	astobj2-ify the SLA code ... The SLA code within app_meetme was written before asotbj2 had been merged into Asterisk. Worse, support for reloads did not exist at first and was added later as a bolt-on feature. I knew at the time that reloading was not safe at all while SLA was in use, so the reload would be queued up to execute when the system was idle. Unfortunately, this approach was still prone to errors beyond the fact that this was the only place in Asterisk where configuration was not reloaded instantly when requested. This patch converts various SLA objects to be reference counted objects using astobj2. This allows reloads to be processed while the system is in use. The code ensures that the objects will not disappear while one of the other threads is using them. However, they will be immediately removed from the global trunk and station containers so no new calls will use them if removed from configuration. Review: https://reviewboard.asterisk.org/r/2581/ ........ Merged revisions 393928 from http://svn.asterisk.org/svn/asterisk/branches/1.8 ........ Merged revisions 393929 from http://svn.asterisk.org/svn/asterisk/branches/11 git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@393930 65c4cc65-6c06-0410-ace0-fbb531ad65f3	12 years ago
Richard Mudgett	02f55a36a0	Revert accidental overcommit. ... git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@393632 65c4cc65-6c06-0410-ace0-fbb531ad65f3	12 years ago
Richard Mudgett	b4e9a3fc2f	Add BUGBUG note for ASTERISK-22009 ... git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@393631 65c4cc65-6c06-0410-ace0-fbb531ad65f3	12 years ago
David M. Lee	c4adaf9106	Configuration for Stasis threadpool ... The appropriate settings for the Stasis threadpool is very system specific, depending upon both workload and system configuration. This patch adds a stasis.conf file which can be used to configure the key attributes of the threadpool for the Stasis message bus. (closes issue ASTERISK-21280) Review: https://reviewboard.asterisk.org/r/2651/ git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@393542 65c4cc65-6c06-0410-ace0-fbb531ad65f3	12 years ago
David M. Lee	9ba976b19c	ARI authentication. ... This patch adds authentication support to ARI. Two authentication methods are supported. The first is HTTP Basic authentication, as specified in RFC 2617[1]. The second is by simply passing the username and password as an ?api_key query parameter (which allows swagger-ui[2] to authenticate more easily). ARI usernames and passwords are configured in the ari.conf file (formerly known as stasis_http.conf). The user may be set to `read_only`, which will prohibit the user from issuing POST, DELETE, etc. Also, the user's password may be specified in either plaintext, or encrypted using the crypt() function. Several other notes about the patch. * A few command line commands for seeing ARI config and status were also added. * The configuration parsing grew big enough that I extracted it to its own file. [1]: http://www.ietf.org/rfc/rfc2617.txt [2]: https://github.com/wordnik/swagger-ui (closes issue ASTERISK-21277) Review: https://reviewboard.asterisk.org/r/2649/ git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@393530 65c4cc65-6c06-0410-ace0-fbb531ad65f3	12 years ago
Jonathan Rose	f306dbd841	bridge_features: Support One touch Monitor/MixMonitor ... In addition to porting those features, they now enjoy greater feature parity with one another. Specifically, AutoMixMon now has a start and stop message that can be specified with TOUCH_MIXMONITOR_MESSAGE_START and TOUCH_MIXMONITOR_MESSAGE_STOP. (closes issue ASTERISK-21553) Reported by: Matt Jordan Review: https://reviewboard.asterisk.org/r/2620/ git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@393309 65c4cc65-6c06-0410-ace0-fbb531ad65f3	13 years ago
Kinsey Moore	909ee4bfb9	Refactor extraneous channel events ... This change removes JitterBufStats, ChannelReload, and ChannelUpdate and refactors the following events to travel over Stasis-Core: * LocalBridge * DAHDIChannel * AlarmClear * SpanAlarmClear * Alarm * SpanAlarm * DNDState * MCID * SIPQualifyPeerDone * SessionTimeout Review: https://reviewboard.asterisk.org/r/2627/ (closes issue ASTERISK-21476) git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@393284 65c4cc65-6c06-0410-ace0-fbb531ad65f3	13 years ago
Joshua Colp	77002bc377	Merge in current pimp_my_sip work, including: ... 1. Security events 2. Websocket support 3. Diversion header + redirecting support 4. An anonymous endpoint identifier 5. Inbound extension state subscription support 6. PIDF notify generation 7. One touch recording support (special thanks Sean Bright!) 8. Blind and attended transfer support 9. Automatic inbound registration expiration 10. SRTP support 11. Media offer control dialplan function 12. Connected line support 13. SendText() support 14. Qualify support 15. Inband DTMF detection 16. Call and pickup groups 17. Messaging support Thanks everyone! Side note: I'm reminded of the song "How Far We've Come" by Matchbox Twenty. git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@392565 65c4cc65-6c06-0410-ace0-fbb531ad65f3	13 years ago
Matthew Jordan	c2e29abcbf	Add announce-to-first-user option for app_queue ... In r386792, the ability to play prompts to the first caller in a call queue was added. While this is arguably a bug fix for those who expect the first caller to continue receiving prompts while the agent is dialed, it has the side effect of preventing the first caller from hearing the agent immediately upon bridging. This may not be a problem for those who really want this option, but for those who didn't care whether or not the first caller in queue heard their position, it was an issue. This patch disables the ability for the first caller in the queue to hear prompts and adds a new option, announce-to-first-user, to queues.conf. Those who the behavior can enable it by setting this value to True. Note that if we ever implement the ability to have the prompts be stopped upon bridging, this option can be removed. (closes issue ASTERISK-21782) Reported by: Remi Quezada ........ Merged revisions 391215 from http://svn.asterisk.org/svn/asterisk/branches/1.8 ........ Merged revisions 391241 from http://svn.asterisk.org/svn/asterisk/branches/11 git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@391245 65c4cc65-6c06-0410-ace0-fbb531ad65f3	13 years ago
Jason Parker	a2d02edca5	Make app_queue AMI events more consistent. Give Join/Leave more useful names. ... This also removes the eventwhencalled and eventmemberstatus configuration options. These events can just be filtered via manager.conf blacklists. (closes issue ASTERISK-21469) Review: https://reviewboard.asterisk.org/r/2586/ git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@390901 65c4cc65-6c06-0410-ace0-fbb531ad65f3	13 years ago
Richard Mudgett	bad8caa8c6	Reimplement bridging and DTMF features related channel variables in the bridging core. ... * The channel variable ATTENDED_TRANSFER_COMPLETE_SOUND is no longer channel driver specific. If the channel variable is set on the transferrer channel, the sound will be played to the target of an attended transfer. * The channel variable BRIDGEPEER becomes a comma separated list of peers in a multi-party bridge. The BRIDGEPEER value can have a maximum of 10 peers listed. Any more peers in the bridge will not be included in the list. BRIDGEPEER is not valid in holding bridges like parking since those channels do not talk to each other even though they are in a bridge. * The channel variable BRIDGEPVTCALLID is only valid for two party bridges and will contain a value if the BRIDGEPEER's channel driver supports it. * The channel variable DYNAMIC_PEERNAME is redundant with BRIDGEPEER and is removed. The more useful DYNAMIC_WHO_ACTIVATED gives the channel name that activated the dynamic feature. * The channel variables DYNAMIC_FEATURENAME and DYNAMIC_WHO_ACTIVATED are set only on the channel executing the dynamic feature. Executing a dynamic feature on the bridge peer in a multi-party bridge will execute it on all peers of the activating channel. (closes issue ASTERISK-21555) Reported by: Matt Jordan Review: https://reviewboard.asterisk.org/r/2582/ git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@390771 65c4cc65-6c06-0410-ace0-fbb531ad65f3	13 years ago
Richard Mudgett	3d63833bd6	Merge in the bridge_construction branch to make the system use the Bridging API. ... Breaks many things until they can be reworked. A partial list: chan_agent chan_dahdi, chan_misdn, chan_iax2 native bridging app_queue COLP updates DTMF attended transfers Protocol attended transfers git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@389378 65c4cc65-6c06-0410-ace0-fbb531ad65f3	13 years ago
Damien Wedhorn	01d6e8dbc9	Add call forward no answer to skinny and cleanup general callfwd handling. ... CallforwardNoAnswer uses a sched to determine when to forward the call. Defaults to 20secs but configurable in skinny.conf. Adds dialType to each subchannel structure to be used to differentiate between normal dials that result in a call being placed (default) and other uses for the skinny_dialer (such as cfwd digit collection). Restructured all cfwd handling to use this new arrangement. (closes issue ASTERISK-21292) Reported by: wedhorn Tested by: myself Patches: skinny-callfwdnoans03.diff uploaded by wedhorn (license 5019) git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@389097 65c4cc65-6c06-0410-ace0-fbb531ad65f3	13 years ago
David M. Lee	946eb5ede0	Example of how to use the Stasis message bus ... In order to get people familiar with the Stasis message bus, it would be useful to have something of a tutorial. Since I'm not clever enough to think of some cool integration we could do with Twitter, I settled for something that might actually be useful. This patch adds a res_statsd.so module, which implements a basic statsd[1] client. Statsd is a very simple statistics gathering server, which can publish its results to a backend graphing engine, like Graphite[2]. There are several different Statsd server implementations[3], so you can pick what works best for your environment. The actual example of how to use the Stasis message bus is in res_chan_stats.so. This module demonstrates how to use subscriptions and the message router by monitoring messages and posting channels stats to the statsd server. A wiki page walking through res_chan_stats.so is forthcoming. [1]: https://github.com/etsy/statsd/ [2]: http://graphite.readthedocs.org/en/latest/ [3]: http://joemiller.me/2011/09/21/list-of-statsd-server-implementations/ Review: https://reviewboard.asterisk.org/r/2460/ git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@386624 65c4cc65-6c06-0410-ace0-fbb531ad65f3	13 years ago
Joshua Colp	8c1f423cf7	Don't bind to anything in the sample configuration so we don't clash with chan_sip on a "make samples" right now. ... git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@386577 65c4cc65-6c06-0410-ace0-fbb531ad65f3	13 years ago
Mark Michelson	74f2318051	Merge the pimp_my_sip branch into trunk. ... The pimp_my_sip branch is being merged at this point because it offers basic functionality, and from an API standpoint, things are complete. SIP work is *not* feature-complete; however, with the completion of the SUBSCRIBE/NOTIFY API, all APIs (except a PUBLISH API) have been created, and thus it is possible for developers to attempt to create new SIP work. API documentation can be found in the doxygen in the code, but usability documentation is still lacking. git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@386540 65c4cc65-6c06-0410-ace0-fbb531ad65f3	13 years ago
David M. Lee	1c21b8575b	This patch adds a RESTful HTTP interface to Asterisk. ... The API itself is documented using Swagger, a lightweight mechanism for documenting RESTful API's using JSON. This allows us to use swagger-ui to provide executable documentation for the API, generate client bindings in different languages, and generate a lot of the boilerplate code for implementing the RESTful bindings. The API docs live in the rest-api/ directory. The RESTful bindings are generated from the Swagger API docs using a set of Mustache templates. The code generator is written in Python, and uses Pystache. Pystache has no dependencies, and be installed easily using pip. Code generation code lives in rest-api-templates/. The generated code reduces a lot of boilerplate when it comes to handling HTTP requests. It also helps us have greater consistency in the REST API. (closes issue ASTERISK-20891) Review: https://reviewboard.asterisk.org/r/2376/ git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@386232 65c4cc65-6c06-0410-ace0-fbb531ad65f3	13 years ago
Richard Mudgett	13e2aae2ef	Fix 'pri intense debug span' alias. ... ........ Merged revisions 385313 from http://svn.asterisk.org/svn/asterisk/branches/11 git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@385314 65c4cc65-6c06-0410-ace0-fbb531ad65f3	13 years ago
Rusty Newton	98f2318559	Modified the list of keys for the driver backends for sake of sample clarity ... Added a line showing the mapping of "mysql" to res_config_mysql available in add-ons. We used "mysql" as an example driver key in the sample, but didn't show what module it mapped too. Also added a subtitle above the list of keys for driver backends. ........ Merged revisions 385047 from http://svn.asterisk.org/svn/asterisk/branches/1.8 ........ Merged revisions 385048 from http://svn.asterisk.org/svn/asterisk/branches/11 git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@385049 65c4cc65-6c06-0410-ace0-fbb531ad65f3	13 years ago
Richard Mudgett	6a25d49296	chan_dahdi: Change inband_on_proceeding option default to no/disabled. ... (issue ASTERISK-21151) git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@384711 65c4cc65-6c06-0410-ace0-fbb531ad65f3	13 years ago
Richard Mudgett	79818112fd	chan_dahdi: Add inband_on_proceeding compatibility option. ... The new inband_on_proceeding option causes Asterisk to assume inband audio may be present when a PROCEEDING message is received. Q.931 Section 5.1.2 says the network cannot assume that the CPE side has attached to the B channel at this time without explicitly sending the progress indicator ie informing the CPE side to attach to the B channel for audio. However, some non-compliant ISDN switches send a PROCEEDING without the progress indicator ie indicating inband audio is available and assume that the CPE device has connected the media path for listening to ringback and other messages. ASTERISK-17834 which causes this issue was dealing with a non-compliant network switch. (closes issue ASTERISK-21151) Reported by: Gianluca Merlo Tested by: rmudgett ........ Merged revisions 384685 from http://svn.asterisk.org/svn/asterisk/branches/1.8 ........ Merged revisions 384689 from http://svn.asterisk.org/svn/asterisk/branches/11 git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@384696 65c4cc65-6c06-0410-ace0-fbb531ad65f3	13 years ago
David M. Lee	641fc7ea54	Sample config file for stasis-core. ... (issue ASTERISK-20887) git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@383225 65c4cc65-6c06-0410-ace0-fbb531ad65f3	13 years ago
Matthew Jordan	8d5c36c9bb	Add RFC 3327 Path header support to chan_sip ... This patch adds support for RFC 3327 "Path" headers. This can be enabled in sip.conf using the 'supportpath' setting, either on a global basis or on a peer basis. This setting enables Asterisk to route outgoing out-of-dialog requests via a set of proxies by using a pre-loaded route-set defined by the Path headers in the REGISTER request. This patch also adds Realtime support for dynamically updating the Path information for a peer. A huge thank-you to Klaus Darillion and Olle E Johansson for their efforts in writing this patch. Review: https://reviewboard.asterisk.org/r/2235/ Review: https://reviewboard.asterisk.org/r/991/ (closes issue ASTERISK-16884) Reported by: klaus3000 Tested by: klaus3000, oej, mjordan patches: path-1.8.0-patch.txt uploaded by klaus3000 (License 5054) oolong-path-support-trunk in team branch by oej (License 5267) git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@382440 65c4cc65-6c06-0410-ace0-fbb531ad65f3	13 years ago
Matthew Jordan	33e4c6115f	Ensure that the default bridge/user profiles are always available ... ConfBridge and Page require that there always be a default bridge and user profile available. While properties of the default profiles can be overriden in the configuration file, removing them can create situations where neither application can function properly. This patch ensures that if an administrator removes the profiles from the confbridge.conf configuration file, the profiles are added upon load. Documentation clarifying this has been added to the confbridge.conf.sample file. Review: https://reviewboard.asterisk.org/r/2356/ (closes issue AST-1115) Reported by: John Bigelow Tested by: John Bigelow ........ Merged revisions 382066 from http://svn.asterisk.org/svn/asterisk/branches/11 git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@382067 65c4cc65-6c06-0410-ace0-fbb531ad65f3	13 years ago
Damien Wedhorn	0d553eece8	Add serviceURL stuff to skinny. ... Patch adds all the packet and structure stuff to skinny to enable setting service URLs in skinny, such as corporate directories. This stuff is only relevant during load/unload as when activated. Also some minor changes removing duplicated counting of addons and speedials in handle_skinny_show_devices. Review: https://reviewboard.asterisk.org/r/2321/ git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@381718 65c4cc65-6c06-0410-ace0-fbb531ad65f3	13 years ago
Walter Doekes	d4d1d10307	Remove "registertrying" and add "rtp_engine" from/to sip.conf.sample ... The "registertrying" option was removed in r343220. The "rtp_engine" option was added in r186078 but erroneously named "engine" in the sample. Note that there is no global sip setting for a different engine. ........ Merged revisions 381668 from http://svn.asterisk.org/svn/asterisk/branches/1.8 ........ Merged revisions 381669 from http://svn.asterisk.org/svn/asterisk/branches/11 git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@381670 65c4cc65-6c06-0410-ace0-fbb531ad65f3	13 years ago
Matthew Jordan	d04ab3c645	Add CLI configuration documentation ... This patch allows a module to define its configuration in XML in source, such that it can be parsed by the XML documentation engine. Documentation is generated in a two-pass approach: 1. The documentation is first generated from the XML pulled from the source 2. The documentation is then enhanced by the registration of configuration options that use the configuration framework This patch include configuration documentation for the following modules: * chan_motif * res_xmpp * app_confbridge * app_skel * udptl Two new CLI commands have been added: * config show help - show configuration help by module, category, and item * xmldoc dump - dump the in-memory representation of the XML documentation to a new XML file. Review: https://reviewboard.asterisk.org/r/2278 Review: https://reviewboard.asterisk.org/r/2058 patches: on review 2058 uploaded by twilson git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@381527 65c4cc65-6c06-0410-ace0-fbb531ad65f3	13 years ago
Jonathan Rose	1a70d513f1	Call Parking: Set PARKINGLOT and PARKINGSLOT variables on all parked calls ... These two variables were previously not being set when comebacktoorigin=yes and the example configs seemed to imply that they should be. Since there is no harm in this and since calls that are sent back to origin are capable of continuing in the dialplan, this seemed like a no-brainer. Also it supports some bridging tests I've been working on. git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@381068 65c4cc65-6c06-0410-ace0-fbb531ad65f3	13 years ago
Damien Wedhorn	44872e797c	Reset skinny vmexten and immeddial char on reload. ... Make skinny reset vmexten and immeddial to '\0' on reload to ensure that it is set to '\0' if the appropriate item is removed/commented in skinny.conf. Also small fix re immeddial char in skinny.conf and add immedial setting to skinny show settings. (closes issue ASTERISK-21037) Reported by: snuffy Tested by: snuffy, myself Patches: immed_dial_fix.diff uploaded by snuffy (license 5024) git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@380925 65c4cc65-6c06-0410-ace0-fbb531ad65f3	13 years ago
Russell Bryant	dfdf3d9909	Add queue_log_realtime_use_gmt option to logger.conf ... Add an option that lets you specify that the timestamps going into the realtime queue log should be in GMT instead of local time. Review: https://reviewboard.asterisk.org/r/2287/ git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@380209 65c4cc65-6c06-0410-ace0-fbb531ad65f3	13 years ago