(or ~500 chars max on LOW_MEMORY) to 80 chars max). This will allow more
channels to be used in a single hint.
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@159162 65c4cc65-6c06-0410-ace0-fbb531ad65f3
https://origsvn.digium.com/svn/asterisk/branches/1.4
........
r158600 | tilghman | 2008-11-21 17:07:46 -0600 (Fri, 21 Nov 2008) | 5 lines
The passed extension may not be the same in the list as the current entry,
because we strip spaces when copying the extension into the structure.
Therefore, use the copied item to place the item into the list.
(found by lmadsen on -dev, fixed by me)
........
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@158602 65c4cc65-6c06-0410-ace0-fbb531ad65f3
Reported by: smurfix
This reverts a change I made in 116297. At the time it seemed the change was required to solve an issue with attempting a transfer but then letting it timeout without dialing any digits. However, I didn't realize that having an empty extension was possible. I'm removing the immediate return that was added in pbx_find_extension if the extension is null.
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@156649 65c4cc65-6c06-0410-ace0-fbb531ad65f3
https://origsvn.digium.com/svn/asterisk/branches/1.4
........
r156297 | murf | 2008-11-12 12:36:16 -0700 (Wed, 12 Nov 2008) | 18 lines
It turns out that the 0x0XX00 codes being returned for
N, X, and Z are off by one, as per conversation with
jsmith on #asterisk-dev; he was teaching a class
and disconcerted that this published rule was not
being followed, with patterns _NXX, _[1-8]22 and
_[2-9]22... and NXX was winning, but [1-8] should
have been.
This change, tested on these 3 patterns now
picks the proper one.
However, this change may surprise users who
set up dialplans based on previous behavior,
which has been there for what, 2 and half
years or so now.
........
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@156299 65c4cc65-6c06-0410-ace0-fbb531ad65f3
- Add CLI aliases module to asterisk.
- Remove all deprecated CLI commands from the code
Initial work done by file.
Junk-Y and lmadsen did a lot of work and testing to
get the list of deprecated commands into the configuration file.
Deprecated CLI commands are now handled by this new module,
see cli_aliases.conf for more info about that.
ok russellb@ via reviewboard
(closes issue #13735)
Reported by: mvanbaak
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@156120 65c4cc65-6c06-0410-ace0-fbb531ad65f3
container. The OBJ_MULTIPLE flag must be provided here. Otherwise, this would
only remove a single object.
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@155241 65c4cc65-6c06-0410-ace0-fbb531ad65f3
Functions are printed without parenthesis like: FUNTION
Applications are printed with parenthesis like: AppName()
Cli commands are printed like: 'core show application'
The other type of references are printed as they are inside the <ref> tag.
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@154967 65c4cc65-6c06-0410-ace0-fbb531ad65f3
This commit introduces the first phase of an effort to manage documentation of the
interfaces in Asterisk in an XML format. Currently, a new format is available for
applications and dialplan functions. A good number of conversions to the new format
are also included.
For more information, see the following message to asterisk-dev:
http://lists.digium.com/pipermail/asterisk-dev/2008-October/034968.html
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@153365 65c4cc65-6c06-0410-ace0-fbb531ad65f3
the trie info when they do 'dialplan show ...'
(even with debug set to non-zero); so I set up a
'dialplan debug [context]' cli command instead,
to explicitly show just the trie info. I even
added an extension_exists() call to make sure the
trie info is built. I moved the explanatory header
to above the extension loop to ensure it only prints
once. And it will do this now, whether debug is set
or not.
I removed the trie printing from the 'dialplan show'
command entirely.
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@148519 65c4cc65-6c06-0410-ace0-fbb531ad65f3
Reported by: nickpeirson
Patches:
pbx.c.patch uploaded by nickpeirson (license 579)
replace_bzero+bcopy.patch uploaded by nickpeirson (license 579)
Tested by: nickpeirson, murf
1. replaced all refs to bzero and bcopy to memset and memmove instead.
2. added a note to the CODING-GUIDELINES
3. add two macros to asterisk.h to prevent bzero, bcopy from creeping
back into the source
4. removed bzero from configure, configure.ac, autoconfig.h.in
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@147807 65c4cc65-6c06-0410-ace0-fbb531ad65f3
https://origsvn.digium.com/svn/asterisk/branches/1.4
........
r144677 | murf | 2008-09-26 11:47:13 -0600 (Fri, 26 Sep 2008) | 12 lines
(closes issue #13563)
Reported by: mnicholson
Patches:
found1.diff uploaded by mnicholson (license 96)
This patch was mainly meant to apply to trunk and 1.6.x,
but I'm applying it to 1.4 also, which should be a perfectly
harmless fix to the vast majority of users who are not using
external switches, but the few who might be affected
will not have to go to the pain of filing a bug report.
........
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@144678 65c4cc65-6c06-0410-ace0-fbb531ad65f3
Reported by: nickpeirson
The user attached a patch, but the license is not yet
recorded. I took the liberty of finding and replacing
ALL index() calls with strchr() calls, and that
involves more than just main/pbx.c;
chan_oss, app_playback, func_cut also had calls
to index(), and I changed them out. 1.4 had no
references to index() at all.
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@144569 65c4cc65-6c06-0410-ace0-fbb531ad65f3
https://origsvn.digium.com/svn/asterisk/branches/1.4
........
r142675 | murf | 2008-09-11 22:29:34 -0600 (Thu, 11 Sep 2008) | 29 lines
Tested by: sergee, murf, chris-mac, andrew, KNK
This is a "second attempt" to restore the previous "endbeforeh" behavior
in 1.4 and up. In order to capture information concerning all the
legs of transfers in all their infinite combinations, I was forced
to this particular solution by a chain of logical necessities, the
first being that I was not allowed to rewrite the CDR mechanism from
the ground up!
This change basically leaves the original machinery alone, which allows
IVR and local channel type situations to generate CDR's as normal, but
a channel flag can be set to suppress the normal running of the h exten.
That flag would be set by the code that runs the h exten from the
ast_bridge_call routine, to prevent the h exten from being run twice.
Also, a flag in the ast_bridge_config struct passed into ast_bridge_call
can be used to suppress the running of the h exten in that routine. This
would happen, for instance, if you use the 'g' option in the Dial app.
Running this routine 'early' allows not only the CDR() func to be used
in the h extension for reading CDR variables, but also allows them to
be modified before the CDR is posted to the backends.
While I dearly hope that this patch overcomes all problems, and
introduces no new problems, reality suggests that surely someone
will have problems. In this case, please re-open 13251 (or 13289),
and we'll see if we can't fix any remaining issues.
** trunk note: some code to suppress the h exten being run
from app_queue was added; for the 'continue' option available
only in trunk/1.6.x.
........
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@142676 65c4cc65-6c06-0410-ace0-fbb531ad65f3
https://origsvn.digium.com/svn/asterisk/branches/1.4
........
r141806 | russell | 2008-09-08 16:02:36 -0500 (Mon, 08 Sep 2008) | 7 lines
When doing an async goto, detect if the channel is already in the middle of a
masquerade. This can happen when chan_local is trying to optimize itself out.
If this happens, fail the async goto instead of bursting into flames.
(closes issue #13435)
Reported by: geoff2010
........
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@141807 65c4cc65-6c06-0410-ace0-fbb531ad65f3
of changes to the Set and MSet apps, so people aren't
so shocked and surprised when they upgrade from
1.4 to 1.6.
Also, for the sake of those upgrading from 1.4 to
1.6 with AEL, I provide automatic support for the
"old" way of using Set(), that still does the
exact same old thing with quotes and backslashes
and so on as 1.4 did, by having AEL compile in the
use of MSet() instead of Set(), everywhere it inserts
this code.
But, if the app_set var is set to 1.6 or higher,
it uses the "new", non-evaluative Set().
This only usually happens if the user manually
inserts this into the asterisk.conf file, or runs
the "make samples" command.
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@140824 65c4cc65-6c06-0410-ace0-fbb531ad65f3
https://origsvn.digium.com/svn/asterisk/branches/1.4
........
r140670 | murf | 2008-09-02 16:15:57 -0600 (Tue, 02 Sep 2008) | 14 lines
(closes issue #13409)
Reported by: tomaso
Patches:
asterisk-1.6.0-rc2-cdrmemleak.patch uploaded by tomaso (license 564)
I basically spent the day, verifying that this patch
solves the problem, and doesn't hurt in non-problem
cases. Why valgrind did not plainly reveal this leak
absolutely mystifies and stuns me.
Many, many thanks to tomaso for finding and providing the fix.
........
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@140691 65c4cc65-6c06-0410-ace0-fbb531ad65f3
https://origsvn.digium.com/svn/asterisk/branches/1.4
........
r139764 | murf | 2008-08-25 09:33:14 -0600 (Mon, 25 Aug 2008) | 9 lines
This patch reverts the changes made via 139347, and 139635, as users
are seeing adverse difference.
I will un-close 13251.
Back to the drawing board/ concept/ beginning/ whatever!
........
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@139770 65c4cc65-6c06-0410-ace0-fbb531ad65f3
https://origsvn.digium.com/svn/asterisk/branches/1.4
........
r139347 | murf | 2008-08-21 17:03:50 -0600 (Thu, 21 Aug 2008) | 47 lines
(closes issue #13251)
Reported by: sergee
Tested by: murf
THis is a bold move for a static release fix, but I wouldn't have
made it if I didn't feel confident (at least a *bit* confident)
that it wouldn't mess everyone up.
The reasoning goes something like this:
1. We simply cannot do anything with CDR's at the current point
(in pbx.c, after the __ast_pbx_run loop). It's way too late to
have any affect on the CDRs. The CDR is already posted and gone,
and the remnants have been cleared.
2. I was very much afraid that moving the running of the 'h'
extension down into the bridge code (where it would be now
practical to do it), would result in a lot more calls to the
'h' exten, so I implemented it as another exten under another
name, but found, to my pleasant surprise, that there was a
1:1 correspondence to the running of the 'h' exten in the
pbx_run loop, and the new spot at the end of the bridge.
So, I ifdef'd out the current 'h' loop, and moved it into
the bridge code. The only difference I can see is the stuff
about the AST_PBX_KEEPALIVE, and hopefully, if this
is still an important decision point, I can replicate it
if there are complaints. To be perfectly honest,
the KEEPALIVE situation is not totally clear to me,
and how it relates to a post-bridge situation is less
clear. I suspect the users will point out everything
in total clarity if this steps on anyone's toes!
3. I temporarily swap the bridge_cdr into the channel
before running the 'h' exten, which makes it possible
for users to edit the cdr before it goes out the door.
And, of course, with the endbeforehexten config var set,
the users can also get at the billsec/duration vals.
After the h exten finishes, the cdr is swapped back
and processing continues as normal.
Please, all who deal with CDR's, please test this version
of Asterisk, and file bug reports as appropriate!
........
I also made a little fix to the app_dial's 'e' option,
that is related to my updates.
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@139627 65c4cc65-6c06-0410-ace0-fbb531ad65f3
to the Set app in trunk/1.6.x, as they come from the 1.4 world. They are only bitten if
they write their AEL dialplan in the 1.4 world, and then carry it over to a trunk/1.6.x
installation where a "make samples" was executed, or where they hand-edited the
asterisk.conf file and added the [compat] category with app_set = 1.6 (or higher).
(this commit does not totally solve 13249, at least not yet)
The change involves issueing a single warning while the AEL file is loading, if:
1. app_set is present in the config file, and set to 1.6 or higher.
2. there are double quotes in an assignment statement (eg x = "hi there";)
3. the warning was not already issued.
The standalone app, aelparse, does not (yet) issue this warning. I'd have to
have it read in the asterisk.conf file, and that's a bit of hassle. I'll add
it if users request it, tho.
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@138815 65c4cc65-6c06-0410-ace0-fbb531ad65f3
Reported by: falves11
Tested by: murf
falves11 ==
The changes I introduce here seem to clear up the problem
for me. However, if they do not for you, please reopen this
bug, and we'll keep digging.
The root of this problem seems to be a subtle memory corruption
introduced when creating an extension with an empty extension
name. While valgrind cannot detect it outside of DEBUG_MALLOC
mode, when compiled with DEBUG_MALLOC, this is certain death.
The code in main/features.c is a puzzle to me. On the initial
module load, the code is attempting to add the parking extension
before the features.conf file has even been opened!
I just wrapped the offending call with an if() that will not
try to add the extension if the extension name is empty. THis
seems to solve the corruption, and let the "memory show allocations"
work as one would expect.
But, really, adding an extension with an empty name is a seriously
bad thing to allow, as it will mess up all the pattern matching
algorithms, etc. So, I added a statement to the add_extension2 code to return
a -1 if this is attempted.
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@135265 65c4cc65-6c06-0410-ace0-fbb531ad65f3
Reported by: murf
Tested by: murf
For: J. Geis
The 'data' field in the ast_exten struct was being
'moved' from the current dialplan to the replacement
dialplan. This was not good, as the current dialplan
could have problems in the time between the change
and when the new dialplan is swapped in.
So, I modified the merge_and_delete code to strdup
the 'data' field (the args to the app call), and
then it's freed as normal.
I improved a few messages; I added code to limit
the number of calls to the context_merge_incls_swits_igps_other_registrars()
to one per context. I don't think having it called
multiple times per context was doing anything bad,
but it was inefficient.
I hope this fixes the problems Mr. Geiss was noting in
asterisk-users, see
http://lists.digium.com/pipermail/asterisk-users/2008-July/215634.html
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@133299 65c4cc65-6c06-0410-ace0-fbb531ad65f3
https://origsvn.digium.com/svn/asterisk/branches/1.4
........
r130959 | tilghman | 2008-07-15 12:19:13 -0500 (Tue, 15 Jul 2008) | 8 lines
astman_send_error does not need a newline appended -- the API takes care of
that for us.
(closes issue #13068)
Reported by: gknispel_proformatique
Patches:
asterisk_1_4_astman_send.patch uploaded by gknispel (license 261)
asterisk_trunk_astman_send.patch uploaded by gknispel (license 261)
........
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@131044 65c4cc65-6c06-0410-ace0-fbb531ad65f3
Reported by: eliel
OK, now the context registrar slot is strdup'd. It is freed
on destruction. I don't see the need to do this with all
the structs' registrar fields, but if some wild case proves
they should also be handled this way, then we can
put in the extra work at that time.
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@130297 65c4cc65-6c06-0410-ace0-fbb531ad65f3
Reported by: eliel
Tested by: murf
(closes issue #12960)
Reported by: mnicholson
In this 'omnibus' fix, I **think** I solved both
the problem in 13041, where unloading pbx_ael.so
caused crashes, or incomplete removal of previous
registrar'ed entries. And I added code to completely
remove all includes, switches, and ignorepats that
had a matching registrar entry, which should
appease 12960.
I also added a lot of seemingly useless brackets
around single statement if's, which helped debug
so much that I'm leaving them there.
I added a routine to check the correlation between
the extension tree lists and the hashtab
tables. It can be amazingly helpful when you have
lots of dialplan stuff, and need to narrow
down where a problem is occurring. It's ifdef'd
out by default.
I cleaned up the code around the new CIDmatch code.
It was leaving hanging extens with bad ptrs, getting confused
over which objects to remove, etc. I tightened
up the code and changed the call to remove_exten
in the merge_and_delete code.
I added more conditions to check for empty context
worthy of deletion. It's not empty if there are
any includes, switches, or ignorepats present.
If I've missed anything, please re-open this bug,
and be prepared to supply example dialplan code.
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@130145 65c4cc65-6c06-0410-ace0-fbb531ad65f3
AMI commands can display that a channel is under control of an AGI.
Work inspired by work at customer site, but paid for by Edvina AB
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@128240 65c4cc65-6c06-0410-ace0-fbb531ad65f3
https://origsvn.digium.com/svn/asterisk/branches/1.4
........
r127973 | tilghman | 2008-07-03 22:30:30 -0500 (Thu, 03 Jul 2008) | 8 lines
Fix the 'dialplan remove extension' logic, so that it a) works with cidmatch,
and b) completes contexts correctly when the extension is ambiguous.
(closes issue #12980)
Reported by: licedey
Patches:
20080703__bug12980.diff.txt uploaded by Corydon76 (license 14)
Tested by: Corydon76
........
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@128027 65c4cc65-6c06-0410-ace0-fbb531ad65f3
https://origsvn.digium.com/svn/asterisk/branches/1.4
........
r127663 | murf | 2008-07-02 18:16:25 -0600 (Wed, 02 Jul 2008) | 30 lines
The CDRfix4/5/6 omnibus cdr fixes.
(closes issue #10927)
Reported by: murf
Tested by: murf, deeperror
(closes issue #12907)
Reported by: falves11
Tested by: murf, falves11
(closes issue #11849)
Reported by: greyvoip
As to 11849, I think these changes fix the core problems
brought up in that bug, but perhaps not the more global
problems created by the limitations of CDR's themselves
not being oriented around transfers.
Reopen if necc, but bug reports are not the best
medium for enhancement discussions. We need to start
a second-generation CDR standardization effort to cover
transfers.
(closes issue #11093)
Reported by: rossbeer
Tested by: greyvoip, murf
........
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@127793 65c4cc65-6c06-0410-ace0-fbb531ad65f3
Reported by: ys
Many thanks to ys for doing the research on this problem.
I didn't think it would be best to unlock the contexts
and then relock them after the remove_extension2() call,
so I added an extra arg to remove_extension2() and set it
appropriately in each call. There were not that many.
I considered forcing the code to lock the contexts before
the call to remove_extension2(), but that would require
a slightly greater degree of changes, especially since
the find_context_locked is local to pbx.c
I did a simple sanity test to make sure the code doesn't
mess things up in general.
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@123165 65c4cc65-6c06-0410-ace0-fbb531ad65f3
This commit merges in the rest of the code needed to support distributed device
state. There are two main parts to this commit.
Core changes:
- The device state handling in the core has been updated to understand device
state across a cluster of Asterisk servers. Every time the state of a device
changes, it looks at all of the device states on each node, and determines the
aggregate device state. That resulting device state is what is provided to
modules in Asterisk that take actions based on the state of a device.
New module, res_ais:
- A module has been written to facilitate the communication of events between
nodes in a cluster of Asterisk servers. This module uses the SAForum AIS
(Service Availability Forum Application Interface Specification) CLM and EVT
services (Cluster Management and Event) to handle this task. This module
currently supports sharing Voicemail MWI (Message Waiting Indication) and
device state events between servers. It has been tested with openais, though
other implementations of the spec do exist.
For more information on testing distributed device state, see the following doc:
- doc/distributed_devstate.txt
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@121559 65c4cc65-6c06-0410-ace0-fbb531ad65f3
This commit breaks out some logic from pbx.c into a simple API. The hint
processing code had logic for taking the state from multiple devices and
turning that into the state for a single extension. So, I broke this out
and made an API that lets you take multiple device states and determine
the aggregate device state. I needed this for some core device state changes
to support distributed device state.
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@121501 65c4cc65-6c06-0410-ace0-fbb531ad65f3
DUNDi uses a concept called the Entity ID for unique server identifiers. I have
pulled out the handling of EIDs and made it something available to all of Asterisk.
There is now a global Entity ID that can be used for other purposes as well, such
as code providing distributed device state, which is why I did this. The global
Entity ID is set automatically, just like it was done in DUNDi, but it can also be
set in asterisk.conf. DUNDi will now use this global EID unless one is specified
in dundi.conf.
The current EID for the system can be seen in the "core show settings" CLI command.
It is also available in the dialplan via the ENTITYID variable.
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@121439 65c4cc65-6c06-0410-ace0-fbb531ad65f3
and off for new installations. This includes the translation from pipes to commas
for pbx_realtime and the EXEC command for AGI, as well as the change to the Set
application not to support multiple variables at once.
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@120171 65c4cc65-6c06-0410-ace0-fbb531ad65f3
https://origsvn.digium.com/svn/asterisk/branches/1.4
........
r114579 | file | 2008-04-23 11:54:11 -0300 (Wed, 23 Apr 2008) | 4 lines
Instead of stopping dialplan execution when SayNumber attempts to say a large number that it can not print out a message informing the user and continue on.
(closes issue #12502)
Reported by: bcnit
........
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@114580 65c4cc65-6c06-0410-ace0-fbb531ad65f3
a. fix a self-found problem with SPAWN-ing an extension,
where matches were not being found
b. correct some wording in a comment
c. Add some debug for future debugging.
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@114146 65c4cc65-6c06-0410-ace0-fbb531ad65f3
were handled. In 1.4, if the absolute timeout were reached on a call, no matter what
the return value of ast_spawn_extension was, the pbx would attempt to go to the 'T'
extension or hangup otherwise. The rearrangement of this function in trunk made this check
only happen in the case that ast_spawn_extension returned 0. If ast_spawn_extension returned
1, then the fact that the timeout expired resulted in a no-op, and would cause an infinite
loop to occur in __ast_pbx_run. This change fixes this problem. Now timeouts will
behave as they did in 1.4
(closes issue #11550)
Reported by: pj
Tested by: putnopvut
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@113836 65c4cc65-6c06-0410-ace0-fbb531ad65f3
Reported by: falves11
Patches:
12298.patch1 uploaded by murf (license 17)
Tested by: murf
I have hopes that the changes made over the last few days will
finalize and solidify this code. While there are bound to be
small tweaks still needed, I feel that the job (at last) is
somewhat completed. Finally, I had a chance to comprehend how
the scoring of extension patterns was done in the previous
version, and I've come very close to using the exact same
criteria in the new pattern matching code. The left-right
sorting is now replicated in the trie structure itself, such
that the first match found will the 'best' match. Compared
the results against 1.4 for several extensions. Replicated
falves11's setup and it works. Used some devious patterns
provided by jsmith, supplemented with a few of my own.
Looks good.
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@112289 65c4cc65-6c06-0410-ace0-fbb531ad65f3
https://origsvn.digium.com/svn/asterisk/branches/1.4
........
r111391 | murf | 2008-03-27 07:03:28 -0600 (Thu, 27 Mar 2008) | 9 lines
These small documentation updates made in response to a query in
asterisk-users, where a user was using Playback, but needed the
features of Background, and had no idea that Background existed,
or that it might provide the features he needed. I thought the
best way to avert these kinds of queries was to provide "See Also"
references in all three of "Background", "Playback", "WaitExten".
Perhaps a project to do this with all related apps is in order.
........
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@111410 65c4cc65-6c06-0410-ace0-fbb531ad65f3
Reported by: mvanbaak
Tested by: murf, mvanbaak
Due to a bug that occurred when merge_contexts_and_delete scanned the "old" or existing contexts, and found a context
that doesn't exist in the new set, yet owned by a different registrar. The context is created in the new set, with the
old registrar, and and all the priorities and extens that have a different registrar are copied into it. But, not the
includes, ignorepats, and switches. I added code to do this immediately after the context is created.
This still leaves a logical hole in the code. If you define a context in two places, (eg. in extensions.conf and also
in extensions.ael), and they both have includes, but different in composition, no new context will be generated, and
therefore the 'old' includes, switches, and ignorepats will not be copied. I'd have added code to simply add any non-duplicates
into the 'new' context that had a different registrar, but there is one big complication: includes, and switches are definitely
order dependent. (ignorepats I'm not sure about). And we'll have to develop some sort of policy about how we
merge order dependent lists, especially if the intersection of the two sets is empty. (in other words, they do not have any
elements in common). Do the new go first, or the old? I've elected to punt this issue until a user complains. Hopefully,
this is pretty rare thing.
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@109169 65c4cc65-6c06-0410-ace0-fbb531ad65f3
https://origsvn.digium.com/svn/asterisk/branches/1.4
........
r107161 | russell | 2008-03-10 15:17:11 -0500 (Mon, 10 Mar 2008) | 8 lines
Fix another bug specifically related to asynchronous call origination. Once the
PBX is started on the channel using ast_pbx_start(), then the ownership of the
channel has been passed on to another thread. We can no longer access it in this
code. If the channel gets hung up very quickly, it is possible that we could
access a channel that has been free'd.
(inspired by BE-386)
........
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@107162 65c4cc65-6c06-0410-ace0-fbb531ad65f3
https://origsvn.digium.com/svn/asterisk/branches/1.4
........
r107158 | russell | 2008-03-10 15:04:27 -0500 (Mon, 10 Mar 2008) | 9 lines
Fix some bugs related to originating calls. If the code failed to start a PBX
on the channel (such as if you set a call limit based on the system's load
average), then there were cases where a channel that has already been free'd
using ast_hangup() got accessed. This caused weird memory corruption and
crashes to occur.
(fixes issue BE-386)
(much debugging credit goes to twilson, final patch written by me)
........
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@107159 65c4cc65-6c06-0410-ace0-fbb531ad65f3
Reported by: rizzo
Tested by: murf
Proposal of the changes to be made, and then an announcement of how they were accomplished:
http://lists.digium.com/pipermail/asterisk-dev/2008-February/032065.html
and:
http://lists.digium.com/pipermail/asterisk-dev/2008-March/032124.html
Here is a recap, file by file, of what I have done:
pbx/pbx_config.c
pbx/pbx_ael.c
All funcs that were passed a ptr to the context list, now will ALSO be passed a hashtab ptr to the same set.
Why? because (for the time being), the dialplan is stored in both, to facilitate a quick, low-cost move to
hash-tables to speed up dialplan processing. If it was deemed necessary to pass the context LIST, well, it
is just as necessary to have the TABLE available. This is because the list/table in question might not be
the global one, but temporary ones we would use to stage the dialplan on, and then swap into the global
position when things are ready.
We now have one external function for apps to use, "ast_context_find_or_create()" instead of the pre-existing
"find" and "create", as all existing usages used both in tandem anyway.
pbx_config, and pbx_ael, will stage the reloaded dialplan into local lists and tables, and
then call merge_contexts_and_delete, which will merge (now) existing contexts and
priorities from other registrars into this local set by copying them. Then, merge_contexts_and_delete will
lock down the contexts, swap the lists and tables, and unlock (real quick), and then
destroy the old dialplan.
chan_sip.c
chan_iax.c
chan_skinny.c
All the channel drivers that would add regcontexts now use the ast_context_find_or_create now.
chan_sip also includes a small fix to get rid of warnings about removing priorities that never got entered.
apps/app_meetme.c
apps/app_dial.c
apps/app_queue.c
All the apps that added a context/exten/priority were also modified to use ast_context_find_or_create instead.
include/asterisk/pbx.h
ast_context_create() is removed. Find_or_create_ is the new method.
ast_context_find_or_create() interface gets the hashtab added.
ast_merge_contexts_and_delete() gets the local hashtab arg added.
ast_wrlock_contexts_version() is added so you can detect if someone else got a writelock between your readlocking and writelocking.
ast_hashtab_compare_contexts was made public for use in pbx_config/pbx_ael
ast_hashtab_hash_contexts was in like fashion make public.
include/asterisk/pval.h
ast_compile_ael2() interface changed to include the local hashtab table ptr.
main/features.c
For the sake of the parking context, we use ast_context_find_or_create().
main/pbx.c
I changed all the "tree" names to "table" instead. That's because the original
implementation was based on binary trees. (had a free library). Then I moved
to hashtabs. Now, the names move forward too.
refcount field added to contexts, so you can keep track of how many modules
wanted this context to exist.
Some log messages that are warnings were inflated from LOG_NOTICE to LOG_WARNING.
Added some calls to ast_verb(3,...) for debug messages
Lots of little mods to ast_context_remove_extension2, which is now excersized in ways
it was not previously; one definite bug fixed.
find_or_create was upgraded to handle both local lists/tables as well as the globals.
context_merge() was added to do the per-context merging of the old/present contexts/extens/prios into the new/proposed local list/tables
ast_merge_contexts_and_delete() was heavily modified.
ast_add_extension2() was also upgraded to handle changes.
the context_destroy() code was re-engineered to handle the new way of doing things,
by exten/prio instead of by context.
res/ael/pval.c
res/ael/ael.tab.c
res/ael/ael.tab.h
res/ael/ael.y
res/ael/ael_lex.c
res/ael/ael.flex
utils/ael_main.c
utils/extconf.c
utils/conf2ael.c
utils/Makefile
Had to change the interface to ast_compile_ael2(), to include the hashtab ptr.
This ended up involving several external apps. The main gotcha was I had to
include lock.h and hashtab.h in several places.
As a side note, I tested this stuff pretty thoroughly, I replicated the problems
originally reported by Luigi, and made triply sure that reloads worked, and everything
worked thru "stop gracefully". I found a and fixed a few bugs as I was merging into
trunk, that did not appear in my tests of bug6002.
How's this for verbose commit messages?
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@106757 65c4cc65-6c06-0410-ace0-fbb531ad65f3
https://origsvn.digium.com/svn/asterisk/branches/1.4
........
r106437 | mmichelson | 2008-03-06 16:10:07 -0600 (Thu, 06 Mar 2008) | 8 lines
Quell an annoying message that is likely to print every single time that
ast_pbx_outgoing_app is called. The reason is that __ast_request_and_dial
allocates the cdr for the channel, so it should be expected that the channel
will have a cdr on it.
Thanks to joetester on IRC for pointing this out
........
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@106438 65c4cc65-6c06-0410-ace0-fbb531ad65f3
https://origsvn.digium.com/svn/asterisk/branches/1.4
........
r105005 | qwell | 2008-02-28 13:20:10 -0600 (Thu, 28 Feb 2008) | 9 lines
Make pbx_exec pass an empty string into applications, if we get NULL.
This protects against possible segfaults in applications that may try
to use data before checking length (ast_strdupa'ing it, for example)
(closes issue #12100)
Reported by: foxfire
Patches:
12100-nullappargs.diff uploaded by qwell (license 4)
........
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@105006 65c4cc65-6c06-0410-ace0-fbb531ad65f3
(closes issue #8925)
About a year ago, as Leif Madsen and Jim van Meggelen were going over the CLI
commands in Asterisk 1.4 for the next version of their book, they documented
a lot of inconsistencies. This set of changes addresses all of these issues
and has been reviewed by Leif.
While this does introduce even more changes to the CLI command structure, it
makes everything consistent, which is the most important thing.
Thanks to all that helped with this one!
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@103171 65c4cc65-6c06-0410-ace0-fbb531ad65f3
1) Add the Dialplan class, for NewExten and VarSet events, which should cut
down on the volume of traffic in the Call class.
2) Permit some commands to be run from multiple classes, such as allowing
DBGet to be run from either the System or the Reporting class.
3) Heavily document each class in the sample config, as there were several
that made no sense to be in the write= line, and two that made no sense to be
in the read= line (since they controlled no permissions there).
(Closes issue #10386)
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@97651 65c4cc65-6c06-0410-ace0-fbb531ad65f3
https://origsvn.digium.com/svn/asterisk/branches/1.4
........
r95577 | mmichelson | 2007-12-31 17:43:13 -0600 (Mon, 31 Dec 2007) | 9 lines
Avoiding a potentially bad locking situation. ast_merge_contexts_and_delete writelocks the conlock, then
calls ast_hint_extension, which attempts to readlock the same lock. Recursion with read-write locks is
dangerous, so the inner lock needs to be removed. I did this by copying the "guts" of ast_hint_extension
into ast_merge_contexts_and_delete (sans the extra lock).
(this change is inspired by the locking problems seen in issue #11080, but I have no idea if this is the
problematic area experienced by the reporters of that issue)
........
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@95578 65c4cc65-6c06-0410-ace0-fbb531ad65f3
equivalent to the check done by ast_verb, I wrote a macro, VERBOSITY_LEVEL, which does this
check. I did a quick look in the source and used this macro in some places where option_verbose
was used.
I also converted some verbose messages in logger.c to use ast_verb instead of ast_verbose.
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@93042 65c4cc65-6c06-0410-ace0-fbb531ad65f3
https://origsvn.digium.com/svn/asterisk/branches/1.4
........
r90967 | russell | 2007-12-04 13:57:39 -0600 (Tue, 04 Dec 2007) | 7 lines
Make some changes to some additions I made recently for doing channel autoservice
when looking up extensions. This code was added to handle the case where a
dialplan switch was in use that could block for a long time. However, the way
that I added it, it did this for all extension lookups. However, lookups in the
in-memory tree of extensions should _not_ take long enough to matter. So, move
the autoservice stuff to be only around executing a switch.
........
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@91011 65c4cc65-6c06-0410-ace0-fbb531ad65f3
https://origsvn.digium.com/svn/asterisk/branches/1.4
........
r90059 | mmichelson | 2007-11-28 16:08:50 -0600 (Wed, 28 Nov 2007) | 13 lines
Removing some seemingly pointless code. This sets a channel variable for every priority
executed in the dialplan if you have debug set to anything non-zero. This seems pointless
due to the fact that these channel variables are not referenced anywhere else in the code and
their names are esoteric enough that they would not be practical to reference in the dialplan. Plus
the fact that this behavior isn't documented anywhere means that the change is not likely to cause
any disruption. If anything, this may actually cause a slight performance increase if running with
debug on.
The motivating influence for this code change is the eventwhencalled option for queues. If set to
vars, all channel variables will be output to the manager. These unnecessary channel variables make
the output a lot more difficult to deal with.
........
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@90060 65c4cc65-6c06-0410-ace0-fbb531ad65f3
https://origsvn.digium.com/svn/asterisk/branches/1.4
........
r89893 | russell | 2007-11-27 18:20:13 -0600 (Tue, 27 Nov 2007) | 4 lines
- update documentation for some of the goto functions to note that they
handle locking the channel as needed
- update ast_explicit_goto() to lock the channel as needed
........
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@89915 65c4cc65-6c06-0410-ace0-fbb531ad65f3
https://origsvn.digium.com/svn/asterisk/branches/1.4
........
r89790 | russell | 2007-11-27 15:45:51 -0600 (Tue, 27 Nov 2007) | 41 lines
Merge changes from team/russell/autoservice_1.4
This set of changes fixes an issue that was reported to me on IRC yesterday.
The user, d1mas, was using chan_zap for incoming calls and was having DTMF
recognition issues in some situations. Specifically, he noticed that the
problem occurred when using DISA or WaitExten. He also noticed that when
using Read, the problem did not occur. His system also used DUNDi for
dialplan lookups.
So, he theorized that if the DUNDi lookups blocked for some period of time,
that audio from the zap channel could get lost. If the audio got lost, then
it wouldn't be run through the DTMF detector, and digits could get lost.
He was correct, and the following set of changes fixes the problem. However,
the changes go a little bit further than what was necessary to fix this exact
problem.
1) I updated pbx_extension_helper() to autoservice the associated channel to
handle cases where extension lookups may take a long time. This would
normally be a dialplan switch that does some lookup over the network, such
as the DUNDi or IAX2 switches.
This ensures that even while a DUNDi lookup is blocking, the channel will be
continuously serviced.
2) I made a change to the autoservice code. This is actually something that
has bothered me for a long time. When a channel is in autoservice, _all_
frames get thrown away. However, some frames really shouldn't be thrown
away. The most notable examples are signalling (CONTROL) frames, and DTMF.
So, this patch queues up important frames while a channel is in autoservice.
When autoservice is stopped on the channel, the queued up frames get stuck
back on the channel so that they can get processed instead of thrown away.
3) I made another change to the autoservice code to handle the case where
autoservice is started on channels recursively.
Previously, you could call ast_autoservice_start() multiple times on a
channel, and it would stop the first time ast_autoservice_stop() gets
called. Now, it will ensure that autoservice doesn't actually stop until
the final call to ast_autoservice_stop().
........
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@89791 65c4cc65-6c06-0410-ace0-fbb531ad65f3
Unfortunately, since trunk uses read/write locks for the context lock, it means that I have
actually *introduced* a deadlock condition since they are not recursive. Removing this change
for now and will look into introducing a different one.
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@89483 65c4cc65-6c06-0410-ace0-fbb531ad65f3
https://origsvn.digium.com/svn/asterisk/branches/1.4
........
r89457 | mmichelson | 2007-11-20 11:50:31 -0600 (Tue, 20 Nov 2007) | 9 lines
According to comments in main/pbx.c, it is essential that if we are going to lock
the conlock as well as the hints lock, it must be locked in that respective order.
In order to prevent a potential deadlock, we need to lock the conlock prior to
locking the hints lock in ast_hint_state_changed (see the call stack example on
issue #11323 for how this can happen).
(closes issue #11323, reported by eelcob, suggestion for patch by eelcob, patch by me)
........
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@89458 65c4cc65-6c06-0410-ace0-fbb531ad65f3
build times - tested, there is no measureable difference before and
after this commit.
In this change:
use asterisk/compat.h to include a small set of system headers:
inttypes.h, unistd.h, stddef.h, stddint.h, sys/types.h, stdarg.h,
stdlib.h, alloca.h, stdio.h
Where available, the inclusion is conditional on HAVE_FOO_H as determined
by autoconf.
Normally, source files should not include any of the above system headers,
and instead use either "asterisk.h" or "asterisk/compat.h" which does it
better.
For the time being I have left alone second-level directories
(main/db1-ast, etc.).
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@89333 65c4cc65-6c06-0410-ace0-fbb531ad65f3
- the *_CURRENT macros no longer need the list head pointer argument
- add AST_LIST_MOVE_CURRENT to encapsulate the remove/add operation when moving entries between lists
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@89106 65c4cc65-6c06-0410-ace0-fbb531ad65f3
https://origsvn.digium.com/svn/asterisk/branches/1.4
........
r88805 | russell | 2007-11-05 16:07:54 -0600 (Mon, 05 Nov 2007) | 12 lines
After seeing crashes related to channel variables, I went looking around at the
ways that channel variables are handled. In general, they were not handled in
a thread-safe way. The channel _must_ be locked when reading or writing from/to
the channel variable list.
What I have done to improve this situation is to make pbx_builtin_setvar_helper()
and friends lock the channel when doing their thing. Asterisk API calls almost
all lock the channel for you as necessary, but this family of functions did not.
(closes issue #10923, reported by atis)
(closes issue #11159, reported by 850t)
........
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@88934 65c4cc65-6c06-0410-ace0-fbb531ad65f3
details and examples are in include/asterisk/stringfields.h.
Not applicable to older branches except for 1.4 which will
receive a fix for the routines that free memory pools.
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@88454 65c4cc65-6c06-0410-ace0-fbb531ad65f3
Reported by: jmls
Patches:
pbx.diff uploaded by jmls (license 141)
Add REASON dialplan variable for when an originated call fails and the failed extension is executed.
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@81372 65c4cc65-6c06-0410-ace0-fbb531ad65f3
using old methods of parsing arguments to using the standard macros. However, the big
change is that the really old way of specifying application and arguments separated by
a comma will no longer work (e.g. NoOp,foo|bar). Instead, the way that has been
recommended since long before 1.0 will become the only method available (e.g. NoOp(foo,bar).
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@76703 65c4cc65-6c06-0410-ace0-fbb531ad65f3
Reported by: bbryant
Patches:
20070720__core_debug_by_file.patch uploaded by bbryant (license 36)
(with some modifications by me)
Tested by: russell, bbryant
This set of changes introduces the ability to set the core debug or verbose
levels on a per-file basis. Interestingly enough, in 1.4, you have the ability
to set core debug for a single file, but that functionality was accidentally
lost in the conversion of the CLI commands to the new format.
This patch improves upon what was in 1.4 by letting you set it for more than 1
file, and by also supporting verbose.
*** Janitor Project ***
This patch also introduces a new macro, ast_verb(), which is similar
to ast_debug(). Setting the per file verbose value only works for messages that
use this macro. Converting existing uses of ast_verbose() can be done like:
if (option_debug > 2)
ast_verbose(VERBOSE_PREFIX_3 "Something useful\n");
...
ast_verb(3, "Something useful\n");
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@76555 65c4cc65-6c06-0410-ace0-fbb531ad65f3
https://origsvn.digium.com/svn/asterisk/branches/1.4
........
r75403 | russell | 2007-07-17 15:01:12 -0500 (Tue, 17 Jul 2007) | 12 lines
(closes issue #10209)
Reported by: juggie
Patches:
10209-trunk-2.patch uploaded by juggie
Tested by: juggie, blitzrage
In ast_pbx_run(), mark a channel as hung up after an application returned -1,
or when it runs out of extensions to execute. This is so that code can detect
that this channel has been hung up for things like making sure DeadAGI is used
on actual dead channels, and is beneficial for other things, like making sure
someone doesn't try to start spying on a channel that is about to go away.
........
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@75404 65c4cc65-6c06-0410-ace0-fbb531ad65f3
for extracting application, function, manager, and agi documentation is the wrong
one to take. The most severe problem is that the output depends on which modules
are loaded as well as compile time options, which both determine which parts are
available.
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@72986 65c4cc65-6c06-0410-ace0-fbb531ad65f3
places that cared about device states were app_queue and the hint code in pbx.c.
The changes include converting it to use the Asterisk event system, as well as
other efficiency improvements.
* app_queue: This module used to register a callback into devicestate.c to
monitor device state changes. Now, it is just a subscriber to Asterisk
events with the type, device state.
* pbx.c hints: Previously, the device state processing thread in devicestate.c
would call ast_hint_state_changed() each time the state of a device changed.
Then, that code would go looking for all the hints that monitor that device,
and call their callbacks. All of this blocked the device state processing
thread. Now, the hint code is a subscriber of Asterisk events with the
type, device state. Furthermore, when this code receives a device state
change event, it queues it up to be processed by another thread so that it
doesn't block one of the event processing threads.
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@66958 65c4cc65-6c06-0410-ace0-fbb531ad65f3
places in the code where the same block of code for creating detached threads
was replicated. (patch from bbryant)
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@65968 65c4cc65-6c06-0410-ace0-fbb531ad65f3
https://origsvn.digium.com/svn/asterisk/branches/1.4
........
r62689 | murf | 2007-05-02 11:10:50 -0600 (Wed, 02 May 2007) | 1 line
a)In chan_zap, set the clid, src fields in channel_alloc call. b)in the channel_alloc func, set the cid_num and name fields from the arglist[blush]. c) don't update the channel app & app data fields if you are in the 'h' extension. d)the load_module func in cdr_radius needs to return DECLINE, SUCCESS.
........
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@62690 65c4cc65-6c06-0410-ace0-fbb531ad65f3
https://origsvn.digium.com/svn/asterisk/branches/1.4
........
r62171 | russell | 2007-04-27 11:14:11 -0500 (Fri, 27 Apr 2007) | 6 lines
If no variables were passed into pbx_substitute_variables_helper_full(), then
don't even bother creating a temporary bogus channel, since that is only for
allowing certain functions to operate on the variables as if they were on a
channel. Most importantly, this fixes a crash.
(issue #9613, reported by callguy, fixed by me)
........
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@62172 65c4cc65-6c06-0410-ace0-fbb531ad65f3
https://origsvn.digium.com/svn/asterisk/branches/1.4
........
r61765 | russell | 2007-04-23 13:17:00 -0500 (Mon, 23 Apr 2007) | 5 lines
Some dialplan functions, such as CUT(), expect to operate on variables on a
channel. So, this little hack lets them work in places where a channel doesn't
exist, such as within DUNDi configuration.
(issue #9465, reported and patched by Corydon76, testing by blitzrage)
........
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@61766 65c4cc65-6c06-0410-ace0-fbb531ad65f3
https://origsvn.digium.com/svn/asterisk/branches/1.4
........
r58931 | russell | 2007-03-15 17:25:12 -0500 (Thu, 15 Mar 2007) | 13 lines
Merge changes from svn/asterisk/team/russell/LaTeX_docs.
* Convert most of the doc directory into a single LaTeX formatted document
so that we can generate a PDF, HTML, or other formats from this
information.
* Add a CLI command to dump the application documentation into LaTeX format
which will only be include if the configure script is run with
--enable-dev-mode.
* The PDF turned out to be close to 1 MB, so it is not included. However, you
can simply run "make asterisk.pdf" to generate it yourself. We may include
it in release tarballs or have automatically generated ones on the web site,
but that has yet to be decided.
........
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@58932 65c4cc65-6c06-0410-ace0-fbb531ad65f3
https://origsvn.digium.com/svn/asterisk/branches/1.4
........
r49742 | qwell | 2007-01-05 18:24:38 -0600 (Fri, 05 Jan 2007) | 7 lines
Save 1 whopping byte of allocated memory!
This looks like it may have been a chicken/egg scenario..
You had to call a cleanup func, because everything was allocated.
Then since you had to call a cleanup func, you were forced to allocate - ie; strdup("").
........
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@49743 65c4cc65-6c06-0410-ace0-fbb531ad65f3
reducing indentation and normalizing loops.
While doing this, remove some unused variables,
fix an uninitialized string (idaction), and mark
some places where the behaviour is not what we would expect
(e.g. an empty context is reported as an error same as
a non-existent one). Given that this function is
not in 1.4, the above can be changed without too many
backward compatibility concerns.
Not applicable to 1.4 or below.
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@48458 65c4cc65-6c06-0410-ace0-fbb531ad65f3
- Document cause codes
- Document a bit more on channel variables - global, predefined and local
- Fix some doxygen in channel.h. Adding one comment for two definitions does not
work. They won't be copied to each.
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@47986 65c4cc65-6c06-0410-ace0-fbb531ad65f3
https://origsvn.digium.com/svn/asterisk/branches/1.4
........
r43803 | qwell | 2006-09-27 12:44:02 -0700 (Wed, 27 Sep 2006) | 4 lines
Fix an issue with PLAYBACKSTATUS not being set under certain circumstances.
Fix a minor issue, to make it use the filenames that were parsed, instead of the entire argument string.
Fix Background() to return -1 like Playback(), if no args are specified.
........
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@43804 65c4cc65-6c06-0410-ace0-fbb531ad65f3
https://origsvn.digium.com/svn/asterisk/branches/1.2
........
r40994 | russell | 2006-08-24 15:41:26 -0400 (Thu, 24 Aug 2006) | 11 lines
Fix a few issues related to the handling of channel variables
- in pbx_builtin_serialize_variables(), the variable list traversal would stop
on a variables with empty name/values, which is not appropriate
- When removing the GROUP variables, use AST_LIST_REMOVE_CURRENT instead of
AST_LIST_REMOVE
- During masquerading, when copying the variables list from one channel to the
other, using AST_LIST_INSERT_TAIL is not valid for appending a whole list.
It leaves the tail pointer of the list invalid. Introduce a new macro,
AST_LIST_APPEND_LIST that appends a list properly.
(issue #7802, softins)
........
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@40995 65c4cc65-6c06-0410-ace0-fbb531ad65f3
- restructured build tree and makefiles to eliminate recursion problems
- support for embedded modules
- support for static builds
- simpler cross-compilation support
- simpler module/loader interface (no exported symbols)
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@40722 65c4cc65-6c06-0410-ace0-fbb531ad65f3
Russell Bryant
Eliel C. Sardanons
Tilghman Lesher
Jeff Peeler
Steve Murphy
Michiel van Baak
Sean Bright
Mark Michelson
Kevin P. Fleming
Matthew Fredrickson
Brett Bryant
Olle Johansson
Joshua Colp
Dwayne M. Hubbard
Jason Parker
Luigi Rizzo
Matt O'Gorman
BJ Weschke