Add an option to enable a periodic beep to be played into a call if it
is being recorded. If enabled, it uses the PERIODIC_HOOK() function
internally to play the 'beep' prompt into the call at a specified
interval. This option is provided for both Monitor() and
MixMonitor().
Review: https://reviewboard.asterisk.org/r/3424/
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@412427 65c4cc65-6c06-0410-ace0-fbb531ad65f3
The failing assertion ensures that the final snapshot gets generated so
CDR records can get finalized. The only place where a channel staging
snapshot flag could be left set is in chan_sip.c:handle_request_bye().
The function could return before clearing the flag because the channel
could dissappear while the function had to have the channel unlocked.
* Fixed handle_request_bye() channel snapshot staging coverage area to not
have a return in the middle of it and be unable to clear the staging flag.
* Pushed the channel snapshot staging coverage area into
ast_rtp_instance_set_stats_vars() to ensure that the staging is not
interrutped.
* Made callers of ast_rtp_instance_set_stats_vars() not call it with any
channels or channel driver private locks held to eliminate the deadlock
potential. The callers must hold references to the passed in channel and
rtp objects.
* Eliminated sip_hangup() trying to get the bridge peer. It is futile at
this point because the channel could never be in a bridge.
Review: https://reviewboard.asterisk.org/r/3431/
........
Merged revisions 412385 from http://svn.asterisk.org/svn/asterisk/branches/12
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@412386 65c4cc65-6c06-0410-ace0-fbb531ad65f3
This patch does the following:
(1) It makes REF_DEBUG a meneselect item. Enabling REF_DEBUG now enables
REF_DEBUG globally throughout Asterisk.
(2) The ref debug log file is now created in the AST_LOG_DIR directory.
Every run will now blow away the previous run (as large ref files
sometimes caused issues). We now also no longer open/close the file
on each write, instead relying on fflush to make sure data gets written
to the file (in case the ao2 call being performed is about to cause a
crash)
(3) It goes with a comma delineated format for the ref debug file. This
makes parsing much easier. This also now includes the thread ID of the
thread that caused ref change.
(4) A new python script instead for refcounting has been added in the
contrib/scripts folder.
(5) The old refcounter implementation in utils/ has been removed.
Review: https://reviewboard.asterisk.org/r/3377/
........
Merged revisions 412114 from http://svn.asterisk.org/svn/asterisk/branches/1.8
........
Merged revisions 412115 from http://svn.asterisk.org/svn/asterisk/branches/11
........
Merged revisions 412153 from http://svn.asterisk.org/svn/asterisk/branches/12
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@412154 65c4cc65-6c06-0410-ace0-fbb531ad65f3
The masquerade supertest frequently fails because either the local channel
chain doesn't completely optimize out or the DTMF handshake doesn't
completely get accross. Local channel optimization requires frames
flowing to trigger when optimization can happen. When optimization
happens the media frame that triggered the optimization is dropped.
Sending DTMF requires frames to flow in the other direction for timing
purposes while sending nothing. If internal timing is not enabled when
MOH is playing, Asterisk switches to received timing when an audio frame
is received. With optimization dropping media frames and MOH not sending
frames unless it receives frames, occasionaly there are no more frames
being passed and the test fails.
* The asterisk command line -I option and the asterisk.conf
internal_timing option are removed. Asterisk now always uses internal
timing when needed if any timing module is loaded. The issue
ASTERISK-14861 did this quite awhile ago in v1.4 but effectively is broken
if other internal timing modules besides DAHDI are used. The
ast_read_generator_actions() now only does received timing if it has no
choice for frame generators like MOH, silence, and playback streaming.
* Cleaned up some code dealing with frame generators in
ast_deactivate_generator(), generator_write_format_change(),
ast_activate_generator(), and ast_channel_stop_silence_generator().
* Removed ast_internal_timing_enabled(), AST_OPT_FLAG_INTERNAL_TIMING, and
ast_opt_internal_timing.
ASTERISK-22846 #close
Reported by: Matt Jordan
Review: https://reviewboard.asterisk.org/r/3414/
........
Merged revisions 411715 from http://svn.asterisk.org/svn/asterisk/branches/1.8
........
Merged revisions 411716 from http://svn.asterisk.org/svn/asterisk/branches/11
........
Merged revisions 411717 from http://svn.asterisk.org/svn/asterisk/branches/12
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@411724 65c4cc65-6c06-0410-ace0-fbb531ad65f3
This commit contains several changes to sorcery:
1) Application of sorcery configuration based on module name is automatically performed
when sorcery is opened for a module.
2) Sorcery will not attempt to apply the same wizard to an object type more than once.
3) Sorcery gives more exact results when attempting to apply a wizard, whether as the
default or based on configuration.
Sorcery unit tests still pass for me after making these changes.
Review: https://reviewboard.asterisk.org/r/3326
........
Merged revisions 411159 from http://svn.asterisk.org/svn/asterisk/branches/12
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@411656 65c4cc65-6c06-0410-ace0-fbb531ad65f3
This patch adds the following:
(1) A new module, res_hep, which implements a generic packet capture agent for
the Homer Encapsulation Protocol (HEP) version 3. Note that this code is based
on a patch provided by Alexandr Dubovikov; I basically just wrapped it up,
added configuration via the configuration framework, and threw in a
taskprocessor.
(2) A new module, res_hep_pjsip, which forwards all SIP message traffic that
passes through the res_pjsip stack over to res_hep for encapsulation and
transmission to a HEPv3 capture server.
Much thanks to Alexandr for his Asterisk patch for this code and for a *lot*
of patience waiting for me to port it to 12/trunk. Due to some dithering on
my part, this has taken the better part of a year to port forward (I still
blame CDRs for the delay).
ASTERISK-23557 #close
Review: https://reviewboard.asterisk.org/r/3207/
........
Merged revisions 411534 from http://svn.asterisk.org/svn/asterisk/branches/12
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@411556 65c4cc65-6c06-0410-ace0-fbb531ad65f3
This patch does the following:
* It updates the AMI version to 2.2.0 to indicate backwards compatible
changes have been made since the last release
* It updates the ARI version to 1.2.0 to indicate backwards compatible
changes have been made since the last release
* It updates the UPGRADE/CHANGES files with changes that were not
mentioned
........
Merged revisions 411529 from http://svn.asterisk.org/svn/asterisk/branches/12
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@411530 65c4cc65-6c06-0410-ace0-fbb531ad65f3
* Fixed bad use of ao2_find() in on_endpoint().
* Replaced use of find_endpoints() with find_an_endpoint() since only the
first found endpoint is ever needed.
* Fixed qualify_contact_cb() to update the contact with the aor
authenticate_qualify setting. Otherwise, permanent contacts in the aor
type sections would have a config line order dependancy.
* Fixed off nominal path contact ref leak in qualify_contact(). The
comment saying the unref is not needed was wrong.
* Fixed off nominal path use of the endpoint parameter if it is NULL in
send_out_of_dialog_request().
* Added missing off nominal path unref of pjsip tdata in
send_out_of_dialog_request().
* Fixed off nominal path failing to call the callback in send_request_cb()
when the request is challenged for authentication.
* Eliminated silly RAII_VAR() use in qualify_contact_cb().
* Updated ast_sip_send_request() doxygen to better reflect reality.
(closes issue ASTERISK-23254)
Reported by: rmudgett
Review: https://reviewboard.asterisk.org/r/3381/
........
Merged revisions 411141 from http://svn.asterisk.org/svn/asterisk/branches/12
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@411142 65c4cc65-6c06-0410-ace0-fbb531ad65f3
* Fix memory leak in ast_unreal_new_channels(). Made it generate the ;2
uniqueid on a stack variable instead of mallocing it.
* Made send error response to ARI and AMI requests instead of just logging
excessive uniqueid length and allowing truncation. action_originate() and
ari_channels_handle_originate_with_id().
* Fixed minor truncating uniqueid hole when generating the ;2 uniqueid
string length. Created public and internal lengths of uniqueid. The
internal length can handle a max public uniqueid plus an appended ;2.
* free() and ast_free() are NULL tolerant so they don't need a NULL test
before calling.
* Made use better struct initialization format instead of the position
dependent initialization format. Also anything not explicitly initialized
in the struct is initialized to zero by the compiler.
* Made ast_channel_internal_set_fake_ids() use the safer
ast_copy_string() instead of strncpy().
Review: https://reviewboard.asterisk.org/r/3371/
........
Merged revisions 410949 from http://svn.asterisk.org/svn/asterisk/branches/12
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@410950 65c4cc65-6c06-0410-ace0-fbb531ad65f3
This change enables DNS client support within PJSIP. System
nameservers are automatically discovered using res_init or
res_ninit. If this fails then PJSIP will resort to using
gethostbyname for resolution.
By enabling this support we gain SRV support, failover, and
weight support.
(closes issue ASTERISK-23435)
Reported by: Matt Jordan
Review: https://reviewboard.asterisk.org/r/3343/
........
Merged revisions 410795 from http://svn.asterisk.org/svn/asterisk/branches/12
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@410796 65c4cc65-6c06-0410-ace0-fbb531ad65f3
Playing back a file to a channel in an ARI bridge would attempt to wait until
the playback concluded before returning. The method used involved signaling the
waiting thread in the ARI custom playback function.
The problem with this is that there were some corner cases that were not accounted for:
* If a bridge channel could not be found, then we never would attempt the playback but
would still attempt to wait for the playback to complete.
* If the bridge playfile action failed to queue, we would still attempt to wait for the
playback to complete.
* If the bridge playfile action were queued but some circumstance caused the playback
not to occur (the bridge dies, the channel is removed from the bridge), then we would
never be notified.
The solution to this is to move the waiting logic into the bridge code. A new bridge
API function is added to queue a synchronous action on a bridge. The waiting thread
is notified when the queued frame has been freed, either due to an error occurring
or due to successful playback. As a failsafe, the waiting thread has a 10 minute
timeout just in case there is a frame leak somewhere.
Review: https://reviewboard.asterisk.org/r/3338
........
Merged revisions 410673 from http://svn.asterisk.org/svn/asterisk/branches/12
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@410684 65c4cc65-6c06-0410-ace0-fbb531ad65f3
There were a number of instances in this header file where "function all" was
intended to be "function call". This patch fixes that up.
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@410639 65c4cc65-6c06-0410-ace0-fbb531ad65f3
Created the 'pjsip show channel' and 'pjsip show contact' commands.
Refactored out the hated ast_hashtab. Replaced with ao2_container.
Cleaned up function naming. Internal only, no public name changes.
Cleaned up whitespace and brace formatting in cli code.
Changed some NULL checking from "if"s to ast_asserts.
Fixed some register/unregister ordering to reduce deadlock potential.
Fixed ast_sip_location_add_contact where the 'name' buffer was too short.
Fixed some self-assignment issues in res_pjsip_outbound_registration.
(closes issue ASTERISK-23276)
Review: http://reviewboard.asterisk.org/r/3283/
........
Merged revisions 410287 from http://svn.asterisk.org/svn/asterisk/branches/12
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@410288 65c4cc65-6c06-0410-ace0-fbb531ad65f3
In order to prevent confusion over the allow and disallow
list of codecs being the same an option for registering a
field as an alias is added. The alias field will be read
from the configuration file, but afterwards is not listed
as a known field. With disallow set as an alias, the CLI
command pjsip show endpoint # will list the allow= field,
but not the disallow field.
(closes issue ASTERISK-23092)
Review: https://reviewboard.asterisk.org/r/3193/
........
Merged revisions 410190 from http://svn.asterisk.org/svn/asterisk/branches/12
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@410191 65c4cc65-6c06-0410-ace0-fbb531ad65f3
A stasis cache entry now contains more than a single message/snapshot. It
contains messages/snapshots for the local entity as well as any remote
entities that post to the cached item. In addition callbacks can be
supplied when the cache is created to compute and post the aggregate
message/snapshot representing all entities stored in the cache entry.
* All stasis messages now have an eid to indicate what entity posted it.
* The stasis cache enhancements allow device state to cache and aggregate
the device states from local and remote entities in a single operation.
The cached aggregate device state is available immediately after it is
posted to the stasis bus. This improves performance by eliminating a
cache dump and associated ao2 container traversals to calculate the
aggregate state.
(closes issue ASTERISK-23204)
Reported by: Mark Michelson
Review: https://reviewboard.asterisk.org/r/3281/
........
Merged revisions 410184 from http://svn.asterisk.org/svn/asterisk/branches/12
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@410185 65c4cc65-6c06-0410-ace0-fbb531ad65f3
Much needed was a way to assign id to objects on creation, and
much change was necessary to accomplish it. Channel uniqueids
and linkedids are split into separate string and creation time
components without breaking linkedid propgation. This allowed
the uniqueid to be specified by the user interface - and those
values are now carried through to channel creation, adding the
assignedids value to every function in the chain including the
channel drivers. For local channels, the second channel can be
specified or left to default to a ;2 suffix of first. In ARI,
bridge, playback, and snoop objects can also be created with a
specified uniqueid.
Along the way, the args order to allocating channels was fixed
in chan_mgcp and chan_gtalk, and linkedid is no longer lost as
masquerade occurs.
(closes issue ASTERISK-23120)
Review: https://reviewboard.asterisk.org/r/3191/
........
Merged revisions 410157 from http://svn.asterisk.org/svn/asterisk/branches/12
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@410158 65c4cc65-6c06-0410-ace0-fbb531ad65f3
This patch creates the AST_SORCERY dialplan function which allows someone to
retrieve any value from a sorcery-based config file. It's similar to
AST_CONFIG.
The creation of the function itself was fairly straightforward but it required
changes to the underlying sorcery infrastructure that rippled into individual
sorcery objects. The changes stemmed from inconsistencies in how sorcery
created ast_variable objectsets from sorcery objects and the inconsistency
in how individual objects used that feature especially when it came to
parameters that can be specified multiple times like contact in aor and match
in identify. You can read more here...
http://lists.digium.com/pipermail/asterisk-dev/2014-February/065202.html
So, what this patch does, besides actually creating the AST_SORCERY function,
is the following...
* Creates ast_variable_list_append which is a helper to append one ast_variable
list to another.
* Modifies the ast_sorcery_object_field_register functions to accept the
already-defined sorcery_fields_handler callback.
* Modifies ast_sorcery_objectset_create to accept a parameter indicating return
type preference...a single ast_variable with all values concatenated or an
ast_variable list with multiple entries. Also fixed a few bugs.
* Modifies individual sorcery object implementations to use the new function
definition of the ast_sorcery_object_field_register functions.
* Modifies location.c and res_pjsip_endpoint_identifier_ip.c to implement
sorcery_fields_handler handlers so they return multiple occurrences as an
ast_variable_list.
* Added a whole bunch of tests to test_sorcery.
(closes issue ASTERISK-22537)
Review: http://reviewboard.asterisk.org/r/3254/
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@410042 65c4cc65-6c06-0410-ace0-fbb531ad65f3
Transport TOS values were interpreted as DSCP values without being documented
as such. Endpoint TOS values (tos_audio/tos_video) behaved normally as TOS
values have historically. This patch makes the transport TOS values behave as
TOS values and makes all TOS values readable as string values (e.g. AF11).
In addition, alembic scripts have been updated to use the proper field types
for all TOS/COS values.
(issue ASTERISK-23235)
Reported by: George Joseph
Review: https://reviewboard.asterisk.org/r/3304/
........
Merged revisions 410028 from http://svn.asterisk.org/svn/asterisk/branches/12
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@410029 65c4cc65-6c06-0410-ace0-fbb531ad65f3
* Fixed off-nominal json ref counting issue with using the following API
calls: ast_json_object_set() and ast_json_array_append().
* Fixed off-nominal error reporting in ast_ari_endpoints_list().
* Fixed some miscellaneous off-nominal json ref counting issues in
report_receive_fax_status() and dial_to_json().
........
Merged revisions 408713 from http://svn.asterisk.org/svn/asterisk/branches/12
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@408714 65c4cc65-6c06-0410-ace0-fbb531ad65f3
In order to retrieve an arbitrary sorcery instance from a dialplan function
(or any place else) there needs to be a registry of sorcery instances.
ast_sorcery_init now creates a hashtab as a registry.
ast_sorcery_open now checks the hashtab for an existing sorcery instance
matching the caller's module name. If it finds one, it bumps the
refcount and returns it. If not, it creates a new sorcery instance,
adds it to the hashtab, then returns it.
ast_sorcery_retrieve_by_module_name is a new function that does a hashtab
lookup by module name. It can be called by the future dialplan function.
res_pjsip/config_system needed a small change to share the main res_pjsip
sorcery instance.
tests/test_sorcery was updated to include a test for the registry.
(closes issue ASTERISK-22537)
Review: http://reviewboard.asterisk.org/r/3184/
........
Merged revisions 408518 from http://svn.asterisk.org/svn/asterisk/branches/12
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@408519 65c4cc65-6c06-0410-ace0-fbb531ad65f3
This change allows timing implementation data to be stored directly
on the timer itself thus removing the requirement for many
implementations to do a container lookup for the same information.
This means that API calls into timing implementations can directly
access the information they need instead of having to find it.
Review: https://reviewboard.asterisk.org/r/3175/
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@407749 65c4cc65-6c06-0410-ace0-fbb531ad65f3
Establishing an IAX2 call between Asterisk v1.4 and v1.8 (or later)
results in an unexpected call disconnect. The problem happens because
newer values in the enum ast_control_frame_type are not consistent between
the branch versions of Asterisk.
For example:
1) v1.4 calls v1.8 (or later) using IAX2
2) v1.8 answers and sends a connected line update control frame. (on v1.8
AST_CONTROL_CONNECTED_LINE = 22)
3) v1.4 receives the control frame as an end-of-q (on v1.4
AST_CONTROL_END_OF_Q = 22)
4) v1.4 disconnects the call once the receive queue becomes empty.
Several things are done by this patch to fix the problem and attempt to
prevent it from happening again in the future:
* Added a warning at the definition of enum ast_control_frame_type about
how to add new control frame values.
* Made block sending and receiving control frames that have no reason to
go over the wire.
* Extended the connectedline iax.conf parameter to also include the
redirecting information updates.
* Updated the connectedline iax.conf parameter documentation to include a
notice that the parameter must be "no" when the peer is an Asterisk v1.4
instance.
(closes issue AST-1302)
Review: https://reviewboard.asterisk.org/r/3174/
........
Merged revisions 407678 from http://svn.asterisk.org/svn/asterisk/branches/1.8
........
Merged revisions 407727 from http://svn.asterisk.org/svn/asterisk/branches/11
........
Merged revisions 407729 from http://svn.asterisk.org/svn/asterisk/branches/12
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@407731 65c4cc65-6c06-0410-ace0-fbb531ad65f3
* Adds identify, transport, and registration support to the PJSIP CLI.
* Creates three additional callbacks, one for an iterator, one for a
comparator, and one for a container. This eliminates the link dependency
from higher level modules to lower level ones.
* Eliminates duplicate sorting in PJSIP CLI commands.
* Cleans up PJSIP CLI output formatting.
* Pushes CLI command registration down to the implementing source file.
* Adds several ast_sip_destroy_sorcery functions to complement existing
ast_sip_sorcery_initialize functions. The destroy functions unregister
PJSIP CLI commands and PJSIP CLI formatters.
Reported by: George Joseph
Review: https://reviewboard.asterisk.org/r/3104/
........
Merged revisions 407568 from http://svn.asterisk.org/svn/asterisk/branches/12
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@407573 65c4cc65-6c06-0410-ace0-fbb531ad65f3
When the PJSIP pubsub framework was created, subscription handlers were required
to state what event they handled along with what body types they knew how to
generate. While this serves well when implementing a base RFC, it has problems
when trying to extend the body to support non-standard or proprietary body
elements. The code also was NOTIFY-specific, meaning that when the time comes
that we start writing code to send out PUBLISH requests with MWI or presence
bodies, we would likely find ourselves duplicating code that had previously been
written.
This changeset introduces the concept of body generators and body supplements. A
body generator is responsible for allocating a native structure for a given body
type, providing the primary body content, converting the native structure to a
string, and deallocating resources. A body supplement takes the primary body
content (the native structure, not a string) generated by the body generator and
adds nonstandard elements to the body. With these elements living in their own
module, it becomes easy to extend our support for body types and to re-use
resources when sending a PUBLISH request.
Body generators and body supplements register themselves with the pubsub core,
similar to how subscription and publish handlers had done. Now, subscription
handlers do not need to know what type of body content they generate, but they
still need to inform the pubsub core about what the default body type for a
given event package is. The pubsub core keeps track of what body generators and
body supplements have been registered. When a SUBSCRIBE arrives, the pubsub core
will check that there is a subscription handler for the event in the SUBSCRIBE,
then it will check that there is a body generator that can provide the content
specified in the Accept header(s).
Because of the nature of body generators and supplements, it means
res_pjsip_exten_state and res_pjsip_mwi have been completely gutted. They no
longer worry about body types, instead calling
ast_sip_pubsub_generate_body_content() when they need to generate a NOTIFY body.
Review: https://reviewboard.asterisk.org/r/3150
........
Merged revisions 407016 from http://svn.asterisk.org/svn/asterisk/branches/12
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@407030 65c4cc65-6c06-0410-ace0-fbb531ad65f3
On some systems the values for INFINITY and NAN are not defined thus causing
a build error on those systems. Added definitions for those if they had
not previously been defined.
(closes issue ASTERISK-23056)
Reported by: capouch
Patches:
inf-nan-patch.txt uploaded by capouch (license 6564)
........
Merged revisions 406788 from http://svn.asterisk.org/svn/asterisk/branches/12
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@406789 65c4cc65-6c06-0410-ace0-fbb531ad65f3
This change adds improvements to support for allow=all in
pjsip.conf so that it functions as intended. Previously,
the allow/disallow socery configuration would set & clear
codecs from the media.codecs and media.prefs list, but if
all was specified the prefs list was not updated. Then a
call would fail when create_outgoing_sdp_stream() created
an SDP with no audio codecs.
A new function ast_codec_pref_append_all() is provided to
add all codecs to the prefs list - only those not already
on the list. This enables the configuration to specify a
codec preference, but still add all codecs, and even then
remove some codecs, as shown in this example:
allow = ulaw, alaw, all, !g729, !g723
Also, the display order of allow in cli output is updated
to match the configuration by using prefs instead of caps
when generating a human readable string.
Finally, a change to create_outgoing_sdp_stream() skips a
codec when it does not have a payload code instead of the
call failing.
(closes issue ASTERISK-23018)
Reported by: xrobau
Review: https://reviewboard.asterisk.org/r/3131/
........
Merged revisions 405875 from http://svn.asterisk.org/svn/asterisk/branches/12
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@405876 65c4cc65-6c06-0410-ace0-fbb531ad65f3
This adds Path support to chan_pjsip in res_pjsip_path.c with minimal
additions in res_pjsip_registrar.c to store the path and additions in
res_pjsip_outbound_registration.c to enable advertisement of path
support to registrars and intervening proxies.
Path information is stored on contacts and is enabled via Address of
Record (AoRs) and Registration configuration sections.
While adding path support, it became necessary to be able to add SIP
supplements that handled messages outside of sessions, so a framework
for handling these types of hooks was added in parallel to the
already-existing session supplements and several senders of
out-of-dialog requests were refactored as a result.
(closes issue ASTERISK-21084)
Review: https://reviewboard.asterisk.org/r/3050/
........
Merged revisions 405565 from http://svn.asterisk.org/svn/asterisk/branches/12
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@405566 65c4cc65-6c06-0410-ace0-fbb531ad65f3
Adds the following AMI commands:
PUT mailboxes/mailboxName
modifies mailbox state and implicitly creates new mailboxes
GET mailboxes/mailboxName
retrieves a JSON representation of a single mailbox if it exists
GET mailboxes
retrieves a JSON array of all mailboxes
DELETE mailbox/mailboxName
deletes a mailbox
Note that res_mwi_external must be loaded for these functions to
actually do anything.
Review: https://reviewboard.asterisk.org/r/3117/
........
Merged revisions 405553 from http://svn.asterisk.org/svn/asterisk/branches/12
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@405554 65c4cc65-6c06-0410-ace0-fbb531ad65f3
The per console verbose level feature as previously implemented caused a
large performance penalty. The fix required some minor incompatibilities
if the new rasterisk is used to connect to an earlier version. If the new
rasterisk connects to an older Asterisk version then the root console
verbose level is always affected by the "core set verbose" command of the
remote console even though it may appear to only affect the current
console. If an older version of rasterisk connects to the new version
then the "core set verbose" command will have no effect.
* Fixed the verbose performance by not generating a verbose message if
nothing is going to use it and then filtered any generated verbose
messages before actually sending them to the remote consoles.
* Split the "core set debug" and "core set verbose" CLI commands to remove
the per module verbose support that cannot work with the per console
verbose level.
* Added a silent option to the "core set verbose" command.
* Fixed "core set debug off" tab completion.
* Made "core show settings" list the current console verbosity in addition
to the root console verbosity.
* Changed the default verbose level of the 'verbose' setting in the
logger.conf [logfiles] section. The default is now to once again follow
the current root console level. As a result, using the AMI Command action
with "core set verbose" could again set the root console verbose level and
affect the verbose level logged.
(closes issue AST-1252)
Reported by: Guenther Kelleter
Review: https://reviewboard.asterisk.org/r/3114/
........
Merged revisions 405431 from http://svn.asterisk.org/svn/asterisk/branches/11
........
Merged revisions 405432 from http://svn.asterisk.org/svn/asterisk/branches/12
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@405436 65c4cc65-6c06-0410-ace0-fbb531ad65f3
This change fixes a few memory leaks that were found based
on a mailing list post.
1. Some JSON response messages were never freed. This was
caused by the documentation stating that message references
were stolen when in reality they were not. The code now follows
the documentation and usage has been updated.
2. HTTP response headers were never freed.
3. The variable list for wildcards paths was never freed.
(closes issue ASTERISK-23128)
Reported by: Kenneth Watson (on list)
Review: https://reviewboard.asterisk.org/r/3119/
........
Merged revisions 405325 from http://svn.asterisk.org/svn/asterisk/branches/12
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@405326 65c4cc65-6c06-0410-ace0-fbb531ad65f3
In https://reviewboard.asterisk.org/r/3057/, applications and functions that
manipulate CDRs were made to interact over Stasis. This was done to
synchronize manipulations of CDRs from the dialplan with the updates the
engine itself receives over the message bus.
This change rested on a faulty premise: that messages published to the CDR
topic or to a topic that forwards to the CDR topic are synchronized with the
messages handled by the CDR topic subscription in the CDR engine. This is not
the case. There is no ordering guaranteed for two messages published to the
same topic; ordering is only guaranteed if a message is published to the same
subscriber.
Stasis was modified in r405311 to allow a publisher to synchronize on the
subscriber. This patch uses that API to synchronize the CDR publishers with
the CDR engine message router, which maintains the overall topic subscription.
(closes issue ASTERISK-22884)
Reported by: Matt Jordan
Review: https://reviewboard.asterisk.org/r/3099/
........
Merged revisions 405312 from http://svn.asterisk.org/svn/asterisk/branches/12
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@405314 65c4cc65-6c06-0410-ace0-fbb531ad65f3
This patch adds an API call to Stasis that allows a publisher to publish a
stasis message that will not return until a specific subscriber handles the
message. Since a subscriber can have their own forwarding topic which orders
messages from many topics, this allows a publisher who knows of that subscriber
to synchronize to that subscriber regardless of the forwarding relationships
between topics.
This is of particular use for dialplan applications that need to synchronize
on a particular subscriber's handling of a message.
(issue ASTERISK-22884)
Reported by: Matt Jordan
Review: https://reviewboard.asterisk.org/r/3099/
........
Merged revisions 405311 from http://svn.asterisk.org/svn/asterisk/branches/12
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@405313 65c4cc65-6c06-0410-ace0-fbb531ad65f3
* The core external MWI resource provides for MWI message counts
persistence using sorcery. With sorcery, the user is able to configure
which sorcery wizzard backend to use if the default astdb is not desired.
* The core external MWI resoruce provides some debugging CLI commands
enabled by defining MWI_DEBUG_CLI.
The debugging CLI commands are:
"mwi delete all",
"mwi delete like <regex>",
"mwi delete mailbox <mailbox>",
"mwi list all",
"mwi list like <regex>",
"mwi show mailbox <mailbox>", and
"mwi update mailbox <mailbox> [<new> [<old>]]".
(closes issue AFS-43)
Review: https://reviewboard.asterisk.org/r/3061/
........
Merged revisions 404952 from http://svn.asterisk.org/svn/asterisk/branches/12
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@404953 65c4cc65-6c06-0410-ace0-fbb531ad65f3
Implements the following cli commands:
pjsip list aors
pjsip list auths
pjsip list channels
pjsip list contacts
pjsip list endpoints
pjsip show aor(s)
pjsip show auth(s)
pjsip show channels
pjsip show endpoint(s)
Also...
Minor modifications made to the AMI command implementations to facilitate
reuse.
New function ast_variable_list_sort added to config.c and config.h to implement
variable list sorting.
(issue ASTERISK-22610)
patches:
pjsip_cli_v2.patch uploaded by george.joseph (License 6322)
........
Merged revisions 404480 from http://svn.asterisk.org/svn/asterisk/branches/12
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@404507 65c4cc65-6c06-0410-ace0-fbb531ad65f3
AMI has received substantial updates over the past year. Not only has the
syntax been vastly improved and made consistent (which entails many event
changes), but the underlying things that those events convey have changed
substantially as well.
After some conversation in #asterisk-dev, it was agreed that this is a good
time to jump to 2.
At the same time, since ARI will most likely use semantic versioning, we
might as well use that for AMI as well. That also affords us greater meaning
for the AMI version.
........
Merged revisions 404421 from http://svn.asterisk.org/svn/asterisk/branches/12
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@404433 65c4cc65-6c06-0410-ace0-fbb531ad65f3
For the explanation, here is a copy-paste of the review board explanation:
Initially, it was discovered that performing an attended transfer of a
multiparty bridge with a PJSIP channel would cause a deadlock. A PBX thread
started a masquerade and reached the point where it was calling the fixup()
callback on the "original" channel. For chan_pjsip, this involves pushing a
synchronous task to the session's serializer. The problem was that a task ahead
of the fixup task was also attempting to perform a channel masquerade. However,
since masquerades are designed in a way to only allow for one to occur at a
time, the task ahead of the fixup could not continue until the masquerade
already in progress had completed. And of course, the masquerade in progress
could not complete until the task ahead of the fixup task had completed.
Deadlock.
The initial fix was to change the fixup task to be asynchronous. While this
prevented the deadlock from occurring, it had the frightful side effect of
potentially allowing for tasks in the session's serializer to operate on a
zombie channel.
Taking a step back from this particular deadlock, it became clear that the
problem was not really this one particular issue but that masquerades
themselves needed to be addressed. A PJSIP attended transfer operation calls
ast_channel_move(), which attempts to both set up and execute a masquerade. The
problem was that after it had set up the masquerade, the PBX thread had swooped
in and tried to actually perform the masquerade. Looking at changes that had
been made to Asterisk 12, it became clear that there never is any time now that
anyone ever wants to set up a masquerade and allow for the channel thread to
actually perform the masquerade. Everyone always is calling ast_channel_move(),
performs the masquerade itself before returning.
In this patch, I have removed all blocks of code from channel.c that will
attempt to perform a masquerade if ast_channel_masq() returns true. Now, there
is no distinction between setting up a masquerade and performing the
masquerade. It is one operation. The only remaining checks for
ast_channel_masq() and ast_channel_masqr() are in ast_hangup() since we do not
want to interrupt a masquerade by hanging up the channel. Instead, now
ast_hangup() will wait for a masquerade to complete before moving forward with
its operation.
The ast_channel_move() function has been modified to basically in-line the
logic that used to be in ast_channel_masquerade(). ast_channel_masquerade() has
been killed off for real. ast_channel_move() now has a lock associated with it
that is used to prevent any simultaneous moves from occurring at once. This
means there is no need to make sure that ast_channel_masq() or
ast_channel_masqr() are already set on a channel when ast_channel_move() is
called. It also means the channel container lock is not pulling double duty by
both keeping the container locked and preventing multiple masquerades from
occurring simultaneously.
The ast_do_masquerade() function has been renamed to do_channel_masquerade()
and is now internal to channel.c. The function now takes explicit arguments of
which channels are involved in the masquerade instead of a single channel.
While it probably is possible to do some further refactoring of this method, I
feel that I would be treading dangerously. Instead, all I did was change some
comments that no longer are true after this changeset.
The other more minor change introduced in this patch is to res_pjsip.c to make
ast_sip_push_task_synchronous() run the task in-place if we are already a SIP
servant thread. This is related to this patch because even when we isolate the
channel masquerade to only running in the SIP servant thread, we would still
deadlock when the fixup() callback is reached since we would essentially be
waiting forever for ourselves to finish before actually running the fixup. This
makes it so the fixup is run without having to push a task into a serializer at
all.
(closes issue ASTERISK-22936)
Reported by Jonathan Rose
Review: https://reviewboard.asterisk.org/r/3069
........
Merged revisions 404356 from http://svn.asterisk.org/svn/asterisk/branches/12
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@404368 65c4cc65-6c06-0410-ace0-fbb531ad65f3
This change is in preparation for external MWI support.
Removed code from the system for normal mailbox handling that appends
@default to the mailbox identifier if it does not have a context. The
only exception is the legacy hasvoicemail users.conf option. The legacy
option will only work for app_voicemail mailboxes. The system cannot make
any assumptions about the format of the mailbox identifer used by
app_voicemail.
chan_sip and chan_dahdi/sig_pri had the most changes because they both
tried to interpret the mailbox identifier. chan_sip just stored and
compared the two components. chan_dahdi actually used the box
information.
The ISDN MWI support configuration options had to be reworked because
chan_dahdi was parsing the box@context format to get the box number. As a
result the mwi_vm_boxes chan_dahdi.conf option was added and is documented
in the chan_dahdi.conf.sample file.
Review: https://reviewboard.asterisk.org/r/3072/
........
Merged revisions 404348 from http://svn.asterisk.org/svn/asterisk/branches/12
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@404350 65c4cc65-6c06-0410-ace0-fbb531ad65f3
When doing the rework of the CDR engine that pushed all of the logic into cdr.c
and made it respond to changes in channel state over Stasis, we knew that
accessing the CDR engine from the dialplan would be "slightly"
non-deterministic. Dialplan threads would be accessing CDRs while Stasis
threads would be updating the state of said CDRs - whereas in the past,
everything happened on the dialplan threads. Tests have shown that "slightly"
is in reality "very".
This patch synchronizes things by making the dialplan applications/functions
that manipulate CDRs do so over Stasis. ForkCDR, NoCDR, ResetCDR, CDR, and
CDR_PROP now all use Stasis to send their requests over to the CDR engine,
and synchronize on the channel Stasis topic via a subscription so that they
return their values/control to the dialplan at the appropriate time.
While going through this, the following changes were also made:
* DISA, which can reset the CDR when a user successfully authenticates, now
just uses the ResetCDR app to do this. This prevents having to duplicate
the same Stasis synchronization logic in that application.
* Answer no longer disables CDRs. It actually didn't work anyway - calling
DISABLE on the channel's CDR doesn't stop the CDR from getting the Answer
time - it just kills all CDRs on that channel, which isn't what the caller
would intend.
(closes issue ASTERISK-22884)
(closes issue ASTERISK-22886)
Review: https://reviewboard.asterisk.org/r/3057/
........
Merged revisions 404294 from http://svn.asterisk.org/svn/asterisk/branches/12
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@404295 65c4cc65-6c06-0410-ace0-fbb531ad65f3
Original commit message by mmichelson (asterisk 12 r403311):
"This adds channel locks around calls to create channel snapshots as well
as other functions which operate on a channel and then end up
creating a channel snapshot. Functions that expect the channel to be
locked prior to being called have had their documentation updated to
indicate such."
The above was initially committed and then reverted at r403398. The problem
was found to be in core_local.c in the publish_local_bridge_message function.
The ast_unreal_lock_all function locks and adds a reference to the returned
channels and while they were being unlocked they were not being unreffed when
no longer needed. Fixed by unreffing the channels.
Also in bridge.c a lock was obtained on "other->chan", but then an attempt was
made to unlock "other" and not the previously locked channel. Fixed by
unlocking "other->chan"
(closes issue ASTERISK-22709)
Reported by: John Bigelow
........
Merged revisions 404237 from http://svn.asterisk.org/svn/asterisk/branches/12
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@404260 65c4cc65-6c06-0410-ace0-fbb531ad65f3
Bridges have two new optional properties, a creator and a name.
Certain consumers of bridges will automatically provide bridges that
they create with these properties. Examples include app_bridgewait,
res_parking, app_confbridge, and app_agent_pool. In addition, a name
may now be provided as an argument to the POST function for creating
new bridges via ARI.
(closes issue AFS-47)
Review: https://reviewboard.asterisk.org/r/3070/
........
Merged revisions 404042 from http://svn.asterisk.org/svn/asterisk/branches/12
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@404043 65c4cc65-6c06-0410-ace0-fbb531ad65f3
This patch allows individual dialplan functions to be marked as
'dangerous', to inhibit their execution from external sources.
A 'dangerous' function is one which results in a privilege escalation.
For example, if one were to read the channel variable SHELL(rm -rf /)
Bad Things(TM) could happen; even if the external source has only read
permissions.
Execution from external sources may be enabled by setting
'live_dangerously' to 'yes' in the [options] section of asterisk.conf.
Although doing so is not recommended.
Also, the ABI was changed to something more reasonable, since Asterisk
12 does not yet have a public release.
(closes issue ASTERISK-22905)
Review: http://reviewboard.digium.internal/r/432/
........
Merged revisions 403913 from http://svn.asterisk.org/svn/asterisk/branches/1.8
........
Merged revisions 403917 from http://svn.asterisk.org/svn/asterisk/branches/11
........
Merged revisions 403959 from http://svn.asterisk.org/svn/asterisk/branches/12
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@403960 65c4cc65-6c06-0410-ace0-fbb531ad65f3
This change adds an event for when an originated call is redirected to
another target. This event contains the original channel and the newly
created channel. If a stasis subscription exists on the original originated
channel for a stasis application then a new subscription will also be
created on the stasis application to the redirected channel. This allows
the application to follow the call path completely.
(closes issue ASTERISK-22719)
Reported by: Joshua Colp
Review: https://reviewboard.asterisk.org/r/3054/
........
Merged revisions 403808 from http://svn.asterisk.org/svn/asterisk/branches/12
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@403810 65c4cc65-6c06-0410-ace0-fbb531ad65f3
There were still a few cases in which ATTENDEDTRANSFER and BLINDTRANSFER
wouldn't be set on channels involved with blind and attended transfers.
This would happen with features that were initialized by channel driver
specific mechanisms in multiparty calls. This patch resolves those cases
while attempted to keep the behavior for setting those variables as
consistent as possible.
(closes issue AFS-24)
Review: https://reviewboard.asterisk.org/r/3040/
........
Merged revisions 403781 from http://svn.asterisk.org/svn/asterisk/branches/12
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@403783 65c4cc65-6c06-0410-ace0-fbb531ad65f3
The change contains a slightly adjusted patch that was on the issue
(submitted by kmoore). A fix was made by adding in a bridge lock
while calling bridge_start/stop from the framehook callback. Since
the framehook callback is not called from the bridging core the bridge
is not locked, but needs to be before calling bridge_start.
(closes issue ASTERISK-22749)
Reported by: Kinsey Moore
Review: https://reviewboard.asterisk.org/r/3066/
Patches:
lock_inversion.diff uploaded by kmoore (license 6273)
........
Merged revisions 403767 from http://svn.asterisk.org/svn/asterisk/branches/12
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@403768 65c4cc65-6c06-0410-ace0-fbb531ad65f3
Added the ability to have rules that are checked when adding and/or removing
channels to/from a bridge. In this case, if a channel is currently recording
and someone attempts to add it to a bridge an "is recording" rule is checked,
fails, and a 409 conflict is returned.
Also command functions now return an integer value that can be descriptive of
what kind of problems, if any, occurred before or during execution.
(closes issue ASTERISK-22624)
Reported by: Joshua Colp
Review: https://reviewboard.asterisk.org/r/2947/
........
Merged revisions 403749 from http://svn.asterisk.org/svn/asterisk/branches/12
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@403750 65c4cc65-6c06-0410-ace0-fbb531ad65f3
In some cases messages need to be sent to a direct URI (sip:<ip address>). This
patch adds in that support by using a default outbound endpoint. When sending
messages, if no endpoint can be found then the default one is used.
To facilitate this a new default_outbound_endpoint option was added to the
globals section for pjsip.conf.
Review: https://reviewboard.asterisk.org/r/2944/
........
Merged revisions 403680 from http://svn.asterisk.org/svn/asterisk/branches/12
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@403687 65c4cc65-6c06-0410-ace0-fbb531ad65f3
* The voicemail registration/unregistration functions now take a struct of
callbacks instead of a lengthy parameter list of callbacks.
* The voicemail registration/unregistration functions now prevent a
competing module from interfering with an already registered callback
supplying module.
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@403643 65c4cc65-6c06-0410-ace0-fbb531ad65f3
This patch adds CHANNEL read support for chan_pjsip. This allows the dialplan
to use the CHANNEL function on a chan_pjsip channel to obtain run-time
information about the channel from the PJSIP channel driver and the PJSIP
stack. This includes:
* RTP information, including source/destination media addresses, whether or
not the media is secure, held, and other properties.
* RTCP information. This includes sets of parseable information, as well as
individual statistic attriutes.
* PJSIP information. This includes URIs, local/remote signalling addresses,
whether or not the signalling is secure, and other properties.
* The endpoint name. This can be used in conjunction with the PJSIP_ENDPOINT
function to obtain more detailed endpoint information.
Review: https://reviewboard.asterisk.org/r/3038/
........
Merged revisions 403618 from http://svn.asterisk.org/svn/asterisk/branches/12
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@403619 65c4cc65-6c06-0410-ace0-fbb531ad65f3
* Make ast_sorcery_observer_remove() accept a const callbacks struct.
* Make ast_sorcery_observer_remove() tolerant of the sorcery parameter
being NULL. Now it can be called within a module unload routine if the
sorcery initialization fails.
* Fix ast_sorcery_observer_add() to fail if the container link fails.
........
Merged revisions 403324 from http://svn.asterisk.org/svn/asterisk/branches/12
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@403327 65c4cc65-6c06-0410-ace0-fbb531ad65f3
This adds channel locks around calls to create channel snapshots as well
as other functions which operate on a channel and then end up
creating a channel snapshot. Functions that expect the channel to be
locked prior to being called have had their documentation updated to
indicate such.
........
Merged revisions 403311 from http://svn.asterisk.org/svn/asterisk/branches/12
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@403314 65c4cc65-6c06-0410-ace0-fbb531ad65f3
Transport type determination for security events has been simplified to use
the type present on the message itself instead of searching through configured
transports to find the transport used.
The actual WebSocket transport has also been simplified. It now leverages the
existing PJSIP transport manager for finding the active WebSocket transport
for outgoing messages. This removes the need for res_pjsip_transport_websocket
to store a mapping itself.
(closes issue ASTERISK-22897)
Reported by: Max E. Reyes Vera J.
Review: https://reviewboard.asterisk.org/r/3036/
........
Merged revisions 403256 from http://svn.asterisk.org/svn/asterisk/branches/12
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@403257 65c4cc65-6c06-0410-ace0-fbb531ad65f3
The patch allows ARI to parse request parameters from an incoming JSON
request body, instead of requiring the request to come in as query
parameters (which is just weird for POST and DELETE) or form
parameters (which is okay, but a bit asymmetric given that all of our
responses are JSON).
For any operation that does _not_ have a parameter defined of type
body (i.e. "paramType": "body" in the API declaration), if a request
provides a request body with a Content type of "application/json", the
provided JSON document is parsed and searched for parameters.
The expected fields in the provided JSON document should match the
query parameters defined for the operation. If the parameter has
'allowMultiple' set, then the field in the JSON document may
optionally be an array of values.
(closes issue ASTERISK-22685)
Review: https://reviewboard.asterisk.org/r/2994/
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@403177 65c4cc65-6c06-0410-ace0-fbb531ad65f3
Created a data model and implemented functionality for an ARI device state
resource. The following operations have been added that allow a user to
manipulate an ARI controlled device:
Create/Change the state of an ARI controlled device
PUT /deviceStates/{deviceName}&{deviceState}
Retrieve all ARI controlled devices
GET /deviceStates
Retrieve the current state of a device
GET /deviceStates/{deviceName}
Destroy a device-state controlled by ARI
DELETE /deviceStates/{deviceName}
The ARI controlled device must begin with 'Stasis:'. An example controlled
device name would be Stasis:Example. A 'DeviceStateChanged' event has also
been added so that an application can subscribe and receive device change
events. Any device state, ARI controlled or not, can be subscribed to.
While adding the event, the underlying subscription control mechanism was
refactored so that all current and future resource subscriptions would be
the same. Each event resource must now register itself in order to be able
to properly handle [un]subscribes.
(issue ASTERISK-22838)
Reported by: Matt Jordan
Review: https://reviewboard.asterisk.org/r/3025/
........
Merged revisions 403134 from http://svn.asterisk.org/svn/asterisk/branches/12
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@403135 65c4cc65-6c06-0410-ace0-fbb531ad65f3
Created the following AMI commands and corresponding events for res_pjsip:
PJSIPShowEndpoints - Provides a listing of all pjsip endpoints and a few
select attributes on each.
Events:
EndpointList - for each endpoint a few attributes.
EndpointlistComplete - after all endpoints have been listed.
PJSIPShowEndpoint - Provides a detail list of attributes for a specified
endpoint.
Events:
EndpointDetail - attributes on an endpoint.
AorDetail - raised for each AOR on an endpoint.
AuthDetail - raised for each associated inbound and outbound auth
TransportDetail - transport attributes.
IdentifyDetail - attributes for the identify object associated with
the endpoint.
EndpointDetailComplete - last event raised after all detail events.
PJSIPShowRegistrationsInbound - Provides a detail listing of all inbound
registrations.
Events:
InboundRegistrationDetail - inbound registration attributes for each
registration.
InboundRegistrationDetailComplete - raised after all detail records have
been listed.
PJSIPShowRegistrationsOutbound - Provides a detail listing of all outbound
registrations.
Events:
OutboundRegistrationDetail - outbound registration attributes for each
registration.
OutboundRegistrationDetailComplete - raised after all detail records
have been listed.
PJSIPShowSubscriptionsInbound - A detail listing of all inbound subscriptions
and their attributes.
Events:
SubscriptionDetail - on each subscription detailed attributes
SubscriptionDetailComplete - raised after all detail records have
been listed.
PJSIPShowSubscriptionsOutbound - A detail listing of all outboundbound
subscriptions and their attributes.
Events:
SubscriptionDetail - on each subscription detailed attributes
SubscriptionDetailComplete - raised after all detail records have
been listed.
(issue ASTERISK-22609)
Reported by: Matt Jordan
Review: https://reviewboard.asterisk.org/r/2959/
........
Merged revisions 403131 from http://svn.asterisk.org/svn/asterisk/branches/12
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@403133 65c4cc65-6c06-0410-ace0-fbb531ad65f3
This change prevents channels used as implementation details from
leaking out to ARI. It does this by preventing creation of JSON blobs
of channel snapshots created from those channels and sanitizing JSON
blobs of bridge snapshots as they are created. This introduces a
framework for excluding information from output targeted at Stasis
applications on a consumer-by-consumer basis using channel sanitization
callbacks which could be extended to bridges or endpoints if necessary.
This prevents unhelpful error messages from being generated by
ast_json_pack.
This also corrects a bug where BridgeCreated events would not be
created.
(closes issue ASTERISK-22744)
Review: https://reviewboard.asterisk.org/r/2987/
Reported by: David M. Lee
........
Merged revisions 403069 from http://svn.asterisk.org/svn/asterisk/branches/12
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@403070 65c4cc65-6c06-0410-ace0-fbb531ad65f3
SIP transaction group lock support has been backported into our pjproject. Since the code
now internally uses a group lock the code is now changed to unlock it if present. Note
that the act of finding the transaction is what actually returns it locked.
For further information about group locks check out the wiki page at:
http://trac.pjsip.org/repos/wiki/Group_Lock
(issue ASTERISK-22818)
Reported by: Matt Jordan
........
Merged revisions 402864 from http://svn.asterisk.org/svn/asterisk/branches/12
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@402865 65c4cc65-6c06-0410-ace0-fbb531ad65f3
This patch explicitly defines AST_AF_* enum constants to their sys/socket.h
defined equivalents. It is certainly unclear why these constants actually have
to exist, given that netsock2.h includes sys/socket.h; however, since the code
base is already liberally sprinkled with the usage of AST_AF_* (as well as with
direct calls to AF_*), this will at least keep the semantics consistent between
their usage across systems.
........
Merged revisions 402503 from http://svn.asterisk.org/svn/asterisk/branches/12
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@402504 65c4cc65-6c06-0410-ace0-fbb531ad65f3
Made the vector macro API be more like linked lists.
1) Added a name parameter to ast_vector() to name the vector struct.
2) Made the API take a pointer to the vector struct instead of the struct
itself.
3) Added an element cleanup macro/function parameter when removing an
element from the vector for ast_vector_remove_cmp_unordered() and
ast_vector_remove_elem_unordered().
4) Added ast_vector_get_addr() in case the vector element is not a simple
pointer.
* Converted an inline vector usage in stasis_message_router to use the
vector API. It needed the API improvements so it could be converted.
* Fixed topic reference leak in router_dtor() when the
stasis_message_router is destroyed.
* Fixed deadlock potential in stasis_forward_all() and
stasis_forward_cancel(). Locking two topics at the same time requires
deadlock avoidance.
* Made internal_stasis_subscribe() tolerant of a NULL topic.
* Made stasis_message_router_add(),
stasis_message_router_add_cache_update(), stasis_message_router_remove(),
and stasis_message_router_remove_cache_update() tolerant of a NULL
message_type.
* Promoted a LOG_DEBUG message to LOG_ERROR as intended in
dispatch_message().
Review: https://reviewboard.asterisk.org/r/2903/
........
Merged revisions 402429 from http://svn.asterisk.org/svn/asterisk/branches/12
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@402430 65c4cc65-6c06-0410-ace0-fbb531ad65f3
* Typedefed and added doxegen for the voicemail callback functions.
* Simplified the prototypes for ast_install_vm_functions() and
ast_install_vm_test_functions() to use the new function typedefs.
* Simplified the voicemail callback function pointer variable declarations
to use the new function typedefs.
........
Merged revisions 402398 from http://svn.asterisk.org/svn/asterisk/branches/12
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@402406 65c4cc65-6c06-0410-ace0-fbb531ad65f3
Adds the following AMI events, closely following their CLI counterparts:
BridgeDestroy
BridgeKick
BridgeTechnologyList
BridgeTechnologySuspend
BridgeTechnologyUnsuspend
BridgeDestroy kicks an entire bridge, where BridgeKick kicks just one
channel off the bridge. When kicking a channel, specifying the bridge
also (optional) insures it is not removed from the wrong bridge. The
BridgeTechnology events allow viewing and changing suspension status,
which affects only subsequent not active bridging.
(closes ASTERISK-22356)
Reported by: Richard Mudgett
Review: https://reviewboard.asterisk.org/r/2973/
........
Merged revisions 402387 from http://svn.asterisk.org/svn/asterisk/branches/12
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@402388 65c4cc65-6c06-0410-ace0-fbb531ad65f3
The ring operation sends ringing to the specified channel it is invoked on.
The dtmf operation can be used to send DTMF digits to the specified channel
of a specific length with a wait time in between. Finally hangup reasons
allow you to specify why a channel is being hung up (busy, congestion).
Early media behavior has also been tweaked slightly. When playing media to a channel
it will no longer automatically answer. If it has not been answered a progress indication
is sent instead.
(closes issue ASTERISK-22701)
Reported by: Matt Jordan
Review: https://reviewboard.asterisk.org/r/2916/
........
Merged revisions 402358 from http://svn.asterisk.org/svn/asterisk/branches/12
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@402359 65c4cc65-6c06-0410-ace0-fbb531ad65f3
If a Stasis application is specified an implicit subscription is done on the originated
channel. This was previously done with the channel lock held which is dangerous as the
underlying code locks the container and iterates items. This change releases the lock
on the originated channel before subscribing occurs.
(closes issue ASTERISK-22768)
Reported by: Matt Jordan
Review: https://reviewboard.asterisk.org/r/2979/
........
Merged revisions 402346 from http://svn.asterisk.org/svn/asterisk/branches/12
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@402347 65c4cc65-6c06-0410-ace0-fbb531ad65f3
In function ast_rtp_instance_early _bridge_make_compatible the
use of instance 0/1 as arguments doesn't clearly communicate a
direction that the copying of payloads from the source channel
to the destination channel will occur, making it more probable
to have the arguments to ast_rtp_codecs_payloads_copy() put in
the reverse order. This patch renames the arguments with _dst
and _src suffixes and corrects the copy direction.
(closes issue ASTERISK-21464)
Reported by: Kevin Stewart
Review: https://reviewboard.asterisk.org/r/2894/
........
Merged revisions 402000 from http://svn.asterisk.org/svn/asterisk/branches/1.8
Test shows rtpmap:119 being copied per this change, but is not in sip invite
........
Merged revisions 402042 from http://svn.asterisk.org/svn/asterisk/branches/11
........
Merged revisions 402043 from http://svn.asterisk.org/svn/asterisk/branches/12
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@402054 65c4cc65-6c06-0410-ace0-fbb531ad65f3
The original issue noted that the bridge is orphaned when res_parking.so
is not loaded and a call uses the dial kK flags.
A similar issue happens when only one of the park flags is used. In this
case you have the bridge with one or the other channel left in it. The
channel and bridge will stay around until the channel hangs up.
* Fixed the initial bridge channel push failure to act as if the channel
were kicked out of the bridge. The bridge then decides if it needs to be
dissolved.
(closes issue ASTERISK-22629)
Reported by: Kevin Harwell
Review: https://reviewboard.asterisk.org/r/2928/
........
Merged revisions 401424 from http://svn.asterisk.org/svn/asterisk/branches/12
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@401425 65c4cc65-6c06-0410-ace0-fbb531ad65f3
Most callers of ast_channel_make_compatible() happen before the channels
enter a two party bridge. With the new bridging framework, two party
bridging technologies may also call ast_channel_make_compatible() when
there is more than one thread involved with the two channels.
* Added channel lock protection in set_format() and
ast_channel_make_compatible_helper() when dealing with the channel's
native formats while setting up a translation path.
* Fixed best_src_fmt and best_dst_fmt usage consistency in
ast_channel_make_compatible_helper(). The call to
ast_translator_best_choice() got them backwards.
* Updated some callers of ast_channel_make_compatible() and the function
documentation. There is actually a difference between the two channels
passed in.
* Fixed the deadlock potential in res_fax.c dealing with
ast_channel_make_compatible(). The deadlock potential was already there
anyway because res_fax called ast_channel_make_compatible() with chan
locked.
(closes issue ASTERISK-22542)
Reported by: Matt Jordan
Review: https://reviewboard.asterisk.org/r/2915/
........
Merged revisions 401239 from http://svn.asterisk.org/svn/asterisk/branches/12
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@401240 65c4cc65-6c06-0410-ace0-fbb531ad65f3
This patch adds an /applications API to ARI, allowing explicit management of
Stasis applications.
* GET /applications - list current applications
* GET /applications/{applicationName} - get details of a specific application
* POST /applications/{applicationName}/subscription - explicitly subscribe to
a channel, bridge or endpoint
* DELETE /applications/{applicationName}/subscription - explicitly unsubscribe
from a channel, bridge or endpoint
Subscriptions work by a reference counting mechanism: if you subscript to an
event source X number of times, you must unsubscribe X number of times to stop
receiveing events for that event source.
Review: https://reviewboard.asterisk.org/r/2862
(issue ASTERISK-22451)
Reported by: Matt Jordan
........
Merged revisions 400522 from http://svn.asterisk.org/svn/asterisk/branches/12
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@400523 65c4cc65-6c06-0410-ace0-fbb531ad65f3
When a party leaves a bridge, there may be more participants in the bridge than expected.
As such, it is important not to make assumptions regarding the list of channels in a
bridge.
This change makes it so that when a party leaves a native RTP bridge, we unbridge it and
the party it was bridged with. Previously, the first and last channels in the list were
unbridged since it was assumed that these were the two channels that had been bridged. As
previously stated, a new party had been inserted into the bridge, so this logic did not
work properly.
(closes issue ASTERISK-22615)
reported by Matt Jordan
Review: https://reviewboard.asterisk.org/r/2899
........
Merged revisions 400403 from http://svn.asterisk.org/svn/asterisk/branches/12
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@400452 65c4cc65-6c06-0410-ace0-fbb531ad65f3
This introduces usage of an additional libxslt cleanup function,
xsltCleanupGlobals, when the configure script detects that it is
available. Early versions of the library did not include this function.
(closes issue ASTERISK-22570)
Reported by: Corey Farrell
Patches:
xsltCleanupGlobals.patch uploaded by Corey Farrell (License 5909)
........
Merged revisions 400384 from http://svn.asterisk.org/svn/asterisk/branches/12
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@400385 65c4cc65-6c06-0410-ace0-fbb531ad65f3
Channel snapshots have string representations of the channel's native formats.
Prior to this change, the format strings were re-created on ever channel snapshot
creation. Since channel native formats rarely change, this was very wasteful.
Now, string representations of formats may optionally be stored on the ast_format_cap
for cases where string representations may be requested frequently. When formats
are altered, the string cache is marked as invalid. When strings are requested, the
cache validity is checked. If the cache is valid, then the cached strings are copied.
If the cache is invalid, then the string cache is rebuilt and copied, and the cache
is marked as being valid again.
Review: https://reviewboard.asterisk.org/r/2879
........
Merged revisions 400356 from http://svn.asterisk.org/svn/asterisk/branches/12
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@400363 65c4cc65-6c06-0410-ace0-fbb531ad65f3
........
r400318 | mmichelson | 2013-10-02 17:08:49 -0500 (Wed, 02 Oct 2013) | 12 lines
Remove unnecessary waits from stasis.
Since caches are updated on publisher threads, there is no need
to wait for the cache updates to occur after a stasis message
is published.
In the case of chan_pjsip device state changes, this set of
changes caused an improvement to performance.
Review: https://reviewboard.asterisk.org/r/2890
........
r400319 | mmichelson | 2013-10-02 17:10:54 -0500 (Wed, 02 Oct 2013) | 3 lines
Remove svn:mergeinfo property.
........
Merged revisions 400318-400319 from http://svn.asterisk.org/svn/asterisk/branches/12
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@400335 65c4cc65-6c06-0410-ace0-fbb531ad65f3
........
r399887 | dlee | 2013-09-26 10:41:47 -0500 (Thu, 26 Sep 2013) | 1 line
Minor performance bump by not allocate manager variable struct if we don't need it
........
r400138 | dlee | 2013-09-30 10:24:00 -0500 (Mon, 30 Sep 2013) | 23 lines
Stasis performance improvements
This patch addresses several performance problems that were found in
the initial performance testing of Asterisk 12.
The Stasis dispatch object was allocated as an AO2 object, even though
it has a very confined lifecycle. This was replaced with a straight
ast_malloc().
The Stasis message router was spending an inordinate amount of time
searching hash tables. In this case, most of our routers had 6 or
fewer routes in them to begin with. This was replaced with an array
that's searched linearly for the route.
We more heavily rely on AO2 objects in Asterisk 12, and the memset()
in ao2_ref() actually became noticeable on the profile. This was
#ifdef'ed to only run when AO2_DEBUG was enabled.
After being misled by an erroneous comment in taskprocessor.c during
profiling, the wrong comment was removed.
Review: https://reviewboard.asterisk.org/r/2873/
........
r400178 | dlee | 2013-09-30 13:26:27 -0500 (Mon, 30 Sep 2013) | 24 lines
Taskprocessor optimization; switch Stasis to use taskprocessors
This patch optimizes taskprocessor to use a semaphore for signaling,
which the OS can do a better job at managing contention and waiting
that we can with a mutex and condition.
The taskprocessor execution was also slightly optimized to reduce the
number of locks taken.
The only observable difference in the taskprocessor implementation is
that when the final reference to the taskprocessor goes away, it will
execute all tasks to completion instead of discarding the unexecuted
tasks.
For systems where unnamed semaphores are not supported, a really
simple semaphore implementation is provided. (Which gives identical
performance as the original taskprocessor implementation).
The way we ended up implementing Stasis caused the threadpool to be a
burden instead of a boost to performance. This was switched to just
use taskprocessors directly for subscriptions.
Review: https://reviewboard.asterisk.org/r/2881/
........
r400180 | dlee | 2013-09-30 13:39:34 -0500 (Mon, 30 Sep 2013) | 28 lines
Optimize how Stasis forwards are dispatched
This patch optimizes how forwards are dispatched in Stasis.
Originally, forwards were dispatched as subscriptions that are invoked
on the publishing thread. This did not account for the vast number of
forwards we would end up having in the system, and the amount of work it
would take to walk though the forward subscriptions.
This patch modifies Stasis so that rather than walking the tree of
forwards on every dispatch, when forwards and subscriptions are changed,
the subscriber list for every topic in the tree is changed.
This has a couple of benefits. First, this reduces the workload of
dispatching messages. It also reduces contention when dispatching to
different topics that happen to forward to the same aggregation topic
(as happens with all of the channel, bridge and endpoint topics).
Since forwards are no longer subscriptions, the bulk of this patch is
simply changing stasis_subscription objects to stasis_forward objects
(which, admittedly, I should have done in the first place.)
Since this required me to yet again put in a growing array, I finally
abstracted that out into a set of ast_vector macros in
asterisk/vector.h.
Review: https://reviewboard.asterisk.org/r/2883/
........
r400181 | dlee | 2013-09-30 13:48:57 -0500 (Mon, 30 Sep 2013) | 28 lines
Remove dispatch object allocation from Stasis publishing
While looking for areas for performance improvement, I realized that an
unused feature in Stasis was negatively impacting performance.
When a message is sent to a subscriber, a dispatch object is allocated
for the dispatch, containing the topic the message was published to, the
subscriber the message is being sent to, and the message itself.
The topic is actually unused by any subscriber in Asterisk today. And
the subscriber is associated with the taskprocessor the message is being
dispatched to.
First, this patch removes the unused topic parameter from Stasis
subscription callbacks.
Second, this patch introduces the concept of taskprocessor local data,
data that may be set on a taskprocessor and provided along with the data
pointer when a task is pushed using the ast_taskprocessor_push_local()
call. This allows the task to have both data specific to that
taskprocessor, in addition to data specific to that invocation.
With those two changes, the dispatch object can be removed completely,
and the message is simply refcounted and sent directly to the
taskprocessor.
Review: https://reviewboard.asterisk.org/r/2884/
........
Merged revisions 399887,400138,400178,400180-400181 from http://svn.asterisk.org/svn/asterisk/branches/12
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@400186 65c4cc65-6c06-0410-ace0-fbb531ad65f3
There was a collision of mod_data use on the transaction between using a nat
hook and an session response callback. During state change it was assumed
what was in the mod_data was nothing or the response callback. However, it
was possible for it to also contain a nat hook thus resulting in a bad cast
and a crash.
Added the ability to store multiple data elements in mod_data via a hash table.
In this instance, mod_data now stores a hash table of the two values that can
be retrieved using an associated string key.
(closes issue ASTERISK-22394)
Reported by: Rusty Newton
Review: https://reviewboard.asterisk.org/r/2843/
........
Merged revisions 399990 from http://svn.asterisk.org/svn/asterisk/branches/12
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@399991 65c4cc65-6c06-0410-ace0-fbb531ad65f3
While handling a registration request a race condition could occur if/when two+
clients registered at the same time. This happened when one request obtained a
copy of the current contacts for an AOR and another request did the same before
the first request updated. Thus the second would update and overwrite the first
(or vice-versa depending on which actually updated first). In the case of it
being the same contact two "add" events would be raised.
pjsip registration handling is now serialized to alleviate this issue.
(closes issue AST-1213)
Reported by: John Bigelow
Review: https://reviewboard.asterisk.org/r/2860/
........
Merged revisions 399897 from http://svn.asterisk.org/svn/asterisk/branches/12
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@399898 65c4cc65-6c06-0410-ace0-fbb531ad65f3
The endpoint option does not apply to communication with external entities. Rather,
the option is applied to all communications with the endpoint. The external_media_address
transport configuration option may override the endpoint option if it turns out that
we are going to be communicating with an external entity.
Two things of note:
1) I have not updated the XML documentation. This is being taken care of by Rusty as part
of his work on issue ASTERISK-22405
2) This commit is likely to cause testsuite failures since there are tests that use the
external_media_address endpoint option, and they will need to be changed over. Well, I'm
planning to get that updated ASAP after this commit.
(closes issue ASTERISK-22528)
reported by Rusty Newton
........
Merged revisions 399283 from http://svn.asterisk.org/svn/asterisk/branches/12
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@399284 65c4cc65-6c06-0410-ace0-fbb531ad65f3
The Dial, Queue, and FollowMe applications need to inhibit the bridging
initial connected line exchange in order to support the 'I' option.
* Replaced the pass_reference flag on ast_bridge_join() with a flags
parameter to pass other flags defined by enum ast_bridge_join_flags.
* Replaced the independent flag on ast_bridge_impart() with a flags
parameter to pass other flags defined by enum ast_bridge_impart_flags.
* Since the Dial, Queue, and FollowMe applications are now the only
callers of ast_bridge_call() and ast_bridge_call_with_flags(), changed the
calling contract to require the initial COLP exchange to already have been
done by the caller.
* Made all callers of ast_bridge_impart() check the return value. It is
important. As a precaution, I also made the compiler complain now if it
is not checked.
* Did some cleanup in parking_tests.c as a result of checking the
ast_bridge_impart() return value.
An independent, but associated change is:
* Reduce stack usage in ast_indicate_data() and add a dropping redundant
connected line verbose message.
(closes issue ASTERISK-22072)
Reported by: Joshua Colp
Review: https://reviewboard.asterisk.org/r/2845/
........
Merged revisions 399136 from http://svn.asterisk.org/svn/asterisk/branches/12
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@399138 65c4cc65-6c06-0410-ace0-fbb531ad65f3
This patch fixes some long-standing bugs in debug threads that were
exacerbated with recent Optional API work in Asterisk 12.
With debug threads enabled, on some systems, there's a lock ordering
problem between our mutex and glibc's mutex protecting its module list
(Ubuntu Lucid, glibc 2.11.1 in this instance). In one thread, the module
list will be locked before acquiring our mutex. In another thread, our
mutex will be locked before locking the module list (which happens in
the depths of calling backtrace()).
This patch fixes this issue by moving backtrace() calls outside of
critical sections that have the mutex acquired. The bigger change was to
reentrancy tracking for ast_cond_{timed,}wait, which wrongly assumed
that waiting on the mutex was equivalent to a single unlock (it actually
suspends all recursive locks on the mutex).
(closes issue ASTERISK-22455)
Review: https://reviewboard.asterisk.org/r/2824/
........
Merged revisions 398648 from http://svn.asterisk.org/svn/asterisk/branches/1.8
........
Merged revisions 398649 from http://svn.asterisk.org/svn/asterisk/branches/11
........
Merged revisions 398651 from http://svn.asterisk.org/svn/asterisk/branches/12
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@398652 65c4cc65-6c06-0410-ace0-fbb531ad65f3
The cleanup code for optional_api needs to happen after all of the optional
API users and providers have unused/unprovided. Unfortunately, regsitering the
atexit() handler at the beginning of main() isn't soon enough, since module
destructors run after that.
........
Merged revisions 398149 from http://svn.asterisk.org/svn/asterisk/branches/12
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@398150 65c4cc65-6c06-0410-ace0-fbb531ad65f3
Some configuration objects currently won't place nice if reloaded.
Specifically, in this case the pjsip transport objects. Now when
registering an object in sorcery one may specify that the object is
allowed to be reloaded or not. If the object is set to not reload
then upon reloading of the configuration the objects of that type
will not be reloaded. The initially loaded objects of that type
however will remain.
While the transport objects will not longer be reloaded it is still
possible for a user to configure an endpoint to an invalid transport.
A couple of log messages were added to help diagnose this problem if
it occurs.
(closes issue ASTERISK-22382)
Reported by: Rusty Newton
(closes issue ASTERISK-22384)
Reported by: Rusty Newton
Review: https://reviewboard.asterisk.org/r/2807/
........
Merged revisions 398139 from http://svn.asterisk.org/svn/asterisk/branches/12
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@398140 65c4cc65-6c06-0410-ace0-fbb531ad65f3
With the new work in Asterisk 12, there are some uses of the
optional_api that are prone to failure. The details are rather involved,
and captured on [the wiki][1].
This patch addresses the issue by removing almost all of the magic from
the optional API implementation. Instead of relying on weak symbol
resolution, a new optional_api.c module was added to Asterisk core.
For modules providing an optional API, the pointer to the implementation
function is registered with the core. For modules that use an optional
API, a pointer to a stub function, along with a optional_ref function
pointer are registered with the core. The optional_ref function pointers
is set to the implementation function when it's provided, or the stub
function when it's now.
Since the implementation no longer relies on magic, it is now supported
on all platforms. In the spirit of choice, an OPTIONAL_API flag was
added, so we can disable the optional_api if needed (maybe it's buggy on
some bizarre platform I haven't tested on)
The AST_OPTIONAL_API*() macros themselves remained unchanged, so
existing code could remain unchanged. But to help with debugging the
optional_api, the patch limits the #include of optional API's to just
the modules using the API. This also reduces resource waste maintaining
optional_ref pointers that aren't used.
Other changes made as a part of this patch:
* The stubs for http_websocket that wrap system calls set errno to
ENOSYS.
* res_http_websocket now properly increments module use count.
* In loader.c, the while() wrappers around dlclose() were removed. The
while(!dlclose()) is actually an anti-pattern, which can lead to
infinite loops if the module you're attempting to unload exports a
symbol that was directly linked to.
* The special handling of nonoptreq on systems without weak symbol
support was removed, since we no longer rely on weak symbols for
optional_api.
[1]: https://wiki.asterisk.org/wiki/x/wACUAQ
(closes issue ASTERISK-22296)
Reported by: Matt Jordan
Review: https://reviewboard.asterisk.org/r/2797/
........
Merged revisions 397989 from http://svn.asterisk.org/svn/asterisk/branches/12
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@397990 65c4cc65-6c06-0410-ace0-fbb531ad65f3
his patch implements the ARI API's for stored recordings. While the
original task only specified deleting a recording, it was simple
enough to implement the GET for all recordings, and for an individual
recording.
The recording playback operation was modified to use the same code for
accessing the recording as the REST API, so that they will behave
consistently.
There were several problems with the api-docs that were also fixed,
bringing the ARI spec in line with the implementation. There were some
'wishful thinking' fields on the stored recording model (duration and
timestamp) that were removed, because I ended up not implementing a
metadata file to go along with the recording to store such information.
The GET /recordings/live operation was removed, since it's not really
that useful to get a list of all recordings that are currently going
on in the system. (At least, if we did that, we'd probably want to
also list all of the current playbacks. Which seems weird.)
(closes issue ASTERISK-21582)
Review: https://reviewboard.asterisk.org/r/2693/
........
Merged revisions 397985 from http://svn.asterisk.org/svn/asterisk/branches/12
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@397988 65c4cc65-6c06-0410-ace0-fbb531ad65f3
The config options test requires the entire configuration item to be transparent from
the documentation system. So we let it do that too.
As an aside, please do not use this power for evil. Documentation is your friend, and
you really should document your configurations. Hiding your module's configuration
information from the system attempting to enforce some sanity in the universe is something
only a Bond villain would contemplate.
........
Merged revisions 397628 from http://svn.asterisk.org/svn/asterisk/branches/12
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@397629 65c4cc65-6c06-0410-ace0-fbb531ad65f3
DTMF start/end and hold/unhold events have state because a DTMF begin
event and hold event must be ended by something.
The following cases need to be handled when a channel is moved around in
the system.
* When a channel leaves a bridge it may owe a DTMF end event to the
bridge.
* When a channel leaves a bridge it may owe an UNHOLD event to the bridge.
(This case is explicitly ignored because things like transfers need
explicit control over this.)
* When a channel leaves the bridging system it may need to simulate a DTMF
end event to the channel.
* When a channel leaves the bridging system it may need to simulate an
UNHOLD event to the channel.
The patch also fixes the following:
* Fixes playing a file and restarting MOH using the latest MOH class used.
(closes issue ASTERISK-22043)
Reported by: Matt Jordan
Review: https://reviewboard.asterisk.org/r/2791/
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@397577 65c4cc65-6c06-0410-ace0-fbb531ad65f3
Review https://reviewboard.asterisk.org/r/2580/ tried to fix the mismatch
in memory pools but had a math error determining the buffer size and
didn't address other similar memory pool mismatches.
* Effectively reverted the previous patch to go in the same direction as
trunk for the returned memory pool of ast_bt_get_symbols().
* Fixed memory leak in ast_bt_get_symbols() when BETTER_BACKTRACES is
defined.
* Fixed some formatting in ast_bt_get_symbols().
* Fixed sig_pri.c freeing memory allocated by libpri when MALLOC_DEBUG is
enabled.
* Fixed __dump_backtrace() freeing memory from ast_bt_get_symbols() when
MALLOC_DEBUG is enabled.
* Moved __dump_backtrace() because of compile issues with the utils
directory.
(closes issue ASTERISK-22221)
Reported by: Matt Jordan
Review: https://reviewboard.asterisk.org/r/2778/
........
Merged revisions 397525 from http://svn.asterisk.org/svn/asterisk/branches/1.8
........
Merged revisions 397528 from http://svn.asterisk.org/svn/asterisk/branches/11
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@397570 65c4cc65-6c06-0410-ace0-fbb531ad65f3
This patch adds error checking to ARI bridge operations, when
adding/removing channels to/from bridges.
In general, the error codes fall out as follows:
* Bridge not found - 404 Not Found
* Bridge not in Stasis - 409 Conflict
* Channel not found - 400 Bad Request
* Channel not in Stasis - 422 Unprocessable Entity
* Channel not in this bridge (on remove) - 422 Unprocessable Entity
(closes issue ASTERISK-22036)
Review: https://reviewboard.asterisk.org/r/2769/
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@397565 65c4cc65-6c06-0410-ace0-fbb531ad65f3
This patch adds pass through support for Opus and VP8. That includes:
* Format attribute negotiation for Opus. Note that unlike some other codecs,
the draft RFC specifies having spaces delimiting the attributes in addition
to ';', so you have "attra=X; attrb=Y". This broke the attribute parsing in
chan_sip, so a small tweak was also included in this patch for that.
* A format attribute negotiation module for Opus, res_format_attr_opus
* Fast picture update for VP8. Since VP8 uses a different RTCP packet number
than FIR, this really is specific to VP8 at this time.
Note that the format attribute negotiation in res_pjsip_sdp_rtp was written
by mjordan. The rest of this patch was written completely by Lorenzo Miniero.
Review: https://reviewboard.asterisk.org/r/2723/
(closes issue ASTERISK-21981)
Reported by: Tzafrir Cohen
patches:
asterisk_opus+vp8_passthrough_20130718.patch uploaded by lminiero (License 6518)
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@397526 65c4cc65-6c06-0410-ace0-fbb531ad65f3
There are times when a configuration option should not have documentation.
1. Some options are registered with a particular object merely as a warning to
users. These options aren't even really 'deprecated' - which has its own
separate API call - they are actually provided by a different configuration
file. The options are merely registered so that the user gets a warning that
a different configuration file provides the item.
2. Some object types - most notably some used by modules that use sorcery - are
completely internal and should never be shown to the user.
3. Sorcery itself has several 'hidden' fields that should never be shown to a
user.
This patch updates the configuration framework and sorcery with additional API
calls that allow a module to register types as internal and options as not
requiring documentation. This bypasses the XML documentation checking.
This patch also re-enables the strict XML documentation checking in trunk, as
well as updates some documentation that was missing.
Review: https://reviewboard.asterisk.org/r/2785/
(closes issue ASTERISK-22359)
Reported by: Matt Jordan
(closes issue ASTERISK-22112)
Reported by: Rusty Newton
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@397524 65c4cc65-6c06-0410-ace0-fbb531ad65f3
Adds ARI functions to be able to turn on/off music on hold in a
bridge. It actually functions more as a background music without
further actions on the bridge since if the rest of the channels
in the bridge aren't explicitly muted, they will still be able
to communicate.
(closes issue ASTERISK-21974)
Reported by: Matt Jordan
Review: https://reviewboard.asterisk.org/r/2688/
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@397505 65c4cc65-6c06-0410-ace0-fbb531ad65f3
Russell Bryant
Richard Mudgett
Kinsey Moore
Matthew Jordan
Mark Michelson
Corey Farrell
Joshua Colp
Jonathan Rose
George Joseph
Scott Griepentrog
David M. Lee
Kevin Harwell
Rusty Newton
Michael L. Young