This patch adds support for RFC 3327 "Path" headers. This can be enabled in
sip.conf using the 'supportpath' setting, either on a global basis or on a
peer basis. This setting enables Asterisk to route outgoing out-of-dialog
requests via a set of proxies by using a pre-loaded route-set defined by the
Path headers in the REGISTER request. This patch also adds Realtime support
for dynamically updating the Path information for a peer.
A huge thank-you to Klaus Darillion and Olle E Johansson for their efforts
in writing this patch.
Review: https://reviewboard.asterisk.org/r/2235/
Review: https://reviewboard.asterisk.org/r/991/
(closes issue ASTERISK-16884)
Reported by: klaus3000
Tested by: klaus3000, oej, mjordan
patches:
path-1.8.0-patch.txt uploaded by klaus3000 (License 5054)
oolong-path-support-trunk in team branch by oej (License 5267)
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@382440 65c4cc65-6c06-0410-ace0-fbb531ad65f3
The original report had to do with a realtime peer behind NAT being pruned and
the peer's private address being used instead of its external address. Upon
debugging, it was discovered that this was being caused by the addition of
the auto_force_rport and auto_comedia settings.
This patch does the following:
* Adds a missing note to the CHANGES file indicating that the default global nat
setting is auto_force_rport
* Constify the 'req' parameter for check_via()
* Add calls to check_via() in a couple of places in order for the auto_*
settings to do their job in attempting to determine if NAT is involved
* Set the flags SIP_NAT_FORCE_RPORT and SIP_PAGE2_SYMMETRICRTP if the auto_*
settings are in use where it was needed
* Moves the copying of peer flags up in build_peer() to before they are used;
this fixes the realtime prune issue
* Update the contrib/realtime schemas to allow the nat column to handle the
different nat setting combinations we have
This patch received a review and "Ship It!" on the issue itself.
(closes issue ASTERISK-20904)
Reported by: JoshE
Tested by: JoshE, Michael L. Young
Patches:
asterisk-20904-nat-auto-and-rt-peersv2.diff Michael L. Young (license 5026)
........
Merged revisions 382322 from http://svn.asterisk.org/svn/asterisk/branches/11
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@382323 65c4cc65-6c06-0410-ace0-fbb531ad65f3
This adds the ability to get the DPMA version, a listing of the local
firmware directory, and indexes of configured remote directories.
(closes issue AST-1070)
Reported By: Malcolm Davenport
Tested By: Kinsey Moore <kmoore@digium.com>
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@380004 65c4cc65-6c06-0410-ace0-fbb531ad65f3
When r376428 was commited to re-order start up sequences to be more tolerant of
forking with thread primitives, a few items were changed that caused changes
in behavior on some distros. This includes:
* Not displaying the splash screen on a remote console.
* Displaying an error message on stderr when a remote console cannot connect
to a running instance of Asterisk.
In the first case, the splash screen was re-added (thanks to Michael L. Young).
In the second case, the various init.d scripts were modified to pipe stderr
to /dev/null, as the error message is useful - if you execute a remote
console or a remote console command execution and it fail, it should tell
you. Note that the error message was always present, it just failed to be
printed prior to r376428.
Much thanks to the folks who quickly reported this problem, provided solutions,
and promptly tested the various init.d scripts on a variety of distros.
(closes issue ASTERISK-20945)
Reported by: Warren Selby
Tested by: Michael L. Young, Jamuel Starkey, kaldemar, Danny Nicholas, mjordan
patches:
asterisk-20945-remote-intro-msg.diff uploaded by elguero (license 5026)
ASTERISK-20945-1.8-mjordan.diff uploaded by mjordan (license 6283)
........
Merged revisions 379760 from http://svn.asterisk.org/svn/asterisk/branches/1.8
........
Merged revisions 379777 from http://svn.asterisk.org/svn/asterisk/branches/10
........
Merged revisions 379790 from http://svn.asterisk.org/svn/asterisk/branches/11
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@379791 65c4cc65-6c06-0410-ace0-fbb531ad65f3
This provides a JSON API by pulling in and wrapping the Jansson JSON
library[1]. The Asterisk API basically mirrors the Jansson
functionality, with a few minor tweaks.
* Some names have been asteriskified to protect the innocent.
* Jansson provides both reference-stealing and reference-borrowing
versions of several API's. The Asterisk API is exclusively
reference-stealing for operations that put elements into arrays and
objects.
* No support for doubles, since we usually don't need that.
* Coming along for the ride is the ast_test_validate macro, which made
the unit tests much easier to write.
[1]: http://www.digip.org/jansson/
(issue ASTERISK-20887)
(closes issue ASTERISK-20888)
Review: https://reviewboard.asterisk.org/r/2264/
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@378915 65c4cc65-6c06-0410-ace0-fbb531ad65f3
This is an interesting feature that allows additional strings to be used to
search the Directory, primarily intended to be used with nicknames, but could
be used with affiliations and the like. Because the name field is used in
more than one place (such as email notifications), it is important that these
additional strings not be placed in the name field, but be specified
separately.
Review: https://reviewboard.asterisk.org/r/2244/
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@378414 65c4cc65-6c06-0410-ace0-fbb531ad65f3
In ASTERISK-20726 UUID was added to Asterisk. This commit is to add the dependancies to the install script
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@378259 65c4cc65-6c06-0410-ace0-fbb531ad65f3
Update and extend the configuration_file group and enable linking. Commit other cleanups from multi-version Doxygen testing. Update title that was left behind many years ago.
(issue ASTERISK-20259)
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@375182 65c4cc65-6c06-0410-ace0-fbb531ad65f3
During testing I used an alternate output directory and mistakenly committed it. Matt Jordan noticed and I reverted. This is the correct setting for local output to match with all branches.
(issue ASTERISK-20259)
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@374948 65c4cc65-6c06-0410-ace0-fbb531ad65f3
Add Doxygen to the Debian install list. I will check for other platforms like Red Hat
(issue ASTERISK-20259)
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@374897 65c4cc65-6c06-0410-ace0-fbb531ad65f3
Revert a local testing config that I made. This was not intended to be committed.
Thank you Matt Jordan for noticing this.
(issue ASTERISK-20259)
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@374879 65c4cc65-6c06-0410-ace0-fbb531ad65f3
* Whitespace, doc-blocks, spelling, case, missing and incorrect tags.
* Add cleanup to Makefile for the Doxygen configuration update
* Start updating Doxygen configuration for cleaner output
* Enable inclusion of configuration files into documentation
* remove mantisworkflow...
* update documentation README
* Add markup to Tilghman's email and talk with him about updating his email, he knows...
* no code changes on this commit other than the mentioned Makefile change
(issue ASTERISK-20259)
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@373384 65c4cc65-6c06-0410-ace0-fbb531ad65f3
This annoying update is almost totally whitespace and updated config comments. I did add Python to the documented file types.
(issue ASTERISK-20259)
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@373341 65c4cc65-6c06-0410-ace0-fbb531ad65f3
All voicemails now have a 'msg_id' included in their metadata. The ODBC
message storage backend now requires this column; as such, the MySQL contrib
script that creates the voicemail_data table has been updated with the appropriate
column information.
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@370820 65c4cc65-6c06-0410-ace0-fbb531ad65f3
This patch changes the Asterisk configure script and build system to detect
the presence of the NetBSD editline library (libedit) on the system. If it is
found, it will be used in preference to the version included in the Asterisk
source tree.
(closes issue ASTERISK-18725)
Reported by: Jeffrey C. Ollie
Review: https://reviewboard.asterisk.org/r/1528/
Patches:
0001-Allow-linking-building-against-an-external-editline.patch uploaded by jcollie (license #5373) (heavily modified by kpfleming)
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@370481 65c4cc65-6c06-0410-ace0-fbb531ad65f3
contrib/scripts/live_ast currently assumes that it is being run from the
top-level directory of the source tree. It creates a script that will
also set the working directory.
This fix avoids the need to set the working directory if the caller sets
LIVE_AST_BASE_DIR instead.
It relies on realpath for that. If realpath is not available, it will
fall back to the original behaviour.
Review: https://reviewboard.asterisk.org/r/2027/
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@370048 65c4cc65-6c06-0410-ace0-fbb531ad65f3
Presence support has been added. This is accomplished by
allowing for presence hints in addition to device state
hints. A dialplan function called PRESENCE_STATE has been
added to allow for setting and reading presence. Presence
can be transmitted to Digium phones using custom XML
elements in a PIDF presence document.
Voicemail has new APIs that allow for moving, removing,
forwarding, and playing messages. Messages have had a new
unique message ID added to them so that the APIs will work
reliably. The state of a voicemail mailbox can be obtained
using an API that allows one to get a snapshot of the mailbox.
A voicemail Dialplan App called VoiceMailPlayMsg has been
added to be able to play back a specific message.
Configuration hooks have been added. Configuration hooks
allow for a piece of code to be executed when a specific
configuration file is loaded by a specific module. This is
useful for modules that are dependent on the configuration
of other modules.
chan_sip now has a public method that allows for a custom
SIP INFO request to be sent mid-dialog. Digium phones use
this in order to display progress bars when files are played.
Messaging support has been expanded a bit. The main
visible difference is the addition of an AMI action
MessageSend.
Finally, a ParkingLots manager action has been added in order
to get a list of parking lots.
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@368435 65c4cc65-6c06-0410-ace0-fbb531ad65f3
actually remove res_ais. This commit removes it.
In addition, the 'install_prereq' script has been updated to no longer install
AIS dependency packages, and instead install Corosync packages instead.
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@354459 65c4cc65-6c06-0410-ace0-fbb531ad65f3
This patch is based on the one by David Vossel, developer extrodinaire, at
https://reviewboard.asterisk.org/r/344/. If multiple peers are defined with the
same host/port, but differing callbackextensions, it chooses the peer with the
matching callbackextension. Since callbackextension creates an outbound
registration with the callbackextension as the Contact address, matching an
incoming request by that (in addition to the host/port) makes a lot of sense.
This patch also adds support for callbackextension to realtime by querying all
peers with callbackextensions on reload and adding registrations for them.
(closes issue ASTERISK-13456)
Review: https://reviewboard.asterisk.org/r/344/
Review: https://reviewboard.asterisk.org/r/1717/
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@354458 65c4cc65-6c06-0410-ace0-fbb531ad65f3
be empty, don't check for it, instead of check if LD_LIBRARY_PATH is
already set and if so, append LIVE_AST_LD_PATH_EXTRA properly.
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@354314 65c4cc65-6c06-0410-ace0-fbb531ad65f3
........
r350788 | kpfleming | 2012-01-14 09:22:33 -0600 (Sat, 14 Jan 2012) | 8 lines
Ensure that two prerequisites are properly installed on Debian-style distributions.
* Don't specify a specific version of libgmime; newer versions are available
now and acceptable.
* Install libsrtp so that res_srtp can be built.
........
r350789 | kpfleming | 2012-01-14 09:23:32 -0600 (Sat, 14 Jan 2012) | 3 lines
Correct some 'set-but-not-used' variable warnings.
........
Merged revisions 350788-350789 from http://svn.asterisk.org/svn/asterisk/branches/1.8
........
Merged revisions 350790 from http://svn.asterisk.org/svn/asterisk/branches/10
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@350791 65c4cc65-6c06-0410-ace0-fbb531ad65f3
........
r350127 | rmudgett | 2012-01-09 12:40:33 -0600 (Mon, 09 Jan 2012) | 12 lines
Update contrib script live_ast to invoke Asterisk with valgrind and suppression file.
* Added valgrind_compare script to compare two valgrind log files for
differences.
(issue ASTERISK-17339)
Reported by: Tzafrir Cohen
Patches:
valgrind_compare (license #5035) script uploaded by Tzafrir Cohen
live_ast_valgrind.diff (license #5035) patch uploaded by Tzafrir Cohen
live_ast_valgrind_v2.diff (license #5185) patch uploaded by Paul Belanger
........
r350128 | rmudgett | 2012-01-09 12:54:56 -0600 (Mon, 09 Jan 2012) | 11 lines
live_ast: valgrind: run asterisk under valgrind
Adds a new sub-command, "valgrind" to live_ast. It runs asterisk under
valgrind. The extra command-line parameters are passed to Asterisk as
usual, and parameters to valgrind are passed through LIVE_AST_VALGRIND_ARGS
in live.conf .
Review: https://reviewboard.asterisk.org/r/1109/
Merged revisions 326636 from http://svn.asterisk.org/svn/asterisk/branches/10
........
Merged revisions 350127-350128 from http://svn.asterisk.org/svn/asterisk/branches/1.8
........
Merged revisions 350129 from http://svn.asterisk.org/svn/asterisk/branches/10
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@350130 65c4cc65-6c06-0410-ace0-fbb531ad65f3
Added information collection from the output of the utilities: top, free, uptime, ifconfig
Added information collection from the output of the Asterisk command 'dahdi show status'
Added option / flag '-n, --non-interactive'
Updated man page to reflect new option / flag '-n, --non-interactive'
Patch-by: John Bigelow (itzanger)
(closes issue AST-749)
........
Merged revisions 349504 from http://svn.asterisk.org/svn/asterisk/branches/1.8
........
Merged revisions 349505 from http://svn.asterisk.org/svn/asterisk/branches/10
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@349506 65c4cc65-6c06-0410-ace0-fbb531ad65f3
This patch allows the imapserver, imapport, and imapflags settings to be
overridden for any voicemail user. It also documents the settings in
the sample voicemail.conf file, and updates the voicemail schema to
allow storage of those columns.
(closes issue ASTERISK-16489)
Reporter: Hubert Mickael
Tested by: Matt Jordan
Review: https://reviewboard.asterisk.org/r/1614/
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@349106 65c4cc65-6c06-0410-ace0-fbb531ad65f3
environment variables and also enables a custom run directory for asterisk
(instead of defaulting to /tmp).
Patch by: Byron Clark (byronclark)
(closes ASTERISK-17810)
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@348698 65c4cc65-6c06-0410-ace0-fbb531ad65f3
This patch adds two new menu features to app_confbridge, admin_toggle_menu_
participants and participant_count. The admin action will globally mute /
unmute all non-admin participants on a converence, while the participant
count simply exposes the existing participant count function to the
conference bridge menu.
This also adds configuration options to change the sound played when the
conference is globally muted / unmuted, as well as the necessary config
hooks to place these functions in the DTMF menus.
(closes issue ASTERISK-18204)
Reported by: Kevin Reeves
Tested by: Matt Jordan
Patches:
app_confbridge.c.patch.txt, conf_config_parser.c.patch.txt,
confbridge.h.patch.txt uploaded by Kevin Reeves (license 6281)
Review: https://reviewboard.asterisk.org/r/1518/
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@345560 65c4cc65-6c06-0410-ace0-fbb531ad65f3
This option is not only useless, but has been broken since inception since
the flag was never copied from the peer where it is set to the pvt where
it was checked. RFC 3261 specificially states that you should not send a
provisional response to a non-INVITE request, and if we did fix the code
so that it worked, it would cause the same kind of user enumeration
vulnerability that we've discussed with the nat= setting. This patch
removes registertrying option and any code that would have sent a 100
response to a register.
Review: https://reviewboard.asterisk.org/r/1562/
........
Merged revisions 343220 from http://svn.asterisk.org/svn/asterisk/branches/1.8
........
Merged revisions 343221 from http://svn.asterisk.org/svn/asterisk/branches/10
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@343222 65c4cc65-6c06-0410-ace0-fbb531ad65f3
https://origsvn.digium.com/svn/asterisk/branches/1.8
........
r337115 | lmadsen | 2011-09-20 17:18:25 -0500 (Tue, 20 Sep 2011) | 7 lines
Update RedHat Init script to work with Heartbeat.
The current RedHat init script was not LSB compatible. This change will make it LSB compatible so that
it can work correctly with Heartbeat.
(Closes issue ASTERISK-18253)
Reported by: c0rnoTa
........
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@337117 65c4cc65-6c06-0410-ace0-fbb531ad65f3
This permits the list of codecs to be specified in one configuration line,
instead of two or more, generally with the aim of either allowing all codecs
with the exception of a few or disallowing most but permitting a few.
Review: https://reviewboard.asterisk.org/r/1411/
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@334574 65c4cc65-6c06-0410-ace0-fbb531ad65f3
Adds a new sub-command, "valgrind" to live_ast. It runs asterisk under
valgrind. The extra command-line parameters are passed to Asterisk as
usual, and parameters to valgrind are passed through LIVE_AST_VALGRIND_ARGS
in live.conf .
Review: https://reviewboard.asterisk.org/r/1109/
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@326636 65c4cc65-6c06-0410-ace0-fbb531ad65f3
Several variables in the script control which files are converted and the
source and destination formats.
Patch-by: Trey Blancher <support@digium.com>
(closes AST-560)
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@326368 65c4cc65-6c06-0410-ace0-fbb531ad65f3
https://origsvn.digium.com/svn/asterisk/branches/1.8
................
r307536 | qwell | 2011-02-10 16:39:30 -0600 (Thu, 10 Feb 2011) | 22 lines
Merged revisions 307535 via svnmerge from
https://origsvn.digium.com/svn/asterisk/branches/1.6.2
................
r307535 | qwell | 2011-02-10 16:35:49 -0600 (Thu, 10 Feb 2011) | 15 lines
Merged revisions 307534 via svnmerge from
https://origsvn.digium.com/svn/asterisk/branches/1.4
........
r307534 | qwell | 2011-02-10 16:33:09 -0600 (Thu, 10 Feb 2011) | 8 lines
Remove color when executing commands via a remote console.
Essentially this makes '-x' imply '-n' on rasterisk. This was done in a
different and incomplete way previously, which I'm reverting here.
(issue #18776)
Reported by: alecdavis
........
................
................
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@307537 65c4cc65-6c06-0410-ace0-fbb531ad65f3
https://origsvn.digium.com/svn/asterisk/branches/1.8
................
r292787 | lmadsen | 2010-10-22 16:28:43 -0500 (Fri, 22 Oct 2010) | 21 lines
Merged revisions 292786 via svnmerge from
https://origsvn.digium.com/svn/asterisk/branches/1.6.2
........
r292786 | lmadsen | 2010-10-22 16:16:12 -0500 (Fri, 22 Oct 2010) | 13 lines
Update the LDIF file for LDAP.
The LDIF file asterisk.ldif was quite a bit out of date from the asterisk.ldap-schema file, so I've
now updated that to be in sync. The asterisk.ldif file being out of sync was a problem on my systems
where I was doing an ldapadd to import the schema into the LDAP database, and the existing file
would cause problems and ERROR messages when registering.
Additional documention has been added based on feedback in the issue I'm closing.
(closes issue #13861)
Reported by: scramatte
Patches:
ldap-update.txt uploaded by lmadsen (license 10)
Tested by: lmadsen, jcovert, suretec, rgenthner
........
................
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@292788 65c4cc65-6c06-0410-ace0-fbb531ad65f3
https://origsvn.digium.com/svn/asterisk/branches/1.8
........
r292740 | twilson | 2010-10-22 09:49:34 -0700 (Fri, 22 Oct 2010) | 45 lines
Add TLS cert helper script
This script is useful for quickly generating self-signed CA, server, and client
certificates for use with Asterisk. It is still recommended to obtain
certificates from a recognized Certificate Authority and to develop an
understanding how SSL certificates work. Real security is hard work.
OPTIONS:
-h Show this message
-m Type of cert "client" or "server". Defaults to server.
-f Config filename (openssl config file format)
-c CA cert filename (creates new CA cert/key as ca.crt/ca.key if not passed)
-k CA key filename
-C Common name (cert field)
For a server cert, this should be the same address that clients
attempt to connect to. Usually this will be the Fully Qualified
Domain Name, but might be the IP of the server. For a CA or client
cert, it is merely informational. Make sure your certs have unique
common names.
-O Org name (cert field)
An informational string (company name)
-o Output filename base (defaults to asterisk)
-d Output directory (defaults to the current directory)
Example:
To create a CA and a server (pbx.mycompany.com) cert with output in /tmp:
ast_tls_cert -C pbx.mycompany.com -O "My Company" -d /tmp
This will create a CA cert and key as well as asterisk.pem and the the two
files that it is made from: asterisk.crt and asterisk.key. Copy asterisk.pem
and ca.crt somewhere (like /etc/asterisk) and set tlscertfile=/etc/asterisk.pem
and tlscafile=/etc/ca.crt. Since this is a self-signed key, many devices will
require you to import the ca.crt file as a trusted cert.
To create a client cert using the CA cert created by the example above:
ast_tls_cert -m client -c /tmp/ca.crt -k /tmp/ca.key -C "Joe User" -O \
"My Company" -d /tmp -o joe_user
This will create client.crt/key/pem in /tmp. Use this if your device supports
a client certificate. Make sure that you have the ca.crt file set up as
a tlscafile in the necessary Asterisk configs. Make backups of all .key files
in case you need them later.
........
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@292743 65c4cc65-6c06-0410-ace0-fbb531ad65f3
https://origsvn.digium.com/svn/asterisk/branches/1.4
........
r269334 | pabelanger | 2010-06-09 13:24:53 -0400 (Wed, 09 Jun 2010) | 12 lines
Fix Debian init script to not use -c.
When using the init script as-is currently, it could cause issues on Debian
such as high CPU usage. This fix has worked for several people so I'm
implementing the change. We now handle color displays properly.
(closes issue #16784)
Reported by: pabelanger
Patches:
20100530__issue16784__2.diff.txt uploaded by tilghman (license 14)
Tested by: pabelanger, tilghman
........
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@269346 65c4cc65-6c06-0410-ace0-fbb531ad65f3
David M. Lee
Michael L. Young
Matthew Jordan
Kinsey Moore
Andrew Latham
Jason Parker
Tilghman Lesher
Richard Mudgett
Russell Bryant
Jonathan Rose
Kevin P. Fleming
Igor Goncharovskiy
Tzafrir Cohen
Mark Michelson
Terry Wilson
Sean Bright
Stefan Schmidt
Matthew Nicholson
Walter Doekes
Gregory Nietsky
Leif Madsen
Paul Belanger
David Ruggles
David Vossel