This patch does three things:
1. It provides a Surrogate channel technology with a consolidated
"implementation detail flag" on the channel technology. This tells
consumers of Stasis that the creation of this channel is an implementation
detail in Asterisk and can be ignored (if they so choose). This
consolidates the conference recorder/announcer flags as well - these flags
had no additional meaning beyond "ignore this channel please".
2. It modifies allocation of a channel in two ways:
(a) If a channel technology can be determined from the name, we set it
directly in the allocation routine. This prevents the initial
publication of the message from going out with a NULL channel technology
where possible. This lets Stasis consumers get the right channel
technology on the first publication.
(b) It reorganizes allocation to make use of the 'finalized' property on the
channel. This was already used to know that a channel had completely
finished its construction in the masquerade routine; now we also use it
to know whether or not the setting of certain channel properties is
occurring during or post construction. The various set routines were
modified accordingly as well.
3. The masquerade event is now dead, Jim. It no longer served any purpose
whatsoever - if you perform a call pickup you'll get a Pickup event;
if you perform an attended transfer you will still get those events; if you
steal a channel to put it elsewhere you'll get the corresponding NewExten or
BridgeEnter events.
Review: https://reviewboard.asterisk.org/r/2740
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@396392 65c4cc65-6c06-0410-ace0-fbb531ad65f3
This patch implements the controls from ARI recordings. The controls
are:
* DELETE /recordings/live/{recordingName} - stop recording and
discard it
* POST /recordings/live/{recordingName}/stop - stop recording
* POST /recordings/live/{recordingName}/pause - pause recording
* POST /recordings/live/{recordingName}/unpause - resume recording
* POST /recordings/live/{recordingName}/mute - mute recording (record
silence to the file)
* POST /recordings/live/{recordingName}/unmute - unmute recording.
Since this underlying functionality did not already exist, is was
added to app.c by a set of control frames, similar to how playback
control works. The pause/mute control frames are toggles, even though
the ARI controls are idempotent, to be consistent with the playback
control frames.
(closes issue ASTERISK-22181)
Review: https://reviewboard.asterisk.org/r/2697/
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@396331 65c4cc65-6c06-0410-ace0-fbb531ad65f3
The Stasis changes in r395954 had an unanticipated side effect: messages
published directly to an _all topic does not get forwarded to the
corresponding caching topic.
This patch fixes that by changing how caching topics forward messages,
and how the caching pattern forwards are setup.
For the caching pattern, the all_topic is forwarded to the
all_topic_cached. This forwards messages published directly to the
all_topic to all_topic_cached.
In order to avoid duplicate messages on all_topic_cached, caching topics
were changed to no longer forward uncached messages. Subscribers to an
individual caching topic should only expect to receive cache updates,
and subscription change messages. Since individual caching topics are
new, this shouldn't be a problem.
There are a few minor changes to the pre-cache split behavior.
* For topics changed to use the caching pattern, the all_topic_cached
will forward snapshots in addition to cache updates. Since
subscribers by design ignore unexpected messages, this should be
fine.
* Caching topics that don't use the caching pattern no longer forward
non-cache updates. This makes no difference for the current caching
topics.
* mwi_topic_cached, channel_by_name_topic and
presence_state_topic_cached have no subscribers
* device_state_topic_cached's only subscriber only processes cache
udpates
(issue ASTERISK-22243)
Review: https://reviewboard.asterisk.org/r/2738
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@396329 65c4cc65-6c06-0410-ace0-fbb531ad65f3
Dial and Queue would previously apply a new set of features whenever
bridging. These options would be based purely on the options supplied
to the dial/queue applications. This patch changes the function those
applications use to bridge calls so that the features will be added
to the set of existing features for each channel rather than having
them override the existing features.
(closes issue ASTERISK-22209)
Reported by: Jonathan Rose
Review: https://reviewboard.asterisk.org/r/2713/
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@396245 65c4cc65-6c06-0410-ace0-fbb531ad65f3
Roles are now cleared with each entry into a bridge with addChannel.
If the roles parameter is present, the role specified will be applied
to all channels being added with the addChannel command.
(closes issue ASTERISK-21973)
Reported by: Matt Jordan
https://reviewboard.asterisk.org/r/2691/
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@396182 65c4cc65-6c06-0410-ace0-fbb531ad65f3
The new res_ari_asterisk.so module presents several config options
from asterisk main. Unfortunately, they aren't exported, so the module
won't load on Linux.
This patch renames the variables, adding the ast_ prefix so they will
be exported.
Review: https://reviewboard.asterisk.org/r/2737
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@396166 65c4cc65-6c06-0410-ace0-fbb531ad65f3
* BridgeEnter now contains the unique ID of the channel that is to be swapped out, if applicable.
* There is a ParkedCallSwap event that is sent when a parked channel has a new channel take its place.
(closes issue ASTERISK-22193)
reported by Mark Michelson
Review: https://reviewboard.asterisk.org/r/2712
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@396107 65c4cc65-6c06-0410-ace0-fbb531ad65f3
This moves ast_str_container_alloc, ast_str_container_add,
ast_str_container_remove, and related private functions into
strings.c/h since they really don't belong in astobj2.c/h.
As a result of this move, utils also had to be updated.
Review: https://reviewboard.asterisk.org/r/2719/
(closes issue ASTERISK-22041)
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@396105 65c4cc65-6c06-0410-ace0-fbb531ad65f3
This commit is smaller than the initial review placed on review board. This is because
a change to allow for channel drivers to access parking functionality externally was
committed and invalidated quite a few of the changes initially made.
(closes issue ASTERISK-22039)
reported by Matt Jordan
Review: https://reviewboard.asterisk.org/r/2717
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@396103 65c4cc65-6c06-0410-ace0-fbb531ad65f3
This patch does the following:
* It moves the pickup code out of features.c and into pickup.c
* It removes the vast majority of dead code out of features.c. In particular,
this includes the parking code.
(issue ASTERISK-22134)
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@396060 65c4cc65-6c06-0410-ace0-fbb531ad65f3
This patch does the following:
* It adds support for externally initiated parking requests. In particular,
chan_skinny has a protocol level message that initiates a call park.
This patch now supports that option, as well as the protocol specific
mechanisms in chan_dahdi/sig_analog and chan_mgcp.
* A parking bridge features virtual table has been added that provides
access to the parking functionality that the Bridging API needs. This
includes requests to park an entire 'call' (with little or no additional
information, thank you chan_skinny), perform a blind transfer to a parking
extension, determine if an extension is a parking extension, as well as the
actual "do the parking" request from the Bridging API.
* Refactoring in chan_mgcp, chan_skinny, and chan_dahdi to make use of the new
functions
* The removal of some - but not all - dead parking code from features.c
This also fixed blind transferring a multi-party bridge to a parking lot (which
was implemented, but had at least one code path where using the parking features
kK might not have worked)
Review: https://reviewboard.asterisk.org/r/2710
(closes issue ASTERISK-22134)
Reported by: Matt Jordan
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@396028 65c4cc65-6c06-0410-ace0-fbb531ad65f3
This prevents XML documentation duplication by expanding channel and
bridge snapshot tags into channel and bridge snapshot parameter sets
with a given prefix or defaulting to no prefix. This also prevents
documentation from becoming fractured and out of date by keeping all
variations of the documentation in template form such that it only
needs to be updated once and keeps maintenance to a minimum.
Review: https://reviewboard.asterisk.org/r/2708/
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@395985 65c4cc65-6c06-0410-ace0-fbb531ad65f3
In working with res_stasis, I discovered a significant limitation to
the current structure of stasis_caching_topics: you cannot subscribe
to cache updates for a single channel/bridge/endpoint/etc.
To address this, this patch splits the cache away from the
stasis_caching_topic, making it a first class object. The stasis_cache
object is shared amongst individual stasis_caching_topics that are
created per channel/endpoint/etc. These are still forwarded to global
whatever_all_cached topics, so their use from most of the code does
not change.
In making these changes, I noticed that we frequently used a similar
pattern for bridges, endpoints and channels:
single_topic ----------------> all_topic
^
|
single_topic_cached ----+----> all_topic_cached
|
+----> cache
This pattern was extracted as the 'Stasis Caching Pattern', defined in
stasis_caching_pattern.h. This avoids a lot of duplicate code between
the different domain objects.
Since the cache is now disassociated from its upstream caching topics,
this also necessitated a change to how the 'guaranteed' flag worked
for retrieving from a cache. The code for handling the caching
guarantee was extracted into a 'stasis_topic_wait' function, which
works for any stasis_topic.
(closes issue ASTERISK-22002)
Review: https://reviewboard.asterisk.org/r/2672/
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@395954 65c4cc65-6c06-0410-ace0-fbb531ad65f3
The general gist is to have a clear boundary between old SIP stuff
and new SIP stuff by having the word "SIP" for old stuff and "PJSIP"
for new stuff. Here's a brief rundown of the changes:
* The word "Gulp" in dialstrings, functions, and CLI commands is now
"PJSIP"
* chan_gulp.c is now chan_pjsip.c
* Function names in chan_gulp.c that were "gulp_*" are now "chan_pjsip_*"
* All files that were "res_sip*" are now "res_pjsip*"
* The "res_sip" directory is now "res_pjsip"
* Files in the "res_pjsip" directory that began with "sip_*" are now "pjsip_*"
* The configuration file is now "pjsip.conf" instead of "res_sip.conf"
* The module info for all PJSIP-related files now uses "PJSIP" instead of "SIP"
* CLI and AMI commands created by Asterisk's PJSIP modules now have "pjsip" as
the starting word instead of "sip"
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@395764 65c4cc65-6c06-0410-ace0-fbb531ad65f3
This renames all files and API calls from several variants of
Stasis-HTTP to ARI including:
* Stasis-HTTP -> ARI
* STASIS_HTTP -> ARI
* stasis_http -> ari (ast_ari for global symbols, file names as well)
* stasis http -> ARI
Review: https://reviewboard.asterisk.org/r/2706/
(closes issue ASTERISK-22136)
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@395603 65c4cc65-6c06-0410-ace0-fbb531ad65f3
Most hook callbacks did not need the bridge parameter. The pointer value
could become invalid if the channel is moved to another bridge while it is
executing.
* Fixed some issues in feature_attended_transfer() as a result.
* Reduce the bridge inhibit count in
attended_transfer_properties_shutdown() after it has restored the bridge
channel hooks.
* Removed basic bridge requirement on feature_blind_transfer(). It does
not require the basic bridge like feature_attended_transfer().
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@395574 65c4cc65-6c06-0410-ace0-fbb531ad65f3
* Fixed feature limits to not use special members of struct
ast_bridge_features.
* Fixed memory leak in off nominal paths of bridge_builtin_set_limits().
* Fixed off nominal path in ast_bridge_features_limits_construct() freeing
unallocated memory if it was not called by bridge_builtin_set_limits().
* Made bridge_builtin_interval_features.so unloadable.
* Simplified parking's use of its duration interval hook.
* Made BridgeWait S option not depend upon another module being loaded.
(closes issue ASTERISK-22107)
Reported by: Matt Jordan
Review: https://reviewboard.asterisk.org/r/2701/
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@395559 65c4cc65-6c06-0410-ace0-fbb531ad65f3
Changes arguments for BridgeWait from BridgeWait(role, options) to
BridgeWait(bridge_name, role, options). Now multiple holding bridges may
be created and referenced by this application.
(closes issue ASTERISK-21922)
Reported by: Matt Jordan
Review: https://reviewboard.asterisk.org/r/2642/
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@395509 65c4cc65-6c06-0410-ace0-fbb531ad65f3
This patch renames the bridging* files to bridge*. This may seem pedantic
and silly, but it fits better in line with current Asterisk naming conventions:
* channel is not "channeling"
* monitor is not "monitoring"
etc.
A bridge is an object. It is a first class citizen in Asterisk. "Bridging" is
the act of using a bridge on a set of channels - and the API that fulfills that
role is more than just the action.
(closes issue ASTERISK-22130)
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@395378 65c4cc65-6c06-0410-ace0-fbb531ad65f3
* Convert interval timers to use the ast_waitfor_nandfds() timeout.
* Remove bridge channel action for intervals. Now the main loop handles
running interval hooks.
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@395340 65c4cc65-6c06-0410-ace0-fbb531ad65f3
* Reduced the number of hook containers to just dtmf_hooks,
interval_hooks, and other_hooks. As a result, several functions dealing
with the different hook containers could be combined.
* Extended the generic hook struct for DTMF and interval hooks instead of
using a variant record.
* Merged the special talk detector hook into the other_hooks container.
* Replaced ast_bridge_features_set_talk_detector() with
ast_bridge_talk_detector_hook().
(issue ASTERISK-22107)
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@395322 65c4cc65-6c06-0410-ace0-fbb531ad65f3
This patch does the following:
* It pulls out bridge_channel and puts it into its own translation unit
* It adds public and protected headers for bridging_channel. Protected
functions are appropriate only for the Bridging API and sub-classes of a
bridge.
(issue ASTERISK-22130)
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@395253 65c4cc65-6c06-0410-ace0-fbb531ad65f3
This greatly modifies the operation of DTMF attended transfers so that
the full range of options from features.conf applies.
In addition, a new option has been added that allows for a transferer
to switch between bridges during a transfer before completing the
transfer.
(closes issue ASTERISK-21543)
reported by Matt Jordan
Review: https://reviewboard.asterisk.org/r/2654
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@395151 65c4cc65-6c06-0410-ace0-fbb531ad65f3
This patch introduces DTLS-SRTP support to chan_pjsip and the options
necessary to configure it including an option to allow choosing between
32 and 80 byte SRTP tag lengths.
During the implementation and testing of this patch, three other bugs
were found and their fixes are included with this patch. The two in
chan_sip were a segfault relating to DTLS setup and mistaken call
rejection. The third bug fix prevents chan_pjsip from attempting to
perform bridge optimization between two endpoints if either of them is
running any form of SRTP.
Review: https://reviewboard.asterisk.org/r/2683/
(closes issue ASTERISK-21419)
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@395121 65c4cc65-6c06-0410-ace0-fbb531ad65f3
The stasis_cache_update messages are somewhat cumbersome to handle
with the stasis_message_router. Since all updates have the same
message type, they are normally handled with the same route.
Since caching itself is a first class component of stasis-core, it
makes sense for the router to handle the cache update messages itself.
This patch adds stasis_message_router_add_cache_update() and
stasis_message_router_remove_cache_update() to handle the routing of
stasis_cache_update messages.
This patch also corrects an issue with manager_{bridging,channels}.c,
where events might be reordered. The reordering occurs because the
components use different message routers, which they needed because
they both needed to route cache update messages. They now both use
manager's router, and add cache routes for just the cache updates they
are interested in.
(closes issue ASTERISK-22038)
Review: https://reviewboard.asterisk.org/r/2677/
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@395118 65c4cc65-6c06-0410-ace0-fbb531ad65f3
This adds a new CEL event type, AST_CEL_LOCAL_OPTIMIZE, to represent
local channel optimizations. Local channel optimizations were one of
several things conveyed by the now defunct BRIDGE_UPDATE event type.
This also adds a unit test to test generation of this new CEL event.
Review: https://reviewboard.asterisk.org/r/2676/
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@394870 65c4cc65-6c06-0410-ace0-fbb531ad65f3
This adds CEL support for blind and attended transfers and call pickup.
During the course of adding this functionality I noticed that
CONF_ENTER, CONF_EXIT, and BRIDGE_TO_CONF events are particularly
useless without a bridge identifier, so I added that as well.
This adds tests for blind transfers, several types of attended
transfers, and call pickup.
The extra field in CEL records now consists of a JSON blob whose fields
are defined on a per-event basis.
Review: https://reviewboard.asterisk.org/r/2658/
(closes issue ASTERISK-21565)
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@394858 65c4cc65-6c06-0410-ace0-fbb531ad65f3
Moved the OBJ_POINTER, OBJ_KEY, and OBJ_PARTIAL_KEY flags together into a
field and renamed them to OBJ_SEARCH_OBJECT, OBJ_SEARCH_KEY, and
OBJ_SEARCH_PARTIAL_KEY respectively. The values were selected to keep
existing code compiling and working until the codebase can be changed to
stop using these values as bit flags and use them as an enum field.
The old names are defined to the new names for backward compatibility.
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@394846 65c4cc65-6c06-0410-ace0-fbb531ad65f3
* Made ast_audiohook_detach_list() and ast_audiohook_write_list_empty()
NULL tolerant.
* Made ast_audiohook_detach_list() return void since it is a destructor.
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@394836 65c4cc65-6c06-0410-ace0-fbb531ad65f3
Adds a new channel driver for creating channels for specific purposes
in bridges, primarily to act as either recorders or announcers. Adds
ARI commands for playing announcements to ever participant in a bridge
as well as for recording a bridge. This patch also includes some
documentation/reponse fixes to related ARI models such as playback
controls.
(closes issue ASTERISK-21592)
Reported by: Matt Jordan
(closes issue ASTERISK-21593)
Reported by: Matt Jordan
Review: https://reviewboard.asterisk.org/r/2670/
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@394809 65c4cc65-6c06-0410-ace0-fbb531ad65f3
This adds new flags to the channel tech properties that flag it as
different types of implementation detail used exclusively to provide a
feature. Examples of channels that would have these flags include the
announcement and recording channels used by confbridge which are the
only two marked as such by this patch.
Review: https://reviewboard.asterisk.org/r/2633/
(closes issue ASTERISK-21873)
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@394808 65c4cc65-6c06-0410-ace0-fbb531ad65f3
Since ast_hangup() is effectively a channel destructor, it should be a
void function.
* Make the few silly callers checking the return value no longer do so.
Only the CDR and CEL unit tests checked the return value.
* Make all callers take advantage of the NULL safe change and remove the
NULL check before the call.
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@394623 65c4cc65-6c06-0410-ace0-fbb531ad65f3
The ill conceived chan_agent is no more. It is now replaced by
app_agent_pool.
Agents login using the AgentLogin() application as before. The
AgentLogin() application no longer does any authentication.
Authentication is now the responsibility of the dialplan. (Besides, the
authentication done by chan_agent did not match what the voice prompts
asked for.)
Sample extensions.conf
[login]
; Sample agent 1001 login
; Set COLP for in between calls so the agent does not see the last caller COLP.
exten => 1001,1,Set(CONNECTEDLINE(all)="Agent Waiting" <1001>)
; Give the agent DTMF transfer and disconnect features when connected to a caller.
same => n,Set(CHANNEL(dtmf-features)=TX)
same => n,AgentLogin(1001)
same => n,NoOp(AGENT_STATUS is ${AGENT_STATUS})
same => n,Hangup()
[caller]
; Sample caller direct connect to agent 1001
exten => 800,1,AgentRequest(1001)
same => n,NoOp(AGENT_STATUS is ${AGENT_STATUS})
same => n,Hangup()
; Sample caller going through a Queue to agent 1001
exten => 900,1,Queue(agent_q)
same => n,Hangup()
Sample queues.conf
[agent_q]
member => Local/800@caller,,SuperAgent,Agent:1001
Under the hood operation overview:
1) Logged in agents wait for callers in an agents holding bridge.
2) Caller requests an agent using AgentRequest()
3) A basic bridge is created, the agent is notified, and caller joins the
basic bridge to wait for the agent.
4) The agent is either automatically connected to the caller or must ack
the call to connect.
5) The agent is moved from the agents holding bridge to the basic bridge.
6) The agent and caller talk.
7) The connection is ended by either party.
8) The agent goes back to the agents holding bridge.
To avoid some locking issues with the agent holding bridge, I needed to
make some changes to the after bridge callback support. The after bridge
callback is now a list of requested callbacks with the last to be added
the only active callback. The after bridge callback for failed callbacks
will always happen in the channel thread when the channel leaves the
bridging system or is destroyed.
(closes issue ASTERISK-21554)
Reported by: Matt Jordan
Review: https://reviewboard.asterisk.org/r/2657/
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@394417 65c4cc65-6c06-0410-ace0-fbb531ad65f3
This patch does the following:
* It adds a virtual table of callbacks to core_unreal. These callbacks can be
supplied by concrete implementations of "unreal" channel drivers, which lets
the unreal channel driver call specific functionality when it performs some
action. Currently, this is done to notify implementations when an
optimization operation has begun, and when an optimization operation has
succeeded.
* It adds Stasis-Core messages for Local channel bridging and Local channel
optimization. Local channel optimization is now two events: a Begin and an
End. Some consumers of Stasis-Core may want to know when an operation is
beginning so that they can 'prepare' their information; others will be more
concerned about when the operation has completed, so that they can 'fix up'
information. Stasis-Core allows for both, as does AMI.
Review: https://reviewboard.asterisk.org/r/2552
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@393801 65c4cc65-6c06-0410-ace0-fbb531ad65f3
This patch does the following:
* It adds a new soft hangup flag AST_SOFTHANGUP_HANGUP_EXEC that is set when a
channel is executing dialplan hangup logic, i.e., the 'h' extension or a
hangup handler. Stasis messages now also convey the soft hangup flag so
consumers of the messages can know when a channel is executing said
hangup logic.
* It adds a new channel flag, AST_FLAG_DEAD, which is set when a channel is
well and truly dead. Not just a zombie, but dead, Jim. Manager, CEL, CDRs,
and other consumers of Stasis have been updated to look for this flag to
know when the channel should by lying six feet under.
* The CDR engine has been updated to better handle a channel entering and
leaving a bridge. Previously, a new CDR was automatically created when a
channel left a bridge and put into the 'Pending' state; however, this
way of handling CDRs made it difficult for the 'endbeforehexten' logic to
work correctly - there was always a new CDR waiting in the hangup logic
and, even if 'ended', wouldn't be the CDR people wanted to inspect in the
hangup routine. This patch completely removes the Pending state and instead
defers creation of the new CDR until it gets a new message that requires
a new CDR.
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@393777 65c4cc65-6c06-0410-ace0-fbb531ad65f3
This patch does the following:
* It merges Jaco Kroon's patch from ASTERISK-20754, which provides channel
information in the RTCP events. Because Stasis provides a cache, Jaco's
patch was modified to pass the channel uniqueid to the RTP layer as
opposed to a pointer to the channel. This has the following benefits:
(1) It keeps the RTP engine 'clean' of references back to channels
(2) It prevents circular dependencies and other potential ref counting issues
* The RTP engine now allows any RTP implementation to raise RTCP messages.
Potentially, other implementations (such as res_rtp_multicast) could also
raise RTCP information. The engine provides structs to represent RTCP headers
and RTCP SR/RR reports.
* Some general refactoring in res_rtp_asterisk was done to try and tame the
RTCP code. It isn't perfect - that's *way* beyond the scope of this work -
but it does feel marginally better.
* A few random bugs were fixed in the RTCP statistics. (Example: performing an
assignment of a = a is probably not correct)
* We now raise RTCP events for each SR/RR sent/received. Previously we wouldn't
raise an event when we sent a RR report.
Note that this work will be of use to others who want to monitor call quality
or build modules that report call quality statistics. Since the events are now
moving across the Stasis message bus, this is far easier to accomplish. It is
also a first step (though by no means the last step) towards getting Olle's
pinefrog work incorporated.
Again: note that the patch by Jaco Kroon was modified slightly for this work;
however, he did all of the hard work in finding the right places to set the
channel in the RTP engine across the channel drivers. Much thanks goes to Jaco
for his hard work here.
Review: https://reviewboard.asterisk.org/r/2603/
(closes issue ASTERISK-20574)
Reported by: Jaco Kroon
patches:
asterisk-rtcp-channel.patch uploaded by jkroon (License 5671)
(closes issue ASTERISK-21471)
Reported by: Matt Jordan
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@393740 65c4cc65-6c06-0410-ace0-fbb531ad65f3
Legacy channel drivers often include the ability to set a default parking lot
on an endpoint basis; when channels are created for that endpoint, they inherit
the parkinglot option. Parking used to use this option more frequently; while
it is still supported, other options (such as using channel variables or
creation of a custom parkinglot) are supported. More importantly, conveying the
parkinglot information through a channel snapshot isn't terribly useful - it
is rarely (if ever) changed on a channel and some consumers of channel
snapshots, such as ARI, will never use the information.
(closes issue ASTERISK-21968)
Reported by: Matt Jordan
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@393716 65c4cc65-6c06-0410-ace0-fbb531ad65f3
This process also involved a large amount of rework regarding how to redial
the Parker when a channel leaves a parking lot due to timeout. An attended
transfer channel variable has been added to attended transfers to extensions
that will eventually park (but haven't at the time of transfer) as well.
This resolves one of the two BUGBUG comments remaining in res_parking.
(issues ASTERISK-21877)
Reported by: Matt Jordan
Review: https://reviewboard.asterisk.org/r/2638/
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@393704 65c4cc65-6c06-0410-ace0-fbb531ad65f3
The OneTouchRecord feature has historically been a toggle. This patch
adds the ability to make the OneTouchRecord hook optionally start/stop
recording only. If OneTouchRecord is already doing what is requested then
only the invoker hears the courtesy tone and/or start/stop recording
message.
The new feature is written so we could easily add explicit start/stop
recording DTMF hooks for Monitor and MixMonitor.
The majority of the changes in bridge_builtin_features.c is a refactoring
of the OneTouchRecord code (Monitor and MixMonitor versions) so it is easy
to direct the toggle/start/stop functionality.
Review: https://reviewboard.asterisk.org/r/2655/
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@393612 65c4cc65-6c06-0410-ace0-fbb531ad65f3
This patch is the first step in adding recording support to the
Asterisk REST Interface.
Recordings are stored in /var/spool/recording. Since recordings may be
destructive (overwriting existing files), the API rejects attempts to
escape the recording directory (avoiding issues if someone attempts to
record to ../../lib/sounds/greeting, for example).
(closes issue ASTERISK-21594)
(closes issue ASTERISK-21581)
Review: https://reviewboard.asterisk.org/r/2612/
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@393550 65c4cc65-6c06-0410-ace0-fbb531ad65f3
The appropriate settings for the Stasis threadpool is very system
specific, depending upon both workload and system configuration.
This patch adds a stasis.conf file which can be used to configure the
key attributes of the threadpool for the Stasis message bus.
(closes issue ASTERISK-21280)
Review: https://reviewboard.asterisk.org/r/2651/
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@393542 65c4cc65-6c06-0410-ace0-fbb531ad65f3
This patch started with the simple idea of changing the /events data
model to be more sane. The original model would send out events like:
{ "stasis_start": { "args": [], "channel": { ... } } }
The event discriminator was the field name instead of being a value in
the object, due to limitations in how Swagger 1.1 could model objects.
While technically sufficient in communicating event information, it was
really difficult to deal with in terms of client side JSON handling.
This patch takes advantage of a proposed extension[1] to Swagger which
allows type variance through the use of a discriminator field. This had
a domino effect that made this a surprisingly large patch.
[1]: https://groups.google.com/d/msg/wordnik-api/EC3rGajE0os/ey_5dBI_jWcJ
In changing the models, I also had to change the swagger_model.py
processor so it can handle the type discriminator and subtyping. I took
that a big step forward, and using that information to generate an
ari_model module, which can validate a JSON object against the Swagger
model.
The REST and WebSocket generators were changed to take advantage of the
validators. If compiled with AST_DEVMODE enabled, JSON objects that
don't match their corresponding models will not be sent out. For REST
API calls, a 500 Internal Server response is sent. For WebSockets, the
invalid JSON message is replaced with an error message.
Since this took over about half of the job of the existing JSON
generators, and the .to_json virtual function on messages took over the
other half, I reluctantly removed the generators.
The validators turned up all sorts of errors and inconsistencies in our
data models, and the code. These were cleaned up, with checks in the
code generator avoid some of the consistency problems in the future.
* The model for a channel snapshot was trimmed down to match the
information sent via AMI. Many of the field being sent were not
useful in the general case.
* The model for a bridge snapshot was updated to be more consistent
with the other ARI models.
Another impact of introducing subtyping was that the swagger-codegen
documentation generator was insufficient (at least until it catches up
with Swagger 1.2). I wanted it to be easier to generate docs for the API
anyways, so I ported the wiki pages to use the Asterisk Swagger
generator. In the process, I was able to clean up many of the model
links, which would occasionally give inconsistent results on the wiki. I
also added error responses to the wiki docs, making the wiki
documentation more complete.
Finally, since Stasis-HTTP will now be named Asterisk REST Interface
(ARI), any new functions and files I created carry the ari_ prefix. I
changed a few stasis_http references to ari where it was non-intrusive
and made sense.
(closes issue ASTERISK-21885)
Review: https://reviewboard.asterisk.org/r/2639/
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@393529 65c4cc65-6c06-0410-ace0-fbb531ad65f3
This patch moves the RESTful URL's around to more appropriate
locations for release.
The /stasis URL's are moved to /ari, since Asterisk REST Interface was
a more appropriate name than Stasis-HTTP. (Most of the code still has
stasis_http references, but they will be cleaned up after there are no
more outstanding branches that would have merge conflicts with such a
change).
A larger change was moving the ARI events WebSocket off of the shared
/ws URL to its permanent home on /ari/events. The Swagger code
generator was extended to handle "upgrade: websocket" and
"websocketProtocol:" attributes on an operation.
The WebSocket module was modified to better handle WebSocket servers
that have a single registered protocol handler. If a client
connections does not specify the Sec-WebSocket-Protocol header, and
the server has a single protocol handler registered, the WebSocket
server will go ahead and accept the client for that subprotocol.
(closes issue ASTERISK-21857)
Review: https://reviewboard.asterisk.org/r/2621/
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@393528 65c4cc65-6c06-0410-ace0-fbb531ad65f3
I ended up using a bridge blob, so this structure was
unused. Keeping it in the header would just cause confusion.
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@393463 65c4cc65-6c06-0410-ace0-fbb531ad65f3
If no matching endpoint is found for the incoming request Asterisk will respond
with a 401 Unauthorized (rejecting the request), but will first challenge if
no authorization creditials are given.
Changes also included moving ACL options into a new global 'security'
configuration section in res_sip.conf.
(closes issue ASTERISK-21433)
Reported by: Matt Jordan
Review: https://reviewboard.asterisk.org/r/2554/
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@393442 65c4cc65-6c06-0410-ace0-fbb531ad65f3
This adds several unit tests for CEL functionality and provides the
requisite framework for creating additional unit tests.
This also cleans up some reference leaks that were occurring in
Stasis-Core message callback code.
Review: https://reviewboard.asterisk.org/r/2646/
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@393410 65c4cc65-6c06-0410-ace0-fbb531ad65f3
Added the ability to send unsolicited NOTIFY requests to a particular endpoint
with a configured payload. Added both CLI and AMI support. For a given
endpoint, this module will iterate over all its contacts sending the appropriate
NOTIFY request to each.
(closes issue ASTERISK-21436)
Reported by: Matt Jordan
Review: https://reviewboard.asterisk.org/r/2623/
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@393364 65c4cc65-6c06-0410-ace0-fbb531ad65f3
The originate APIs allow callers to provide a pointer to a channel that will
point to the originated channel if the function call succeeds. This is used by AMI
to provide channel information when the originate is performed synchronously.
Unfortunately, if the originate fails in certain ways, the outbound channel is
already disposed of during the dialing itself. This results in the channel being
improperly dereferenced by the internal originate function in pbx.c.
This patch ref bumps the channel to prevent this from occurring. Callers must now
unlock and unref the channel (which is more in line with general channel management
guidelines anyway).
This only affects manager, as it is the only consumer of this API function that
actually passes in a channel pointer.
Review: https://reviewboard.asterisk.org/r/2617/
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@393361 65c4cc65-6c06-0410-ace0-fbb531ad65f3
In addition to porting those features, they now enjoy greater feature parity
with one another. Specifically, AutoMixMon now has a start and stop
message that can be specified with TOUCH_MIXMONITOR_MESSAGE_START and
TOUCH_MIXMONITOR_MESSAGE_STOP.
(closes issue ASTERISK-21553)
Reported by: Matt Jordan
Review: https://reviewboard.asterisk.org/r/2620/
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@393309 65c4cc65-6c06-0410-ace0-fbb531ad65f3
Things may no longer behave in an unexpected fashion. Local channel
optimization to holding bridges will work again.
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@393184 65c4cc65-6c06-0410-ace0-fbb531ad65f3
Parking typically occurs when a channel is transferred to a parking extension.
When this occurs, the channel never actually hits the dialplan if the extension
it was transferred to was a "parking extension", that is, the extension in
the first priority calls the Park application. Instead, the channel is
immediately sent into the holding bridge acting as the parking bridge.
This is problematic.
Because we never go out to the dialplan, the CDRs won't transition properly
and the application field will not be set to "Park". CDRs typically swallow
holding bridges, so the CDR itself won't even be generated.
This patch handles this by pulling out the holding bridge handling into its
own CDR state. CDRs now have an explicit parking state that accounts for this
specific subclass of the holding bridge. In addition, we handle the parking
stasis message to set application specific data on the CDR such that the
last known application for the CDR properly reflects "Park".
This is a bit sad since we're working around the odd internal implementation
of parking that exists in Asterisk (and that we had to maintain in order to
continue to meet some odd use cases of parking), but at least the code to
handle that is where it belongs: in CDRs as opposed to sprinkled liberally
throughout the codebase.
This patch also properly clears the OUTBOUND channel flag from a channel when
it leaves a bridge, and tweaks up dialing handling to properly compare the
correct CDR with the channel calling/being dialed.
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@393130 65c4cc65-6c06-0410-ace0-fbb531ad65f3
Add config framework OPT_CHAR_ARRAY_T and OPT_STRINGFIELD_T non-empty
requirement option. There are cases were you don't want a config option
string to be empty. To require the option string to be non-empty, just
set the aco_option_register() flags parameter to non-zero.
* Updated some config framework enum aco_option_type comments.
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@393034 65c4cc65-6c06-0410-ace0-fbb531ad65f3
There was a misunderstanding about ast_bridge_impart()'s handling of the
imparted channel's reference. The channel reference is passed by the
caller unless ast_bridge_impart() returns an error.
* Fixed a memory leak in conf_announce_channel_push() if the impart
failed.
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@392934 65c4cc65-6c06-0410-ace0-fbb531ad65f3
This change removes AST_CEL_BRIDGE_UPDATE since it should no longer be
used because masquerade situations are now accounted for in other ways.
This also refactors usage of AST_CEL_FORWARD to be produced by a Dial
message which has been extended with a "forward" field.
(closes issue ASTERISK-21566)
Review: https://reviewboard.asterisk.org/r/2635/
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@392829 65c4cc65-6c06-0410-ace0-fbb531ad65f3
This adds support for stasis/sounds and stasis/sounds/{ID} queries via
the Asterisk RESTful Interface (ARI, formerly Stasis-HTTP).
The following changes have been made to accomplish this:
* A modular indexer was created for local media.
* A new function to get an ast_format associated with a file extension
was added.
* Modifications were made to the built-in HTTP server so that URI
decoding could be deferred to the URI handler when necessary.
* The Stasis-HTTP sounds JSON documentation was modified to handle
cases where multiple languages are installed in different formats.
* Register and Unregister events for formats were added to the system
topic.
(closes issue ASTERISK-21584)
(closes issue ASTERISK-21585)
Review: https://reviewboard.asterisk.org/r/2507/
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@392700 65c4cc65-6c06-0410-ace0-fbb531ad65f3
Sorcery specific object information is now opaque and allocated with the object.
This means that modules do not need to be recompiled if the sorcery specific part
is changed. It also means that sorcery can store additional information on objects
and ensure it is freed or the reference count decreased when the object goes away.
To facilitate the above a generic sorcery allocator function has been added which
also ensures that allocated objects do not have a lock.
Extended fields have been added thanks to all of the above which allows specific fields
to be marked as extended, and thus simply stored as-is within the object. Type safety
is *NOT* enforced on these fields. A consumer of them has to query and ultimately perform
their own safety check. What does this mean? Extra modules can extend already defined
structures without having to modify them.
Tests have also been included to verify extended field functionality.
Review: https://reviewboard.asterisk.org/r/2585/
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@392586 65c4cc65-6c06-0410-ace0-fbb531ad65f3
1. Security events
2. Websocket support
3. Diversion header + redirecting support
4. An anonymous endpoint identifier
5. Inbound extension state subscription support
6. PIDF notify generation
7. One touch recording support (special thanks Sean Bright!)
8. Blind and attended transfer support
9. Automatic inbound registration expiration
10. SRTP support
11. Media offer control dialplan function
12. Connected line support
13. SendText() support
14. Qualify support
15. Inband DTMF detection
16. Call and pickup groups
17. Messaging support
Thanks everyone!
Side note: I'm reminded of the song "How Far We've Come" by Matchbox Twenty.
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@392565 65c4cc65-6c06-0410-ace0-fbb531ad65f3
* Extract a useful routine from the softmix bridge technology for other
technologies. Make other technologies use it if they can.
* Made native and 1-1 bridges write to all parties if the bridge channel
writing the frame into the bridge is NULL. Softmix will also do the same
for frame types that make sense.
* Tweak the bridge write routine return value meaning and adjust the
bridge technologies to match.
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@392514 65c4cc65-6c06-0410-ace0-fbb531ad65f3
The bridge frame queue functions need to return an error status if the
frame failed to be queued because of an error condition. The main calls
that needed to return the status are:
ast_bridge_channel_queue_action_data() and
ast_bridge_channel_write_action_data(). The other return changes are
ripple effects.
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@392435 65c4cc65-6c06-0410-ace0-fbb531ad65f3
Matthew Jordan
David M. Lee
Jonathan Rose
Mark Michelson
Kinsey Moore
Joshua Colp
Richard Mudgett
Jason Parker
Kevin Harwell