3649 Commits (a7e747918d415a7cc4616d1b69550a3225f0a0f6)

Author	SHA1	Message	Date
zuul	e7fc209b26	Merge "codecs: Add iLBC 20." into 14	9 years ago
Joshua Colp	804c3e6b9e	Merge "res_srtp: Enable AES-256 and AES-GCM." into 14	9 years ago
zuul	5356e307dc	Merge "res_pjsip: Whitespace and comment cleanup." into 14	9 years ago
zuul	0b4ceaead6	Merge "res_fax.c: Fix deadlock potential in FAXOPT(faxdetect) framehook." into 14	9 years ago
Joshua Colp	4a24c028be	Merge "res_fax: Fix FAXOPT(faxdetect) timeout option." into 14	9 years ago
Joshua Colp	e551636144	Merge "res_pjsip: Add fax_detect_timeout endpoint option." into 14	9 years ago
Alexander Traud	c82f24f36a	codecs: Add iLBC 20. ... Asterisk already supported iLBC 30. This change adds iLBC 20. Now, Asterisk defaults to iLBC 20 but falls back to iLBC 30, when the remote party requests this. ASTERISK-26218 #close ASTERISK-26221 #close Reported by: Aaron Meriwether Change-Id: I07f523a3aa1338bb5217a1bf69c1eeb92adedffa	9 years ago
Richard Mudgett	6e2e3915c8	res_pjsip: Whitespace and comment cleanup. ... Change-Id: I11139a4a95df34e223ba622aa6227e33ab8f6c38	9 years ago
Richard Mudgett	964ae54ecf	res_fax.c: Fix deadlock potential in FAXOPT(faxdetect) framehook. ... The fax_detect_framehook() has the potential to deadlock if an incoming fax happens during the Playback or similar application. * Fixed the potential deadlock by not calling ast_async_goto() with the channel lock held. * Made always eat the fax detection frame whether there is a fax extension or not. * Made only detach the framehook if we detected a fax and not on other possible frames. ASTERISK-26216 Reported by: Richard Mudgett Change-Id: I99da35c26d1cd802626ffb4c1b4eb5b015581b6d	9 years ago
Richard Mudgett	c3462adeb8	res_fax: Fix FAXOPT(faxdetect) timeout option. ... The fax detection timeout option did not work because basically the wrong variable was checked in fax_detect_framehook(). As a result, the timer would timeout immediately and disable fax detection. * Fixed ignoring negative timeout values. We'd complain and then go right on using the negative value. * Fixed destroy_faxdetect() in the off-nominal case of an incomplete object creation. * Added more range checking to FAXOPT(gateway) timeout parameter. ASTERISK-26214 #close Reported by: Richard Mudgett Change-Id: Idc5e698dfe33572de9840bc68cd9fc043cbad976	9 years ago
Richard Mudgett	d11731ac2f	res_pjsip: Add fax_detect_timeout endpoint option. ... The new endpoint option allows the PJSIP channel driver's fax_detect endpoint option to timeout on a call after the specified number of seconds into a call. The new feature is disabled if the timeout is set to zero. The option is disabled by default. ASTERISK-26214 Reported by: Richard Mudgett Change-Id: Id5a87375fb2c4f9dc1d4b44c78ec8735ba65453d	9 years ago
Alexei Gradinari	56b4112659	res_pjsip_pubsub: fixed a bug when pjsip_tx_data_dec_ref is called twice. ... This patch removed call of pjsip_tx_data_dec_ref in send_notify if send_request failed. The pjsip_dlg_send_request deletes the message on error by itself. It seems this patch fixes next issues: ASTERISK-26199 ASTERISK-26166 ASTERISK-26174 Change-Id: I8b05917c93d993f95d604c042ace5f1a5500f59a	9 years ago
Alexander Traud	2103ad1fec	res_srtp: Enable AES-256 and AES-GCM. ... ASTERISK-26190 #close Change-Id: I11326d80edd656524a51a19450e586c583aa0a0b	9 years ago
Corey Farrell	0c88fb460f	pbx: Create pbx_sw.c for management of 'struct ast_sw'. ... This changes context switches from a linked list to a vector, makes 'struct ast_sw' opaque to pbx.c. Although ast_walk_context_switches is maintained the procedure is no longer efficient except for the first call (inc==NULL). This functionality is replaced by two new functions implemented by vector macros. * ast_context_switches_count (AST_VECTOR_SIZE) * ast_context_switches_get (AST_VECTOR_GET) As with ast_walk_context_switches callers of these functions are expected to have locked contexts. Only a few places in Asterisk walked the switches, they have been converted to use the new functions. Change-Id: I08deb016df22eee8288eb03de62593e45a1f0998	9 years ago
zuul	7ff9bed7b0	Merge "Unit tests: Use AST_TEST_DEFINE in conditional code only."	9 years ago
zuul	b1c45dc815	Merge "pbx: Create pbx_ignorepat.c for management of 'struct ast_ignorepat'."	9 years ago
zuul	e51b40bd87	Merge "res_rtp_asterisk: Count a roll-over of the sequence number even on lost packets."	9 years ago
Corey Farrell	cf1188a1be	Unit tests: Use AST_TEST_DEFINE in conditional code only. ... If AST_TEST_DEFINE is not conditional to TEST_FRAMEWORK it produces dead code. This places all existing unit tests into a conditional block if they weren't already. ASTERISK-26211 #close Change-Id: I8ef83ee11cbc991b07b7a37ecb41433e8c734686	9 years ago
Alexei Gradinari	e9daa34261	res_pjsip_mwi: remove unneeded check on endpoint's contacts. ... The function create_mwi_subscriptions_for_endpoint checks if there is active contacts by retrieving aors and contacts. This function is used to create all unsolicited mwi subscriptions on startup and is used when contact added. In both cases it's not necessary to check if there are contacts. The contacts are needed when asterisk sends mwi. ASTERISK-26200 #close Change-Id: I98e43bdc97f3c0829951cd9bf5f3c6348c6ac1fa	9 years ago
Alexander Traud	cb5e3445be	res_rtp_asterisk: Count a roll-over of the sequence number even on lost packets. ... With this change, the initial RTP sequence number is randomly chosen not between 0 and 65535 (0xffff) but 0 and 32767 (0x7fff). This assures, the roll-over counter (ROC) synchronization is not lost for sRTP, when the very first RTP packets get lost; see http://srtp.sourceforge.net/faq.html#Q6 ASTERISK-26207 #close Change-Id: I9a527e3aa3ce8f3becc5131d7ba32b57b5845464	9 years ago
Corey Farrell	e2e8713b84	pbx: Create pbx_ignorepat.c for management of 'struct ast_ignorepat'. ... This changes context ignore patterns from a linked list to a vector, makes 'struct ast_ignorepat' opaque to pbx.c. Although ast_walk_context_ignorepats is maintained the procedure is no longer efficient except for the first call (inc==NULL). This functionality is replaced by two new functions implemented by vector macros. * ast_context_ignorepats_count (AST_VECTOR_SIZE) * ast_context_ignorepats_get (AST_VECTOR_GET) As with ast_walk_context_ignorepats callers of these functions are expected to have locked contexts. Only a few places in Asterisk walked the ignorepats, they have been converted to use the new functions. Change-Id: I78f2157d275ef1b7d624b4ff7d770d38e5d7f20a	9 years ago
Corey Farrell	be36bd7ca5	pbx: Create pbx_include.c for management of 'struct ast_include'. ... This changes context includes from a linked list to a vector, makes 'struct ast_include' opaque to pbx.c. Although ast_walk_context_includes is maintained the procedure is no longer efficient except for the first call (inc==NULL). This functionality is replaced by two new functions implemented by vector macros. * ast_context_includes_count (AST_VECTOR_SIZE) * ast_context_includes_get (AST_VECTOR_GET) As with ast_walk_context_includes callers of these functions are expected to have locked contexts. Only a few places in Asterisk walked the includes, they have been converted to use the new functions. const have been applied where possible to parameters for ast_include functions. Change-Id: Ib5c882e27cf96fb2aec67a39c18b4c71c9c83b60	9 years ago
Mark Michelson	273052f404	Update support for SILK format. ... This commit adds scaffolding in order to support the SILK audio format on calls. Roughly, this is what is added: * Cached silk formats. One for each possible sample rate. * ast_codec structures for each possible sample rate. * RTP payload mappings for "SILK". In addition, this change overhauls the res_format_attr_silk file in the following ways: * The "samplerate" attribute is scrapped. That's native to the format. * There are far more checks to ensure that attributes have been allocated before attempting to reference them. * We do not SDP fmtp lines for attributes set to 0. These changes make way to be able to install a codec_silk module and have it actually work. It also should allow for passthrough silk calls in Asterisk. Change-Id: Ieeb39c95a9fecc9246bcfd3c45a6c9b51c59380e	9 years ago
Joshua Colp	89f0a7d3f4	Merge "res_rtp_asterisk: Enable Forward Secrecy (PFS) for DTLS."	9 years ago
zuul	153875be24	Merge "pjsip_options.c: Fix container operation."	9 years ago
zuul	43596895f9	Merge "pjsip_configuration.c: Misc cleanups."	9 years ago
zuul	2567e57624	Merge "res/res_corosync: Raise a Stasis message on node join/leave events"	9 years ago
zuul	3849f23bff	Merge "res/res_pjsip_session: Check for presence of an active negotiator"	9 years ago
Richard Mudgett	bc1ff41be7	pjsip_options.c: Fix container operation. ... aor_observer_deleted() needs to operate on all contacts found for the deleted AOR instead of only the first one found. This is really only a problem if there is more than one contact for the AOR. Change-Id: Id24ac0d5e8c931330231fb45dd2a331a84339dc1	9 years ago
Richard Mudgett	eabcfeeaa3	pjsip_configuration.c: Misc cleanups. ... * Fix some whitespace in various routines. * Rename i to iter in persistent_endpoint_update_state(). * Fix off-nominal copy/paste message wording in persistent_endpoint_contact_deleted_observer() Change-Id: Id8e34f5d09e7eebac3af22501c44c1110a3e29d8	9 years ago
Alexander Traud	85212f2799	res_rtp_asterisk: Enable Forward Secrecy (PFS) for DTLS. ... Since July 2014, TLS based protocols (SIP over TLS, Secure WebSockets, HTTPS) support PFS thanks to ASTERISK-23905. In July 2015, the same feature was added for DTLS. The source code from main/tcptls.c should have been re-used to ease security audits. Therefore, this change rolls back the change from July 2015 and re-uses the code from July 2014. This has the additional benefits to work under CentOS 7 and enabling not just ECDHE but DHE based cipher suites as well. ASTERISK-25659 #close Reported by: StefanEng86, urbaniak, pay123 Tested by: sarumjanuch, traud patches: res_rtp_asterisk.patch submitted by sarumjanuch dtls_centos_step_1.patch submitted by traud dtls_centos_step_2.patch submitted by traud Change-Id: I537cadf4421f092a613146b230f2c0ee1be28d5c	9 years ago
Matt Jordan	0d487b53b1	res/res_pjsip_session: Check for presence of an active negotiator ... It is possible in a hypothetical situation for a session refresh to be invoked on a PJSIP when the negotiatior on the INVITE session has not yet been established. While this shouldn't occur with existing uses of ast_sip_session_refresh, the crashes that occur due to improperly calling PJSIP functions that expect a non-NULL negotiatior are avoidable. PJSIP will create the negotiator in pjsip_inv_reinvite; this means that simply checking for the presence of the negotiator before passing it to other PJSIP functions that use it is allowable. As such, this patch adds checks for the presence of the negotiator before calling PJSIP functions that assume it is non-NULL. Change-Id: I1028323e7e01b0a531865e5412a71b6f6ec4276d	9 years ago
Matt Jordan	c49833653b	res/res_pjsip_pubsub: Add additional debug statements ... When something very sad and wrong occurs, it's challenging sometimes to figure out why. This patch adds some additional debug statements on off-nominal paths to try and make debugging easier. Change-Id: I7bffb73cc733b6f80193a23340881db4a102b640	9 years ago
Matt Jordan	f12311ee69	res/res_corosync: Raise a Stasis message on node join/leave events ... When res_corosync detects that a node leaves or joins, it currently is informed of this via Corosync callbacks. However, there are a few limitations with the information presented: (1) While we have information that Corosync is aware of - such as the Corosync nodeid - that information is really only useful inside of Corosync or res_corosync. There's no way to translate a Corosync nodeid to some other internally useful unique identifier for the Asterisk instance that just joined or left the cluster. (2) While res_corosync is notified of the instance joining or leaving the cluster, it has no mechanism to inform the Asterisk core or other modules of this event. This limits the usefulness of res_corosync as a heartbeat mechanism for other modules. This patch addresses both issues. First, it adds the notion of a cluster discovery message both within the Stasis message bus, as well as the binary event messages that res_corosync uses to transmit data back and forth within the cluster. When Asterisk joins the cluster, it sends a discovery message to the other nodes in the cluster, which correlates the Corosync nodeid along with the Asterisk EID. res_corosync now maintains a hash of Corosync nodeids to Asterisk EIDs, such that it can map changes in cluster state with the Asterisk instance that has that nodeid. Likewise, when an Asterisk instance receives a discovery message from a node in the cluster, it now sends its own discovery message back to the originating node with the local Asterisk EID. This lets Asterisk instances within the cluster build a complete picture of the other Asterisk instances within the cluster. Second, it publishes the discovery messages onto the Stasis message bus. Said messages are published whenever a node joins or leaves the cluster. Interested modules can subscribe for the ast_cluster_discovery_type() message under the ast_system_topic() and be notified when changes in cluster state occur. Change-Id: I9015f418d6ae7f47e4994e04e18948df4d49b465	9 years ago
zuul	73d8cb587d	Merge "rest_api/channels: Fix multiple issues with create and dial"	9 years ago
Joshua Colp	e049248161	Merge "res_pjsip: Fix statsd regression."	9 years ago
Joshua Colp	69796bf5fe	Merge "res_sorcery_realtime: fix bug when successful UPDATE is treated as failed"	9 years ago
Joshua Colp	90d4ebbb40	Merge "res_pjsip: Added "subscribe_context" to endpoint"	9 years ago
George Joseph	886f2cab23	rest_api/channels: Fix multiple issues with create and dial ... * We weren't properly subscribing to the channel and it's originator on create. * We weren't doing a publish_dial after calling ast_call on dial. * We weren't calling depart_bridge when a channel left the dial bridge. The first 2 issues were causing events to not be generated and the third was actually causing channels to not get properly destroyed when hung up. Together these 3 issues were causing the new rest_apichannels/create_dial_bridge tests to fail. As a result of the fixes, the cdr state machine had to be slightly tweaked to allow bridge leave events without asserting and the tests themselves had to be updated to account for the channels now cleaning themselves up. Change-Id: Ibf23abf5a62de76e82afb4461af5099c961b97d8	9 years ago
Richard Mudgett	b85446d039	res_pjsip: Fix statsd regression. ... The ASTERISK-25904 change-id I8fad8aae9305481469c38d2146e1ba3a56d3108f patch introduced several regressions when the newly created "Updated" state goes out for each endpoint registration refresh. 1) It restarted any OPTIONS RTT ping cycle. 2) It would interfere with a currently active ping and throw off that ping's resulting RTT calculation. 3) It cleared the RTT time each time the endpoint was refreshed. 4) The cleared RTT time was sent out as a statsd update each time. 5) It created two AMI events for each update. * Revert the original patch and reimplement it. Now the current contact status state is re-sent instead of the state being momentarily toggled every time the endpoint refreshes its registration. The statsd events are not created for the re-sent refresh because they are sent after every OPTIONS ping. ASTERISK-26160 #close Reported by: Matt Jordan Change-Id: Ie072be790fbb2a8f5c1c874266e4143fa31f66d1	9 years ago
Joshua Colp	4ad333bb0e	func_odbc: Fix connection deadlock. ... The func_odbc module was modified to ensure that the previous behavior of using a single database connection was maintained. This was done by getting a single database connection and holding on to it. With the new multiple connection support in res_odbc this will actually starve every other thread from getting access to the database as it also maintains the previous behavior of having only a single database connection. This change disables the func_odbc specific behavior if the res_odbc module is running with only a single database connection active. The connection is only kept for the duration of the request. ASTERISK-26177 #close Change-Id: I9bdbd8a300fb3233877735ad3fd07bce38115b7f	9 years ago
Joshua Colp	e0f27ecabb	Merge "chan_sip/res_pjsip_t38: Handle a request to negotiate T.38 after it is enabled."	9 years ago
Alexei Gradinari	c832f100d9	res_sorcery_realtime: fix bug when successful UPDATE is treated as failed ... If the SQL UPDATE statement changes nothing then SQLRowCount returns 0. This value should be treated as success. But the function sorcery_realtime_update treats it as failed. This bug was found using stress tests on PJSIP. If there are 2 consecutive SIP REGISTER requests with the same contact data during 1 second then res_pjsip_registrar adds contact location on 1st request and tries to update contact location on 2nd. The update fails and res_pjsip_registrar even removes correct contact location. The test "object_update_uncreated" was removed from test_sorcery_realtime.c because it's now a valid situation. This patch also adds missing debug of extra SQL parameter. ASTERISK-26172 #close Change-Id: I05a7f3051455336c9dda29efc229decf86071303	9 years ago
Joshua Colp	302be4809a	chan_sip/res_pjsip_t38: Handle a request to negotiate T.38 after it is enabled. ... Some T.38 implementations may send another re-invite after the initial one which adds additional negotiation details (such as the max bitrate). Currently this will fail when passthrough is being done in chan_sip as we do nothing if T.38 is already active. Other handlers of T.38 inside of Asterisk (such as res_fax) handle this scenario so this change adds support for it to chan_sip and res_pjsip_t38. If a request to negotiate is received while T.38 is already enabled a new re-INVITE is sent and negotiation is done again. ASTERISK-26179 #close Change-Id: I0298494d3da6df3219bbfa4be9aa04015043145c	9 years ago
Scott Griepentrog	fb96492ec4	PJSIP: provide valid tcp nodelay option for reuse ... When using TCP transport with chan_pjsip, the TCP_NODELAY option value was allocated on the stack, then passed as a pointer to the tcp transport configuration structure, and later re-used on subsequently created sockets when it was no longer valid. This patch changes the allocation to be a static. ASTERISK-26180 #close Reported by: Scott Griepentrog Change-Id: I3251164c7f710dbdab031282f00e30a9770626a0	9 years ago
Alexei Gradinari	1c949eea6c	res_pjsip: Added "subscribe_context" to endpoint ... If specified, incoming SUBSCRIBE requests will be searched for the matching extension in the indicated context. If no "subscribe_context" is specified, then the "context" setting is used. ASTERISK-25471 #close Change-Id: I3fb7a15f5bc154079bd348c08b7ad1cdd2d5e514	9 years ago
Joshua Colp	9e10aa8496	Merge "res_pjsip_session.c: Don't send extra BYE if SDP invalid."	9 years ago
Joshua Colp	764a009fbe	Merge "res_pjsip_session.c: End call on initial invalid SDP negotiation."	9 years ago
Joshua Colp	01a8d9844b	Merge "res_pjsip.c: Register PJMEDIA error code decoder."	9 years ago
Joshua Colp	4ad22164fe	Merge "res_pjsip_session.c: Remove unused parameter from handle_incoming()."	9 years ago