A condition was added in a commit to fix ASTERISK-21374, that, if the
SIP_PAGE3_NAT_AUTO_RPORT flag was set, to then copy a peer's SIP_NAT_FORCE_RPORT
flag to the dialog. This condition should not have been there since it assumed
that if Asterisk is in an environment where NAT is involved, that the auto_* nat
settings or force_rport setting would be on in the global settings. If the nat
setting in the global setting is set to 'nat=no' and then turned on for peers
(which is not quite the recommended way, although it is allowed) this flag is
never copied to the dialog resulting in problems like, REGISTER replies going
to the wrong port.
This patch removes this conditional check and will now always use the peer's
flag which by this point in the code the checks on whether the peer is behind
NAT or not (if using auto_force_rport) have already been run.
(closes issue ASTERISK-22236)
Reported by: Filip Frank
Tested by: Michael L. Young
Patches:
asterisk-2236-always-set-rport.diff uploaded
by Michael L. Young (license 5026)
Review: https://reviewboard.asterisk.org/r/2919/
........
Merged revisions 401167 from http://svn.asterisk.org/svn/asterisk/branches/11
........
Merged revisions 401168 from http://svn.asterisk.org/svn/asterisk/branches/12
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@401169 65c4cc65-6c06-0410-ace0-fbb531ad65f3
When a 200 OK for an initial INVITE is received, we were doing
the right thing by ACKing and sending an immediate BYE. However,
we also were doing the wrong thing and queuing an answer frame,
thus causing the call to be answered. This would cause the call
to be hung up by the channel thread, thus resulting in a second
BYE being sent out.
In this fix, I also have set the hangupcause to be correct since
the initial BYE being sent by Asterisk had an unknown hangup
cause. I have changed to using "Bearer capabilty not available"
since the call was hung up due to an SDP offer/answer error.
(closes issue ASTERISK-22621)
reported by Kinsey Moore
........
Merged revisions 400970 from http://svn.asterisk.org/svn/asterisk/branches/1.8
........
Merged revisions 400971 from http://svn.asterisk.org/svn/asterisk/branches/11
........
Merged revisions 400984 from http://svn.asterisk.org/svn/asterisk/branches/12
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@400998 65c4cc65-6c06-0410-ace0-fbb531ad65f3
Channel snapshots have string representations of the channel's native formats.
Prior to this change, the format strings were re-created on ever channel snapshot
creation. Since channel native formats rarely change, this was very wasteful.
Now, string representations of formats may optionally be stored on the ast_format_cap
for cases where string representations may be requested frequently. When formats
are altered, the string cache is marked as invalid. When strings are requested, the
cache validity is checked. If the cache is valid, then the cached strings are copied.
If the cache is invalid, then the string cache is rebuilt and copied, and the cache
is marked as being valid again.
Review: https://reviewboard.asterisk.org/r/2879
........
Merged revisions 400356 from http://svn.asterisk.org/svn/asterisk/branches/12
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@400363 65c4cc65-6c06-0410-ace0-fbb531ad65f3
........
r399887 | dlee | 2013-09-26 10:41:47 -0500 (Thu, 26 Sep 2013) | 1 line
Minor performance bump by not allocate manager variable struct if we don't need it
........
r400138 | dlee | 2013-09-30 10:24:00 -0500 (Mon, 30 Sep 2013) | 23 lines
Stasis performance improvements
This patch addresses several performance problems that were found in
the initial performance testing of Asterisk 12.
The Stasis dispatch object was allocated as an AO2 object, even though
it has a very confined lifecycle. This was replaced with a straight
ast_malloc().
The Stasis message router was spending an inordinate amount of time
searching hash tables. In this case, most of our routers had 6 or
fewer routes in them to begin with. This was replaced with an array
that's searched linearly for the route.
We more heavily rely on AO2 objects in Asterisk 12, and the memset()
in ao2_ref() actually became noticeable on the profile. This was
#ifdef'ed to only run when AO2_DEBUG was enabled.
After being misled by an erroneous comment in taskprocessor.c during
profiling, the wrong comment was removed.
Review: https://reviewboard.asterisk.org/r/2873/
........
r400178 | dlee | 2013-09-30 13:26:27 -0500 (Mon, 30 Sep 2013) | 24 lines
Taskprocessor optimization; switch Stasis to use taskprocessors
This patch optimizes taskprocessor to use a semaphore for signaling,
which the OS can do a better job at managing contention and waiting
that we can with a mutex and condition.
The taskprocessor execution was also slightly optimized to reduce the
number of locks taken.
The only observable difference in the taskprocessor implementation is
that when the final reference to the taskprocessor goes away, it will
execute all tasks to completion instead of discarding the unexecuted
tasks.
For systems where unnamed semaphores are not supported, a really
simple semaphore implementation is provided. (Which gives identical
performance as the original taskprocessor implementation).
The way we ended up implementing Stasis caused the threadpool to be a
burden instead of a boost to performance. This was switched to just
use taskprocessors directly for subscriptions.
Review: https://reviewboard.asterisk.org/r/2881/
........
r400180 | dlee | 2013-09-30 13:39:34 -0500 (Mon, 30 Sep 2013) | 28 lines
Optimize how Stasis forwards are dispatched
This patch optimizes how forwards are dispatched in Stasis.
Originally, forwards were dispatched as subscriptions that are invoked
on the publishing thread. This did not account for the vast number of
forwards we would end up having in the system, and the amount of work it
would take to walk though the forward subscriptions.
This patch modifies Stasis so that rather than walking the tree of
forwards on every dispatch, when forwards and subscriptions are changed,
the subscriber list for every topic in the tree is changed.
This has a couple of benefits. First, this reduces the workload of
dispatching messages. It also reduces contention when dispatching to
different topics that happen to forward to the same aggregation topic
(as happens with all of the channel, bridge and endpoint topics).
Since forwards are no longer subscriptions, the bulk of this patch is
simply changing stasis_subscription objects to stasis_forward objects
(which, admittedly, I should have done in the first place.)
Since this required me to yet again put in a growing array, I finally
abstracted that out into a set of ast_vector macros in
asterisk/vector.h.
Review: https://reviewboard.asterisk.org/r/2883/
........
r400181 | dlee | 2013-09-30 13:48:57 -0500 (Mon, 30 Sep 2013) | 28 lines
Remove dispatch object allocation from Stasis publishing
While looking for areas for performance improvement, I realized that an
unused feature in Stasis was negatively impacting performance.
When a message is sent to a subscriber, a dispatch object is allocated
for the dispatch, containing the topic the message was published to, the
subscriber the message is being sent to, and the message itself.
The topic is actually unused by any subscriber in Asterisk today. And
the subscriber is associated with the taskprocessor the message is being
dispatched to.
First, this patch removes the unused topic parameter from Stasis
subscription callbacks.
Second, this patch introduces the concept of taskprocessor local data,
data that may be set on a taskprocessor and provided along with the data
pointer when a task is pushed using the ast_taskprocessor_push_local()
call. This allows the task to have both data specific to that
taskprocessor, in addition to data specific to that invocation.
With those two changes, the dispatch object can be removed completely,
and the message is simply refcounted and sent directly to the
taskprocessor.
Review: https://reviewboard.asterisk.org/r/2884/
........
Merged revisions 399887,400138,400178,400180-400181 from http://svn.asterisk.org/svn/asterisk/branches/12
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@400186 65c4cc65-6c06-0410-ace0-fbb531ad65f3
When Asterisk receives a 200 OK in response to an invite, that peer should have
sent an SDP at some point by then. If the channel has never received an SDP,
media won't have been set and the remote address won't be known. Endpoints in
general should not be doing this. This patch makes it so that Asterisk will
simply hang up a call if it sends a 200 OK at this point. So far this odd
behavior for endpoints has only been observed in tests which involved manually
created SIP transactions in SIPp.
(closes issue ASTERISK-22424)
Reported by: Jonathan Rose
Review: https://reviewboard.asterisk.org/r/2827/
........
Merged revisions 399939 from http://svn.asterisk.org/svn/asterisk/branches/1.8
........
Merged revisions 399962 from http://svn.asterisk.org/svn/asterisk/branches/11
........
Merged revisions 399976 from http://svn.asterisk.org/svn/asterisk/branches/12
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@399978 65c4cc65-6c06-0410-ace0-fbb531ad65f3
1st Issue
When a realtime peer sends an un-REGISTER request, Asterisk
un-registers the peer but the database table record still has regseconds and
fullcontact for the peer. This results in calls attempting to be routed to the
peer which is no longer registered. The expected behavior is to get
busy/congested when attempting to call an un-registered peer through the
dialplan.
What was discovered is that we are clearing out the peer's registration in the
database in parse_register_contact() when calling expire_register() but then
upon returning from parse_register_contact(), update_peer() is run which stores
back in the database table regseconds and fullcontact.
2nd Issue
The reporter pointed out that the 200 ok being returned by Asterisk
after un-registering a peer contains a Contact header with ;expires= and the
Expires header is not set to 0. This is actually a regression.
Tests were created for this second issue (ASTERISK-22548). The tests have been
reviewed and a Ship It! was received on those tests.
This patch does the following:
* Do not ignore the Expires header value even when it is set to 0. The patch
sets the pvt->expiry earlier on in the function so that it is set properly and
used.
* If pvt->expiry is 0, do not call update_peer since that means the peer has
already been un-registered and there is no need to update the database record
again since nothing has changed.
(closes issue ASTERISK-22428)
Reported by: Ben Smithurst
Tested by: Ben Smithurst, Michael L. Young
Patches:
asterisk-22428-rt-peer-update-and-expires-header.diff
by Michael L. Young (license 5026)
Review: https://reviewboard.asterisk.org/r/2869/
........
Merged revisions 399794 from http://svn.asterisk.org/svn/asterisk/branches/1.8
........
Merged revisions 399795 from http://svn.asterisk.org/svn/asterisk/branches/11
........
Merged revisions 399796 from http://svn.asterisk.org/svn/asterisk/branches/12
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@399797 65c4cc65-6c06-0410-ace0-fbb531ad65f3
The Dial, Queue, and FollowMe applications need to inhibit the bridging
initial connected line exchange in order to support the 'I' option.
* Replaced the pass_reference flag on ast_bridge_join() with a flags
parameter to pass other flags defined by enum ast_bridge_join_flags.
* Replaced the independent flag on ast_bridge_impart() with a flags
parameter to pass other flags defined by enum ast_bridge_impart_flags.
* Since the Dial, Queue, and FollowMe applications are now the only
callers of ast_bridge_call() and ast_bridge_call_with_flags(), changed the
calling contract to require the initial COLP exchange to already have been
done by the caller.
* Made all callers of ast_bridge_impart() check the return value. It is
important. As a precaution, I also made the compiler complain now if it
is not checked.
* Did some cleanup in parking_tests.c as a result of checking the
ast_bridge_impart() return value.
An independent, but associated change is:
* Reduce stack usage in ast_indicate_data() and add a dropping redundant
connected line verbose message.
(closes issue ASTERISK-22072)
Reported by: Joshua Colp
Review: https://reviewboard.asterisk.org/r/2845/
........
Merged revisions 399136 from http://svn.asterisk.org/svn/asterisk/branches/12
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@399138 65c4cc65-6c06-0410-ace0-fbb531ad65f3
With the new work in Asterisk 12, there are some uses of the
optional_api that are prone to failure. The details are rather involved,
and captured on [the wiki][1].
This patch addresses the issue by removing almost all of the magic from
the optional API implementation. Instead of relying on weak symbol
resolution, a new optional_api.c module was added to Asterisk core.
For modules providing an optional API, the pointer to the implementation
function is registered with the core. For modules that use an optional
API, a pointer to a stub function, along with a optional_ref function
pointer are registered with the core. The optional_ref function pointers
is set to the implementation function when it's provided, or the stub
function when it's now.
Since the implementation no longer relies on magic, it is now supported
on all platforms. In the spirit of choice, an OPTIONAL_API flag was
added, so we can disable the optional_api if needed (maybe it's buggy on
some bizarre platform I haven't tested on)
The AST_OPTIONAL_API*() macros themselves remained unchanged, so
existing code could remain unchanged. But to help with debugging the
optional_api, the patch limits the #include of optional API's to just
the modules using the API. This also reduces resource waste maintaining
optional_ref pointers that aren't used.
Other changes made as a part of this patch:
* The stubs for http_websocket that wrap system calls set errno to
ENOSYS.
* res_http_websocket now properly increments module use count.
* In loader.c, the while() wrappers around dlclose() were removed. The
while(!dlclose()) is actually an anti-pattern, which can lead to
infinite loops if the module you're attempting to unload exports a
symbol that was directly linked to.
* The special handling of nonoptreq on systems without weak symbol
support was removed, since we no longer rely on weak symbols for
optional_api.
[1]: https://wiki.asterisk.org/wiki/x/wACUAQ
(closes issue ASTERISK-22296)
Reported by: Matt Jordan
Review: https://reviewboard.asterisk.org/r/2797/
........
Merged revisions 397989 from http://svn.asterisk.org/svn/asterisk/branches/12
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@397990 65c4cc65-6c06-0410-ace0-fbb531ad65f3
If the SIP channel driver processes an invalid SDP that defines media
descriptions before connection information, it may attempt to reference
the socket address information even though that information has not yet
been set. This will cause a crash.
This patch adds checks when handling the various media descriptions that
ensures the media descriptions are handled only if we have connection
information suitable for that media.
Thanks to Walter Doekes, OSSO B.V., for reporting, testing, and providing
the solution to this problem.
(closes issue ASTERISK-22007)
Reported by: wdoekes
Tested by: wdoekes
patches:
issueA22007_sdp_without_c_death.patch uploaded by wdoekes (License 5674)
........
Merged revisions 397756 from http://svn.asterisk.org/svn/asterisk/branches/1.8
........
Merged revisions 397757 from http://svn.asterisk.org/svn/asterisk/branches/10
........
Merged revisions 397758 from http://svn.asterisk.org/svn/asterisk/branches/11
........
Merged revisions 397759 from http://svn.asterisk.org/svn/asterisk/branches/12
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@397760 65c4cc65-6c06-0410-ace0-fbb531ad65f3
A remote exploitable crash vulnerability exists in the SIP channel driver if an
ACK with SDP is received after the channel has been terminated. The handling
code incorrectly assumed that the channel would always be present.
This patch adds a check such that the SDP will only be parsed and applied if
Asterisk has a channel present that is associated with the dialog.
Note that the patch being applied was modified only slightly from the patch
provided by Walter Doekes of OSSO B.V.
(closes issue ASTERISK-21064)
Reported by: Colin Cuthbertson
Tested by: wdoekes, Colin Cutherbertson
patches:
issueA21064_fix.patch uploaded by wdoekes (License 5674)
........
Merged revisions 397710 from http://svn.asterisk.org/svn/asterisk/branches/1.8
........
Merged revisions 397711 from http://svn.asterisk.org/svn/asterisk/branches/10
........
Merged revisions 397712 from http://svn.asterisk.org/svn/asterisk/branches/11
........
Merged revisions 397713 from http://svn.asterisk.org/svn/asterisk/branches/12
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@397753 65c4cc65-6c06-0410-ace0-fbb531ad65f3
This patch adds pass through support for Opus and VP8. That includes:
* Format attribute negotiation for Opus. Note that unlike some other codecs,
the draft RFC specifies having spaces delimiting the attributes in addition
to ';', so you have "attra=X; attrb=Y". This broke the attribute parsing in
chan_sip, so a small tweak was also included in this patch for that.
* A format attribute negotiation module for Opus, res_format_attr_opus
* Fast picture update for VP8. Since VP8 uses a different RTCP packet number
than FIR, this really is specific to VP8 at this time.
Note that the format attribute negotiation in res_pjsip_sdp_rtp was written
by mjordan. The rest of this patch was written completely by Lorenzo Miniero.
Review: https://reviewboard.asterisk.org/r/2723/
(closes issue ASTERISK-21981)
Reported by: Tzafrir Cohen
patches:
asterisk_opus+vp8_passthrough_20130718.patch uploaded by lminiero (License 6518)
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@397526 65c4cc65-6c06-0410-ace0-fbb531ad65f3
If a From header on an outbound out-of-call SIP MESSAGE were
malformed, the result could crash Asterisk.
In addition, if a From header on an incoming out-of-call SIP
MESSAGE request were malformed, the message was happily accepted
rather than being rejected up front. The incoming message path
would not result in a crash, but the behavior was bad nonetheless.
(closes issue ASTERISK-22185)
reported by Zhang Lei
........
Merged revisions 397254 from http://svn.asterisk.org/svn/asterisk/branches/11
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@397255 65c4cc65-6c06-0410-ace0-fbb531ad65f3
The SIP_CODEC family of variables let you set the preferred codec to be
offered on an outbound INVITE request. However, for video calls, you need to
be able to set both the audio and video codecs to be offered. This patch lets
the SIP_CODEC variables accept a comma delineated list of codecs. The first
codec in the list is set as the preferred codec; additional codecs are still
offered however.
This lets a dialplan writer set both audio and video codecs, e.g.,
Set(SIP_CODEC=ulaw,h264)
Note that this feature was written by both Dennis Guse and Frank Haase
Review: https://reviewboard.asterisk.org/r/2728
(closes issue ASTERISK-21976)
Reported by: Denis Guse
Tested by: mjordan, sysreq
patches:
patch-channels-chan__sip.c-393919 uploaded by dennis.guse (license 6513)
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@397243 65c4cc65-6c06-0410-ace0-fbb531ad65f3
In 1.8, r384779 introduced a regression by retrieving an old dialog and keeping
the old recv address since recv was already set. This has caused a problem when
a proxy is involved since responses to incoming requests from the proxy server,
after an outbound call is established, are never sent to the correct recv
address.
In 11, r382322 introduced this regression.
The fix is to revert that change and always store the recv address on incoming
requests.
Thank you Walter Doekes for helping to point out this error and Mark Michelson
for your input/review of the fix.
(closes issue ASTERISK-22071)
Reported by: Alex Zarubin
Tested by: Alex Zarubin, Karsten Wemheuer
Patches:
asterisk-22071-store-recvd-address.diff by Michael L. Young (license 5026)
........
Merged revisions 397204 from http://svn.asterisk.org/svn/asterisk/branches/1.8
........
Merged revisions 397205 from http://svn.asterisk.org/svn/asterisk/branches/11
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@397206 65c4cc65-6c06-0410-ace0-fbb531ad65f3
This removes unused code, event types, IE pltypes, and event IE types
where possible and makes several functions private that were once
public. This includes a renumbering of the remaining event and IE types
which breaks binary compatibility with previous versions. The last
remaining consumers of the old event system (or parts thereof) are
main/security_events.c, res/res_security_log.c, tests/test_cel.c,
tests/test_event.c, main/cel.c, and the CEL backends.
Review: https://reviewboard.asterisk.org/r/2703/
(closes issue ASTERISK-22139)
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@396887 65c4cc65-6c06-0410-ace0-fbb531ad65f3
This makes it so that we can detect failures to originate as with
earlier versions of Asterisk, which restores the Asterisk 11 behavior
for the originate manager action. This was causing the ACL tests for
SIP and IAX2 to fail since those tests expected originate failures
when ACLs would cause rejections. Also, this patch fixes crashes in
chan_sip when ACLs rejected peers during registration verification.
(closes issue ASTERISK-22212)
Reported by: Matt Jordan
Review: https://reviewboard.asterisk.org/r/2753/
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@396498 65c4cc65-6c06-0410-ace0-fbb531ad65f3
If a peer is used in a register line and TLS is defined as the transport, the
registration fails since the transport on the dialog is never set properly
resulting in UDP being used instead of TLS.
This patch sets the dialog's transport based on the transport that was defined
in the register line. If the register line does not specify a transport, the
parsing function for the register line always defaults back to UDP.
(closes issue ASTERISK-21964)
Reported by: Doug Bailey
Tested by: Doug Bailey
Patches:
asterisk-21964-set-reg-dialog-transport.diff
by Michael L. Young (license 5026)
........
Merged revisions 396240 from http://svn.asterisk.org/svn/asterisk/branches/1.8
........
Merged revisions 396248 from http://svn.asterisk.org/svn/asterisk/branches/11
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@396253 65c4cc65-6c06-0410-ace0-fbb531ad65f3
This commit is smaller than the initial review placed on review board. This is because
a change to allow for channel drivers to access parking functionality externally was
committed and invalidated quite a few of the changes initially made.
(closes issue ASTERISK-22039)
reported by Matt Jordan
Review: https://reviewboard.asterisk.org/r/2717
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@396103 65c4cc65-6c06-0410-ace0-fbb531ad65f3
This patch does the following:
* It moves the pickup code out of features.c and into pickup.c
* It removes the vast majority of dead code out of features.c. In particular,
this includes the parking code.
(issue ASTERISK-22134)
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@396060 65c4cc65-6c06-0410-ace0-fbb531ad65f3
This prevents XML documentation duplication by expanding channel and
bridge snapshot tags into channel and bridge snapshot parameter sets
with a given prefix or defaulting to no prefix. This also prevents
documentation from becoming fractured and out of date by keeping all
variations of the documentation in template form such that it only
needs to be updated once and keeps maintenance to a minimum.
Review: https://reviewboard.asterisk.org/r/2708/
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@395985 65c4cc65-6c06-0410-ace0-fbb531ad65f3
In working with res_stasis, I discovered a significant limitation to
the current structure of stasis_caching_topics: you cannot subscribe
to cache updates for a single channel/bridge/endpoint/etc.
To address this, this patch splits the cache away from the
stasis_caching_topic, making it a first class object. The stasis_cache
object is shared amongst individual stasis_caching_topics that are
created per channel/endpoint/etc. These are still forwarded to global
whatever_all_cached topics, so their use from most of the code does
not change.
In making these changes, I noticed that we frequently used a similar
pattern for bridges, endpoints and channels:
single_topic ----------------> all_topic
^
|
single_topic_cached ----+----> all_topic_cached
|
+----> cache
This pattern was extracted as the 'Stasis Caching Pattern', defined in
stasis_caching_pattern.h. This avoids a lot of duplicate code between
the different domain objects.
Since the cache is now disassociated from its upstream caching topics,
this also necessitated a change to how the 'guaranteed' flag worked
for retrieving from a cache. The code for handling the caching
guarantee was extracted into a 'stasis_topic_wait' function, which
works for any stasis_topic.
(closes issue ASTERISK-22002)
Review: https://reviewboard.asterisk.org/r/2672/
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@395954 65c4cc65-6c06-0410-ace0-fbb531ad65f3
This patch makes it so that all registration attempts that fail that
also permanently modify the registration state will raise an appropriate
AMI event.
Note that this patch was forward ported to trunk and the Stasis Core
message bus by mjordan.
(closes issue ASTERISK-21368)
Reported by: Dmitriy Serov
patches:
chan_sip.c.diff uploaded by Demon (license 6479)
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@395907 65c4cc65-6c06-0410-ace0-fbb531ad65f3
This patch renames the bridging* files to bridge*. This may seem pedantic
and silly, but it fits better in line with current Asterisk naming conventions:
* channel is not "channeling"
* monitor is not "monitoring"
etc.
A bridge is an object. It is a first class citizen in Asterisk. "Bridging" is
the act of using a bridge on a set of channels - and the API that fulfills that
role is more than just the action.
(closes issue ASTERISK-22130)
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@395378 65c4cc65-6c06-0410-ace0-fbb531ad65f3
This patch introduces DTLS-SRTP support to chan_pjsip and the options
necessary to configure it including an option to allow choosing between
32 and 80 byte SRTP tag lengths.
During the implementation and testing of this patch, three other bugs
were found and their fixes are included with this patch. The two in
chan_sip were a segfault relating to DTLS setup and mistaken call
rejection. The third bug fix prevents chan_pjsip from attempting to
perform bridge optimization between two endpoints if either of them is
running any form of SRTP.
Review: https://reviewboard.asterisk.org/r/2683/
(closes issue ASTERISK-21419)
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@395121 65c4cc65-6c06-0410-ace0-fbb531ad65f3
This adds CEL support for blind and attended transfers and call pickup.
During the course of adding this functionality I noticed that
CONF_ENTER, CONF_EXIT, and BRIDGE_TO_CONF events are particularly
useless without a bridge identifier, so I added that as well.
This adds tests for blind transfers, several types of attended
transfers, and call pickup.
The extra field in CEL records now consists of a JSON blob whose fields
are defined on a per-event basis.
Review: https://reviewboard.asterisk.org/r/2658/
(closes issue ASTERISK-21565)
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@394858 65c4cc65-6c06-0410-ace0-fbb531ad65f3
Temporary peers do not have an associated Stasis endpoint and quite a
bit of code in chan_sip assumes that all peers have a Stasis endpoint.
All endpoint accesses in chan_sip are now wrapped in an endpoint
NULL-check.
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@394795 65c4cc65-6c06-0410-ace0-fbb531ad65f3
Instead of formatting a NULL pointer into a "%s" format string (which is
usually not a good thing to do), we instead print "Unknown".
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@394278 65c4cc65-6c06-0410-ace0-fbb531ad65f3
This patch does the following:
* It merges Jaco Kroon's patch from ASTERISK-20754, which provides channel
information in the RTCP events. Because Stasis provides a cache, Jaco's
patch was modified to pass the channel uniqueid to the RTP layer as
opposed to a pointer to the channel. This has the following benefits:
(1) It keeps the RTP engine 'clean' of references back to channels
(2) It prevents circular dependencies and other potential ref counting issues
* The RTP engine now allows any RTP implementation to raise RTCP messages.
Potentially, other implementations (such as res_rtp_multicast) could also
raise RTCP information. The engine provides structs to represent RTCP headers
and RTCP SR/RR reports.
* Some general refactoring in res_rtp_asterisk was done to try and tame the
RTCP code. It isn't perfect - that's *way* beyond the scope of this work -
but it does feel marginally better.
* A few random bugs were fixed in the RTCP statistics. (Example: performing an
assignment of a = a is probably not correct)
* We now raise RTCP events for each SR/RR sent/received. Previously we wouldn't
raise an event when we sent a RR report.
Note that this work will be of use to others who want to monitor call quality
or build modules that report call quality statistics. Since the events are now
moving across the Stasis message bus, this is far easier to accomplish. It is
also a first step (though by no means the last step) towards getting Olle's
pinefrog work incorporated.
Again: note that the patch by Jaco Kroon was modified slightly for this work;
however, he did all of the hard work in finding the right places to set the
channel in the RTP engine across the channel drivers. Much thanks goes to Jaco
for his hard work here.
Review: https://reviewboard.asterisk.org/r/2603/
(closes issue ASTERISK-20574)
Reported by: Jaco Kroon
patches:
asterisk-rtcp-channel.patch uploaded by jkroon (License 5671)
(closes issue ASTERISK-21471)
Reported by: Matt Jordan
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@393740 65c4cc65-6c06-0410-ace0-fbb531ad65f3
There was a misunderstanding about ast_bridge_impart()'s handling of the
imparted channel's reference. The channel reference is passed by the
caller unless ast_bridge_impart() returns an error.
* Fixed a memory leak in conf_announce_channel_push() if the impart
failed.
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@392934 65c4cc65-6c06-0410-ace0-fbb531ad65f3
1. Security events
2. Websocket support
3. Diversion header + redirecting support
4. An anonymous endpoint identifier
5. Inbound extension state subscription support
6. PIDF notify generation
7. One touch recording support (special thanks Sean Bright!)
8. Blind and attended transfer support
9. Automatic inbound registration expiration
10. SRTP support
11. Media offer control dialplan function
12. Connected line support
13. SendText() support
14. Qualify support
15. Inband DTMF detection
16. Call and pickup groups
17. Messaging support
Thanks everyone!
Side note: I'm reminded of the song "How Far We've Come" by Matchbox Twenty.
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@392565 65c4cc65-6c06-0410-ace0-fbb531ad65f3
This patch is the initial push to update Asterisk's CDR engine for the new
bridging framework. This patch guts the existing CDR engine and builds the new
on top of messages coming across Stasis. As changes in channel state and bridge
state are detected, CDRs are built and dispatched accordingly. This
fundamentally changes CDRs in a few ways.
(1) CDRs are now *very* reflective of the actual state of channels and bridges.
This means CDRs track well with what an actual channel is doing - which
is useful in transfer scenarios (which were previously difficult to pin
down). It does, however, mean that CDRs cannot be 'fooled'. Previous
behavior in Asterisk allowed for CDR applications, channels, and other
properties to be spoofed in parts of the code - this no longer works.
(2) CDRs have defined behavior in multi-party scenarios. This behavior will not
be what everyone wants, but it is a defined behavior and as such, it is
predictable.
(3) The CDR manipulation functions and applications have been overhauled. Major
changes have been made to ResetCDR and ForkCDR in particular. Many of the
options for these two applications no longer made any sense with the new
framework and the (slightly) more immutable nature of CDRs.
There are a plethora of other changes. For a full description of CDR behavior,
see the CDR specification on the Asterisk wiki.
(closes issue ASTERISK-21196)
Review: https://reviewboard.asterisk.org/r/2486/
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@391947 65c4cc65-6c06-0410-ace0-fbb531ad65f3
Features configuration is handled in its own API in
features_config.h and features_config.c. This way, features
configuration is accessible to anything that needs it.
In addition, features configuration has been altered to
be more channel-oriented. Most callers of features API
code will be supplying a channel so that the individual
channel's settings will be acquired rather than the global
setting.
Missing from this commit is XML documentation for the
features configuration. That will be handled in a separate
commit.
Review: https://reviewboard.asterisk.org/r/2578/
(issue ASTERISK-21542)
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@390751 65c4cc65-6c06-0410-ace0-fbb531ad65f3
The attended transfer API call can complete the attended transfer in a number of ways
depending on the current bridged states of the channels involved.
The hiding of masquerades is done in some bridging-related functions, such as the manager
Bridge action and the Bridge dialplan application. In addition, call pickup was edited
to "move" a channel rather than masquerade it.
Review: https://reviewboard.asterisk.org/r/2511
(closes issue ASTERISK-21334)
Reported by Matt Jordan
(closes issue Asterisk-21336)
Reported by Matt Jordan
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@389848 65c4cc65-6c06-0410-ace0-fbb531ad65f3
This patch moves a number of AMI events over to the Stasis-Core message bus.
This includes:
* ChanSpyStart/Stop
* MonitorStart/Stop
* MusicOnHoldStart/Stop
* FullyBooted/Reload
* All Voicemail/MWI related events
In addition, it adds some Stasis-Core and AMI support for generic AMI messages,
refactors the message router in AMI to use a single router with topic
forwarding for the topics that AMI cares about, and refactors MWI message
types and topics to be more name compliant.
Review: https://reviewboard.asterisk.org/r/2532
(closes issue ASTERISK-21462)
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@389733 65c4cc65-6c06-0410-ace0-fbb531ad65f3
Breaks many things until they can be reworked. A partial list:
chan_agent
chan_dahdi, chan_misdn, chan_iax2 native bridging
app_queue
COLP updates
DTMF attended transfers
Protocol attended transfers
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@389378 65c4cc65-6c06-0410-ace0-fbb531ad65f3
In r388005, macros were introduced to consistently define message
types. This added an assert if a message type was used either before
it was initialized or after it had been cleaned up. It turns out that
this assertion fires during shutdown.
This actually exposed a hidden shutdown ordering problem. Since
unsubscribing is asynchronous, it's possible that the message types
used by the subscription could be freed before the final message of
the subscription was processed.
This patch adds stasis_subscription_join(), which blocks until the
last message has been processed by the subscription. Since joining was
most commonly done right after an unsubscribe, a
stasis_unsubscribe_and_join() convenience function was also added.
Similar functions were also added to the stasis_caching_topic and
stasis_message_router, since they wrap subscriptions and have similar
problems.
Other code in trunk was refactored to join() where appropriate, or at
least verify that the subscription was complete before being
destroyed.
Review: https://reviewboard.asterisk.org/r/2540
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@389011 65c4cc65-6c06-0410-ace0-fbb531ad65f3
The prior code committed, r385473, failed to take into consideration that not
all outgoing calls will be to a peer. My fault.
This patch does the following:
* Check if there is a related peer involved. If there is, check and set NAT
settings according to the peer's settings.
* Fix a problem with realtime peers. If the global setting has auto_force_rport
set and we issued a "sip reload" while a peer is still registered, the peer's
flags for NAT are reset to off. When this happens, we were always setting the
contact address of the peer to that of the full contact info that we had.
(closes issue ASTERISK-21374)
Reported by: jmls
Tested by: Michael L. Young
Patches:
asterisk-21374-fix-crash-and-rt-peers.diff by Michael L. Young (license 5026)
Review: https://reviewboard.asterisk.org/r/2524/
........
Merged revisions 388601 from http://svn.asterisk.org/svn/asterisk/branches/11
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@388602 65c4cc65-6c06-0410-ace0-fbb531ad65f3
An endpoint is an external device/system that may offer/accept
channels to/from Asterisk. While this is a very useful concept for end
users, it is surprisingly not a core concept within Asterisk itself.
This patch defines ast_endpoint as a separate object, which channel
drivers may use to expose their concept of an endpoint. As the channel
driver creates channels, it can use ast_endpoint_add_channel() to
associate channels to the endpoint. This updated the endpoint
appropriately, and forwards all of the channel's events to the
endpoint's topic.
In order to avoid excessive locking on the endpoint object itself, the
mutable state is not accessible via getters. Instead, you can create a
snapshot using ast_endpoint_snapshot_create() to get a consistent
snapshot of the internal state.
This patch also includes a set of topics and messages associated with
endpoints, and implementations of the endpoint-related RESTful
API. chan_sip was updated to create endpoints with SIP peers, but the
state of the endpoints is not updated with the state of the peer.
Along for the ride in this patch is a Stasis test API. This is a
stasis_message_sink object, which can be subscribed to a Stasis
topic. It has functions for blocking while waiting for conditions in
the message sink to be fulfilled.
(closes issue ASTERISK-21421)
Review: https://reviewboard.asterisk.org/r/2492/
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@387932 65c4cc65-6c06-0410-ace0-fbb531ad65f3
RFC6665 4.2.2: ... after a failed State NOTIFY transaction remove the subscription
The problem is that the State Notify requests rely on the 200OK reponse for pacing control
and to not confuse the notify susbsystem.
The issue is, the pendinginvite isn't cleared if a response isn't received,
thus further notify's are never sent.
The solution, follow RFC 6665 4.2.2's 'SHOULD' and remove the subscription after failure.
(closes issue ASTERISK-21677)
Reported by: Dan Martens
Tested by: alecdavis
alecdavis (license 585)
Review https://reviewboard.asterisk.org/r/2475/
........
Merged revisions 387875 from http://svn.asterisk.org/svn/asterisk/branches/1.8
........
Merged revisions 387880 from http://svn.asterisk.org/svn/asterisk/branches/11
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@387885 65c4cc65-6c06-0410-ace0-fbb531ad65f3
RFC 4028 Section 10
if the side not performing refreshes does not receive a
session refresh request before the session expiration, it SHOULD send
a BYE to terminate the session, slightly before the session
expiration. The minimum of 32 seconds and one third of the session
interval is RECOMMENDED.
Prior to this asterisk would refresh at 1/2 the Session-Expires interval,
or if the remote device was the refresher, asterisk would timeout at interval end.
Now, when not refresher, timeout as per RFC noted above.
(closes issue ASTERISK-21742)
Reported by: alecdavis
Tested by: alecdavis
alecdavis (license 585)
Review https://reviewboard.asterisk.org/r/2488/
........
Merged revisions 387344 from http://svn.asterisk.org/svn/asterisk/branches/1.8
........
Merged revisions 387345 from http://svn.asterisk.org/svn/asterisk/branches/11
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@387369 65c4cc65-6c06-0410-ace0-fbb531ad65f3
RFC 4028 Section 7.2
"UACs MUST be prepared to receive a Session-Expires header field in a
response, even if none were present in the request."
What changed
After ASTERISK-20787, inbound calls to asterisk with no Session-Expires in the INVITE are now are offered
a Session-Expires (1800 asterisk default) in the response, with asterisk as the refresher.
Symptom:
After 900 seconds (asterisk default refresher period 1800), asterisk RE-INVITEs the device, the device
may respond with a much lower Session-Expires (180 in our case) value that it is now using.
Asterisk ignores this response, as it's deemed both an INBOUND CALL, and a RE-INVITE.
After 180 seconds the device times out and sends BYE (hangs up), asterisk is still working with the
refresher period of 1800 as it ignored the 'Session Expires: 180' in the previous 200OK response.
Fix:
handle_response_invite() when 200OK, remove check for outbound and reinvite.
(closes issue ASTERISK-21664)
Reported by: alecdavis
Tested by: alecdavis
alecdavis (license 585)
Review https://reviewboard.asterisk.org/r/2463/
........
Merged revisions 387312 from http://svn.asterisk.org/svn/asterisk/branches/1.8
........
Merged revisions 387319 from http://svn.asterisk.org/svn/asterisk/branches/11
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@387327 65c4cc65-6c06-0410-ace0-fbb531ad65f3
When you have lots of SIP peers (according to the issue reporter, around 3500),
the 'sip show peers' CLI command or AMI action can crash due to a poorly placed
string duplication that occurs on the stack. This patch refactors the command
to not allocate the string on the stack, and handles the formatting of a single
peer in a separate function call.
(closes issue ASTERISK-21466)
Reported by: Guillaume Knispel
patches:
fix_sip_show_peers_stack_overflow_asterisk_11.3.0-v2.patch uploaded by gknispel (License 6492)
........
Merged revisions 387134 from http://svn.asterisk.org/svn/asterisk/branches/11
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@387135 65c4cc65-6c06-0410-ace0-fbb531ad65f3
When we reload Asterisk or chan_sip, the flags force_rport and comedia that are
turned on and off when using the auto_force_rport and auto_comedia nat settings
go back to the default setting off. These flags are turned on when needed or
off when not needed at the time that a peer registers, re-registers or initiates
a call. This would apply even when only the default global setting
"nat=auto_force_rport" is being used, which in this case would only affect the
force_rport flag.
Everything is good except for the following: The nat setting is set to
auto_force_rport and auto_comedia. We reload Asterisk and the peer's
registration has not expired. We load in the settings for the peer which turns
force_rport and comedia back to off. Since the peer has not re-registered or
placed a call yet, those flags remain off. We then initiate a call to the peer
from the PBX. The force_rport and comedia flags stay off. If NAT is involved,
we end up with one-way audio since we never checked to see if the peer is behind
NAT or not.
This patch does the following:
* Moves the checking of whether a peer is behind NAT into its own function
* Create a function to set the peer's NAT flags if they are using the auto_* NAT
settings
* Adds calls in sip_request_call() to these new functions in order to setup the
dialog according to the peer's settings
(closes issue ASTERISK-21374)
Reported by: Michael L. Young
Tested by: Michael L. Young
Patches:
asterisk-21374-auto-nat-outgoing-fix_v2.diff Michael L. Young (license 5026)
Review: https://reviewboard.asterisk.org/r/2421/
........
Merged revisions 385473 from http://svn.asterisk.org/svn/asterisk/branches/11
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@385474 65c4cc65-6c06-0410-ace0-fbb531ad65f3
When a BYE request is processed in chan_sip, the current SIP dialog is detached
from its associated Asterisk channel structure. The tech_pvt pointer in the
channel object is set to NULL, and the dialog persists for an RFC mandated
period of time to handle re-transmits.
While this process occurs, the channel is locked (which is good).
Unfortunately, operations that are initiated externally have no way of knowing
that the channel they've just obtained (which is still valid) and that they are
attempting to lock is about to have its tech_pvt pointer removed. By the time
they obtain the channel lock and call the channel technology callback, the
tech_pvt is NULL.
This patch adds a few checks to some channel callbacks that make sure the
tech_pvt isn't NULL before using it. Prime offenders were the DTMF digit
callbacks, which would crash if AMI initiated a DTMF on the channel at the
same time as a BYE was received from the UA. This patch also adds checks on
sip_transfer (as AMI can also cause a callback into this function), as well
as sip_indicate (as lots of things can queue an indication onto a channel).
Review: https://reviewboard.asterisk.org/r/2434/
(closes issue ASTERISK-20225)
Reported by: Jeff Hoppe
........
Merged revisions 385170 from http://svn.asterisk.org/svn/asterisk/branches/1.8
........
Merged revisions 385173 from http://svn.asterisk.org/svn/asterisk/branches/11
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@385174 65c4cc65-6c06-0410-ace0-fbb531ad65f3
The initial report was that the "nat" setting in the [general] section was not
having any effect in overriding the default setting. Upon confirming that this
was happening and looking into what was causing this, it was discovered that
other default settings would not be overriden as well.
This patch works similar to what occurs in build_peer(). We create a temporary
ast_flags structure and using a mask, we override the default settings with
whatever is set in the [general] section.
In the bug report, the reporter who helped to test this patch noted that the
directmedia settings were being overriden properly as well as the nat settings.
This issue is also present in Asterisk 1.8 and a separate patch will be applied
to it.
(issue ASTERISK-21225)
Reported by: Alexandre Vezina
Tested by: Alexandre Vezina, Michael L. Young
Patches:
asterisk-21225-handle-options-default-prob_v4.diff
Michael L. Young (license 5026)
Review: https://reviewboard.asterisk.org/r/2385/
........
Merged revisions 384827 from http://svn.asterisk.org/svn/asterisk/branches/11
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@384828 65c4cc65-6c06-0410-ace0-fbb531ad65f3
When authenticating a SIP request with alwaysauthreject enabled, allowguest
disabled, and autocreatepeer disabled, Asterisk discloses whether a user
exists for INVITE, SUBSCRIBE, and REGISTER transactions in multiple ways. The
information is disclosed when:
* A "407 Proxy Authentication Required" response is sent instead of a
"401 Unauthorized" response
* The presence or absence of additional tags occurs at the end of "403
Forbidden" (such as "(Bad Auth)")
* A "401 Unauthorized" response is sent instead of "403 Forbidden" response
after a retransmission
* Retransmission are sent when a matching peer did not exist, but not when a
matching peer did exist.
This patch resolves these various vectors by ensuring that the responses sent
in all scenarios is the same, regardless of the presence of a matching peer.
This issue was reported by Walter Doekes, OSSO B.V. A substantial portion of
the testing and the solution to this problem was done by Walter as well - a
huge thanks to his tireless efforts in finding all the ways in which this
setting didn't work, providing automated tests, and working with Kinsey on
getting this fixed.
(closes issue ASTERISK-21013)
Reported by: wdoekes
Tested by: wdoekes, kmoore
patches:
AST-2013-003-1.8 uploaded by kmoore, wdoekes (License 6273, 5674)
AST-2013-003-10 uploaded by kmoore, wdoekes (License 6273, 5674)
AST-2013-003-11 uploaded by kmoore, wdoekes (License 6273, 5674)
........
Merged revisions 384003 from http://svn.asterisk.org/svn/asterisk/branches/11
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@384019 65c4cc65-6c06-0410-ace0-fbb531ad65f3
In r373424, several reentrancy problems in chan_sip were addressed. As a
result, the SIP channel driver is now properly locking the channel driver
private information in certain operations that it wasn't previously. This
exposed two latent problems either in register_verify or by functions called
by register_verify. This includes:
* Holding the private lock while calling sip_send_mwi_to_peer. This can create
a new sip_pvt via sip_alloc, which will obtain the channel container lock.
This is a locking inversion, as any channel related lock must be obtained
prior to obtaining the SIP channel technology private lock.
Note that this issue was already fixed in Asterisk 11.
* Holding the private lock while calling sip_poke_peer. In the same vein as
sip_send_mwi_to_peer, sip_poke_peer can create a new SIP private, causing
the same locking inversion.
Note that this locking inversion typically occured when CLI commands were run
while a SIP REGISTER request was being processed, as many CLI commands (such
as 'sip show channels', 'core show channels', etc.) have to obtain the channel
container lock.
(issue ASTERISK-21068)
Reported by: Nicolas Bouliane
(issue ASTERISK-20550)
Reported by: David Brillert
(issue ASTERISK-21314)
Reported by: Badalian Vyacheslav
(issue ASTERISK-21296)
Reported by: Gabriel Birke
........
Merged revisions 383863 from http://svn.asterisk.org/svn/asterisk/branches/1.8
........
Merged revisions 383878 from http://svn.asterisk.org/svn/asterisk/branches/11
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@383879 65c4cc65-6c06-0410-ace0-fbb531ad65f3
Remove MWI's dependency on the event system by moving it to
Stasis-core. This also introduces forwarding topic pools in Stasis-core
which aggregate many dynamically allocated topics into a single primary
topic.
Review: https://reviewboard.asterisk.org/r/2368/
(closes issue ASTERISK-21097)
Patch-by: Kinsey Moore
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@383284 65c4cc65-6c06-0410-ace0-fbb531ad65f3
AMI, HTTP, and chan_sip all support TLS in some way, but none of them
support all the options that Asterisk's TLS core is capable of
interpreting. This prevents consumers of the TLS/SSL layer from setting
TLS/SSL options that they do not support.
This also gets tlsverifyclient closer to a working state by requesting
the client certificate when tlsverifyclient is set. Currently, there is
no consumer of main/tcptls.c in Asterisk that supports this feature and
so it can not be properly tested.
Review: https://reviewboard.asterisk.org/r/2370/
Reported-by: John Bigelow
Patch-by: Kinsey Moore
(closes issue AST-1093)
........
Merged revisions 383165 from http://svn.asterisk.org/svn/asterisk/branches/1.8
........
Merged revisions 383166 from http://svn.asterisk.org/svn/asterisk/branches/11
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@383167 65c4cc65-6c06-0410-ace0-fbb531ad65f3
When a session timer expires during a dialog that has re-negotiated to T.38
and Asterisk is the refresher, Asterisk will send a re-INVITE with an SDP
containing audio media only. This causes some hilarity with the poor fax
session under weigh.
This patch corrects that by sending T.38 parameters if we are in the middle of
a T.38 session.
(closes issue ASTERISK-21232)
Reported by: Nitesh Bansal
patches:
dont-send-audio-reinvite-for-sess-timer-in-t38-call.patch uploaded by nbansal (License 6418)
........
Merged revisions 383124 from http://svn.asterisk.org/svn/asterisk/branches/1.8
........
Merged revisions 383125 from http://svn.asterisk.org/svn/asterisk/branches/11
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@383126 65c4cc65-6c06-0410-ace0-fbb531ad65f3
In ASTERISK-17888, the AMI Registry event during SIP registrations was supposed
to include the Username field. Somehow, one of the events was missed. This
patch corrects that - the Username field should be included in all AMI Registry
events involving SIP registrations.
(issue ASTERISK-17888)
(closes issue ASTERISK-21201)
Reported by: Dmitriy Serov
patches:
chan_sip.c.diff uploaded by Dmitriy Serov (license 6479)
........
Merged revisions 382847 from http://svn.asterisk.org/svn/asterisk/branches/1.8
........
Merged revisions 382848 from http://svn.asterisk.org/svn/asterisk/branches/11
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@382852 65c4cc65-6c06-0410-ace0-fbb531ad65f3
Added an option "discard_remote_hold_retrieval" (default "no") that if set does
not trigger the music on hold event. This essentially stops telling the peer
to start music on hold.
(issue ABE-2899)
Reported by: Denis Alberto Martinez
Review: https://reviewboard.asterisk.org/r/2336/
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@382787 65c4cc65-6c06-0410-ace0-fbb531ad65f3
Prior to this change, certain conditions for sending the message would
result in an address of '(null)' being used in the via header of the
SIP message because a NULl value of pvt->ourip was used when initially
generating the via header. This is fixed by adding a call to build_via
when the address is set before sending the message.
(closes issue ASTERISK-21148)
Reported by: Zhi Cheng
Patches:
700-sip_msg_send_via_fix.patch uploaded by Zhi Cheng (license 6475)
........
Merged revisions 382739 from http://svn.asterisk.org/svn/asterisk/branches/11
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@382746 65c4cc65-6c06-0410-ace0-fbb531ad65f3
Originally, way back in r201583, we added the alternate RTP address so
that the RTP engine would expect to receive audio from a new source
when a glare re-INVITE occurred. In r382589, we remove the alternate
RTP source, as the 'secret' probation mode allows for switching to a new
RTP source when a previous source stops sending RTP. At the time, it
seemed appropriate to set the RTP source based on the information in the
glared re-INVITE.
Unfortunately, that doesn't work so well - in a glared re-INVITE that occurs
with no SDP - such as in a connected line update that glances - we'll set
the RTP source to an invalid address. In subsequent re-INVITE requests from
this Asterisk instance, we'll then send an invalid media address, which will
result in the remote side sending a 488. Whoops.
There isn't any need to reset the RTP source - if we're using strictrtp, we'll
simply synchronize to a new source when we stop getting packets from the old
one. If we aren't using strictrtp, then again there shouldn't be a problem.
Note that the Asterisk Test Suite's connectedline test caught this error.
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@382670 65c4cc65-6c06-0410-ace0-fbb531ad65f3
Often, Asterisk may realize that a change in the source of an RTP stream is
about to occur and ask that the RTP engine reset it's lock on the current RTP
source. In certain scenarios, it may take awhile for the new remote system to
send RTP packets, while the old remote system may continue providing RTP during
that time period. This causes Asterisk to re-lock onto the old source, thereby
rejecting the new source when the old source stops sending RTP and the new
source begins.
This patch prevents that by having a constant secondary, 'secret' probation
mode enabled when an RTP source has been chosen. RTP packets from other sources
are always considered, but never chosen unless the current RTP source stops
sending RTP.
Review: https://reviewboard.asterisk.org/r/2364
(closes issue AST-1124)
Reported by: John Bigelow
Tested by: John Bigelow
(closes issue AST-1125)
Reported by: John Bigelow
Tested by: John Bigelow
........
Merged revisions 382573 from http://svn.asterisk.org/svn/asterisk/branches/11
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@382589 65c4cc65-6c06-0410-ace0-fbb531ad65f3
This patch adds support for RFC 3327 "Path" headers. This can be enabled in
sip.conf using the 'supportpath' setting, either on a global basis or on a
peer basis. This setting enables Asterisk to route outgoing out-of-dialog
requests via a set of proxies by using a pre-loaded route-set defined by the
Path headers in the REGISTER request. This patch also adds Realtime support
for dynamically updating the Path information for a peer.
A huge thank-you to Klaus Darillion and Olle E Johansson for their efforts
in writing this patch.
Review: https://reviewboard.asterisk.org/r/2235/
Review: https://reviewboard.asterisk.org/r/991/
(closes issue ASTERISK-16884)
Reported by: klaus3000
Tested by: klaus3000, oej, mjordan
patches:
path-1.8.0-patch.txt uploaded by klaus3000 (License 5054)
oolong-path-support-trunk in team branch by oej (License 5267)
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@382440 65c4cc65-6c06-0410-ace0-fbb531ad65f3
The original report had to do with a realtime peer behind NAT being pruned and
the peer's private address being used instead of its external address. Upon
debugging, it was discovered that this was being caused by the addition of
the auto_force_rport and auto_comedia settings.
This patch does the following:
* Adds a missing note to the CHANGES file indicating that the default global nat
setting is auto_force_rport
* Constify the 'req' parameter for check_via()
* Add calls to check_via() in a couple of places in order for the auto_*
settings to do their job in attempting to determine if NAT is involved
* Set the flags SIP_NAT_FORCE_RPORT and SIP_PAGE2_SYMMETRICRTP if the auto_*
settings are in use where it was needed
* Moves the copying of peer flags up in build_peer() to before they are used;
this fixes the realtime prune issue
* Update the contrib/realtime schemas to allow the nat column to handle the
different nat setting combinations we have
This patch received a review and "Ship It!" on the issue itself.
(closes issue ASTERISK-20904)
Reported by: JoshE
Tested by: JoshE, Michael L. Young
Patches:
asterisk-20904-nat-auto-and-rt-peersv2.diff Michael L. Young (license 5026)
........
Merged revisions 382322 from http://svn.asterisk.org/svn/asterisk/branches/11
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@382323 65c4cc65-6c06-0410-ace0-fbb531ad65f3
Previously, presencestate information was sent whenever the state was not
NOT_SET. When r381594 actually returned INVALID presence state in all the
places it was supposed to, it caused chan_sip to start adding presence
state information to NOTIFY requests that it previously would not have
added. chan_sip shouldn't be adding presence state information when the
provider is in an invalid state; users can't set the state to invalid and
an invalid state always implies that the provider is in an error condition.
(issue AST-1084)
........
Merged revisions 381613 from http://svn.asterisk.org/svn/asterisk/branches/11
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@381615 65c4cc65-6c06-0410-ace0-fbb531ad65f3
Reference counting for the channel and its tech_pvt got messed up at
some point between 1.8 and 11. The result was that if a BYE for a dialog
that had been replaced (via an INVITE with Replaces) was received, Asterisk
would crash due to trying to access data on a channel that was no longer there.
The fix I introduced is to remove code that both unrefs the sip_pvt and sets
the channel's tech_pvt to NULL when an INVITE with Replaces is handled. This
way when a BYE is received, the tech_pvt will be non-NULL and so the BYE can
be processed and not cause a crash.
(closes issue ASTERISK-20929)
reported by Kristopher Lalletti
patches:
ASTERISK-20929.patch uploaded by Mark Michelson (License #5049)
........
Merged revisions 381566 from http://svn.asterisk.org/svn/asterisk/branches/11
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@381568 65c4cc65-6c06-0410-ace0-fbb531ad65f3
Some bad copy/pasting resulted in using the audio crypto attribute for both
text and video RTP. Also the audio crypto isn't set until after these, so it
was really just bad all around.
(closes ASTERISK-20905)
Reported by: Kristopher Lalletti
patches:
rtp_crypto_video_text.diff uploaded by Jonathan Rose (license 6182)
........
Merged revisions 381553 from http://svn.asterisk.org/svn/asterisk/branches/11
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@381556 65c4cc65-6c06-0410-ace0-fbb531ad65f3
When sip_ref_peer and sip_unref_peer were exported to be usable in
channels/sip/security_events.c, modifications to those functions when
building under REF_DEBUG were not taken into account. This change
moves the necessary defines into sip.h to make them accessible to
other parts of chan_sip that need them.
........
Merged revisions 381282 from http://svn.asterisk.org/svn/asterisk/branches/11
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@381285 65c4cc65-6c06-0410-ace0-fbb531ad65f3
Previously, Asterisk only processed session timer information if both the
'Supported: timer' and 'Session-Expires' headers were present. However, the
Session-Expires header is optional. If we were to receive a request with a
Min-SE greater than our configured session-expires, we would respond with a
'Session-Expires' header that was too small.
This patch cleans the situation up a bit, always processing timer information
if the 'Supported: timer' header is present.
(closes issue ASTERISK-20787)
Reported by: Mark Michelson
Review: https://reviewboard.asterisk.org/r/2299/
........
Merged revisions 380696 from http://svn.asterisk.org/svn/asterisk/branches/1.8
........
Merged revisions 380698 from http://svn.asterisk.org/svn/asterisk/branches/11
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@380699 65c4cc65-6c06-0410-ace0-fbb531ad65f3
A user in #asterisk ran into a problem where a configuration error prevented
the chan_sip module from being loaded. Upon fixing their configuratione error,
they could no longer load the chan_sip module. This was because the
configuration checking happened after the SIP provider was registered with the
Asterisk core, and subsequent attempts to load the SIP module failed as the
provider was already registered.
Since we want to detect any failure in registering chan_sip as early as
possible (as that could be emblematic of a deeper mismatch between module
and Asterisk core), this patch does not change the registration location, but
does ensure that if a module load is declined, we unregister the module as
the SIP api provider.
........
Merged revisions 380480 from http://svn.asterisk.org/svn/asterisk/branches/11
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@380500 65c4cc65-6c06-0410-ace0-fbb531ad65f3
RFC5347 section 2.5.2 states the following:
...
The attribute "T38MaxBitRate" was once incorrectly registered with
IANA as "T38maxBitRate" (lower-case "m"). In accordance with T.38
examples and common implementation practice, the form "T38MaxBitRate"
SHOULD be generated by implementations conforming to this package.
In general, it is RECOMMENDED that implementations of this package
accept lowercase, uppercase, and mixed upper/lowercase encodings of
all the T.38 attributes.
...
Asterisk currently does not perform case insensitive matching on the T.38
attributes. This causes the T38MaxBitRate attribute to be negotiated at
2400 baud instead of 14400 (or whatever value you actually wanted).
This patch makes it so that when we compare T.38 attributes, we do so in a case
insensitive fashion.
Note that while the issue reporter did not directly write the patch, they
contributed to it (and would have provided one themselves if the license had
gone through a tad faster), and hence get attribution for it.
Review: https://reviewboard.asterisk.org/r/2298/
(closes issue ASTERISK-20897)
Reported by: Eric Hill
Tested by: Eric Hill
patches:
-- uploaded by Eric Hill
........
Merged revisions 380458 from http://svn.asterisk.org/svn/asterisk/branches/1.8
........
Merged revisions 380465 from http://svn.asterisk.org/svn/asterisk/branches/11
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@380479 65c4cc65-6c06-0410-ace0-fbb531ad65f3
In r369028, chan_sip's processing of media streams in an SDP was modified to
better handle multiple offered media streams. Part of that change modified
how streams were declined. Previously, declined media streams were not
handled in an RFC compliant manner; now, we set the port number to 0 in the
media stream definition and proceed on with the next media stream.
Unfortunately, the formatting of the declined media stream forgot to append a
'\r\n' to the end of the media stream. This is normally added to the accepted
media streams later on in the processing of the SDP. Since the declined media
stream uses a different buffer than the accepted media streams (and is a
malloc'd buffer as opposed to a struct ast_str), it's easier to just slap the
'\r\n' on the declined media stream buffer rather than attempt to append it
later on.
So, that's what we do. And now some devices (and probably some providers) will
be a bit happier (but probably not terribly happy, since we just rejected
something they offered).
Review: https://reviewboard.asterisk.org/r/2297/
(closes issue ASTERISK-20908)
Reported by: Dennis DeDonatis
Tested by: Dennis DeDonatis
........
Merged revisions 380331 from http://svn.asterisk.org/svn/asterisk/branches/11
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@380332 65c4cc65-6c06-0410-ace0-fbb531ad65f3
Record-Route parsing copied the header into a char[256] array, which can
be a problem if the header is longer than that. This patch parses the
header in place, without the copy, avoiding the issue.
In addition to the original patch, I added a unit test for the new
get_in_brackets_const function.
(closes issue ASTERISK-20837)
Reported by: Corey Farrell
Patches:
chan_sip-build_route-optimized-rev1.patch uploaded by Corey Farrell (license 5909)
(with minor changes by dlee)
........
Merged revisions 379392 from http://svn.asterisk.org/svn/asterisk/branches/1.8
........
Merged revisions 379393 from http://svn.asterisk.org/svn/asterisk/branches/11
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@379394 65c4cc65-6c06-0410-ace0-fbb531ad65f3
XML encoding in chan_sip is accomplished by naively building the XML
directly from strings. While this usually works, it fails to take into
account escaping the reserved characters in XML.
This patch adds an 'ast_xml_escape' function, which works similarly to
'ast_uri_encode'. This is used to properly escape the local_display
attribute in XML formatted NOTIFY messages.
Several things to note:
* The Right Thing(TM) to do would probably be to replace the
ast_build_string stuff with building an ast_xml_doc. That's a much
bigger change, and out of scope for the original ticket, so I
refrained myself.
* It is with great sadness that I wrote my own ast_xml_escape
function. There's one in libxml2, but it's knee-deep in
libxml2-ness, and not easily used to one-off escape a
string.
* I only escaped the string we know is causing problems
(local_display). At least some of the other strings are
URI-encoded, which should be XML safe. Rather than figuring out
what's safe and escaping what's not, it would be much cleaner to
simply build an ast_xml_doc for the messages and let the XML
library do the XML escaping. Like I said, that's out of scope.
(closes issue ABE-2902)
Reported by: Guenther Kelleter
Tested by: Guenther Kelleter
Review: http://reviewboard.digium.internal/r/365/
........
Merged revision 378919 from https://origsvn.digium.com/svn/asterisk/be/branches/C.3-bier
........
Merged revisions 378933 from http://svn.asterisk.org/svn/asterisk/branches/1.8
........
Merged revisions 378934 from http://svn.asterisk.org/svn/asterisk/branches/11
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@378935 65c4cc65-6c06-0410-ace0-fbb531ad65f3
On a multihomed server when sending a NOTIFY message, we were not figuring out
which network should be used to contact the peer.
This patch fixes the problem by calling ast_sip_ouraddrfor() and then
build_via() so that our NOTIFY message contains the correct IP address.
Also, a debug message is being added to help follow the call-id changes that
occur. This was helpful for confirming that the IP address was set properly
since the call-id contains the IP address. It also will be helpful for
troubleshooting purposes when following a call in the debug logs.
(closes issue ASTERISK-20805)
Reported by: Bryan Hunt
Tested by: Bryan Hunt, Michael L. Young
Patches:
asterisk-20805-notify-ip-v2.diff uploaded by Michael L. Young (license 5026)
Review: https://reviewboard.asterisk.org/r/2255/
........
Merged revisions 378554 from http://svn.asterisk.org/svn/asterisk/branches/1.8
........
Merged revisions 378559 from http://svn.asterisk.org/svn/asterisk/branches/11
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@378565 65c4cc65-6c06-0410-ace0-fbb531ad65f3
Asterisk maintains an internal cache for devices in the event subsystem. The
device state cache holds the state of each device known to Asterisk, such that
consumers of device state information can query for the last known state for
a particular device, even if it is not part of an active call. The concept of
a device in Asterisk can include entities that do not have a physical
representation. One way that this occurred was when anonymous calls are allowed
in Asterisk. A device was automatically created and stored in the cache for
each anonymous call that occurred; this was possible in the SIP and IAX2
channel drivers and through channel drivers that utilized the
res_jabber/res_xmpp resource modules (Gtalk, Jingle, and Motif). These devices
are never removed from the system, allowing anonymous calls to potentially
exhaust a system's resources.
This patch changes the event cache subsystem and device state management to
no longer cache devices that are not associated with a physical entity.
(issue ASTERISK-20175)
Reported by: Russell Bryant, Leif Madsen, Joshua Colp
Tested by: kmoore
patches:
event-cachability-3.diff uploaded by jcolp (license 5000)
........
Merged revisions 378303 from http://svn.asterisk.org/svn/asterisk/branches/1.8
........
Merged revisions 378320 from http://svn.asterisk.org/svn/asterisk/branches/10
........
Merged revisions 378321 from http://svn.asterisk.org/svn/asterisk/branches/11
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@378322 65c4cc65-6c06-0410-ace0-fbb531ad65f3
Asterisk had several places where messages received over various network
transports may be copied in a single stack allocation. In the case of TCP,
since multiple packets in a stream may be concatenated together, this can
lead to large allocations that overflow the stack.
This patch modifies those portions of Asterisk using TCP to either
favor heap allocations or use an upper bound to ensure that the stack will not
overflow:
* For SIP, the allocation now has an upper limit
* For HTTP, the allocation is now a heap allocation instead of a stack
allocation
* For XMPP (in res_jabber), the allocation has been eliminated since it was
unnecesary.
Note that the HTTP portion of this issue was independently found by Brandon
Edwards of Exodus Intelligence.
(issue ASTERISK-20658)
Reported by: wdoekes, Brandon Edwards
Tested by: mmichelson, wdoekes
patches:
ASTERISK-20658_res_jabber.c.patch uploaded by mmichelson (license 5049)
issueA20658_http_postvars_use_malloc2.patch uploaded by wdoekes (license 5674)
issueA20658_limit_sip_packet_size3.patch uploaded by wdoekes (license 5674)
........
Merged revisions 378269 from http://svn.asterisk.org/svn/asterisk/branches/1.8
........
Merged revisions 378286 from http://svn.asterisk.org/svn/asterisk/branches/10
........
Merged revisions 378287 from http://svn.asterisk.org/svn/asterisk/branches/11
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@378288 65c4cc65-6c06-0410-ace0-fbb531ad65f3
configured codecs to take precedence on an outgoing call.
This change introduces a new peer configuration property named
'ignore_requested_pref' that causes the requested codec to be ignored when
determining the preferred codec for an outgoing call leg. The consequence is
that Asterisk's usual efforts to prefer avoiding transcoding can be overridden
on a peer-by-peer basis where appropriate.
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@377971 65c4cc65-6c06-0410-ace0-fbb531ad65f3
The issue comes from the fact that transfers may perform
a redirecting update on a channel. The issue is that lock
inversion between the channel and its tech_pvt occurs since
the channel lock is released during the transfer process.
The fix is to move when the redirecting update occurs to a
place where neither the tech_pvt or the channel is locked so
that the two can be locked in the proper order.
(closes issue ASTERISK-20708)
reported by Mark Michelson
patches:
ASTERISK-20708-3.patch uploaded by Mark Michelson (License #5049)
Tested by:
Tim Ringenbach at Asteria Solutions Group
........
Merged revisions 377910 from http://svn.asterisk.org/svn/asterisk/branches/11
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@377911 65c4cc65-6c06-0410-ace0-fbb531ad65f3
During the TLS re-work in chan_sip some TLS specific code was moved
into a separate function. This function operates on a copy of the
incoming SIP request. This copy was never deinitialized causing a
memory leak for each request processed.
This function is now given a SIP request structure which it can use
to copy the incoming request into. This reduces the amount of memory
allocations done since the internal allocated components are reused
between packets and also ensures the SIP request structure is
deinitialized when the TLS connection is torn down.
(closes issue ASTERISK-20763)
Reported by: deti
........
Merged revisions 377257 from http://svn.asterisk.org/svn/asterisk/branches/1.8
........
Merged revisions 377258 from http://svn.asterisk.org/svn/asterisk/branches/10
........
Merged revisions 377259 from http://svn.asterisk.org/svn/asterisk/branches/11
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@377260 65c4cc65-6c06-0410-ace0-fbb531ad65f3
It was a mess. The first part of chan_sip.c is constants, declarations, structures and stuff,
then forward declarations and then actual code. It's still a mess, but a bit less messy ;-)
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@377018 65c4cc65-6c06-0410-ace0-fbb531ad65f3
The principal behind this patch is simple. During a transfer,
we manipulate channels that are owned by a separate thread than
the one we currently are running in, so it makes sense that we
need to grab a reference to the channels so that they cannot
disappear out from under us.
In the wild, crashes were sometimes seen when the transferring
party would hang up the call before the transfer target answered
the call. The most common place to see the crash occur was when
attempting to send a connected line update to the transferer
channel.
(closes issue ASTERISK-20226)
Reported by Jared Smith
Patches:
ASTERISK-20226.patch uploaded by Mark Michelson (License #5049)
Tested by: Jared Smith
........
Merged revisions 376901 from http://svn.asterisk.org/svn/asterisk/branches/1.8
........
Merged revisions 376916 from http://svn.asterisk.org/svn/asterisk/branches/10
........
Merged revisions 376917 from http://svn.asterisk.org/svn/asterisk/branches/11
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@376918 65c4cc65-6c06-0410-ace0-fbb531ad65f3
Websocket by default doesn't return an ast_str for the payload received. When
converting it to an ast_str on chan_sip the last character was being omitted,
because ast_str functions expects that the given length includes the trailing
0x00. payload_len only has the actual string length without counting the
trailing zero.
For most cases this passed unnoticed as most of SIP messages ends with \r\n.
(closes issue ASTERISK-20745)
Reported by: Iñaki Baz Castillo
Review: https://reviewboard.asterisk.org/r/2219/
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@376820 65c4cc65-6c06-0410-ace0-fbb531ad65f3
Asterisk 11 follows RFC3265 that states that after every subscribe or resubscribe a notify should be sent.
Thus the console if filled continuously with the following after every subscribe;
== Extension Changed 8512[phones] new state IDLE for Notify User cisco1
In Asterisk 1.8 only changes would be sent. Thus only when a device state changed was anything emitted to the console.
fix:
Only print to console when device state isn't forced.
(closes issue ASTERISK-20706)
Reported by: alecdavis
Tested by: alecdavis
alecdavis (license 585)
........
Merged revisions 376540 from http://svn.asterisk.org/svn/asterisk/branches/11
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@376541 65c4cc65-6c06-0410-ace0-fbb531ad65f3
The new field is will show up within the response if the requested peer has a
subscribe context set.
(closes issue ASTERISK-20626)
Reported by: Jaco Kroon
Patches:
asterisk-sip-ami-SubscrContext.patch uploaded by jkroon (license 5671)
-with modifications by jrose to conform to style guidelines
Review: https://reviewboard.asterisk.org/r/2195/
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@376219 65c4cc65-6c06-0410-ace0-fbb531ad65f3
With ICE support enabled in chan_sip and a large number of interfaces on the system it was
possible for the produced SDP to be truncated due to some fixed size buffers. These buffers
have now been changed so they will dynamically grow as needed.
ICE support is now also enabled by default in res_rtp_asterisk to provide a smoother experience
for chan_motif users where it is required. To maintain the previous behavior in chan_sip it is
no longer enabled by default there.
(closes issue ASTERISK-20643)
Reported by: coopvr
........
Merged revisions 376130 from http://svn.asterisk.org/svn/asterisk/branches/11
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@376131 65c4cc65-6c06-0410-ace0-fbb531ad65f3
While looking at some debug logs, I noticed that it was being reported that the
SDP origin line was unsupported or failed. Upon looking into this on my local
machine, I found that I too was getting this debug message yet everything seemed
to be getting processed properly. What was discovered is, that, the variable to
determine what is displayed in the debug message for the SDP line that was
processed, was not being set for the origin line when the result was successful.
This patch fixes this and was tested on local machine.
........
Merged revisions 375594 from http://svn.asterisk.org/svn/asterisk/branches/1.8
........
Merged revisions 375601 from http://svn.asterisk.org/svn/asterisk/branches/10
........
Merged revisions 375613 from http://svn.asterisk.org/svn/asterisk/branches/11
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@375614 65c4cc65-6c06-0410-ace0-fbb531ad65f3
A regression was introduced in chan_sip by changes to sip reload introduced by
r349097. That patch moved peer purging from the beginning of the reload to
after the general configuration was finished. This patch fixes that by undoing
the repositioning of the original peer purging code and using a similar
function after performing general configuration that purges only autocreated
peers that were created when persist mode isn't enabled.
(closes issue ASTERISK-20611)
Reported by: Alisher
Review: https://reviewboard.asterisk.org/r/2171/
........
Merged revisions 375575 from http://svn.asterisk.org/svn/asterisk/branches/11
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@375576 65c4cc65-6c06-0410-ace0-fbb531ad65f3
If a "sip reload" is issued for a SIP peer, then his
IP address will be cleared, thus resulting in forgetting the
public IP address. Asterisk will then attempt to route SIP
traffic to the private IP address.
The fix here is to make "sip reload" ignore realtime peers
when "host = dynamic" is spotted. Realtime peers can now only
have their IP address reset if they have gone from being not
dynamic to being dynamic.
(closes issue ASTERISK-18203)
reported by daren ferreira
(closes issue ASTERISK-20572)
reported by JoshE
Patches:
fix_nat_realtime.diff uploaded by JoshE (license #6075)
........
Merged revisions 375415 from http://svn.asterisk.org/svn/asterisk/branches/1.8
........
Merged revisions 375417 from http://svn.asterisk.org/svn/asterisk/branches/10
........
Merged revisions 375437 from http://svn.asterisk.org/svn/asterisk/branches/11
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@375443 65c4cc65-6c06-0410-ace0-fbb531ad65f3
Remove the "RTP Read too short" warning for RTP keepalives. Remove the
the warning about the application delimiter switch from pipe to comma.
(You should've done this by now.) Make cdr_odbc report more when an
insert fails. Make chan_sip warn less when the peer wants SRTP (and we
don't) or sends a zero port to disable a media type.
Review: https://reviewboard.asterisk.org/r/2167
(closes issue ASTERISK-20538)
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@375137 65c4cc65-6c06-0410-ace0-fbb531ad65f3
In many cases (for peers behind NAT or for TCP sockets) we do not need
to look up any hostname in the Contact (or Route) when sending an
in-dialog request. This should reduce netsock2.c: getaddrinfo errors in
certain scenarios.
Review: https://reviewboard.asterisk.org/r/2156
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@375110 65c4cc65-6c06-0410-ace0-fbb531ad65f3
Update and extend the configuration_file group and enable linking. Update title that was left behind many years ago.
(issue ASTERISK-20259)
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@375006 65c4cc65-6c06-0410-ace0-fbb531ad65f3
This is used to solve an issue where a poll on a file
descriptor does not necessarily correspond to the readiness
of a FILE handle to be read.
This change makes it so that for TCP connections, we do a
recv() on the file descriptor instead.
Because TCP does not guarantee that an entire message or even
just one single message will arrive during a read, a loop has
been introduced to ensure that we only attempt to handle a
single message at a time. The tcptls_session_instance structure
has also had an overflow buffer added to it so that if more
than one TCP message arrives in one go, there is a place to
throw the excess.
Huge thanks goes out to Walter Doekes for doing extensive review
on this change and finding edge cases where code could fail.
(closes issue ASTERISK-20212)
reported by Phil Ciccone
Review: https://reviewboard.asterisk.org/r/2123
........
Merged revisions 374905 from http://svn.asterisk.org/svn/asterisk/branches/1.8
........
Merged revisions 374906 from http://svn.asterisk.org/svn/asterisk/branches/10
........
Merged revisions 374914 from http://svn.asterisk.org/svn/asterisk/branches/11
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@374924 65c4cc65-6c06-0410-ace0-fbb531ad65f3
During testing, it was discovered that having chan_sip
export global symbols was problematic.
The biggest problem was that load order was affected.
Trying to use realtime could be problematic since in
all likelihood the necessary realtime driver(s) would
not be loaded before chan_sip.
In addition, it was found that it was impossible to
use the Digium Phone Module for Asterisk since it
must be loaded before chan_sip since it must hook
into chan_sip's configuration parsing.
The solution is to use a virtual table in the same
manner that other modules in Asterisk do, like
app_voicemail.
(closes issue ASTERISK-20545)
Reported by: kmoore
........
Merged revisions 374842 from http://svn.asterisk.org/svn/asterisk/branches/11
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@374849 65c4cc65-6c06-0410-ace0-fbb531ad65f3
This allows for the REDIRECTING dialplan function to be
used to set the reason to any string.
The SIP channel driver has been modified to set the redirecting
reason string to the value received in a Diversion header. In
addition, SIP 480 response reason text will set the redirecting
reason as well.
(closes issue AST-942)
reported by Malcolm Davenport
(closes issue AST-943)
reported by Malcolm Davenport
Review: https://reviewboard.asterisk.org/r/2101
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@373701 65c4cc65-6c06-0410-ace0-fbb531ad65f3
The SIP session timer mechanism contains a mandatory 'refresher' parameter
(included in the Session-Expires header) which is used in the session timer
offer/answer signaling within a SIP Invite dialog. It looks like asterisk is
interpreting the uac resp. uas role only as the initial role of client and
server (caller is uac, callee is uas). The standard rfc 4028 however assigns
the client role to the ((RE)-Invite) requester, the server role to the
((RE)-Invite) responder.
This patch has Asterisk track the actual refresher as "us" or "them" as opposed
to relying on just the configured "uas" or "uac" properties.
(closes issue AST-922)
Reported by: Thomas Airmont
Review: https://reviewboard.asterisk.org/r/2118/
........
Merged revisions 373652 from http://svn.asterisk.org/svn/asterisk/branches/1.8
........
Merged revisions 373665 from http://svn.asterisk.org/svn/asterisk/branches/10
........
Merged revisions 373690 from http://svn.asterisk.org/svn/asterisk/branches/11
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@373691 65c4cc65-6c06-0410-ace0-fbb531ad65f3
When setting CALLERID(pres)=unavailable in the dialplan, the From header
in the SIP message contains "Anonymous" <sip:Anonymous@anonymous.invalid>.
For consistency, Asterisk should use a lowercase a in the userpart of the
URI.
* Make the From header use a lowercase A in the userpart of the anonymous
URI.
(closes issue ASTERISK-19838)
Reported by: Antti Yrjola
Patches:
chan_sip_patch_ASTERISK-19838.patch (license #6383) patch uploaded by Antti Yrjola
........
Merged revisions 373500 from http://svn.asterisk.org/svn/asterisk/branches/1.8
........
Merged revisions 373501 from http://svn.asterisk.org/svn/asterisk/branches/10
........
Merged revisions 373502 from http://svn.asterisk.org/svn/asterisk/branches/11
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@373503 65c4cc65-6c06-0410-ace0-fbb531ad65f3
Asterisk v1.8 and later was not as vulnerable to this issue.
* Made find_call() lock each private as it processes the found dialogs.
(Primary cause of ABE-2876)
* Made the other functions that traverse the dialogs container lock each
private as it examines them.
* Fix race condition in sip_call() if the thread that sent the INVITE is
held up long enough for a response to be processed. The p->initid for the
INVITE retransmission could be added after it was canceled by the response
processing.
* Made __sip_destroy() clean up resource pointers after freeing. This is
primarily defensive in case someone has a stale private pointer.
* Removed redundant memset() in reqprep(). The call to init_req() already
does the memset() and is the first reference to req in reqprep().
* Removed useless set of req.method in transmit_invite(). The calls to
initreqprep() and reqprep() have to do this because they memset() the req.
JIRA ABE-2876
..........
Merged -r373423 from https://origsvn.digium.com/svn/asterisk/be/branches/C.3-bier
........
Merged revisions 373424 from http://svn.asterisk.org/svn/asterisk/branches/1.8
........
Merged revisions 373466 from http://svn.asterisk.org/svn/asterisk/branches/10
........
Merged revisions 373469 from http://svn.asterisk.org/svn/asterisk/branches/11
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@373471 65c4cc65-6c06-0410-ace0-fbb531ad65f3
If conditions were right it was possible for both the PBX core and chan_sip to deadlock by both having a lock that the other
wants. In the case of the PBX core it had the contexts lock and wanted a SIP dialog lock, while in the case of chan_sip it
had the SIP dialog lock and wanted the contexts lock.
This fix unlocks the SIP dialog before getting the extension state so that the other thread will not block on trying to lock
it. Once the extension state is retrieved the SIP dialog is locked again and life carries on.
As the SIP dialog is reference counted it is not possible for it to go away after unlocking.
(closes issue ASTERISK-20437)
Reported by: jhutchins
........
Merged revisions 373438 from http://svn.asterisk.org/svn/asterisk/branches/1.8
........
Merged revisions 373440 from http://svn.asterisk.org/svn/asterisk/branches/10
........
Merged revisions 373454 from http://svn.asterisk.org/svn/asterisk/branches/11
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@373456 65c4cc65-6c06-0410-ace0-fbb531ad65f3
The H.264 format attribute module compares two format attribute structures to determine if they are
compatible or not. In some instances it was possible for this check to determine that both structures
were incompatible when they actually should be considered compatible. This check has now been made even
more permissive by assuming that if no attribute information is available the two structures are compatible.
If both structures contain attribute information a base level comparison of the H.264 IDC value is done to
see if they are compatible or not.
The above issue uncovered a secondary issue in chan_sip where the SDP being produced would be incorrect if
the formats were considered incompatible. This has now been fixed by checking that all information required
to produce the SDP is available instead of assuming it is.
(closes issue ASTERISK-20464)
Reported by: Leif Madsen
........
Merged revisions 373413 from http://svn.asterisk.org/svn/asterisk/branches/11
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@373414 65c4cc65-6c06-0410-ace0-fbb531ad65f3
* Whitespace, doc-blocks, spelling, case, missing and incorrect tags.
* Add cleanup to Makefile for the Doxygen configuration update
* Start updating Doxygen configuration for cleaner output
* Enable inclusion of configuration files into documentation
* remove mantisworkflow...
* update documentation README
* Add markup to Tilghman's email and talk with him about updating his email, he knows...
* no code changes on this commit other than the mentioned Makefile change
(issue ASTERISK-20259)
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@373384 65c4cc65-6c06-0410-ace0-fbb531ad65f3
As mentioned on the review for this, WebRTC has moved towards choosing
DTLS-SRTP as the mechanism for key exchange for SRTP. This commit adds
support for this but makes it available for normal SIP clients as well.
Testing has been done to ensure that this introduces no regressions with
existing behavior and also that it functions as expected.
Review: https://reviewboard.asterisk.org/r/2113/
........
Merged revisions 373229 from http://svn.asterisk.org/svn/asterisk/branches/11
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@373234 65c4cc65-6c06-0410-ace0-fbb531ad65f3
When the patch to handle arbitrary SDP stream arrangements went into
Asterisk, it also included an ability to transparently decline unknown
stream types. The scanf calls used were not checked properly causing
this part of the functionality to be broken.
(closes issue ASTERISK-20203)
........
Merged revisions 373211 from http://svn.asterisk.org/svn/asterisk/branches/11
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@373212 65c4cc65-6c06-0410-ace0-fbb531ad65f3
This patch resolves two sources of memory leaks when using TLS in Asterisk:
1) It removes improper initialization (and multiple re-initializations) of
portions of the SSL library. Asterisk calls SSL_library_init and
SSL_load_error_strings during SSL initialization; collectively this
obviates the need for calling any of the following during initialization
or client connection handling:
* ERR_load_crypto_strings (handled by SSL_load_error_strings)
* OpenSSL_add_all_algorithms (synonym for SSL_library_init)
* SSLeay_add_ssl_algorithms (synonym for SSL_library_init)
2) Failure to completely clean up all memory allocated by Asterisk and by
the SSL library for TLS clients. This included not freeing the SSL_CTX
object in the SIP channel driver, as well as not clearing the error
stack when the TLS client exited.
Note that these memory leaks were found by Thomas Arimont, and this patch
was essentially written by him with some minor tweaks.
(closes issue AST-889)
Reported by: Thomas Arimont
Tested by: Thomas Arimont
patches:
(bugAST-889.patch) by Thomas Arimont (license 5525)
Review: https://reviewboard.asterisk.org/r/2105
........
Merged revisions 373061 from http://svn.asterisk.org/svn/asterisk/branches/1.8
........
Merged revisions 373062 from http://svn.asterisk.org/svn/asterisk/branches/10
........
Merged revisions 373079 from http://svn.asterisk.org/svn/asterisk/branches/11
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@373080 65c4cc65-6c06-0410-ace0-fbb531ad65f3
Prior to this patch, The acknowledgement wasn't produced until after
executing the sip_poke_peer action actually responsible for
qualifying the peer. Now the response is given immediately once it is
known that a peer will be qualified and a SIPqualifypeerdone event
is issued when the process is finished. Thanks to OEJ for identifying
the problem and helping to come up with a solution.
(issue AST-969)
Reported by John Bigelow
Review: https://reviewboard.asterisk.org/r/2098/
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@372808 65c4cc65-6c06-0410-ace0-fbb531ad65f3
Prior to 1.8, it was not necessary for an explicit "type" to be set for an
asterisk LDAP realtime peer. Now the routine find_peer actually checks the
type field during registration and fails to find the peer if it is not set.
The attached patch makes the realtime type equal whatever type is being
searched for if the type is 0 upon return from routine build_peer.
(closes issue ASTERISK-17222)
Reported by: John Covert
Patch by: David Vossel
Tested by: Darren Sessions
Review: https://reviewboard.asterisk.org/r/2095/
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@372290 65c4cc65-6c06-0410-ace0-fbb531ad65f3
The problem had to do with logic used when checking for what the oldest ringing channel
was. The problem was that if no channel was found, then no notification would be sent.
For custom device states, there is no associated channel, so no notification would get
sent. This fixes the issue by still sending the notification even if no associated
channel can be found for a ringing device state change.
(closes issue ASTERISK-20297)
Reported by Noah Engelberth
........
Merged revisions 372137 from http://svn.asterisk.org/svn/asterisk/branches/11
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@372138 65c4cc65-6c06-0410-ace0-fbb531ad65f3
This patch fixes numerous doxygen warnings across Asterisk. It also updates
the makefile to regenerate the doxygen configuration on the local system
before running doxygen to help prevent warnings/errors on the local system.
Much thanks to Andrew for tackling one of the Asterisk janitor projects!
(issue ASTERISK-20259)
Reported by: Andrew Latham
Patches:
doxygen_partial.diff uploaded by Andrew Latham (license 5985)
make_progdocs.diff uploaded by Andrew Latham (license 5985)
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@371989 65c4cc65-6c06-0410-ace0-fbb531ad65f3
Matt Jordan informed me that it was more appropriate to use an
astman_send_ack here instead of making an event response. I've also
used this opportunity to update UPGRADE.txt to mention this change
in behavior.
(issue AST-969)
Reported by: John Bigelow
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@371889 65c4cc65-6c06-0410-ace0-fbb531ad65f3
Prior to this patch, Issuing SIPqualifypeer either resulted in an
error or if it succeeded, a few \r\ns. This patch adds a
SIPqualifypeerComplete event issued as a response when the command
is successfully executed.
(closes issue AST-969)
Reported by: John Bigelow
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@371823 65c4cc65-6c06-0410-ace0-fbb531ad65f3
The helper function, get_address_family_filter, in chan_sip for dns resolution
by address family was not recognizing the websockets transport and resulting in
a null pointer being sent to functions in netsock2, in an attempt to determine
if we are bound to ANY address ([::]) or not.
This patch fixes this issue by handling the transport types SIP_TRANSPORT_WS and
SIP_TRANSPORT_WSS which results in a sock address being set properly for use in
determining the address family.
(closes issue ASTERISK-20221)
Reported by: Sven Beisiegel
Tested by: Sven Beisiegel, James Mortensen
Patches:
asterisk-20221-ws-family-filter.diff uploaded by Michael L. Young (license 5026)
........
Merged revisions 371295 from http://svn.asterisk.org/svn/asterisk/branches/11
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@371296 65c4cc65-6c06-0410-ace0-fbb531ad65f3
This adds HANGUPCAUSE information to called channels so that hangup
handlers can, in conjunction with predial dialplan execution, access
the hangupcause information when the dialed channel hangs up on a
one-to-one basis instead of a many-to-one basis as with HANGUPCAUSE
usage on the caller channel.
Review: https://reviewboard.asterisk.org/r/2069/
(closes issue ASTERISK-20198)
........
Merged revisions 371258 from http://svn.asterisk.org/svn/asterisk/branches/11
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@371259 65c4cc65-6c06-0410-ace0-fbb531ad65f3
This patch adds the feature "Private representation of caller, connected
and redirecting party ids", as previously discussed with us (DATUS) and
Digium.
1. Feature motivation
Until now it is quite difficult to modify a party number or name which can
only be seen by exactly one particular instantiated technology channel
subscriber. One example where a modified party number or name on one
channel is spread over several channels are supplementary services like
call transfer or pickup. To implement these features Asterisk internally
copies caller and connected ids from one channel to another. Another
example are extension subscriptions. The monitoring entities (watchers)
are notified of state changes and - if desired - of party numbers or names
which represent the involving call parties. One major feature where a
private representation of party names is essentially needed, i.e. where a
party name shall be exclusively signaled to only one particular user, is a
private user-specific name resolution for party numbers. A lookup in a
private destination-dependent telephone book shall provide party names
which cannot be seen by any other user at any time.
2. Feature Description
This feature comes along with the implementation of additional private
party id elements for caller id, connected id and redirecting ids inside
Asterisk channels.
The private party id elements can be read or set by the user using
Asterisk dialplan functions.
When a technology channel is initiating a call, receives an internal
connected-line update event, or receives an internal redirecting update
event, it merges the corresponding public id with the private id to create
an effective party id. The effective party id is then used for protocol
signaling.
The channel technologies which initially support the private id
representation with this patch are SIP (chan_sip), mISDN (chan_misdn) and
PRI (chan_dahdi).
Once a private name or number on a channel is set and (implicitly) made
valid, it is generally used for any further protocol signaling until it is
rewritten or invalidated.
To simplify the invalidation of private ids all internally generated
connected/redirecting update events and also all connected/redirecting
update events which are generated by technology channels -- receiving
regarding protocol information - automatically trigger the invalidation of
private ids.
If not using the private party id representation feature at all, i.e. if
using only the 'regular' caller-id, connected and redirecting related
functions, the current characteristic of Asterisk is not affected by the
new extended functionality.
3. User interface Description
To grant access to the private name and number representation from the
Asterisk dialplan, the CALLERID, CONNECTEDLINE and REDIRECTING dialplan
functions are extended by the following data types. The formats of these
data types are equal to the corresponding regular 'non-private' already
existing data types:
CALLERID:
priv-all
priv-name priv-name-valid priv-name-charset priv-name-pres
priv-num priv-num-valid priv-num-plan priv-num-pres
priv-subaddr priv-subaddr-valid priv-subaddr-type priv-subaddr-odd
priv-tag
CONNECTEDLINE:
priv-name priv-name-valid priv-name-pres priv-name-charset
priv-num priv-num-valid priv-num-pres priv-num-plan
priv-subaddr priv-subaddr-valid priv-subaddr-type priv-subaddr-odd
priv-tag
REDIRECTING:
priv-orig-name priv-orig-name-valid priv-orig-name-pres priv-orig-name-charset
priv-orig-num priv-orig-num-valid priv-orig-num-pres priv-orig-num-plan
priv-orig-subaddr priv-orig-subaddr-valid priv-orig-subaddr-type priv-orig-subaddr-odd
priv-orig-tag
priv-from-name priv-from-name-valid priv-from-name-pres priv-from-name-charset
priv-from-num priv-from-num-valid priv-from-num-pres priv-from-num-plan
priv-from-subaddr priv-from-subaddr-valid priv-from-subaddr-type priv-from-subaddr-odd
priv-from-tag
priv-to-name priv-to-name-valid priv-to-name-pres priv-to-name-charset
priv-to-num priv-to-num-valid priv-to-num-pres priv-to-num-plan
priv-to-subaddr priv-to-subaddr-valid priv-to-subaddr-type priv-to-subaddr-odd
priv-to-tag
Reported by: Thomas Arimont
Review: https://reviewboard.asterisk.org/r/2030/
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@371120 65c4cc65-6c06-0410-ace0-fbb531ad65f3
A recent change made it so that device state changes that were
not actual "changes" would not get reported to subscribers. The
problem was that this inadvertently blocked presence updates as
well.
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@371113 65c4cc65-6c06-0410-ace0-fbb531ad65f3
Quote from review board:
This patch extends the extension state callbacks so that monitoring channels
(as chan_sip) get more information of the devices which are responsible for
an extension state change. The additional information is needed by chan_sip
to present names/numbers of the caller and callee in an early-state SIP
notification. Users of extenstion state callback not interested in the
additional information are not affected by the changes.
Motivation: to present the involved party's name/number in an early-state
nofification (used by the notified device as a pickup offer) one after another
so that a user can see which call he will pick up in an undirected pickup.
Such a pickup offer to a user shall indicate the same call (number/name-A calls
number/name-B) as the call which would be picked up when an undirected pickup
is executed.
Users interested in additional state info must use the new functions
ast_extension_state_add_extended() resp.
ast_extension_state_add_destroy_extended() to register an extended state
callback. When the callback is registered this way, an extra member
device_state_info of struct ast_state_cb_info is passed to the callback in
addition to the aggregated extension state. This container holds an object for
every device of the monitored extension hint consisting of the device name, the
device state and a channel reference to the channel which (presumably) caused
the device state.
The information is used by chan_sip for early-state notifications. When the
state of a device changes and the new state contains AST_EVENT_RINGING, an
early-state notification is sent to the subscribed devices with the
caller/callee names/numbers of the oldest ringing channel of the monitored
extension. The notified user may then invoke a direct pickup, which will pickup
exactly this channel.
Users of the old non-extended callbacks will only be called when the aggregated
state did change (same behavior as before). Users of the extended callback will
also be called when the state is unchanged but does contain AST_EVENT_RINGING.
That could be the case if two channels are ringing at one device and one of
them hangs up, so the aggregated state does not change. This way the monitoring
channel can create a new early-state notification with the now ringing
party-ids.
Review: https://reviewboard.asterisk.org/r/2048
This contribution comes from Guenther Kelleter
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@370979 65c4cc65-6c06-0410-ace0-fbb531ad65f3
This patch adds named calledgroups/pickupgroups to Asterisk. Named groups are
implemented in parallel to the existing numbered callgroup/pickupgroup
implementation. However, unlike the existing implementation, which is limited
to a maximum of 64 defined groups, the number of defined groups allowed for
named callgroups/pickupgroups is effectively unlimited.
Named groups are configured with the keywords "namedcallgroup" and
"namedpickupgroup". This corresponds to the numbered group definitions of
"callgroup" and "pickupgroup". Note that as the implementation of named groups
coexists with the existing numbered implementation, a defined named group of
"4" does not equate to numbered group 4.
Support for the named groups has been added to the SIP, DAHDI, and mISDN channel
drivers.
Review: https://reviewboard.asterisk.org/r/2043
Uploaded by:
Guenther Kelleter(license #6372)
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@370831 65c4cc65-6c06-0410-ace0-fbb531ad65f3
........
r370769 | mmichelson | 2012-08-03 16:35:00 -0500 (Fri, 03 Aug 2012) | 24 lines
Fix error in the "IPorHost" section of a SIP dialstring.
This is based on the review request posted by Walter Doekes
(referenced lower in the commit message)
The main fix here is to treat the IPorHost portion of the dial
string as a temporary outbound proxy. This ensures requests
get sent to the proper location.
Due to the age of the request, some parts were no longer relevant.
For instance, the request moved outbound proxy parsing code into
a single method. This is done in a previous commit, so it was not
necessary to do again.
Also, the review request fixed some errors with regards to request
routing for CANCEL and ACK requests. This has also been fixed in
more recent commits.
(closes issue ASTERISK-19677)
reported by Walter Doekes
Review https://reviewboard.asterisk.org/r/1859
........
r370770 | mmichelson | 2012-08-03 16:39:35 -0500 (Fri, 03 Aug 2012) | 3 lines
Remove unused variable.
........
r370771 | mmichelson | 2012-08-03 16:43:52 -0500 (Fri, 03 Aug 2012) | 5 lines
Seriously? Another compilation error fixed.
Somebody beat me.
........
Merged revisions 370769-370771 from http://svn.asterisk.org/svn/asterisk/branches/1.8
........
Merged revisions 370772 from http://svn.asterisk.org/svn/asterisk/branches/10
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@370773 65c4cc65-6c06-0410-ace0-fbb531ad65f3
When the chan_sip cleanup went in, a typo was included that caused some
subscriptions of non-Polycom phones to be limited to the same
capabilities as Polycom phones. This resolves the failures in the test
suite resulting from this regression.
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@370740 65c4cc65-6c06-0410-ace0-fbb531ad65f3
This is a patch from kkm from review board.
This is useful for adding headers to REFER requests that
emanate from a Transfer() dialplan application call.
This also fixes some uses of the Referred-by header, removing
an extra set of angle brackets.
I've modified the reporter's original patch to not require
any additions to the sip_refer header and to just remove the
referred_by_name from sip_refer since it is no longer needed
or used.
(closes Issue ASTERISK-17639)
reported by Kirill Katsnelson
Patches:
019059-sip-refer-addheaders-trunk-353549.diff
uploaded by Kirill Katsnelson (license #5845)
Review: https://reviewboard.asterisk.org/r/1159
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@370691 65c4cc65-6c06-0410-ace0-fbb531ad65f3
With a large number of SIP peers registered, performing a SIP reload causes a
flood of SIP OPTIONS request packets. These are immediately sent out, and, as
responses come back, can cause peers to be flagged as 'lagged' due to handling
of the many response messages.
This fix prevents this "packet storm" and schedules the pokes for a random
time. That time varies between 1 ms and the peer's qualify time, or, if
the qualify time is unknown, the global qualifyfreq setting.
The committed patch has some very small modifications to the patch schmidts
wrote for the review.
(closes issue ASTERISK-19154)
Reported by: Nicolo Mazzon
patches:
issue19154.patch license #6034 uploaded by schmidts
Review: https://reviewboard.asterisk.org/r/1652
........
Merged revisions 370666 from http://svn.asterisk.org/svn/asterisk/branches/1.8
........
Merged revisions 370672 from http://svn.asterisk.org/svn/asterisk/branches/10
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@370677 65c4cc65-6c06-0410-ace0-fbb531ad65f3
This clean up was broken out from
https://reviewboard.asterisk.org/r/1976/ and addresses the following:
- struct sip_refer converted to use the stringfields API.
- sip_{refer|notify}_allocate -> sip_{notify|refer}_alloc to match
other *alloc functions.
- Replace get_msg_text, get_msg_text2 and get_pidf_body -> No, not
get_pidf_msg_text_body3 but get_content, to match add_content.
- get_body doesn't get the request body, renamed to get_content_line.
- get_body_by_line doesn't get the body line, and is just a simple if
test. Moved code inline and removed function.
- Remove camelCase in struct sip_peer peer state variables,
onHold -> onhold, inUse -> inuse, inRinging -> ringing.
- Remove camelCase in struct sip_request rlPart1 -> rlpart1,
rlPart2 -> rlpart2.
- Rename instances of pvt->randdata to pvt->nonce because that is what
it is, no need to update struct sip_pvt because _it already has a
nonce field_.
- Removed struct sip_pvt randdata stringfield.
- Remove useless (and inconsistent) 'header' suffix on variables in
handle_request_subscribe.
- Use ast_strdupa on Event header in handle_request_subscribe to avoid
overly complicated strncmp calls to find the event package.
- Move get_destination check in handle_request_subscribe to avoid
duplicate checking for packages that don't need it.
- Move extension state callback management in handle_request_subscribe
to avoid duplicate checking for packages that don't need it.
- Remove duplicate append_date prototype.
- Rename append_date -> add_date to match other add_xxx functions.
- Added add_expires helper function, removed code that manually added
expires header.
- Remove _header suffix on add_diversion_header (no other header adding
functions have this).
- Don't pass req->debug to request handle_request_XXXXX handlers if req
is also being passed.
- Don't pass req->ignore to check_auth as req is already being passed.
- Don't create a subscription in handle_request_subscribe if
p->expiry == 0.
- Don't walk of the back of referred_by_name when splitting string in
get_refer_info
- Remove duplicate check for no dialog in handle_incoming when
sipmethod == SIP_REFER, handle_request_refer checks for that.
Review: https://reviewboard.asterisk.org/r/1993/
Patch-by: gareth
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@370636 65c4cc65-6c06-0410-ace0-fbb531ad65f3
This patch was submitted by mnicholson a while back. It adds a new AMI action
which allows users to request SIP peer status on demand similar to existing
PeerStatus events and to the output you would see from CLI with sip show peer
Review: https://reviewboard.asterisk.org/r/1098/
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@370518 65c4cc65-6c06-0410-ace0-fbb531ad65f3
The HANGUPCAUSE hash (trunk only) meant to replace SIP_CAUSE has now
been replaced with the HANGUPCAUSE and HANGUPCAUSE_KEYS dialplan
functions to better facilitate access to the AST_CAUSE translations
for technology-specific cause codes. The HangupCauseClear application
has also been added to remove this data from the channel.
(closes issue SWP-4738)
Review: https://reviewboard.asterisk.org/r/2025/
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@370316 65c4cc65-6c06-0410-ace0-fbb531ad65f3
A number of applications/AMI commands in Asterisk have specific behavioral
differences depending on the resource or channel technology those
applications are executed on. For example, the MessageSend application/
command is technology agnostic, but how the channel drivers that support
that functionality behave is dependant on the protocols and channel
driver implementation. Prior to this patch, those details were either
documented in the application/command documentation itself, or were left
undocumented.
This patch adds a new element to the documentation schema, <info/>. An info
node is essentially a piece of technology specific reference information that
can be included by any top level XML documentation node. For example, the
MessageSend application can now include XMPP/SIP specific information, where
that technology specific information can be defined in chan_motif/res_xmpp/
chan_sip. Likewise, that information can also be included in the MessageSend
AMI command.
Review: https://reviewboard.asterisk.org/r/2049
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@370278 65c4cc65-6c06-0410-ace0-fbb531ad65f3
This fix involves moving the allocation of some temporary codec structures to the heap and also reduces the number of maximum payloads to something more sane for both regular and low memory builds.
(closes issue ASTERISK-20140)
Reported by: jonnt
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@370171 65c4cc65-6c06-0410-ace0-fbb531ad65f3
This patch adds Named ACL functionality to Asterisk. This allows system
administrators to define an ACL and refer to it by a unique name. Configurable
items can then refer to that name when specifying access control lists.
It also includes updates to all core supported consumers of ACLs. That includes
manager, chan_sip, and chan_iax2. This feature is based on the deluxepine-trunk
by Olle E. Johansson and provides a subset of the Named ACL functionality
implemented in that branch. For more information on this feature, see acl.conf
and/or the Asterisk wiki.
Review: https://reviewboard.asterisk.org/r/1978/
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@369959 65c4cc65-6c06-0410-ace0-fbb531ad65f3
Asterisk now generates image stream declinations with the same
transport case that it used to before the stream declination
improvements. (udptl vs UDPTL)
(closes issue SWP-4736)
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@369900 65c4cc65-6c06-0410-ace0-fbb531ad65f3
Commits r369557 and r369579 were done to improve handling of re-INVITEs
when the UA that was supposed to receive the re-INVITE fails to respond.
A limitation of those patches occurred when a UA sent a provisional
response to the re-INVITE. This triggered a sending of a BYE in
check_pending. This patch tweaks the handling of the re-INVITE such that
a BYE is not sent in response to those messages.
(issue ASTERISK-19992)
Reported by: Steve Davies
Tested by: Steve Davies
patches:
(reinvite_tweak.diff license #5012 by Steve Davies)
........
Merged revisions 369626 from http://svn.asterisk.org/svn/asterisk/branches/1.8
........
Merged revisions 369627 from http://svn.asterisk.org/svn/asterisk/branches/10
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@369628 65c4cc65-6c06-0410-ace0-fbb531ad65f3
The basic problem is that if a re-INVITE is sent by Asterisk and it receives a
provisional response, but no final response, then the dialog is never torn
down. In addition to leaking memory, this also leaks file descriptors and will
eventually lead to Asterisk no longer being able to process calls.
This patch just keeps track of whether there is an outstanding re-INVITE, and if
there is goes ahead and cleans up everything as though there was no outstanding
reinvite.
Review: https://reviewboard.asterisk.org/r/2009/
(closes issue ASTERISK-19992)
Reported by: Steve Davies
Tested by: Steve Davies, Terry Wilson
........
Merged revisions 369436 from http://svn.asterisk.org/svn/asterisk/branches/1.8
........
Merged revisions 369437 from http://svn.asterisk.org/svn/asterisk/branches/10
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@369449 65c4cc65-6c06-0410-ace0-fbb531ad65f3
When Asterisk receives an INVITE from an external domain when allowexternaldomains=no
send a 403 instead of a 404. This is consistent with Asterisk's behavior when receiving
a REGISTER in this situation.
(Closes issue ASTERISK-19601)
Reported by Matthew Jordan
Patches:
ASTERISK-19601-no401.patch uploaded by Mark Michelson (License #5049)
........
Merged revisions 369302 from http://svn.asterisk.org/svn/asterisk/branches/1.8
........
Merged revisions 369303 from http://svn.asterisk.org/svn/asterisk/branches/10
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@369304 65c4cc65-6c06-0410-ace0-fbb531ad65f3
The sendonly/recvonly/sendrecv/inactive media stream attributes were
parsed for video, but nothing was ever done with them. With this code
removed, an UNSUPPORTED message is produced when these attributes are
used in conjunction with a video stream which is the better behavior
since they were never really supported in the first place.
........
Merged revisions 369195 from http://svn.asterisk.org/svn/asterisk/branches/1.8
........
Merged revisions 369206 from http://svn.asterisk.org/svn/asterisk/branches/10
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@369207 65c4cc65-6c06-0410-ace0-fbb531ad65f3
Asterisk was incorrectly setting the destination of CANCELs
and ACKs for error responses to the URI of the initial INVITE.
This resulted in further requests, such as INVITEs with authentication
credentials, to be routed incorrectly. Instead, when these CANCEL
or ACKs are to be sent, we should simply keep the destination the
same as what it previously was. There is no need to alter it any.
(closes issue ASTERISK-20008)
Reported by Marcus Hunger
Patches:
ASTERISK-20008.patch uploaded by Mark Michelson (license #5049)
........
Merged revisions 369066 from http://svn.asterisk.org/svn/asterisk/branches/1.8
........
Merged revisions 369067 from http://svn.asterisk.org/svn/asterisk/branches/10
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@369068 65c4cc65-6c06-0410-ace0-fbb531ad65f3
This change replaces the static array of four representable media
streams with an AST_LIST so that chan_sip can keep track of offered
media streams. This allows chan_sip to deal with offers containing
multiple same-type streams and many other situations without rejecting
the SDP offer in its entirety, yet still generating a valid response.
This also covers cases where Asterisk can not comprehend the offer if
it is in the correct format.
Previously, chan_sip would reject SDP offers or entirely ignore
individual stream offers in an effort to be more compatible which
would often result in invalid SDP responses.
Review: https://reviewboard.asterisk.org/r/1988/
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@369028 65c4cc65-6c06-0410-ace0-fbb531ad65f3
On incoming calls, we were setting the cid_tag on the dialog only if there was
no remote party information (Remote-Party-ID or P-Asserted-Identity) present.
The Caller ID tag is an invented parameter, though, and should be set no matter
the circumstance.
(closes issue ASTERISK-19859)
Reported by Thomas Arimont
(closes issue AST-884)
Reported by Trey Blancher
........
Merged revisions 368807 from http://svn.asterisk.org/svn/asterisk/branches/1.8
........
Merged revisions 368808 from http://svn.asterisk.org/svn/asterisk/branches/10
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@368809 65c4cc65-6c06-0410-ace0-fbb531ad65f3
In r367163, "send to voicemail" functionality was added to the SIP channel
driver. This required updating the party redirecting information for the
channel based on the headers provided in the REFER request. When the
redirecting party information is updated on the channel, a call to
ast_indicate_data occurs. Because handle_request_refer still had the sip_pvt
locked, a deadlock could occur between the pbx_thread and the do_monitor thread
servicing the REFER request.
This patch preserves the proper locking order between the channel and the
sip_pvt by ensuring that the sip_pvt is unlocked prior to updating the party
redirecting information on the channel.
(closes issue AST-903)
Reported by: Matt Jordan
patches:
jira_ast_903_trunk.patch by rmudgett (license 5621)
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@368793 65c4cc65-6c06-0410-ace0-fbb531ad65f3
ANI2 information is now parsed out of SIP From headers when present in
the oli, isup-oli, and ss7-oli parameters and is available via the
CALLERID(ani2) dialplan function.
(closes issue ASTERISK-19912)
Patch-by: Rob Gagnon
Review: https://reviewboard.asterisk.org/r/1947/
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@368784 65c4cc65-6c06-0410-ace0-fbb531ad65f3
If a dialog-starting INVITE contains a to-tag, then Asterisk
will respond with a 481. In this case, the resulting incoming
ACK would not be matched, so Asterisk would continue retransmitting
the 481 until the transaction times out.
There were two issues. Asterisk, upon creating a sip_pvt would generate
a local tag. However, when the time came to transmit the 481, since there
was a to-tag in the INVITE, Asterisk would place this original to-tag
in the 481 response. When the ACK came in, Asterisk would attempt to
match the to-tag in the ACK to the generated local tag. Unfortunately,
Asterisk never actually transmitted a response with the generated local
tag, so the to-tag in the ACK would not match.
The other problem was that when the 481 was sent, nothing was set
on the sip_pvt to indicate what CSeq is expected in the ACK.
To fix the first problem, we zero out the to-tag seen in the incoming
INVITE. This way, Asterisk, when time to send a response, will send
its generated local tag instead.
To fix the second problem, we set the sip_pvt's pendinginvite to the
CSeq of the INVITE when we send a 481.
(closes issue ASTERISK-19892)
Reported by Mark Michelson
........
Merged revisions 368625 from http://svn.asterisk.org/svn/asterisk/branches/1.8
........
Merged revisions 368629 from http://svn.asterisk.org/svn/asterisk/branches/10
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@368637 65c4cc65-6c06-0410-ace0-fbb531ad65f3
This was essentially duplicated functionality where normal channels used
AST_CAUSE_ANSWERED_ELSEWHERE while local channels and queues used
AST_FLAG_ANSWERED_ELSEWHERE. This removes the flag and converts that usage
into AST_CAUSE_ANSWERED_ELSEWHER usage.
Review: https://reviewboard.asterisk.org/r/1944
(closes issue ASTERISK-19865)
Patch-by: Birger Harzenetter
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@368519 65c4cc65-6c06-0410-ace0-fbb531ad65f3
Revision 351130 broke corect HANGUPCAUSE setting
for the 404 case in chan_sip. Other cases were also
potentially broken. This patch fixes the relaying
of causes to be what they used to be.
(closes issue ASTERISK-19914)
Reported by Pavel Troller
Tested by Walter Doekes (via a reviewboard test to be committed later)
Patches:
chan_sip.diff uploaded by Pavel Troller (license #6302)
........
Merged revisions 368498 from http://svn.asterisk.org/svn/asterisk/branches/1.8
........
Merged revisions 368499 from http://svn.asterisk.org/svn/asterisk/branches/10
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@368500 65c4cc65-6c06-0410-ace0-fbb531ad65f3
Presence support has been added. This is accomplished by
allowing for presence hints in addition to device state
hints. A dialplan function called PRESENCE_STATE has been
added to allow for setting and reading presence. Presence
can be transmitted to Digium phones using custom XML
elements in a PIDF presence document.
Voicemail has new APIs that allow for moving, removing,
forwarding, and playing messages. Messages have had a new
unique message ID added to them so that the APIs will work
reliably. The state of a voicemail mailbox can be obtained
using an API that allows one to get a snapshot of the mailbox.
A voicemail Dialplan App called VoiceMailPlayMsg has been
added to be able to play back a specific message.
Configuration hooks have been added. Configuration hooks
allow for a piece of code to be executed when a specific
configuration file is loaded by a specific module. This is
useful for modules that are dependent on the configuration
of other modules.
chan_sip now has a public method that allows for a custom
SIP INFO request to be sent mid-dialog. Digium phones use
this in order to display progress bars when files are played.
Messaging support has been expanded a bit. The main
visible difference is the addition of an AMI action
MessageSend.
Finally, a ParkingLots manager action has been added in order
to get a list of parking lots.
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@368435 65c4cc65-6c06-0410-ace0-fbb531ad65f3
Asterisk should not accept SDP offers that contain unknown RTP profiles (for
audio/video streams) or unknown top-level media types. When it does, it answers
with an SDP that does not match the offer properly, and this will nearly
always result in a broken call. This patch causes such offers to be rejected.
Review: https://reviewboard.asterisk.org/r/1811/
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@368269 65c4cc65-6c06-0410-ace0-fbb531ad65f3
* 'Unsupported media type' is only reported when that is in fact the case,
not when a supported media type is included in an 'm' line that has an
invalid format.
* All warning messages related to parsing 'm' lines now include the 'm' line contents.
* (minor bugfix) newline added to port-number-zero warning messages.
* Warning messages improved to use RFC-specified terminology for various items.
* Warnings for offers that include more than one port for a single media type now
include the media type.
Review: https://reviewboard.asterisk.org/r/1811/
........
Merged revisions 368218 from http://svn.asterisk.org/svn/asterisk/branches/1.8
........
Merged revisions 368267 from http://svn.asterisk.org/svn/asterisk/branches/10
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@368268 65c4cc65-6c06-0410-ace0-fbb531ad65f3
When Asterisk servers are set up back-to-back, and
direct media is to be used betweeen endpoints, it is
fairly common for the two Asterisk servers to send
direct media reinvites to each other simultaneously.
This results in 491s and ACKs being exchanged between
the servers. While the media eventually gets set up
properly, the problem is that there can be a noticeable
delay for the streams to stabilize.
This patch adds a new directmedia option called "outgoing".
With this set, an immediate direct media reinvite will only
be sent if the call direction is outgoing. For incoming
dialogs, an immediate direct media reinvite will not be sent,
but further "reactionary" direct media reinvites may be sent.
Review: https://reviewboard.asterisk.org/r/1954
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@368143 65c4cc65-6c06-0410-ace0-fbb531ad65f3
The pvt_sip allowtransfer was not being set to that of the peer's setting.
Therefore, the global allowtransfer setting was being used instead which would
lead to calls not being transfered if the global setting was set to 'no' despite
the setting on the peer being 'yes' and vice versa, calls would be allowed to
transfer even if the peer's setting was 'no' but the global setting was 'yes'.
(Closes issue ASTERISK-19856)
Reported by: Jacek
Tested by: Michael L. Young, Jacek
Patches:
issue-asterisk-19856-branch10-v3.diff uploaded by
Michael L. Young (license 5026)
Review: https://reviewboard.asterisk.org/r/1923/
........
Merged revisions 367730 from http://svn.asterisk.org/svn/asterisk/branches/1.8
........
Merged revisions 367731 from http://svn.asterisk.org/svn/asterisk/branches/10
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@367732 65c4cc65-6c06-0410-ace0-fbb531ad65f3
When remotely bridging calls with directmedia, Asterisk would check
the address of the peers/users holding directmedia ACLs (set via
directmediapermit/directmediadeny) instead of the bridged peer. This
is similar to r366547, but trunk specific and involves changes to
the rtpengine instead of just chan_sip.
(closes issue AST-876)
review: https://reviewboard.asterisk.org/r/1924/
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@367640 65c4cc65-6c06-0410-ace0-fbb531ad65f3
Previously, MWI logic utilized a counter called 'lastmsgssent' to know whether
or not MWI NOTIFY requests had been sent to a specific peer. When MWI
notifications were changed to use the internal event framework, this value was
no longer needed for its original purpose. Hence, it was no longer updated
with the new/old message counts for a peer. The value was previously removed
for Asterisk 10; however, since it was still present in Asterisk 1.8 and still
useful for reporting purposes, it was decided to re-add the value.
This patch re-adds the 'LastMsgsSent' field in the response to an AMI/CLI 'sip
show peer [peer]' command, and makes it so that the value of lastmsgssent is
updated appropriately. The value should now display the new/old message counts
for a particular peer.
(closes issue ASTERISK-17866)
Reported by: Steve Davies
patches by:
ast-17866-rb1272.patch (License #5041 by irroot)
Modified slightly for this commit
Review: https://reviewboard.asterisk.org/r/1939
........
Merged revisions 367362 from http://svn.asterisk.org/svn/asterisk/branches/1.8
........
Merged revisions 367369 from http://svn.asterisk.org/svn/asterisk/branches/10
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@367376 65c4cc65-6c06-0410-ace0-fbb531ad65f3
This change accommodates two methods by which calls can be directed to
a user's voicemail.
* Incoming calls can be redirected to any user's voicemail.
* Established calls can be blind transferred to any user's voicemail.
Digium phones indicate the desire to direct a call to voicemail by using
a Diversion header with a reason parameter of "send_to_vm".
This patch adds the "send_to_vm" reason as a valid redirecting reason. In
addition, chan_sip.c has been modified to update redirecting information
on the transferred channel by reading a Diversion header on a REFER request.
(closes issue AST-871)
Reported by Malcolm Davenport
Review: https://reviewboard.asterisk.org/r/1925
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@367163 65c4cc65-6c06-0410-ace0-fbb531ad65f3
SSL_CTX structures were allocated but never freed. This was a bigger
issue for clients than servers since new SSL_CTX structures could be
allocated for each connection. Servers, on the other hand, typically
set up a single SSL_CTX for their lifetime.
This is solved in two ways:
1. In __ssl_setup(), if a tcptls_cfg has an ssl_ctx on it, it is
freed so that a new one can take its place.
2. A companion to ast_ssl_setup() called ast_ssl_teardown() has
been added so that servers can properly free their SSL_CTXs.
(issue ASTERISK-19278)
........
Merged revisions 367002 from http://svn.asterisk.org/svn/asterisk/branches/1.8
........
Merged revisions 367003 from http://svn.asterisk.org/svn/asterisk/branches/10
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@367010 65c4cc65-6c06-0410-ace0-fbb531ad65f3
This patch adds to what was fixed in r366880. Specifically, it addresses the
following:
* chan_sip: dispose of an allocated frame in off nominal code paths in
sip_rtp_read
* func_odbc: when disposing of an allocated resultset, ensure that any rows
that were appended to that resultset are also disposed of
* cli: free the created return string buffer in another off nominal code
path
* chan_dahdi: free a frame that was allocated by the dsp layer if we choose
not to process that frame
(issue ASTERISK-19665)
Reported by: Matt Jordan
Review: https://reviewboard.asterisk.org/r/1922/
........
Merged revisions 366944 from http://svn.asterisk.org/svn/asterisk/branches/1.8
........
Merged revisions 366948 from http://svn.asterisk.org/svn/asterisk/branches/10
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@366955 65c4cc65-6c06-0410-ace0-fbb531ad65f3
This patch addresses a number of memory leaks in a variety of modules that were
found by a static analysis tool. A brief summary of the changes:
* app_minivm: free ast_str objects on off nominal paths
* app_page: free the ast_dial object if the requested channel technology
cannot be appended to the dialing structure
* app_queue: if a penalty rule failed to match any existing rule list
names, the created rule would not be inserted and its memory
would be leaked
* app_read: dispose of the created silence detector in the presence of
off nominal circumstances
* app_voicemail: dispose of an allocated unique ID field for MWI event
un-subscribe requests in off nominal paths; dispose of
configuration objects when using the secret.conf option
* chan_dahdi: dispose of the allocated frame produced by ast_dsp_process
* chan_iax2: properly unref peer in CLI command "iax2 unregister"
* chan_sip: dispose of the allocated frame produced by sip_rtp_read's
call of ast_dsp_process; free memory in parse unit tests
* func_dialgroup: properly deref ao2 object grhead in nominal path of
dialgroup_read
* func_odbc: free resultset in off nominal paths of odbc_read
* cli: free match_list in off nominal paths of CLI match completion
* config: free comment_buffer/list_buffer when configuration file load
is unchanged; free the same buffers any time they were
created and config files were processed
* data: free XML nodes in various places
* enum: free context buffer in off nominal paths
* features: free ast_call_feature in off nominal paths of applicationmap
config processing
* netsock2: users of ast_sockaddr_resolve pass in an ast_sockaddr struct
that is allocated by the method. Failures in
ast_sockaddr_resolve could result in the users of the method
not knowing whether or not the buffer was allocated. The
method will now not allocate the ast_sockaddr struct if it
will return failure.
* pbx: cleanup hash table traversals in off nominal paths; free
ignore pattern buffer if it already exists for the specified
context
* xmldoc: cleanup various nodes when we no longer need them
* main/editline: various cleanup of pointers not being freed before being
assigned to other memory, cleanup along off nominal paths
* menuselect/mxml: cleanup of value buffer for an attribute when that attribute
did not specify a value
* res_calendar*: responses are allocated via the various *_request method
returns and should not be allocated in the various
write_event methods; ensure attendee buffer is freed if no
data exists in the parsed node; ensure that calendar objects
are de-ref'd appropriately
* res_jabber: free buffer in off nominal path
* res_musiconhold: close the DIR* object in off nominal paths
* res_rtp_asterisk: if we run out of ports, close the rtp socket object and free
the rtp object
* res_srtp: if we fail to create the session in libsrtp, destroy the
temporary ast_srtp object
(issue ASTERISK-19665)
Reported by: Matt Jordan
Review: https://reviewboard.asterisk.org/r/1922
........
Merged revisions 366880 from http://svn.asterisk.org/svn/asterisk/branches/1.8
........
Merged revisions 366881 from http://svn.asterisk.org/svn/asterisk/branches/10
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@366917 65c4cc65-6c06-0410-ace0-fbb531ad65f3
This patch improves the handling of call id logging significantly with regard
to transfers and adding APIs to better handle specific aspects of logging.
Also, changes have been made to chan_sip in order to better handle the creation
of callids and to enable the monitor thread to bind itself to a particular
call id when a dialog is determined to be related to a callid. It then unbinds
itself before returning to normal monitoring.
review: https://reviewboard.asterisk.org/r/1886/
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@366842 65c4cc65-6c06-0410-ace0-fbb531ad65f3
This is the starting point for the Asterisk 11: Who Hung Up work and provides
a framework which will allow channel drivers to report the types of hangup
cause information available in SIP_CAUSE without incurring the overhead of the
MASTER_CHANNEL dialplan function. The initial implementation only includes
cause generation for chan_sip and does not include cause code translation
utilities.
This change deprecates SIP_CAUSE and replaces its method of reporting cause
codes with the new framework. This change also deprecates the 'storesipcause'
option in sip.conf.
Review: https://reviewboard.asterisk.org/r/1822/
(Closes issue SWP-4221)
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@366408 65c4cc65-6c06-0410-ace0-fbb531ad65f3
To make a long story short, reinvite glares were broken
because Asterisk would invert the To and From headers
when ACKing a 491 response.
The reason was because the initreq of the dialog was being
changed to the incoming glared reinvite instead of being
set to the outgoing glared reinvite. This change has three
parts
* In handle_incoming, we never will reject an ACK because it
has a to-tag present, even if we think the request may be out
of dialog.
* In handle_request_invite, we do not change the initreq when
receiving a reinvite to which we will respond with a 491.
* In handle_request_invite, several superflous settings up
pendinginvite have been removed since this is dones automatically
by transmit_response_reliable
Review: https://reviewboard.asterisk.org/r/1911
........
Merged revisions 366389 from http://svn.asterisk.org/svn/asterisk/branches/1.8
........
Merged revisions 366390 from http://svn.asterisk.org/svn/asterisk/branches/10
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@366401 65c4cc65-6c06-0410-ace0-fbb531ad65f3
This resolves core findings from ASTERISK-19650 numbers 0-2, 6, 7, 9-11, 14-20,
22-24, 28, 30-32, 34-36, 42-56, 82-84, 87, 89-90, 93-102, 104, 105, 109-111,
and 115. Finding numbers 26, 33, and 29 were already resolved. Those skipped
were either extended/deprecated or in areas of code that shouldn't be
disturbed.
(Closes issue ASTERISK-19650)
........
Merged revisions 366167 from http://svn.asterisk.org/svn/asterisk/branches/1.8
........
Merged revisions 366168 from http://svn.asterisk.org/svn/asterisk/branches/10
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@366169 65c4cc65-6c06-0410-ace0-fbb531ad65f3
chan_sip was coded under the assumption that a SIP dialog with an owner channel
will always be destroyed after the owner channel has been hung up.
However, there are situations where the SIP dialog can time out and auto destruct
before the corresponding channel has hung up. A typical example of this would be
if the 'h' extension in the dialplan takes a long time to complete. In such cases,
__sip_autodestruct() would complain about the dialog being auto destroyed with
an owner channel still in place. The problem is that even once the owner channel
was hung up, the sip_pvt would still be linked in its ao2_container because nothing
would ever unlink it.
The fix for this is that if __sip_autodestruct() is called for a sip_pvt that still
has an owner channel in place, the destruction is rescheduled for 10 seconds in the
future. This will continue until the owner channel is finally hung up.
(closes issue ASTERISK-19425)
reported by David Cunningham
Patches:
ASTERISK-19425.patch uploaded by Mark Michelson (License #5049)
(closes issue ASTERISK-19455)
reported by Dean Vesvuio
Tested by Dean Vesvuio
........
Merged revisions 365896 from http://svn.asterisk.org/svn/asterisk/branches/1.8
........
Merged revisions 365898 from http://svn.asterisk.org/svn/asterisk/branches/10
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@365913 65c4cc65-6c06-0410-ace0-fbb531ad65f3
This uses the calling channel's caller ID and connected line information
to populate the remote and local identities in the dialog-info NOTIFY when
an extension is ringing.
There is a bit of an oddity here, and that is that we seed the remote target
with the To header of the outbound call rather than the from header. This
is because it was reported that seeding with the from header caused hints
to be broken with certain SNOM devices. A comment has been added to the code
to explain this.
(closes issue ASTERISK-16735)
reported by Maciej Krajewski
patches:
local_remote_hint2.diff uploaded by Mark Michelson (license #5049)
16735_tweak1.diff uploaded by Mark Michelson (license #5049)
Tested by Niccolo Belli
........
Merged revisions 365574 from http://svn.asterisk.org/svn/asterisk/branches/1.8
........
Merged revisions 365575 from http://svn.asterisk.org/svn/asterisk/branches/10
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@365576 65c4cc65-6c06-0410-ace0-fbb531ad65f3
Most of the changes here are trivial NULL checks. There are a couple
optimizations to remove the need to check for NULL and outboundproxy parsing
in chan_sip.c was rewritten to avoid use of strtok. Additionally, a bug was
found and fixed with the parsing of outboundproxy when "outboundproxy=," was
set.
(Closes issue ASTERISK-19654)
........
Merged revisions 365398 from http://svn.asterisk.org/svn/asterisk/branches/1.8
........
Merged revisions 365399 from http://svn.asterisk.org/svn/asterisk/branches/10
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@365400 65c4cc65-6c06-0410-ace0-fbb531ad65f3
The reason I'm removing this is that Coverity reported a STRAY_SEMICOLON
issue here. Since the function has been unused for so long, I just elected
to remove it altogether.
(closes issue ASTERISK-19660)
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@364915 65c4cc65-6c06-0410-ace0-fbb531ad65f3
Revision 360862 was intended to improve identities sent in dialog-info
NOTIFY requests. Some users reported that hint became broken once this
was done. It's not clear exactly what part of the patch has caused this
regression, but broken hints are bad.
For now, this revision is being reverted so that the next releases of
Asterisk do not have bad behavior in them. The original reported issue
will have to be fixed differently in the next version of Asterisk.
(issue ASTERISK-16735)
........
Merged revisions 364706 from http://svn.asterisk.org/svn/asterisk/branches/1.8
........
Merged revisions 364707 from http://svn.asterisk.org/svn/asterisk/branches/10
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@364708 65c4cc65-6c06-0410-ace0-fbb531ad65f3
If enabled using the keepalive option in sip.conf a small packet will be sent
at a regular interval to keep the NAT mapping open. This is lightweight as the
remote side does not need to parse and handle a SIP message.
(closes issue AST-783)
Review: https://reviewboard.asterisk.org/r/1756/
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@364500 65c4cc65-6c06-0410-ace0-fbb531ad65f3
Unref the SIP pvt stored in the refer structure as soon as it is no longer
needed so that the pvt and associated file descriptors can be freed sooner.
This change makes a reference decrement unnecessary in code that handles SIP
BYE/Also transfers which should not touch the reference anyway.
(Closes issue ASTERISK-19579)
Reported by: Maciej Krajewski
Tested by: Maciej Krajewski
........
Merged revisions 364258 from http://svn.asterisk.org/svn/asterisk/branches/1.8
........
Merged revisions 364259 from http://svn.asterisk.org/svn/asterisk/branches/10
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@364260 65c4cc65-6c06-0410-ace0-fbb531ad65f3
As a continuation of the patch in r356604, which allowed for the
reloading of SRTP keys in re-INVITE transfer scenarios, this patch
addresses the more common case where a new key is requested within
the context of a current SIP dialog. This can occur, for example, when
certain phones request a SIP hold.
Previously, once a dialog was associated with an SRTP object, any
subsequent attempt to process crypto keys in any SDP offer - either
the current one or a new offer in a new SIP request - were ignored. This
patch changes this behavior to only ignore subsequent crypto keys within
the current SDP offer, but allows future SDP offers to change the keys.
(issue ASTERISK-19253)
Reported by: Thomas Arimont
Tested by: Thomas Arimont
Review: https://reviewboard.asteriskorg/r/1885/
........
Merged revisions 364203 from http://svn.asterisk.org/svn/asterisk/branches/1.8
........
Merged revisions 364204 from http://svn.asterisk.org/svn/asterisk/branches/10
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@364205 65c4cc65-6c06-0410-ace0-fbb531ad65f3
The reference held for SIP blind transfers using the Replaces header in an
INVITE was never freed on success and also failed to be freed in some error
conditions. This caused a file descriptor leak since the RTP structures in use
at the time of the transfer were never freed. This reference leak and another
relating to subscriptions in the same code path have now been corrected.
(closes issue ASTERISK-19579)
........
Merged revisions 363986 from http://svn.asterisk.org/svn/asterisk/branches/1.8
........
Merged revisions 363987 from http://svn.asterisk.org/svn/asterisk/branches/10
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@363988 65c4cc65-6c06-0410-ace0-fbb531ad65f3
If Asterisk receives a SIP UPDATE request after a call has been terminated and
the channel has been destroyed but before the SIP dialog has been destroyed, a
condition exists where a connected line update would be attempted on a
non-existing channel. This would cause Asterisk to crash. The patch resolves
this by first ensuring that the SIP dialog has an owning channel before
attempting a connected line update. If an UPDATE request is received and no
channel is associated with the dialog, a 481 response is sent.
(closes issue ASTERISK-19770)
Reported by: Thomas Arimont
Tested by: Matt Jordan
Patches:
ASTERISK-19278-2012-04-16.diff uploaded by Matt Jordan (license 6283)
........
Merged revisions 363106 from http://svn.asterisk.org/svn/asterisk/branches/1.8
........
Merged revisions 363107 from http://svn.asterisk.org/svn/asterisk/branches/10
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@363108 65c4cc65-6c06-0410-ace0-fbb531ad65f3
When a bind address is set to an ANY address (udpbindport=::), a warning message
is displayed stating that "Address remapping activated in sip.conf but we're
using IPv6, which doesn't need it. Please remove 'localnet' and/or 'externaddr'
settings." But if one is running dual stack, we shouldn't be told to turn those
settings off.
This patch checks if the bind address is an ANY address or not. The warning
message will now only be displayed if the bind address is NOT an ANY address and
IPv6 is being used.
Also, updated the copyright year.
(closes issue ASTERISK-19456)
Reported by: Michael L. Young
Tested by: Michael L. Young
Patches:
chan_sip_ipv6_message.diff uploaded by Michael L. Young (license 5026)
........
Merged revisions 362253 from http://svn.asterisk.org/svn/asterisk/branches/1.8
........
Merged revisions 362264 from http://svn.asterisk.org/svn/asterisk/branches/10
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@362266 65c4cc65-6c06-0410-ace0-fbb531ad65f3
This change makes use of connected party information in addition to caller ID in order
to populate local and remote XML elements in the dialog-info NOTIFYs.
(closes issue ASTERISK-16735)
Reported by: Maciej Krajewski
Tested by: Maciej Krajewski
Patches:
local_remote_hint2.diff uploaded by Mark Michelson (license 5049)
........
Merged revisions 360862 from http://svn.asterisk.org/svn/asterisk/branches/1.8
........
Merged revisions 360863 from http://svn.asterisk.org/svn/asterisk/branches/10
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@360872 65c4cc65-6c06-0410-ace0-fbb531ad65f3
When Asterisk detects a hangup and cannot send a BYE due to a pending
INVITE, it sets the pendingbye flag and waits for the final response to that
INVITE. When the response is received, it transmits the BYE. If, however,
that INVITE request is a pending re-INVITE, it needs to first send a CANCEL
request to terminate the pending re-INVITE. In that circumstance, Asterisk
was, in some scenarios, clearing the pendingbye flag after processing the
CANCEL request and not checking for a pending BYE when receiving the final
487 response to the INVITE.
This patch ensures that if the pendingbye flag is set, it is honored
regardless of the nature of the INVITE request currently in flight.
(closes issue ASTERISK-19365)
Reported by: Thomas Arimont
Tested by: Thomas Arimont
Patches:
bugASTERISK-19365_2012_03_08.patch uploaded by mjordan (license 6283)
Review: https://reviewboard.asterisk.org/r/1807
........
Merged revisions 360086 from http://svn.asterisk.org/svn/asterisk/branches/1.8
........
Merged revisions 360088 from http://svn.asterisk.org/svn/asterisk/branches/10
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@360089 65c4cc65-6c06-0410-ace0-fbb531ad65f3
Prior to this patch, Using "transport=" multiple times would cause them to add to one
another like allow/deny. This patch changes that behavior to simply use the transport
option specified last. Also, if no transport option is applied now, the default will
automatically be UDP.
(closes ASTERISK-19352)
Reported by: jamicque
Patches:
asterisk-19352-transport-warning-message-v1.patch uploaded by Michael L. Young (license 5026)
issueA19352_no_transport_is_udp.patch uploaded by Walter Doekes (license 5674)
Review: https://reviewboard.asterisk.org/r/1745/diff/#index_header
........
Merged revisions 357266 from http://svn.asterisk.org/svn/asterisk/branches/1.8
........
Merged revisions 357271 from http://svn.asterisk.org/svn/asterisk/branches/10
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@357288 65c4cc65-6c06-0410-ace0-fbb531ad65f3
send_diversion=no will prevent Diversion headers from being added to SIP
requests. This doesn't prevent Diversion from being added with dialplan
such as with SIPAddHeader.
(closes issue ASTERISK-16862)
Reported by: rsw686
Review: https://reviewboard.asterisk.org/r/1769/
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@356987 65c4cc65-6c06-0410-ace0-fbb531ad65f3
Custom parking extensions may not be coded such that the first and only
extension priority is the Park application. These custom parking
extensions will not be recognized as parking extensions. When a call is
blind transferred to an extension that is not recognized as a parking
extension, the normal blind transfer code causes the transferred channel
to start executing dialplan. Calls that get parked in this manner do not
know the original channel name that parked the call so the original parker
could never be called back if the parked call is not retrieved before the
timeout time. The parking space is also announced to the call being
parked as a side effect of not knowing the original parking channel.
* Fix handling of BLINDTRANSFER channel variable for call parking.
* Fixed SIP blind transfer using the wrong dialplan context variable to
check for the parking extension.
(closes issue ASTERISK-19322)
Reported by: aragon
Tested by: rmudgett, jparker
Review: https://reviewboard.asterisk.org/r/1730/
JIRA AST-766
........
Merged revisions 356521 from http://svn.asterisk.org/svn/asterisk/branches/1.8
........
Merged revisions 356522 from http://svn.asterisk.org/svn/asterisk/branches/10
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@356523 65c4cc65-6c06-0410-ace0-fbb531ad65f3
When we send an ACK for a 2xx response to an INVITE, we are supposed
to use the learned route set. However, when we receive a non-2xx final
response to an INVITE, we are supposed to send the ACK to the same place
we initially sent the INVITE.
We had been doing this up until the changes went in that would build a route
set from provisional responses. That introduced a regression where we would
use the learned route set under all circumstances.
With this change, we now will set the destination of our ACK based on the
invitestate. If it is INV_COMPLETED then that means that we have received
a non-2xx final response (INV_TERMINATED indicates a 2xx response was received).
If it is INV_CANCELLED, then that means the call is being canceled, which
means that we should be ACKing a 487 response.
The other change introduced here is setting the invitestate to INV_CONFIRMED
when we send an ACK *after* the reqprep instead of before. This way, we can
tell in reqprep more easily what the invitestate is prior to sending the ACK.
(closes issue ASTERISK-19389)
reported by Karsten Wemheuer
patches:
ASTERISK-19389v2.patch uploaded by Mark Michelson (license #5049)
(with some slight modifications prior to commit)
........
Merged revisions 356475 from http://svn.asterisk.org/svn/asterisk/branches/1.8
........
Merged revisions 356476 from http://svn.asterisk.org/svn/asterisk/branches/10
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@356477 65c4cc65-6c06-0410-ace0-fbb531ad65f3
https://origsvn.digium.com/svn/asterisk/branches/10
................
r356215 | mjordan | 2012-02-22 08:53:53 -0600 (Wed, 22 Feb 2012) | 32 lines
Merged revisions 356214 via svnmerge from
https://origsvn.digium.com/svn/asterisk/branches/1.8
........
r356214 | mjordan | 2012-02-22 08:50:20 -0600 (Wed, 22 Feb 2012) | 27 lines
Fix potential buffer overrun and memory leak when executing "sip show peers"
The "sip show peers" command uses a fix sized array to sort the current peers
in the peers ao2_container. The size of the array is based on the current
number of peers in the container. However, once the size of the array is
determined, the number of peers in the container can change, as the peers
container is not locked. This could cause a buffer overrun when populating
the array, if peers were added to the container after the array was created.
Additionally, a memory leak of the allocated array would occur if a user
caused the _show_peers method to return CLI_SHOWUSAGE.
We now create a snapshot of the current peers using an ao2_callback with the
OBJ_MULTIPLE flag. This size of the array is set to the number of peers
that the iterator will iterate over; hence, if peers are added or removed
from the peers container it will not affect the execution of the "sip show
peers" command.
Review: https://reviewboard.asterisk.org/r/1738/
(closes issue ASTERISK-19231)
(closes issue ASTERISK-19361)
Reported by: Thomas Arimont, Jamuel Starkey
Tested by: Thomas Arimont, Jamuel Starkey
Patches: sip_show_peers_2012_02_16.diff uploaded by mjordan (license 6283)
........
................
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@356216 65c4cc65-6c06-0410-ace0-fbb531ad65f3
This fixes two main issues:
1. Asterisk would send a CANCEL to the route created by the provisional response
instead of using the same destination it did in the initial INVITE.
2. If a new route set arrives in a 200 OK than was in the 1XX response (perfectly
possible if our outbound INVITE gets forked), then the route set in the 200 OK
needs to overwrite the route set in the 1XX response.
(closes issue ASTERISK-19358)
Reported by: Karsten Wemheuer
Tested by: Karsten Wemheuer
patches:
ASTERISK-19358.patch uploaded by Mark Michelson (license 5049)
ASTERISK-19358.patch uploaded by Stefan Schmidt (license 6034)
Review: https://reviewboard.asterisk.org/r/1749
........
Merged revisions 355732 from http://svn.asterisk.org/svn/asterisk/branches/1.8
........
Merged revisions 355733 from http://svn.asterisk.org/svn/asterisk/branches/10
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@355745 65c4cc65-6c06-0410-ace0-fbb531ad65f3
This patch adds the auto_force_rport and auto_comedia NAT options. It
also converts the nat= setting to a list of comma-separated combinable
options: no, force_rport, comedia, auto_force_rport, and auto_comedia.
nat=yes remains as an undocumented option equal to
"force_rport,comedia". The first instance of 'yes' or 'no' in the list
stops parsing and overrides any previously set options. If an auto_*
option is specified with its non-auto_ counterpart, the auto setting
takes precedence.
This patch builds upon the patch posted to ASTERISK-17860 by JIRA user
pedro-garcia.
(closes issue ASTERISK-17860)
Review: https://reviewboard.asterisk.org/r/1698/
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@354597 65c4cc65-6c06-0410-ace0-fbb531ad65f3
In ASTERISK-18924, SIP INFO DTMF handlingw as changed to account for both
lowercase alphatbetic DTMF events, as well as uppercase alphabetic DTMF
events. When this occurred, the comparison of the character buffer containing
the event code was changed such that the buffer was first compared again '0'
and '9' to determine if it was numeric. Unfortunately, since the first
character in the buffer will typically be '1' in the case of non-numeric
event codes (10-16), this caused those codes to be converted to a DTMF event
of '1'. This patch fixes that, and cleans up handling of both
application/dtmf-relay and application/dtmf content types.
Review: https://reviewboard.asterisk.org/r/1722/
(closes issue ASTERISK-19290)
Reported by: Ira Emus
Tested by: mjordan
........
Merged revisions 354542 from http://svn.asterisk.org/svn/asterisk/branches/1.8
........
Merged revisions 354543 from http://svn.asterisk.org/svn/asterisk/branches/10
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@354544 65c4cc65-6c06-0410-ace0-fbb531ad65f3
This patch is based on the one by David Vossel, developer extrodinaire, at
https://reviewboard.asterisk.org/r/344/. If multiple peers are defined with the
same host/port, but differing callbackextensions, it chooses the peer with the
matching callbackextension. Since callbackextension creates an outbound
registration with the callbackextension as the Contact address, matching an
incoming request by that (in addition to the host/port) makes a lot of sense.
This patch also adds support for callbackextension to realtime by querying all
peers with callbackextensions on reload and adding registrations for them.
(closes issue ASTERISK-13456)
Review: https://reviewboard.asterisk.org/r/344/
Review: https://reviewboard.asterisk.org/r/1717/
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@354458 65c4cc65-6c06-0410-ace0-fbb531ad65f3
After R340970 Asterisk was still polling the RTCP file descriptor after RTCP is
shut down and removed. If the descriptor happened to have data ready when the
removal occured then Asterisk would go into an infinite loop trying to read
data that it can never actually access. This change disables the audio RTCP
file descriptor for the duration of the T.38 transaction.
(closes issue ASTERISK-18951)
Reported-by: Kristijan Vrban
........
Merged revisions 353915 from http://svn.asterisk.org/svn/asterisk/branches/1.8
........
Merged revisions 353916 from http://svn.asterisk.org/svn/asterisk/branches/10
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@353917 65c4cc65-6c06-0410-ace0-fbb531ad65f3
A previous patch I committed from ASTERISK-16930 unexpectedly changed some output for
the AMI action "sippeers" which this patch changes back. Also, this aligns the output
for the cli command "sip show peers" and fixes another issue that patch introduced by
using ast_sockaddr_stringify calls multiple times without immediately using the pointer.
I also went ahead and did a little janitorial work to clean up whitespace in
_sip_show_peers.
(issue ASTERISK-16930)
(closes issue ASTERISK-19281)
Reported by: Patrick El Youssef
Patches:
ASTERISK-19281.diff uploaded by Walter Doekes (license 5674)
........
Merged revisions 353769 from http://svn.asterisk.org/svn/asterisk/branches/1.8
........
Merged revisions 353771 from http://svn.asterisk.org/svn/asterisk/branches/10
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@353772 65c4cc65-6c06-0410-ace0-fbb531ad65f3
There are a number of cleaner looking wrappers for ast_sockaddr_stringify_fmt
available which are slightly more readable than using a direct call to
ast_sockaddr_stringify_fmt. This patch switches a number of those calls in
chan_sip to use those wrappers and is generally harmless.
(Closes issue ASTERISK-16930)
Reported by: Michael L. Young
Patches:
chan_sip-broken-registration-1.8.diff uploaded by Michael L. Young (license 5026)
........
Merged revisions 353720 from http://svn.asterisk.org/svn/asterisk/branches/1.8
........
Merged revisions 353721 from http://svn.asterisk.org/svn/asterisk/branches/10
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@353725 65c4cc65-6c06-0410-ace0-fbb531ad65f3
Asterisk's dnsmgr currently takes a pointer to an ast_sockaddr and updates it
anytime an address resolves to something different. There are a couple of
issues with this. First, the ast_sockaddr is usually the address of an
ast_sockaddr inside a refcounted struct and we never bump the refcount of those
structs when using dnsmgr. This makes it possible that a refresh could happen
after the destructor for that object is called (despite ast_dnsmgr_release
being called in that destructor). Second, the module using dnsmgr cannot be
aware of an address changing without polling for it in the code. If an action
needs to be taken on address update (like re-linking a SIP peer in the
peers_by_ip table), then polling for this change negates many of the benefits
of having dnsmgr in the first place.
This patch adds a function to the dnsmgr API that calls an update callback
instead of blindly updating the address itself. It also moves calls to
ast_dnsmgr_release outside of the destructor functions and into cleanup
functions that are called when we no longer need the objects and increments the
refcount of the objects using dnsmgr since those objects are stored on the
ast_dnsmgr_entry struct. A helper function for returning the proper default SIP
port (non-tls vs tls) is also added and used.
This patch also incorporates changes from a patch posted by Timo Teräs to
ASTERISK-19106 for related dnsmgr issues.
(closes issue ASTERISK-19106)
Review: https://reviewboard.asterisk.org/r/1691/
........
Merged revisions 353371 from http://svn.asterisk.org/svn/asterisk/branches/1.8
........
Merged revisions 353397 from http://svn.asterisk.org/svn/asterisk/branches/10
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@353418 65c4cc65-6c06-0410-ace0-fbb531ad65f3
https://origsvn.digium.com/svn/asterisk/branches/10
................
r353321 | alecdavis | 2012-01-31 11:16:22 +1300 (Tue, 31 Jan 2012) | 25 lines
Merged revisions 353320 via svnmerge from
https://origsvn.digium.com/svn/asterisk/branches/1.8
........
r353320 | alecdavis | 2012-01-31 10:57:49 +1300 (Tue, 31 Jan 2012) | 18 lines
RFC3261 Section 8.1.1.5. The sequence number value MUST be expressible as a 32-bit unsigned integer
* fix: use %u instead of %d when dealing with CSeq numbers - to remove possibility of -ve numbers.
* fix: change all uses of seqno and friends (ocseq icseq) from 'int' or 'unsigned int' to uint32_t.
Summary of CSeq numbers.
An initial CSeq number must be less than 2^31
A CSeq number can increase in value up to 2^32-1
An incrementing CSeq number must not wrap around to 0.
Tested with Asterisk 1.8.8.2 with Grandstream phones.
alecdavis (license 585)
Tested by: alecdavis
Review: https://reviewboard.asterisk.org/r/1699/
........
................
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@353347 65c4cc65-6c06-0410-ace0-fbb531ad65f3
Previously, if an m-line in an SDP offer or answer had a port number of zero,
that line was skipped, and resulted in an 'Unsupported SDP media type...'
warning message. This was misleading, as the media type was not unsupported,
but was ignored because the m-line indicated that the media stream had been
rejected (in an answer) or was not going to be used (in an offer).
........
Merged revisions 353260 from http://svn.asterisk.org/svn/asterisk/branches/1.8
........
Merged revisions 353261 from http://svn.asterisk.org/svn/asterisk/branches/10
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@353262 65c4cc65-6c06-0410-ace0-fbb531ad65f3
Michael L. Young
Mark Michelson
Jonathan Rose
Joshua Colp
David M. Lee
Kinsey Moore
Richard Mudgett
Kevin Harwell
Matthew Jordan
Walter Doekes
Jason Parker
Sean Bright
Alec L Davis
Brent Eagles
Olle Johansson
Pedro Kiefer
Andrew Latham
Terry Wilson
Darren Sessions
Kevin P. Fleming
Paul Belanger