When a realtime peer is built it can cause a locking inversion when the
just built peer is poked. If the CLI command "sip show channels" is
periodically executed then a deadlock can happen because of the locking
inversion.
* Push the peer poke off onto the scheduler thread to avoid the locking
inversion of the just built realtime peer.
AST-1540
ASTERISK-24838 #close
Reported by: Richard Mudgett
Review: https://reviewboard.asterisk.org/r/4454/
........
Merged revisions 432526 from http://svn.asterisk.org/svn/asterisk/branches/11
git-svn-id: https://origsvn.digium.com/svn/asterisk/branches/13@432528 65c4cc65-6c06-0410-ace0-fbb531ad65f3
When Asterisk fails to start a PBX thread for a new channel - for example, when
the maxcalls setting in asterisk.conf is exceeded - we currently send a final
response, and then attempt to send a BYE request to the UA. Since that's all
sorts of wrong, this patch fixes that by setting sipalreadygone on the sip_pvt
such that we don't get stuck sending BYE requests to something that does not
want it.
Note that this patch is a slight modification of the one on ASTERISK-15434.
For clarity, it explicitly calls sipalreadygone with the calls to transmit a
final response.
ASTERISK-21845
ASTERISK-15434 #close
Reported by: Makoto Dei
Tested by: Matt Jordan
patches:
sip-pbxstart-failed.patch uploaded by Makoto Dei (License 5027)
........
Merged revisions 432320 from http://svn.asterisk.org/svn/asterisk/branches/11
git-svn-id: https://origsvn.digium.com/svn/asterisk/branches/13@432321 65c4cc65-6c06-0410-ace0-fbb531ad65f3
When we receive an SDP as part of an offer/answer for a peer/friend has been
configured to require encryption, and that SDP offer/answer failed to provide
acceptable crypto attributes, we currently issue a WARNING that uses the phrase
"we" and "requested". In this case, both of those terms are ambiguous - the
user will probably think "we" is Asterisk (it most likely isn't) and it may
not be a "request", so much as an SDP that was received in some fashion.
This patch makes the WARNING messages slightly less bad and a bit more
accurate as well.
ASTERISK-23214 #close
Reported by: Rusty Newton
........
Merged revisions 432277 from http://svn.asterisk.org/svn/asterisk/branches/11
git-svn-id: https://origsvn.digium.com/svn/asterisk/branches/13@432278 65c4cc65-6c06-0410-ace0-fbb531ad65f3
When the monitor thread is stopped, its pthread ID is set to a specific value
(AST_PTHREADT_STOP) so that later portions of the code can determine whether
or not it is safe to manipulate the thread. Unfortunately, __sip_reliable_xmit
failed to check for that value, checking instead only for AST_PTHREAD_STOP.
Passing the invalid yet very specific value to pthread_kill causes a crash.
This patch adds a check for AST_PTHREADT_STOP in __sip_reliable_xmit such that
it doesn't attempt to poke the thread if the thread has already been stopped.
ASTERISK-24800 #close
Reported by: JoshE
........
Merged revisions 432198 from http://svn.asterisk.org/svn/asterisk/branches/11
git-svn-id: https://origsvn.digium.com/svn/asterisk/branches/13@432199 65c4cc65-6c06-0410-ace0-fbb531ad65f3
There are three CLI commands to stop and restart Asterisk each.
1) core stop/restart now - Hangup all calls and stop or restart Asterisk.
New channels are prevented while the shutdown request is pending.
2) core stop/restart gracefully - Stop or restart Asterisk when there are
no calls remaining in the system. New channels are prevented while the
shutdown request is pending.
3) core stop/restart when convenient - Stop or restart Asterisk when there
are no calls in the system. New calls are not prevented while the
shutdown request is pending.
ARI has made stopping/restarting Asterisk more problematic. While a
shutdown request is pending it is desirable to continue to process ARI
HTTP requests for current calls. To handle the current calls while a
shutdown request is pending, a new committed to shutdown phase is needed
so ARI applications can deal with the calls until the system is fully
committed to shutdown.
* Added a new shutdown committed phase so ARI applications can deal with
calls until the final committed to shutdown phase is reached.
* Made refuse new HTTP requests when the system has reached the final
system shutdown phase. Starting anything while the system is actively
releasing resources and unloading modules is not a good thing.
* Split the bridging framework shutdown to not cleanup the global bridging
containers when shutting down in a hurry. This is similar to how other
modules prevent crashes on rapid system shutdown.
* Moved ast_begin_shutdown(), ast_cancel_shutdown(), and
ast_shutting_down(). You should not have to include channel.h just to
access these system functions.
ASTERISK-24752 #close
Reported by: Matthew Jordan
Review: https://reviewboard.asterisk.org/r/4399/
git-svn-id: https://origsvn.digium.com/svn/asterisk/branches/13@431692 65c4cc65-6c06-0410-ace0-fbb531ad65f3
When a SIP device that has its registration stored in RealTime unregisters,
the entry for that device is updated with blank values, i.e., "", indicating
that it is no longer registered. Unfortunately, one of those values that is
'blanked' is the device's port. If the column type for the port is not a
string datatype (the recommended type is integer), an ODBC or database error
will be thrown. MariaDB does not coerce empty strings to a valid integer value.
This patch updates the query run from chan_sip such that it replaces the port
value with a value of '0', as opposed to a blank value. This is the value that
other database backends coerce the empty string ("") to already, and the
handling of reading a RealTime registration value from a backend already
anticipates receiving a port of '0' from the backends.
ASTERISK-24772 #close
Reported by: Richard Miller
patches:
chan_sip.diff uploaded by Richard Miller (License 5685)
........
Merged revisions 431673 from http://svn.asterisk.org/svn/asterisk/branches/11
git-svn-id: https://origsvn.digium.com/svn/asterisk/branches/13@431674 65c4cc65-6c06-0410-ace0-fbb531ad65f3
RFC 3261 sections 8.1.1.8 and 12.1.1 dictate specific
scenarios when we are required to use SIPS URIs in Contact
headers. Asterisk's non-compliance with this could actually
cause calls to get dropped when communicating with clients
that are strict about checking the Contact header.
Both of the SIP stacks in Asterisk suffered from this issue.
This changeset corrects the behavior in chan_sip.
ASTERISK-24646 #close
Reported by Stephan Eisvogel
Review: https://reviewboard.asterisk.org/r/4346
........
Merged revisions 431423 from http://svn.asterisk.org/svn/asterisk/branches/11
git-svn-id: https://origsvn.digium.com/svn/asterisk/branches/13@431424 65c4cc65-6c06-0410-ace0-fbb531ad65f3
When refreshing (with a small expiration) a registration that was sent to
chan_sip the nonce would be considered stale and reject the registration.
What was happening was that the initial registration's "dialog" still existed
in the dialogs container and upon refresh the dialog match algorithm would
choose that as the "dialog" instead of the newly created one. This occurred
because the algorithm did not check to see if the from tag matched if
authentication info was available after the 401. So, it ended up assuming
the original "dialog" was a match and stopped the search. The old "dialog"
of course had an old nonce, thus the stale nonce message.
This fix attempts to leave the original functionality alone except in the case
of a REGISTER. If a REGISTER is received if searches for an existing "dialog"
matching only on the callid. If the expires value is low enough it will reuse
dialog that is there, otherwise it will create a new one.
ASTERISK-24715 #close
Reported by: John Bigelow
Review: https://reviewboard.asterisk.org/r/4367/
........
Merged revisions 431187 from http://svn.asterisk.org/svn/asterisk/branches/11
git-svn-id: https://origsvn.digium.com/svn/asterisk/branches/13@431194 65c4cc65-6c06-0410-ace0-fbb531ad65f3
When the SIP registrations were migrated to using ao2 in what was then trunk,
the explicit destruction of the registrations on module reload was removed and
not replaced with an ao2 equivalent. Debugging done by Stefan Engström, the
issue reporter, on ASTERISK-24673 confirmed that the reference in the
registry_list container was being leaked.
Since the purpose of cleanup_all_regs is to prep a registration for
destruction, this function now calls an ao2_callback function callback with the
OBJ_MULTIPLE | OBJ_NODATA | OBJ_UNLINK flags used to remove the registrations.
This cleans up each registration, and also removes it from the registration
container registry_list.
Review: https://reviewboard.asterisk.org/r/4355/
ASTERISK-24640 #close
Reported by: Max Man
ASTERISK-24673 #close
Reported by: Stefan Engström
Tested by: Stefan Engström
git-svn-id: https://origsvn.digium.com/svn/asterisk/branches/13@430864 65c4cc65-6c06-0410-ace0-fbb531ad65f3
* Made the following AMI actions use list API calls for consistency:
Agents
BridgeInfo
BridgeList
BridgeTechnologyList
ConfbridgeLIst
ConfbridgeLIstRooms
CoreShowChannels
DAHDIShowChannels
DBGet
DeviceStateList
ExtensionStateList
FAXSessions
Hangup
IAXpeerlist
IAXpeers
IAXregistry
MeetmeList
MeetmeListRooms
MWIGet
ParkedCalls
Parkinglots
PJSIPShowEndpoint
PJSIPShowEndpoints
PJSIPShowRegistrationsInbound
PJSIPShowRegistrationsOutbound
PJSIPShowResourceLists
PJSIPShowSubscriptionsInbound
PJSIPShowSubscriptionsOutbound
PresenceStateList
PRIShowSpans
QueueStatus
QueueSummary
ShowDialPlan
SIPpeers
SIPpeerstatus
SIPshowregistry
SKINNYdevices
SKINNYlines
Status
VoicemailUsersList
* Incremented the AMI version to 2.7.0.
* Changed astman_send_listack() to not use the listflag parameter and
always set the value to "Start" so the start capitalization is consistent.
i.e., The FAXSessions used "Start" while the rest of the system used
"start". The corresponding complete event always used "Complete".
* Fixed ami_show_resource_lists() "PJSIPShowResourceLists" to output the
AMI ActionID for all of its list events.
* Fixed off-nominal AMI protocol error in manager_bridge_info(),
manager_parking_status_single_lot(), and
manager_parking_status_all_lots(). Use of astman_send_error() after
responding to the original AMI action request violates the action response
pattern by sending two responses.
* Fixed minor protocol error in action_getconfig() when no requested
categories are found. Each line needs to be formatted as "Header: text".
* Fixed off-nominal memory leak in manager_build_parked_call_string().
* Eliminated unnecessary use of RAII_VAR() in ami_subscription_detail().
ASTERISK-24049 #close
Reported by: Jonathan Rose
Review: https://reviewboard.asterisk.org/r/4315/
git-svn-id: https://origsvn.digium.com/svn/asterisk/branches/13@430434 65c4cc65-6c06-0410-ace0-fbb531ad65f3
Given the following scenario:
* Three SIP phones (A, B, C), all communicating via a proxy with Asterisk
* A call is established between A and B. B performs a SIP attended transfer of
A to C. B sets the call on hold (A is hearing MOH) and dials the extension of
C. While phone C is ringing, B transfers the call (that is, what we typically
call a 'blond transfer').
* When the transfer completes, A hears the ringing of phone C, while B is idle.
In the SIP messaging for the above scenario, a REFER request is sent to
transfer the call. When "sendrpid=yes" is set in sip.conf, Asterisk may send an
UPDATE request to phone C to update party information. This update is sent
directly to phone C, not through the intervening proxy. This has the unfortunate
side effect of providing route information, which is then set on the sip_pvt
structure for C. If someone (e.g. B) is trying to get the call back (through a
directed pickup), Asterisk will send a CANCEL request to C. However, since we
have now updated the route set, the CANCEL request will be sent directly to C
and not through the proxy. The phone ignores this CANCEL according to RFC3261
(Section 9.1).
This patch updates reqprep such that the route is not updated if an UPDATE
request is being sent while the INVITE state is INV_PROCEEDING or
INV_EARLY_MEDIA. This ensures that a subsequent CANCEL request is still sent
to the correct location.
Review: https://reviewboard.asterisk.org/r/4279
ASTERISK-24628 #close
Reported by: Karsten Wemheuer
patches:
issue.patch uploaded by Karsten Wemheuer (License 5930)
........
Merged revisions 429982 from http://svn.asterisk.org/svn/asterisk/branches/11
git-svn-id: https://origsvn.digium.com/svn/asterisk/branches/13@429983 65c4cc65-6c06-0410-ace0-fbb531ad65f3
In r413586 (1.8) various casts were added to silence gcc 4.10 warnings.
Those fixes included things like:
-out += sprintf(out, "%%%02X", (unsigned char) *ptr);
+out += sprintf(out, "%%%02X", (unsigned) *ptr);
That works for low ascii characters, but for the high range that yields
e.g. FFFFFFC3 when C3 is expected.
This changeset:
- fixes those casts to use the 'hh' unsigned char modifier instead
- consistently uses %02x instead of %2.2x (or other non-standard usage)
- adds a few 'h' modifiers in various places
- fixes a 'replcaes' typo
- dev/urandon typo (in 13+ patch)
Review: https://reviewboard.asterisk.org/r/4263/
ASTERISK-24619 #close
Reported by: Stefan27 (on IRC)
........
Merged revisions 429673 from http://svn.asterisk.org/svn/asterisk/branches/11
........
Merged revisions 429674 from http://svn.asterisk.org/svn/asterisk/branches/12
git-svn-id: https://origsvn.digium.com/svn/asterisk/branches/13@429675 65c4cc65-6c06-0410-ace0-fbb531ad65f3
Previously when SRTP was enabled on a channel it was not possible
to switch to T.38 as no crypto attributes would be present.
This change makes it so it is now possible. If a T.38 re-invite
comes in SRTP is terminated since in practice you can't encrypt
a UDPTL stream. Now... if we were doing T.38 over RTP (which
does exist) then we'd have a chance but almost nobody does that so
here we are.
ASTERISK-24449 #close
Reported by: Andreas Steinmetz
patches:
udptl-ignore-srtp-v2.patch submitted by Andreas Steinmetz (license 6523)
........
Merged revisions 429632 from http://svn.asterisk.org/svn/asterisk/branches/11
git-svn-id: https://origsvn.digium.com/svn/asterisk/branches/13@429633 65c4cc65-6c06-0410-ace0-fbb531ad65f3
Frames with a payload length of 0 were incorrectly handled in res_http_websocket.
Provided a frame with a payload had been received prior it was possible for a double
free to occur. The realloc operation would succeed (thus freeing the payload) but be
treated as an error. When the session was then torn down the payload would be
freed again causing a crash. The read function now takes this into account.
This change also fixes assumptions made by users of res_http_websocket. There is no
guarantee that a frame received from it will be NULL terminated.
ASTERISK-24472 #close
Reported by: Badalian Vyacheslav
Review: https://reviewboard.asterisk.org/r/4220/
Review: https://reviewboard.asterisk.org/r/4219/
........
Merged revisions 429270 from http://svn.asterisk.org/svn/asterisk/branches/11
........
Merged revisions 429272 from http://svn.asterisk.org/svn/asterisk/branches/12
git-svn-id: https://origsvn.digium.com/svn/asterisk/branches/13@429273 65c4cc65-6c06-0410-ace0-fbb531ad65f3
When endpoints with direct_media enabled, behind a firewall (Asterisk on a
separate network) and were bridged sometimes Asterisk would send the ip
address of the firewall in the sdp to one of the phones in the reinvite
resulting in one way audio. When sending the reinvite Asterisk will retrieve
the media address from the associated rtp instance, but if frames were being
read this can be overwritten with another address (in this case the
firewall's). This patch ensures that Asterisk uses the original device
address when using direct media.
ASTERISK-24563
Reported by: Steve Pitts
Review: https://reviewboard.asterisk.org/r/4216/
........
Merged revisions 429195 from http://svn.asterisk.org/svn/asterisk/branches/12
git-svn-id: https://origsvn.digium.com/svn/asterisk/branches/13@429196 65c4cc65-6c06-0410-ace0-fbb531ad65f3
Prior to this patch, all Stasis subscriptions would receive a dedicated
thread for servicing published messages. In contrast, prior to r400178
(see review https://reviewboard.asterisk.org/r/2881/), the subscriptions
shared a thread pool. It was discovered during some initial work on Stasis
that, for a low subscription count with high message throughput, the
threadpool was not as performant as simply having a dedicated thread per
subscriber.
For situations where a subscriber receives a substantial number of messages
and is always present, the model of having a dedicated thread per subscriber
makes sense. While we still have plenty of subscriptions that would follow
this model, e.g., AMI, CDRs, CEL, etc., there are plenty that also fall into
the following two categories:
* Large number of subscriptions, specifically those tied to endpoints/peers.
* Low number of messages. Some subscriptions exist specifically to coordinate
a single message - the subscription is created, a message is published, the
delivery is synchronized, and the subscription is destroyed.
In both of the latter two cases, creating a dedicated thread is wasteful (and
in the case of a large number of peers/endpoints, harmful). In those cases,
having shared delivery threads is far more performant.
This patch adds the ability of a subscriber to Stasis to choose whether or not
their messages are dispatched on a dedicated thread or on a threadpool. The
threadpool is configurable through stasis.conf.
Review: https://reviewboard.asterisk.org/r/4193
ASTERISK-24533 #close
Reported by: xrobau
Tested by: xrobau
........
Merged revisions 428681 from http://svn.asterisk.org/svn/asterisk/branches/12
git-svn-id: https://origsvn.digium.com/svn/asterisk/branches/13@428687 65c4cc65-6c06-0410-ace0-fbb531ad65f3
The outboundproxy setting is currently ignored when sending OPTIONS requests
as a result of the qualify setting. This means that if an Asterisk server is
unable to send the packet directly to a peer, it is unable to qualify any
non-inbound registered peer (e.g. a peer SIP Trunk).
This patch grabs the outboundproxy information for a peer when a qualify
attempt is being constructed and, if it finds the information, uses it
when sending the OPTIONS request.
Review: https://reviewboard.asterisk.org/r/3948
ASTERISK-24063 #close
Reported by: Damian Ivereigh
patches:
outboundproxy-dai.patch uploaded by Damian Ivereigh (License 6632)
........
Merged revisions 425818 from http://svn.asterisk.org/svn/asterisk/branches/1.8
........
Merged revisions 425819 from http://svn.asterisk.org/svn/asterisk/branches/11
........
Merged revisions 425820 from http://svn.asterisk.org/svn/asterisk/branches/12
git-svn-id: https://origsvn.digium.com/svn/asterisk/branches/13@425821 65c4cc65-6c06-0410-ace0-fbb531ad65f3
Performing a directed call pickup resulted in a deadlock when PJSIP
channels were involved.
A masquerade needs to hold onto the channel locks while it swaps channel
information between the two channels involved in the masquerade. With
PJSIP channels, the fixup routine needed to push a fixup task onto the
PJSIP channel's serializer. Unfortunately, if the serializer was also
processing a task that needed to lock the channel, you get deadlock.
* Added a new control frame that is used to notify the channels that a
masquerade is about to start and when it has completed.
* Added the ability to query taskprocessors if the current thread is the
taskprocessor thread.
* Added the ability to suspend/unsuspend the PJSIP serializer thread so a
masquerade could fixup the PJSIP channel without using the serializer.
ASTERISK-24356 #close
Reported by: rmudgett
Review: https://reviewboard.asterisk.org/r/4034/
........
Merged revisions 424471 from http://svn.asterisk.org/svn/asterisk/branches/12
git-svn-id: https://origsvn.digium.com/svn/asterisk/branches/13@424472 65c4cc65-6c06-0410-ace0-fbb531ad65f3
This code originally worked around an issue within res_rtp_asterisk itself.
The wrong socket was being used for the STUN check for RTCP, causing the
port to be the same as RTP. This was subsequently fixed and the RTCP port
provided for the ICE candidate is correct and does not need to be incremented.
ASTERISK-23997 #close
Reported by: Badalian Vyacheslav
Patches:
plus1.diff submitted by Badalian Vyacheslav (license 5249)
........
Merged revisions 421909 from http://svn.asterisk.org/svn/asterisk/branches/11
........
Merged revisions 421910 from http://svn.asterisk.org/svn/asterisk/branches/12
git-svn-id: https://origsvn.digium.com/svn/asterisk/branches/13@421911 65c4cc65-6c06-0410-ace0-fbb531ad65f3
If a user does not provide a port in the fromdomain setting, chan_sip will set
the fromdomainport to STANDARD_SIP_PORT (5060). The fromdomainport value will
then get used unilaterally in certain places. This causes issues with TLS,
where the default port is expected to be 5061.
This patch modifies chan_sip such that fromdomainport is only used if it is
not the standard SIP port; otherwise, the port from the SIP pvt's recorded
self IP address is used.
Review: https://reviewboard.asterisk.org/r/3893/
ASTERISK-24178 #close
Reported by: Elazar Broad
patches:
fromdomainport_fix.diff uploaded by Elazar Broad (License 5835)
........
Merged revisions 421717 from http://svn.asterisk.org/svn/asterisk/branches/1.8
........
Merged revisions 421718 from http://svn.asterisk.org/svn/asterisk/branches/11
........
Merged revisions 421719 from http://svn.asterisk.org/svn/asterisk/branches/12
git-svn-id: https://origsvn.digium.com/svn/asterisk/branches/13@421720 65c4cc65-6c06-0410-ace0-fbb531ad65f3
........
r420089 | mjordan | 2014-08-05 15:10:52 -0500 (Tue, 05 Aug 2014) | 72 lines
ARI: Add channel technology agnostic out of call text messaging
This patch adds the ability to send and receive text messages from various
technology stacks in Asterisk through ARI. This includes chan_sip (sip),
res_pjsip_messaging (pjsip), and res_xmpp (xmpp). Messages are sent using the
endpoints resource, and can be sent directly through that resource, or to a
particular endpoint.
For example, the following would send the message "Hello there" to PJSIP
endpoint alice with a display URI of sip:asterisk@mycooldomain.org:
ari/endpoints/sendMessage?to=pjsip:alice&from=sip:asterisk@mycooldomain.org&body=Hello+There
This is equivalent to the following as well:
ari/endpoints/PJSIP/alice/sendMessage?from=sip:asterisk@mycooldomain.org&body=Hello+There
Both forms are available for message technologies that allow for arbitrary
destinations, such as chan_sip.
Inbound messages can now be received over ARI as well. An ARI application that
subscribes to endpoints will receive messages from those endpoints:
{
"type": "TextMessageReceived",
"timestamp": "2014-07-12T22:53:13.494-0500",
"endpoint": {
"technology": "PJSIP",
"resource": "alice",
"state": "online",
"channel_ids": []
},
"message": {
"from": "\"alice\" <sip:alice@127.0.0.1>",
"to": "pjsip:asterisk@127.0.0.1",
"body": "Watson, come here.",
"variables": []
},
"application": "testsuite"
}
The above was made possible due to some rather major changes in the message
core. This includes (but is not limited to):
- Users of the message API can now register message handlers. A handler has
two callbacks: one to determine if the handler has a destination for the
message, and another to handle it.
- All dialplan functionality of handling a message was moved into a message
handler provided by the message API.
- Messages can now have the technology/endpoint associated with them.
Various other properties are also now more easily accessible.
- A number of ao2 containers that weren't really needed were replaced with
vectors. Iteration over ao2_containers is expensive and pointless when
the lifetime of things is well defined and the number of things is very
small.
res_stasis now has a new file that makes up its structure, messaging. The
messaging functionality implements a message handler, and passes received
messages that match an interested endpoint over to the app for processing.
Note that inadvertently while testing this, I reproduced ASTERISK-23969.
res_pjsip_messaging was incorrectly parsing out the 'to' field, such that
arbitrary SIP URIs mangled the endpoint lookup. This patch includes the
fix for that as well.
Review: https://reviewboard.asterisk.org/r/3726
ASTERISK-23692 #close
Reported by: Matt Jordan
ASTERISK-23969 #close
Reported by: Andrew Nagy
........
r420090 | mjordan | 2014-08-05 15:16:37 -0500 (Tue, 05 Aug 2014) | 2 lines
Remove automerge properties :-(
........
r420097 | mjordan | 2014-08-05 16:36:25 -0500 (Tue, 05 Aug 2014) | 2 lines
test_message: Fix strict-aliasing compilation issue
........
Merged revisions 420089-420090,420097 from http://svn.asterisk.org/svn/asterisk/branches/12
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@420098 65c4cc65-6c06-0410-ace0-fbb531ad65f3
This patch serves two purposes:
(1) It fixes some bugs with endpoint subscriptions not reporting all of the
channel events
(2) It serves as the preliminary work needed for ASTERISK-23692, which allows
for sending/receiving arbitrary out of call text messages through ARI in a
technology agnostic fashion.
The messaging functionality described on ASTERISK-23692 requires two things:
(1) The ability to send/receive messages associated with an endpoint. This is
relatively straight forwards with the endpoint core in Asterisk now.
(2) The ability to send/receive messages associated with a technology and an
arbitrary technology defined URI. This is less straight forward, as
endpoints are formed from a tech + resource pair. We don't have a
mechanism to note that a technology that *may* have endpoints exists.
This patch provides such a mechanism, and fixes a few bugs along the way.
The first major bug this patch fixes is the forwarding of channel messages
to their respective endpoints. Prior to this patch, there were two problems:
(1) Channel caching messages weren't forwarded. Thus, the endpoints missed
most of the interesting bits (such as channel creation, destruction, state
changes, etc.)
(2) Channels weren't associated with their endpoint until after creation.
This resulted in endpoints missing the channel creation message, which
limited the usefulness of the subscription in the first place (a major use
case being 'tell me when this endpoint has a channel'). Unfortunately,
this meant another parameter to ast_channel_alloc. Since not all channel
technologies support an ast_endpoint, this patch makes such a call
optional and opts for a new function, ast_channel_alloc_with_endpoint.
When endpoints are created, they will implicitly create a technology endpoint
for their technology (if one does not already exist). A technology endpoint is
special in that it has no state, cannot have channels created for it, cannot
be created explicitly, and cannot be destroyed except on shutdown. It does,
however, have all messages from other endpoints in its technology forwarded to
it.
Combined with the bug fixes, we now have Stasis messages being properly
forwarded. Consider the following scenario: two PJSIP endpoints (foo and bar),
where bar has a single channel associated with it and foo has two channels
associated with it. The messages would be forwarded as follows:
channel PJSIP/foo-1 --
\
--> endpoint PJSIP/foo --
/ \
channel PJSIP/foo-2 -- \
---- > endpoint PJSIP
/
channel PJSIP/bar-1 -----> endpoint PJSIP/bar --
ARI, through the applications resource, can:
- subscribe to endpoint:PJSIP/foo and get notifications for channels
PJSIP/foo-1,PJSIP/foo-2 and endpoint PJSIP/foo
- subscribe to endpoint:PJSIP/bar and get notifications for channels
PJSIP/bar-1 and endpoint PJSIP/bar
- subscribe to endpoint:PJSIP and get notifications for channels
PJSIP/foo-1,PJSIP/foo-2,PJSIP/bar-1 and endpoints PJSIP/foo,PJSIP/bar
Note that since endpoint PJSIP never changes, it never has events itself. It
merely provides an aggregation point for all other endpoints in its technology
(which in turn aggregate all channel messages associated with that endpoint).
This patch also adds endpoints to res_xmpp and chan_motif, because the actual
messaging work will need it (messaging without XMPP is just sad).
Review: https://reviewboard.asterisk.org/r/3760/
ASTERISK-23692
........
Merged revisions 419196 from http://svn.asterisk.org/svn/asterisk/branches/12
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@419203 65c4cc65-6c06-0410-ace0-fbb531ad65f3
progressinband=never in sip.conf is easily defeated if an onward trunk sends a
progress indication of its own. This is almost certain to happen if the onward
trunk is ISDN or IAX as these technologies send a progress indication even if
early media is not required. This progress message is passed to the caller,
and causes the "never" option to be rather badly named.
This patch changes the behaviour of this setting in the following ways:
1) In sip_write(), do not pass the media unless we have either progressed
beyond INV_EARLY_MEDIA, or we are in INV_EARLY_MEDIA state, and early
media is both set-up and wanted. This helps resolve double-ringing on some
buggy handsets.
2) In sip_indicate(), if we see AST_CONTROL_PROGRESS, but
SIP_PROG_INBAND_NEVER is set, send a 180 Ringing instead to avoid implicitly
enabling early media. Avoid sending double ring indications.
NOTE: the meaning of the SIP_PROGRESS_SENT flag changes slightly in this patch
to also encapsulate the fact that a channel has *sent or received* a 183
Progress indication. This makes the updated code in sip_write() much more
simple.
Review: https://reviewboard.asterisk.org/r/3700
ASTERISK-23972 #close
Reported by: Steve Davies
patches:
inband_never_present_early_media2 uploaded by Steve Davies (License 5012)
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@418868 65c4cc65-6c06-0410-ace0-fbb531ad65f3
Billing records are fair,
To get paid is quite bright,
You should really use ODBC;
Good-bye cdr_sqlite.
Microsoft did once push H.323,
Hell, we all remember NetMeeting.
But try to compile chan_h323 now
And you will take quite a beating.
The XMPP and SIP war was fierce,
And in the distant fray
Was birthed res_jabber/chan_jingle;
But neither to stay.
For everyone did care and chase what Google professed.
"Free Internet Calling" was what devotees cried,
But Google did change the specs so often
That the developers were happy the day chan_gtalk died.
And then there was that odd application
Dedicated to the Polish tongue.
app_saycountpl was subsumed by Say;
One could say its bell was rung.
To read and parse a file from the dialplan
You could (I guess) use an application.
app_readfile did fill that purpose, but I think
A function is perhaps better in its creation.
Barging is rude, I'm not sure why we do it.
Inwardly, the caller will probably sigh.
But if you really must do it,
Don't use app_dahdibarge, use ChanSpy.
We all despise the sound of tinny robots
It makes our queues so cold.
To control such an abomination
It's better to not use Wait/SetMusicOnHold.
It's often nice to know properties of a channel
It makes our calls right
We have a nice function called CHANNEL
And so SIPCHANINFO is sent off into the night.
And now things get odd;
Apparently one could delimit with a colon
Properties from the SIPPEER function!
Commas are in; all others are done.
Finally, a word on pipes and commas.
We're sorry. We can't say it enough.
But those compatibility options in asterisk.conf;
To maintain them forever was just too tough.
This patch removes:
* cdr_sqlite
* chan_gtalk
* chan_jingle
* chan_h323
* res_jabber
* app_saycountpl
* app_readfile
* app_dahdibarge
It removes the following applications/functions:
* WaitMusicOnHold
* SetMusicOnHold
* SIPCHANINFO
It removes the colon delimiter from the SIPPEER function.
Finally, it also removes all compatibility options that were configurable from
asterisk.conf, as these all applied to compatibility with Asterisk 1.4 systems.
Review: https://reviewboard.asterisk.org/r/3698/
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@418019 65c4cc65-6c06-0410-ace0-fbb531ad65f3
........
res_rtp_asterisk: Add SHA-256 support for DTLS and perform DTLS negotiation on RTCP.
This change fixes up DTLS support in res_rtp_asterisk so it can accept and provide
a SHA-256 fingerprint, so it occurs on RTCP, and so it occurs after ICE negotiation
completes. Configuration options to chan_sip and chan_pjsip have also been added to
allow behavior to be tweaked (such as forcing the AVP type media transports in SDP).
ASTERISK-22961 #close
Reported by: Jay Jideliov
Review: https://reviewboard.asterisk.org/r/3679/
Review: https://reviewboard.asterisk.org/r/3686/
........
Merged revisions 417678 from http://svn.asterisk.org/svn/asterisk/branches/12
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@417679 65c4cc65-6c06-0410-ace0-fbb531ad65f3
This patch is essentially a backport of a small portion of r397526 from
ASTERISK-21981. In that patch, pass through support and format attribute
negotiation was added for Opus. Part of that included being more tolerant to
whitespace in the fmtp line of an SDP; that part of the patch is being
applied here.
As the author of the backport pointed out, in SDP, the fmtp line is allowed to
include whitespace between attributes. RFC 3267 chapter 8.3 (from 2001)
includes an example for this. This was not removed in the updated RFC 4867 in
2007.
Review: https://reviewboard.asterisk.org/r/3658
#ASTERISK-23916 #close
Reported by: Alexander Traud
patches:
sdpFMTPspace_Asterisk11.patch uploaded by Alexander Traud (License 6520)
........
Merged revisions 417587 from http://svn.asterisk.org/svn/asterisk/branches/1.8
........
Merged revisions 417588 from http://svn.asterisk.org/svn/asterisk/branches/11
........
Merged revisions 417589 from http://svn.asterisk.org/svn/asterisk/branches/12
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@417590 65c4cc65-6c06-0410-ace0-fbb531ad65f3
When a client takes a long time to process information received from Asterisk,
a write operation using fwrite may fail to write all information. This causes
the underlying file stream to be in an unknown state, such that the socket
must be disconnected. Unfortunately, there are two problems with this in
Asterisk's existing websocket code:
1. Periodically, during the read loop, Asterisk must write to the connected
websocket to respond to pings. As such, Asterisk maintains a reference to
the session during the loop. When ast_http_websocket_write fails, it may
cause the session to decrement its ref count, but this in and of itself
does not break the read loop. The read loop's write, on the other hand,
does not break the loop if it fails. This causes the socket to get in a
'stuck' state, preventing the client from reconnecting to the server.
2. More importantly, however, is that the fwrite in ast_http_websocket_write
fails with a large volume of data when the client takes awhile to process
the information. When it does fail, it fails writing only a portion of
the bytes. With some debugging, it was shown that this was failing in a
similar fashion to ASTERISK-12767. Switching this over to ast_careful_fwrite
with a long enough timeout solved the problem.
Note that this version of the patch, unlike r417310 in Asterisk 11, exposes
configuration options beyond just chan_sip's sip.conf. Configuration options
to configure the write timeout have also been added to pjsip.conf and ari.conf.
#ASTERISK-23917 #close
Reported by: Matt Jordan
Review: https://reviewboard.asterisk.org/r/3624/
........
Merged revisions 417310 from http://svn.asterisk.org/svn/asterisk/branches/11
........
Merged revisions 417311 from http://svn.asterisk.org/svn/asterisk/branches/12
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@417317 65c4cc65-6c06-0410-ace0-fbb531ad65f3
When a framehook is removed - such as the fax gateway framehook - the bridge
framework will re-evaluate the bridge mixing technologies to see if it can
improve the bridging. When this occurs, get_rtp_info will be called to
determine if local or remote bridging can be used. Using remote bridging
will cause a fax to fail, as direct media negotiation will cause some small
number of packets to not arrive at the remote endpoint.
This patch forces local native bridging if T.38 negotiation is in progress or
has been established.
........
Merged revisions 416318 from http://svn.asterisk.org/svn/asterisk/branches/12
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@416319 65c4cc65-6c06-0410-ace0-fbb531ad65f3
Simply establishing a TCP connection and never sending anything to the
configured HTTP port in http.conf will tie up a HTTP connection. Since
there is a maximum number of open HTTP sessions allowed at a time you can
block legitimate connections.
A similar problem exists if a HTTP request is started but never finished.
* Added http.conf session_inactivity timer option to close HTTP
connections that aren't doing anything. Defaults to 30000 ms.
* Removed the undocumented manager.conf block-sockets option. It
interferes with TCP/TLS inactivity timeouts.
* AMI and SIP TLS connections now have better authentication timeout
protection. Though I didn't remove the bizzare TLS timeout polling code
from chan_sip.
* chan_sip can now handle SSL certificate renegotiations in the middle of
a session. It couldn't do that before because the socket was non-blocking
and the SSL calls were not restarted as documented by the OpenSSL
documentation.
* Fixed an off nominal leak of the ssl struct in
handle_tcptls_connection() if the FILE stream failed to open and the SSL
certificate negotiations failed.
The patch creates a custom FILE stream handler to give the created FILE
streams inactivity timeout and timeout after a specific moment in time
capability. This approach eliminates the need for code using the FILE
stream to be redesigned to deal with the timeouts.
This patch indirectly fixes most of ASTERISK-18345 by fixing the usage of
the SSL_read/SSL_write operations.
ASTERISK-23673 #close
Reported by: Richard Mudgett
........
Merged revisions 415841 from http://svn.asterisk.org/svn/asterisk/branches/1.8
........
Merged revisions 415854 from http://svn.asterisk.org/svn/asterisk/branches/11
........
Merged revisions 415896 from http://svn.asterisk.org/svn/asterisk/branches/12
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@415907 65c4cc65-6c06-0410-ace0-fbb531ad65f3
Asterisk started counting the session timer at INVITE while the other
end correctly started at 200. This meant that for short session-expiries
(90 seconds) combined with long ringing times (e.g. 30 seconds), asterisk
would wrongly assume that the timer was hit before the other end thought
it was time to send a session refresh. This resulted in prematurely
ended calls.
This changes the session timer to start counting first at 200 like RFC
says it should.
(Also removed a few excess NULL checks that would never hit, because if
they did, asterisk would have crashed already.)
ASTERISK-22551 #close
Reported by: i2045
Review: https://reviewboard.asterisk.org/r/3562/
........
Merged revisions 414620 from http://svn.asterisk.org/svn/asterisk/branches/1.8
........
Merged revisions 414628 from http://svn.asterisk.org/svn/asterisk/branches/11
........
Merged revisions 414636 from http://svn.asterisk.org/svn/asterisk/branches/12
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@414643 65c4cc65-6c06-0410-ace0-fbb531ad65f3
Per rfc3892, the Referred-By header in a REFER must be copied into the
referenced request (IE. The outgoing INVITE to the transfer target).
* Automatically put the Referred-By header in the outgoing INVITE message
if the SIPREFERREDBYHDR channel variable is defined with a value.
* Made chan_sip.c:get_refer_info() set SIPREFERREDBYHDR for inheritance so
chan_pjsip has a better chance to interoperate.
* Fixed refer_blind_callback() and refer_incoming_refer_request() to not
modify the data in the pointer returned by pjsip_msg_find_hdr_by_name().
It seems wrong to modify that data since the calling routine doesn't own
the buffer.
ASTERISK-23501 #close
Reported by: John Bigelow
Review: https://reviewboard.asterisk.org/r/3514/
........
Merged revisions 413210 from http://svn.asterisk.org/svn/asterisk/branches/12
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@413211 65c4cc65-6c06-0410-ace0-fbb531ad65f3
* Fixed early exit in sip_msg_send() not destroying the message iterator.
* Made ast_msg_var_iterator_next() and ast_msg_var_iterator_destroy()
tolerant of a NULL iter parameter in case ast_msg_var_iterator_init()
fails.
* Made ast_msg_var_iterator_destroy() clean up any current message data
ref.
* Made struct ast_msg_var_iterator, ast_msg_var_iterator_init(),
ast_msg_var_iterator_next(), ast_msg_var_unref_current(), and
ast_msg_var_iterator_destroy() use iter instead of i.
* Eliminated RAII_VAR usage in res_pjsip_messaging.c:vars_to_headers().
........
Merged revisions 413139 from http://svn.asterisk.org/svn/asterisk/branches/11
........
Merged revisions 413142 from http://svn.asterisk.org/svn/asterisk/branches/12
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@413144 65c4cc65-6c06-0410-ace0-fbb531ad65f3
In r411189, some behavior was changed which made sendrpid behavior
act in a more trusting manner by sending full user data for peers
set with private caller presence in P-Asserted-Identity headers.
Since this changed long time expected behaviors, we decided to pull
that patch when that was pointed out by the community. Instead, this
patch provides a trust_id_outbound setting which will expose the data
per RFC-3325 if set to 'yes' and simply not send the PAI/RPID headers
at all if set to 'no'. By default trust_id_outbound will be set to
'legacy' which will preserve the behavior prior to these patches.
Extra special thanks to Walter Doekes for providing advice and
feedback.
(closes issue AST-1301)
(closes issue ASTERISK-19465)
Reported by: Krzysztof Chmielewski
Review: https://reviewboard.asterisk.org/r/3447/
........
Merged revisions 412744 from http://svn.asterisk.org/svn/asterisk/branches/1.8
........
Merged revisions 412746 from http://svn.asterisk.org/svn/asterisk/branches/11
........
Merged revisions 412747 from http://svn.asterisk.org/svn/asterisk/branches/12
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@412759 65c4cc65-6c06-0410-ace0-fbb531ad65f3
This patch is a continuation of https://reviewboard.asterisk.org/r/3349/,
committed in r412303.
It resolves a finding oej had that the phone-context be available in a
channel variable separate from SIPDOMAIN. This patch adds that variable as
SIPURIPHONECONTEXT. It also allows a local number (or global number specified
in the TEL URI) to be used to look up as a peer.
(issue ASTERISK-17179)
Review: https://reviewboard.asterisk.org/r/3349/
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@412467 65c4cc65-6c06-0410-ace0-fbb531ad65f3
The failing assertion ensures that the final snapshot gets generated so
CDR records can get finalized. The only place where a channel staging
snapshot flag could be left set is in chan_sip.c:handle_request_bye().
The function could return before clearing the flag because the channel
could dissappear while the function had to have the channel unlocked.
* Fixed handle_request_bye() channel snapshot staging coverage area to not
have a return in the middle of it and be unable to clear the staging flag.
* Pushed the channel snapshot staging coverage area into
ast_rtp_instance_set_stats_vars() to ensure that the staging is not
interrutped.
* Made callers of ast_rtp_instance_set_stats_vars() not call it with any
channels or channel driver private locks held to eliminate the deadlock
potential. The callers must hold references to the passed in channel and
rtp objects.
* Eliminated sip_hangup() trying to get the bridge peer. It is futile at
this point because the channel could never be in a bridge.
Review: https://reviewboard.asterisk.org/r/3431/
........
Merged revisions 412385 from http://svn.asterisk.org/svn/asterisk/branches/12
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@412386 65c4cc65-6c06-0410-ace0-fbb531ad65f3
---
r411189 | jrose | 2014-03-26 10:50:48 -0500 (Wed, 26 Mar 2014) | 12 lines
chan_sip: Send real CallerID information with P-Assserted-Identity (RFC-3325)
Prior to this patch, the P-Asserted-Identity header would include anonymous
caller id information which seems to go against the point of the
P-Asserted-Identity header. Now the real caller ID information will be
included in this header. Also, no privacy header would be included.
This patch adds 'Privacy: id' to outgoing SIP messages that include the
P-Asserted-Identity header.
(closes issue AST-1301)
---
........
Merged revisions 412328 from http://svn.asterisk.org/svn/asterisk/branches/1.8
........
Merged revisions 412329 from http://svn.asterisk.org/svn/asterisk/branches/11
........
Merged revisions 412330 from http://svn.asterisk.org/svn/asterisk/branches/12
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@412331 65c4cc65-6c06-0410-ace0-fbb531ad65f3
This patch adds support for handling TEL URIs in inbound INVITE requests.
This includes the Request URI and the From URI. The number specified in
the Request URI will be the destination of the inbound channel in the dialplan.
The phone-context specified in the Request URI will be stored in the
TELPHONECONTEXT channel variable.
Review: https://reviewboard.asterisk.org/r/3349
ASTERISK-17179 #close
Reported by: Geert Van Pamel
Tested by: Geert Van Pamel
patches:
asterisk-12.0.0-chan_sip-RFC3966_patch.txt uploaded by Geert Van Pamel (License 6140)
asterisk-12.0.0-reqresp_parser-RFC3966_patch.txt uploaded by Geert Van Pamel (License 6140)
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@412292 65c4cc65-6c06-0410-ace0-fbb531ad65f3
This patch does the following:
(1) It makes REF_DEBUG a meneselect item. Enabling REF_DEBUG now enables
REF_DEBUG globally throughout Asterisk.
(2) The ref debug log file is now created in the AST_LOG_DIR directory.
Every run will now blow away the previous run (as large ref files
sometimes caused issues). We now also no longer open/close the file
on each write, instead relying on fflush to make sure data gets written
to the file (in case the ao2 call being performed is about to cause a
crash)
(3) It goes with a comma delineated format for the ref debug file. This
makes parsing much easier. This also now includes the thread ID of the
thread that caused ref change.
(4) A new python script instead for refcounting has been added in the
contrib/scripts folder.
(5) The old refcounter implementation in utils/ has been removed.
Review: https://reviewboard.asterisk.org/r/3377/
........
Merged revisions 412114 from http://svn.asterisk.org/svn/asterisk/branches/1.8
........
Merged revisions 412115 from http://svn.asterisk.org/svn/asterisk/branches/11
........
Merged revisions 412153 from http://svn.asterisk.org/svn/asterisk/branches/12
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@412154 65c4cc65-6c06-0410-ace0-fbb531ad65f3
The masquerade supertest frequently fails because either the local channel
chain doesn't completely optimize out or the DTMF handshake doesn't
completely get accross. Local channel optimization requires frames
flowing to trigger when optimization can happen. When optimization
happens the media frame that triggered the optimization is dropped.
Sending DTMF requires frames to flow in the other direction for timing
purposes while sending nothing. If internal timing is not enabled when
MOH is playing, Asterisk switches to received timing when an audio frame
is received. With optimization dropping media frames and MOH not sending
frames unless it receives frames, occasionaly there are no more frames
being passed and the test fails.
* The asterisk command line -I option and the asterisk.conf
internal_timing option are removed. Asterisk now always uses internal
timing when needed if any timing module is loaded. The issue
ASTERISK-14861 did this quite awhile ago in v1.4 but effectively is broken
if other internal timing modules besides DAHDI are used. The
ast_read_generator_actions() now only does received timing if it has no
choice for frame generators like MOH, silence, and playback streaming.
* Cleaned up some code dealing with frame generators in
ast_deactivate_generator(), generator_write_format_change(),
ast_activate_generator(), and ast_channel_stop_silence_generator().
* Removed ast_internal_timing_enabled(), AST_OPT_FLAG_INTERNAL_TIMING, and
ast_opt_internal_timing.
ASTERISK-22846 #close
Reported by: Matt Jordan
Review: https://reviewboard.asterisk.org/r/3414/
........
Merged revisions 411715 from http://svn.asterisk.org/svn/asterisk/branches/1.8
........
Merged revisions 411716 from http://svn.asterisk.org/svn/asterisk/branches/11
........
Merged revisions 411717 from http://svn.asterisk.org/svn/asterisk/branches/12
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@411724 65c4cc65-6c06-0410-ace0-fbb531ad65f3
If update_provisional_keepalive() is called while
send_provisional_keepalive_full() is waiting on the PVT lock, then
pvt->provisional_keepalive_sched_id will be changed to a new sched_id
value by update_provisional_keepalive(), but that new sched_id then may
be overwritten with -1 by send_provisional_keepalive_full(), killing
the pvt's reference to a schedule and "leaking" the reference.
(closes issue ASTERISK-22079)
Review: https://reviewboard.asterisk.org/r/3368/
Reported by: Jamuel Starkey, Matteo, Leif Madsen, Steve Davies
Patches:
provisional_keepalive_fix.diff uploaded by Steve Davies (license 5012)
........
Merged revisions 411088 from http://svn.asterisk.org/svn/asterisk/branches/1.8
........
Merged revisions 411089 from http://svn.asterisk.org/svn/asterisk/branches/11
........
Merged revisions 411091 from http://svn.asterisk.org/svn/asterisk/branches/12
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@411092 65c4cc65-6c06-0410-ace0-fbb531ad65f3
Much needed was a way to assign id to objects on creation, and
much change was necessary to accomplish it. Channel uniqueids
and linkedids are split into separate string and creation time
components without breaking linkedid propgation. This allowed
the uniqueid to be specified by the user interface - and those
values are now carried through to channel creation, adding the
assignedids value to every function in the chain including the
channel drivers. For local channels, the second channel can be
specified or left to default to a ;2 suffix of first. In ARI,
bridge, playback, and snoop objects can also be created with a
specified uniqueid.
Along the way, the args order to allocating channels was fixed
in chan_mgcp and chan_gtalk, and linkedid is no longer lost as
masquerade occurs.
(closes issue ASTERISK-23120)
Review: https://reviewboard.asterisk.org/r/3191/
........
Merged revisions 410157 from http://svn.asterisk.org/svn/asterisk/branches/12
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@410158 65c4cc65-6c06-0410-ace0-fbb531ad65f3
This patch moves setting SIP_DEFER_BY_ON_TRANSFER prior to calling
ast_bridge_transfer_blind. This prevents a BYE from being sent prior to the
NOTIFY request that informs the transferor if the transfer succeeded or failed.
This patch also clears said flag from the off nominal NOTIFY paths in the
local_attended_transfer code, as once we've sent the NOTIFY request it is safe
to send by the BYE request.
This was caught by the blind-transfer-accountcode test in the Asterisk Test
Suite.
(closes issue ASTERISK-23290)
Reported by: Matt Jordan
Review: https://reviewboard.asterisk.org/r/3214/
........
Merged revisions 408069 from http://svn.asterisk.org/svn/asterisk/branches/12
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@408070 65c4cc65-6c06-0410-ace0-fbb531ad65f3
* Move route code to sip/route.c + sip/include/route.h
* Rename functions to sip_route_*
* Replace ad-hoc list code with macro's from linkedlists.h
* Create sip_route_process_header() to processes Path and Record-Route headers
(previously done with different code in build_route and build_path)
* Add use of const where possible
* Move struct uriparams, struct contact and contactliststruct from sip.h to
reqresp_parser.h. sip/route.c uses reqresp_parser.h but not sip.h, this was
a problem. These moved declares are not used outside of reqresp_parser.
* While modifying reqprep() the lack of {} caused me trouble. I added them.
* Code outside route.c treats sip_route as an opaque structure, using macro's
or procedures for all access.
(closes issue ASTERISK-22582)
Reported by: Corey Farrell
Review: https://reviewboard.asterisk.org/r/3173/
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@407926 65c4cc65-6c06-0410-ace0-fbb531ad65f3
Fixes typos of "transfered" instead of "transferred" in various code. Fixes incorrect gosub param help text for app_queue.
Fixes Asterisk man pages containing unquoted minus signs. Adds note about the "textsupport" option in sip.conf.sample.
(issue ASTERISK-23061)
(issue ASTERISK-23028)
(issue ASTERISK-23046)
(issue ASTERISK-23027)
(closes issue ASTERISK-23061)
(closes issue ASTERISK-23028)
(closes issue ASTERISK-23046)
(closes issue ASTERISK-23027)
Reported by: Eugene, Jeremy Laine, Denis Pantsyrev
Patches:
transferred.patch uploaded by Jeremy Laine (license 6561)
hyphen.patch uploaded by Jeremy Laine (license 6561)
sip.conf.sample.patch uploaded by Eugene (license 6360)
........
Merged revisions 405791 from http://svn.asterisk.org/svn/asterisk/branches/1.8
........
Merged revisions 405792 from http://svn.asterisk.org/svn/asterisk/branches/11
........
Merged revisions 405829 from http://svn.asterisk.org/svn/asterisk/branches/12
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@405830 65c4cc65-6c06-0410-ace0-fbb531ad65f3
This change is in preparation for external MWI support.
Removed code from the system for normal mailbox handling that appends
@default to the mailbox identifier if it does not have a context. The
only exception is the legacy hasvoicemail users.conf option. The legacy
option will only work for app_voicemail mailboxes. The system cannot make
any assumptions about the format of the mailbox identifer used by
app_voicemail.
chan_sip and chan_dahdi/sig_pri had the most changes because they both
tried to interpret the mailbox identifier. chan_sip just stored and
compared the two components. chan_dahdi actually used the box
information.
The ISDN MWI support configuration options had to be reworked because
chan_dahdi was parsing the box@context format to get the box number. As a
result the mwi_vm_boxes chan_dahdi.conf option was added and is documented
in the chan_dahdi.conf.sample file.
Review: https://reviewboard.asterisk.org/r/3072/
........
Merged revisions 404348 from http://svn.asterisk.org/svn/asterisk/branches/12
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@404350 65c4cc65-6c06-0410-ace0-fbb531ad65f3
The change contains a slightly adjusted patch that was on the issue
(submitted by kmoore). A fix was made by adding in a bridge lock
while calling bridge_start/stop from the framehook callback. Since
the framehook callback is not called from the bridging core the bridge
is not locked, but needs to be before calling bridge_start.
(closes issue ASTERISK-22749)
Reported by: Kinsey Moore
Review: https://reviewboard.asterisk.org/r/3066/
Patches:
lock_inversion.diff uploaded by kmoore (license 6273)
........
Merged revisions 403767 from http://svn.asterisk.org/svn/asterisk/branches/12
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@403768 65c4cc65-6c06-0410-ace0-fbb531ad65f3
This adds channel locks around calls to create channel snapshots as well
as other functions which operate on a channel and then end up
creating a channel snapshot. Functions that expect the channel to be
locked prior to being called have had their documentation updated to
indicate such.
........
Merged revisions 403311 from http://svn.asterisk.org/svn/asterisk/branches/12
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@403314 65c4cc65-6c06-0410-ace0-fbb531ad65f3
For outbound register requests the tag on the From line was
updated every 20 seconds prior to a successful registration
and also once for each registration renewal. That behavior
can possibly cause the registration to be denied because of
the different tag, and is not aligned with the intention of
RFC 3261 8.1.3.5 "... request constitutes a new transaction
and SHOULD have the same value of the Call-ID, To, and From
of the previous request...". This updates chan_sip to have
a field to keep the local tag in the registration structure
and use that tag for registration requests where the callid
is also unchanged.
(closes issue ASTERISK-12117)
Reported by: Pawel Pierscionek
Review: https://reviewboard.asterisk.org/r/2988/
........
Merged revisions 402604 from http://svn.asterisk.org/svn/asterisk/branches/1.8
........
Merged revisions 402605 from http://svn.asterisk.org/svn/asterisk/branches/11
........
Merged revisions 402606 from http://svn.asterisk.org/svn/asterisk/branches/12
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@402607 65c4cc65-6c06-0410-ace0-fbb531ad65f3
While looking at ASTERISK-22236, Walter Doekes pointed out that when running
"sip show peers", the setting being displayed can be confusing. The display of
"N" used to mean NAT (i.e. yes). The NAT setting has gone through many
different changes resulting in the display of different characters to try and
convey what the current setting is for 'Forcerport' (A for Auto and Forcerport
is currently on, a for Auto but Forcerport is off, Y for yes, and N for no).
During the initial code review to try and clarify these settings (especially
since "N" no longer meant what it used to mean in prior versions of Asterisk),
Mark Michelson suggested using the full space available to display the settings
which helped to make the settings very clear. That was a great suggestion.
Therefore, this patch does the following:
* The column for 'Forcerport' now will show: Auto (Yes), Auto (No), Yes, or No.
* A column for the 'Comedia' setting has been added. It too will display the
setting in a non-cryptic way: Auto (Yes), Auto (No), Yes, or No.
* UPGRADE.txt has been updated to document this change.
(closes issue ASTERISK-22728)
Reported by: Walter Doekes
Tested by: Michael L. Young
Patches:
asterisk-forcerport-display-clarification_v3.diff
uploaded by Michael L. Young (license 5026)
Review: https://reviewboard.asterisk.org/r/2941
........
Merged revisions 402111 from http://svn.asterisk.org/svn/asterisk/branches/11
........
Merged revisions 402112 from http://svn.asterisk.org/svn/asterisk/branches/12
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@402113 65c4cc65-6c06-0410-ace0-fbb531ad65f3
A condition was added in a commit to fix ASTERISK-21374, that, if the
SIP_PAGE3_NAT_AUTO_RPORT flag was set, to then copy a peer's SIP_NAT_FORCE_RPORT
flag to the dialog. This condition should not have been there since it assumed
that if Asterisk is in an environment where NAT is involved, that the auto_* nat
settings or force_rport setting would be on in the global settings. If the nat
setting in the global setting is set to 'nat=no' and then turned on for peers
(which is not quite the recommended way, although it is allowed) this flag is
never copied to the dialog resulting in problems like, REGISTER replies going
to the wrong port.
This patch removes this conditional check and will now always use the peer's
flag which by this point in the code the checks on whether the peer is behind
NAT or not (if using auto_force_rport) have already been run.
(closes issue ASTERISK-22236)
Reported by: Filip Frank
Tested by: Michael L. Young
Patches:
asterisk-2236-always-set-rport.diff uploaded
by Michael L. Young (license 5026)
Review: https://reviewboard.asterisk.org/r/2919/
........
Merged revisions 401167 from http://svn.asterisk.org/svn/asterisk/branches/11
........
Merged revisions 401168 from http://svn.asterisk.org/svn/asterisk/branches/12
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@401169 65c4cc65-6c06-0410-ace0-fbb531ad65f3
When a 200 OK for an initial INVITE is received, we were doing
the right thing by ACKing and sending an immediate BYE. However,
we also were doing the wrong thing and queuing an answer frame,
thus causing the call to be answered. This would cause the call
to be hung up by the channel thread, thus resulting in a second
BYE being sent out.
In this fix, I also have set the hangupcause to be correct since
the initial BYE being sent by Asterisk had an unknown hangup
cause. I have changed to using "Bearer capabilty not available"
since the call was hung up due to an SDP offer/answer error.
(closes issue ASTERISK-22621)
reported by Kinsey Moore
........
Merged revisions 400970 from http://svn.asterisk.org/svn/asterisk/branches/1.8
........
Merged revisions 400971 from http://svn.asterisk.org/svn/asterisk/branches/11
........
Merged revisions 400984 from http://svn.asterisk.org/svn/asterisk/branches/12
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@400998 65c4cc65-6c06-0410-ace0-fbb531ad65f3
Channel snapshots have string representations of the channel's native formats.
Prior to this change, the format strings were re-created on ever channel snapshot
creation. Since channel native formats rarely change, this was very wasteful.
Now, string representations of formats may optionally be stored on the ast_format_cap
for cases where string representations may be requested frequently. When formats
are altered, the string cache is marked as invalid. When strings are requested, the
cache validity is checked. If the cache is valid, then the cached strings are copied.
If the cache is invalid, then the string cache is rebuilt and copied, and the cache
is marked as being valid again.
Review: https://reviewboard.asterisk.org/r/2879
........
Merged revisions 400356 from http://svn.asterisk.org/svn/asterisk/branches/12
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@400363 65c4cc65-6c06-0410-ace0-fbb531ad65f3
........
r399887 | dlee | 2013-09-26 10:41:47 -0500 (Thu, 26 Sep 2013) | 1 line
Minor performance bump by not allocate manager variable struct if we don't need it
........
r400138 | dlee | 2013-09-30 10:24:00 -0500 (Mon, 30 Sep 2013) | 23 lines
Stasis performance improvements
This patch addresses several performance problems that were found in
the initial performance testing of Asterisk 12.
The Stasis dispatch object was allocated as an AO2 object, even though
it has a very confined lifecycle. This was replaced with a straight
ast_malloc().
The Stasis message router was spending an inordinate amount of time
searching hash tables. In this case, most of our routers had 6 or
fewer routes in them to begin with. This was replaced with an array
that's searched linearly for the route.
We more heavily rely on AO2 objects in Asterisk 12, and the memset()
in ao2_ref() actually became noticeable on the profile. This was
#ifdef'ed to only run when AO2_DEBUG was enabled.
After being misled by an erroneous comment in taskprocessor.c during
profiling, the wrong comment was removed.
Review: https://reviewboard.asterisk.org/r/2873/
........
r400178 | dlee | 2013-09-30 13:26:27 -0500 (Mon, 30 Sep 2013) | 24 lines
Taskprocessor optimization; switch Stasis to use taskprocessors
This patch optimizes taskprocessor to use a semaphore for signaling,
which the OS can do a better job at managing contention and waiting
that we can with a mutex and condition.
The taskprocessor execution was also slightly optimized to reduce the
number of locks taken.
The only observable difference in the taskprocessor implementation is
that when the final reference to the taskprocessor goes away, it will
execute all tasks to completion instead of discarding the unexecuted
tasks.
For systems where unnamed semaphores are not supported, a really
simple semaphore implementation is provided. (Which gives identical
performance as the original taskprocessor implementation).
The way we ended up implementing Stasis caused the threadpool to be a
burden instead of a boost to performance. This was switched to just
use taskprocessors directly for subscriptions.
Review: https://reviewboard.asterisk.org/r/2881/
........
r400180 | dlee | 2013-09-30 13:39:34 -0500 (Mon, 30 Sep 2013) | 28 lines
Optimize how Stasis forwards are dispatched
This patch optimizes how forwards are dispatched in Stasis.
Originally, forwards were dispatched as subscriptions that are invoked
on the publishing thread. This did not account for the vast number of
forwards we would end up having in the system, and the amount of work it
would take to walk though the forward subscriptions.
This patch modifies Stasis so that rather than walking the tree of
forwards on every dispatch, when forwards and subscriptions are changed,
the subscriber list for every topic in the tree is changed.
This has a couple of benefits. First, this reduces the workload of
dispatching messages. It also reduces contention when dispatching to
different topics that happen to forward to the same aggregation topic
(as happens with all of the channel, bridge and endpoint topics).
Since forwards are no longer subscriptions, the bulk of this patch is
simply changing stasis_subscription objects to stasis_forward objects
(which, admittedly, I should have done in the first place.)
Since this required me to yet again put in a growing array, I finally
abstracted that out into a set of ast_vector macros in
asterisk/vector.h.
Review: https://reviewboard.asterisk.org/r/2883/
........
r400181 | dlee | 2013-09-30 13:48:57 -0500 (Mon, 30 Sep 2013) | 28 lines
Remove dispatch object allocation from Stasis publishing
While looking for areas for performance improvement, I realized that an
unused feature in Stasis was negatively impacting performance.
When a message is sent to a subscriber, a dispatch object is allocated
for the dispatch, containing the topic the message was published to, the
subscriber the message is being sent to, and the message itself.
The topic is actually unused by any subscriber in Asterisk today. And
the subscriber is associated with the taskprocessor the message is being
dispatched to.
First, this patch removes the unused topic parameter from Stasis
subscription callbacks.
Second, this patch introduces the concept of taskprocessor local data,
data that may be set on a taskprocessor and provided along with the data
pointer when a task is pushed using the ast_taskprocessor_push_local()
call. This allows the task to have both data specific to that
taskprocessor, in addition to data specific to that invocation.
With those two changes, the dispatch object can be removed completely,
and the message is simply refcounted and sent directly to the
taskprocessor.
Review: https://reviewboard.asterisk.org/r/2884/
........
Merged revisions 399887,400138,400178,400180-400181 from http://svn.asterisk.org/svn/asterisk/branches/12
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@400186 65c4cc65-6c06-0410-ace0-fbb531ad65f3
When Asterisk receives a 200 OK in response to an invite, that peer should have
sent an SDP at some point by then. If the channel has never received an SDP,
media won't have been set and the remote address won't be known. Endpoints in
general should not be doing this. This patch makes it so that Asterisk will
simply hang up a call if it sends a 200 OK at this point. So far this odd
behavior for endpoints has only been observed in tests which involved manually
created SIP transactions in SIPp.
(closes issue ASTERISK-22424)
Reported by: Jonathan Rose
Review: https://reviewboard.asterisk.org/r/2827/
........
Merged revisions 399939 from http://svn.asterisk.org/svn/asterisk/branches/1.8
........
Merged revisions 399962 from http://svn.asterisk.org/svn/asterisk/branches/11
........
Merged revisions 399976 from http://svn.asterisk.org/svn/asterisk/branches/12
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@399978 65c4cc65-6c06-0410-ace0-fbb531ad65f3
1st Issue
When a realtime peer sends an un-REGISTER request, Asterisk
un-registers the peer but the database table record still has regseconds and
fullcontact for the peer. This results in calls attempting to be routed to the
peer which is no longer registered. The expected behavior is to get
busy/congested when attempting to call an un-registered peer through the
dialplan.
What was discovered is that we are clearing out the peer's registration in the
database in parse_register_contact() when calling expire_register() but then
upon returning from parse_register_contact(), update_peer() is run which stores
back in the database table regseconds and fullcontact.
2nd Issue
The reporter pointed out that the 200 ok being returned by Asterisk
after un-registering a peer contains a Contact header with ;expires= and the
Expires header is not set to 0. This is actually a regression.
Tests were created for this second issue (ASTERISK-22548). The tests have been
reviewed and a Ship It! was received on those tests.
This patch does the following:
* Do not ignore the Expires header value even when it is set to 0. The patch
sets the pvt->expiry earlier on in the function so that it is set properly and
used.
* If pvt->expiry is 0, do not call update_peer since that means the peer has
already been un-registered and there is no need to update the database record
again since nothing has changed.
(closes issue ASTERISK-22428)
Reported by: Ben Smithurst
Tested by: Ben Smithurst, Michael L. Young
Patches:
asterisk-22428-rt-peer-update-and-expires-header.diff
by Michael L. Young (license 5026)
Review: https://reviewboard.asterisk.org/r/2869/
........
Merged revisions 399794 from http://svn.asterisk.org/svn/asterisk/branches/1.8
........
Merged revisions 399795 from http://svn.asterisk.org/svn/asterisk/branches/11
........
Merged revisions 399796 from http://svn.asterisk.org/svn/asterisk/branches/12
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@399797 65c4cc65-6c06-0410-ace0-fbb531ad65f3
The Dial, Queue, and FollowMe applications need to inhibit the bridging
initial connected line exchange in order to support the 'I' option.
* Replaced the pass_reference flag on ast_bridge_join() with a flags
parameter to pass other flags defined by enum ast_bridge_join_flags.
* Replaced the independent flag on ast_bridge_impart() with a flags
parameter to pass other flags defined by enum ast_bridge_impart_flags.
* Since the Dial, Queue, and FollowMe applications are now the only
callers of ast_bridge_call() and ast_bridge_call_with_flags(), changed the
calling contract to require the initial COLP exchange to already have been
done by the caller.
* Made all callers of ast_bridge_impart() check the return value. It is
important. As a precaution, I also made the compiler complain now if it
is not checked.
* Did some cleanup in parking_tests.c as a result of checking the
ast_bridge_impart() return value.
An independent, but associated change is:
* Reduce stack usage in ast_indicate_data() and add a dropping redundant
connected line verbose message.
(closes issue ASTERISK-22072)
Reported by: Joshua Colp
Review: https://reviewboard.asterisk.org/r/2845/
........
Merged revisions 399136 from http://svn.asterisk.org/svn/asterisk/branches/12
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@399138 65c4cc65-6c06-0410-ace0-fbb531ad65f3
With the new work in Asterisk 12, there are some uses of the
optional_api that are prone to failure. The details are rather involved,
and captured on [the wiki][1].
This patch addresses the issue by removing almost all of the magic from
the optional API implementation. Instead of relying on weak symbol
resolution, a new optional_api.c module was added to Asterisk core.
For modules providing an optional API, the pointer to the implementation
function is registered with the core. For modules that use an optional
API, a pointer to a stub function, along with a optional_ref function
pointer are registered with the core. The optional_ref function pointers
is set to the implementation function when it's provided, or the stub
function when it's now.
Since the implementation no longer relies on magic, it is now supported
on all platforms. In the spirit of choice, an OPTIONAL_API flag was
added, so we can disable the optional_api if needed (maybe it's buggy on
some bizarre platform I haven't tested on)
The AST_OPTIONAL_API*() macros themselves remained unchanged, so
existing code could remain unchanged. But to help with debugging the
optional_api, the patch limits the #include of optional API's to just
the modules using the API. This also reduces resource waste maintaining
optional_ref pointers that aren't used.
Other changes made as a part of this patch:
* The stubs for http_websocket that wrap system calls set errno to
ENOSYS.
* res_http_websocket now properly increments module use count.
* In loader.c, the while() wrappers around dlclose() were removed. The
while(!dlclose()) is actually an anti-pattern, which can lead to
infinite loops if the module you're attempting to unload exports a
symbol that was directly linked to.
* The special handling of nonoptreq on systems without weak symbol
support was removed, since we no longer rely on weak symbols for
optional_api.
[1]: https://wiki.asterisk.org/wiki/x/wACUAQ
(closes issue ASTERISK-22296)
Reported by: Matt Jordan
Review: https://reviewboard.asterisk.org/r/2797/
........
Merged revisions 397989 from http://svn.asterisk.org/svn/asterisk/branches/12
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@397990 65c4cc65-6c06-0410-ace0-fbb531ad65f3
If the SIP channel driver processes an invalid SDP that defines media
descriptions before connection information, it may attempt to reference
the socket address information even though that information has not yet
been set. This will cause a crash.
This patch adds checks when handling the various media descriptions that
ensures the media descriptions are handled only if we have connection
information suitable for that media.
Thanks to Walter Doekes, OSSO B.V., for reporting, testing, and providing
the solution to this problem.
(closes issue ASTERISK-22007)
Reported by: wdoekes
Tested by: wdoekes
patches:
issueA22007_sdp_without_c_death.patch uploaded by wdoekes (License 5674)
........
Merged revisions 397756 from http://svn.asterisk.org/svn/asterisk/branches/1.8
........
Merged revisions 397757 from http://svn.asterisk.org/svn/asterisk/branches/10
........
Merged revisions 397758 from http://svn.asterisk.org/svn/asterisk/branches/11
........
Merged revisions 397759 from http://svn.asterisk.org/svn/asterisk/branches/12
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@397760 65c4cc65-6c06-0410-ace0-fbb531ad65f3
A remote exploitable crash vulnerability exists in the SIP channel driver if an
ACK with SDP is received after the channel has been terminated. The handling
code incorrectly assumed that the channel would always be present.
This patch adds a check such that the SDP will only be parsed and applied if
Asterisk has a channel present that is associated with the dialog.
Note that the patch being applied was modified only slightly from the patch
provided by Walter Doekes of OSSO B.V.
(closes issue ASTERISK-21064)
Reported by: Colin Cuthbertson
Tested by: wdoekes, Colin Cutherbertson
patches:
issueA21064_fix.patch uploaded by wdoekes (License 5674)
........
Merged revisions 397710 from http://svn.asterisk.org/svn/asterisk/branches/1.8
........
Merged revisions 397711 from http://svn.asterisk.org/svn/asterisk/branches/10
........
Merged revisions 397712 from http://svn.asterisk.org/svn/asterisk/branches/11
........
Merged revisions 397713 from http://svn.asterisk.org/svn/asterisk/branches/12
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@397753 65c4cc65-6c06-0410-ace0-fbb531ad65f3
This patch adds pass through support for Opus and VP8. That includes:
* Format attribute negotiation for Opus. Note that unlike some other codecs,
the draft RFC specifies having spaces delimiting the attributes in addition
to ';', so you have "attra=X; attrb=Y". This broke the attribute parsing in
chan_sip, so a small tweak was also included in this patch for that.
* A format attribute negotiation module for Opus, res_format_attr_opus
* Fast picture update for VP8. Since VP8 uses a different RTCP packet number
than FIR, this really is specific to VP8 at this time.
Note that the format attribute negotiation in res_pjsip_sdp_rtp was written
by mjordan. The rest of this patch was written completely by Lorenzo Miniero.
Review: https://reviewboard.asterisk.org/r/2723/
(closes issue ASTERISK-21981)
Reported by: Tzafrir Cohen
patches:
asterisk_opus+vp8_passthrough_20130718.patch uploaded by lminiero (License 6518)
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@397526 65c4cc65-6c06-0410-ace0-fbb531ad65f3
If a From header on an outbound out-of-call SIP MESSAGE were
malformed, the result could crash Asterisk.
In addition, if a From header on an incoming out-of-call SIP
MESSAGE request were malformed, the message was happily accepted
rather than being rejected up front. The incoming message path
would not result in a crash, but the behavior was bad nonetheless.
(closes issue ASTERISK-22185)
reported by Zhang Lei
........
Merged revisions 397254 from http://svn.asterisk.org/svn/asterisk/branches/11
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@397255 65c4cc65-6c06-0410-ace0-fbb531ad65f3
The SIP_CODEC family of variables let you set the preferred codec to be
offered on an outbound INVITE request. However, for video calls, you need to
be able to set both the audio and video codecs to be offered. This patch lets
the SIP_CODEC variables accept a comma delineated list of codecs. The first
codec in the list is set as the preferred codec; additional codecs are still
offered however.
This lets a dialplan writer set both audio and video codecs, e.g.,
Set(SIP_CODEC=ulaw,h264)
Note that this feature was written by both Dennis Guse and Frank Haase
Review: https://reviewboard.asterisk.org/r/2728
(closes issue ASTERISK-21976)
Reported by: Denis Guse
Tested by: mjordan, sysreq
patches:
patch-channels-chan__sip.c-393919 uploaded by dennis.guse (license 6513)
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@397243 65c4cc65-6c06-0410-ace0-fbb531ad65f3
In 1.8, r384779 introduced a regression by retrieving an old dialog and keeping
the old recv address since recv was already set. This has caused a problem when
a proxy is involved since responses to incoming requests from the proxy server,
after an outbound call is established, are never sent to the correct recv
address.
In 11, r382322 introduced this regression.
The fix is to revert that change and always store the recv address on incoming
requests.
Thank you Walter Doekes for helping to point out this error and Mark Michelson
for your input/review of the fix.
(closes issue ASTERISK-22071)
Reported by: Alex Zarubin
Tested by: Alex Zarubin, Karsten Wemheuer
Patches:
asterisk-22071-store-recvd-address.diff by Michael L. Young (license 5026)
........
Merged revisions 397204 from http://svn.asterisk.org/svn/asterisk/branches/1.8
........
Merged revisions 397205 from http://svn.asterisk.org/svn/asterisk/branches/11
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@397206 65c4cc65-6c06-0410-ace0-fbb531ad65f3
This removes unused code, event types, IE pltypes, and event IE types
where possible and makes several functions private that were once
public. This includes a renumbering of the remaining event and IE types
which breaks binary compatibility with previous versions. The last
remaining consumers of the old event system (or parts thereof) are
main/security_events.c, res/res_security_log.c, tests/test_cel.c,
tests/test_event.c, main/cel.c, and the CEL backends.
Review: https://reviewboard.asterisk.org/r/2703/
(closes issue ASTERISK-22139)
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@396887 65c4cc65-6c06-0410-ace0-fbb531ad65f3
This makes it so that we can detect failures to originate as with
earlier versions of Asterisk, which restores the Asterisk 11 behavior
for the originate manager action. This was causing the ACL tests for
SIP and IAX2 to fail since those tests expected originate failures
when ACLs would cause rejections. Also, this patch fixes crashes in
chan_sip when ACLs rejected peers during registration verification.
(closes issue ASTERISK-22212)
Reported by: Matt Jordan
Review: https://reviewboard.asterisk.org/r/2753/
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@396498 65c4cc65-6c06-0410-ace0-fbb531ad65f3
If a peer is used in a register line and TLS is defined as the transport, the
registration fails since the transport on the dialog is never set properly
resulting in UDP being used instead of TLS.
This patch sets the dialog's transport based on the transport that was defined
in the register line. If the register line does not specify a transport, the
parsing function for the register line always defaults back to UDP.
(closes issue ASTERISK-21964)
Reported by: Doug Bailey
Tested by: Doug Bailey
Patches:
asterisk-21964-set-reg-dialog-transport.diff
by Michael L. Young (license 5026)
........
Merged revisions 396240 from http://svn.asterisk.org/svn/asterisk/branches/1.8
........
Merged revisions 396248 from http://svn.asterisk.org/svn/asterisk/branches/11
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@396253 65c4cc65-6c06-0410-ace0-fbb531ad65f3
This commit is smaller than the initial review placed on review board. This is because
a change to allow for channel drivers to access parking functionality externally was
committed and invalidated quite a few of the changes initially made.
(closes issue ASTERISK-22039)
reported by Matt Jordan
Review: https://reviewboard.asterisk.org/r/2717
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@396103 65c4cc65-6c06-0410-ace0-fbb531ad65f3
This patch does the following:
* It moves the pickup code out of features.c and into pickup.c
* It removes the vast majority of dead code out of features.c. In particular,
this includes the parking code.
(issue ASTERISK-22134)
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@396060 65c4cc65-6c06-0410-ace0-fbb531ad65f3
This prevents XML documentation duplication by expanding channel and
bridge snapshot tags into channel and bridge snapshot parameter sets
with a given prefix or defaulting to no prefix. This also prevents
documentation from becoming fractured and out of date by keeping all
variations of the documentation in template form such that it only
needs to be updated once and keeps maintenance to a minimum.
Review: https://reviewboard.asterisk.org/r/2708/
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@395985 65c4cc65-6c06-0410-ace0-fbb531ad65f3
In working with res_stasis, I discovered a significant limitation to
the current structure of stasis_caching_topics: you cannot subscribe
to cache updates for a single channel/bridge/endpoint/etc.
To address this, this patch splits the cache away from the
stasis_caching_topic, making it a first class object. The stasis_cache
object is shared amongst individual stasis_caching_topics that are
created per channel/endpoint/etc. These are still forwarded to global
whatever_all_cached topics, so their use from most of the code does
not change.
In making these changes, I noticed that we frequently used a similar
pattern for bridges, endpoints and channels:
single_topic ----------------> all_topic
^
|
single_topic_cached ----+----> all_topic_cached
|
+----> cache
This pattern was extracted as the 'Stasis Caching Pattern', defined in
stasis_caching_pattern.h. This avoids a lot of duplicate code between
the different domain objects.
Since the cache is now disassociated from its upstream caching topics,
this also necessitated a change to how the 'guaranteed' flag worked
for retrieving from a cache. The code for handling the caching
guarantee was extracted into a 'stasis_topic_wait' function, which
works for any stasis_topic.
(closes issue ASTERISK-22002)
Review: https://reviewboard.asterisk.org/r/2672/
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@395954 65c4cc65-6c06-0410-ace0-fbb531ad65f3
This patch makes it so that all registration attempts that fail that
also permanently modify the registration state will raise an appropriate
AMI event.
Note that this patch was forward ported to trunk and the Stasis Core
message bus by mjordan.
(closes issue ASTERISK-21368)
Reported by: Dmitriy Serov
patches:
chan_sip.c.diff uploaded by Demon (license 6479)
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@395907 65c4cc65-6c06-0410-ace0-fbb531ad65f3
This patch renames the bridging* files to bridge*. This may seem pedantic
and silly, but it fits better in line with current Asterisk naming conventions:
* channel is not "channeling"
* monitor is not "monitoring"
etc.
A bridge is an object. It is a first class citizen in Asterisk. "Bridging" is
the act of using a bridge on a set of channels - and the API that fulfills that
role is more than just the action.
(closes issue ASTERISK-22130)
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@395378 65c4cc65-6c06-0410-ace0-fbb531ad65f3
This patch introduces DTLS-SRTP support to chan_pjsip and the options
necessary to configure it including an option to allow choosing between
32 and 80 byte SRTP tag lengths.
During the implementation and testing of this patch, three other bugs
were found and their fixes are included with this patch. The two in
chan_sip were a segfault relating to DTLS setup and mistaken call
rejection. The third bug fix prevents chan_pjsip from attempting to
perform bridge optimization between two endpoints if either of them is
running any form of SRTP.
Review: https://reviewboard.asterisk.org/r/2683/
(closes issue ASTERISK-21419)
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@395121 65c4cc65-6c06-0410-ace0-fbb531ad65f3
This adds CEL support for blind and attended transfers and call pickup.
During the course of adding this functionality I noticed that
CONF_ENTER, CONF_EXIT, and BRIDGE_TO_CONF events are particularly
useless without a bridge identifier, so I added that as well.
This adds tests for blind transfers, several types of attended
transfers, and call pickup.
The extra field in CEL records now consists of a JSON blob whose fields
are defined on a per-event basis.
Review: https://reviewboard.asterisk.org/r/2658/
(closes issue ASTERISK-21565)
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@394858 65c4cc65-6c06-0410-ace0-fbb531ad65f3
Temporary peers do not have an associated Stasis endpoint and quite a
bit of code in chan_sip assumes that all peers have a Stasis endpoint.
All endpoint accesses in chan_sip are now wrapped in an endpoint
NULL-check.
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@394795 65c4cc65-6c06-0410-ace0-fbb531ad65f3
Instead of formatting a NULL pointer into a "%s" format string (which is
usually not a good thing to do), we instead print "Unknown".
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@394278 65c4cc65-6c06-0410-ace0-fbb531ad65f3
This patch does the following:
* It merges Jaco Kroon's patch from ASTERISK-20754, which provides channel
information in the RTCP events. Because Stasis provides a cache, Jaco's
patch was modified to pass the channel uniqueid to the RTP layer as
opposed to a pointer to the channel. This has the following benefits:
(1) It keeps the RTP engine 'clean' of references back to channels
(2) It prevents circular dependencies and other potential ref counting issues
* The RTP engine now allows any RTP implementation to raise RTCP messages.
Potentially, other implementations (such as res_rtp_multicast) could also
raise RTCP information. The engine provides structs to represent RTCP headers
and RTCP SR/RR reports.
* Some general refactoring in res_rtp_asterisk was done to try and tame the
RTCP code. It isn't perfect - that's *way* beyond the scope of this work -
but it does feel marginally better.
* A few random bugs were fixed in the RTCP statistics. (Example: performing an
assignment of a = a is probably not correct)
* We now raise RTCP events for each SR/RR sent/received. Previously we wouldn't
raise an event when we sent a RR report.
Note that this work will be of use to others who want to monitor call quality
or build modules that report call quality statistics. Since the events are now
moving across the Stasis message bus, this is far easier to accomplish. It is
also a first step (though by no means the last step) towards getting Olle's
pinefrog work incorporated.
Again: note that the patch by Jaco Kroon was modified slightly for this work;
however, he did all of the hard work in finding the right places to set the
channel in the RTP engine across the channel drivers. Much thanks goes to Jaco
for his hard work here.
Review: https://reviewboard.asterisk.org/r/2603/
(closes issue ASTERISK-20574)
Reported by: Jaco Kroon
patches:
asterisk-rtcp-channel.patch uploaded by jkroon (License 5671)
(closes issue ASTERISK-21471)
Reported by: Matt Jordan
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@393740 65c4cc65-6c06-0410-ace0-fbb531ad65f3
There was a misunderstanding about ast_bridge_impart()'s handling of the
imparted channel's reference. The channel reference is passed by the
caller unless ast_bridge_impart() returns an error.
* Fixed a memory leak in conf_announce_channel_push() if the impart
failed.
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@392934 65c4cc65-6c06-0410-ace0-fbb531ad65f3
1. Security events
2. Websocket support
3. Diversion header + redirecting support
4. An anonymous endpoint identifier
5. Inbound extension state subscription support
6. PIDF notify generation
7. One touch recording support (special thanks Sean Bright!)
8. Blind and attended transfer support
9. Automatic inbound registration expiration
10. SRTP support
11. Media offer control dialplan function
12. Connected line support
13. SendText() support
14. Qualify support
15. Inband DTMF detection
16. Call and pickup groups
17. Messaging support
Thanks everyone!
Side note: I'm reminded of the song "How Far We've Come" by Matchbox Twenty.
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@392565 65c4cc65-6c06-0410-ace0-fbb531ad65f3
This patch is the initial push to update Asterisk's CDR engine for the new
bridging framework. This patch guts the existing CDR engine and builds the new
on top of messages coming across Stasis. As changes in channel state and bridge
state are detected, CDRs are built and dispatched accordingly. This
fundamentally changes CDRs in a few ways.
(1) CDRs are now *very* reflective of the actual state of channels and bridges.
This means CDRs track well with what an actual channel is doing - which
is useful in transfer scenarios (which were previously difficult to pin
down). It does, however, mean that CDRs cannot be 'fooled'. Previous
behavior in Asterisk allowed for CDR applications, channels, and other
properties to be spoofed in parts of the code - this no longer works.
(2) CDRs have defined behavior in multi-party scenarios. This behavior will not
be what everyone wants, but it is a defined behavior and as such, it is
predictable.
(3) The CDR manipulation functions and applications have been overhauled. Major
changes have been made to ResetCDR and ForkCDR in particular. Many of the
options for these two applications no longer made any sense with the new
framework and the (slightly) more immutable nature of CDRs.
There are a plethora of other changes. For a full description of CDR behavior,
see the CDR specification on the Asterisk wiki.
(closes issue ASTERISK-21196)
Review: https://reviewboard.asterisk.org/r/2486/
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@391947 65c4cc65-6c06-0410-ace0-fbb531ad65f3
Features configuration is handled in its own API in
features_config.h and features_config.c. This way, features
configuration is accessible to anything that needs it.
In addition, features configuration has been altered to
be more channel-oriented. Most callers of features API
code will be supplying a channel so that the individual
channel's settings will be acquired rather than the global
setting.
Missing from this commit is XML documentation for the
features configuration. That will be handled in a separate
commit.
Review: https://reviewboard.asterisk.org/r/2578/
(issue ASTERISK-21542)
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@390751 65c4cc65-6c06-0410-ace0-fbb531ad65f3
The attended transfer API call can complete the attended transfer in a number of ways
depending on the current bridged states of the channels involved.
The hiding of masquerades is done in some bridging-related functions, such as the manager
Bridge action and the Bridge dialplan application. In addition, call pickup was edited
to "move" a channel rather than masquerade it.
Review: https://reviewboard.asterisk.org/r/2511
(closes issue ASTERISK-21334)
Reported by Matt Jordan
(closes issue Asterisk-21336)
Reported by Matt Jordan
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@389848 65c4cc65-6c06-0410-ace0-fbb531ad65f3
This patch moves a number of AMI events over to the Stasis-Core message bus.
This includes:
* ChanSpyStart/Stop
* MonitorStart/Stop
* MusicOnHoldStart/Stop
* FullyBooted/Reload
* All Voicemail/MWI related events
In addition, it adds some Stasis-Core and AMI support for generic AMI messages,
refactors the message router in AMI to use a single router with topic
forwarding for the topics that AMI cares about, and refactors MWI message
types and topics to be more name compliant.
Review: https://reviewboard.asterisk.org/r/2532
(closes issue ASTERISK-21462)
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@389733 65c4cc65-6c06-0410-ace0-fbb531ad65f3
Breaks many things until they can be reworked. A partial list:
chan_agent
chan_dahdi, chan_misdn, chan_iax2 native bridging
app_queue
COLP updates
DTMF attended transfers
Protocol attended transfers
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@389378 65c4cc65-6c06-0410-ace0-fbb531ad65f3
In r388005, macros were introduced to consistently define message
types. This added an assert if a message type was used either before
it was initialized or after it had been cleaned up. It turns out that
this assertion fires during shutdown.
This actually exposed a hidden shutdown ordering problem. Since
unsubscribing is asynchronous, it's possible that the message types
used by the subscription could be freed before the final message of
the subscription was processed.
This patch adds stasis_subscription_join(), which blocks until the
last message has been processed by the subscription. Since joining was
most commonly done right after an unsubscribe, a
stasis_unsubscribe_and_join() convenience function was also added.
Similar functions were also added to the stasis_caching_topic and
stasis_message_router, since they wrap subscriptions and have similar
problems.
Other code in trunk was refactored to join() where appropriate, or at
least verify that the subscription was complete before being
destroyed.
Review: https://reviewboard.asterisk.org/r/2540
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@389011 65c4cc65-6c06-0410-ace0-fbb531ad65f3
The prior code committed, r385473, failed to take into consideration that not
all outgoing calls will be to a peer. My fault.
This patch does the following:
* Check if there is a related peer involved. If there is, check and set NAT
settings according to the peer's settings.
* Fix a problem with realtime peers. If the global setting has auto_force_rport
set and we issued a "sip reload" while a peer is still registered, the peer's
flags for NAT are reset to off. When this happens, we were always setting the
contact address of the peer to that of the full contact info that we had.
(closes issue ASTERISK-21374)
Reported by: jmls
Tested by: Michael L. Young
Patches:
asterisk-21374-fix-crash-and-rt-peers.diff by Michael L. Young (license 5026)
Review: https://reviewboard.asterisk.org/r/2524/
........
Merged revisions 388601 from http://svn.asterisk.org/svn/asterisk/branches/11
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@388602 65c4cc65-6c06-0410-ace0-fbb531ad65f3
An endpoint is an external device/system that may offer/accept
channels to/from Asterisk. While this is a very useful concept for end
users, it is surprisingly not a core concept within Asterisk itself.
This patch defines ast_endpoint as a separate object, which channel
drivers may use to expose their concept of an endpoint. As the channel
driver creates channels, it can use ast_endpoint_add_channel() to
associate channels to the endpoint. This updated the endpoint
appropriately, and forwards all of the channel's events to the
endpoint's topic.
In order to avoid excessive locking on the endpoint object itself, the
mutable state is not accessible via getters. Instead, you can create a
snapshot using ast_endpoint_snapshot_create() to get a consistent
snapshot of the internal state.
This patch also includes a set of topics and messages associated with
endpoints, and implementations of the endpoint-related RESTful
API. chan_sip was updated to create endpoints with SIP peers, but the
state of the endpoints is not updated with the state of the peer.
Along for the ride in this patch is a Stasis test API. This is a
stasis_message_sink object, which can be subscribed to a Stasis
topic. It has functions for blocking while waiting for conditions in
the message sink to be fulfilled.
(closes issue ASTERISK-21421)
Review: https://reviewboard.asterisk.org/r/2492/
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@387932 65c4cc65-6c06-0410-ace0-fbb531ad65f3
RFC6665 4.2.2: ... after a failed State NOTIFY transaction remove the subscription
The problem is that the State Notify requests rely on the 200OK reponse for pacing control
and to not confuse the notify susbsystem.
The issue is, the pendinginvite isn't cleared if a response isn't received,
thus further notify's are never sent.
The solution, follow RFC 6665 4.2.2's 'SHOULD' and remove the subscription after failure.
(closes issue ASTERISK-21677)
Reported by: Dan Martens
Tested by: alecdavis
alecdavis (license 585)
Review https://reviewboard.asterisk.org/r/2475/
........
Merged revisions 387875 from http://svn.asterisk.org/svn/asterisk/branches/1.8
........
Merged revisions 387880 from http://svn.asterisk.org/svn/asterisk/branches/11
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@387885 65c4cc65-6c06-0410-ace0-fbb531ad65f3
RFC 4028 Section 10
if the side not performing refreshes does not receive a
session refresh request before the session expiration, it SHOULD send
a BYE to terminate the session, slightly before the session
expiration. The minimum of 32 seconds and one third of the session
interval is RECOMMENDED.
Prior to this asterisk would refresh at 1/2 the Session-Expires interval,
or if the remote device was the refresher, asterisk would timeout at interval end.
Now, when not refresher, timeout as per RFC noted above.
(closes issue ASTERISK-21742)
Reported by: alecdavis
Tested by: alecdavis
alecdavis (license 585)
Review https://reviewboard.asterisk.org/r/2488/
........
Merged revisions 387344 from http://svn.asterisk.org/svn/asterisk/branches/1.8
........
Merged revisions 387345 from http://svn.asterisk.org/svn/asterisk/branches/11
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@387369 65c4cc65-6c06-0410-ace0-fbb531ad65f3
RFC 4028 Section 7.2
"UACs MUST be prepared to receive a Session-Expires header field in a
response, even if none were present in the request."
What changed
After ASTERISK-20787, inbound calls to asterisk with no Session-Expires in the INVITE are now are offered
a Session-Expires (1800 asterisk default) in the response, with asterisk as the refresher.
Symptom:
After 900 seconds (asterisk default refresher period 1800), asterisk RE-INVITEs the device, the device
may respond with a much lower Session-Expires (180 in our case) value that it is now using.
Asterisk ignores this response, as it's deemed both an INBOUND CALL, and a RE-INVITE.
After 180 seconds the device times out and sends BYE (hangs up), asterisk is still working with the
refresher period of 1800 as it ignored the 'Session Expires: 180' in the previous 200OK response.
Fix:
handle_response_invite() when 200OK, remove check for outbound and reinvite.
(closes issue ASTERISK-21664)
Reported by: alecdavis
Tested by: alecdavis
alecdavis (license 585)
Review https://reviewboard.asterisk.org/r/2463/
........
Merged revisions 387312 from http://svn.asterisk.org/svn/asterisk/branches/1.8
........
Merged revisions 387319 from http://svn.asterisk.org/svn/asterisk/branches/11
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@387327 65c4cc65-6c06-0410-ace0-fbb531ad65f3
When you have lots of SIP peers (according to the issue reporter, around 3500),
the 'sip show peers' CLI command or AMI action can crash due to a poorly placed
string duplication that occurs on the stack. This patch refactors the command
to not allocate the string on the stack, and handles the formatting of a single
peer in a separate function call.
(closes issue ASTERISK-21466)
Reported by: Guillaume Knispel
patches:
fix_sip_show_peers_stack_overflow_asterisk_11.3.0-v2.patch uploaded by gknispel (License 6492)
........
Merged revisions 387134 from http://svn.asterisk.org/svn/asterisk/branches/11
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@387135 65c4cc65-6c06-0410-ace0-fbb531ad65f3
When we reload Asterisk or chan_sip, the flags force_rport and comedia that are
turned on and off when using the auto_force_rport and auto_comedia nat settings
go back to the default setting off. These flags are turned on when needed or
off when not needed at the time that a peer registers, re-registers or initiates
a call. This would apply even when only the default global setting
"nat=auto_force_rport" is being used, which in this case would only affect the
force_rport flag.
Everything is good except for the following: The nat setting is set to
auto_force_rport and auto_comedia. We reload Asterisk and the peer's
registration has not expired. We load in the settings for the peer which turns
force_rport and comedia back to off. Since the peer has not re-registered or
placed a call yet, those flags remain off. We then initiate a call to the peer
from the PBX. The force_rport and comedia flags stay off. If NAT is involved,
we end up with one-way audio since we never checked to see if the peer is behind
NAT or not.
This patch does the following:
* Moves the checking of whether a peer is behind NAT into its own function
* Create a function to set the peer's NAT flags if they are using the auto_* NAT
settings
* Adds calls in sip_request_call() to these new functions in order to setup the
dialog according to the peer's settings
(closes issue ASTERISK-21374)
Reported by: Michael L. Young
Tested by: Michael L. Young
Patches:
asterisk-21374-auto-nat-outgoing-fix_v2.diff Michael L. Young (license 5026)
Review: https://reviewboard.asterisk.org/r/2421/
........
Merged revisions 385473 from http://svn.asterisk.org/svn/asterisk/branches/11
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@385474 65c4cc65-6c06-0410-ace0-fbb531ad65f3
When a BYE request is processed in chan_sip, the current SIP dialog is detached
from its associated Asterisk channel structure. The tech_pvt pointer in the
channel object is set to NULL, and the dialog persists for an RFC mandated
period of time to handle re-transmits.
While this process occurs, the channel is locked (which is good).
Unfortunately, operations that are initiated externally have no way of knowing
that the channel they've just obtained (which is still valid) and that they are
attempting to lock is about to have its tech_pvt pointer removed. By the time
they obtain the channel lock and call the channel technology callback, the
tech_pvt is NULL.
This patch adds a few checks to some channel callbacks that make sure the
tech_pvt isn't NULL before using it. Prime offenders were the DTMF digit
callbacks, which would crash if AMI initiated a DTMF on the channel at the
same time as a BYE was received from the UA. This patch also adds checks on
sip_transfer (as AMI can also cause a callback into this function), as well
as sip_indicate (as lots of things can queue an indication onto a channel).
Review: https://reviewboard.asterisk.org/r/2434/
(closes issue ASTERISK-20225)
Reported by: Jeff Hoppe
........
Merged revisions 385170 from http://svn.asterisk.org/svn/asterisk/branches/1.8
........
Merged revisions 385173 from http://svn.asterisk.org/svn/asterisk/branches/11
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@385174 65c4cc65-6c06-0410-ace0-fbb531ad65f3
The initial report was that the "nat" setting in the [general] section was not
having any effect in overriding the default setting. Upon confirming that this
was happening and looking into what was causing this, it was discovered that
other default settings would not be overriden as well.
This patch works similar to what occurs in build_peer(). We create a temporary
ast_flags structure and using a mask, we override the default settings with
whatever is set in the [general] section.
In the bug report, the reporter who helped to test this patch noted that the
directmedia settings were being overriden properly as well as the nat settings.
This issue is also present in Asterisk 1.8 and a separate patch will be applied
to it.
(issue ASTERISK-21225)
Reported by: Alexandre Vezina
Tested by: Alexandre Vezina, Michael L. Young
Patches:
asterisk-21225-handle-options-default-prob_v4.diff
Michael L. Young (license 5026)
Review: https://reviewboard.asterisk.org/r/2385/
........
Merged revisions 384827 from http://svn.asterisk.org/svn/asterisk/branches/11
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@384828 65c4cc65-6c06-0410-ace0-fbb531ad65f3
When authenticating a SIP request with alwaysauthreject enabled, allowguest
disabled, and autocreatepeer disabled, Asterisk discloses whether a user
exists for INVITE, SUBSCRIBE, and REGISTER transactions in multiple ways. The
information is disclosed when:
* A "407 Proxy Authentication Required" response is sent instead of a
"401 Unauthorized" response
* The presence or absence of additional tags occurs at the end of "403
Forbidden" (such as "(Bad Auth)")
* A "401 Unauthorized" response is sent instead of "403 Forbidden" response
after a retransmission
* Retransmission are sent when a matching peer did not exist, but not when a
matching peer did exist.
This patch resolves these various vectors by ensuring that the responses sent
in all scenarios is the same, regardless of the presence of a matching peer.
This issue was reported by Walter Doekes, OSSO B.V. A substantial portion of
the testing and the solution to this problem was done by Walter as well - a
huge thanks to his tireless efforts in finding all the ways in which this
setting didn't work, providing automated tests, and working with Kinsey on
getting this fixed.
(closes issue ASTERISK-21013)
Reported by: wdoekes
Tested by: wdoekes, kmoore
patches:
AST-2013-003-1.8 uploaded by kmoore, wdoekes (License 6273, 5674)
AST-2013-003-10 uploaded by kmoore, wdoekes (License 6273, 5674)
AST-2013-003-11 uploaded by kmoore, wdoekes (License 6273, 5674)
........
Merged revisions 384003 from http://svn.asterisk.org/svn/asterisk/branches/11
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@384019 65c4cc65-6c06-0410-ace0-fbb531ad65f3
In r373424, several reentrancy problems in chan_sip were addressed. As a
result, the SIP channel driver is now properly locking the channel driver
private information in certain operations that it wasn't previously. This
exposed two latent problems either in register_verify or by functions called
by register_verify. This includes:
* Holding the private lock while calling sip_send_mwi_to_peer. This can create
a new sip_pvt via sip_alloc, which will obtain the channel container lock.
This is a locking inversion, as any channel related lock must be obtained
prior to obtaining the SIP channel technology private lock.
Note that this issue was already fixed in Asterisk 11.
* Holding the private lock while calling sip_poke_peer. In the same vein as
sip_send_mwi_to_peer, sip_poke_peer can create a new SIP private, causing
the same locking inversion.
Note that this locking inversion typically occured when CLI commands were run
while a SIP REGISTER request was being processed, as many CLI commands (such
as 'sip show channels', 'core show channels', etc.) have to obtain the channel
container lock.
(issue ASTERISK-21068)
Reported by: Nicolas Bouliane
(issue ASTERISK-20550)
Reported by: David Brillert
(issue ASTERISK-21314)
Reported by: Badalian Vyacheslav
(issue ASTERISK-21296)
Reported by: Gabriel Birke
........
Merged revisions 383863 from http://svn.asterisk.org/svn/asterisk/branches/1.8
........
Merged revisions 383878 from http://svn.asterisk.org/svn/asterisk/branches/11
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@383879 65c4cc65-6c06-0410-ace0-fbb531ad65f3
Remove MWI's dependency on the event system by moving it to
Stasis-core. This also introduces forwarding topic pools in Stasis-core
which aggregate many dynamically allocated topics into a single primary
topic.
Review: https://reviewboard.asterisk.org/r/2368/
(closes issue ASTERISK-21097)
Patch-by: Kinsey Moore
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@383284 65c4cc65-6c06-0410-ace0-fbb531ad65f3
AMI, HTTP, and chan_sip all support TLS in some way, but none of them
support all the options that Asterisk's TLS core is capable of
interpreting. This prevents consumers of the TLS/SSL layer from setting
TLS/SSL options that they do not support.
This also gets tlsverifyclient closer to a working state by requesting
the client certificate when tlsverifyclient is set. Currently, there is
no consumer of main/tcptls.c in Asterisk that supports this feature and
so it can not be properly tested.
Review: https://reviewboard.asterisk.org/r/2370/
Reported-by: John Bigelow
Patch-by: Kinsey Moore
(closes issue AST-1093)
........
Merged revisions 383165 from http://svn.asterisk.org/svn/asterisk/branches/1.8
........
Merged revisions 383166 from http://svn.asterisk.org/svn/asterisk/branches/11
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@383167 65c4cc65-6c06-0410-ace0-fbb531ad65f3
When a session timer expires during a dialog that has re-negotiated to T.38
and Asterisk is the refresher, Asterisk will send a re-INVITE with an SDP
containing audio media only. This causes some hilarity with the poor fax
session under weigh.
This patch corrects that by sending T.38 parameters if we are in the middle of
a T.38 session.
(closes issue ASTERISK-21232)
Reported by: Nitesh Bansal
patches:
dont-send-audio-reinvite-for-sess-timer-in-t38-call.patch uploaded by nbansal (License 6418)
........
Merged revisions 383124 from http://svn.asterisk.org/svn/asterisk/branches/1.8
........
Merged revisions 383125 from http://svn.asterisk.org/svn/asterisk/branches/11
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@383126 65c4cc65-6c06-0410-ace0-fbb531ad65f3
In ASTERISK-17888, the AMI Registry event during SIP registrations was supposed
to include the Username field. Somehow, one of the events was missed. This
patch corrects that - the Username field should be included in all AMI Registry
events involving SIP registrations.
(issue ASTERISK-17888)
(closes issue ASTERISK-21201)
Reported by: Dmitriy Serov
patches:
chan_sip.c.diff uploaded by Dmitriy Serov (license 6479)
........
Merged revisions 382847 from http://svn.asterisk.org/svn/asterisk/branches/1.8
........
Merged revisions 382848 from http://svn.asterisk.org/svn/asterisk/branches/11
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@382852 65c4cc65-6c06-0410-ace0-fbb531ad65f3
Added an option "discard_remote_hold_retrieval" (default "no") that if set does
not trigger the music on hold event. This essentially stops telling the peer
to start music on hold.
(issue ABE-2899)
Reported by: Denis Alberto Martinez
Review: https://reviewboard.asterisk.org/r/2336/
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@382787 65c4cc65-6c06-0410-ace0-fbb531ad65f3
Prior to this change, certain conditions for sending the message would
result in an address of '(null)' being used in the via header of the
SIP message because a NULl value of pvt->ourip was used when initially
generating the via header. This is fixed by adding a call to build_via
when the address is set before sending the message.
(closes issue ASTERISK-21148)
Reported by: Zhi Cheng
Patches:
700-sip_msg_send_via_fix.patch uploaded by Zhi Cheng (license 6475)
........
Merged revisions 382739 from http://svn.asterisk.org/svn/asterisk/branches/11
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@382746 65c4cc65-6c06-0410-ace0-fbb531ad65f3
Originally, way back in r201583, we added the alternate RTP address so
that the RTP engine would expect to receive audio from a new source
when a glare re-INVITE occurred. In r382589, we remove the alternate
RTP source, as the 'secret' probation mode allows for switching to a new
RTP source when a previous source stops sending RTP. At the time, it
seemed appropriate to set the RTP source based on the information in the
glared re-INVITE.
Unfortunately, that doesn't work so well - in a glared re-INVITE that occurs
with no SDP - such as in a connected line update that glances - we'll set
the RTP source to an invalid address. In subsequent re-INVITE requests from
this Asterisk instance, we'll then send an invalid media address, which will
result in the remote side sending a 488. Whoops.
There isn't any need to reset the RTP source - if we're using strictrtp, we'll
simply synchronize to a new source when we stop getting packets from the old
one. If we aren't using strictrtp, then again there shouldn't be a problem.
Note that the Asterisk Test Suite's connectedline test caught this error.
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@382670 65c4cc65-6c06-0410-ace0-fbb531ad65f3
Often, Asterisk may realize that a change in the source of an RTP stream is
about to occur and ask that the RTP engine reset it's lock on the current RTP
source. In certain scenarios, it may take awhile for the new remote system to
send RTP packets, while the old remote system may continue providing RTP during
that time period. This causes Asterisk to re-lock onto the old source, thereby
rejecting the new source when the old source stops sending RTP and the new
source begins.
This patch prevents that by having a constant secondary, 'secret' probation
mode enabled when an RTP source has been chosen. RTP packets from other sources
are always considered, but never chosen unless the current RTP source stops
sending RTP.
Review: https://reviewboard.asterisk.org/r/2364
(closes issue AST-1124)
Reported by: John Bigelow
Tested by: John Bigelow
(closes issue AST-1125)
Reported by: John Bigelow
Tested by: John Bigelow
........
Merged revisions 382573 from http://svn.asterisk.org/svn/asterisk/branches/11
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@382589 65c4cc65-6c06-0410-ace0-fbb531ad65f3
This patch adds support for RFC 3327 "Path" headers. This can be enabled in
sip.conf using the 'supportpath' setting, either on a global basis or on a
peer basis. This setting enables Asterisk to route outgoing out-of-dialog
requests via a set of proxies by using a pre-loaded route-set defined by the
Path headers in the REGISTER request. This patch also adds Realtime support
for dynamically updating the Path information for a peer.
A huge thank-you to Klaus Darillion and Olle E Johansson for their efforts
in writing this patch.
Review: https://reviewboard.asterisk.org/r/2235/
Review: https://reviewboard.asterisk.org/r/991/
(closes issue ASTERISK-16884)
Reported by: klaus3000
Tested by: klaus3000, oej, mjordan
patches:
path-1.8.0-patch.txt uploaded by klaus3000 (License 5054)
oolong-path-support-trunk in team branch by oej (License 5267)
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@382440 65c4cc65-6c06-0410-ace0-fbb531ad65f3
The original report had to do with a realtime peer behind NAT being pruned and
the peer's private address being used instead of its external address. Upon
debugging, it was discovered that this was being caused by the addition of
the auto_force_rport and auto_comedia settings.
This patch does the following:
* Adds a missing note to the CHANGES file indicating that the default global nat
setting is auto_force_rport
* Constify the 'req' parameter for check_via()
* Add calls to check_via() in a couple of places in order for the auto_*
settings to do their job in attempting to determine if NAT is involved
* Set the flags SIP_NAT_FORCE_RPORT and SIP_PAGE2_SYMMETRICRTP if the auto_*
settings are in use where it was needed
* Moves the copying of peer flags up in build_peer() to before they are used;
this fixes the realtime prune issue
* Update the contrib/realtime schemas to allow the nat column to handle the
different nat setting combinations we have
This patch received a review and "Ship It!" on the issue itself.
(closes issue ASTERISK-20904)
Reported by: JoshE
Tested by: JoshE, Michael L. Young
Patches:
asterisk-20904-nat-auto-and-rt-peersv2.diff Michael L. Young (license 5026)
........
Merged revisions 382322 from http://svn.asterisk.org/svn/asterisk/branches/11
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@382323 65c4cc65-6c06-0410-ace0-fbb531ad65f3
Previously, presencestate information was sent whenever the state was not
NOT_SET. When r381594 actually returned INVALID presence state in all the
places it was supposed to, it caused chan_sip to start adding presence
state information to NOTIFY requests that it previously would not have
added. chan_sip shouldn't be adding presence state information when the
provider is in an invalid state; users can't set the state to invalid and
an invalid state always implies that the provider is in an error condition.
(issue AST-1084)
........
Merged revisions 381613 from http://svn.asterisk.org/svn/asterisk/branches/11
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@381615 65c4cc65-6c06-0410-ace0-fbb531ad65f3
Reference counting for the channel and its tech_pvt got messed up at
some point between 1.8 and 11. The result was that if a BYE for a dialog
that had been replaced (via an INVITE with Replaces) was received, Asterisk
would crash due to trying to access data on a channel that was no longer there.
The fix I introduced is to remove code that both unrefs the sip_pvt and sets
the channel's tech_pvt to NULL when an INVITE with Replaces is handled. This
way when a BYE is received, the tech_pvt will be non-NULL and so the BYE can
be processed and not cause a crash.
(closes issue ASTERISK-20929)
reported by Kristopher Lalletti
patches:
ASTERISK-20929.patch uploaded by Mark Michelson (License #5049)
........
Merged revisions 381566 from http://svn.asterisk.org/svn/asterisk/branches/11
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@381568 65c4cc65-6c06-0410-ace0-fbb531ad65f3
Some bad copy/pasting resulted in using the audio crypto attribute for both
text and video RTP. Also the audio crypto isn't set until after these, so it
was really just bad all around.
(closes ASTERISK-20905)
Reported by: Kristopher Lalletti
patches:
rtp_crypto_video_text.diff uploaded by Jonathan Rose (license 6182)
........
Merged revisions 381553 from http://svn.asterisk.org/svn/asterisk/branches/11
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@381556 65c4cc65-6c06-0410-ace0-fbb531ad65f3
When sip_ref_peer and sip_unref_peer were exported to be usable in
channels/sip/security_events.c, modifications to those functions when
building under REF_DEBUG were not taken into account. This change
moves the necessary defines into sip.h to make them accessible to
other parts of chan_sip that need them.
........
Merged revisions 381282 from http://svn.asterisk.org/svn/asterisk/branches/11
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@381285 65c4cc65-6c06-0410-ace0-fbb531ad65f3
Previously, Asterisk only processed session timer information if both the
'Supported: timer' and 'Session-Expires' headers were present. However, the
Session-Expires header is optional. If we were to receive a request with a
Min-SE greater than our configured session-expires, we would respond with a
'Session-Expires' header that was too small.
This patch cleans the situation up a bit, always processing timer information
if the 'Supported: timer' header is present.
(closes issue ASTERISK-20787)
Reported by: Mark Michelson
Review: https://reviewboard.asterisk.org/r/2299/
........
Merged revisions 380696 from http://svn.asterisk.org/svn/asterisk/branches/1.8
........
Merged revisions 380698 from http://svn.asterisk.org/svn/asterisk/branches/11
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@380699 65c4cc65-6c06-0410-ace0-fbb531ad65f3
A user in #asterisk ran into a problem where a configuration error prevented
the chan_sip module from being loaded. Upon fixing their configuratione error,
they could no longer load the chan_sip module. This was because the
configuration checking happened after the SIP provider was registered with the
Asterisk core, and subsequent attempts to load the SIP module failed as the
provider was already registered.
Since we want to detect any failure in registering chan_sip as early as
possible (as that could be emblematic of a deeper mismatch between module
and Asterisk core), this patch does not change the registration location, but
does ensure that if a module load is declined, we unregister the module as
the SIP api provider.
........
Merged revisions 380480 from http://svn.asterisk.org/svn/asterisk/branches/11
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@380500 65c4cc65-6c06-0410-ace0-fbb531ad65f3
Richard Mudgett
Matthew Jordan
Mark Michelson
Kevin Harwell
Walter Doekes
Joshua Colp
Corey Farrell
Scott Griepentrog
Kinsey Moore
Jonathan Rose
Sean Bright
Rusty Newton
Russell Bryant
David M. Lee
Michael L. Young
Jason Parker
Alec L Davis