asterisk

Commit Graph

Author	SHA1	Message	Date
George Joseph	a6610fbe2f	build: Fix ast_sockaddr initialization to be more portable A change to glibc 2.22 changed the order of the sockadddr_storage members which caused the places where we do an initialization of ast_sockaddr with '{ { 0, 0, } }' to fail compilation. Those initializers (which we shouldn't have been using anyway) have been replaced with memsets. Change-Id: Idd1b3b320903d8771bfe221f0b015685de628fa4	9 years ago
Richard Mudgett	d9ab222edc	res_rtp_multicast.c: Fix warning message typo. Change-Id: Ic9928208b9957e09866abe3d9649030942ec52b3	9 years ago
Richard Mudgett	39329a9e66	chan_rtp: Backport changes from master. * Deprecate chan_multicast_rtp. Change-Id: Ib5a45e58c75ee8abd0b4f9575379b5321feb853e	9 years ago
Richard Mudgett	6d45341963	chan_rtp.c: Copy file from chan_multicast_rtp.c Change-Id: I1119b53f2152ab1cbec74b5be7ea44844dbda8ef	9 years ago
Richard Mudgett	0322479ff7	res_pjsip_registrar.c: Eliminate rx REGISTER request race condition. This patch fixes a race condition processing received REGISTER requests and their retransmissions caused by REGISTER requests being processed by two threads. The "sip_transaction Unable to register REGISTER transaction (key exists)" message is a notable symptom of this issue. This issue was more likely to happen before the pjsip/distributor serializers were created. Instead of steps one and two below placing the REGISTER messages into the same pjsip/distributor they were placed in random pjsip/default serializers. 1) REGISTER requests come in and get placed on the pjsip/distributor serializer. 2) Before the first request is processed a retransmission comes in and is placed on the same pjsip/distributor serializer. 3) The first request goes up the pjsip stack and is then shunted off to the pjsip/aor/<aor> serializer. 4) Before the first request is completed processing in the pjsip/aor/<aor> serializer, the second request goes up the pjsip stack and is also shunted off to the pjsip/aor/<aor> serializer. 5) The first request completes processing and sends out its response. 6) The second request completes processing and tries to send out its response but pjlib complains that the REGISTER transaction key already exists. 7) Sadness ensues. * The race is eliminated by removing the pjsip/aor/<aor> serializer and continuing the processing in the pjsip/distributor serializer. Now any retransmissions queued in the pjsip/distributor serializer will be processed after the first message is completely processed. ASTERISK-26088 #close Reported by: Richard Mudgett Change-Id: I842d714346088bf717ea27437f1dd85bff0bab5a	9 years ago
Richard Mudgett	942fa0c95b	stasis: Add setting subscription congestion levels. Stasis subscriptions and message routers create taskprocessors to process the event messages. API calls are needed to be able to set the congestion levels of these taskprocessors for selected subscriptions and message routers. * Updated CDR, CEL, and manager's stasis subscription congestion levels based upon stress testing. Increased the congestion levels to reduce the potential for bursty call setup/teardown activity from triggering the taskprocessor overload alert. CDRs in particular need an extra high congestion level because they can take awhile to process the stasis messages. ASTERISK-26088 Reported by: Richard Mudgett Change-Id: Id0a716394b4eee746dd158acc63d703902450244	9 years ago
Richard Mudgett	b046fa1907	sorcery: Add setting object type congestion levels. Sorcery creates taskprocessors for object types to process object observer callbacks. An API call is needed to be able to set the congestion levels of these taskprocessors for selected object types. * Updated PJSIP's contact and contact_status sorcery object type observer default congestion levels based upon stress testing. Increased the congestion levels to reduce the potential for bursty register/unregister and subscribe/unsubscribe activity from triggering the taskprocessor overload alert. ASTERISK-26088 Reported by: Richard Mudgett Change-Id: I4542e83b556f0714009bfeff89505c801f1218c6	9 years ago
Richard Mudgett	237f9ef7af	taskprocessors: Implement high/low water mark alerts. When taskprocessors get backed up, there is a good chance that we are being overloaded and need to defer adding new work to the system. * Implemented a high/low water alert mechanism for modules to check if the system is being overloaded and take appropriate action. When a taskprocessor is created it has default congestion levels set. A taskprocessor can later have those congestion levels altered for specific needs if stress testing shows that the taskprocessor is a symptom of overloading or needs to handle bursty activity without triggering an overload alert. * Add CLI "core show taskprocessor" low/high water columns. * Fixed __allocate_taskprocessor() to not use RAII_VAR(). RAII_VAR() was never a good thing to use when creating a taskprocessor because of the nature of how its references needed to be cleaned up on a partial creation. * Made res_pjsip's distributor check if the taskprocessor overload alert is active before placing a message representing brand new work onto a distributor serializer. ASTERISK-26088 Reported by: Richard Mudgett Change-Id: I182f1be603529cd665958661c4c05ff9901825fa	9 years ago
Richard Mudgett	ff70f04a37	res_pjsip_session: Use distributor serializer for incoming calls. We must continue using the serializer that the original INVITE came in on for the dialog. There may be retransmissions already enqueued in the original serializer that can result in reentrancy and message sequencing problems. Outgoing call legs create the pjsip/outsess/<endpoint> serializers for their dialogs. ASTERISK-26088 Reported by: Richard Mudgett Change-Id: I24d7948749c582b8045d5389ba3f6588508adbbc	9 years ago
Richard Mudgett	4b26c9ead8	res_pjsip_pubsub.c: Recreate subscriptions using distributor serializer. * Resolves potential reentrancy problems if system restarted in the middle of subscription message transactions. * Fixes memory leak recreating persistent subscriptions when the subscription resource tree could not be created. ASTERISK-26088 Reported by: Richard Mudgett Change-Id: I71e34d7ae8ed35a694f1030e820e2548c48697be	9 years ago
Richard Mudgett	a137d1822e	res_pjsip_pubsub.c: Use distributor serializer for incoming subscriptions. We must continue using the serializer that the original SUBSCRIBE came in on for the dialog. There may be retransmissions already enqueued in the original serializer that can result in reentrancy and message sequencing problems. The "sip_transaction Unable to register SUBSCRIBE transaction (key exists)" message is a notable symptom of this issue. Outgoing subscriptions still create the pjsip/pubsub/<endpoint> serializers for their dialogs. ASTERISK-26088 Reported by: Richard Mudgett Change-Id: I18b00bb74a56747b2c8c29543a82440b110bf0b0	9 years ago
Richard Mudgett	9a7a5aec18	pjsip_distributor.c: Consistently pick a serializer for messages. Incoming messages that are not part of a dialog or a recognized response to one of our requests need to be sent to a consistent serializer. Under load we may be queueing retransmissions before we can process the original message. We don't need to throw these messages onto random serializers and cause reentrancy and message sequencing problems. * Created a pool of pjsip/distributor serializers that get picked by hashing the call-id and remote tag strings of the received messages. * Made ast_sip_destroy_distributor() destroy items in the reverse order of creation. ASTERISK-26088 Reported by: Richard Mudgett Change-Id: I2ce769389fc060d9f379977f559026fbcb632407	9 years ago
Richard Mudgett	f2a76c4292	pjsip_distributor.c: Ignore messages until fully booted. We should not be processing any incoming messages until we are fully booted. We may not have dialplan or other needed configuration loaded yet. ASTERISK-26089 #close Reported by: Scott Griepentrog ASTERISK-26088 Reported by: Richard Mudgett Change-Id: I584aefb4f34b885a8927e1f13a2c64babd606264	9 years ago
George Joseph	51e45e5ca5	res_pjsip contact: Lock expiration/addition of contacts Contact expiration can occur in several places: res_pjsip_registrar, res_pjsip_registrar_expire, and automatically when anyone calls ast_sip_location_retrieve_aor_contact. At the same time, res_pjsip_registrar may also be attempting to renew or add a contact. Since none of this was locked it was possible for one thread to be renewing a contact and another thread to expire it immediately because it was working off of stale data. This was the casue of intermittent registration/inbound/nominal/multiple_contacts test failures. Now, the new named lock functionality is used to lock the aor during contact expire and add operations and res_pjsip_registrar_expire now checks the expiration with the lock held before deleting the contact. ASTERISK-25885 #close Reported-by: Josh Colp Change-Id: I83d413c46a47796f3ab052ca3b349f21cca47059	9 years ago
George Joseph	880d502141	lock: Add named lock capability Locking some objects like sorcery objects can be tricky because the underlying ao2 object may not be the same for all callers. For instance, two threads that call ast_sorcery_retrieve_by_id on the same aor name might actually get 2 different ao2 objects if the underlying wizard had to rehydrate the aor from a database. Locking one ao2 object doesn't have any effect on the other even if those objects had locks in the first place. Named locks allow access control by keyspace and key strings. Now an "aor" named "1000" can be locked and any other thread attempting to lock "aor" "1000" will wait regardless of whether the underlying ao2 object is the same or not. Mutex and rwlocks are supported. This capability will initially be used to lock an aor when multiple threads may be attempting to prune expired contacts from it. Change-Id: If258c0b7f92b02d07243ce70e535821a1ea7fb45	9 years ago
Joshua Colp	a81feefde9	res_odbc: Implement a connection pool. Testing has shown that our usage of UnixODBC is problematic due to bugs within UnixODBC itself as well as the heavy weight cost of connecting and disconnecting database connections, even when pooling is enabled. For users of UnixODBC 2.3.1 and earlier crashes would occur due to insufficient protection of the disconnect operation. This was fixed in UnixODBC 2.3.2 and above. For users of UnixODBC 2.3.3 and higher a slow-down would occur under heavy database use due to repeated connection establishment. A regression is present where on each connection the database configuration is cached again, with the cache growing out of control. The connection pool implementation present in this change helps to mitigate these issues by reducing how much we connect and disconnect database connections. We also solve the issue of crashes under UnixODBC 2.3.1 by defaulting the maximum number of connections to 1, returning us to the previous working behavior. For users who may have a fixed version the maximum concurrent connection limit can be increased helping with performance. The connection pool works by keeping a list of active connections. If the connection limit has not been reached a new connection is established. If the connection limit has been reached then the request waits until a connection becomes available before continuing. ASTERISK-26074 #close ASTERISK-26054 #close Change-Id: I6774bf4bac49a0b30242c76a09c403d2e856ecff	9 years ago
George Joseph	aab8bc5d31	pjproject_bundled: Move to pjproject 2.5 Although all the patches we had against 2.4.5 were applied by Teluu, a new bug was introduced preventing re-use of tcp and tls transports This patch removes all the previous patches against 2.4.5, updates the version to 2.5, and adds a new patch to correct the transport re-use problem. Change-Id: I0dc6c438c3910f7887418a5832ca186aea23d068 (cherry picked from commit `e8abfdcdc5`)	9 years ago
zuul	942870160f	Merge "udptl: Don't eat sequence numbers until OK is received" into certified/13.8	9 years ago
George Joseph	b9a28ccbd4	udptl: Don't eat sequence numbers until OK is received Scenario: Local fax -> Asterisk w/ firewall -> Provider -> Remote fax * Local fax starts rtp call to remote fax * Remote fax starts t38 call back to local fax. * Local fax sends t38 no-signal to Asterisk before sending an OK. * udptl processes the frame and increments the expected sequence number. * chan_sip drops the frame because the call isn't up so nothing goes out the external interface to open the port for incoming packets. * Local fax sends OK and Asterisk sends OK to the remote fax. * Remote fax sends t38 packets which are dropped by the firewall. * Local fax re-sends t38 no-signal with the same sequence number. * udptl drops the frame because it thinks it's a dup. * Still no outgoing packets to open the firewall. * t38 negotiation fails. The patch drops frames t38 received before udptl sequence processing when the call hasn't been answered yet. The second no-signal frame is then seen as new and is relayed out the external interface which opens the port and allows negotiation to continue. ASTERISK-26034 #close Change-Id: I11744b39748bd2ecbbe8ea84cdb4f3c5943c5af9	9 years ago
George Joseph	f85c77a9e1	chan_sip: Prevent extra Session-Expires headers from being added When chan_sip does a re-INVITE to refresh a session and authentication is required, the INVITE with the Authorization header containes a second Session-Expires header without the ";refersher=" parameter. This is causing some proxies to return a 400. Also, when Asterisk is the uas and the refresher, it is including the Session-Expires and Min-SE headers in OPTIONS messages which is not allowed per RFC4028. This patch (based on the reporter's) Checks to see if a Session-Expires header is already in the message before adding another one. It also checks that the method is INVITE or UPDATE. ASTERISK-26030 #close Change-Id: I58a7b07bab5a3177748d8a7034fb8ad8e11ce1d9	9 years ago
George Joseph	8bf050b853	config_transport: Tell pjproject to allow all SSL/TLS protocols The default tls settings for pjproject only allow TLS 1, TLS 1.1 and TLS 1.2. SSL is not allowed. So, even if you specify "sslv3" for a transport method, it's silently ignored and one of the TLS protocols is used. This was a new behavior of pjsip_tls_setting_default() in 2.4 (when tls.proto was added) that we never caught. Now we need to set tls.proto = 0 after we call pjsip_tls_setting_default(). This tells pjproject to set the socket protocol to match the method. ASTERISK-26004 #close Change-Id: Icfb55c1ebe921298dedb4b1a1d3bdc3ca41dd078	9 years ago
Kevin Harwell	4fc2c98369	res_pjsip_authenticator_digest: Don't use source port in nonce verification From the issue reporter: "res_pjsip_outbound_authenticator_digest builds a nonce that is a hash of the timestamp, the source address, the source port, a server UUID that is calculated at startup, and the authentication realm. Rather than caching nonces that we create, we instead attempt to re-calculate the nonce when receiving an incoming request with authentication. We then compare the re-calculated nonce to the incoming nonce, and if they don't match, then authentication has failed early. The problem is that it is possible, especially when using TCP, to receive two requests from the same endpoint but have differing source ports for those requests. Asterisk itself commonly will use different source ports for outbound TCP requests." This patch removes the source port dependency when building the nonce. ASTERISK-25978 #close Change-Id: I871b5f4adce102df1c4988066283095ec509dffe	9 years ago
Joshua Colp	4e7791d483	file: Ensure nativeformats remains valid for lifetime of use. It is possible for the nativeformats of a channel to change throughout its lifetime. As a result a user of it needs to either ensure the channel is locked when accessing the formats or keep a reference to the nativeformats themselves. This change fixes the file playback support so it keeps a reference to the nativeformats when accessing things. ASTERISK-25998 #close Change-Id: Ie45b65475e1481ddf05b874ee48f63e39fff8915	9 years ago
Joshua Colp	601602f44b	ChangeLog: Updated for certified/13.8-cert1-rc2	9 years ago
Joshua Colp	13461bb9a6	Release summaries: Add summaries for certified/13.8-cert1-rc2	9 years ago
Joshua Colp	cadb5c4e64	Release summaries: Remove previous versions	9 years ago
Joshua Colp	d4d5548ef8	.version: Update for certified/13.8-cert1-rc2	9 years ago
Joshua Colp	a5bc40ae51	.lastclean: Update for certified/13.8-cert1-rc2	9 years ago
Joshua Colp	2b6df52c66	realtime: Add database scripts for certified/13.8-cert1-rc2	9 years ago
Alexei Gradinari	c4426f1035	res_pjsip: disable multi domain to improve realtime performace This patch added new global pjsip option 'disable_multi_domain'. Disabling Multi Domain can improve Realtime performance by reducing number of database requests. ASTERISK-25930 #close Change-Id: I2e7160f3aae68475d52742107949a799aa2c7dc7	9 years ago
Joshua Colp	c69e0f1813	app_queue: Fix crash when unloading module. When unloading the app_queue module the members in each queue are destroyed and as part of this they are removed from the pending members container. Unfortunately a crash would occur as the container was destroyed before the members were removed. This change tweaks ordering so the container destruction occurs after the members are destroyed. ASTERISK-16115 Change-Id: I48c728668c55aee3d05b751a5d450fb57e87f44b	9 years ago
Joshua Colp	a95dbe6fee	Merge "app_queue: queue members can receive multiple calls" into certified/13.8	9 years ago
Kevin Harwell	eebe8b3dd3	app_queue: queue members can receive multiple calls It was possible for a queue member that is a member of at least 2 or more queues to receive mulitiple calls at the same time. This happened because of a race between when a member was being rung and when the device state notified the other queue(s) member object of the state change. This patch makes it so when a queue member is being rung it gets added to a global pool of queue members. If that same member is tried again, e.g. from another queue, and it is found to already exist in the pending member container then it will not ring that member. ASTERISK-16115 #close Change-Id: I546dd474776d158c2b6be44205353dee5bac7e48	9 years ago
George Joseph	5cbd4b9799	res_agi: Prevent run_agi from eating frames it shouldn't The run_agi function is eating control frames when it shouldn't be. This is causing issues when an AGI is run from CONNECTED_LINE_SEND_SUB in a blond transfer. Alice calls Bob. Bob attended transfers to Charlie but hangs up before Charlie answers. Alice gets the COLP UPDATE indicating Charlie but Charlie never gets an UPDATE and is left thinking he's connected to Bob. In this case, when CONNECTED_LINE_SEND_SUB runs on Alice's channel and it calls an AGI, the extra eaten frames prevent CONNECTED_LINE_SEND_SUB from running on Charlie's channel. The fix was to accumulate deferrable frames in the "forever" loop instead of dropping them, and re-queue them just before running the actual agi command or exiting. ASTERISK-25951 #close Change-Id: I0f4bbfd72fc1126c2aaba41da3233a33d0433645	9 years ago
zuul	7a18ebaa0c	Merge "res_stasis: Handle re-enter stasis bridge with swap channel." into certified/13.8	9 years ago
zuul	35f9b6f38b	Merge "bridge: Hold off more than one imparting channel at a time." into certified/13.8	9 years ago
Richard Mudgett	bc51227ef8	res_stasis: Handle re-enter stasis bridge with swap channel. We lose the fact that there is a swap channel if there is one. We currently wind up rejoining the stasis bridge as a normal join after the swap channel has already been kicked from the bridge. This patch preserves the swap channel so the AMI/ARI events can note that the channel joining the bridge is swapping with another channel. Another benefit to swaqpping in one operation is if there are any channels that get lonely (MOH, bridge playback, and bridge record channels). The lonely channels won't leave before the joining channel has a chance to come back in under stasis if the swap channel is the only reason the lonely channels are staying in the bridge. ASTERISK-25947 #close Reported by: Richard Mudgett ASTERISK-24649 Reported by: John Bigelow ASTERISK-24782 Reported by: John Bigelow Change-Id: If37ea508831d1fed6dbfac2f191c638fc0a850ee	9 years ago
Richard Mudgett	8dd79720e6	bridge: Hold off more than one imparting channel at a time. An earlier patch blocked the ast_bridge_impart() call until the channel either entered the target bridge or it failed. Unfortuantely, if the target bridge is stasis and the imprted channel is not a stasis channel, stasis bounces the channel out of the bridge to come back into the bridge as a proper stasis channel. When the channel is bounced out, that released the block on ast_bridge_impart() to continue. If the impart was a result of a transfer, then it became a race to see if the swap channel would get hung up before the imparted channel could come back into the stasis bridge. If the imparted channel won then everything is fine. If the swap channel gets hung up first then the transfer will fail because the swap channel is leaving the bridge. * Allow a chain of ast_bridge_impart()'s to happen before any are unblocked to prevent the race condition described above. When the channel finally joins the bridge or completely fails to join the bridge then the ast_bridge_impart() instances are unblocked. ASTERISK-25947 Reported by: Richard Mudgett ASTERISK-24649 Reported by: John Bigelow ASTERISK-24782 Reported by: John Bigelow Change-Id: I8fef369171f295f580024ab4971e95c799d0dde1	9 years ago
George Joseph	2a2e754d15	res_pjsip_callerid: Clear out display name if id->name is not valid When create_new_id_hdr creates a new RPID or PAI header, it starts by cloning the From header, then it overwrites the display name and uri from the channel's connected.id. If the connected.id.name wasn't valid, create_new_id_hdr was leaving the display name from the From header in the new RPID or PAI header. On an attended transfer where the originator had a caller id number set but not a display name, the re-INVITE to the final transferee had the number of the originator but the display name of the transferer. Added a check to clear out the display name in the new header if connected.id.name was invalid. ASTERISK-25942 #close Change-Id: I60b4bf7a7ece9b7425eba74151c0b4969cd2738b	9 years ago
Joshua Colp	188ce34aff	app_talkdetect: Make the module core supported. This module is used as part of testsuite tests to confirm stuff works. I'm accordingly marking it as core as it is required by those tests. Change-Id: I558e7af7679b22b8ed641d7dd37ee4ca35b11e88	9 years ago
Joshua Colp	da80f40014	app_talkdetect: Enable for testsuite tests. Change-Id: I9acf2e2210f7a15cdd2c63c4c8dcb92de6b47d43	9 years ago
Mark Michelson	9f3ecf0a8d	PJSIP: Remove PJSIP parsing functions from uri length validation. The PJSIP parsing functions provide a nice concise way to check the length of a hostname in a SIP URI. The problem is that in order to use those parsing functions, it's required to use them from a thread that has registered with PJLib. On startup, when parsing AOR configuration, the permanent URI handler may not be run from a PJLib-registered thread. Specifically, this could happen when Asterisk was started in daemon mode rather than console-mode. If PJProject were compiled with assertions enabled, then this would cause Asterisk to crash on startup. The solution presented here is to do our own parsing of the contact URI in order to ensure that the hostname in the URI is not too long. The parsing does not attempt to perform a full SIP URI parse/validation, since the hostname in the URI is what is important. ASTERISK-25928 #close Reported by Joshua Colp Change-Id: Ic3d6c20ff3502507c17244a8b7e2ca761dc7fb60	9 years ago
Joshua Colp	84edbae3ab	Merge "res_pjsip_transport_management: Allow unload to occur." into certified/13.8	9 years ago
Mark Michelson	39b4742db1	res_pjsip_registrar: Fix bad memory-ness with user_agent. Recent changes to the PJSIP registrar resulted in tests failing due to missing AOR_CONTACT_ADDED test events. The reason for this was that the user_agent string had junk values in it, resulting in being unable to generate the event. I'm going to be honest here, I have no idea why this was happening. Here are the steps needed for the user_agent variable to get messed up: * REGISTER is received * First contact in the REGISTER results in a contact being removed * Second contact in the REGISTER results in a contact being added * The contact, AOR, expiration, and user agent all have to be passed as format parameters to the creation of a string. Any subset of those parameters would not be enough to cause the problem. Looking into what was happening, the thing that struck me as odd was that the user_agent variable was meant to be set to the value of the User-Agent SIP header in the incoming REGISTER. However, when removing a contact, the user_agent variable would be set (via ast_strdupa inside a loop) to the stored contact's user_agent. This means that the user_agent's value would be incorrect when attempting to process further contacts in the incoming REGISTER. The fix here is to use a different variable for the stored user agent when removing a contact. Correcting the behavior to be correct also means the memory usage is less weird, and the issue no longer occurs. ASTERISK-25929 #close Reported by Joshua Colp Change-Id: I7cd24c86a38dec69ebcc94150614bc25f46b8c08	9 years ago
Joshua Colp	4caa57f6b3	res_pjsip_transport_management: Allow unload to occur. At shutdown it is possible for modules to be unloaded that wouldn't normally be unloaded. This allows the environment to be cleaned up. The res_pjsip_transport_management module did not have the unload logic in it to clean itself up causing the res_pjsip module to not get unloaded. As a result the res_pjsip monitor thread kept going processing traffic and timers when it shouldn't. Change-Id: Ic8cadee131e3b2c436a81d3ae8bb5775999ae00a	9 years ago
Mark Michelson	0b35582bbb	transport management: Register thread with PJProject. The scheduler thread that kills idle TCP connections was not registering with PJProject properly and causing assertions if PJProject was built in debug mode. This change registers the thread with PJProject the first time that the scheduler callback executes. AST-2016-005 Change-Id: I5f7a37e2c80726a99afe9dc2a4a69bdedf661283	9 years ago
Mark Michelson	9f8b803a29	res_pjsip_transport_management: Kill idle TCP connections. "Idle" here means that someone connects to us and does not send a SIP request. PJProject will not automatically time out such connections, so it's up to Asterisk to do it instead. When we receive an incoming TCP connection, we will start a timer (equivalent to transaction timer D) waiting to receive an incoming request. If we do not receive a request in that timeframe, then we will shut down the TCP connection. ASTERISK-25796 #close Reported by George Joseph AST-2016-005 Change-Id: I7b0d303e5d140d0ccaf2f7af562071e3d1130ac6	9 years ago
Joshua Colp	3a845d27fd	Merge "Rename res_pjsip_keepalive res_pjsip_transport_management" into certified/13.8	9 years ago
Mark Michelson	a35d3eb73b	Rename res_pjsip_keepalive res_pjsip_transport_management ASTERISK-25796 Reported by George Joseph AST-2016-005 Change-Id: Id322a05f927392293570599730050bc677d99433	9 years ago
Mark Michelson	3de37dee68	AST-2016-004: Fix crash on REGISTER with long URI. Due to some ignored return values, Asterisk could crash if processing an incoming REGISTER whose contact URI was above a certain length. ASTERISK-25707 #close Reported by George Joseph Patches: 0001-res_pjsip-Validate-that-URIs-don-t-exceed-pjproject-.patch AST-2016-004 Change-Id: I0ed3898fe7ab10121b76c8c79046692de3a1be55	9 years ago

1 2 3 4 5 ...

27461 Commits (a6610fbe2f0072d57a57d7ebf405e099baeba05b) All Branches Search

27461 Commits (a6610fbe2f0072d57a57d7ebf405e099baeba05b)

All Branches