112 Commits (9d5797616c840e89fdb12b1b49e59f1266b51a68)

Author	SHA1	Message	Date
Sean Bright	04d3785a79	dtls: Add support for ephemeral DTLS certificates. ... This mimics the behavior of Chrome and Firefox and creates an ephemeral X.509 certificate for each DTLS session. Currently, the only supported key type is ECDSA because of its faster generation time, but other key types can be added in the future as necessary. ASTERISK-27395 Change-Id: I5122e5f4b83c6320cc17407a187fcf491daf30b4	8 years ago
Florian Floimair	3052b56423	alembic: Add bundle column in ps_endpoints table ... The ps_endpoints table was missing the bundle column introduced with the bundle feature in commit 065c3005ad. ASTERISK-27374 #close Change-Id: Ic900f4f2c20f64b99ea898d50f5c0a7117472d46	8 years ago
Joshua Colp	9e1fbab382	res_pjsip: Add 'ip' as a valid option to 'identify_by' on endpoint. ... When the identify_by option on an endpoint is set to ip it will only be identified using the res_pjsip_endpoint_identifier_ip module. This ensures that it is not mistakenly matched using the username of the From header. To ensure behavior has not changed the default has been changed to "username,ip" for the identify_by option. ASTERISK-27206 Change-Id: I2170b86a7f7e221b4f00bf14aa1ef1ac5b050bbd	8 years ago
George Joseph	446d48fd49	res_pjsip: Add handling for incoming unsolicited MWI NOTIFY ... A new endpoint parameter "incoming_mwi_mailbox" allows Asterisk to receive unsolicited MWI NOTIFY requests and make them available to other modules via the stasis message bus. res_pjsip_pubsub has a new handler "pubsub_on_rx_mwi_notify_request" that parses a simple-message-summary body and, if endpoint->incoming_mwi_account is set, calls ast_publish_mwi_state with the voice-message counts from the message. Change-Id: I08bae3d16e77af48fcccc2c936acce8fc0ef0f3c	8 years ago
Jenkins2	ec940f4fec	Merge "alembic: Fix typo in add_auto_info_to_endpoint_dtmf_mode"	8 years ago
George Joseph	f9bad3bd61	alembic: Fix typo in add_auto_info_to_endpoint_dtmf_mode ... The downgrade function was missing "_v2" at the end of the alter column type. Change-Id: Iaa9bcef48d6f3590ce07a61342d8e66f00263d8e	8 years ago
Florian Floimair	e9a81157ac	alembic: Add support for MS-SQL ... MS-SQL has no native Enum-type support and therefore needs to work with constraints. Since these constraints need unique names the suggested approach referenced in the following alembic documentation has been applied: http://bit.ly/2x9r8pb ASTERISK-27255 #close Change-Id: I8b579750dae0c549f1103ee50172644afb9b2f95	8 years ago
George Joseph	2857a3334a	Merge "alembic: Fix enum creation for dtls_fingerprint"	8 years ago
George Joseph	0cbb17ce8f	alembic: Fix enum creation for dtls_fingerprint ... Change-Id: Ic061c5066a146616a68376881c7e4cf6d6e7e7db	8 years ago
Florian Floimair	a133c5cc53	alembic: fix erroneous commit for add_prune_on_boot ... Added include for postgresql ENUM type and redefined values in the same way as in the other migration scripts. ASTERISK-27254 #close Change-Id: Id667304cdf3891b1c2f7d35fab3e2a84026159fa	8 years ago
Florian Floimair	2ee644aacf	alembic: Add dtls_fingerprint column in ps_endpoints table ... The ps_endpoints table was missing the dtls_fingerprint column introduced with commit adba2a8d7f. ASTERISK-27168 #close Change-Id: I9cb5006f7f50718b5239919562773adabb334cfd	8 years ago
Richard Mudgett	82f4ade959	res_pjsip: Remove ephemeral registered contacts on transport shutdown. ... The fix for the issue is broken up into three parts. This is part two which handles the server side of REGISTER requests when rewrite_contact is enabled. Any registered reliable transport contact becomes invalid when the transport connection becomes disconnected. * Monitor the rewrite_contact's reliable transport REGISTER contact for shutdown. If it is shutdown then the contact must be removed because it is no longer valid. Otherwise, when the client attempts to re-REGISTER it may be blocked because the invalid contact is there. Also if we try to send a call to the endpoint using the invalid contact then the endpoint is not likely to see the request. The endpoint either won't be listening on that port for new connections or a NAT/firewall will block it. * Prune any rewrite_contact's registered reliable transport contacts on boot. The reliable transport no longer exists so the contact is invalid. * Websockets always rewrite the REGISTER contact address and the transport needs to be monitored for shutdown. * Made the websocket transport set a unique name since that is what we use as the ao2 container key. Otherwise, we would not know which transport we find when one of them shuts down. The names are also used for PJPROJECT debug logging. * Made the websocket transport post the PJSIP_TP_STATE_CONNECTED state event. Now the global keep_alive_interval option, initially idle shutdown timer, and the server REGISTER contact monitor can work on wetsocket transports. * Made the websocket transport set the PJSIP_TP_DIR_INCOMING direction. Now initially idle websockets will automatically shutdown. ASTERISK-27147 Change-Id: I397a5e7d18476830f7ffe1726adf9ee6c15964f4	8 years ago
Kevin Harwell	521b6fed12	alembic/res_pjsip: Add "webrtc" configuration option ... When the "webrtc" option was added in res_pjsip it was not added to the alembic scripts. This patch adds the option for alembic. Also, changed the sorcery configuration type to an OPT_YESNO_T value instead of an OPT_BOOL_T so if this field is ever written to a database it will write out the correct value. ASTERISK-27119 #close Change-Id: I3e199f060aea25e193c439fc5cf96be4d3ed1c7b	8 years ago
George Joseph	7a4f577eb7	Fix alembic branches ... Change-Id: I04f607f084bda9b1b7f626e8e9735c37dc751187	8 years ago
Torrey Searle	fb7247c57c	res_pjsip: Add DTMF INFO Failback mode ... The existing auto dtmf mode reverts to inband if 4733 fails to be negotiated. This patch adds a new mode auto_info which will switch to INFO instead of inband if 4733 is not available. ASTERISK-27066 #close Change-Id: Id185b11e84afd9191a2f269e8443019047765e91	8 years ago
Mark Michelson	45df25a579	chan_pjsip: Add support for multiple streams of the same type. ... The stream topology (list of streams and order) is now stored with the configured PJSIP endpoints and used during the negotiation process. Media negotiation state information has been changed to be stored in a separate object. Two of these objects exist at any one time on a session. The active media state information is what was previously negotiated and the pending media state information is what the media state will become if negotiation succeeds. Streams and other state information is stored in this object using the index (or position) of each individual stream for easy lookup. The ability for a media type handler to specify a callback for writing has been added as well as the ability to add file descriptors with a callback which is invoked when data is available to be read on them. This allows media logic to live outside of the chan_pjsip module. Direct media has been changed so that only the first audio and video stream are directly connected. In the future once the RTP engine glue API has been updated to know about streams each individual stream can be directly connected as appropriate. Media negotiation itself will currently answer all the provided streams on an offer within configured limits and on an offer will use the topology created as a result of the disallow/allow codec lines. If a stream has been removed or declined we will now mark it as such within the resulting SDP. Applications can now also request that the stream topology change. If we are told to do so we will limit any provided formats to the ones configured on the endpoint and send a re-invite with the new topology. Two new configuration options have also been added to PJSIP endpoints: max_audio_streams: determines the maximum number of audio streams to offer/accept from an endpoint. Defaults to 1. max_video_streams: determines the maximum number of video streams to offer/accept from an endpoint. Defaults to 1. ASTERISK-27076 Change-Id: I8afd8dd2eb538806a39b887af0abd046266e14c7	8 years ago
Alexei Gradinari	7a46309d3d	res_pjsip: New endpoint option "notify_early_inuse_ringing" ... This option was added to control whether to notify dialog-info state 'early' or 'confirmed' on Ringing when already INUSE. The value "yes" is useful for some SIP phones (Cisco SPA) to be able to indicate and pick up ringing devices. ASTERISK-26919 #close Change-Id: Ie050bc30023543c7dfb4365c5be3ce58c738c711	8 years ago
Alexei Gradinari	808f299808	res_pjsip: New endpoint option "refer_blind_progress" ... This option was added to turn off notifying the progress details on Blind Transfer. If this option is not set then the chan_pjsip will send NOTIFY "200 OK" immediately after "202 Accepted". Some SIP phones like Mitel/Aastra or Snom keep the line busy until receive "200 OK". ASTERISK-26333 #close Change-Id: Id606fbff2e02e967c02138457badc399144720f2	8 years ago
Joshua Colp	199d4776c0	alembic: Add table for 'resource_list' PJSIP RLS type. ... This change adds an Alembic migration which adds a ps_resource_list table that can contain resource_list RLS configuration objects. ASTERISK-26929 Change-Id: I7c888fafc67b3e87012de974f71ca7a5b8b1ec05	8 years ago
Joshua Colp	270b485f04	pjsip: Add Alembic for PUBLISH support. ... This change adds database tables for the PUBLISH support so it can be configured using realtime. A minor fix to the res_pjsip_publish_asterisk module was done so that it read the sorcery configuration from the correct section. Finally the sample configuration files have been updated. ASTERISK-26928 Change-Id: I81991ae5c75af98d247f7eacd1c0b0a763675952	8 years ago
Sean Bright	7c0b12dc41	alembic: Turn off execute bit on non-executable python scripts ... Change-Id: I744c986da4a38aeff8c00837eb89de7841fbc86c	8 years ago
Richard Begg	6b7697ed48	res_pjsip_session: Enable RFC3578 overlap dialing support. ... Support for RFC3578 overlap dialling (i.e. 484 Response to partially matched destinations) as currently provided by chan_sip is missing from res_pjsip. This patch adds a new endpoint attribute (allow_overlap) [defaults to yes] which when set to yes enables 484 responses to partial destination matches rather than the current 404. ASTERISK-26864 Change-Id: Iea444da3ee7c7d4f1fde1d01d138a3d7b0fe40f6	8 years ago
George Joseph	5013d8f5d3	res_pjsip: Symmetric transports ... A new transport parameter 'symmetric_transport' has been added. When a request from a dynamic contact comes in on a transport with this option set to 'yes', the transport name will be saved and used for subsequent outgoing requests like OPTIONS, NOTIFY and INVITE. It's saved as a contact uri parameter named 'x-ast-txp' and will display with the contact uri in CLI, AMI, and ARI output. On the outgoing request, if a transport wasn't explicitly set on the endpoint AND the request URI is not a hostname, the saved transport will be used and the 'x-ast-txp' parameter stripped from the outgoing packet. * config_transport was modified to accept and store the new parameter. * config_transport/transport_apply was updated to store the transport name in the pjsip_transport->info field using the pjsip_transport->pool on UDP transports. * A 'multihomed_on_rx_message' function was added to pjsip_message_ip_updater that, for incoming requests, retrieves the transport name from pjsip_transport->info and retrieves the transport. If transport->symmetric_transport is set, an 'x-ast-txp' uri parameter containing the transport name is added to the incoming Contact header. * An 'ast_sip_get_transport_name' function was added to res_pjsip. It takes an ast_sip_endpoint and a pjsip_sip_uri and returns a transport name if endpoint->transport is set or if there's an 'x-ast-txp' parameter on the uri and the uri host is an ipv4 or ipv6 address. Otherwise it returns NULL. * An 'ast_sip_dlg_set_transport' function was added to res_pjsip which takes an ast_sip_endpoint, a pjsip_dialog, and an optional pjsip_tpselector. It calls ast_sip_get_transport_name() and if a non-NULL is returned, sets the selector and sets the transport on the dialog. If a selector was passed in, it's updated. * res_pjsip/ast_sip_create_dialog_uac and ast_sip_create_dialog_uas were modified to call ast_sip_dlg_set_transport() instead of their original logic. * res_pjsip/create_out_of_dialog_request was modified to call ast_sip_get_transport_name() and pjsip_tx_data_set_transport() instead of its original logic. * Existing transport logic was removed from endpt_send_request since that can only be called after a create_out_of_dialog_request. * res_pjsip/ast_sip_create_rdata was converted to a wrapper around a new 'ast_sip_create_rdata_with_contact' function which allows a contact_uri to be specified in addition to the existing parameters. (See below) * res_pjsip_pubsub/internal_pjsip_evsub_send_request was eliminated since all it did was transport selection and that is now done in ast_sip_create_dialog_uac and ast_sip_create_dialog_uas. * 'contact_uri' was added to subscription_persistence. This was necessary because although the parsed rdata contact header has the x-ast-txp parameter added (if appropriate), subscription_persistence_update stores the raw packet which doesn't have it. subscription_persistence_recreate was then updated to call ast_sip_create_rdata_with_contact with the persisted contact_uri so the recreated subscription has the correct transport info to send the NOTIFYs. * res_pjsip_session/internal_pjsip_inv_send_msg was eliminated since all it did was transport selection and that is now done in ast_sip_create_dialog_uac. * pjsip_message_ip_updater/multihomed_on_tx_message was updated to remove all traces of the x-ast-txp parameter from the outgoing headers. NOTE: This change does NOT modify the behavior of permanent contacts specified on an aor. To do so would require that the permanent contact's contact uri be updated with the x-ast-txp parameter and the aor sorcery object updated. If we need to persue this, we need to think about cloning permanent contacts into the same store as the dynamic ones on an aor load so they can be updated without disturbing the originally configured value. You CAN add the x-ast-txp parameter to a permanent contact's uri but it would be much simpler to just set endpoint->transport. Change-Id: I4ee1f51473da32ca54b877cd158523efcef9655f	8 years ago
Mark Michelson	10fa49e327	Add rtcp-mux support ... This commit adds support for RFC 5761: Multiplexing RTP Data and Control Packets on a Single Port. Specifically, it enables the feature when using chan_pjsip. A new option, "rtcp_mux" has been added to endpoint configuration in pjsip.conf. If set, then Asterisk will attempt to use rtcp-mux with whatever it communicates with. Asterisk follows the rules set forth in RFC 5761 with regards to falling back to standard RTCP behavior if the far end does not indicate support for rtcp-mux. The lion's share of the changes in this commit are in res_rtp_asterisk.c. This is because it was pretty much hard wired to have an RTP and an RTCP transport. The strategy used here is that when rtcp-mux is enabled, the current RTCP transport and its trappings (such as DTLS SSL session) are freed, and the RTCP session instead just mooches off the RTP session. This leads to a lot of specialized if statements throughout. ASTERISK-26732 #close Reported by Dan Jenkins Change-Id: If46a93ba1282418d2803e3fd7869374da8b77ab5	8 years ago
Matt Jordan	1475604eff	res_pjsip_endpoint_identifier_ip: Add an option to match requests by header ... This patch adds a new features to the endpoint identifier module, 'match_header'. When set, inbound requests are matched by a provided SIP header: value pair. This option works in conjunction with the existing 'match' configuration option, such that if any 'match*' attribute matches an inbound request, the request is associated with the specified endpoint. Since this module now identifies by more than just IP address, appropriate renaming of the module and/or variables can be done in a non-release branch. ASTERISK-26863 #close Change-Id: Icfc14835c962f92e35e67bbdb235cf0589de5453 (cherry picked from commit 30f52d79d7)	8 years ago
Joshua Colp	a7d856cd96	res_pjsip_endpoint_identifier_ip: Add support for SRV lookups. ... This change implements SRV support for the IP based endpoint identifier module. All possible addresses through SRV are looked up and added as matches. If no SRV records are available a fallback to normal host resolution is done. If an IP address is provided then no SRV lookup occurs. This is configured using the "srv_lookups" option on the identify section and defaults to "yes". ASTERISK-26693 Change-Id: I6b641e275bf96629320efa8b479737062aed82ac	8 years ago
Tzafrir Cohen	bab253ac9f	Fixes to various issues reported by pyflakes ... Pyflake is a python (2) source checker. This patch fixes various (mostly trivial) errors and warnings it reports. Change-Id: Ia35c5ac61751b927814cf693994c632c412386ea	8 years ago
Joshua Colp	aed6c219a3	pjsip: Fix a few media bugs with reinvites and asymmetric payloads. ... When channel format changes occurred as a result of an RTP re-negotiation the bridge was not informed this had happened. As a result the bridge technology was not re-evaluated and the channel may have been in a bridge technology that was incompatible with its formats. The bridge is now unbridged and the technology re-evaluated when this occurs. The chan_pjsip module also allowed asymmetric codecs for sending and receiving. This did not work with all devices and caused one way audio problems. The default has been changed to NOT do this but to match the sending codec to the receiving codec. For users who want asymmetric codecs an option has been added, asymmetric_rtp_codec, which will return chan_pjsip to the previous behavior. The codecs returned by the chan_pjsip module when queried by the bridge_native_rtp module were also not reflective of the actual negotiated codecs. The nativeformats are now returned as they reflect the actual negotiated codecs. ASTERISK-26423 #close Change-Id: I6ec88c6e3912f52c334f1a26983ccb8f267020dc	9 years ago
zuul	1ca148cae8	Merge "Add text of cdr directory into README.md for ast-db-manage"	9 years ago
George Joseph	442b597929	alembic: Allow cdr, config and voicemail to exist in the same schema ... cdr, config and voicemail are all separate alembic trees. Because alembic's default is to use a table named 'alembic_version' to store the current tree revision, the 3 trees can't exist in the same schema without stepping on each other. Now each tree uses 'alembic_version_<tree_name>' as the version table. Each tree's env.py script now first checks for 'alembic_version'. If it finds it AND its revision is in the tree's history, the script renames it to 'alembic_version_<tree_name>'. Regardless, the script then continues with the migration using 'alembic_version_<tree_name>' and creates that table if it's not found. The result is that if an existing 'alembic_version' table was found but it didn't belong to this tree, it's left alone and 'alembic_version_<tree_name>' is used or created. WARNING: If multiple trees are using the same schema, they MUST NOT CRU or D any objects with names that might exist in the other trees. An example would be 'yesno_values' type. If two trees perform operations on it, one tree could pull it out from under the other. Thankfully we currently don't share any names among cdr, config and voicemail. NOTE: Since the env.py scripts in each tree were identical, a common env.py has been placed in the ast-db-manage directory and a symlink to it has been placed in each tree directory. ASTERISK-24311 #close Reported-by: Dafi Ni Change-Id: I4d593f000350deb5d21a14fa1e9bc3896844d898	9 years ago
Rodrigo Ramírez Norambuena	79532bca75	Add text of cdr directory into README.md for ast-db-manage ... Change-Id: I68321c4bea50730c39fdb486e5f23aeadd1ad636	9 years ago
Richard Mudgett	ba362822f3	res_pjsip: Add ignore_uri_user_options option. ... This implements the chan_sip legacy_useroption_parsing option but with a better name. * Made the caller-id number and redirecting number strings obtained from incoming SIP URI user fields always truncated at the first semicolon. People don't care about anything after the semicolon showing up on their displays even though the RFC allows the semicolon. ASTERISK-26316 #close Reported by: Kevin Harwell Change-Id: Ib42b0e940dd34d84c7b14bc2e90d1ba392624f62	9 years ago
Aaron An	2a50c29101	res/res_pjsip: Add preferred_codec_only config to pjsip endpoint. ... This patch add config to pjsip by endpoint. ;preferred_codec_only=yes ; Respond to a SIP invite with the single most preferred codec ; rather than advertising all joint codec capabilities. This ; limits the other side's codec choice to exactly what we prefer. ASTERISK-26317 #close Reported by: AaronAn Tested by: AaronAn Change-Id: Iad04dc55055403bbf5ec050997aee2dadc4f0762	9 years ago
George Joseph	534063fd67	res_pjsip: Add contact_user to endpoint ... contact_user, when specified on an endpoint, will override the user portion of the Contact header on outgoing requests. Change-Id: Icd4ebfda2f2e44d3ac749d0b4066630e988407d4	9 years ago
Kevin Harwell	b3c2f1164b	alembic: add auth_username to endpoint's identify_by enum ... A new identify_by option was added recently, auth_username. However, this setting was not added as an allowable choice in the database enumeration value. This patch updates the current enumeration, adding in the new setting. ASTERISK-26268 #close Change-Id: Ib4788e8485e4cd40172ec0abbf5810a147ab8bf8	9 years ago
zuul	3eeeb13481	Merge "alembic/sqlalchemy: auto increment only allowed on a single column"	9 years ago
Kevin Harwell	d4170df40a	alembic/sqlalchemy: auto increment only allowed on a single column ... The extensions table defined two columns (id and priority) as primary key autoincrement columns. However only one is allowed when defining the primary key. This patch removes the autoincrement attribute from the priority column since it does not need to be as such and really should not have been on there in the first place. This patch also removes 'context', 'exten', and 'priority' from the primary key index and creates a new combined unique contraint index on them. ASTERISK-26183 #close Change-Id: Ib9c712c612a4d7ec1edb0dcb77f1bae0905a470b	9 years ago
Alexei Gradinari	403b63571c	res_pjsip_mwi: fix unsolicited mwi blocks PJSIP stack ... The PJSIP taskprocessors could be overflowed on startup if there are many (thousands) realtime endpoints configured with unsolicited mwi. The PJSIP stack could be totally unresponsive for a few minutes after boot completed. This patch creates a separate PJSIP serializers pool for mwi and makes unsolicited mwi use serializers from this pool. This patch also adds 2 new global options to tune taskprocessor alert levels: 'mwi_tps_queue_high' and 'mwi_tps_queue_low'. This patch also adds new global option 'mwi_disable_initial_unsolicited' to disable sending unsolicited mwi to all endpoints on startup. If disabled then unsolicited mwi will start processing on next endpoint's contact update. ASTERISK-26230 #close Change-Id: I4c8ecb82c249eb887930980a800c9f87f28f861a	9 years ago
Mark Michelson	76781a0964	Fix sqlalchemy error regarding identifier length. ... sqlalchemy was complaining: sqlalchemy.exc.IdentifierError: Identifier 'ps_contacts_qualifyfreq_exptime' exceeds maximum length of 30 characters This fixes the problem by changing the index name to be "ps_contacts_qualifyfreq_exp" instead. ASTERISK-26227 #close Reported by Mark Michelson Change-Id: I0ed784f87504be2a59ee8d3242ef6f625d5ed1a9	9 years ago
Richard Mudgett	e739888d99	res_pjsip: Add fax_detect_timeout endpoint option. ... The new endpoint option allows the PJSIP channel driver's fax_detect endpoint option to timeout on a call after the specified number of seconds into a call. The new feature is disabled if the timeout is set to zero. The option is disabled by default. ASTERISK-26214 Reported by: Richard Mudgett Change-Id: Id5a87375fb2c4f9dc1d4b44c78ec8735ba65453d	9 years ago
Alexei Gradinari	1c949eea6c	res_pjsip: Added "subscribe_context" to endpoint ... If specified, incoming SUBSCRIBE requests will be searched for the matching extension in the indicated context. If no "subscribe_context" is specified, then the "context" setting is used. ASTERISK-25471 #close Change-Id: I3fb7a15f5bc154079bd348c08b7ad1cdd2d5e514	9 years ago
Joshua Colp	040a11cecd	Merge "res_pjsip: improve realtime performance #2"	9 years ago
Alexei Gradinari	6fa3ed0679	res_pjsip: improve realtime performance #2 ... The patch removes updating all Endpoints' status on startup. Instead, only non-qualified aors with static contact and non-qualified non-expired contacts are retrieved from the realtime to update the endpoint status to ONLINE. The endpoint name was added to the contact object to simply find the endpoint that created this contact. The status of endpoints with qualified aors will be updated by 'qualify' functions. ASTERISK-26061 #close Change-Id: Id324c1776fa55d3741e0c5457ecac0304cb1a0df	9 years ago
Mark Michelson	b6bd97eea2	Fix Alembic upgrades. ... A non-existent constraint was being referenced in the upgrade script. This patch corrects the problem by removing the reference. In addition, the head of the alembic branch referred to a non-existent revision. This has been fixed by referring to the proper revision. This patch fixes another realtime problem as well. Our Alembic scripts store booleans as yes or no values. However, Sorcery tries to insert "true" or "false" instead. This patch introduces a new boolean type that translates to "yes" or "no" instead. ASTERISK-26128 #close Change-Id: I51574736a881189de695a824883a18d66a52dcef	9 years ago
Joshua Colp	4505a59dc9	alembic: Fix migration. ... The 81b01a191a46_pjsip_add_contact_reg_server.py script was attempting to use UniqueConstraint and failing. It was not imported and after importing it also continued to fail. I've changed the script to use the explicit name of the constraint instead. Change-Id: I2438b0be90b7ce583b47dd27983c0c1a02cea5b9	9 years ago
Alexei Gradinari	31f17abe44	res_pjsip: add "via_addr", "via_port", "call_id" to contact ... As res_pjsip_nat rewrites contact's address, only the last Via header can contain the source address of registered endpoint. Also Call-Id header may contain the source address of registered endpoint. Added "via_addr", "via_port", "call_id" to contact. Added new fields ViaAddress, CallID to AMI event ContactStatus. ASTERISK-26011 Change-Id: I36bcc0bf422b3e0623680152d80486aeafe4c576	9 years ago
Alexei Gradinari	69a85a519f	res_pjsip: Endpoint IP Access Controls ... With the old SIP module we can use IP access controls per peer. PJSIP module missing this feature. This patch added next configuration Endpoint options: "acl" - list of IP ACL section names in acl.conf "deny" - List of IP addresses to deny access from "permit" - List of IP addresses to permit access from "contact_acl" - List of Contact ACL section names in acl.conf "contact_deny" - List of Contact header addresses to deny "contact_permit" - List of Contact header addresses to permit This patch also better logging failed request: add custom message instead of "No matching endpoint found" add SIP method to logging ASTERISK-25900 Change-Id: I456dea3909d929d413864fb347d28578415ebf02	9 years ago
Joshua Colp	87787bb889	Merge "res_pjsip: improve realtime performance"	9 years ago
Alexei Gradinari	cc4c5f5693	res_pjsip: improve realtime performance ... This patch modified pjsip_options to retrieve only permament contacts for aor if the qualify_frequency is > 0 and persisted contacts if the qualify_frequency is > 0. This patch also fixed a bug in res_sorcery_astdb. res_sorcery_astdb doesn't save object data retrived from astdb. ASTERISK-25826 Change-Id: I1831fa46c4578eae5a3e574ee3362fddf08a1f05	9 years ago
Alexei Gradinari	4df48581f1	pjsip: Added "reg_server" to contacts (fixed alembic) ... ASTERISK-25931 Change-Id: Icc4321a88f5c93ff809da3f372eebbf69c6a8549	9 years ago