30357 Commits (9d5797616c840e89fdb12b1b49e59f1266b51a68)

 

All Branches   

Search

Author	SHA1	Message	Date
Corey Farrell	9d5797616c	loader: Use vector to build apha sorted module lists. ... Change-Id: I9c519f4dec3cda98b2f34d314255a31d49a6a467	8 years ago
Corey Farrell	7b54903313	loader: Replace priority heap with vector. ... This is needed for future changes which will require being able to process the load priority out of order. Change-Id: Ia23421197f09789940510b03ebbbf3bf24d51bea	8 years ago
Corey Farrell	3505cc88e8	loader: Rework of load_dynamic_module. ... * Split off load_dlopen to perform actual dlopen, check results and log warnings when needed. * Always use RTLD_NOW. * Use flags which minimize number of calls to dlopen required. First attempt always uses RTLD_GLOBAL when global_symbols_only is enabled, RTLD_LOCAL when it is not. This patch significantly reduces the number of dlopen's performed. With 299 modules my system ran dlopen 857 times before this patch, 655 times after this patch. Change-Id: Ib2c9903cfddcc01aed3e01c1e7fe4a3fb9af0f8b	8 years ago
Corey Farrell	80bf0ee99a	loader: Minor fix to module registration. ... This protects the module loader itself against crashing if dlopen is called on a module from outside loader.c. * Expand scope of lock inside ast_module_register to include reading of resource_being_loaded. * NULL check resource_being_loaded. * Set resource_being_loaded NULL as soon as dlopen returns. This fixes some error paths where it was not NULL'ed. * Create module_destroy function to deduplicate code from ast_module_unregister and modules_shutdown. * Resolve leak that occured if a module did not successfully register. * Simplify checking for successful registration. Change-Id: I40f07a315e55b92df4fc7faf525ed6d4f396e7d2	8 years ago
Jenkins2	30658e7143	Merge "configs: Comment out and change IP of iax.conf [demo]"	8 years ago
Jenkins2	a33207a91f	Merge "res_pjsip_session: Reinvite using active stream topology if none requested."	8 years ago
George Joseph	283d2df680	res_pjsip_sdp_rtp: Add NULL check in add_crypto_to_stream ... add_crypto_to_stream wasn't checking for a NULL session->inv_session->neg before calling pjmedia_sdp_neg_get_state. This was causing a crash if the negotiation hadn't already been completed and asterisk was compiled with --enable-dev-mode. Change-Id: I57c6229954a38145da9810fc18657bfcc4d9d0c9	8 years ago
Sean Bright	dac5e3a0df	configs: Comment out and change IP of iax.conf [demo] ... This no longer appears to exist, so no sense in causing confusion. ASTERISK-27175 #close Reported by: Tzafrir Cohen Change-Id: Idde967924c69f6a741dc9a5ab7dacb44d22cf100	8 years ago
Joshua Colp	ec984870b0	Merge "menuselect: Tweak check for recently run configure."	8 years ago
Joshua Colp	49f2ff37bd	Merge "README: Remove outdated references to tex docs"	8 years ago
Joshua Colp	7a837ece97	Merge "Add new AMI action for app_voicemail"	8 years ago
Joshua Colp	e411b7d112	Merge "chan_sip: 3PCC patch for AMI "SIPnotify""	8 years ago
Kevin Harwell	30954337a0	Merge "pjsip_options: contacts sometimes not being updated on reload"	8 years ago
Jenkins2	588be919cb	Merge "res_pjsip: Assign support levels to a few modules"	8 years ago
George Joseph	a51bfe5a79	README: Remove outdated references to tex docs ... Added links to the wiki to replace references to outdated tex docs. ASTERISK-27430 Reported by: Corey Farrell Change-Id: I5007e732b30bc7b63d124c530ae8857c89991209	8 years ago
Jenkins2	8a281776d5	Merge "pjsip_options: dynamic contact's fields not updated on reload"	8 years ago
George Joseph	afb6e85980	Merge "CLI: Fix 'core show sysinfo' function ordering."	8 years ago
Joshua Colp	c50905756b	Merge "chan_pjsip/res_pjsip: Add CHANNEL(pjsip,request_uri)"	8 years ago
pchero	daa3a3009a	Add new AMI action for app_voicemail ... Currently, to figure out specified voicemail's status, there's only one way to do it, which is use a VoicemailUserEntry AMI message. But it consumed it too much resource(it check everything). So, added new AMI action. ASTERISK-27470 Change-Id: Ie4eba1424a142e5fbd1d9fb1821a3fc1a1e238b7	8 years ago
Joshua Colp	62f2860c39	AST-2017-012: Place single RTCP report block at beginning of report. ... When the RTCP code was transitioned over to Stasis a code change was made to keep track of how many reports are present. This count controlled where report blocks were placed in the RTCP report. If a compound RTCP packet was received this logic would incorrectly place a report block in the wrong location resulting in a write to an invalid location. This change removes this counting logic and always places the report block at the first position. If in the future multiple reports are supported the logic can be extended but for now keeping a count serves no purpose. ASTERISK-27382 ASTERISK-27429 Change-Id: Iad6c8a9985c4b608ef493e19c421211615485116	8 years ago
Jenkins2	58514c7442	Merge "chan_sip: Don't crash in Dial on invalid destination"	8 years ago
Joshua Colp	3370cd21df	res_pjsip_session: Reinvite using active stream topology if none requested. ... When a connected line update is sent to an endpoint we do not request a specific stream topology to be used. Previously this resulted in the configured stream topology being used which may actually differ from the currently negotiated topology. PJSIP is helpful in this regard in that it will fill in any missing streams with removed ones. This results in our own state not matching the SDP, though, and we do not apply the negotiated SDP. This change tweaks the code to use the actively negotiated stream topology if it is present with a fallback to the configured one. This results in the SDP and the state having matching information and the world is happy. ASTERISK*27397 Change-Id: I7a57117f0183479e6884b7bf3a53bb8c7464f604	8 years ago
Jenkins2	e7dccbe708	Merge "chan_sip: Don't send trailing \0 on keep alive packets"	8 years ago
Yasuhiko Kamata	cb249b2419	chan_sip: 3PCC patch for AMI "SIPnotify" ... A patch for sending in-dialog SIP NOTIFY message with "SIPnotify" AMI action. ASTERISK-27461 Change-Id: I5797ded4752acd966db6b13971284db684cc5ab4	8 years ago
Sean Bright	0c9cc7e975	chan_sip: Don't send trailing \0 on keep alive packets ... This is a partial fix for ASTERISK~25817 but does not address the comments regarding RFC 5626. Change-Id: I227e2d10c0035bbfa1c6e46ae2318fd1122d8420	8 years ago
Sean Bright	5039b5741c	chan_sip: Don't crash in Dial on invalid destination ... Stripping the DNID in a SIP dial string can result in attempting to call the argument parsing macros on an empty string, causing a crash. ASTERISK-26131 #close Reported by: Dwayne Hubbard Patches: dw-asterisk-master-dnid-crash.patch (license #6257) patch uploaded by Dwayne Hubbard Change-Id: Ib84c1f740a9ec0539d582b09d847fc85ddca1c5e	8 years ago
Corey Farrell	6a67828b46	menuselect: Tweak check for recently run configure. ... Recently menuselect has randomly produced an error stating that configure was just run and make had to be restarted. I believe this is due to an incorrect menuselect/Makefile rule. The original rule produced an error if makeopts or autoconfig.h were older than makeopts.in or autoconfig.h.in. I believe this can create an issue if makeopts is older than autoconfig.h.in or if autoconfig.h is older than makeopts.in. The new rules compare files independently. Change-Id: Ibca155035fa1392c95e33cbf25f257902abba17b	8 years ago
Richard Mudgett	22810fc635	chan_pjsip/res_pjsip: Add CHANNEL(pjsip,request_uri) ... This patch does three things associated with the initial incoming INVITE request URI. 1) Add access to the full initial incoming INVITE request URI. 2) We were not setting DNID on incoming PJSIP channels. The DNID is the user portion of the initial incoming INVITE Request-URI. The value is accessed by reading CALLERID(dnid). 3) Fix CHANNEL(pjsip,target_uri) documentation. * The initial incoming INVITE request URI is now available using CHANNEL(pjsip,request_uri). * Set the DNID on PJSIP channel creation so CALLERID(dnid) can return the initial incoming INVITE request URI user portion. * CHANNEL(pjsip,target_uri) now correctly documents that the target URI is the contact URI. * Refactored print_escaped_uri() out of channel_read_pjsip() to handle pjsip_uri_print() error condition when the buffer is too small. ASTERISK-27478 Change-Id: I512e60d1f162395c946451becb37af3333337b33	8 years ago
Sean Bright	ec1f4bf48d	res_pjsip: Add TLSv1.1 and TLSv1.2 support ... Support for these protocols was added in the same commit as the 'proto' field, so we can safely use the same ./configure check. For reference: https://trac.pjsip.org/repos/changeset/4968 Change-Id: Icf4975d785d6bfb8f30ac7ffa695a0adf9382dac	8 years ago
Sean Bright	0b9d2135a9	res_pjsip: Assign support levels to a few modules ... Change-Id: I51f6945c4023cb93fc7b87be5ab4c50e9e6ee27d	8 years ago
Corey Farrell	c01ba7437e	CLI: Fix 'core show sysinfo' function ordering. ... Handle CLI initialization before any processing occurs. Change-Id: I598b911d2e409214bbdfd0ba0882be1d602d221c	8 years ago
Richard Mudgett	c2ec82bf36	stasis_channels.c: Don't set channel snapshot caller_dnid twice. ... Change-Id: Ib8d45bbdfbda81e65045f6dff874d189b74e5471	8 years ago
Jenkins2	38dcdf2d68	Merge "codec_opus: Make libcurl a dependency in menuselect"	8 years ago
Jenkins2	b7e79d7baf	Merge "astdb: Improve prefix searches in astdb"	8 years ago
Jenkins2	f81a884033	Merge "loader: Refactor resource_name_match."	8 years ago
Joshua Colp	5d43a4d4ff	Merge "res_stasis and res_speech: Fix load order."	8 years ago
Jenkins2	710b3a29c3	Merge "utils: Add convenience function for setting fd flags"	8 years ago
Sean Bright	00578fae0a	codec_opus: Make libcurl a dependency in menuselect ... ASTERISK-27475 #close Change-Id: If7384bc6ed002ef140dec69798d14c52b7cfd800	8 years ago
Jenkins2	cd741136c5	Merge "pjsip: Improve CLI completion performance"	8 years ago
Jenkins2	6d25b26933	Merge "CDR: Fix deadlock setting some CDR values."	8 years ago
Sean Bright	521f741b04	pjsip: Improve CLI completion performance ... Use the new ast_cli_completion_add() function to improve completion performance for commands like 'pjsip show endpoint.' Change-Id: I76d802294d2ac1766110dc75f7d117c8541ce348	8 years ago
Sean Bright	9a9edc6c9e	astdb: Improve prefix searches in astdb ... Using the LIKE operator requires a full table scan of 'astdb', whereas a comparison operation is able to use the primary key index. This patch adds a new function to the AstDB API for quick prefix matches and updates res_sorcery_astdb to utilize it. This showed substantial performance improvement in my test environment. Related to ASTERISK~26806, but does not completely resolve it. Change-Id: I7d37f9ba2aea139dabf2ca72d31fbe34bd9b2fa1	8 years ago
Corey Farrell	d2e87b8e14	loader: Refactor resource_name_match. ... Optimize resource_name_match. This change eliminates use of ast_strdupa, instead verifying that both basename's are the same length, then using strncasecmp. Change-Id: I477275c0e954c99d74be5abfc8bb6545b04e5a3d	8 years ago
Sean Bright	dbb376f166	pjsip_configuration: Add correct file header ... Change-Id: I25348c386a222bb704aff07f54375108a6402906	8 years ago
Sean Bright	2ffe52a116	utils: Add convenience function for setting fd flags ... There are many places in the code base where we ignore the return value of fcntl() when getting/setting file descriptior flags. This patch introduces a convenience function that allows setting or clearing file descriptor flags and will also log an error on failure for later analysis. Change-Id: I8b81901e1b1bd537ca632567cdb408931c6eded7	8 years ago
Corey Farrell	e2dbc26376	res_stasis and res_speech: Fix load order. ... res_stasis was missing AST_MODFLAG_LOAD_ORDER. Set res_stasis and res_speech to start at (AST_MODPRI_APP_DEPEND - 1) so they are ready for dependent modules. Change-Id: I27f4f3810a95b6be8a5bfbf62be2ace6bfab6ff3	8 years ago
Kevin Harwell	0e4d31eb9c	pjsip_options: contacts sometimes not being updated on reload ... For both dynamic and static contacts it was possible that potential AOR changes were not being applied to all contacts. This was because the qualify and schedule code was only retrieving AOR's, and contacts with frequencies greater than zero. For instance the following could happen: and AOR/contact has a frequency of 5, it then gets set to 0, and then a reload occurs. All scheduled OPTIONS are stopped, a list of AOR's is retrieved with frequency > 0, but none are selected since in this scenario all are 0. The contact for the one previously set to 5 though does not get updated, so it's status remains "AVAILABLE". This patch makes it so all contacts (static and dynamic) are selected, and appropriately updated if need be. ASTERISK-27467 #close Change-Id: I7a920170f89c683af9505d4723a44fc6841decdb	8 years ago
Kevin Harwell	bd2218ce63	pjsip_options: dynamic contact's fields not updated on reload ... Dynamic contacts were not being properly updated on reload. As a matter of fact any changes to the AOR that a dynamic contact was associated with were not being applied. On reload, this patch makes it so for each dynamic contact, the associated AOR is now retrieved and the AOR's fields are applied to the contact. ASTERISK-27467 Change-Id: I8e3165dc6a745218c1c9db837f77fafa0516985d	8 years ago
Jenkins2	b0b28446c1	Merge "translate: Skip matrix_rebuild during shutdown."	8 years ago
George Joseph	d7f3f8c283	Merge "sounds_index: Avoid repeatedly reindexing."	8 years ago