asterisk

Commit Graph

Author	SHA1	Message	Date
Joshua Colp	963f94e99f	Fix a bug where audio on Google Voice would not work due to ignoring candidates. Instead of ignoring parts of the message that are not known just ignore the ones we know may be present and that would cause a problem. git-svn-id: https://origsvn.digium.com/svn/asterisk/branches/11@374877 65c4cc65-6c06-0410-ace0-fbb531ad65f3	13 years ago
Joshua Colp	59d02d37de	Remove code that should not have gotten in. (issue ASTERISK-20554) git-svn-id: https://origsvn.digium.com/svn/asterisk/branches/11@374851 65c4cc65-6c06-0410-ace0-fbb531ad65f3	13 years ago
Joshua Colp	385b30fbc6	Fix an issue where outgoing calls would fail to establish audio due to ICE negotiation failures. This change removes the requirement for ufrag and pwd in the transport stanza and also makes us the controlling agent. (closes issue ASTERISK-20554) Reported by: mmichelson git-svn-id: https://origsvn.digium.com/svn/asterisk/branches/11@374850 65c4cc65-6c06-0410-ace0-fbb531ad65f3	13 years ago
Matthew Jordan	7c522a5fd3	Fix incorrect billing duration reported when batch mode is enabled Similar to r369351, the billing duration can be skewed when batch mode is enabled. This happened much more rarely than the duration, as it only occured when the call was answered (thereby indicating an actual answer time) and immediately hung up on (indicating a billsec of 0). Since a billing time of '0' can either mean that the call immediately ended or that the CDR was improperly answered, we have to use additional information to know whether or not we can trust the CDR billsec value. Prior to this patch, we looked to see if we had a valid answer time. If we did, and billsec was zero, we used the current time to calculate what billsec value we could from the CDR being written. If batch mode is enabled, this will incorrectly report a billsec value being much greater than the actual duration of the call. Instead of relying on the presence of an answer time to know whether or not we can re-calculate the billsec for the CDR, we now also use the presence of the CDR's end time to know if we need to re-calculate or whether we can trust the billsec value that we have. This prevents erroneous jumps in the billsec value, while still making sure that in the worst case, some billing time will be calculated. (closes issue AST-1016) Reported by: Thomas Arimont Tested by: Thomas Arimont ........ Merged revisions 374843 from http://svn.asterisk.org/svn/asterisk/branches/1.8 ........ Merged revisions 374844 from http://svn.asterisk.org/svn/asterisk/branches/10 git-svn-id: https://origsvn.digium.com/svn/asterisk/branches/11@374845 65c4cc65-6c06-0410-ace0-fbb531ad65f3	13 years ago
Mark Michelson	b5f231501b	Don't make chan_sip export global symbols. During testing, it was discovered that having chan_sip export global symbols was problematic. The biggest problem was that load order was affected. Trying to use realtime could be problematic since in all likelihood the necessary realtime driver(s) would not be loaded before chan_sip. In addition, it was found that it was impossible to use the Digium Phone Module for Asterisk since it must be loaded before chan_sip since it must hook into chan_sip's configuration parsing. The solution is to use a virtual table in the same manner that other modules in Asterisk do, like app_voicemail. (closes issue ASTERISK-20545) Reported by: kmoore git-svn-id: https://origsvn.digium.com/svn/asterisk/branches/11@374842 65c4cc65-6c06-0410-ace0-fbb531ad65f3	13 years ago
Joshua Colp	d5dc7d8b03	Consider the Google Talk content stanza name (jin:content) valid. git-svn-id: https://origsvn.digium.com/svn/asterisk/branches/11@374833 65c4cc65-6c06-0410-ace0-fbb531ad65f3	13 years ago
Richard Mudgett	01a662cf60	app_queue: Made pass connected line updates from the caller to ringing queue members. Party A calls Party B Party B puts Party A on hold. Party B calls a queue. Ringing queue member D sees Party B identification. Party B transfers Party A to the queue. Queue member D does not get a connected line update for Party A. Queue member D answers the call and still sees Party B information. However, if Party A later transfers the call to Party C then queue member D gets a connected line update for Party C. * Made pass connected line updates from the caller to queue members while the queue members are ringing. (closes issue AST-1017) Reported by: Thomas Arimont (closes issue ABE-2886) Reported by: Thomas Arimont Tested by: rmudgett ........ Merged revisions 374801 from https://origsvn.digium.com/svn/asterisk/be/branches/C.3-bier ........ Merged revisions 374802 from http://svn.asterisk.org/svn/asterisk/branches/1.8 ........ Merged revisions 374803 from http://svn.asterisk.org/svn/asterisk/branches/10 git-svn-id: https://origsvn.digium.com/svn/asterisk/branches/11@374804 65c4cc65-6c06-0410-ace0-fbb531ad65f3	13 years ago
Kinsey Moore	841158f428	Fix segfault regression from r370681 Due to usage of ast_hook_send_action, AMI action handling code should be able to handle a NULL mansession->session. This would cause a crash on NULL dereference if action_originate was called from ast_hook_send_action. (closes issue ASTERISK-20544) git-svn-id: https://origsvn.digium.com/svn/asterisk/branches/11@374792 65c4cc65-6c06-0410-ace0-fbb531ad65f3	13 years ago
Richard Mudgett	1239385a58	Fix execution of 'i' extension due to uninitialized variable. The fix for ASTERISK-18243 added code that could potentially use dst_exten[] uninitialized. As a result the 'i' exten may not be executed when it should. (closes issue ASTERISK-20455) Reported by: Richard Miller Patches: pbx-1.8.16.0.diff (license #5685) patch uploaded by Richard Miller Made some cosmetic modifications. ........ Merged revisions 374758 from http://svn.asterisk.org/svn/asterisk/branches/1.8 ........ Merged revisions 374763 from http://svn.asterisk.org/svn/asterisk/branches/10 git-svn-id: https://origsvn.digium.com/svn/asterisk/branches/11@374771 65c4cc65-6c06-0410-ace0-fbb531ad65f3	13 years ago
Joshua Colp	332407b5f8	Improve logging for DTLS-SRTP failure situations. (closes issue ASTERISK-20487) Reported by: mjordan git-svn-id: https://origsvn.digium.com/svn/asterisk/branches/11@374756 65c4cc65-6c06-0410-ace0-fbb531ad65f3	13 years ago
Joshua Colp	749bd15c6f	Add a log message for when DTLS-SRTP is requested and the underlying engine does not support it. (closes issue ASTERISK-20487) Reported by: mjordan git-svn-id: https://origsvn.digium.com/svn/asterisk/branches/11@374755 65c4cc65-6c06-0410-ace0-fbb531ad65f3	13 years ago
Richard Mudgett	bf919dbaa5	dahdi.conf.sample: Add description for "buffers" setting. This contains an edited version of the patch originally created by John Bigelow. (closes issue ASTERISK-14435) Reported by: John Bigelow Patches: buffers.patch (license #5091) patch uploaded by John Bigelow 0001-dahdi.conf.sample-Add-description-for-buffers-settin.patch (license #5417) patch uploaded by Shaun Ruffell Modified ........ Merged revisions 374727 from http://svn.asterisk.org/svn/asterisk/branches/1.8 ........ Merged revisions 374728 from http://svn.asterisk.org/svn/asterisk/branches/10 git-svn-id: https://origsvn.digium.com/svn/asterisk/branches/11@374729 65c4cc65-6c06-0410-ace0-fbb531ad65f3	13 years ago
Richard Mudgett	337a4c70be	Fix deletion of unopenable spool files. If scan_service() cannot open the spool file, it logs a message saying that it will delete the file and calls remove_from_queue() to do it. However, remove_from_queue() fails to delete the spool file because struct outgoing has not yet been fully initialized. * Merged allocating a new struct outgoing and init_outgoing() into new_outgoing(). Allocation is initialization. * Made apply_outgoing() not initialize the spool filename in struct outgoing. * Made apply_outgoing() call ast_trim_blanks() and ast_skip_blanks() rather than manually inlining them. * Reduced indentation levels in apply_outgoing(). * Fixed a garbled comment in remove_from_queue(). * Reworked scan_service() to simplify it. (closes issue ASTERISK-17231) Reported by: David Chappell Patches: spool_open_failure.diff (license #4997) patch uploaded by David Chappell Started with this patch. ........ Merged revisions 374686 from http://svn.asterisk.org/svn/asterisk/branches/1.8 * Fixed some memory leaks on off nominal paths in init_outgoing() when merging into the new_outgoing() function dealing with o->capabilities. ........ Merged revisions 374695 from http://svn.asterisk.org/svn/asterisk/branches/10 git-svn-id: https://origsvn.digium.com/svn/asterisk/branches/11@374708 65c4cc65-6c06-0410-ace0-fbb531ad65f3	13 years ago
Matthew Jordan	3e9b01481a	Disable ICE support by default Since there are a number of legacy devices out there that fail to handle ICE candidates properly (which is a nice way of saying something much uglier), disable it by default. Support for ICE candidates can be enabled in rtp.conf using the icesupport setting. git-svn-id: https://origsvn.digium.com/svn/asterisk/branches/11@374676 65c4cc65-6c06-0410-ace0-fbb531ad65f3	13 years ago
Matthew Jordan	ec6bf83e28	Resolve issues in ConfBridge regarding marked, waitmarked, and unmarked users Thank's to Neil Tallim (flan)'s tireless testing, issue reporting, and patches it became clear that app_confbridge had some complex logic in how it handled interactions between marked, waitmarked, and unmarked users. In particular, there were some areas in which the interactions between the users resulted in inconsistent behavior, and app_confbridge was missing logic in how to handle some corner cases. Some areas included: * Poor handling of mixing unmarked and waitmarked users * Inconsistencies in how MOH and muting was applied to various users * Handling of various announcements for different user profile options flan's patches seem to fix the various issues, but highlighted how hard the code could be to maintain. In an attempt to make things easier to maintain and to more fully enumerate the various cases that exist, this patch breaks up the logic into a state machine-like setup. Please note that the various state transitioned are documented on the Asterisk wiki: https://wiki.asterisk.org/wiki/display/AST/Confbridge+state+changes Review: //https://reviewboard.asterisk.org/r/2072/ Note that for the following issues, mjordan uploaded the patch, although it was written by twilson. Any contributor license discrepency is due to that. (closes issue ASTERISK-19562) Reported by: flan Tested by: flan, mjordan, jrose patches: bugASTERISK-19562_ASTERISK-19726_ASTERISK-20181.patch uploaded by twilson (license 6283) (closes issue ASTERISK-19726) Reported by: flan Tested by: flan patches: bugASTERISK-19562_ASTERISK-19726_ASTERISK-20181.patch uploaded by twilson (license 6283) (closes issue ASTERISK-20181) Reported by: Jonathan White Tested by: Jonathan White patches: bugASTERISK-19562_ASTERISK-19726_ASTERISK-20181.patch uploaded by twilson (license 6283) ........ Merged revisions 374652 from http://svn.asterisk.org/svn/asterisk/branches/10 git-svn-id: https://origsvn.digium.com/svn/asterisk/branches/11@374657 65c4cc65-6c06-0410-ace0-fbb531ad65f3	13 years ago
Matthew Jordan	b8d2a62206	pjproject: Fix for Solaris builds. Do not undef s_addr. pjproject, in order to solve build problems on Windows [1], undefines s_addr in one of it's headers that is included in res_rtp_asterisk.c. On Solaris s_addr is not a structure member, but defined to map to the real strucuture member, therefore when building on Solaris it's possible to get build errors like: [CC] res_rtp_asterisk.c -> res_rtp_asterisk.o In file included from /export/home/admin/asterisk-11-svn/include/asterisk/stun.h:29, from res_rtp_asterisk.c:51: /export/home/admin/asterisk-11-svn/include/asterisk/network.h: In function `inaddrcmp': /export/home/admin/asterisk-11-svn/include/asterisk/network.h:92: error: structure has no member named `s_addr' /export/home/admin/asterisk-11-svn/include/asterisk/network.h:92: error: structure has no member named `s_addr' res_rtp_asterisk.c: In function `ast_rtp_on_ice_tx_pkt': res_rtp_asterisk.c:706: warning: dereferencing type-punned pointer will break strict-aliasing rules res_rtp_asterisk.c:710: warning: dereferencing type-punned pointer will break strict-aliasing rules res_rtp_asterisk.c: In function `rtp_add_candidates_to_ice': res_rtp_asterisk.c:1085: error: structure has no member named `s_addr' make[2]: * [res_rtp_asterisk.o] Error 1 make[1]: * [res] Error 2 make[1]: Leaving directory `/export/home/admin/asterisk-11-svn' gmake: *** [_cleantest_all] Error 2 Unfortunately, in order to make this work, I also had to make sure pjproject only used the typdef pj_in_addr and not the struct pj_in_addr so that when building Asterisk I could "typedef struct in_addr pj_in_addr". It's possible then that the library and users of those interfaces in Asterisk have a different idea about the type of the argument, while on the surface it looks like they are all 32 bit big endian values. [1] http://trac.pjsip.org/repos/changeset/484 (issues ASTERISK-20366) Reported by: Ben Klang Tested by: Ben Klang, mjordan patches: 0001-pjproject-Fix-for-Solaris-builds.-Do-not-undef-s.patch uploaded by Shaun Ruffell (license 5417) git-svn-id: https://origsvn.digium.com/svn/asterisk/branches/11@374642 65c4cc65-6c06-0410-ace0-fbb531ad65f3	13 years ago
Matthew Jordan	d99578264b	Trivial patch to make 'best_score' defined for all architectures. Fixes trivial build error on Solaris: acl.c: In function `get_local_address': acl.c:196: error: `best_score' undeclared (first use in this function) acl.c:196: error: (Each undeclared identifier is reported only once acl.c:196: error: for each function it appears in.) make[2]: *** [acl.o] Error 1 (issue ASTERISK-20366) Reported by: Ben Klang Tested by: Ben Klang patches: 0002-main-acl.c-Trivial.-best_score-should-be-defined-for.patch by Shaun Ruffell (license 5417) git-svn-id: https://origsvn.digium.com/svn/asterisk/branches/11@374632 65c4cc65-6c06-0410-ace0-fbb531ad65f3	13 years ago
Matthew Jordan	55b8cd2ec9	Handle capability stanzas that fail to provide node or version information While XEP-0115 states that the node and ver attributes are both required, some devices fail to provide either field. Prior to this patch, failure to provide the node or ver attribute would cause a crash in res_xmpp. While failing to provide the node or ver attribute is technically invalid, since this information is not utilized by Asterisk except for reporting purposes, for interoperability reasons, we continue to process the capability stanza anyways. (closes issue ASTERISK-20495) Reported by: Martin W Tested by: Martin W patches: 20495.patch uploaded by Martin W (license #6434) git-svn-id: https://origsvn.digium.com/svn/asterisk/branches/11@374622 65c4cc65-6c06-0410-ace0-fbb531ad65f3	13 years ago
Matthew Jordan	a7a10088f3	Update documentation for MessageSend application/command's From field for XMPP When using the channel technology agnostic application/AMI command MessageSend, the "From" field is technically optional for the SIP channel driver. However, if being sent by the XMPP resource module (either res_xmpp or res_jabber), the "From" field is necessary, and must correspond to a defined account. This patch updates the documentation for this application/AMI command to reflect this. (closes issue ASTERISK-20405) Reported by: Leif Madsen git-svn-id: https://origsvn.digium.com/svn/asterisk/branches/11@374611 65c4cc65-6c06-0410-ace0-fbb531ad65f3	13 years ago
David M. Lee	98f78d2c1d	Multiple revisions 374570,374581 ........ r374570 \| dlee \| 2012-10-05 15:14:41 -0500 (Fri, 05 Oct 2012) \| 22 lines Improve AMI long line error handling In AMI's parser, when it receives a long line (> 1024 characters), it discards that line, but continues to process the message normally. Typically, this is not a problem because a) who has lines that long and b) usually a discarded line results in an invalid message. But if that line is specifying an optional field, then the message will be processed, you get a 'Response: Success', but things don't work the way you expected them to. This patch changes the behavior when a line-too-long parse error occurs. * Changes the log message to avoid way-too-long (and truncated anyways) log messages * Adds a 'parsing' status flag to Response: Success * Sets parsing = MESSAGE_LINE_TOO_LONG if, well, a line is too long * Responds with an appropriate error if parsing != MESSAGE_OKAY (closes issue AST-961) Reported by: John Bigelow Review: https://reviewboard.asterisk.org/r/2142/ ........ r374581 \| dlee \| 2012-10-05 15:20:28 -0500 (Fri, 05 Oct 2012) \| 1 line I've committed too much. Reverting part of r374570. ........ Merged revisions 374570,374581 from http://svn.asterisk.org/svn/asterisk/branches/1.8 ........ Merged revisions 374586 from http://svn.asterisk.org/svn/asterisk/branches/10 git-svn-id: https://origsvn.digium.com/svn/asterisk/branches/11@374587 65c4cc65-6c06-0410-ace0-fbb531ad65f3	13 years ago
Richard Mudgett	f76557db58	Merged revisions 374515-374535 from https://origsvn.digium.com/svn/asterisk/be/branches/C.3-bier ................ r374515 \| rmudgett \| 2012-10-04 17:52:36 -0500 (Thu, 04 Oct 2012) \| 10 lines chan_misdn: Remove some deadcode * Made setup_bc() static. Patches: patch1_unused-code.diff (license #6372) patch uploaded by Guenther Kelleter Modified JIRA ABE-2882 ................ r374516 \| rmudgett \| 2012-10-04 18:01:01 -0500 (Thu, 04 Oct 2012) \| 7 lines chan_misdn: Remove unused bchan states Patches: patch2_unused-states.diff (license #6372) patch uploaded by Guenther Kelleter JIRA ABE-2882 ................ r374517 \| rmudgett \| 2012-10-04 18:17:51 -0500 (Thu, 04 Oct 2012) \| 16 lines chan_misdn: Remove unnecessary null pointer checks and checks for stack->nt * cleanup_bc() is always called with valid bc (or it would've crashed before). * Value of stack->nt is known in advance at some places. * Rename handle_event() to handle_event_te(), handle_frm() to handle_frm_te(). Patches: patch3_checks.diff (license #6372) patch uploaded by Guenther Kelleter Modified JIRA ABE-2882 ................ r374518 \| rmudgett \| 2012-10-04 18:21:59 -0500 (Thu, 04 Oct 2012) \| 7 lines chan_misdn: Fix spelling in log messages Patches: patch4_spelling.diff (license #6372) patch uploaded by Guenther Kelleter JIRA ABE-2882 ................ r374519 \| rmudgett \| 2012-10-04 18:31:59 -0500 (Thu, 04 Oct 2012) \| 15 lines chan_misdn: Don't cleanup a bc twice. In handle_frm_te() after calling misdn_lib_send_event(bc, EVENT_RELEASE_COMPLETE) bc is emptied, cleaned and set not in use, although misdn_lib_send_event() already did the same. This is bad. When it's not in use we are not allowed to touch it. * Moved log message in front of the resulting actions and fixed it to match the case. Patches: patch5_bccleanup.diff (license #6372) patch uploaded by Guenther Kelleter JIRA ABE-2882 ................ r374520 \| rmudgett \| 2012-10-04 18:43:56 -0500 (Thu, 04 Oct 2012) \| 12 lines chan_misdn: Fix memory leaks, bc, chan not cleaned up etc., really bad stuff. * Fix return codes of cb_events() for EVENT_SETUP to use caller's cleanup mechanisms. * Move cl_queue_chan() call after bearer check. Patches: patch6_leaks.diff (license #6372) patch uploaded by Guenther Kelleter JIRA ABE-2882 ................ r374521 \| rmudgett \| 2012-10-04 18:48:38 -0500 (Thu, 04 Oct 2012) \| 11 lines chan_misdn: We must initialize cause on sending a DISCONNECT. We must initialize cause on sending a DISCONNECT, so it is later correctly indicated to ast_channel in case the answer (RELEASE/RELEASE_COMPLETE) does not include one. Patches: patch7_hangupcause.diff (license #6372) patch uploaded by Guenther Kelleter JIRA ABE-2882 ................ r374522 \| rmudgett \| 2012-10-04 19:03:56 -0500 (Thu, 04 Oct 2012) \| 7 lines chan_misdn: Remove unused code for upqueue Patches: patch8_unused-upqueue.diff (license #6372) patch uploaded by Guenther Kelleter JIRA ABE-2882 ................ r374523 \| rmudgett \| 2012-10-04 19:11:50 -0500 (Thu, 04 Oct 2012) \| 7 lines chan_misdn: Improve debugging (port number, messages fixed, dups removed) Patches: patch9_debug.diff (license #6372) patch uploaded by Guenther Kelleter JIRA ABE-2882 ................ r374533 \| rmudgett \| 2012-10-05 12:17:18 -0500 (Fri, 05 Oct 2012) \| 8 lines chan_misdn: Better debug: we can print_bc_info even if there's no ast leg. Patches: patch10_debug-bc-2.diff (license #6372) patch uploaded by Guenther Kelleter Modified. JIRA ABE-2882 ................ r374534 \| rmudgett \| 2012-10-05 12:34:10 -0500 (Fri, 05 Oct 2012) \| 16 lines chan_misdn: setup_bc() is called too early for an incoming SETUP on TE. This prevents the B channel from being setup for HDLC mode when requested by the bearer capability and config option hdlc=yes. It violates ETS300102 Ch.5.2.3.2: "The user, in any case, must not connect to the channel until a CONNECT ACKNOWLEDGE message has been received." * Call setup_bc() on receipt of CONNECT_ACKNOWLEGDE for PTMP, and on first response to SETUP for PTP. Patches: abe-2881-2.diff (license #6372) patch uploaded by Guenther Kelleter Modified. JIRA ABE-2881 ................ r374535 \| rmudgett \| 2012-10-05 12:41:05 -0500 (Fri, 05 Oct 2012) \| 2 lines chan_misdn: Remove some more deadcode. ................ ........ Merged revisions 374536 from http://svn.asterisk.org/svn/asterisk/branches/1.8 ........ Merged revisions 374537 from http://svn.asterisk.org/svn/asterisk/branches/10 git-svn-id: https://origsvn.digium.com/svn/asterisk/branches/11@374538 65c4cc65-6c06-0410-ace0-fbb531ad65f3	13 years ago
Alec L Davis	ff8dce40f2	dsp.c User Configurable DTMF_HITS_TO_BEGIN and DTMF_MISSES_TO_END Instead of a recompile, allow values to be adjusted in dsp.conf For binary distributions allows easy adjustment for wobbly GSM calls, and other reasons. Defaults to DTMF_HITS_TO_BEGIN=2 and DTMF_MISSES_TO_END=3 (closes issue ASTERISK-17493) Reported by: alecdavis Tested by: alecdavis alecdavis (license 585) Review https://reviewboard.asterisk.org/r/2144/ ........ Merged revisions 374479 from http://svn.asterisk.org/svn/asterisk/branches/1.8 ........ Merged revisions 374481 from http://svn.asterisk.org/svn/asterisk/branches/10 git-svn-id: https://origsvn.digium.com/svn/asterisk/branches/11@374485 65c4cc65-6c06-0410-ace0-fbb531ad65f3	13 years ago
Alec L Davis	76436d2064	dsp.c fix incorrect DTMF Digit_Duration. it's always short by 'hits_to_begin*DTMF_GSIZE', or 25.5ms if hitstobegin=2 (issue ASTERISK-16003) Tested by: alecdavis alecdavis (license 585) Review https://reviewboard.asterisk.org/r/2145/ ........ Merged revisions 374475 from http://svn.asterisk.org/svn/asterisk/branches/1.8 ........ Merged revisions 374476 from http://svn.asterisk.org/svn/asterisk/branches/10 git-svn-id: https://origsvn.digium.com/svn/asterisk/branches/11@374477 65c4cc65-6c06-0410-ace0-fbb531ad65f3	13 years ago
David M. Lee	2659db6d61	Fix DBDelTree error codes for AMI, CLI and AGI The AMI DBDelTree command will return Success/Key tree deleted successfully even if the given key does not exist. The CLI command 'database deltree' had a similar problem, but was saved because it actually responded with '0 database entries removed'. AGI had a slightly different error, where it would return success if the database was unavailable. This came from confusion about the ast_db_deltree retval, which is -1 in the event of a database error, or number of entries deleted (including 0 for deleting nothing). * Changed some poorly named res variables to num_deleted * Specified specific errors when calling ast_db_deltree (database unavailable vs. entry not found vs. success) * Fixed similar bug in AGI database deltree, where 'Database unavailable' results in successful result (closes issue AST-967) Reported by: John Bigelow Review: https://reviewboard.asterisk.org/r/2138/ ........ Merged revisions 374426 from http://svn.asterisk.org/svn/asterisk/branches/1.8 ........ Merged revisions 374427 from http://svn.asterisk.org/svn/asterisk/branches/10 git-svn-id: https://origsvn.digium.com/svn/asterisk/branches/11@374428 65c4cc65-6c06-0410-ace0-fbb531ad65f3	13 years ago
Alec L Davis	259f43f421	dsp.c User configuration of DTMF_NORMAL_TWIST and DTMF_REVERSE_TWIST values Asterisk's DTMF Specifications are based on AT&T specs, which may not be compatible in other countries. Various countries have different specifications for the maximum power level differences between the DTMF low group and high group of frequencies. Power level difference between frequencies for different Administrations/RPOAs NTT = Max. 5 dB AT&T = 4dB(reverse) to 8dB(normal) Danish = Max. 6 dB Australian = Max. 10 dB Brazilian = Max. 9 dB ETSI = Max. 6 dB from ETSI ES 201 235-3 V1.3.1 (2006-03) Now allow 4 variables to be individually configured in dsp.conf, with reasonable min/max of 2dB to 20dB. Default is AT&T specifications Add's the following variables to dsp.conf ;dtmf_normal_twist=6.31 ;dtmf_reverse_twist=2.51 ;relax_dtmf_normal_twist=6.31 ;relax_dtmf_reverse_twist=3.98 (closes issue ASTERISK-20442) Reported by: tbsky Tested by: tbsky,alecdavis alecdavis (license 585) Review https://reviewboard.asterisk.org/r/2141/ ........ Merged revisions 374384 from http://svn.asterisk.org/svn/asterisk/branches/1.8 ........ Merged revisions 374385 from http://svn.asterisk.org/svn/asterisk/branches/10 git-svn-id: https://origsvn.digium.com/svn/asterisk/branches/11@374386 65c4cc65-6c06-0410-ace0-fbb531ad65f3	13 years ago
Alec L Davis	cc84ce722e	_dsp_init: bring inline with trunk preparation for clean merge of DTMF TWIST patch No functional changes, just style. alecdavis (license 585) Reported by: Alec Davis Tested by: alecdavis related https://reviewboard.asterisk.org/r/2141 ........ Merged revisions 374365 from http://svn.asterisk.org/svn/asterisk/branches/1.8 ........ Merged revisions 374370 from http://svn.asterisk.org/svn/asterisk/branches/10 git-svn-id: https://origsvn.digium.com/svn/asterisk/branches/11@374379 65c4cc65-6c06-0410-ace0-fbb531ad65f3	13 years ago
Matthew Jordan	d3d952c31b	Check for presence of buddy in info/dinfo handlers The res_jabber resource module uses the ASTOBJ library for managing its ref counted objects. After calling ASTOBJ_CONTAINER_FIND to locate a buddy object, the pointer to the object has to be checked to see if the buddy existed. Prior to this patch, the buddy object was not checked for NULL; with this patch in both aji_client_info_handler and aji_dinfo_handler the pointer is checked before used and, if no buddy object was found, the handlers return an error code. This patch does not take the approach that our JID can be used to log in from another resource. If that approach is desired, an improvement could be made to this patch to create the buddy on the fly. This patch seeks only to prevent Asterisk from crashing. FYI: In Asterisk 11+, you really should be using res_xmpp. It does not have this problem, as it moved to the astobj2 library. Note that multiple people have proposed patches for this issue; the patch being committed here is based on those. (closes issue ASTERISK-19532) Reported by: Karsten Wemheuer Tested by: Byron Clark patches: fix-jabber uploaded by Karsten Wemheuer (license #5930) xmpp_no_crash_with_ejabberd.patch uploaded by Byron Clark (license #6157) (closes issue ASTERISK-19557) Reported by: ulugutz ........ Merged revisions 374335 from http://svn.asterisk.org/svn/asterisk/branches/1.8 ........ Merged revisions 374336 from http://svn.asterisk.org/svn/asterisk/branches/10 git-svn-id: https://origsvn.digium.com/svn/asterisk/branches/11@374337 65c4cc65-6c06-0410-ace0-fbb531ad65f3	13 years ago
Matthew Jordan	ba781b68e9	Destroy the generic_monitors container after the core_instances in ccss For each item in core_instances disposed of in the shutdown of ccss, any generic monitor instances referenced by the objects will be removed from generic_monitors during their destruction. Hilarity ensues if generic_monitors no longer exists. Thanks to the Asterisk Test Suite's generic_ccss test for complaining loudly when it ran into this. ........ Merged revisions 374300 from http://svn.asterisk.org/svn/asterisk/branches/10 git-svn-id: https://origsvn.digium.com/svn/asterisk/branches/11@374301 65c4cc65-6c06-0410-ace0-fbb531ad65f3	13 years ago
Matthew Jordan	aa5ac80919	Ensure Shutdown AMI event is still fired during Asterisk shutdown Richard pointed out that having the manager dispose of itself gracefully during shutdown meant that the Shutdown event will no longer get fired. This patch moves the AMI event just prior to running the atexit callbacks. ........ Merged revisions 374230 from http://svn.asterisk.org/svn/asterisk/branches/1.8 ........ Merged revisions 374231 from http://svn.asterisk.org/svn/asterisk/branches/10 git-svn-id: https://origsvn.digium.com/svn/asterisk/branches/11@374248 65c4cc65-6c06-0410-ace0-fbb531ad65f3	13 years ago
Matthew Jordan	61ac420dfb	Fix findings from check-in on r374177 Richard pointed out two problems with the check-in from r374177: * The ast_msg_shutdown function declaration doesn't match the prototype in main/message.c. * The ref/alloc function usage in astobj2 (in trunk) can use the ao2_t_* variants of the functions to allow the REF_DEBUG flag to enable/disable their debug counterparts. ........ Merged revisions 374210 from http://svn.asterisk.org/svn/asterisk/branches/10 git-svn-id: https://origsvn.digium.com/svn/asterisk/branches/11@374211 65c4cc65-6c06-0410-ace0-fbb531ad65f3	13 years ago
Matthew Jordan	8943656ccc	Fix a variety of ref counting issues This patch resolves a number of ref leaks that occur primarily on Asterisk shutdown. It adds a variety of shutdown routines to core portions of Asterisk such that they can reclaim resources allocate duringd initialization. Review: https://reviewboard.asterisk.org/r/2137 ........ Merged revisions 374177 from http://svn.asterisk.org/svn/asterisk/branches/1.8 ........ Merged revisions 374178 from http://svn.asterisk.org/svn/asterisk/branches/10 git-svn-id: https://origsvn.digium.com/svn/asterisk/branches/11@374196 65c4cc65-6c06-0410-ace0-fbb531ad65f3	13 years ago
Sean Bright	1449b2cad0	app_queue: Support persisting and loading of long member lists. Greenlight in #asterisk brought up that he was receiving an error message "Could not create persistent member string, out of space" when running app_queue in Asterisk 10. dump_queue_members() made an assumption that 8K would be enough to store the generated string, but with queues that have large member lists this is not always the case. This patch removes the limitation and uses ast_str instead of a fixed sized buffer. The complicating factor comes from the fact that ast_db_get requires a buffer and buffer size argument, which doesn't let us pull back more than what we pass in, so I introduced a new ast_db_get_allocated() which returns an ast_strdup()'d copy of the value from astdb. As an aside, I did some testing on the maximum size of data that we can store in the BDB library we distribute and was able to store a 10MB string and retrieve it with no problems, so I feel this is a safe patch. Review: https://reviewboard.asterisk.org/r/2136/ ........ Merged revisions 374108 from http://svn.asterisk.org/svn/asterisk/branches/1.8 ........ Merged revisions 374135 from http://svn.asterisk.org/svn/asterisk/branches/10 git-svn-id: https://origsvn.digium.com/svn/asterisk/branches/11@374150 65c4cc65-6c06-0410-ace0-fbb531ad65f3	13 years ago
Sean Bright	0dd8b496cf	Use ast_copy_string instead of strncpy to guarantee a NUL terminated string. ........ Merged revisions 374132 from http://svn.asterisk.org/svn/asterisk/branches/10 git-svn-id: https://origsvn.digium.com/svn/asterisk/branches/11@374133 65c4cc65-6c06-0410-ace0-fbb531ad65f3	13 years ago
Mark Michelson	17aa64c20e	Don't destroy confbridge config when error is encountered during a reload. Not panicking means that the old config is kept. (closes issue ASTERISK-20458) Reported by: Leif Madsen Patches: ASTERISK-20458.patch uploaded by Mark Michelson(license #5049) Tested by Leif Madsen git-svn-id: https://origsvn.digium.com/svn/asterisk/branches/11@374106 65c4cc65-6c06-0410-ace0-fbb531ad65f3	13 years ago
Matthew Jordan	30d590a970	Fix ref leak when adding ICE candidates to an SDP There was a missing decrement to the reference count for the current ICE candidate when local candidates are being added to an outbound SDP. This patch corrects that. git-svn-id: https://origsvn.digium.com/svn/asterisk/branches/11@374085 65c4cc65-6c06-0410-ace0-fbb531ad65f3	13 years ago
Jonathan Rose	55095aed83	res_jabber: Remove CLI command 'jabber test' The opinion of development was that it is both improper to have Matt's personal email address used in the source and that the command wouldn't be useful without it. (closes issue AST-467) Reported by: Malcolm Davenport ........ Merged revisions 374032 from http://svn.asterisk.org/svn/asterisk/branches/1.8 ........ Merged revisions 374045 from http://svn.asterisk.org/svn/asterisk/branches/10 git-svn-id: https://origsvn.digium.com/svn/asterisk/branches/11@374059 65c4cc65-6c06-0410-ace0-fbb531ad65f3	13 years ago
Brent Eagles	ad8f06037b	Reset hangup flags on channels created through messages and cleanup globals in res_xmpp on unload. This patch fixes an issue where hangup flags were not being reset on a channel, affecting subsequent use of that channel. The patch also adds some additional cleanup to res_xmpp to fix an issue with reloading the module. (closes ASTERISK-20360) Reported by: Noah Engelberth Tested by: beagles Review: https://reviewboard.asterisk.org/r/2134/ git-svn-id: https://origsvn.digium.com/svn/asterisk/branches/11@374019 65c4cc65-6c06-0410-ace0-fbb531ad65f3	13 years ago
Joshua Colp	53d2e20963	Update documentation to make it explicit that "stream file" will not restart musiconhold. (issue ASTERISK-17367) Reported by: oej ........ Merged revisions 373989 from http://svn.asterisk.org/svn/asterisk/branches/1.8 ........ Merged revisions 373990 from http://svn.asterisk.org/svn/asterisk/branches/10 git-svn-id: https://origsvn.digium.com/svn/asterisk/branches/11@373991 65c4cc65-6c06-0410-ace0-fbb531ad65f3	13 years ago
Richard Mudgett	7a822e7f55	Fix SendDTMF crash and channel reference leak using channel name parameter. The SendDTMF channel name parameter has two issues. 1) Crashes if the channel name does not exist. 2) Leaks a channel reference if the channel is the current channel. Problem introduced by ASTERISK-15956. * Updated SendDTMF documentation. * Renamed app to senddtmf_name and tweaked the type. ........ Merged revisions 373945 from http://svn.asterisk.org/svn/asterisk/branches/1.8 ........ Merged revisions 373946 from http://svn.asterisk.org/svn/asterisk/branches/10 git-svn-id: https://origsvn.digium.com/svn/asterisk/branches/11@373954 65c4cc65-6c06-0410-ace0-fbb531ad65f3	13 years ago
Joshua Colp	f8e894e031	Make res_http_websocket an optional dependency on supported platforms for chan_sip. (closes issue ASTERISK-20439) Reported by: sruffell Patches: 0001-chan_sip-websocket-support-is-an-optional-API.patch uploaded by sruffell (license 5417) git-svn-id: https://origsvn.digium.com/svn/asterisk/branches/11@373914 65c4cc65-6c06-0410-ace0-fbb531ad65f3	13 years ago
Joshua Colp	302cc28472	loader: Ensure dependent modules are properly initialized. If an Asterisk module specifies a dependency in ast_module_info.nonoptreq, it is possible for Asterisk to skip calling the modules's .load function. Asterisk was loading and linking the module via load_dynamic_module() but was not adding the module to the resource_heap. Therefore the module was not initialized based on it's priority along with the other modules in the heap. Now use load_resource() instead of load_dynamic_module() for non-optional requirement. This will add the module to the resource_heap so the module can be properly initialized in the correct order. This is required if there are any module global data structures initialized in the .load() callback for the module on platforms which do not support weak references. (issue ASTERISK-20439) Reported by: sruffell Patches: 0001-loader-Ensure-dependent-modules-are-properly-initial.patch uploaded by sruffell (license 5417) ........ Merged revisions 373909 from http://svn.asterisk.org/svn/asterisk/branches/1.8 ........ Merged revisions 373910 from http://svn.asterisk.org/svn/asterisk/branches/10 git-svn-id: https://origsvn.digium.com/svn/asterisk/branches/11@373911 65c4cc65-6c06-0410-ace0-fbb531ad65f3	13 years ago
Joshua Colp	5e0aff508c	Fix an issue where Local channels dialed by app_queue are considered in use immediately. The chan_local channel driver returns a device state of in use even if a created Local channel has not yet been dialed. This fix changes the logic to return a state of not in use until the channel itself has been dialed. (closes issue ASTERISK-20390) Reported by: tim_ringenbach Review: https://reviewboard.asterisk.org/r/2116/ ........ Merged revisions 373878 from http://svn.asterisk.org/svn/asterisk/branches/1.8 ........ Merged revisions 373879 from http://svn.asterisk.org/svn/asterisk/branches/10 git-svn-id: https://origsvn.digium.com/svn/asterisk/branches/11@373880 65c4cc65-6c06-0410-ace0-fbb531ad65f3	13 years ago
Mark Michelson	70cb09cd56	Move handling of 408 response so there is no misleading warning message. (closes issue ASTERISK-20060) Reported by: Walter Doekes ........ Merged revisions 373848 from http://svn.asterisk.org/svn/asterisk/branches/1.8 ........ Merged revisions 373849 from http://svn.asterisk.org/svn/asterisk/branches/10 git-svn-id: https://origsvn.digium.com/svn/asterisk/branches/11@373850 65c4cc65-6c06-0410-ace0-fbb531ad65f3	13 years ago
Richard Mudgett	33fcc48c91	Fixed meetme tab completion and command documentation. * Removed unnecessary case sensitivity in meetme list, lock, unlock, mute, unmute, and kick commands. * Separated meetme lock/unlock, mute/unmute, and kick commands into their own registered commands to simplify tab completion and parameter checking. meetme_lock_cmd(), meetme_mute_cmd(), and meetme_kick_cmd() * Simplified meetme_show_cmd() (closes issue AST-1006) Reported by: John Bigelow Tested by: rmudgett ........ Merged revisions 373815 from http://svn.asterisk.org/svn/asterisk/branches/1.8 ........ Merged revisions 373816 from http://svn.asterisk.org/svn/asterisk/branches/10 git-svn-id: https://origsvn.digium.com/svn/asterisk/branches/11@373818 65c4cc65-6c06-0410-ace0-fbb531ad65f3	13 years ago
Alec L Davis	5a0a5745ed	app_queue: 'agent available' hint, cleanup restart, and initial state Fix previously untested senarios; 1). On queue initialisation set queue_avail devstate to INUSE. Previously was unavailable, which indicated an agent was available. 2). When removing members, if there are no other members available, set queue_avail to INUSE. Previously, if a member interface had become 'unavailable', they were never going to be removed, particularly when persistant queues is enabled. 3). When adding a member, check that they are available, if they are set queue_avail to NOT_INUSE. Previously on reloaded, members may have been 'unavailable'. 4). When pausing or unpausing a member, set appropriate queue availability. alecdavis (license 585) Reported by: Alec Davis Tested by: alecdavis Review: https://reviewboard.asterisk.org/r/2129/ git-svn-id: https://origsvn.digium.com/svn/asterisk/branches/11@373804 65c4cc65-6c06-0410-ace0-fbb531ad65f3	13 years ago
Mark Michelson	8501e95d97	Fix saying of date in Dutch. The Dutch say the date before the month. (closes issue ASTERISK-20353) Reported by: Teun Ouwehand ........ Merged revisions 373773 from http://svn.asterisk.org/svn/asterisk/branches/1.8 ........ Merged revisions 373774 from http://svn.asterisk.org/svn/asterisk/branches/10 git-svn-id: https://origsvn.digium.com/svn/asterisk/branches/11@373775 65c4cc65-6c06-0410-ace0-fbb531ad65f3	13 years ago
Mark Michelson	d9e1cec84a	Remove dead code and documentation for nonexistent feature. multiplelogin was removed from chan_agent back in 1.6.0 when AgentCallbackLogin() was removed. (closes issue AST-948) reported by Steve Pitts ........ Merged revisions 373768 from http://svn.asterisk.org/svn/asterisk/branches/1.8 ........ Merged revisions 373769 from http://svn.asterisk.org/svn/asterisk/branches/10 git-svn-id: https://origsvn.digium.com/svn/asterisk/branches/11@373770 65c4cc65-6c06-0410-ace0-fbb531ad65f3	13 years ago
Mark Michelson	46ecb0a53f	Fix error where improper IMAP greetings would be deleted. (closes issue ASTERISK-20435) Reported by: fhackenberger Patches: asterisk-20435-imap-del-greeting.diff uploaded by Michael L. Young (License #5026) (with suggested modification made by me) ........ Merged revisions 373735 from http://svn.asterisk.org/svn/asterisk/branches/1.8 ........ Merged revisions 373737 from http://svn.asterisk.org/svn/asterisk/branches/10 git-svn-id: https://origsvn.digium.com/svn/asterisk/branches/11@373738 65c4cc65-6c06-0410-ace0-fbb531ad65f3	13 years ago
Joshua Colp	59c9a7205a	Fix T.38 support when used with chan_local in between. Users of the T.38 API can indicate AST_T38_REQUEST_PARMS on a channel to request that the channel indicate a T.38 negotiation with the parameters present on the channel. The return value of this indication is expected to be AST_T38_REQUEST_PARMS upon success but with chan_local involved this could never occur. This fix changes chan_local to always return AST_T38_REQUEST_PARMS for this situation. If the underlying channel technology on the other side does not support T.38 this would have been determined ahead of time using ast_channel_get_t38_state and an indication would not occur. (closes issue ASTERISK-20229) Reported by: wdoekes Patches: ASTERISK-20229.patch uploaded by wdoekes (license 5674) Review: https://reviewboard.asterisk.org/r/2070/ ........ Merged revisions 373705 from http://svn.asterisk.org/svn/asterisk/branches/1.8 ........ Merged revisions 373706 from http://svn.asterisk.org/svn/asterisk/branches/10 git-svn-id: https://origsvn.digium.com/svn/asterisk/branches/11@373707 65c4cc65-6c06-0410-ace0-fbb531ad65f3	13 years ago
Kinsey Moore	dac70de657	Recorded merge of revisions 373703 from http://svn.asterisk.org/svn/asterisk/branches/10 ........ Fix an issue where media would not flow for situations where the legacy STUN code is in use. The STUN packets should not be blocked by strict RTP. (closes issue ASTERISK-20415) Reported by: Michele Cicciotti patches: uploaded by Joshua Colp (trunk r369817) ........ Merged revisions 373702 from http://svn.asterisk.org/svn/asterisk/branches/1.8 git-svn-id: https://origsvn.digium.com/svn/asterisk/branches/11@373704 65c4cc65-6c06-0410-ace0-fbb531ad65f3	13 years ago

1 2 3 4 5 ...

23014 Commits (963f94e99f6cd31be77caf2362a70aec40a39fd2) All Branches Search

23014 Commits (963f94e99f6cd31be77caf2362a70aec40a39fd2)

All Branches