1098 Commits (7af1aae57f5d4b1debc1fa18b34fb1a33b0f9965)

Author	SHA1	Message	Date
Mark Michelson	7af1aae57f	Bump ARI version to 2.0.0 ... In order to not have version number overlap between different versions of Asterisk, each new major version of Asterisk will mean we also bump the ARI major version number. This particular change does NOT introduce any known breaking changes to ARI. For discussion relating to this topice, see: http://lists.digium.com/pipermail/asterisk-dev/2016-November/075964.html Change-Id: I712ee0df177a8fe1252da2bc029705268b97b665	9 years ago
zuul	fdea7fe9e4	Merge "res/ari/resource_bridges: Add the ability to manipulate the video source" into 14	9 years ago
Matt Jordan	62cbcb2e54	res/ari/resource_bridges: Add the ability to manipulate the video source ... In multi-party bridges, Asterisk currently supports two video modes: * Follow the talker, in which the speaker with the most energy is shown to all participants but the speaker, and the speaker sees the previous video source * Explicitly set video sources, in which all participants see a locked video source Prior to this patch, ARI had no ability to manipulate the video source. This isn't important for two-party bridges, in which Asterisk merely relays the video between the participants. However, in a multi-party bridge, it can be advantageous to allow an external application to manipulate the video source. This patch provides two new routes to accomplish this: (1) setVideoSource: POST /bridges/{bridgeId}/videoSource/{channelId} Sets a video source to an explicit channel (2) clearVideoSource: DELETE /bridges/{bridgeId}/videoSource Removes any explicit video source, and sets the video mode to talk detection ASTERISK-26595 #close Change-Id: I98e455d5bffc08ea5e8d6b84ccaf063c714e6621	9 years ago
Sebastien Duthil	eb5077fb26	res_ari: Add support for channel variables in ARI events. ... This works the same as for AMI manager variables. Set "channelvars=foo,bar" in your ari.conf general section, and then the channel variables "foo" and "bar" (along with their values), will appear in every Stasis websocket channel event. ASTERISK-26492 #close patches: ari_vars.diff submitted by Mark Michelson Change-Id: I5609ba239259577c0948645df776d7f3bc864229	9 years ago
Joshua Colp	90389f6b7d	app_queue: Add mention of 'ABANDON' variable to CHANGES. ... ASTERISK-26558 Change-Id: I1127010181e79c8ac291f72f036cb8e430dc7f7e	9 years ago
Alexander Traud	6445f21caa	rtp_engine: Allow more than 32 dynamic payload types. ... Since adding all remaining rates of Signed Linear (ASTERISK-24274) and SILK (Gerrit 3136), only one RTP Payload Type is left in the dynamic range (96-127). RFC 3551 section 3 allows to reassign other ranges. Consequently, when the dynamic range is exhausted, you can go for "rtp_pt_dynamic = 35" (or 0) in asterisk.conf. This enables the range 35-63 (or 0-63) giving room for another 29 (or 64) payload types. ASTERISK-26311 #close Change-Id: I7bc96ab764bc30098a178b841cbf7146f9d64964	9 years ago
Matt Jordan	1a3e699316	res/stasis: Add CLI commands for displaying/debugging ARI apps ... This patch adds three new CLI commands: - ari show apps: list the registered ARI applications - ari show app: show detailed information about an ARI application - ari set debug: dump events being sent to an ARI application Note that while these CLI commands live in the res_stasis module, we use the 'ari' family for these commands. This was done as most users of Asterisk aren't aware of the semantic differences between ARI and res_stasis, and some 'ari' CLI commands already exist. ASTERISK-26488 #close Change-Id: I51ad6ff0cabee0d69db06858c13f18b1c513c9f5	9 years ago
Joshua Colp	791d2319ce	pjsip: Fix a few media bugs with reinvites and asymmetric payloads. ... When channel format changes occurred as a result of an RTP re-negotiation the bridge was not informed this had happened. As a result the bridge technology was not re-evaluated and the channel may have been in a bridge technology that was incompatible with its formats. The bridge is now unbridged and the technology re-evaluated when this occurs. The chan_pjsip module also allowed asymmetric codecs for sending and receiving. This did not work with all devices and caused one way audio problems. The default has been changed to NOT do this but to match the sending codec to the receiving codec. For users who want asymmetric codecs an option has been added, asymmetric_rtp_codec, which will return chan_pjsip to the previous behavior. The codecs returned by the chan_pjsip module when queried by the bridge_native_rtp module were also not reflective of the actual negotiated codecs. The nativeformats are now returned as they reflect the actual negotiated codecs. ASTERISK-26423 #close Change-Id: I6ec88c6e3912f52c334f1a26983ccb8f267020dc	9 years ago
zuul	7c3cc1b605	Merge "pjsip: Support dual stack automatically." into 14	9 years ago
Joshua Colp	47de0ee4f6	pjsip: Support dual stack automatically. ... This change adds support for dual stack automatically. No configuration is required and the IP address and version in the SIP messages and SDP will be automatically changed based on the transport over which the message is being sent. RTP usage has also been changed to listen on both IPv4 and IPv6 simultaneously to allow media to flow, and to allow ICE support on both simultaneously. This also allows failover between IPv6 and IPv4 to work as expected. ASTERISK-26309 #close Change-Id: I235a421d8f9a326606d861b449fa6fe3a030572d	9 years ago
Michael Walton	494bebeb6f	res_rtp_asterisk: Add ice_blacklist option ... Introduces ice_blacklist configuration in rtp.conf. Subnets listed in the form ice_blacklist = <subnet spec>, e.g. ice_blacklist = 192.168.1.0/255.255.255.0, are excluded from ICE host, srflx and relay discovery. This is useful for optimizing the ICE process where a system has multiple host address ranges and/or physical interfaces and certain of them are not expected to be used for RTP. Multiple ice_blacklist configuration lines may be used. If left unconfigured, all discovered host addresses are used, as per previous behavior. Documention in rtp.conf.sample. ASTERISK-26418 #close Change-Id: Ibee88f80d7693874fda1cceaef94a03bd86012c9	9 years ago
Matt Jordan	ebcbc9ee34	res/ari: Add the Asterisk EID field to outgoing events ... This patch adds the Asterisk EID field to all outgoing ARI events. Because this field should be added to all events as they are transmitted, it is appended to the JSON message just prior to it being handed off to the application message handler. This makes it somewhat resilient to both new events being added to ARI, as well as other potential event transport mechanisms. ASTERISK-26470 #close Change-Id: Ieff0ecc24464e83f3f44e9c3e7bd9a5d70b87a1d	9 years ago
George Joseph	90f8ba8800	app_dial: Add the "Q" option to set the cause on unanswered channels ... The "Q" option will set the cause on the unanswered channels when another channel answers. It overrides the default of ANSWERED_ELSEWHERE. NOTE: chan_sip does not support setting the cause on a CANCEL to anything other than ANSWERED_ELSEWHERE. ASTERISK-26446 #close Change-Id: I71742e0919aaa16784c30a2b2e73fbeed7672e47	9 years ago
Tzafrir Cohen	29e096cd13	sd_notify (systemd status notifications) support ... sd_notify() is used to notify systemd of changes to the status of the process. This allows the systemd daemon to know when the process finished loading (and thus only start another program after Asterisk has finished loading). To use this, use a systemd unit with 'Type=notify' for Asterisk. This commit also adds the function ast_sd_notify(), a wrapper around sd_notify that does nothing if not built with systemd support. Also adds support for libsystemd detection in the configure script. Change-Id: Ied6a59dafd5ef331c5c7ae8f3ccd2dfc94be7811 (cherry picked from commit 07b95f7c65)	9 years ago
Joshua Colp	92deae3bb1	Merge "chan_sip: Enable Session-Timers for SIP over TCP (and TLS)." into 14	9 years ago
Alexander Traud	b3802e68b8	chan_sip: Enable Session-Timers for SIP over TCP (and TLS). ... Asterisk defaults to timers=accept/refresher=uas. In that scenario, only in that scenario, Sessions-Timers (RFC 4028) had no effect via TCP. This change enables Session-Timers for SIP over TCP (and for SIP over TLS). However with longer international calls via TCP, the SIP channel might break, because all hops on the Internet route must stay online (have not a single power outage, for example). Therefore with Session-Timers enabled (which are enabled at default), you might see dropped calls. Consequently even with this change, you might be better-off going for session-timers=refuse in your sip.conf. ASTERISK-19968 #close Change-Id: I1cd33453c77c56c8e1394cd60a6f17bb61c1d957 (cherry picked from commit 66c9dfb272)	9 years ago
Richard Mudgett	b7ec070cd7	res_pjsip: Add ignore_uri_user_options option. ... This implements the chan_sip legacy_useroption_parsing option but with a better name. * Made the caller-id number and redirecting number strings obtained from incoming SIP URI user fields always truncated at the first semicolon. People don't care about anything after the semicolon showing up on their displays even though the RFC allows the semicolon. ASTERISK-26316 #close Reported by: Kevin Harwell Change-Id: Ib42b0e940dd34d84c7b14bc2e90d1ba392624f62	9 years ago
Mark Michelson	999b34301b	ConfBridge: Make some announcements asynchronous. ... Confbridge announcements tend to block a channel while they are being played. In some circumstances, this is warranted since you want that particular channel not to hear the announcement (Example: "John Doe has entered the conference"). For others it makes less sense. This change first introduces methods for playing sounds asynchronously into the conference. This is very similar to how synchronous sounds are played, except the channel initiating the playback does not wait for the sound to complete before moving on. Asynchronous announcements are used for two circumstances: * Sounds played for a user after they have left the bridge * Sounds that play first to a single user and then the rest of the conference (if the channel and conference use the same language) ASTERISK-26289 #close Reported by Mark Michelson Change-Id: Ie486bb3de1646d50894489030326a423e594ab0a	9 years ago
George Joseph	8b6f9dde14	build: Add download capability for external packages ... The DPMA and g729a, silk, siren7 and siren14 codecs hosted at http://downloads.digium.com/pub/telephony/ are now listed in the "External" sections of the "Resource Modules" and "Codec Translators" pages in menuselect. Any that are selected will automatically be downloaded and installed when "make install" is run. Their LICENSE and README (if avaialble) files will be installed to ASTVARLIBDIR/documentation/thirdparty/<product_name>. Example use with codecs: The codecs/codecs.xml file is a menuselect style xml file that lists the codecs to be included. Their support levels are 'external', which triggers the download and install, and defaultenabled is no. Also because codec_g729a is actually in a directory named codec_g729 on the download server, the newly added 'member_data' element is used to override the default of the directory name being the package name. You can use the 'directory_name' attribute to keep default base URL (http://downloads.digium.com/pub/telephony/) but use the new directory, or you use the 'remote_url' attribute to specify a full URL to the download directory. In this case, you must still follow the same subdirectory naming conventions as that used for the packages located at 'http://downloads.digium.com/pub/telephony'. A new configure option '--with-externals-cache' was added and like '--with-sounds-cache' it allows the installer to cache tarballs so they're not downloaded every time. To assist with the download and install process, each external package now has a manifest.xml file that, among other things, contains a package version and checksums for each file in the tarball. The manifest is saved to both the cache directory and ASTMODDIR and together with the manifest.xml on the downloads site, tells the install scripts whether a download and/or update is needed. bash and xmlstarlet are required for downloader operation. If they're not installed, the external items in menuselect will be unavailable. Change-Id: Id3dcf1289ffd3cb0bbd7dfab3cafbb87be60323a	9 years ago
Richard Mudgett	a8771d7a71	res_pjsip: Cache global config options. ... We may check a global config option hundreds of times a second or more. Asking sorcery for the global configuration from the config files backend involves several allocations and container traversals. Using realtime without a memory cache is a lot worse because you have to lookup in the realtime database each time to reconstitute the sorcery object. With a memory cache for realtime, there is about the same amount of overhead as for config files. Either way, it is still fairly expensive to access the sorcery object that much. * Cache the global config options so we can access them faster. You must now always perform a res_pjsip reload to change the global options. Change-Id: Ice16c7a4cbca4614da344aaea21a072b86263ef7	9 years ago
George Joseph	f87af89396	res_pjsip: Add contact_user to endpoint ... contact_user, when specified on an endpoint, will override the user portion of the Contact header on outgoing requests. Change-Id: Icd4ebfda2f2e44d3ac749d0b4066630e988407d4	9 years ago
George Joseph	96887cc110	autohints: Update CHANGES and extensions.conf.sample ... Make it clear that we're talking about device state hints and add an entry to the sample config. Change-Id: Iaef58ffb960191a21b713e8e0b51ce1fcd47e433	9 years ago
Matt Jordan	eec60dd773	channels/chan_pjsip: Add PJSIP_SEND_SESSION_REFRESH ... This patch adds a new PJSIP specific dialplan function, PJSIP_SEND_SESSION_REFRESH. When invoked on a PJSIP channel, the media session will be refreshed via either an UPDATE or re-INVITE request. When used in conjunction with the PJSIP_MEDIA_OFFER dialplan function, the formats in use on a PJSIP channel can be re-negotiated and changed dynamically after call setup. ASTERISK-26277 #close Change-Id: Ib98fe09ba889aafe26d58d32f0fd1323f8fd9b1b	9 years ago
Alexei Gradinari	4d6d3eb268	res_pjsip_mwi: fix unsolicited mwi blocks PJSIP stack ... The PJSIP taskprocessors could be overflowed on startup if there are many (thousands) realtime endpoints configured with unsolicited mwi. The PJSIP stack could be totally unresponsive for a few minutes after boot completed. This patch creates a separate PJSIP serializers pool for mwi and makes unsolicited mwi use serializers from this pool. This patch also adds 2 new global options to tune taskprocessor alert levels: 'mwi_tps_queue_high' and 'mwi_tps_queue_low'. This patch also adds new global option 'mwi_disable_initial_unsolicited' to disable sending unsolicited mwi to all endpoints on startup. If disabled then unsolicited mwi will start processing on next endpoint's contact update. ASTERISK-26230 #close Change-Id: I4c8ecb82c249eb887930980a800c9f87f28f861a	9 years ago
Alexei Gradinari	5d74c0ea30	app_voicemail: Add taskprocessor alert level options. ... On heavy loaded system with IMAP or DB storage, 'app_voicemail' taskprocessor queue could reach 500 scheduled tasks. It could happen when the IMAP or DB server dies or is unreachable. It could happen on startup when there are many (thousands) realtime endpoints configured with unsolicited mwi. If the taskprocessor queue reaches the high water level then the alert is triggered and pjsip stops processing new requests until the queue reaches the low water level to clear the alert. This patch adds 2 new 'general' configuration options to tune taskprocessor alert levels: 'tps_queue_high' - Taskprocessor high water alert trigger level. 'tps_queue_low' - Taskprocessor low water clear alert level ASTERISK-26229 #close Change-Id: I766294fbffedf64053c0d9ac0bedd3109f043ee8	9 years ago
zuul	e7fc209b26	Merge "codecs: Add iLBC 20." into 14	9 years ago
Alexander Traud	c82f24f36a	codecs: Add iLBC 20. ... Asterisk already supported iLBC 30. This change adds iLBC 20. Now, Asterisk defaults to iLBC 20 but falls back to iLBC 30, when the remote party requests this. ASTERISK-26218 #close ASTERISK-26221 #close Reported by: Aaron Meriwether Change-Id: I07f523a3aa1338bb5217a1bf69c1eeb92adedffa	9 years ago
Richard Mudgett	c03e27c1c8	chan_dahdi: Add faxdetect_timeout option. ... The new option allows the channel driver's faxdetect option to timeout on a call after the specified number of seconds into a call. The new feature is disabled if the timeout is set to zero. The option is disabled by default. * Don't clear dsp_features after passing them to the dsp code in my_pri_ss7_open_media(). We should still remember them especially for the new faxdetect_timeout option. ASTERISK-26214 Reported by: Richard Mudgett Change-Id: Ieffd3fe788788d56282844774365546dce8ac810	9 years ago
Richard Mudgett	d11731ac2f	res_pjsip: Add fax_detect_timeout endpoint option. ... The new endpoint option allows the PJSIP channel driver's fax_detect endpoint option to timeout on a call after the specified number of seconds into a call. The new feature is disabled if the timeout is set to zero. The option is disabled by default. ASTERISK-26214 Reported by: Richard Mudgett Change-Id: Id5a87375fb2c4f9dc1d4b44c78ec8735ba65453d	9 years ago
Alexander Traud	85212f2799	res_rtp_asterisk: Enable Forward Secrecy (PFS) for DTLS. ... Since July 2014, TLS based protocols (SIP over TLS, Secure WebSockets, HTTPS) support PFS thanks to ASTERISK-23905. In July 2015, the same feature was added for DTLS. The source code from main/tcptls.c should have been re-used to ease security audits. Therefore, this change rolls back the change from July 2015 and re-uses the code from July 2014. This has the additional benefits to work under CentOS 7 and enabling not just ECDHE but DHE based cipher suites as well. ASTERISK-25659 #close Reported by: StefanEng86, urbaniak, pay123 Tested by: sarumjanuch, traud patches: res_rtp_asterisk.patch submitted by sarumjanuch dtls_centos_step_1.patch submitted by traud dtls_centos_step_2.patch submitted by traud Change-Id: I537cadf4421f092a613146b230f2c0ee1be28d5c	9 years ago
Joshua Colp	e049248161	Merge "res_pjsip: Fix statsd regression."	9 years ago
Richard Mudgett	b85446d039	res_pjsip: Fix statsd regression. ... The ASTERISK-25904 change-id I8fad8aae9305481469c38d2146e1ba3a56d3108f patch introduced several regressions when the newly created "Updated" state goes out for each endpoint registration refresh. 1) It restarted any OPTIONS RTT ping cycle. 2) It would interfere with a currently active ping and throw off that ping's resulting RTT calculation. 3) It cleared the RTT time each time the endpoint was refreshed. 4) The cleared RTT time was sent out as a statsd update each time. 5) It created two AMI events for each update. * Revert the original patch and reimplement it. Now the current contact status state is re-sent instead of the state being momentarily toggled every time the endpoint refreshes its registration. The statsd events are not created for the re-sent refresh because they are sent after every OPTIONS ping. ASTERISK-26160 #close Reported by: Matt Jordan Change-Id: Ie072be790fbb2a8f5c1c874266e4143fa31f66d1	9 years ago
Alexei Gradinari	1c949eea6c	res_pjsip: Added "subscribe_context" to endpoint ... If specified, incoming SUBSCRIBE requests will be searched for the matching extension in the indicated context. If no "subscribe_context" is specified, then the "context" setting is used. ASTERISK-25471 #close Change-Id: I3fb7a15f5bc154079bd348c08b7ad1cdd2d5e514	9 years ago
Joshua Colp	827c47b746	Merge "Add support for OGG/Speex file format"	9 years ago
Timo Teräs	56bdf048d2	Add support for OGG/Speex file format ... ASTERISK-18995 #close Change-Id: I98518bd28fc8f95668b3fe27d2cab45045ff3f7a	10 years ago
Richard Mudgett	df2791da8f	pjsip_distributor.c: Ignore messages until fully booted. ... We should not be processing any incoming messages until we are fully booted. We may not have dialplan or other needed configuration loaded yet. ASTERISK-26089 #close Reported by: Scott Griepentrog ASTERISK-26088 Reported by: Richard Mudgett Change-Id: I584aefb4f34b885a8927e1f13a2c64babd606264	10 years ago
Joshua Colp	5164e1fd85	Merge "chan_rtp.c: Simplify options to UnicastRTP channel creation."	10 years ago
Joshua Colp	71f70f5a07	Merge "apps/app_voicemail.c and main/say.c: Add support for Icelandic language"	10 years ago
Joshua Colp	643dd462ee	Merge "ari/resource_channels: Add 'formats' to channel create/originate"	10 years ago
Joshua Colp	31a5c28339	res_odbc: Implement a connection pool. ... Testing has shown that our usage of UnixODBC is problematic due to bugs within UnixODBC itself as well as the heavy weight cost of connecting and disconnecting database connections, even when pooling is enabled. For users of UnixODBC 2.3.1 and earlier crashes would occur due to insufficient protection of the disconnect operation. This was fixed in UnixODBC 2.3.2 and above. For users of UnixODBC 2.3.3 and higher a slow-down would occur under heavy database use due to repeated connection establishment. A regression is present where on each connection the database configuration is cached again, with the cache growing out of control. The connection pool implementation present in this change helps to mitigate these issues by reducing how much we connect and disconnect database connections. We also solve the issue of crashes under UnixODBC 2.3.1 by defaulting the maximum number of connections to 1, returning us to the previous working behavior. For users who may have a fixed version the maximum concurrent connection limit can be increased helping with performance. The connection pool works by keeping a list of active connections. If the connection limit has not been reached a new connection is established. If the connection limit has been reached then the request waits until a connection becomes available before continuing. ASTERISK-26074 #close ASTERISK-26054 #close Change-Id: I6774bf4bac49a0b30242c76a09c403d2e856ecff	10 years ago
Örn Arnarson	60caebc738	apps/app_voicemail.c and main/say.c: Add support for Icelandic language ... Icelandic has some weird grammar rules when dealing with dates and numbers. There are different genders used depending on which number you're dealing with, and only a handful of numbers do change depending on the gender. There is also an implied gender in several cases. This patch was originally written for asterisk 1.6, and has been in use for several years without crashes. I cleaned it up a bit and rewrote what was necessary for Asterisk 13. The functions were copied from other similar languages and modified where appropriate. If i recall correctly, the German and Danish functions were used as a base. ASTERISK-26087 Reported by: Örn Arnarson Tested by: Örn Arnarson Change-Id: Ib7d8bd7b0fede5767921ed821315b5b508c0e665	10 years ago
Richard Mudgett	dca052e531	chan_rtp.c: Simplify options to UnicastRTP channel creation. ... Change the awkward and not as flexible UnicastRTP options format From: Dial(UnicastRTP/127.0.0.1[/[<engine>][/[<codec>]]]) To: Dial(UnicastRTP/127.0.0.1[/[<options>]]) Where <options> can be standard Asterisk flag options: c(<codec>) - Specify which codec/format to use such as 'ulaw'. e(<engine>) - Specify which RTP engine to use such as 'asterisk'. More option flags can be easily added later such as the codec's RTP payload type to use when the codec does not have a static payload type defined. Change-Id: I0c297aaf09e2ee515536cb7437bb8042ff8ff3c9	10 years ago
Alexei Gradinari	3e8d523d88	core/dial: New channel variable FORWARDERNAME ... Added a new channel variable FORWARDERNAME which indicates which channel was responsible for a forwarding requests received on dial attempt. Fixed a bug in the app_queue: FORWARD_CONTEXT is not used. ASTERISK-26059 #close Change-Id: I34e93e8c1b5e17776a77b319703c48c8ca48e7b2	10 years ago
George Joseph	a2f820e8dc	ari/resource_channels: Add 'formats' to channel create/originate ... If you create a local channel and don't specify an originator channel to take capabilities from, we automatically add all audio formats to the new channel's capabilities. When we try to make the channel compatible with another, the "best format" functions pick the best format available, which in this case will be slin192. While this is great for preserving quality, it's the worst for performance and overkill for the vast majority of applications. In the absense of any other information, adding all formats is the correct thing to do and it's not always possible to supply an originator so a new parameter 'formats' has been added to the channel create/originate functions. It's just a comma separated list of formats to make availalble for the channel. Example: "ulaw,slin,slin16". 'formats' and 'originator' are mutually exclusive. To facilitate determination of format names, the format name has been added to "core show codecs". ASTERISK-26070 #close Change-Id: I091b23ecd41c1b4128d85028209772ee139f604b	10 years ago
Joshua Colp	608e0267e8	Merge "Expand the scope of Dial Events"	10 years ago
Joshua Colp	ad31e5bb1c	Merge "followme: allow disabling callee prompt"	10 years ago
Mark Michelson	205a31f86c	Expand the scope of Dial Events ... Dial events up to this point have come in two flavors * A Dial event with no status to indicate that dialing has begun * A Dial event with a status to indicate that dialing has ended With this change, Dial events have been expanded to also give intermediate events, such as "RINGING", "PROCEEDING", and "PROGRESS". This is especially useful for ARI dialing, as it gives the application writer the opportunity to place a channel into an early bridge when early media is detected. AMI handles these in-progress dial events by sending a new event called "DialState" that simply indicates that dial state has changed but has not ended. ARI never distinguished between DialBegin and DialEnd, so no change was made to the event itself. Another change here relates to dial forwards. A forward-related event was previously only sent when a channel was successfully able to forward a call to a new channel. With this set of changes, if forwarding is blocked, we send a Dial event with a forwarding destination but no forwarding channel, since we were prevented from creating one. This is again useful for ARI since application writers can now handle call forward attempts from within their own application. ASTERISK-25925 #close Reported by Mark Michelson Change-Id: I42cbec7730d84640a434d143a0d172a740995543	10 years ago
Alexei Gradinari	31f17abe44	res_pjsip: add "via_addr", "via_port", "call_id" to contact ... As res_pjsip_nat rewrites contact's address, only the last Via header can contain the source address of registered endpoint. Also Call-Id header may contain the source address of registered endpoint. Added "via_addr", "via_port", "call_id" to contact. Added new fields ViaAddress, CallID to AMI event ContactStatus. ASTERISK-26011 Change-Id: I36bcc0bf422b3e0623680152d80486aeafe4c576	10 years ago
Tzafrir Cohen	1d60bfcdf1	followme: allow disabling callee prompt ... Add the option 'enable_callee_prompt' to followme.conf. Enabled by default. If disabled, a callee is not prompted to accept or reject the forwarded call. ASTERISK-26064 #close Change-Id: I0a8b19d4cf95c86a07c992813babb9e4a4acfff5 Signed-off-by: Tzafrir Cohen <tzafrir.cohen@xorcom.com>	10 years ago
Joshua Colp	56f24345f7	Merge "func_odbc: single database connection should be optional"	10 years ago