12 Commits (7a4691b4250efa1220cecb3e220324ed09d8f915)

Author	SHA1	Message	Date
Joshua Colp	cc40bf5317	res_pjsip: Enable PJSIP DNS client support. ... This change enables DNS client support within PJSIP. System nameservers are automatically discovered using res_init or res_ninit. If this fails then PJSIP will resort to using gethostbyname for resolution. By enabling this support we gain SRV support, failover, and weight support. (closes issue ASTERISK-23435) Reported by: Matt Jordan Review: https://reviewboard.asterisk.org/r/3343/ ........ Merged revisions 410795 from http://svn.asterisk.org/svn/asterisk/branches/12 git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@410796 65c4cc65-6c06-0410-ace0-fbb531ad65f3	12 years ago
George Joseph	a94c8562fd	sorcery: Create sorcery instance registry. ... In order to retrieve an arbitrary sorcery instance from a dialplan function (or any place else) there needs to be a registry of sorcery instances. ast_sorcery_init now creates a hashtab as a registry. ast_sorcery_open now checks the hashtab for an existing sorcery instance matching the caller's module name. If it finds one, it bumps the refcount and returns it. If not, it creates a new sorcery instance, adds it to the hashtab, then returns it. ast_sorcery_retrieve_by_module_name is a new function that does a hashtab lookup by module name. It can be called by the future dialplan function. res_pjsip/config_system needed a small change to share the main res_pjsip sorcery instance. tests/test_sorcery was updated to include a test for the registry. (closes issue ASTERISK-22537) Review: http://reviewboard.asterisk.org/r/3184/ ........ Merged revisions 408518 from http://svn.asterisk.org/svn/asterisk/branches/12 git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@408519 65c4cc65-6c06-0410-ace0-fbb531ad65f3	12 years ago
Richard Mudgett	b5ca213e34	res_pjsip: Updates and adds more PJSIP CLI commands. ... * Adds identify, transport, and registration support to the PJSIP CLI. * Creates three additional callbacks, one for an iterator, one for a comparator, and one for a container. This eliminates the link dependency from higher level modules to lower level ones. * Eliminates duplicate sorting in PJSIP CLI commands. * Cleans up PJSIP CLI output formatting. * Pushes CLI command registration down to the implementing source file. * Adds several ast_sip_destroy_sorcery functions to complement existing ast_sip_sorcery_initialize functions. The destroy functions unregister PJSIP CLI commands and PJSIP CLI formatters. Reported by: George Joseph Review: https://reviewboard.asterisk.org/r/3104/ ........ Merged revisions 407568 from http://svn.asterisk.org/svn/asterisk/branches/12 git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@407573 65c4cc65-6c06-0410-ace0-fbb531ad65f3	12 years ago
Kevin Harwell	01a537d515	res_pjsip,compat: INFINITY and NAN undefined ... On some systems the values for INFINITY and NAN are not defined thus causing a build error on those systems. Added definitions for those if they had not previously been defined. (closes issue ASTERISK-23056) Reported by: capouch Patches: inf-nan-patch.txt uploaded by capouch (license 6564) ........ Merged revisions 406788 from http://svn.asterisk.org/svn/asterisk/branches/12 git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@406789 65c4cc65-6c06-0410-ace0-fbb531ad65f3	12 years ago
Matthew Jordan	b172d369c4	res_pjsip: Add PJSIP CLI commands ... Implements the following cli commands: pjsip list aors pjsip list auths pjsip list channels pjsip list contacts pjsip list endpoints pjsip show aor(s) pjsip show auth(s) pjsip show channels pjsip show endpoint(s) Also... Minor modifications made to the AMI command implementations to facilitate reuse. New function ast_variable_list_sort added to config.c and config.h to implement variable list sorting. (issue ASTERISK-22610) patches: pjsip_cli_v2.patch uploaded by george.joseph (License 6322) ........ Merged revisions 404480 from http://svn.asterisk.org/svn/asterisk/branches/12 git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@404507 65c4cc65-6c06-0410-ace0-fbb531ad65f3	12 years ago
Kevin Harwell	c602b086ed	res_pjsip_messaging: send message to a default outbound endpoint ... In some cases messages need to be sent to a direct URI (sip:<ip address>). This patch adds in that support by using a default outbound endpoint. When sending messages, if no endpoint can be found then the default one is used. To facilitate this a new default_outbound_endpoint option was added to the globals section for pjsip.conf. Review: https://reviewboard.asterisk.org/r/2944/ ........ Merged revisions 403680 from http://svn.asterisk.org/svn/asterisk/branches/12 git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@403687 65c4cc65-6c06-0410-ace0-fbb531ad65f3	12 years ago
Kevin Harwell	05cbf8df9b	res_pjsip: AMI commands and events. ... Created the following AMI commands and corresponding events for res_pjsip: PJSIPShowEndpoints - Provides a listing of all pjsip endpoints and a few select attributes on each. Events: EndpointList - for each endpoint a few attributes. EndpointlistComplete - after all endpoints have been listed. PJSIPShowEndpoint - Provides a detail list of attributes for a specified endpoint. Events: EndpointDetail - attributes on an endpoint. AorDetail - raised for each AOR on an endpoint. AuthDetail - raised for each associated inbound and outbound auth TransportDetail - transport attributes. IdentifyDetail - attributes for the identify object associated with the endpoint. EndpointDetailComplete - last event raised after all detail events. PJSIPShowRegistrationsInbound - Provides a detail listing of all inbound registrations. Events: InboundRegistrationDetail - inbound registration attributes for each registration. InboundRegistrationDetailComplete - raised after all detail records have been listed. PJSIPShowRegistrationsOutbound - Provides a detail listing of all outbound registrations. Events: OutboundRegistrationDetail - outbound registration attributes for each registration. OutboundRegistrationDetailComplete - raised after all detail records have been listed. PJSIPShowSubscriptionsInbound - A detail listing of all inbound subscriptions and their attributes. Events: SubscriptionDetail - on each subscription detailed attributes SubscriptionDetailComplete - raised after all detail records have been listed. PJSIPShowSubscriptionsOutbound - A detail listing of all outboundbound subscriptions and their attributes. Events: SubscriptionDetail - on each subscription detailed attributes SubscriptionDetailComplete - raised after all detail records have been listed. (issue ASTERISK-22609) Reported by: Matt Jordan Review: https://reviewboard.asterisk.org/r/2959/ ........ Merged revisions 403131 from http://svn.asterisk.org/svn/asterisk/branches/12 git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@403133 65c4cc65-6c06-0410-ace0-fbb531ad65f3	12 years ago
David M. Lee	2de42c2a25	Multiple revisions 399887,400138,400178,400180-400181 ... ........ r399887 | dlee | 2013-09-26 10:41:47 -0500 (Thu, 26 Sep 2013) | 1 line Minor performance bump by not allocate manager variable struct if we don't need it ........ r400138 | dlee | 2013-09-30 10:24:00 -0500 (Mon, 30 Sep 2013) | 23 lines Stasis performance improvements This patch addresses several performance problems that were found in the initial performance testing of Asterisk 12. The Stasis dispatch object was allocated as an AO2 object, even though it has a very confined lifecycle. This was replaced with a straight ast_malloc(). The Stasis message router was spending an inordinate amount of time searching hash tables. In this case, most of our routers had 6 or fewer routes in them to begin with. This was replaced with an array that's searched linearly for the route. We more heavily rely on AO2 objects in Asterisk 12, and the memset() in ao2_ref() actually became noticeable on the profile. This was #ifdef'ed to only run when AO2_DEBUG was enabled. After being misled by an erroneous comment in taskprocessor.c during profiling, the wrong comment was removed. Review: https://reviewboard.asterisk.org/r/2873/ ........ r400178 | dlee | 2013-09-30 13:26:27 -0500 (Mon, 30 Sep 2013) | 24 lines Taskprocessor optimization; switch Stasis to use taskprocessors This patch optimizes taskprocessor to use a semaphore for signaling, which the OS can do a better job at managing contention and waiting that we can with a mutex and condition. The taskprocessor execution was also slightly optimized to reduce the number of locks taken. The only observable difference in the taskprocessor implementation is that when the final reference to the taskprocessor goes away, it will execute all tasks to completion instead of discarding the unexecuted tasks. For systems where unnamed semaphores are not supported, a really simple semaphore implementation is provided. (Which gives identical performance as the original taskprocessor implementation). The way we ended up implementing Stasis caused the threadpool to be a burden instead of a boost to performance. This was switched to just use taskprocessors directly for subscriptions. Review: https://reviewboard.asterisk.org/r/2881/ ........ r400180 | dlee | 2013-09-30 13:39:34 -0500 (Mon, 30 Sep 2013) | 28 lines Optimize how Stasis forwards are dispatched This patch optimizes how forwards are dispatched in Stasis. Originally, forwards were dispatched as subscriptions that are invoked on the publishing thread. This did not account for the vast number of forwards we would end up having in the system, and the amount of work it would take to walk though the forward subscriptions. This patch modifies Stasis so that rather than walking the tree of forwards on every dispatch, when forwards and subscriptions are changed, the subscriber list for every topic in the tree is changed. This has a couple of benefits. First, this reduces the workload of dispatching messages. It also reduces contention when dispatching to different topics that happen to forward to the same aggregation topic (as happens with all of the channel, bridge and endpoint topics). Since forwards are no longer subscriptions, the bulk of this patch is simply changing stasis_subscription objects to stasis_forward objects (which, admittedly, I should have done in the first place.) Since this required me to yet again put in a growing array, I finally abstracted that out into a set of ast_vector macros in asterisk/vector.h. Review: https://reviewboard.asterisk.org/r/2883/ ........ r400181 | dlee | 2013-09-30 13:48:57 -0500 (Mon, 30 Sep 2013) | 28 lines Remove dispatch object allocation from Stasis publishing While looking for areas for performance improvement, I realized that an unused feature in Stasis was negatively impacting performance. When a message is sent to a subscriber, a dispatch object is allocated for the dispatch, containing the topic the message was published to, the subscriber the message is being sent to, and the message itself. The topic is actually unused by any subscriber in Asterisk today. And the subscriber is associated with the taskprocessor the message is being dispatched to. First, this patch removes the unused topic parameter from Stasis subscription callbacks. Second, this patch introduces the concept of taskprocessor local data, data that may be set on a taskprocessor and provided along with the data pointer when a task is pushed using the ast_taskprocessor_push_local() call. This allows the task to have both data specific to that taskprocessor, in addition to data specific to that invocation. With those two changes, the dispatch object can be removed completely, and the message is simply refcounted and sent directly to the taskprocessor. Review: https://reviewboard.asterisk.org/r/2884/ ........ Merged revisions 399887,400138,400178,400180-400181 from http://svn.asterisk.org/svn/asterisk/branches/12 git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@400186 65c4cc65-6c06-0410-ace0-fbb531ad65f3	12 years ago
Kinsey Moore	dfa5be76d4	Expose res_pjsip threadpool options ... Expose initial size, automatic increment, maximum size, and idle timeout as configurable parameters for the res_pjsip thread pool. Review: https://reviewboard.asterisk.org/r/2704/ (closes issue ASTERISK-22143) git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@396321 65c4cc65-6c06-0410-ace0-fbb531ad65f3	12 years ago
Kinsey Moore	41cd06e03f	Add CLI/AMI commands to force chan_pjsip actions ... For chan_pjsip, this introduces CLI/AMI remote unregistration commands, reworks CLI syntax for sending NOTIFYs, adds AMI qualification support, and adds documentation for PJSIPNotify. This also fixes two refcounting bugs in the outbound registration code. Review: https://reviewboard.asterisk.org/r/2695/ (closes issue ASTERISK-21939) git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@396087 65c4cc65-6c06-0410-ace0-fbb531ad65f3	12 years ago
Kinsey Moore	f6c7e6355e	Fix remnants of the pjsip renaming ... git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@395851 65c4cc65-6c06-0410-ace0-fbb531ad65f3	12 years ago
Mark Michelson	735b30ad71	The large GULP->PJSIP renaming effort. ... The general gist is to have a clear boundary between old SIP stuff and new SIP stuff by having the word "SIP" for old stuff and "PJSIP" for new stuff. Here's a brief rundown of the changes: * The word "Gulp" in dialstrings, functions, and CLI commands is now "PJSIP" * chan_gulp.c is now chan_pjsip.c * Function names in chan_gulp.c that were "gulp_*" are now "chan_pjsip_*" * All files that were "res_sip*" are now "res_pjsip*" * The "res_sip" directory is now "res_pjsip" * Files in the "res_pjsip" directory that began with "sip_*" are now "pjsip_*" * The configuration file is now "pjsip.conf" instead of "res_sip.conf" * The module info for all PJSIP-related files now uses "PJSIP" instead of "SIP" * CLI and AMI commands created by Asterisk's PJSIP modules now have "pjsip" as the starting word instead of "sip" git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@395764 65c4cc65-6c06-0410-ace0-fbb531ad65f3	12 years ago