Fix data-type mismatch between app_voicemail and database columns
exposed by new version of MariaDB
ASTERISK-27760
Change-Id: I8543ad480a08c98be78bde1ee870e6e6c84b2c5b
Correct the log warning message shown when ODBC voicemail
retrieve_file is called and there is a null value in the category
column.
A more meaningfull message is now written at debug level.
ASTERISK-27853
Change-Id: Ic36e97d5eb070a23a12ba45972f6b53e2182a3f4
This fixes build warnings found by GCC 8. In some cases format
truncation is intentional so the warning is just suppressed.
ASTERISK-27824 #close
Change-Id: I724f146cbddba8b86619d4c4a9931ee877995c84
Use AST_PBX_MAX_STACK to escape if we recurse 128 times. This will
prevent crash if dialplan contains an include loop. Log an error when
this occurs, at most one message per call to Macro() so we avoid logger
spam.
ASTERISK-26570 #close
Change-Id: I6c71b76998c31434391b150de055ae9a531e31da
Fixes a bug on the "confbridge show profile bridge" cli command
that showed "video_mode=no video" when video_mode was set
to "sfu"
ASTERISK-27418 #close
Change-Id: I481e3172c7f872664c7ac7809879d541c9f031e9
This change adds the ability for multiple REMB reports in
bridge_softmix to be combined according to a configured
behavior into a single report. This single report is sent
back to the sender of video, which adjusts the encoding bitrate
to be at or below the bitrate of the report. The available
behaviors are: lowest, highest, and average. Lowest uses the
lowest received bitrate. Highest uses the highest received
bitrate. Average goes through the received bitrates adding
them to the previous average and creates a new average.
Other behaviors can be added in the future and the existing
average one may be adjusted, but this provides the foundation
to do so.
Support for configuring which behavior to use has been
added to app_confbridge.
ASTERISK-27804
Change-Id: I9eafe4e7c1f72d67074a8d6acb26bfcf19322b66
SendText now accepts new channel variables that can be used
to override the To and From display names and set the Content-Type
of a message. Since you can now set Content-Type, other text/*
content types are now valid.
Change-Id: I648b4574478119f95de09d9f08e9595831b02830
This change adds a configuration option to app_confbridge which can be
used to set the interval at which we will send a combined REMB (remote
estimated maximum bitrate) frame to sources of video. The bridging API
has also been extended slightly to allow setting this so bridge_softmix
can use it.
ASTERISK-27786
Change-Id: I0e49eae60f369c86434414f3cb8278709c793c82
Add an option to make app_originate not wait for the created channel
to answer.
Change-Id: I7fc2facd77079abc6321f44e8bcd4e39298de2ae
Requested-by: Frederic Steinfels <fst@highdefinition.ch>
Signed-off-by: Russell Bryant <russell@russellbryant.net>
Asterisk does not need the development package of libltdl, because it does not
use any symbol of -lltdl directly. Instead, it uses the runtime package via the
shared library -lodbc. On the supported platforms, that shared library declares
its dependency on -lltdl correctly, otherwise AST_EXT_LIB_CHECK would have
failed.
ASTERISK-27745
Change-Id: Icd315809b8e7978203431f3afb66240dd3a040ba
Certain applications (e.g. door-phone) require that also video is transmitted
before a call is accepted.
Change-Id: I9842e1dc2f6e1c2c49dc33fe615255007d2f821e
When app_voicemail calls ast_test_suite_notify with the results of
a user keypress, it formats the keypress as '%c'. If the user hung up
or some other error occurrs, the result of the keypress is a non
printable character. This ultimately causes json_vpack_ex to think
it's being passed a non utf-8 string and return an error.
* Keypress results passed to ast_test_suite_notify are now checked with
isprint() and a '?' is substituted if the check fails.
Change-Id: I78ee188916bbac840f3d03f40201b692347ea865
* acl (named_acl.c)
* cdr
* cel
* ccss
* dnsmgr
* dsp
* enum
* extconfig (config.c)
* features
* http
* indications
* logger
* manager
* plc
* sounds
* udptl
These modules are now loaded at appropriate time by the module loader.
Unlike loadable modules these use AST_MODULE_LOAD_FAILURE on error so
the module loader will abort startup on failure of these modules.
Some of these modules are still initialized or shutdown from outside the
module loader. logger.c is initialized very early and shutdown very
late, manager.c is initialized by the module loader but is shutdown by
the Asterisk core (too much uses it without holding references).
Change-Id: I371a9a45064f20026c492623ea8062d02a1ab97f
The menuselect comment was updated to deprecate these modules but the
AST_MODULE_INFO block at the end of file was missed.
ASTERISK-27671
Change-Id: I63070b5c4d4f08af010c6034acd4793c1bcef839
Checking option_debug directly is incorrect as it ignores file/module
specific debug settings. This system-wide change replaces nearly all
direct checks for option_debug with the DEBUG_ATLEAST macro.
Change-Id: Ic342d4799a945dbc40ac085ac142681094a4ebf0
astosp.h is leftover from when logic was split between app_osplookup and
res_osp. All logic was moved into app_osplookup by 109737eb1c in 2006,
but astosp.h remained. This moves the remaining defines into
app_osplookup and deletes astosp.h.
Change-Id: I0a6c4debd7c9543b608520b1765abfa4fab7b2fd
Between Asterisk 11 and Asterisk 13 there was a significant increase
in the number of AST_FRAME_NULL frames being processed by app_amd.c's
main loop. Each AST_FRAME_NULL frame was being counted as 100ms
towards the total time and silence. This may have been accurate
when app_amd.c was orginally added, but it is not in Asterisk 13.
As such the total analysis time and silence calculations were way
off effectively breaking app_amd.c
* Additional debug messages were added
* AST_FRAME_NULL are now ignored
ASTERISK-27610
Change-Id: I18aca01af98f87c1e168e6ae0d85c136d1df5ea9
* app_fax (replaced by res_fax).
* res_config_sqlite (replaced by res_config_sqlite3).
* res_monitor (replaced by app_mixmonitor).
This is related to ASTERISK~23657 but does not resolve that ticket.
Resolving that ticket would require complete removal of res_monitor.
ASTERISK-27671 #close
Change-Id: I16a3edd61fc1abd4a7b2e9357693ed663f62dd49
* Made the AMI ConfbridgeList action's ConfbridgeList events output all
the standard channel snapshot headers instead of a few hand-coded channel
snapshot headers. The benefit is that the CallerIDName gets disruptive
characters like CR, LF, Tab, and a few others escaped. However, an empty
CallerIDName is now output as "<unknown>" instead of "<no name>".
ASTERISK-27651
Change-Id: Iaf7d54a9d40194c2db060bc9b4979fab6720d977
The dsp_talking_threshold does not represent time in milliseconds. It
represents the average magnitude per sample in the audio packets. This is
what the DSP uses to determine if a packet is silence or talking/noise.
Change-Id: If6f939c100eb92a5ac6c21236559018eeaf58443
This removes references that are no longer needed due to automatic
references created by module dependencies.
In addition this removes most calls to ast_module_check as they were
checking modules which are listed as dependencies.
Change-Id: I332a6e8383d4c72c8e89d988a184ab8320c4872e
I've audited all modules that include any header which includes
asterisk/optional_api.h. All modules which use OPTIONAL_API now declare
those dependencies in AST_MODULE_INFO using requires or optional_modules
as appropriate.
In addition ARI dependency declarations have been reworked. Instead of
declaring additional required modules in res/ari/resource_*.c we now add
them to an optional array "requiresModules" in api-docs for each module.
This allows the AST_MODULE_INFO dependencies to include those missing
modules.
Change-Id: Ia0c70571f5566784f63605e78e1ceccb4f79c606
This patch adds the ability to configure a prompt which will be read
to the "winner" who pressed 1 (or the configured value) and received
the call.
ASTERISK-24372 #close
Change-Id: I6ec1c6c883347f7d1e1f597189544993c8d65272
* Declare 'requires' and 'enhances' text fields on module info structure.
* Rename 'nonoptreq' to 'optional_modules'.
* Update doxygen comments.
Still need to investigate dependencies among modules I cannot compile.
Change-Id: I3ad9547a0a6442409ff4e352a6d897bef2cc04bf
The check for last_user == NULL needs to happen before we dereference
the variable, previously it was possible for us to check flags of a NULL
last_user.
Change-Id: I274f737aa8af9d2d53e4a78cdd7ad57561003945
Fix instances of:
* Retreive
* Recieve
* other then
* different then
* Repeated words ("the the", "an an", "and and", etc).
* othterwise, teh
ASTERISK-24198 #close
Change-Id: I3809a9c113b92fd9d0d9f9bac98e9c66dc8b2d31
* mwi_sub_event_cb: mwist leaked on separate_mailbox failure.
* add_email_attachment: A reference to sox_gain_tmpdir was used
after the storage was out of scope.
Change-Id: I6282c542ff7b82fa091177a912d11234a8b00a30
This patch adds the ability to set the wrapuptime on the queue member
config.
When the option is set the wrapuptime on the queue member is used instead
of the queue's wrapuptime.
ASTERISK-27483 #close
Change-Id: I11c85809537f974eb44dc5bbf82bcedd8a458902
The Local channel has never supported app_transfer
from what I can see so remove it from the documentation.
ASTERISK-25649
Change-Id: Icbcfe297f6f866285a26b3e9fd5c6d00fa22e0e9
Remove nearly all use of regex from ACO users. Still remaining:
* app_confbridge has a legitamate use of option name regex.
* ast_sorcery_object_fields_register is implemented with regex, all
callers use simple prefix based regex. I haven't decided the best
way to fix this in both 13/15 and master.
Change-Id: Ib5ed478218d8a661ace4d2eaaea98b59a897974b
Currently, to figure out specified voicemail's status, there's only one
way to do it, which is use a VoicemailUserEntry AMI message.
But it consumed it too much resource(it check everything).
So, added new AMI action.
ASTERISK-27470
Change-Id: Ie4eba1424a142e5fbd1d9fb1821a3fc1a1e238b7
The approach with having a single global subscription to all extension
state changes has one issue: dynamically created hints don't have any
watchers and are therefore garbage collected on the first dialplan
reload.
This change creates a state subscription for every queue member with a
hint as state_interface, thus increasing the count of watches for
hints, so they are not destroyed prematurely anymore.
There are 2 side effects:
1. The state change callback in app_queue is not executed when
there are no members referring to the extension.
2. The callback is called multiple times for the same hint if it's
associated with more than one queue member.
Reported by: Steven T. Wheeler
ASTERISK-18411 #close
Change-Id: I4956af2136ea2a7f110ac9272eae5f6e676d8f89
There are many places in the code base where we ignore the return value
of fcntl() when getting/setting file descriptior flags. This patch
introduces a convenience function that allows setting or clearing file
descriptor flags and will also log an error on failure for later
analysis.
Change-Id: I8b81901e1b1bd537ca632567cdb408931c6eded7
Currently, when the app_voicemail sending VoicemailUserEntry AMI event, there's
no OldMessageCount info for default.
To check the OldMessageCount info, it required IMAP_STORAGE define, but this is
not correct.
Added OldMessageCount item as a default.
ASTERISK-27456
Change-Id: I5c71521c2d1daf8b7b161e31c34d28cca6aea4c7
Instead of specifying AST_MODFLAG_LOAD_ORDER with load_pri
AST_MODPRI_DEFAULT just use AST_MODFLAG_DEFAULT.
Change-Id: I0123258eafce324249433a69df15a85cc16e509f
Declare 'res' initialized to -1 to deal with earlier error paths that
could cause 'res' to be returned uninitialized.
Change-Id: I8ac2a5755bf4174d89ef893e924c940f702b104e
We've been calling pbx_builtin_setvar_helper to set the
RECORD_STATUS variable before actually closing the recorded file.
If a client is watching VarSet events and tries to do something with
the file when a RECORD_STATUS event is seen, they might attempt to
do so while the file it's still open.
We now delay calling pbx_builtin_setvar_helper until after we close
the file.
ASTERISK-27423
Change-Id: I7fe9de99953e46b4bafa2b38cf151fe8f6488254
When (v)asprintf() fails, the state of the allocated buffer is undefined.
The library had better not leave an allocated buffer as a result or no one
will know to free it. The most likely way it can return failure is for an
allocation failure. If the printf conversion fails then you actually have
a threading problem which is much worse because another thread modified
the parameter values.
* Made __ast_asprintf()/__ast_vasprintf() set the returned buffer to NULL
on failure. That is much more useful than either an uninitialized pointer
or a pointer that has already been freed. Many uses won't have to check
for failure to ensure that the buffer won't be double freed or prevent an
attempt to free an uninitialized pointer.
* stasis.c: Fixed memory leak in multi_object_blob_to_ami() allocated by
ast_asprintf().
* ari/resource_bridges.c:ari_bridges_play_helper(): Remove assignment to
the wrong thing which is now not needed even if assigning to the right
thing.
Change-Id: Ib5252fb8850ecf0f78ed0ee2ca0796bda7e91c23
* Stop using ast_module_helper to check if a module is loaded, use
ast_module_check instead (app_confbridge and app_meetme).
* Stop ast_module_helper from listing reload classes when needsreload
was not requested.
ASTERISK-27378
Change-Id: Iaed8c1e4fcbeb242921dbac7929a0fe75ff4b239
Fix typo, that specify usage wrong option 'dtmf-features' for CHANNEL() function
instead of correct 'dtmf_features'
ASTERISK-27377 #close
Change-Id: I15ecc829c1035b359584673e12cdb5c9291ac930
* Mark the module deprecated.
* Disable the module by default.
* Produce a warning the first time a macro is used.
* Note deprecation related options in app_dial and app_queue.
ASTERISK-27350
Change-Id: I560ea043bacdbc5534a17d97854273d52c2f1bdc
We were ignoring the return value from ast_pbx_outgoing_exten() and
ast_pbx_outgoing_app() which could fail before setting the reason code.
This resulted in failures being reported as success.
ASTERISK-25266 #close
Reported by: Allen Ford
Change-Id: Idf16237b7e41b527d2c69c865829128686beeb3b
The previous patch for ASTERISK-27216 made it so you wouldn't get any
position or periodic announcements unless you had announce-to-first-user
enabled. The announce-to-first-user feature was added by ASTERISK_21782
as a result of the patch which introduced the redundant announcements that
ASTERISK-27216 removes.
* By noting that the makeannouncement variable is used to suppresses the
first user announcement, we set its initial value to the
announce-to-first-user enable setting.
ASTERISK-27216
Change-Id: Ieaeb7dbea8ae7073086b775fbafe0625b000b10a
This patch reverts the change by patch 2263 from old reviewboard.
Note that reverting that 2263-patch still preserves the behaviour that
the commit log of the 2263-patch claimed to add. The reason for this is:
The function wait_for_answer is only called from try_calling which
in turn is only called from the main for loop in queue_exec, and
earlier in that loop we already check the things that's removed by
this patch. There's no need to check those things twice each loop
iteration, and I think the proper place to check it is before each
ringing cycle. By checking it in wait_for_answer, you allow the issue
explained in the jira - that the head caller hears announcements while
the agents' sip phones are actively ringing.
Reported-by: Stefan Engström
Tested-by: Stefan Engström
ASTERISK-27216 #close
Change-Id: Ic4290dc75256f9743900c6762ee1bb915f672db0
Discovered while experimenting with Cyber Mega Phone 2K Ultimate Dynamic
Edition after accepting the audio request but declining the video one.
Change-Id: Iaa86d41fccfbc1b559a30ccf740d78a3b5f8a98c
This change makes it so that the conference recorder channel
that is created only contains audio formats and an audio stream.
This is because the underlying application used by ConfBridge to
record, MixMonitor, only allows recording audio.
Having additional streams (and in particular a video stream) can
result in clients needlessly renegotiating to add a video stream
that will never receive video.
Change-Id: I89d38aedc9205eca7741d5435e73e73bb9de97a0
* WaitForSilence completes successfully if it receives no media in the
specified timeout, but when acting as WaitForNoise that logic needs
to be reversed.
* Use standard argument parsing macros and add some error checking for
invalid values.
* The documentation indicated that the first argument to both
WaitForSilence and WaitForNoise was required when it was not. Update
the documentation to reflect that.
* Wrap up some behavior in structs to avoid boolean checks all over the
place.
ASTERISK-24066 #close
Reported by: M vd S
Change-Id: I01d40adc5b63342bb5018a1bea2081a0aa191ef9
An admin can configure app_minivm with an externnotify program to be run
when a voicemail is received. The app_minivm application MinivmNotify
uses ast_safe_system() for this purpose which is vulnerable to command
injection since the Caller-ID name and number values given to externnotify
can come from an external untrusted source.
* Add ast_safe_execvp() function. This gives modules the ability to run
external commands with greater safety compared to ast_safe_system().
Specifically when some parameters are filled by untrusted sources the new
function does not allow malicious input to break argument encoding. This
may be of particular concern where CALLERID(name) or CALLERID(num) may be
used as a parameter to a script run by ast_safe_system() which could
potentially allow arbitrary command execution.
* Changed app_minivm.c:run_externnotify() to use the new ast_safe_execvp()
instead of ast_safe_system() to avoid command injection.
* Document code injection potential from untrusted data sources for other
shell commands that are under user control.
ASTERISK-27103
Change-Id: I7552472247a84cde24e1358aaf64af160107aef1
This prevents orphaned CBAnn channels from getting stuck in the bridge.
ASTERISK-26994 #close
Reported by: James Terhune
Change-Id: I5e43e832a9507ec3f2c59752cd900b41dab80457
mkstemp() returns a unique filename, but appending an extension to that
filename does not guarantee uniqueness. Instead, use mkdtemp() and we
can put whatever extension we want on the files that we create inside
the directory.
In the case of app_minivm, we also now properly clean up any temporary
files that we create.
ASTERISK-20858 #close
Reported by: Walter Doekes
Change-Id: I30ad04f0e115f0b11693ff678ba5184d8b938e43
If the Record() application is called with a relative filename that
includes directories, we were not properly creating the intermediate
directories and Record() would fail.
Secondarily, updated the documentation for RECORDED_FILE to mention
that it does not include a filename extension.
Finally, rewrote the '%d' functionality to be a bit more straight
forward and less noisy.
ASTERISK-16777 #close
Reported by: klaus3000
Change-Id: Ibc2640cba3a8c7f17d97b02f76b7608b1e7ffde2
Fixed to use correct initial value and fixed to use the
correct queue info to check the first value.
ASTERISK-27204
Change-Id: Ia9e36c828e566e1cc25c66f73307566e4acb8e73
GCC 7 has added capability to produce warnings, this fixes most of those
warnings. The specific warnings are disabled in a few places:
* app_voicemail.c: truncation of paths more than 4096 chars in many places.
* chan_mgcp.c: callid truncated to 80 chars.
* cdr.c: two userfields are combined to cdr copy, fix would break ABI.
* tcptls.c: ignore use of deprecated method SSLv3_client_method().
ASTERISK-27156 #close
Change-Id: I65f280e7d3cfad279d16f41823a4d6fddcbc4c88
Setting this option will cause the Queue application to only announce
the caller's position if it has improved since the last time that we
announced it.
Change-Id: I173a124121422209485b043e2bf784f54242fce6
The following testsuite voicemail tests were failing to re-enter the
mailbox after the first login attempt.
tests/apps/voicemail/authenticate_invalid_mailbox
tests/apps/voicemail/authenticate_invalid_password
The tests were noting the start of the vm-incorrect-mailbox prompt and
immediately sending the mailbox for the next login attempt. Since the
invalid message playback had to complete before the digits were
recognized, the test passed for the wrong reason and added approximately
20 seconds to the test times.
* Allow the vm-incorrect-mailbox prompt to get interrupted by the mailbox
digits like the initial vm-login prompt so the tests are able to enter the
intended mailbox.
Change-Id: I1dc53fe917bfe03a4587b2c4cd24c94696a69df8
This change does a few things to improve packet loss and renegotiation:
1. On outgoing RTP streams we will now properly reflect out of order
packets and packet loss in the sequence number. This allows the
remote jitterbuffer to better reorder things.
2. Video updates can now be discarded for a period of time
after one has been sent to prevent flooding of clients.
3. For declined and removed streams we will now release any
media session resources associated with them. This was not
previously done and caused an issue where old state was being
used for a new stream.
4. RTP bundling was not actually removing bundled RTP instances
from the parent. This has been resolved by removing based on
the RTP instance itself and not the SSRC.
5. The code did not properly handle explicitly unbundling an
RTP instance from its parent. This now works as expected.
ASTERISK-27143
Change-Id: Ibd91362f0e4990b6129638e712bc8adf0899fd45
This commit fixes two possible scenarios:
* When recording name and if during recording you hangup, file is never
removed. This is due to the fact file location is nulled.
* When recording name and if you hangup during thank-you prompt, file
is never removed.
ASTERISK-27123 #close
Change-Id: I39b7271408b4b54ce880c5111a886aa8f28c2625
In say_date_generic the timezonename parameter is passed but never
used. Fix it by passing it to the ast_localtime function.
ASTERISK-27124
Change-Id: I63106b8db10426d417d7275f22554a616e92fae4
When performing the "Queues" action via AMI, it outputs the same
text that the Asterisk CLI outputs when running a "queue show"
command, which does not conform with the AMI spec. "QueueStatus"
already does what the "Queues" action should do, so instead of
correcting the output, the "Queues" action will be removed and
"QueueStatus" should be used instead.
ASTERISK-27073 #close
Reported by: Brian
Change-Id: Id11743859758255b69cc3a557750d7a56c6d16f8
This API was not actively maintained, was not added to new modules
(such as res_pjsip), and there exist better alternatives to acquire the
same information, such as the ARI.
Change-Id: I4b2185a83aeb74798b4ad43ff8f89f971096aa83
The primary focus of this patch is adding a missing call to
ast_odbc_release_obj(), but is also a general cleanup of the ODBC
related code in app_voicemail.
ASTERISK-27093 #close
Change-Id: I8e285142eaeb3146b4287a928276b70db76c902b
Fixed the following bugs:
* calls to stream_echo_write had the last two parameters swapped
* ast_read should have been ast_read_stream
* added a null check on the frame's subclass format
This also resets the update_sent flag upon receiving SRRCHANGE control frame.
This will then force a video update.
ASTERISK-26997
Change-Id: I6ad7c8253559b800800433c52339e7f5aa583566
The fix for ASTERISK-25665 introduced a regression.
The return value of queue_exec used to be 0 in case of leavewhenempty
but it was changed to -1 (returned from wait_our_turn and passed
transparently by queue_exec), thus leading to hangup instead of returning
back to dialplan.
This commit resets the value back to 0 in this case, restoring
original behavior.
ASTERISK-27065 #close
Reported by: Marek Cervenka
Change-Id: Id9c83b75aeda463250155e88c5004be52bbca5ac
A new global option "imap_poll_logout" was added to specify whether need to
disconnect from the IMAP server after polling of mailboxes.
ASTERISK-27068 #close
Closing IMAP connection after loading mailbox from voicemail.conf
ASTERISK-24052 #close
Change-Id: Ib7558ba04516240a32b65f42e9be64372a0ae12a
A previous commit added plumbing to bridge_softmix to allow for an SFU
experience with Asterisk. This commit adds an option to app_confbridge
that allows for a confbridge to actually make use of the SFU video mode.
SFU mode is implemented in a "set it and forget it" kind of way. That
is, when the bridge is created, if SFU mode is enabled, then the video
mode gets set to SFU and cannot be changed. Future improvements may
allow for a hybrid experience (e.g. forward multiple video streams,
specifically those of the most recent talkers), but for this addition,
no such capability is present.
Change-Id: I87bbcb63dec6dbbb42488f894871b86f112b2020
This sets up the "plumbing" in bridge_softmix to
be able to accommodate Asterisk asking as an SFU
(selective forwarding unit) for conferences.
The way this works is that whenever a channel enters or leaves a
conference, all participants in the bridge get sent a stream topology
change request. The topologies consist of the channels' original
topology, along with video destination streams corresponding to each
participants' source video streams. So for instance, if Alice, Bob, and
Carol are in the conference, and each supplies one video stream, then
the topologies for each would look like so:
Alice:
Audio,
Source video(Alice),
Destination Video(Bob),
Destination video (Carol)
Bob:
Audio,
Source video(Bob)
Destination Video(Alice),
Destination video (Carol)
Carol:
Audio,
Source video(Carol)
Destination Video(Alice),
Destination video (Bob)
This way, video that arrives from a source video stream can then be
copied out to the destination video streams on the other participants'
channels.
Once the bridge gets told that a topology on a channel has changed, the
bridge constructs a map in order to get the video frames routed to the
proper destination streams. This is done using the bridge channel's
stream_map.
This change is bare-bones with regards to SFU support. Some key features
are missing at this point:
* Stream limits. This commit makes no effort to limit the number of
streams on a specific channel. This means that if there were 50 video
callers in a conference, bridge_softmix will happily send out topology
change requests to every channel in the bridge, requesting 50+
streams.
* Configuration. The plumbing has been added to bridge_softmix, but
there has been nothing added as of yet to app_confbridge to enable SFU
video mode.
* Testing. Some functions included here have unit tests.
However, the functionality as a whole has only been verified by
hand-tracing the code.
* Selectivenss. For a "selective" forwarding unit, this does not
currently have any means of being selective.
* Features. Presumably, someone might wish to only receive video from
specific sources. There are no external-facing functions at the moment
that allow for users to select who they receive video from.
* Efficiency. The current scheme treats all video streams as being
unidirectional. We could be re-using a source video stream as a
desetnation, too. But to simplify things on this first round, I did it
this way.
Change-Id: I7c44a829cc63acf8b596a337b2dc3c13898a6c4d
A change was done which added an 'in_call' flag to queue
members that was set to true while talking to an agent.
Unfortunately in practice this does not accurately reflect
whether they are talking to an agent or not. If a Local
channel is involved and a transfer is performed then the
app_queue application would incorrectly think the agent
was still in a call with the caller. This was done to
fix a race condition between an agent becoming available
by device state and the checking of the last call information
for the wrapup time. There was a small window where the
last call information would be the previous value instead
of the new one.
This change goes about fixing the original issue in a
different way by considering the call completed if device
state is received which would make the agent available
and if they are currently in a call. If this occurs the
last call information is updated before the agent becomes
available ensuring that old information is not present
when checking if the member should be called. This also
improves the transfer situation by actually updating
and enforcing the wrapup time.
ASTERISK-26399
ASTERISK-26400
ASTERISK-26715
ASTERISK-26975
Change-Id: Ife1cb686e3173b3a6d368601adef9aff69d4beea
When user leaves a conference, its channel calls async_play_sound_file()
in order to play the name announcement and then unlinks the sound file.
The async_play_sound_file() function adds a task to conference playback queue,
which then runs playback_common() function in a different thread.
It leads to a race condition when, in some cases, channel thread may unlink
the sound file before playback_common() had a chance to open it.
This patch creates a file deletion task, that is queued after playback.
ASTERISK-27012 #close
Change-Id: I412f7922d412004b80917d4e892546c15bd70dd3
Additional variable to work alongside QUEUE_MAX_PENALTY and QUEUE_MIN_PENALTY,
including an extra parameter in queuerules.conf. This value causes lower
Agent penalty values to "raise up" so that they can join higher penalty agents
and be treated equally after a period of time.
ASTERISK-26995 #close
Change-Id: If1c6421a983667a5ac4c359f6dac25b212b4c459
If the channel does not have multi-stream support then this application acts
just like app_echo. If it does have multi-stream support then each stream is
echoed back to itself (one-to-one).
If a "num" is specified, then a new topology is made that contains clones (from
the channel's topology) of all media types that are not equal to the given
"type". If the media type differs then the first stream matching the "type" is
cloned into the new topology and then up to "num" - 1 of the same stream are
also cloned into it. Any additional streams from the original topology matching
the "type" are subsequently ignored (i.e. not added to the new topology).
For this same case when a frame is read from a stream that frame is still
echoed back like before, but now that frame is also echoed out to the
additional streams that matched on the specified "type".
ASTERISK-26997 #close
Change-Id: I254144486734178e196c7f590a26ffc13543ff2c
When manipulating flags on a channel the channel has to be
locked to guarantee that nothing else is also manipulating
the flags. This change introduces locking where necessary to
guarantee this. It also adds helper functions that manipulate
channel flags and lock to reduce repeated code.
ASTERISK-26789
Change-Id: I489280662dba0f4c50981bfc5b5a7073fef2db10
There are 2 places in app_queue.c that log EXITEMPTY event: one in
wait_our_turn, and another one in queue_exec in the loop trying to
call an agent after wait_our_turn.
In most cases it leads to logging EXITEMPTY twice.
ABANDON is also logged on two places, and in the rare case when an agent
and caller hang up simultaneously it's also possible to get duplicates
in queue_log.
This commit changes wait_our_turn to return -1 ("the caller should exit
the queue") instead of 0 ("the caller's turn has arrived") in case of
leaving when empty, so queue_exec skips the agent calling loop.
Also, leave_queue is now executed only once in this case, because 2nd
time is just a noop when the queue entry has already been removed.
Also, it sets qe->handled to -1 to indicate that the call was not
answered by an agent, but the necessary handling has already been done
in order to avoid logging an extra ABANDON entry.
ASTERISK-25665 #close
Reported by: Ove Aursand
Change-Id: I4578dd383bf2ac41589cf167865e8aaebcd4c11e
menu_template_handler wasn't properly accounting for the fact that
it might be called both during a load/reload (which isn't really
valid but not prevented) and by a dialplan function. In both cases
it was attempting to use the "pending" config which wasn't valid in
the latter case. aco_process_config is also partly to blame because
it wasn't properly cleaning "pending" up when a reload was done and
no changes were made. Both of these contributed to a crash if
CONFBRIDGE(menu,template) was called in a dialplan after a reload.
* aco_process_config now sets info->internal->pending to NULL
after it unrefs it although this isn't strictly necessary in the
context of this fix.
* menu_template_handler now uses the "current" config and silently
ignores any attempt to be called as a result of someone uses the
"template" parameter in the conf file.
Luckily there's no other place in the codebase where
aco_pending_config is used outside of aco_process_config.
ASTERISK-25506 #close
Reported-by: Frederic LE FOLL
Change-Id: Ib349a17d3d088f092480b19addd7122fcaac21a7
This change extends the ast_request functionality by adding another
function and callback to create an outgoing channel with a requested
stream topology. Fallback is provided by either converting the
requested stream topology into a format capabilities structure if
the channel driver does not support streams or by converting the
requested format capabilities into a stream topology if the channel
driver does support streams.
The Dial application has also been updated to request an outgoing
channel with the stream topology of the calling channel.
ASTERISK-26959
Change-Id: Ifa9037a672ac21d42dd7125aa09816dc879a70e6
Cleaned up some of the incorrect uses of fread() and fwrite(), mostly in
the format modules. Neither of these functions will ever return a value
less than 0, which we were checking for in some cases.
I've introduced a fair amount of duplication in the format modules, but
I plan to change how format modules work internally in a subsequent
patch set, so this is simply a stop-gap.
Change-Id: I8ca1cd47c20b2c0b72088bd13b9046f6977aa872
In all non-pbx modules, AST_MODULE_LOAD_FAILURE has been changed
to AST_MODULE_LOAD_DECLINE. This prevents asterisk from exiting
if a module can't be loaded. If the user wishes to retain the
FAILURE behavior for a specific module, they can use the "require"
or "preload-require" keyword in modules.conf.
A new API was added to logger: ast_is_logger_initialized(). This
allows asterisk.c/check_init() to print to the error log once the
logger subsystem is ready instead of just to stdout. If something
does fail before the logger is initialized, we now print to stderr
instead of stdout.
Change-Id: I5f4b50623d9b5a6cb7c5624a8c5c1274c13b2b25
We needed the reason for our reporting when agents pause/unpause all of
their queues at once. This is a small, simple patch that adds a reason
for PAUSEALL and UNPAUSEALL. I have been using it in production for years.
ASTERISK-26920 #close
Change-Id: Ifb3f0d1a0abd5194253d9794023546e1395baf3d
This change removes the old epoll support which has not been used or
maintained in quite some time.
The fixed number of file descriptors on a channel has also been removed.
File descriptors are now contained in a growable vector. This can be
used like before by specifying a specific position to store a file
descriptor at or using a new API call, ast_channel_fd_add, which adds
a file descriptor to the channel and returns its position.
Tests have been added which cover the growing behavior of the vector
and the new API call.
ASTERISK-26885
Change-Id: I1a754b506c009b83dfdeeb08c2d2815db30ef928
Queue member will get stuck in pending_members if queue calls a device
that is different from the one observed for state changes.
This patch removes members from pending_members as a result of channel stasis
events such as blind or attended transfers and hangup.
ASTERISK-26862 #close
Change-Id: I8bf6df487b9bb35726c08049ff25cdad5e357727
The queue_stasis_data structure contains various mutable fields that require
appropriate locking. Specifically, the 'dying,' 'member_uniqueid,' and
'caller_uniqueid' fields need to be locked when read from or written to.
Change-Id: I246b7dbff8447acc957a1299f6ad0ebd0fd39088
Dereferencing struct ast_autochan.chan without first calling
ast_autochan_channel_lock() is unsafe because the pointer could change at
any time due to a masquerade. Unfortunately, ast_autochan_channel_lock()
itself uses struct ast_autochan.chan unsafely and can result in a deadlock
if the original channel happens to get destroyed after a masquerade in
addition to the pointer getting changed.
The problem is more likely to happen with v11 and earlier because
masquerades are used to optimize out local channels on those versions.
However, it could still happen on newer versions if the channel is
executing a dialplan application when the channel is transferred or
redirected. In this situation a masquerade still must be used.
* Added a lock to struct ast_autochan to safely be able to use
ast_autochan.chan while trying to get the channel lock in
ast_autochan_channel_lock(). The locking order is the channel lock then
the autochan lock. Locking in the other direction requires deadlock
avoidance.
* Fix unsafe ast_autochan.chan usages in app_mixmonitor.c.
* Fix unsafe ast_autochan.chan usages in app_chanspy.c.
* app_chanspy.c: Removed unused autochan parameter from next_channel().
ASTERISK-26867
Change-Id: Id29dd22bc0f369b44e23ca423d2f3657187cc592
A caller can leave the Queue() application after being bridged with a
member in a few ways:
* Caller or member hangup
* Caller is transferred somewhere else (blind or atx)
* Caller is externally redirected elsewhere
The first 2 scenarios are currently handled by subscribing to stasis
messages, but the 3rd is not explicitly covered. If a caller is
redirected away from the Queue() application, the member who was last
bridged with that caller will remain in an "In use" state until the
caller hangs up.
This patch adds handling of the caller leaving the queue via
redirection. We monitor the caller-member bridge, and if the caller is
the one that leaves, we treat it the same as we would a caller hangup.
ASTERISK-26400 #close
Reported by: Etienne Lessard
Change-Id: Iba160907770de5a6c9efeffc9df5a13e9ea75334
* apps/app_voicemail.c fromstring field added to mailbox which will
override the global fromstring if set.
ASTERISK-24562 #close
Change-Id: I5e90e3a1ec2b2d5340b49a0db825e4bbb158b2fe
Adds binaural synthesis to bridge_softmix (via convolution using libfftw3).
Binaural synthesis is conducted at 48kHz.
For a conference, only one spatial representation is rendered.
The default rendering is applied for mono-capable channels.
ASTERISK-26292
Change-Id: Iecdb381b6adc17c961049658678f6219adae1ddf
ast_load_realtime_multientry() returns an ast_config structure whose
ast_categorys are keyed with the empty strings. Several modules were
giving semantic meaning to the category names causing problems at
runtime.
* app_directory: Treated the category name as the mailbox name, and
would fail to direct calls to the appropriate extension after an
entry was chosen.
* app_queue: Queues, queue members, and queue rules were all affected
and needed to be updated.
* pbx_realtime: Pattern matching would never succeed because the
extension entered by the user was always compared to the empty
string.
Change-Id: Ie7e44986344b0b76ea8f6ddb5879f5040c6ca8a7
vm_authenticate doesn't always set the passed ast_vm_user argument, so
we initialize to 0 before passing it in.
ASTERISK-25893 #close
Reported by: Filip Jenicek
Change-Id: Ia3cc0128f93d352ed9add8d5c2f0f7232c2cbe4a
Original patch by John Covert, slight modifications by me.
ASTERISK-17428 #close
Reported by: John Covert
Patches:
app_voicemail.c.patch (license #5512) patch uploaded by
John Covert
Change-Id: Ic3361b0782e5a5397a19ab18eb8550923a9bd6a6
When attempting to use VoiceMailPlayMsg with a realtime data backend
the message is located, but never retrieved. This patch adds the
required RETRIEVE and DISPOSE calls that will fetch the message from
the database (and IMAP storage as well for that matter).
Also, removed extraneous make_file call.
ASTERISK-26723 #close
Change-Id: I1e122dd53c0f3d7faa10f3c2b7e7e76a47d51b8c
When using Record() with the silence detection feature, the stream is
written out to the given file. However, if only 'silence' is detected,
this file is then truncated to the first second of the recording.
This patch adds the 'u' option to Record() to override that behavior.
ASTERISK-18286 #close
Reported by: var
Patches:
app_record-1.8.7.1.diff (license #6184) patch uploaded by var
Change-Id: Ia1cd163483235efe2db05e52f39054288553b957
* app_minivm: Use built-in completion facilities to complete optional
arguments.
* app_voicemail: Use built-in completion facilities to complete
optional arguments.
* app_confbridge: Add missing colons after 'Usage' text.
* chan_alsa: Use built-in completion facilities to complete optional
arguments.
* chan_sip: Use built-in completion facilities to complete optional
arguments. Add completions for 'load' for 'sip show user', 'sip show
peer', and 'sip qualify peer.'
* chan_skinny: Correct and extend completions for 'skinny reset' and
'skinny show line.'
* func_odbc: Correct completions for 'odbc read' and 'odbc write'
* main/astmm: Use built-in completion facilities to complete arguments
for 'memory' commands.
* main/bridge: Correct completions for 'bridge kick.'
* main/ccss: Use built-in completion facilities to complete arguments
for 'cc cancel' command.
* main/cli: Add 'all' completion for 'channel request hangup.' Correct
completions for 'core set debug channel.' Correct completions for 'core
show calls.'
* main/pbx_app: Remove redundant completions for 'core show
applications.'
* main/pbx_hangup_handler: Remove unused completions for 'core show
hanguphandlers all.'
* res_sorcery_memory_cache: Add completion for 'reload' argument of
'sorcery memory cache stale' and properly implement.
Change-Id: Iee58c7392f6fec34ad9d596109117af87697bbca
In Asterisk 11, if the 'Originate' AMI command failed to connect the provided
Channel while in extension mode, a 'failed' extension would be looked up and
run. This was, I believe, unintentionally removed in 51b6c49. This patch
restores that behavior.
This also adds an enum for the various 'synchronous' modes in an attempt to
make them meaningful.
ASTERISK-26115 #close
Reported by: Nasir Iqbal
Change-Id: I8afbd06725e99610e02adb529137d4800c05345d
We shouldn't unlock the channel after starting a snapshot staging because
another thread may interfere and do its own snapshot staging.
* app_dial.c:dial_exec_full() made hold the channel lock while setting up
the outgoing channel staging. Made hold the channel lock after the called
party answers while updating the caller channel staging.
* chan_sip.c:sip_new() completed the channel staging on off-nominal exit.
Also we need to use ast_hangup() instead of ast_channel_unref() at that
location.
* channel.c:__ast_channel_alloc_ap() added a comment about not needing to
complete the channel snapshot staging on off-nominal exit paths.
* rtp_engine.c:ast_rtp_instance_set_stats_vars() made hold the channel
locks while staging the channels for the stats channel variables.
Change-Id: Iefb6336893163f6447bad65568722ad5d5d8212a
With 500+ queues and a reload every minute, a random queue disappears
upon reload. The cause is mususe of the 'dead' flag. Namely, all queues
were marked dead up front, and then "resurrected" by dropping this flag
for those found in the configuration. But a queue marked dead can be
removed also when control leaves the app entry point on a PBX thread.
With this change, the queue is marked only not found, and at the end of
reload only the queues that are still not found are actually marked as
dead, so the dead flag is never reset, and set only on positively dead
queues.
ASTERISK-26755
Change-Id: I3a4537aec9eb8d8aeeaa0193407e3523feb004bf
Some (voicemail-related) tests API symlinks beep.gsm and other files
from ast_config_AST_VAR_DIR. It should use ast_config_AST_DATA_DIR.
ASTERISK-26740 #close
Change-Id: Id49c56fb9e16df64b1a2b829693ca7601252df89
QueueLog did not log ringnoanswer when the caller abandoned call
before first timeout. It was impossible to get agent membername
and ringing duration for this short calls. After some discusions
it seems that the best way is to add new event RINGCANCELED,
which is generated after caller hangup during ringing.
ASTERISK-26665
Change-Id: Ic70f7b0f32fc95c9378e5bcf63865519014805d3
In some cases member is added to pending_members, and the channel
is hung up before any extension state change. So the member would
stay in pending_members forever. So when we call do_hang, we
should also remove member from pending.
ASTERISK-26621 #close
Change-Id: Iae476b5c06481db18ebe0fa594b3e80fdc9a7d54
Issue/patch ASTERISK-26587 was inspired by issue ASTERISK-22992
that requested ability to add callerid into app_originate.
Comments in that issue suggested that it was better solved by
adding an option to gosub prior to originating the call. The
attached patch implements this much like app_dial with two
options one to gosub on the originating channel and one to gosub
on the newly created channel and behaves just like app_dial.
I have tested this patch by adding callerid info to the new
channel and also SIPAddHeader (to e.g. add header to force auto
answer) and confirmed it works. Have also tested both 'exten'
and 'app' versions of app_originate.
Opened by: dkerr
Patch by: dkerr
Change-Id: I36abc39b58567ffcab4a636ea196ef48be234c57
fopencookie/funclose is a non-standard API and should not be used
in portable software. Additionally, the way FILE's fd is used in
non-blocking mode is undefined behaviour and cannot be relied on.
This introduces internal abstraction for io streams, that allows
implementing the desired virtualization of read/write operations
with necessary timeout handling.
ASTERISK-24515 #close
ASTERISK-24517 #close
Change-Id: Id916aef418b665ced6a7489aef74908b6e376e85
In 9785e8d0, app_echo was updated to relay video source updates to the
channel for the purposes of displaying video in WebRTC tests.
Unfortunately, this can cause a Kafkaesque nightmare if two or more
Local channels are in a bridge together where their ends are in
app_echo. When this situation occurs, a video update sent into app_echo
will cause the video update to be relayed to the other Local channels,
causing another round of video updates, etc. In not much time at all,
the channel length queues will be overwhelmed, channel alert pipes will
fail, and all hell will break loose as Asterisk merrily continues to
throw more video update requests onto the channels.
This patch updates app_echo to *only* relay a single video update. Once
a video update has been made, all further video updates are dropped.
This meets the intended purpose of the original patch: if we get a video
update and we're in app_echo, go ahead and ask the sender to update
themselves. However, once we've got that video stream sync'd up, don't
keep spamming the world.
Change-Id: I9210780b08d4c17ddb38599d1c64453adfc34f74
Given the scenario where multiple channels are dialed using Dial()
but the caller is picked up using PickupChan() all outgoing channels
except the channel specified to PickupChan() would be marked
as ringing until the call had been hung up.
When using the PickupChan application the channel executing the
application is swapped into place of another channel. As part
of this process the channel is answered. The Dial application
has explicit logic which checks if the channel is answered,
cancels all other outgoing channels, and bridges. This logic is
different than the normal logic that is executed when an outgoing
channel is answered. This different logic failed to publish dial
events stating that the other outgoing channels had been canceled.
As a result references to the outgoing channels were held onto by
the dial masquerade process until the call had been ended and
the channels had gone away. This would result in the channels
appearing in the "core show channels" list despite not being present
anymore and would also result in incorrect device state.
This change makes it so that this logic also publishes
dial events stating that the other outgoing channels have been
canceled.
ASTERISK-26549
Change-Id: Iea7168e6e82f7d4609ec0366153804e4f55ea64f
ASTERISK_REGISTER_FILE no longer has any purpose so this commit removes
all traces of it.
Previously exported symbols removed:
* __ast_register_file
* __ast_unregister_file
* ast_complete_source_filename
This also removes the mtx_prof static variable that was declared when
MTX_PROFILE was enabled. This variable was only used in lock.c so it
is now initialized in that file only.
ASTERISK-26480 #close
Change-Id: I1074af07d71f9e159c48ef36631aa432c86f9966
Joshua Colp
Rodrigo Ramírez Norambuena
Nic Colledge
Corey Farrell
George Joseph
Chris-Savinovich
Richard Mudgett
Russell Bryant
Jenkins2
Alexander Traud
Florian Floimair
Kevin Harwell
Sungtae Kim
Michael Cargile
ghjm
Sean Bright
Ivan Poddubny
Igor Goncharovskiy
Nathan Bruning
StefanEng86
Sergej Kasumovic
Holger Hans Peter Freyther
Benjamin Keith Ford
Niklas Larsson
Alexei Gradinari
Mark Michelson
Robert Mordec
Steve Davies
Troy Bowman
zuul
Daniel Journo
frahaase
rrittgarn
Sebastian Gutierrez
kkm
Tzafrir Cohen
Martin Tomec
Martin Tomec
David Kerr
Timo Teräs
Matt Jordan