Dialplan has to be careful about passing an empty destination list or
empty positions in the list. As a result, dialplan has to check for
these conditions before using Page. Simplify dialplan by making Page
handle these conditions gracefully.
* Made tolerate empty positions in the paged device list.
* Reduced some warnings associated with the 's' option to verbose
messages. The warning level for those messages really serves no purpose
as that is why the 's' option exists.
ASTERISK-28638
Change-Id: I95b64a6d6800cd1a25279c88889314ae60fc21e3
Temporary channel lifespan is very short and CDR deactivation request
through ast_cdr_set_property() may happen when CDR is not available
yet. Use CDR_PROP() dialplan function instead, it will first wait
for pending CDR insertion requests to be processed.
ASTERISK-28636
Change-Id: I1cbe09e8d2169c0962c1195133ff260d291f2074
ConfBridge has the ability to move between different sample
rates for mixing the conference bridge. Up until now there has
only been the ability to set the conference bridge to mix at
a specific sample rate, or to let it move between sample rates
as necessary. This change adds the ability to configure a
conference bridge with a maximum sample rate so it can move
between sample rates but only up to the configured maximum.
ASTERISK-28658
Change-Id: Idff80896ccfb8a58a816e4ce9ac4ebde785963ee
ASTERISK_28143 attempted to fix an issue where calls with no audio would never
timeout. It did so by adding AST_FRAME_NULL as a frame type to process in its
calculations. Unfortunately these frames seem to show up at irregular time
intervals. This resulted in app_amd returning prematurely most of the time.
* Removed AST_FRAME_NULL from the calculations
* Added a check to see how much time has actually passed since app_amd began
ASTERISK-28608
Change-Id: I642a21b02d389b17e40ccd5357754b034c3daa42
This patch fixes several issues reported by the lgtm code analysis tool:
https://lgtm.com/projects/g/asterisk/asterisk
Not all reported issues were addressed in this patch. This patch mostly fixes
confirmed reported errors, potential problematic code points, and a few other
"low hanging" warnings or recommendations found in core supported modules.
These include, but are not limited to the following:
* innapropriate stack allocation in loops
* buffer overflows
* variable declaration "hiding" another variable declaration
* comparisons results that are always the same
* ambiguously signed bit-field members
* missing header guards
Change-Id: Id4a881686605d26c94ab5409bc70fcc21efacc25
The following modules needed tweaks for API changes.
addons/cdr_mysql.c
addons/chan_ooh323.c
apps/app_meetme.c
ASTERISK-28604
Change-Id: Ib40e513ae55b5114be035cdc929abb6a8ce2d06d
If you specify multiple formats in voicemail.conf, eg. "format = gsm|wav"
and are using realtime ODBC backend, only the first format gets stored
in the database. So when you forward a message later on, there is a bug
generating the email, related to the stored format (GSM) being different
than the desired email format (WAV) specified for the user. Sox can
handle this, but Asterisk needs to tell sox exactly what to do.
ASTERISK-22192
Change-Id: I7321e7f7e7c58adbf41dd4fd7191c887b9b2eafd
This reverts commit fd2e8d0da7.
Reason for revert: Problematic for users who store their voicemail
on network storage devices, or share voicemail storage between
multiple Asterisk instances.
ASTERISK-28567 #close
Change-Id: I3ff4ca983d8e753fe2971f3439bd154705693c41
ChanIsAvail() creates a temporary channel with ast_request() to test
resource availability. It should not generate a CDR when it hangs up
this temporary channel.
This patch disables CDR generation for the temporary channel with
ast_cdr_set_property().
ASTERISK-28527
Change-Id: I7b0555c6909c7d322e452dde97c9ea5b111552d1
There are 4 scenarios to consider when capturing audio from a channel
with an audiohook:
1. There is no rx and no tx audio, so return nothing.
2. There is rx but no tx audio, so return rx.
3. There is tx but no rx audio, so return tx.
4. There is rx and tx audio, so mix them and return.
The file passed as the primary argument to MixMonitor will be written to
in scenarios 2, 3, and 4. However, if you pass the r() and t() options
to MixMonitor, a frame will only be written to the r() file if there was
rx audio and a frame will only be written to the t() file if there was
tx audio.
If you subsequently take the r() and t() files and try to mix them, the
sides of the conversation will 'drift' and be non-representative of the
user experience.
This patch adds a new 'S' option to MixMonitor that injects a frame of
silence on either the r() side or the t() side of the channel so that
when later mixed, there is no such drift.
Change-Id: Ibf5ed73a811087727bd561a89a59f4447b4ee20e
The function leave_voicemail checks if expungeonhangup is set,
but does not check if IMAP stream is closed,
so it could call imap function with NULL stream.
This leads to segfault.
ASTERISK-28505 #close
Change-Id: Ib66c57c1f1ba97774e447b36349198e2626a8d7c
You now select voicemail backends like normal dialplan applications, so
there is no longer a need for their own menuselect category.
Reported by snuff-work in #asterisk-dev
Change-Id: Idfa4c9c8349726074318a9e6b68d24c374521005
There were still a few places in the code that could overflow when "packing"
a json object with a value outside the base type integer's range. For instance:
unsigned int value = INT_MAX + 1
ast_json_pack("{s: i}", value);
would result in a negative number being "packed". In those situations this patch
alters those values to a ast_json_int_t, which widens the value up to a long or
long long.
ASTERISK-28480
Change-Id: Ied530780d83e6f1772adba0e28d8938ef30c49a1
app_voicemail utilized the stasis cache when polling mailboxes for MWI. This
caused a memory leak (items were not being appropriately removed from the
cache), and subsequent slowdown in system processing. This patch removes the
stasis cache dependency, thus alleviating the memory leak. It does this by
utilizing the new MWI API that better manages state lifetime.
ASTERISK-28443
ASTERISK-27121
Change-Id: Ie89fedaca81ea1fd03d150d9d3a1ef3d53740e46
Changes made to apps/Makefile to optionally build all three app_voicemail
variations at the same time: 1) file (default), 2) odbc, and 3) imap.
This functionality was requested by users. modules.conf.sample warns the
user to make sure only one voicemail is loaded at a time.
Change-Id: Iba3cd8ffb4b7e8b1c64a11dd383e1eafcd3ed0e7
Now AMD algorithm will not ignore AST_FRAME_NULL, As I think using manual
wait time instead of `framelength` is enough to fix timeout / TOOLONG issue.
ASTERISK-28419 #close
Change-Id: I16ea2d6295bc99b975e8c092e5f9fbd9214debdb
When a channel already in a conference bridge is attended transfered
to another extension, or when an existing call is attended
transferred into a conference bridge, we now generate ConfbridgeJoin
and ConfbridgeLeave events for the entering and departing channels.
Change-Id: Id7709cfbceb26fbcb828b2d0d2a6b2fbeaf028e1
AttendedTransfer queues up attended transfer to the given extension.
This application can be useful with Custom Dynamic Features.
For example to make attended transfer to a predefined number.
features.conf
;;;
[applicationmap]
my_atxfer => *7,self,GoSub,"my_atxfer,s,1",default
;;;
extensions.conf
;;;
[globals]
DYNAMIC_FEATURES=my_atxfer
TRANSFER_CONTEXT=my_transfer
[my_atxfer]
exten => s,1,AttendedTransfer(1234567890)
same => n,Return()
[my_transfer]
include => default
;;;
This application also can be used to completly redefine Attended transfer
feature using dialplan. For example:
features.conf
;;;
[featuremap]
atxfer => *7
[applicationmap]
custom_atxfer => *2,self,GoSub,"custom_atxfer,s,1",default
;;;
extensions.conf
;;;
[globals]
DYNAMIC_FEATURES=custom_atxfer
TRANSFER_CONTEXT=my_transfer
[custom_atxfer]
exten => s,1,
same => n,Playback(pbx-transfer)
same => n,Read(dest,dial,10,i,3,3)
same => n,AttendedTransfer(${dest})
same => n,Return()
[my_transfer]
include => default
;;;
Change-Id: Ie5cfa455d0813cffd5c85a6fb117f07d8f0b903b
BlindTransfer redirects all channels currently bridged to the
caller channel to the specified destination.
This application can be useful with Custom Dynamic Features.
For example to make blind transfer to a predefined number.
features.conf
;;;
[applicationmap]
my_blindxfer => *6,self,GoSub,"my_blindxfer,s,1",default
;;;
extensions.conf
;;;
[globals]
DYNAMIC_FEATURES=my_blindxfer
[my_blindxfer]
exten => s,1,BlindTransfer(1234567890,default)
same => n,Return()
;;;
This application also can be used to completly redefine Blind transfer
feature using dialplan. For example:
features.conf
;;;
[featuremap]
blindxfer =>
[applicationmap]
custom_blindxfer => ##,self,GoSub,"custom_blindxfer,s,1",default
;;;
extensions.conf
;;;
[globals]
DYNAMIC_FEATURES=custom_blindxfer
[custom_blindxfer]
exten => s,1,
same => n,Playback(pbx-transfer)
same => n,Read(dest,dial,10,i,3,3)
same => n,BlindTransfer(${dest},default)
same => n,Return()
;;;
Change-Id: I9d55e7f69ccfd4472dec00d62771d6de8803215a
This patch adds the 'p' option.
The extension entered will be considered complete when a # is entered.
Change-Id: If77c40c9c8b525885730821e768f5dea71cf04c1
Various fixes for issues caught by gcc 9. Mostly snprintf
trying to copy to a buffer potentially too small.
ASTERISK-28412
Change-Id: I9e85a60f3c81d46df16cfdd1c329ce63432cf32e
When producing a combined REMB value the normal behavior
is to have a REMB value which is unique for each sender
based on all of their receivers. This can result in one
sender having low bitrate while all the rest are high.
This change adds "all" variants which produces a bridge
level REMB value instead. All REMB reports are combined
together into a single REMB value that is the same for
each sender.
ASTERISK-28401
Change-Id: I883e6cc26003b497c8180b346111c79a131ba88c
There a long history here:
In commit dd1e62c095 has introduce by default shared_lastcall = true by
default but this now only happen is there not [general] directive in
queues.conf
After that, the commit 4b50e3f1ee fix the
sample file.
We'll need to keep the same setting if there a general or not section in
configuration file since the shared_lastcall is by a long time in
sample files as default value to 'no'.
Change-Id: Id44faec370136df8d57902b453ad4059ed21b94c
Added RINGTIME, RINGTIME_MS, PROGRESSTIME, PROGRESSTIME_MS variables filled
at the earliest received PROGRESS or RINGING.
Added millisecond versions of DIALEDTIME and ANSWEREDTIME.
Added millisecond versions of ast_channel_get_up_time and
ast_channel_get_duration in channel.c.
ASTERISK-28363
Change-Id: If95f1a7d8c4acbac740037de0c6e3109ff6620b1
There is enough MWI functionality to warrant it having its own 'c' and header
files. This patch moves all current core MWI data structures, and functions
into the following files:
main/mwi.h
main/mwi.c
Note, code was simply moved, and not modified. However, this patch is also in
preparation for core MWI changes, and additions to come.
Change-Id: I9dde8bfae1e7ec254fa63166e090f77e4d3097e0
Because the per-mailbox options are the last thing on a line, don't look
for or stomp on any subsequent commas.
ASTERISK-27935 #close
Reported by: Sébastien Duthil
Change-Id: I07b2eb4a33c303d0c7114d5b906f8c067c60a153
If Asterisk crashes while a VM directory is locked, lock files in the VM
spool directory will not get properly cleaned up. We now clear them on
module load.
ASTERISK-20207 #close
Reported by: Steven Wheeler
Change-Id: If40ccd508e2f6e5ade94dde2f0bcef99056d0aaf
* Always set member->lastpause when setting member->paused
* Fixed typo (using member->lastcall instead of member->lastpause) in
'queue show' output.
* Use a constant 'now' in 'queue show' output for a better point-in-time
view of time based stats.
ASTERISK-27541 #close
Reported by: César Benjamín García Martínez
Change-Id: Ib41ced90cfdb66f9bb1e7b263d0f6fc1ac6e18fa
It was a copy/paste of the QUEUE_MEMBER_COUNT function's synopsis.
ASTERISK-20986 #close
Reported by: Olivier Krief
Change-Id: If51ec481feb35824a4e78ab5600b197b819b10be
Fixes an intermittent segmentation fault which occured when accessing
nativeformats of a channel which entered into a queue.
ASTERISK-27964
Reported by: Francisco Seratti
Change-Id: Ic87fa7a363f3b487c24ce07032f4b2201c22db9e
Topic names now follow: <subsystem>:<functionality>[/<object>]
This ensures that they are all unique, and also provides better
insight in to what each topic is for.
Subscriber ids now also use the main topic name they are
subscribed to and an incrementing integer as their identifier to
make it easier to understand what the subscription is primarily
responsible for.
Both the CLI commands for listing topic and subscription statistics
now sort to make it a bit easier to see what is going on.
Subscriptions will now show all topics that they are receiving messages
from, not just the main topic they were subscribed to.
ASTERISK-28335
Change-Id: I484e971a38c3640f2bd156282e532eed84bf220d
While the 'interface' column is a NOT NULL, the empty string is still
allowed. res_config_odbc treats the empty string as a NULL and we crash
when trying to dereference.
Also cleaned up an adjacent error message for consistency.
ASTERISK-28168 #close
Change-Id: I55e012b540fbcda99bb40bede3099b7ae5db8202
This change add ability to set the wrapuptime per-member using the
AddQueueMember application.
The feature to set wrapuptime per member was include in the issue
ASTERISK-27483 for static member by configuration file and was not
added to set from AddQueueMember.
ASTERISK-28055 #close
Change-Id: I7c7ee4a6f804922cd7c42cb02eea26eb3806c6cf
When Asterisk is connected and used with a database the response
time of the database can cause problems in Asterisk if it is long.
Normally the only way to see this problem would be to retrieve a
backtrace from Asterisk and examine where things are blocked, or
examine the database to see if there is any indication of a
problem.
This change adds some basic query logging to make it easier to
investigate such a problem. When logging is enabled res_odbc will
now keep track of the number of queries executed, as well as the
query that has taken the longest time to execute. There is also
an option which will cause a WARNING message to be output if a
query takes longer than a configurable amount of time to execute.
This makes it easier and clearer for users that their database may
be experiencing a problem that could impact Asterisk.
ASTERISK-28277
Change-Id: I173cf4928b10754478a6a8c27dfa96ede0f058a6
You can now define an "aliases" context in voicemail.conf
whose entries point to actual mailboxes. These can be used anywhere
the mailbox is specified.
Example:
[general]
aliasescontext = myaliases
[default]
1234 = yadayada
[myaliases]
4321@devices = 1234@default
Now you can use 4321@devices to refer to the 1234@default mailbox.
This can be useful to provide channel drivers with constant
mailbox specifications such as <extension>@devices leaving
app_voicemail to control exactly which mailbox the alias points to.
Now, only voicemail has to be reloaded to make changes instead of
individual channel drivers which are usually more expensive to
reload.
Change-Id: I395b9205c91523a334fe971be0d1de4522067b04
If a voicemail is marked "urgent" then the VM_MESSAGEFILE channel variable is
not updated correctly since urgent messages are in a different directory. The
fix is to update the channel variable when the path to the urgent message is
created.
ASTERISK-28225
Change-Id: I8efbace06e6122ea0793f7bdb073d4378e8274ca
When using the 'b' option to Queue with a queue that was not configured
for ring all a crash would occur as the wrong pointer would be used.
ASTERISK-28218
Change-Id: If1390f64e321047dff24fd2410c95dde74904980
The free_user function was automatically deleting the stasis mailbox
state but this only makes sense when the mailbox is actually
deleted, not just the structure freed. This was causing issues
where leave_voicemail would publish the mwi message to stasis and
delete the state before the message could be processed by
res_pjsip_mwi.
* Removed the delete of state from free_user().
* Created a new free_user_final() function that both frees the data
structure and deletes the state. This function is only called
during module load/unload where it's appropriate to delete the
state.
ASTERISK-28215
Change-Id: I305e8b3c930e9ac41d901e5dc8a58fd7904d98dd
Currently the file sound_only_person is not played when a marked
user (with announce_only_user=yes) joins an empty conference.
This patch fixes it.
ASTERISK-28201 #close
Change-Id: I85b67687e6b220939c3af8091d83a70a7b174cf4
This reverts commit 29115e2384.
That commit closed a long standing hole which allowed subscriptions
to mailboxes that weren't configured in voicemail.conf. This
caused an issue with FreePBX which depdended on that behavior.
The commit is being reverted until FreePBX can handle the new
behavior.
ASTERISK-28151
Reported by: Ronald Raikes
Change-Id: I57b7b85e75d7dd97c742b5c69d718a0f61260c15
* The bridging core no longer uses the stasis cache for bridge
snapshots. The latest bridge snapshot is now stored on the
ast_bridge structure itself.
* The following APIs are no longer available since the stasis cache
is no longer used:
ast_bridge_topic_cached()
ast_bridge_topic_all_cached()
* A topic pool is now used for individual bridge topics.
* The ast_bridge_cache() function was removed since there's no
longer a separate container of snapshots.
* A new function "ast_bridges()" was created to retrieve the
container of all bridges. Users formerly calling
ast_bridge_cache() can use the new function to iterate over
bridges and retrieve the latest snapshot directly from the
bridge.
* The ast_bridge_snapshot_get_latest() function was renamed to
ast_bridge_get_snapshot_by_uniqueid().
* A new function "ast_bridge_get_snapshot()" was created to retrieve
the bridge snapshot directly from the bridge structure.
* The ast_bridge_topic_all() function now returns a normal topic
not a cached one so you can't use stasis cache functions on it
either.
* The ast_bridge_snapshot_type() stasis message now has the
ast_bridge_snapshot_update structure as it's data. It contains
the last snapshot and the new one.
* cdr, cel, manager and ari have been updated to use the new
arrangement.
Change-Id: I7049b80efa88676ce5c4666f818fa18ad1985369
When a channel snapshot was created it used to be done
from scratch, copying all data (many strings). This incurs
a cost when doing so.
This change segments the channel snapshot into different
components which can be reused if unchanged from the
previous snapshot creation, reducing the cost. In normal
cases this results in some pointers being copied with
reference count being bumped, some integers being set,
and a string or two copied. The other benefit is that it
is now possible to determine if a channel snapshot update
is redundant and thus stop it before a message is published
to stasis.
The specific segments in the channel snapshot were split up
based on whether they are changed together, how often they
are changed, and their general grouping. In practice only
1 (or 0) of the segments actually get changed in normal
operation.
Invalidation is done by setting a flag on the channel when
the segment source is changed, forcing creation of a new
segment when the channel snapshot is created.
ASTERISK-28119
Change-Id: I5d7ef3df963a88ac47bc187d73c5225c315f8423
Channels no longer use the Stasis cache for channel snapshots. Instead
they are stored in a hash table in stasis_channels which reduces the
number of Stasis messages created and allows better storage.
As a result the following APIs are no longer available since the stasis
cache is no longer used:
ast_channel_topic_cached()
ast_channel_topic_all_cached()
The ast_channel_cache_all() and ast_channel_cache_by_name() functions
now return an ao2_container of ast_channel_snapshots rather than
a container of stasis_messages therefore you can't (and don't need
to) call stasis_cache functions on it.
The ast_channel_topic_all() function now returns a normal topic not
a cached one so you can't use stasis cache functions on it either.
The ast_channel_snapshot_type() stasis message now has the
ast_channel_snapshot_update structure as it's data. It contains the
last snapshot and the new one.
ast_channel_snapshot_get_latest() still returns the latest snapshot.
The latest snapshot is now stored on the channel itself to eliminate
cache hits when Stasis messages that have the snapshot as a payload
are created.
ASTERISK-28102
Change-Id: I9334febff60a82d7c39703e49059fa3a68825786
Replace usage of ao2_container_alloc with ao2_container_alloc_hash or
ao2_container_alloc_list. Remove ao2_container_alloc macro.
Change-Id: I0907d78bc66efc775672df37c8faad00f2f6c088
This replaces the inline functions with macros. This removes the need
to directly use __ao2_ref, opts instead for standard ao2_bump and
ao2_cleanup macros.
Change-Id: If4e04e9bab2e3c883188437cb9f487b3e498a21b
This change adds the ability for subscriptions to indicate
which message types they are interested in accepting. By
doing so the filtering is done before being dispatched
to the subscriber, reducing the amount of work that has
to be done.
This is optional and if a subscriber does not add
message types they wish to accept and set the subscription
to selective filtering the previous behavior is preserved
and they receive all messages.
There is also the ability to explicitly force the reception
of all messages for cases such as AMI or ARI where a large
number of messages are expected that are then generically
converted into a different format.
ASTERISK-28103
Change-Id: I99bee23895baa0a117985d51683f7963b77aa190
The 'I' option currently blocks initial CONNECTEDLINE or REDIRECTING updates
from the called parties to the caller.
This patch also blocks updates in the other direction before call is
answered.
ASTERISK-27980
Change-Id: I6ce9e151a2220ce9e95aa66666933cfb9e2a4a01
Adding the "label" attribute used for participant info correlation
was previously done in app_confbridge but it wasn't working
correctly because it didn't have knowledge about which video
streams belonged to which channel. Only bridge_softmix has that
data so now it's set when the bridge topology is changed.
ASTERISK-28107
Change-Id: Ieddeca5799d710cad083af3fcc3e677fa2a2a499
* Update the post-answer documentation and example. The Dial example was
incorrect and misleading for the post-answer subroutine useage.
* Fix note and warning paragraphs in option descriptions. They don't show
up in the wiki.
Change-Id: I81019a1fd75d5b9151f76b52c38e2a90da682d14
Add attribute_warn_unused_result to ast_taskprocessor_push,
ast_taskprocessor_push_local and ast_threadpool_push. This will help
ensure we perform the necessary cleanup upon failure.
Change-Id: I7e4079bd7b21cfe52fb431ea79e41314520c3f6d
Declining the queue_member_status_type stasis message in stasis.conf
causes these messages to leak json objects.
* Add missing ast_json_unref() if the type is NULL in
queue_publish_member_blob().
ASTERISK-28084
Change-Id: I691ecf49bd1f7d9c29182e1eee8c4bb7103be9fc
The first attempt at publishing confbridge events to participants
involved publishing them at the same time stasis events were
created. This caused issues with bridge and channel locks. The
second attempt involved publishing them when the stasis events
were received by the code that published the confbridge AMI events.
This caused timing issues because, depending on resources available,
the event could be received before channels actually joined the
bridge and would therefore fail to send messages to the participant.
This attempt reverts to the original mechanism with one exception.
The join and leave events are published via bridge join and leave
hooks. This guarantees the states of the channels and bridge and
provides deterministic timing for event publishing.
Change-Id: I2660074f8a30a5224cb953d5e047ee84484a9036
This issue related to setting of holdtime, announcements, member delays.
It works well if we set the member delays to "0" and no announcements
and no holdtime.This issue will happen if we set member delays to "1",
"2"... or announcements or holdtime and hangs up the call during
processing it.
And here is the reason:
(At the step of answering a phone.)
It takes care any holdtime, announcements, member delays,
or other options after a call has been answered if it exists.
Normally, After the call has been aswered,
and we wait for the processing one of the cases of the member delays
or hold time or announcements finished, "if (ast_check_hangup(peer))"
will be not executed, then queue will be updated at update_queue().
Here, pending member will be removed.
However, after the call has been aswered,
if we hangs up the call during one of the cases of the member delays
or hold time or announcements, "if (ast_check_hangup(peer))"
will be executed.
outgoing = NULL and at hangupcalls, pending members will not be removed.
* This fixed patch will remove the pending member from container
before hanging up the call with outgoing is NULL.
ASTERISK-27920
Reported by: Cao Minh Hiep
Tested by: Cao Minh Hiep
Change-Id: Ib780fbf48ace9d2d8eaa1270b9d530a4fc14c855
app_voicemail wasn't properly cleaning up the stasis cache or the
mwi topic pool when the module was unloaded or when a user was
deleted as a result of a reload. This resulted in leaks in both
areas.
* app_voicemail now calls ast_delete_mwi_state_full when it frees
a user structure and ast_delete_mwi_state_full in turn now calls
the new stasis_topic_pool_delete_topic function to clear the topic
from the pool.
Change-Id: Ide23144a4a810e7e0faad5a8e988d15947965df8
The append_mailbox function wasn't calculating the correct length
to pass to ast_alloca and it wasn't handling the case where context
might be empty.
Found by the Address Sanitizer.
Change-Id: I7eb51c7bd18a7a8dbdba261462a95cc69e84f161
app_voicemail was using the stasis cache to build and maintain a
list of mailboxes that had subscribers. It then used this list
to determine if a mailbox should be polled for new messages if
polling was enabled. For this to work, stasis had to cache every
subscription and unsubscription to the mailbox which caused a lot of
overhead, both cpu and memory related.
Since polling is only required when changes are being made to
mailboxes outside of app_voicemail and since the number of mailboxes
that don't have any subscribers is likely to be very low, all
mailboxes are now polled instead of just the ones with subscribers.
This paves the way for disabling the caching of stasis subscription
change messages.
Also fixed cleanup in some of the unit tests that not only left
test users in the users list but also caused segfaults if the tests
were run more than once.
ASTERISK-27121
Change-Id: I5cceb737246949f9782955c64425b8bd25a9e9ee
I'm only seeing an error in 14+, so I assume it is due to different
compiler options:
app_queue.c: In function ‘handle_queue_add_member’:
app_queue.c:10234:19: error: ‘%d’ directive writing between 1 and 11
bytes into a region of size 3 [-Werror=format-overflow=]
sprintf(num, "%d", state);
^~
app_queue.c:10234:18: note: directive argument in the range
[-2147483648, 99]
sprintf(num, "%d", state);
^~~~
Compiler: gcc version 8.0.1 20180414 (experimental)
[trunk revision 259383] (Ubuntu 8-20180414-1ubuntu2)
Change-Id: I18577590da46829c1ea7d8b82e41d69f105baa10
When a call leaves a queue on leaveempty condition, QUEUESTATUS
must be set to LEAVEEMPTY, no matter whether Queue was executed with or
without the "c" (continue) option.
The regression was introduced in the fix for ASTERISK_25665.
The following fix (ASTERISK_27065) was incomplete, as QUEUESTATUS was
overwritten in case when "c" is set, regardless of what was the cause
for leaving the queue.
ASTERISK-27973 #close
Reported-by: Valentin Safonov
Change-Id: Iec013fe6a26a4e825ca572a1dda4f3cee5f6f80c
I have removed the STATIC_BUILD option immediately as it has not
been maintained in many years and is non-functional.
ASTERISK-27965
Change-Id: I64783d017b86dba9ee3c7bcfb97e59889a3f76d7
Previously, the msid "label" attribute was used to correlate
participant info but because streams could be reused, the msid
wasn't being updated correctly when someone left the bridge and
another joined.
Now, instead of looking for the msid attribute on a channel's streams,
app_confbridge sets an "SDP:LABEL" attribute on the stream which
res_pjsip_sdp_rtp looks for. If it finds it, it adds a "label"
attribute to the current sdp.
Change-Id: I6cbaa87fb59a2e0688d956e72d2d09e4ac20d5a5
If a conference is ended very quickly after it was created (i.e., the
first user immediately hangs up) then the conference bridge and announcer
channels are not removed.
When a conference is created, the push_announcer() function is added to
the playback queue task processor and the conference object reference is
bumped. If a conference is ended while the push_announcer() function is
still going then the ao2_cleanup(conference) at the end of
push_announcer() will call the destructor function -
destroy_conference_bridge().
The destroy_conference_bridge() function will then add the
hangup_playback() task to the playback queue and will wait for it to end.
Since it is already a current task of the playback queue it will wait
forever.
This patch makes the conference thread call push_announcer() directly.
This way the conference object reference bump is not needed. Since the
playback queue task processor is only used by the conference thread
itself, there is no danger of trying to play announcements before the
announcer is pushed to the bridge.
ASTERISK-27870 #close
Change-Id: I947a50fb121422d90fd1816d643a54d75185a477
With the participant info code in app_confbridge, we were still
in the process of adding the channel to the bridge when trying to send
an in-dialog MESSAGE. This caused 2 threads to grab the channel
blocking flag at the same time. To mitigate this, the participant
info code was moved to confbridge_manager so it runs after all
channel/bridge actions have finished.
Change-Id: I228806ac153074f45e0b35d5236166e92e132abd
Add predial handler support to app_queue. app_dial (ASTERISK_19548) and
app_originate (ASTERISK_26587) have the ability to execute predial
handlers on caller and callee channels. This patch adds predial handlers
to app_queue and uses the same options as Dial and Originate (b and B).
The caller routine gets executed when the caller first enters the queue.
The callee routine gets executed for each queue member when they are about
to be called.
ASTERISK-27912
Change-Id: I5acf5c32587ee008658d12e8a8049eb8fa4d0f24
There can be one and only one thread handling a channel's media at a time.
Otherwise, we don't know which thread is going to handle the media frames.
ASTERISK-27625
Change-Id: Ia341f1a6f4d54f2022261abec9021fe5b2eb4905
This patch changes the way asterisk polls output from mpg123, instead
of waiting for 10 seconds(when playing an http url) it now uses a
timeout of one second and iterates 10 times using this same timeout.
The main difference is that for every timeout asterisk receives it now
checks if mpg123 is still running before poll again.
ASTERISK-27752
Change-Id: Ib7df8462e3e380cb328011890ad9270d9e9b4620
ConfBridge can now send events to participants via in-dialog MESSAGEs.
All current Confbridge events are supported, such as ConfbridgeJoin,
ConfbridgeLeave, etc. In addition to those events, a new event
ConfbridgeWelcome has been added that will send a list of all
current participants to a new participant.
For all but the ConfbridgeWelcome event, the JSON message contains
information about the bridge, such as its id and name, and information
about the channel that triggered the event such as channel name,
callerid info, mute status, and the MSID labels for their audio and
video tracks. You can use the labels to correlate callerid and mute
status to specific video elements in a webrtc client.
To control this behavior, the following options have been added to
confbridge.conf:
bridge_profile/enable_events: This must be enabled on any bridge where
events are desired.
user_profile/send_events: This must be set for a user profile to send
events. Different user profiles connected to the same bridge can have
different settings. This allows admins to get events but not normal
users for instance.
user_profile/echo_events: In some cases, you might not want the user
triggering the event to get the event sent back to them. To prevent it,
set this to false.
A change was also made to res_pjsip_sdp_rtp to save the generated msid
to the stream so it can be re-used. This allows participant A's video
stream to appear as the same label to all other participants.
Change-Id: I26420aa9f101f0b2387dc9e2fd10733197f1318e
There was no real reason to limit the conteny type to text/plain other
than that's what it was limited to before. Now any text/* content
type will be allowed for channel drivers that don't support enhanced
messaging and any type will be allowed for channel drivers that do
support enhanced messaging.
Change-Id: I94a90cfee98b4bc8e22aa5c0b6afb7b862f979d9
When an AMI client connects, it cannot determine if a user was talking
prior to a transition in the user speaking state (which would generate
a ConfbridgeTalking event). This patch causes app_confbridge to track the
talking state and make this state available via ConfBridgeList.
ASTERISK-27877 #close
Change-Id: I19b5284f34966c3fda94f5b99a7e40e6b89767c6
The MeetmeJoin, MeetmeLeave, MeetmeEnd, MeetmeMute, MeetmeTalking, and
MeetmeTalkRequest AMI events were documented with sending out a Usernum
header when the User header was actually output.
* Change the online documentation to match reality.
ASTERISK-27873
ASTERISK-25261
Change-Id: I437bc70618d07c183c9624b7069c2fcae7f17a39
Richard Mudgett
Joshua C. Colp
Frederic LE FOLL
Walter Doekes
George Joseph
Michael Cargile
lvl
Kevin Harwell
cmaj
Sean Bright
Corey Farrell
Alexei Gradinari
Chris-Savinovich
Nasir Iqbal
Joshua Colp
Friendly Automation
agupta
Rodrigo Ramírez Norambuena
Antoni Goldstein
Dömsödi Gergely
Bryan Boatright
Cao Minh Hiep
Ivan Poddubny
Robert Mordec
Kristian F. Høgh
Sam Wierema
William McCall