asterisk

Commit Graph

Author	SHA1	Message	Date
George Joseph	751d7a5a49	alembic: Remove batch operations (and sqlite support) Because SQLite doesn't support full ALTER capabilities, alembic scripts require batch operations. However, that capability wasn't available until 0.7.0 which some distributions haven't reached yet. Therefore, the batch operations introduced in commit `86d6e44cc` (review 2319) have been reverted and SQLite is unsupported again, for now anyway. Tested the full upgrade and downgrade on MySQL/Mariadb and Postgresql. ASTERISK-25890 #close Reported-by: Harley Peters Change-Id: I82eba5456736320256f6775f5b0b40133f4d1c80	9 years ago
Joshua Colp	3e5672d843	res_pjsip: Fix configuration setting of "regcontext". Due to a merge problem two options were swapped causing the regcontext setting to not get set. Change-Id: Icb33edc668e7357bacbaec2861a6b5ac64edaff1	9 years ago
Jacek Konieczny	8ed5f61152	frame.c: Copy the whole subclass in ast_frdup(). The problem is ast_frdup() does not copy whole frame.subclass for voice, video and image frames, only the format is copied. For video frames, the subclass structure contains the .frame_ending flag used to put the RTP marker where it needs to be. ASTERISK-25894 #close Change-Id: I812ca90e84ed5d4f473b997d0dd0d3c5a915fe33	9 years ago
Joshua Colp	97db0ca884	Merge "res_pjsip: Handle deferred SDP hold/unhold properly."	9 years ago
Joshua Colp	72ef79dc2d	Merge "ARI: Add method to Dial a created channel."	9 years ago
Joshua Colp	3b71f09bb7	Merge "ARI: Add method to create a new channel."	9 years ago
Mark Michelson	abbb2edd4c	ARI: Add method to Dial a created channel. This adds a new ARI method that allows for you to dial a channel that you previously created in ARI. By combining this with the create method for channels, it allows for a workflow where a channel can be created, manipulated, and then dialed. The channel is under control of the ARI application during all stages of the Dial and can even be manipulated based on channel state changes observed within an ARI application. The overarching goal for this is to eventually be able to add a dialed channel to a Stasis bridge earlier than the "Up" state. However, at the moment more work is needed in the Dial and Bridge APIs in order to facilitate that. ASTERISK-25889 #close Change-Id: Ic6c399c791e66c4aa52454222fe4f8b02483a205	9 years ago
Mark Michelson	dd48d60c5b	ARI: Add method to create a new channel. This adds a new ARI method to the channels resource that allows for the creation of a new channel. The channel is created and then placed into the specified Stasis application. This is different from the existing originate method that creates a channel, dials it, and then places the answered channel into the dialplan or a Stasis application. This method does not attempt to call the channel at all. Dialing is left as a later step after channel creation. This allows for pre-dialing channel manipulation if desired. ASTERISK-25889 Change-Id: I3c96a0aba914b08e39f6256371a5bd4c92cbded8	9 years ago
Joshua Colp	4d06a4f366	Merge "Dial: Add function to append already-created channel."	9 years ago
Joshua Colp	c49ee63db1	Merge "config: Allow filters when appending to a category"	9 years ago
Mark Michelson	a098251e7e	res_pjsip: Handle deferred SDP hold/unhold properly. Some SIP devices indicate hold/unhold using deferred SDP reinvites. In other words, they provide no SDP in the reinvite. A typical transaction that starts hold might look something like this: * Device sends reinvite with no SDP * Asterisk sends 200 OK with SDP indicating sendrecv on streams. * Device sends ACK with SDP indicating sendonly on streams. At this point, PJMedia's SDP negotiator saves Asterisk's local state as being recvonly. Now, when the device attempts to unhold, it again uses a deferred SDP reinvite, so we end up doing the following: * Device sends reinvite with no SDP * Asterisk sends 200 OK with SDP indicating recvonly on streams * Device sends ACK with SDP indicating sendonly on streams The problem here is that Asterisk offered recvonly, and by RFC 3264's rules, if an offer is recvonly, the answer has to be sendonly. The result is that the device is not taken off hold. What is supposed to happen is that Asterisk should indicate sendrecv in the 200 OK that it sends. This way, the device has the freedom to indicate sendrecv if it wants the stream taken off hold, or it can continue to respond with sendonly if the purpose of the reinvite was something else (like a session timer refresher). The fix here is to alter the SDP negotiator's state when we receive a reinvite with no SDP. If the negotiator's state is currently in the recvonly or inactive state, then we alter our local state to be sendrecv. This way, we allow the device to indicate the stream state as desired. ASTERISK-25854 #close Reported by Robert McGilvray Change-Id: I7615737276165eef3a593038413d936247dcc6ed	9 years ago
Mark Michelson	ef4d3f1328	Dial: Add function to append already-created channel. The Dial API takes responsiblity for creating an outbound channel when calling ast_dial_append(). This commit adds a new function, ast_dial_append_channel(), which allows us to create the channel outside the Dial API and then to append the channel to the ast_dial structure. This is useful for situations where the channel's creation and dialing are distinct operations. Upcoming ARI early bridge work will illustrate its usage. ASTERISK-25889 Change-Id: Id8179f64f8f99132f80dead8d5db2030fd2c0509	9 years ago
Joshua Colp	1805d8a57b	Merge "res_http_websocket: Make core supported."	9 years ago
Joshua Colp	245c9ca5ce	Merge "stringfields: Refactor to allow fields to be added to the end of structures"	9 years ago
George Joseph	984d6fd95c	config: Allow filters when appending to a category In sorcery based config files where there are multiple categories with the same name, you can't use the (+) operator to reliably append to a category because config.c stops looking when it finds the first one with the same name. Example: [1000] type = endpoint [1000] type = aor [1000](+) authenticate_qualify = yes This config will fail because config.c appends authenticate_qualify to the first category it finds, the endpoint, and that's not valid for endpoint. Solution: The capability to find a category that contains a certain variable already exists so the only real change was to parse anything after the '+' that's not a comma, as a filter string. [1000] type = endpoint [1000] type = aor [1000](+type=aor) authenticate_qualify = yes This now works as expected. Although the following example doesn't make any sense for pjsip, you can even specify multiple filters: [1000](+type=aor&qualify_frequency=10) ASTERISK-25868 #close Reported-by: Nick Repin Change-Id: I10773da4c79db36fbf1993961992af63d3441580	9 years ago
Joshua Colp	784fb43f43	res_http_websocket: Make core supported. Websockets are a core part of ARI support and as such this module should also be core supported. Change-Id: I8f9283c6a167152761b92984779bb39e3db51a9c	9 years ago
Joshua Colp	051da5c3af	Merge "res_rtp_asterisk: Use separate SRTP session for RTCP with DTLS"	9 years ago
George Joseph	4d40b161c3	stringfields: Refactor to allow fields to be added to the end of structures String fields are great, except that you can't add new ones without breaking ABI compatibility because it shifts down everything else in the structure. The only alternative is to add your own char * field to the end of the structure and manage the memory yourself which isn't ideal, especially since you then can't use the OPT_STRINGFIELD_T type. Background: The reason string fields had to be declared inside the AST_DECLARE_STRING_FIELDS block was to facilitate iteration over all declared fields for initialization, compare and copy. Since AST_DECLARE_STRING_FIELDS declared the pool, then the fields, then the manager, you could use the offsets of the pool and manager and iterate over the sequential addresses in between to access the fields. The actual pool, field allocation and field set operations don't actually care where the field is. It's just iteration over the fields that was the problem. Solution: Extended String Fields An extended string field is one that is declared outside the AST_DECLARE_STRING_FIELDS block but still (anywhere) inside the parent structure. Other than using AST_STRING_FIELD_EXTENDED instead of AST_STRING_FIELD, it looks the same as other string fields. It's storage comes from the pool and it participates in string field compare and copy operations peformed on the parent structure. It's also a valid target for the OPT_STRINGFIELD_T aco option type. Implementation: To keep track of the extended fields and make sure that ABI isn't broken, the existing embedded_pool pointer in the manager structure was repurposed to be a pointer to a separate header structure that contains the embedded_pool pointer plus a vector of fields. The length of the manager structure didn't change and the embedded_pool pointer isn't used in the macros, only the stringfields C code. A side benefit of this is that changing the header structure in the future won't break ABI. ast_string_fields_init initializes the normal string fields and appends them to the vector, and subsequent calls to ast_string_field_init_extended initialize and append the extended fields. Cleanup, ast_string_fields_cmp, and ast_string_fields_copy can now work on the vector instead of sequentially traversing the addresses between the pool and manager. The total size of a structure using string fields didn't change, whether using extended fields or not, nor have the offsets of any structure members, either inside the original block or outside. Adding an extended field to the end of a structure is the same as adding a char . Details: The stringfield C code was pulled out from utils.c and into stringfields.c. It just made sense. Additional work was done in ast_string_field_init and ast_calloc_with_stringfields to handle the allocation of the new header structure and the vector, and the associated cleanup. In the process some additional NULL pointer checking was added. A lot of work was done in stringfields.h since the logic for compare and copy is there. Documentation was added as well as somne additional NULL checking. The ability to call ast_calloc_with_stringfields with a number of structures greater than 1 never really worked. Well, the calloc worked but there was no way to access the additional structures or clean them up. It was agreed that there was no use case for requesting more than 1 structure so an ast_assert was added to prevent it and the iteration code removed. Testing: The stringfield unit tests were updated to test both normal and extended fields. Tests for ast_string_field_ptr_set_by_fields and ast_calloc_with_stringfields were also added. As an ABI test, 13 was compiled from git and the res_pjsip_ modules, except res_pjsip itself, saved off. The patch was then added and a full compile and install was performed. Then the older res_pjsip_* moduled were copied over the installed versions so res_pjsip was new and the rest were old. No issues. contact->aor, which is a char * at the end of contact, was then changed to an extended string field and a recompile and reinstall was performed, again leaving stock versions of the the res_pjsip_* modules. Again, no issues with the res_pjsip_* modules using the old stringfield implementation and with contact->aor as a char *, and res_pjsip itself using the new stringfield implementation and contact->aor being an extended string field. Finally, several existing string fields were converted to extended string fields to test OPT_STRINGFIELD_T. Again, no issues. Change-Id: I235db338c5b178f5a13b7946afbaa5d4a0f91d61	9 years ago
George Joseph	c07e1190ec	res_pjsip_mwi: Fix segv caused by `16c7d8e74a` I forgot the new voicemail_extension wasn't a stringfield and didn't check for NULL where I should have. Change-Id: I029482d5c2ab72474838750461bd46b0809c90fb	9 years ago
Joshua Colp	86ccd1bd2b	Merge "install_prereq: Fix check_installed_debs remove subversion"	9 years ago
Joshua Colp	abf241b94f	Merge "res_pjsip_mwi: Allow subscribe to vm access extension as an alias"	9 years ago
Joshua Colp	96dcd81110	Merge "res_pjsip_mwi: Add voicemail extension and mwi_subscribe_replaces_unsolicited"	9 years ago
George Joseph	060b7b83bc	install_prereq: Fix check_installed_debs remove subversion check_installed_debs wasn't handling virtual packages like libsrtp-dev and libresample-dev and on multiarch systems it was accidentally filtering out all packages if any :i386 packages were found instead of just filtering out the :i386 packages themselves. Change-Id: Ifd68da0d1ee30cc84df14de3f9b9079d7c3cecda	9 years ago
George Joseph	433d2c4bbf	utils.c: Fix typo in handle_show_locks ast_cli_allow_on_shutdown(e) should have been ast_cli_allow_at_shutdown(e). Change-Id: I4f092495c0b2bfd85c2651e0b5877bf4d05d9faf	9 years ago
zuul	a04a62586f	Merge "chan_sip: Do not send all codecs on INVITE. Do not break on Session-Timers."	9 years ago
zuul	e2a8033d09	Merge "res_stasis: Add control ref to playback and recording structs."	9 years ago
Joshua Colp	0ec3299c5f	Merge "pjproject_bundled: Fix use of LDCONFIG for shared library link creation"	9 years ago
zuul	cd6d478d3f	Merge "res_stasis: Fix crash on a hanging up channel."	9 years ago
Joshua Colp	7372925a5b	Merge "res_stasis.c: Protect channel datastore list from stasis end."	9 years ago
Joshua Colp	99c749cf26	Merge "res_rtp_asterisk: Fix placement of txcount increment"	9 years ago
zuul	b2bcad9d62	Merge "core_unreal.c: Add clarification comment about channel ref."	9 years ago
Joshua Colp	41cedd9896	Merge "res_ari: Cannot get control also means channel is unavailable."	9 years ago
George Joseph	304f81780d	pjproject_bundled: Fix use of LDCONFIG for shared library link creation LDCONFIG apparently isn't set to something sane on all systems so the creation of the shared library links fails. Instead of just testing for non-blank, main/Makefile now checks that LDCONFIG is actually executable and reverts to LN if it isn't. This applies to both libasteriskpj and libasteriskssl. Thanks to 'abelbeck' for pointing out that the issue was LDCONFIG. ASTERISK-25873 #close Reported-by: Hans van Eijsden Change-Id: I25b76379bc637726ec044b2c0e709b56b3701729	9 years ago
Richard Mudgett	0ea742d33a	res_stasis: Add control ref to playback and recording structs. The stasis_app_playback and stasis_app_recording structs need to have a struct stasis_app_control ref. Other threads can get a reference to the playback and recording structs from their respective global container. These other threads can then use the control pointer they contain after the control struct has gone. * Add control ref to stasis_app_playback and stasis_app_recording structs. With the refs added, the control command queue can now have a circular control reference which will cause the control struct to never get released if the control's command queue is not flushed when the channel leaves the Stasis application. Also the command queue needs better protection from adding commands if the control->is_done flag is set. * Flush the control command queue on exit. ASTERISK-25882 #close Change-Id: I3cf1fb59cbe6f50f20d9e35a2c07ac07d7f4320d	9 years ago
Richard Mudgett	53f63ad770	res_stasis: Fix crash on a hanging up channel. * Give the struct stasis_app_control ao2 object a ref to the channel held in the object. Now the channel will still be around if a thread needs to post a stasis message instead of crash because the topic was destroyed. * Moved stopping any lingering silence generator out of the struct stasis_app_control destructor and made it a part of exiting the Stasis application. Who knows which thread the destructor will be called under so it cannot affect the channel's silence generator. Not only was the channel unprotected when the silence generator was stopped, stasis may no longer even control the channel. ASTERISK-25882 Change-Id: I21728161b5fe638cef7976fa36a605043a7497e4	9 years ago
Richard Mudgett	2fab4d7da8	res_stasis.c: Protect channel datastore list from stasis end. Change-Id: Ifadc469590bd4d5368e19d3763db3bd1f80fdb95	9 years ago
Richard Mudgett	ece2edaa04	res_ari: Cannot get control also means channel is unavailable. The only caller of ari_bridges_play_found() has this note: If ari_bridges_play_found fails because the channel is unavailable for playback, The channel will be removed from the playback list soon. We can keep trying to get channels from the list until we either get one that will work or else there isn't a channel for this bridge anymore, in which case we'll revert to ari_bridges_play_new. Change-Id: Ib068141b367ccaa17be0dab4181c98e26c5127d6	9 years ago
Richard Mudgett	2f36cba4b5	res_stasis_recording.c: Cleanup stasis_app_recording_find_by_name(). Change-Id: Ic7d93c402c498677a122505558859c853d4e5ac7	9 years ago
Richard Mudgett	34457dd9db	core_unreal.c: Add clarification comment about channel ref. Change-Id: I0be0627260cd8d6b6c3cc345949dcfdf32eff1f3	9 years ago
George Joseph	2b3261cd36	res_pjsip_mwi: Allow subscribe to vm access extension as an alias Background: If your extension is 1000 and the voicemail access extension is 1571 and you dial 1571, usually a dialplan rule calls voicemailmain with your extension and you are placed directly in your mailbox. Therefore most admins program the voicemail (or other speed dial) button on their phones to the access extension. Some phones (Snom at least) use whatever is programmed there to also subscribe for MWI and so can't dial one number and subscribe to another. This works fine in chan_sip because chan_sip completely ignores the user portion of the SUBSCRIBE message request URI. If it can match the peer, is subscribes to the peer's mailbox. The user could be set to anything or nothing and you'd still get subscribed to your mailbox. Issue: chan_pjsip actually uses the user portion of the URI to find an aor and its mailboxes. Therefore a subscribe to 1571 results in a 404. Sure, you can create an aor for 1571 but you certainly can't add your entire voicemail system's mailboxes to it and everyone would get notified of every MWI. Solution: When an MWI subscribe comes in and an aor can't be found that matches the resource directly, check the resource against the endpoint's aors. If an aor is found that has a voicemail_extension that matches the resource, use it. ASTERISK-25865 Reported-by: Ross Beer Change-Id: I770ea185f751f1ada888fafb4b452115f1c06e9e	9 years ago
George Joseph	e2524fcee3	res_pjsip_mwi: Add voicemail extension and mwi_subscribe_replaces_unsolicited res_pjsip_mwi was missing the chan_sip "vmexten" functionality which adds the Message-Account header to the MWI NOTIFY. Also, specifying mailboxes on endpoints for unsolicited mwi and on aors for subscriptions required that the admin know in advance which the client wanted. If you specified mailboxes on the endpoint, subscriptions were rejected even if you also specified mailboxes on the aor. Voicemail extension: * Added a global default_voicemail_extension which defaults to "". * Added voicemail_extension to both endpoint and aor. * Added ast_sip_subscription_get_dialog for support. * Added ast_sip_subscription_get_sip_uri for support. When an unsolicited NOTIFY is constructed, the From header is parsed, the voicemail extension from the endpoint is substituted for the user, and the result placed in the Message-Account field in the body. When a subscribed NOTIFY is constructed, the subscription dialog local uri is parsed, the voicemail_extension from the aor (looked up from the subscription resource name) is substituted for the user, and the result placed in the Message-Account field in the body. If no voicemail extension was defined, the Message-Account field is not added to the NOTIFY body. mwi_subscribe_replaces_unsolicited: * Added mwi_subscribe_replaces_unsolicited to endpoint. The previous behavior was to reject a subscribe if a previous internal subscription for unsolicited MWI was found for the mailbox. That remains the default. However, if there are mailboxes also set on the aor and the client subscribes and mwi_subscribe_replaces_unsolicited is set, the existing internal subscription is removed and replaced with the external subscription. This allows an admin to configure mailboxes on both the endpoint and aor and allows the client to select which to use. ASTERISK-25865 #close Reported-by: Ross Beer Change-Id: Ic15a9415091760539c7134a5ba3dc4a6a1217cea	9 years ago
zuul	23d2a561d5	Merge "res_pjsip/pjsip_options: Fix From generation on outgoing OPTIONS"	9 years ago
George Joseph	724b9ab28f	res_rtp_asterisk: Fix placement of txcount increment Commit `1bce690ccb` was incrementing txcount for rtcp packets as well as rtp packets and that was causing sender reports to be generated instead of receiver reports in cases where no rtp was actually being sent. Moved the txcount increment from __rtp_sento, which handles both rtp and rtcp, to rtp_sento which only handles rtp packets. Discovered by the hep/rtcp-receiver test. Change-Id: Ie442e4bb947a68847a676497021ba10ffaf376d5	9 years ago
George Joseph	c4064727d2	chan_pjsip: Add 'pjsip show channelstats' Added the ability to show channel statistics to chan_pjsip (cli_functions.c) Moved the existing 'pjsip show channel(s)' functionality from pjsip_configuration to cli_functions.c. The stats needed chan_pjsip's private header so it made sense to move the existing channel commands as well. Now using stasis_cache_dump to get the channel snapshots rather than retrieving all endpoints, then getting each one's channel snapshots. Much more efficient. Change-Id: I03b114522126d27434030b285bf6d531ddd79869	9 years ago
Joshua Colp	03845666da	Merge "res_rtp_asterisk: Fix packet stats on bridged connection"	9 years ago
zuul	2a7bc6b2aa	Merge "sorcery/res_pjsip: Refactor for realtime performance"	9 years ago
Jacek Konieczny	970803efcb	res_rtp_asterisk: Use separate SRTP session for RTCP with DTLS Asterisk uses separate UDP ports for RTP and RTCP traffic and RFC 5764 explicitly states: There MUST be a separate DTLS-SRTP session for each distinct pair of source and destination ports used by a media session This means RTP keying material cannot be used for DTLS RTCP, which was the reason why RTCP encryption would fail. ASTERISK-25642 Change-Id: I7e8779d8b63e371088081bb113131361b2847e3a	9 years ago
Jacek Konieczny	9785e8d090	app_echo: forward and generate VIDUPDATE frames When using app_echo via WebRTC with VP8 video the video would appear only after a few minutes, because there would be nothing to request a full reference frame. This fixes the problem in both ways: - echos any VIDUPDATE frames received on the channel - sends one such frame when first video frame is to be forwarded This makes the echo work with Firefox and Chrome WebRTC implementation. ASTERISK-25867 #close Change-Id: I73bda87bf7532ee8bfb28d917045a21034908c1e	9 years ago
Joshua Colp	6ce25bd62a	Merge "res_parking: Misc fixes."	9 years ago
George Joseph	44ffb5105a	res_rtp_asterisk: Fix packet stats on bridged connection rxcount, txcount, rxoctetcount and txoctetcount weren't being calculated for bridged streams because the calulations were being done after the bridged short-circuit. Actually, rxoctetcount wasn't ever being calculated. Moved the calculations so they occur for all valid received packets and all transmitted packets. Also added rxoctetcount and txoctetcount to ast_rtp_instance_stat. Change-Id: I08fb06011a82d38c3b4068867a615068fbe59cbb	9 years ago

1 2 3 4 5 ...

27714 Commits (751d7a5a49e67d0e13331c7a89c7eaa4724d1c87) All Branches Search

27714 Commits (751d7a5a49e67d0e13331c7a89c7eaa4724d1c87)

All Branches