28683 Commits (72ae513f1529a1ac0c55c069db4e06f5732103ef)

 

All Branches   

Search

Author	SHA1	Message	Date
zuul	72ae513f15	Merge "res_hep: Capture actual transport type in use" into 13	8 years ago
Sean Bright	218f618095	res_hep: Capture actual transport type in use ... Rather than hard-coding UDP, allow consumers of the HEP API to specify which protocol is in use. Update the PJSIP provider to pass in the current protocol type. ASTERISK-26850 #close Change-Id: I54bbb0a001cfe4c6a87ad4b6f2014af233349978	8 years ago
Sean Bright	7f34c11b6a	bridge_softmix: Ignore non-voice frames from translator ... Some codecs - codec_speex specifically - take voice frames and return other types of frames, like CNG. If we subsequently treat those as voice frames, we'll run into trouble when destroying the frame because of the requirement that each voice frame have an associated format. ASTERISK-26880 #close Reported by: Kirsty Tyerman Change-Id: I43f8450c48fb276ad8b99db8512be82949c1ca7c	8 years ago
zuul	fdea369852	Merge "res/res_pjsip_session: Only check localnet if it is defined" into 13	8 years ago
Joshua Colp	9613391868	Merge "thread safety: Don't use getprotobyname()" into 13	8 years ago
Sean Bright	38cebc73a3	thread safety: Don't use getprotobyname() ... POSIX does not require getprotobyname() to be thread safe and some implementations use static memory which causes issues when multiple threads are used. Further, our usage of it today is just to ultimately get IPPROTO_TCP for calls to setsockopt(). So instead we just use IPPROTO_TCP directly. Change-Id: I2e14e58674808f7ce99b2f5e900d0f90d0d8da48	8 years ago
Sean Bright	265455bc2d	res_rtp_asterisk: Pass correct data length to ast_rtcp_interpret ... We are currently passing in the capacity of the read buffer instead of the number of bytes that we actually read off the wire. Change-Id: I60465049727d955c7f9a5e529e6f2aaff04cda36	8 years ago
Joshua Colp	baeabb82ea	Merge "app_queue: Fix locking behavior in stasis message handlers" into 13	8 years ago
Joshua Colp	1b828e50fe	Merge "chan_sip: Add rtcp-mux support" into 13	8 years ago
Joshua Colp	130af0ab80	Merge "res_rtp_asterisk: Fix crash when RTCP is not present when DTLS is stopped." into 13	8 years ago
Joshua Colp	a2d29a7545	Merge "res_pjsip_asterisk.c: Fix compile error if libsrtp is not installed." into 13	8 years ago
Joshua Colp	e76947bd88	Merge "app_confbridge: Fix ConfbridgeTalking AMI event description." into 13	8 years ago
Joshua Colp	6da1b60918	Merge "res_pjsip_sdp_rtp.c: Fix cut-n-paste error" into 13	8 years ago
Sean Bright	9a57b24e17	app_queue: Fix locking behavior in stasis message handlers ... The queue_stasis_data structure contains various mutable fields that require appropriate locking. Specifically, the 'dying,' 'member_uniqueid,' and 'caller_uniqueid' fields need to be locked when read from or written to. Change-Id: I246b7dbff8447acc957a1299f6ad0ebd0fd39088	8 years ago
Joshua Colp	161fe61a0f	Merge "res_pjsip_sdp_rtp: RTP instance does not use same IP as explicit transport" into 13	8 years ago
Sean Bright	8721d0bf1b	chan_sip: Add rtcp-mux support ... ASTERISK-26846 #close Change-Id: I541a1602ff55ab73684e9f8002edb9e0e745d639	8 years ago
Richard Mudgett	792171ea9e	app_confbridge: Fix ConfbridgeTalking AMI event description. ... Thanks to Chris Howard for pointing this out on the wiki. Change-Id: I18e56de09a70e736b5d04719d45ef29cf0636705	8 years ago
Richard Mudgett	047fb7f11e	res_pjsip_asterisk.c: Fix compile error if libsrtp is not installed. ... struct ast_rtcp does not define the dtls member if SRTP is not enabled. ASTERISK-26732 Change-Id: Id15ea212e04490e012f2cf4a56818b4dd948875e	8 years ago
Richard Mudgett	a75f02c089	res_pjsip_sdp_rtp.c: Fix cut-n-paste error ... We were inadvertenly referencing the cos_video option to determine if we should set the tos_audio and cos_audio value on the RTP instance. Change-Id: Ia7964f486801d39dc6f5dae570baff079e1595b0	8 years ago
Matt Jordan	776ffd7724	res/res_pjsip_session: Only check localnet if it is defined ... If local_net is not defined on a transport, transport_state->localnet will be NULL. ast_apply_ha will, be default, return AST_SENSE_ALLOW in this case, causing the external_media_address, if set, to be skipped. This patch causes us to only check if we are sending within a network if local_net is defined. ASTERISK-26879 #close Change-Id: Ib661c31a954cabc9c99f1f25c9c9a5c5b82cbbfb	8 years ago
Richard Begg	139bc3495f	res_pjsip_sdp_rtp: RTP instance does not use same IP as explicit transport ... Currently a wildcard address is used for the local RTP socket, which will not always result in the same address as used by the SIP socket (e.g. if explicit transport addresses are configured). Use the transport's host address when binding new local RTP sockets if available. ASTERISK-26851 Change-Id: I098c29c9d1f79a4f970d72ba894874ac75954f1a	8 years ago
Joshua Colp	7ea7797e12	res_rtp_asterisk: Fix crash when RTCP is not present when DTLS is stopped. ... This change removes an assumption that when DTLS is stopped an RTCP session will be present on the RTP session. This is not always the case. ASTERISK-26732 Change-Id: Ib9f7c09ce0b005efe362dbcc8795202b18f94611	8 years ago
George Joseph	9b756662a8	res_pjsip: Symmetric transports ... A new transport parameter 'symmetric_transport' has been added. When a request from a dynamic contact comes in on a transport with this option set to 'yes', the transport name will be saved and used for subsequent outgoing requests like OPTIONS, NOTIFY and INVITE. It's saved as a contact uri parameter named 'x-ast-txp' and will display with the contact uri in CLI, AMI, and ARI output. On the outgoing request, if a transport wasn't explicitly set on the endpoint AND the request URI is not a hostname, the saved transport will be used and the 'x-ast-txp' parameter stripped from the outgoing packet. * config_transport was modified to accept and store the new parameter. * config_transport/transport_apply was updated to store the transport name in the pjsip_transport->info field using the pjsip_transport->pool on UDP transports. * A 'multihomed_on_rx_message' function was added to pjsip_message_ip_updater that, for incoming requests, retrieves the transport name from pjsip_transport->info and retrieves the transport. If transport->symmetric_transport is set, an 'x-ast-txp' uri parameter containing the transport name is added to the incoming Contact header. * An 'ast_sip_get_transport_name' function was added to res_pjsip. It takes an ast_sip_endpoint and a pjsip_sip_uri and returns a transport name if endpoint->transport is set or if there's an 'x-ast-txp' parameter on the uri and the uri host is an ipv4 or ipv6 address. Otherwise it returns NULL. * An 'ast_sip_dlg_set_transport' function was added to res_pjsip which takes an ast_sip_endpoint, a pjsip_dialog, and an optional pjsip_tpselector. It calls ast_sip_get_transport_name() and if a non-NULL is returned, sets the selector and sets the transport on the dialog. If a selector was passed in, it's updated. * res_pjsip/ast_sip_create_dialog_uac and ast_sip_create_dialog_uas were modified to call ast_sip_dlg_set_transport() instead of their original logic. * res_pjsip/create_out_of_dialog_request was modified to call ast_sip_get_transport_name() and pjsip_tx_data_set_transport() instead of its original logic. * Existing transport logic was removed from endpt_send_request since that can only be called after a create_out_of_dialog_request. * res_pjsip/ast_sip_create_rdata was converted to a wrapper around a new 'ast_sip_create_rdata_with_contact' function which allows a contact_uri to be specified in addition to the existing parameters. (See below) * res_pjsip_pubsub/internal_pjsip_evsub_send_request was eliminated since all it did was transport selection and that is now done in ast_sip_create_dialog_uac and ast_sip_create_dialog_uas. * 'contact_uri' was added to subscription_persistence. This was necessary because although the parsed rdata contact header has the x-ast-txp parameter added (if appropriate), subscription_persistence_update stores the raw packet which doesn't have it. subscription_persistence_recreate was then updated to call ast_sip_create_rdata_with_contact with the persisted contact_uri so the recreated subscription has the correct transport info to send the NOTIFYs. * res_pjsip_session/internal_pjsip_inv_send_msg was eliminated since all it did was transport selection and that is now done in ast_sip_create_dialog_uac. * pjsip_message_ip_updater/multihomed_on_tx_message was updated to remove all traces of the x-ast-txp parameter from the outgoing headers. NOTE: This change does NOT modify the behavior of permanent contacts specified on an aor. To do so would require that the permanent contact's contact uri be updated with the x-ast-txp parameter and the aor sorcery object updated. If we need to persue this, we need to think about cloning permanent contacts into the same store as the dynamic ones on an aor load so they can be updated without disturbing the originally configured value. You CAN add the x-ast-txp parameter to a permanent contact's uri but it would be much simpler to just set endpoint->transport. Change-Id: I4ee1f51473da32ca54b877cd158523efcef9655f	8 years ago
Joshua Colp	57be9cf8f9	Merge "Add rtcp-mux support" into 13	8 years ago
Joshua Colp	701b753a0b	Merge "chan_iax2: Reload of iax peer results in loss of host address/port" into 13	8 years ago
zuul	9a5c028107	Merge "app_queue: Handle the caller being redirected out of a queue bridge" into 13	8 years ago
zuul	05ab662f70	Merge "pbx.c: Fix crash from malformed exten pattern." into 13	8 years ago
zuul	bcc566b77e	Merge "res/res_pjsip_refer: call xfer w/o extension" into 13	8 years ago
zuul	481ed5c8f1	Merge "res_pjsip_endpoint_identifier_ip: Don't output error if no header_match." into 13	8 years ago
zuul	aa5d108caa	Merge "configure: Don't use the progress bar with curl when downloading to stdout" into 13	8 years ago
Mark Michelson	7bc69753bc	Add rtcp-mux support ... This commit adds support for RFC 5761: Multiplexing RTP Data and Control Packets on a Single Port. Specifically, it enables the feature when using chan_pjsip. A new option, "rtcp_mux" has been added to endpoint configuration in pjsip.conf. If set, then Asterisk will attempt to use rtcp-mux with whatever it communicates with. Asterisk follows the rules set forth in RFC 5761 with regards to falling back to standard RTCP behavior if the far end does not indicate support for rtcp-mux. The lion's share of the changes in this commit are in res_rtp_asterisk.c. This is because it was pretty much hard wired to have an RTP and an RTCP transport. The strategy used here is that when rtcp-mux is enabled, the current RTCP transport and its trappings (such as DTLS SSL session) are freed, and the RTCP session instead just mooches off the RTP session. This leads to a lot of specialized if statements throughout. ASTERISK-26732 #close Reported by Dan Jenkins Change-Id: If46a93ba1282418d2803e3fd7869374da8b77ab5	8 years ago
Sean Bright	163e9e53dc	app_queue: Handle the caller being redirected out of a queue bridge ... A caller can leave the Queue() application after being bridged with a member in a few ways: * Caller or member hangup * Caller is transferred somewhere else (blind or atx) * Caller is externally redirected elsewhere The first 2 scenarios are currently handled by subscribing to stasis messages, but the 3rd is not explicitly covered. If a caller is redirected away from the Queue() application, the member who was last bridged with that caller will remain in an "In use" state until the caller hangs up. This patch adds handling of the caller leaving the queue via redirection. We monitor the caller-member bridge, and if the caller is the one that leaves, we treat it the same as we would a caller hangup. ASTERISK-26400 #close Reported by: Etienne Lessard Change-Id: Iba160907770de5a6c9efeffc9df5a13e9ea75334	8 years ago
Joshua Colp	7612601964	res_pjsip_endpoint_identifier_ip: Don't output error if no header_match. ... This change ensures that if no header_match option is set on an identify an error message is not output stating the option is set to an invalid value. ASTERISK-26863 Change-Id: I239bc6d2319dd3da24ba96a38d4d6e9b5526d62a	8 years ago
Joshua Colp	947f1ebf86	Merge "chan_pjsip: Don't assume a session will have a channel." into 13	8 years ago
Joshua Colp	0f87808414	Merge "menuselect: Add a new 'options' support type" into 13	8 years ago
Joshua Colp	475dfdb88c	Merge "configs/samples/hep.conf.sample: Clarify how the HEP stack works" into 13	8 years ago
Joshua Colp	47ccdd45ca	Merge "res_pjsip_endpoint_identifier_ip: Add an option to match requests by header" into 13	8 years ago
Joshua Colp	45d5c04fd0	Merge "main/stasis_cache: Demote the ERROR message when removing a nonexistent item" into 13	8 years ago
Torrey Searle	48447313b6	res/res_pjsip_refer: call xfer w/o extension ... When transfering to a URI without an extension, ensure that the s extension of the dialplan is entered ASTERISK-26869 #close Change-Id: I07403df66cf93f09e00a40ab5b41bfc6f72b1525	8 years ago
zuul	683321cba9	Merge "funcs/func_devstate: Remove new line in Device field of during module load" into 13	8 years ago
Joshua Colp	86c69ccdf7	Merge "res_pjsip_transport_websocket: Add support for IPv6." into 13	8 years ago
Richard Mudgett	9fd9b39e8b	pbx.c: Fix crash from malformed exten pattern. ... Forgetting to indicate an exten is a pattern can cause a crash if the "pattern" has a character set range. e.g., "9999[3-5]" The crash is due to a buffer overwrite because the '-' exten eye-candy wasn't removed as expected and overran the allocated space. The buffer overwrite is fixed two ways in this patch. 1) Fix ext_strncpy() to distinguish between pattern and non-pattern extens. Now '-' characters are removed when they are eye-candy and not when they are part of a pattern character set. Since the function is private to pbx.c, the return value now returns the number of bytes written to the destination buffer instead of the strlen() of the final buffer so the callers that care don't need to add one. 2) Fix callers to ext_strncpy() to supply the correct available buffer size of the destination buffer. ASTERISK-26668 Change-Id: I555d97411140e47e0522684062d174fbe32aa84a	8 years ago
Richard Begg	5389666d6f	chan_iax2: Reload of iax peer results in loss of host address/port ... When using a non-dynamic peer address, build_peer() invalidates the peer address structure by setting the address family to unspecified. However, if dnsmgr is enabled, the subsequent call to ast_dnsmgr_lookup() will not amend the peer address if the cache is still valid, resulting in peer connectivity failures. To fix this, we call ast_dnsmgr_refresh() instead. ASTERISK-26865 Change-Id: Id8a89a2f771ebbaf32255a35fe596a6dcb97a082	8 years ago
Matt Jordan	658d59c683	configure: Don't use the progress bar with curl when downloading to stdout ... In some scenarios, such as when there may not be a terminal (such as inside a Docker container), curl will apparently direct the progress bar to stdout. This can cause extra data to be appended to a file curl'd down to stdout, resulting in md5 verification failures. This patch removes the progress bar, and tells curl to download the file silently. ASTERISK-26872 #close Change-Id: Ie860b020f627d4372b3e7ce9453de5faafeebe6c	8 years ago
Matt Jordan	b3c2c996f1	res_pjsip_endpoint_identifier_ip: Add an option to match requests by header ... This patch adds a new features to the endpoint identifier module, 'match_header'. When set, inbound requests are matched by a provided SIP header: value pair. This option works in conjunction with the existing 'match' configuration option, such that if any 'match*' attribute matches an inbound request, the request is associated with the specified endpoint. Since this module now identifies by more than just IP address, appropriate renaming of the module and/or variables can be done in a non-release branch. ASTERISK-26863 #close Change-Id: Icfc14835c962f92e35e67bbdb235cf0589de5453 (cherry picked from commit 30f52d79d7)	8 years ago
Matt Jordan	51985565ef	configs/samples/hep.conf.sample: Clarify how the HEP stack works ... This patch updates the documenation in hep.conf.sample to better specify how the various HEP modules interact. ASTERISK-26717 #close Change-Id: I337fb742a89e3ec5edc7fc7a7a0295218d841124	8 years ago
zuul	071e6d971c	Merge "chan_sip: Call not cancelled after receiving a 422 response" into 13	8 years ago
Matt Jordan	f9b791debe	funcs/func_devstate: Remove new line in Device field of during module load ... During module loading of func_devstate, Asterisk emits the current device state of all Custom device states currently stored in the AstDB. This was erroneously including a new line character ('\n') to the end of the device state, causing two new lines to be emitted in DeviceStateChange AMI events. Note that this only happened for those device state changes that occurred during startup. Regular device state changes for Custom device states are handled elsewhere, and did not have the newline. ASTERISK-26643 #close Reported by: Roman Bedros Tested by: Matt Jordan patches: ami_devstate.diff uploaded by Roman Bedros (License 6842) Change-Id: I1f4c02fc79c448d43bf725f5039c83d9611d7d93	8 years ago
Matt Jordan	216e28aa95	main/stasis_cache: Demote the ERROR message when removing a nonexistent item ... This patch demotes the ERROR message that is displayed when a nonexistent item is removed from the Stasis cache. The genesis of this demotion is due to chan_sip's realtime peers and their interaction with Asterisk's core ast_endpoint code, but ostensibly it could happen from other channel drivers as well. Since Mark Michelson already did an excellent job of explaining on this issue, it is quoted here for posterity: "Internally, when a realtime peer is retrieved, Asterisk creates an ast_endpoint structure. When that peer is destroyed, the ast_endpoint is destroyed as well. Part of the destruction of the ast_endpoint involves clearing the Stasis cache of all information about that endpoint. The problem here is that the act of creating the ast_endpoint is not enough to actually put any information in the Stasis cache. Instead, something has to happen, such as a state change, in order for the Stasis cache to have any information about that endpoint. When a device registers, chan_sip creates an ast_endpoint structure, processes the REGISTER, and then destroys the ast_endpoint. When the ast_endpoint is destroyed, there is nothing to destroy in the Stasis cache, so an error message is emitted. When you use rtcachefriends, ast_endpoint structures persist for the lifetime of the module and so you do not see this error message." ASTERISK-25237 #close Change-Id: I53cebc6b4a897a1ab9564182b75c177780feff70	8 years ago
Joshua Colp	c8d1b915d7	chan_pjsip: Don't assume a session will have a channel. ... When querying for PJSIP specific information using the dialplan function CHANNEL() it is possible that the underlying session will no longer have a channel associated with it. This is most likely to occur when the RTCP HEP module attempts to get the channel name. If this happens then a crash will occur. This change just adds a check that the channel exists on the session before querying it. ASTERISK-26857 Change-Id: I113479cffff6ae64cf8ed089e9e1565223426f01	8 years ago