asterisk

Commit Graph

Author	SHA1	Message	Date
Michael Kuron	6b8d3cb89a	manager: AOC-S support for AOCMessage ASTERISK-21502 Change-Id: I051b778f8c862d3b4794d28f2f3d782316707b08	2 years ago
Mike Bradeen	89a7d30a97	chan_mgcp: Remove deprecated module. Also removes res_pktcops to avoid merge conflicts with ASTERISK~30301. ASTERISK-30299 Change-Id: I41a316d327646a197b6f112f7f637aceb5111b41	2 years ago
Michael Kuron	841107f294	res_pjsip_aoc: New module for sending advice-of-charge with chan_pjsip chan_sip supported sending AOC-D and AOC-E information in SIP INFO messages in an "AOC" header in a format that was originally defined by Snom. In the meantime, ETSI TS 124 647 introduced an XML-based AOC format that is supported by devices from multiple vendors, including Snom phones with firmware >= 8.4.2 (released in 2010). This commit adds a new res_pjsip_aoc module that inserts AOC information into outgoing messages or sends SIP INFO messages as described below. It also fixes a small issue in res_pjsip_session which didn't always call session supplements on outgoing_response. * AOC-S in the 180/183/200 responses to an INVITE request * AOC-S in SIP INFO (if a 200 response has already been sent or if the INVITE was sent by Asterisk) * AOC-D in SIP INFO * AOC-D in the 200 response to a BYE request (if the client hangs up) * AOC-D in a BYE request (if Asterisk hangs up) * AOC-E in the 200 response to a BYE request (if the client hangs up) * AOC-E in a BYE request (if Asterisk hangs up) The specification defines one more, AOC-S in an INVITE request, which is not implemented here because it is not currently possible in Asterisk to have AOC data ready at this point in call setup. Once specifying AOC-S via the dialplan or passing it through from another SIP channel's INVITE is possible, that might be added. The SIP INFO requests are sent out immediately when the AOC indication is received. The others are inserted into an appropriate outgoing message whenever that is ready to be sent. In the latter case, the XML is stored in a channel variable at the time the AOC indication is received. Depending on where the AOC indications are coming from (e.g. PRI or AMI), it may not always be possible to guarantee that the AOC-E is available in time for the BYE. Successfully tested AOC-D and both variants of AOC-E with a Snom D735 running firmware 10.1.127.10. It does not appear to properly support AOC-S however, so that could only be tested by inspecting SIP traces. ASTERISK-21502 #close Reported-by: Matt Jordan <mjordan@digium.com> Change-Id: Iebb7ad0d5f88526bc6629d3a1f9f11665434d333	2 years ago
Naveen Albert	1c5738771d	res_hep: Add support for named capture agents. Adds support for the capture agent name field of the Homer protocol to Asterisk by allowing users to specify a name that will be sent to the HEP server. ASTERISK-30322 #close Change-Id: I6136583017f9dd08daeb8be02f60fb8df4639a2b	2 years ago
Marcel Wagner	97d1613afa	res_pjsip: Fix typo in from_domain documentation This fixes a small typo in the from_domain documentation on the endpoint documentation ASTERISK-30328 #close Change-Id: Ia6f0897c3f5cab899ef2cde6b3ac07265b8beb21	2 years ago
Naveen Albert	e3ea1b88ff	app_if: Adds conditional branch applications Adds the If, ElseIf, Else, ExitIf, and EndIf applications for conditional execution of a block of dialplan, similar to the While, EndWhile, and ExitWhile applications. The appropriate branch is executed at most once if available and may be broken out of while inside. ASTERISK-29497 Change-Id: I3aa3bd35a5add82465c6ee9bd86b64601f0e1f49	2 years ago
Naveen Albert	99cef8461f	res_pjsip_session.c: Map empty extensions in INVITEs to s. Some SIP devices use an empty extension for PLAR functionality. Rather than rejecting these empty extensions, we now use the s extension for such calls to mirror the existing PLAR functionality in Asterisk (e.g. chan_dahdi). ASTERISK-30265 #close Change-Id: I0861a405cd49bbbf532b52f7b47f0e2810832590	2 years ago
Marcel Wagner	af5f3da632	res_pjsip: Update contact_user to point out default Updates the documentation for the 'contact_user' field to point out the default outbound contact if no contact_user is specified 's' ASTERISK-30316 #close Change-Id: I61f24fb9164e4d07e05908a2511805281874c876	2 years ago
Naveen Albert	c3cf0cd388	res_pjsip_header_funcs: Add custom parameter support. Adds support for custom URI and header parameters in the From header in PJSIP. Parameters can be both set and read using this function. ASTERISK-30150 #close Change-Id: Ifb1bc3c512ad5f6faeaebd7817f004a2ecbd6428	2 years ago
Naveen Albert	9e14523ca3	app_voicemail: Fix missing email in msg_create_from_file. msg_create_from_file currently does not dispatch emails, which means that applications using this function, such as MixMonitor, will not trigger notifications to users (only AMI events are sent our currently). This is inconsistent with other ways users can receive voicemail. This is fixed by adding an option that attempts to send an email and falling back to just the notifications as done now if that fails. The existing behavior remains the default. ASTERISK-30283 #close Change-Id: I597cbb9cf971a18d8776172b26ab187dc096a5c7	2 years ago
Joshua C. Colp	52ed64e38a	ari: Destroy body variables in channel create. When passing a JSON body to the 'create' channel route it would be converted into Asterisk variables, but never freed resulting in a memory leak. This change makes it so that the variables are freed in all cases. ASTERISK-30344 Change-Id: I924dbd866a01c6073e2d6fb846ccaa27ef72d49d	2 years ago
Naveen Albert	2b0f87c9fc	res_adsi: Fix major regression caused by media format rearchitecture. The commit that rearchitected media formats, `a2c912e997` (ASTERISK_23114) introduced a regression by improperly translating code in res_adsi.c. In particular, the pointer to the frame buffer was initialized at the top of adsi_careful_send, rather than dynamically updating it for each frame, as is required. This resulted in the first frame being repeatedly sent, rather than advancing through the frames. This corrupted the transmission of the CAS to the CPE, which meant that CPE would never respond with the DTMF acknowledgment, effectively completely breaking ADSI functionality. This issue is now fixed, and ADSI now works properly again. ASTERISK-29793 #close Change-Id: Icdeddf733eda2981c98712d1ac9cddc0db507dbe	2 years ago
Naveen Albert	f37194ecdb	func_presencestate: Fix invalid memory access. When parsing information from AstDB while loading, it is possible that certain pointers are never set, which leads to invalid memory access and then, fatally, invalid free attempts on this memory. We now initialize to NULL to prevent this. ASTERISK-30311 #close Change-Id: I6120681d04fd2c12a9473f35ce95a1f8e74e3929	2 years ago
Naveen Albert	48b5a4def0	sig_analog: Fix no timeout duration. ASTERISK_28702 previously attempted to fix an issue with flash hook hold timing out after just under 17 minutes, when it should have never been timing out. It fixed this by changing 999999 to INT_MAX, but it did so in chan_dahdi, which is the wrong place since ss_thread is now in sig_analog and the one in chan_dahdi is mostly dead code. This fixes this by porting the fix to sig_analog. ASTERISK-30336 #close Change-Id: I05eb69cc0b5319d357842a70bd26ef64d145cb15	2 years ago
Naveen Albert	1da5eb3795	xmldoc: Allow XML docs to be reloaded. The XML docs are currently only loaded on startup with no way to update them during runtime. This makes it impossible to load modules that use ACO/Sorcery (which require documentation) if they are added to the source tree and built while Asterisk is running (e.g. external modules). This adds a CLI command to reload the XML docs during runtime so that documentation can be updated without a full restart of Asterisk. ASTERISK-30289 #close Change-Id: I4f265b0e5517e757c5453a0f241201a5788d3a07	2 years ago
Naveen Albert	9c0fc320ef	rtp_engine.h: Update examples using ast_format_set. This file includes some doxygen comments referencing ast_format_set. This is an obsolete API that was removed years back, but documentation was not fully updated to reflect that. These examples are updated to the current way of doing things (using the format cache). ASTERISK-30327 #close Change-Id: I570f3b8007fa17ba470cc7117f44bfe7c555d2f7	2 years ago
Mike Bradeen	d0140fc7fe	app_osplookup: Remove deprecated module. ASTERISK-30302 Change-Id: I2268189646fa0b587675d8619322818143172474	2 years ago
Mike Bradeen	8d652ab4be	chan_skinny: Remove deprecated module. ASTERISK-30300 Change-Id: I8be11455010b8ec552e62b0719368342e8a1bae9	2 years ago
Naveen Albert	1c8acdb1c0	app_mixmonitor: Add option to use real Caller ID for voicemail. MixMonitor currently uses the Connected Line as the Caller ID for voicemails. This is due to the implementation being written this way for use with Digium phones. However, in general this is not correct for generic usage in the dialplan, and people may need the real Caller ID instead. This adds an option to do that. ASTERISK-30286 #close Change-Id: I3d0ce76dfe75e2a614e0f709ab27acbd2478267c	2 years ago
Mike Bradeen	c59eb7e6d8	manager: prevent file access outside of config dir Add live_dangerously flag to manager and use this flag to determine if a configuation file outside of AST_CONFIG_DIR should be read. ASTERISK-30176 Change-Id: I46b26af4047433b49ae5c8a85cb8cda806a07404 (cherry picked from commit `81f10e847e`)	2 years ago
George Joseph	120aca73ba	pjsip_transport_events: Fix possible use after free on transport It was possible for a module that registered for transport monitor events to pass in a pjsip_transport that had already been freed. This caused pjsip_transport_events to crash when looking up the monitor for the transport. The fix is a two pronged approach. 1. We now increment the reference count on pjsip_transports when we create monitors for them, then decrement the count when the transport is going to be destroyed. 2. There are now APIs to register and unregister monitor callbacks by "transport key" which is a string concatenation of the remote ip address and port. This way the module needing to monitor the transport doesn't have to hold on to the transport object itself to unregister. It just has to save the transport_key. * Added the pjsip_transport reference increment and decrement. * Changed the internal transport monitor container key from the transport->obj_name (which may not be unique anyway) to the transport_key. * Added a helper macro AST_SIP_MAKE_REMOTE_IPADDR_PORT_STR() that fills a buffer with the transport_key using a passed-in pjsip_transport. * Added the following functions: ast_sip_transport_monitor_register_key ast_sip_transport_monitor_register_replace_key ast_sip_transport_monitor_unregister_key and marked their non-key counterparts as deprecated. * Updated res_pjsip_pubsub and res_pjsip_outbound_register to use the new "key" monitor functions. NOTE: res_pjsip_registrar also uses the transport monitor functionality but doesn't have a persistent object other than contact to store a transport key. At this time, it continues to use the non-key monitor functions. ASTERISK-30244 Change-Id: I1a20baf2a8643c272dcf819871d6c395f148f00b (cherry picked from commit `7684c9e907`)	2 years ago
Ben Ford	b515b50c08	pjproject: 2.13 security fixes Backports two security fixes (c4d3498 and 450baca) from pjproject 2.13. ASTERISK-30338 Change-Id: I86fdc003d5d22cb66e7cc6dc3313a8194f27eb69	2 years ago
Naveen Albert	b1d21f7667	pbx_builtins: Allow Answer to return immediately. The Answer application currently waits for up to 500ms for media, even if users specify a different timeout. This adds an option to not wait for media on the channel by doing a raw answer instead. The default 500ms threshold is also documented. ASTERISK-30308 #close Change-Id: Id59cd340c44b8b8b2384c479e17e5123e917cba4	2 years ago
Naveen Albert	67186aad56	chan_dahdi: Allow FXO channels to start immediately. Currently, chan_dahdi will wait for at least one ring before an incoming call can enter the dialplan. This is generally necessary in order to receive the Caller ID spill and/or distinctive ringing detection. However, if neither of these is required, then there is nothing gained by waiting for one ring and this unnecessarily delays call setup. Users can now use immediate=yes to make FXO channels (FXS signaled) begin processing dialplan as soon as Asterisk receives the call. ASTERISK-30305 #close Change-Id: I20818b370b2e4892c7f40c8a8753fa06a81750b5	2 years ago
Maximilian Fridrich	315eb551db	core & res_pjsip: Improve topology change handling. This PR contains two relatively separate changes in channel.c and res_pjsip_session.c which ensure that topology changes are not ignored in cases where they should be handled. For channel.c: The function ast_channel_request_stream_topology_change only triggers a stream topology request change indication, if the channel's topology does not equal the requested topology. However, a channel could be in a state where it is currently "negotiating" a new topology but hasn't updated it yet, so the topology request change would be lost. Channels need to be able to handle such situations internally and stream topology requests should therefore always be passed on. In the case of chan_pjsip for example, it queues a session refresh (re-INVITE) if it is currently in the middle of a transaction or has pending requests (among other reasons). Now, ast_channel_request_stream_topology_change always indicates a stream topology request change even if the requested topology equals the channel's topology. For res_pjsip_session.c: The function resolve_refresh_media_states does not process stream state changes if the delayed active state differs from the current active state. I.e. if the currently active stream state has changed between the time the sip session refresh request was queued and the time it is being processed, the session refresh is ignored. However, res_pjsip_session contains logic that ensures that session refreshes are queued and re-queued correctly if a session refresh is currently not possible. So this check is not necessary and led to some session refreshes being lost. Now, a session refresh is done even if the delayed active state differs from the current active state and it is checked whether the delayed pending state differs from the current active - because that means a refresh is necessary. Further, the unit test of resolve_refresh_media_states was adapted to reflect the new behavior. I.e. the changes to delayed pending are prioritized over the changes to current active because we want to preserve the original intention of the pending state. ASTERISK-30184 Change-Id: Icd0703295271089057717006730b555b9a1d4e5a	2 years ago
Naveen Albert	79562cf1a5	sla: Prevent deadlock and crash due to autoservicing. SLAStation currently autoservices the station channel before creating a thread to actually dial the trunk. This leads to duplicate servicing of the channel which causes assertions, deadlocks, crashes, and moreover not the correct behavior. Removing the autoservice prevents the crash, but if the station hangs up before the trunk answers, the call hangs since the hangup was never serviced on the channel. This is fixed by not autoservicing the channel, but instead servicing it in the thread dialing the trunk, since it is doing so synchronously to begin with. Instead of sleeping for 100ms in a loop, we simply use the channel for timing, and abort if it disappears. The same issue also occurs with SLATrunk when a call is answered, because ast_answer invokes ast_waitfor_nandfds. Thus, we use ast_raw_answer instead which does not cause any conflict and allows the call to be answered normally without thread blocking issues. ASTERISK-29998 #close Change-Id: Icc237d50354b5910000d2305901e86d2c87bb9d8	2 years ago
Jaco Kroon	2cfb3df35d	Build system: Avoid executable stack. Found in res_geolocation, but I believe others may have similar issues, thus not linking to a specific issue. Essentially gcc doesn't mark the stack for being non-executable unless it's compiling the source, this informs ld via gcc to mark the object as not requiring an executable stack (which a binary blob obviously doesn't). ASTERISK-30321 Change-Id: I71bcc2fd1fe0c82a28b3257405d6f2b566fd9bfc Signed-off-by: Jaco Kroon <jaco@uls.co.za>	2 years ago
Naveen Albert	cb1d31bc3e	func_json: Fix memory leak. A memory leak was present in func_json due to using ast_json_free, which just calls ast_free, as opposed to recursively freeing the JSON object as needed. This is now fixed to use the right free functions. ASTERISK-30293 #close Change-Id: I982324dde841dc9147c8d8ad35c8719daf418b49	2 years ago
Naveen Albert	d5c8f60a72	test_json: Remove duplicated static function. Removes the function mkstemp_file and uses ast_file_mkftemp from file.h instead. ASTERISK-30295 #close Change-Id: I7412ec06f88c39ee353bcdb8c976c2fcac546609	2 years ago
Joshua C. Colp	90784b8912	res_agi: Respect "transmit_silence" option for "RECORD FILE". The "RECORD FILE" command in res_agi has its own implementation for actually doing the recording. This has resulted in it not actually obeying the option "transmit_silence" when recording. This change causes it to now send silence if the option is enabled. ASTERISK-30314 Change-Id: Ib3a85601ff35d1b904f836691bad8a4b7e957174	2 years ago
Naveen Albert	6baa420986	file.c: Don't emit warnings on winks. Adds an ignore case for wink since it should pass through with no warning. ASTERISK-30290 #close Change-Id: Ieb7e34daa717357ac5c93efb0059f6c2321f16ad	3 years ago
Naveen Albert	7e1340eb77	app_mixmonitor: Add option to delete files on exit. Adds an option that allows MixMonitor to delete its copy of any recording files before exiting. This can be handy in conjunction with options like m, which copy the file elsewhere, and the original files may no longer be needed. ASTERISK-30284 #close Change-Id: Ida093679c67e300efc154a97b6d8ec0f104e581e	3 years ago
Naveen Albert	5e35862109	translate.c: Prefer better codecs upon translate ties. If multiple codecs are available for the same resource and the translation costs between multiple codecs are the same, ties are currently broken arbitrarily, which means a lower quality codec would be used. This forces Asterisk to explicitly use the higher quality codec, ceteris paribus. ASTERISK-29455 Change-Id: I4b7297e1baca7aac14fe4a3c7538e18e2dbe9fd6	3 years ago
Naveen Albert	80e9e77261	manager: Update ModuleCheck documentation. The ModuleCheck XML documentation falsely claims that the module's version number is returned. This has not been the case since 14, since the version number is not available anymore, but the documentation was not changed at the time. It is now updated to reflect this. ASTERISK-30285 #close Change-Id: Idde2d1205a11f2623fa1ddab192faa3dc4081e91	3 years ago
George Joseph	196f2e1964	runUnittests.sh: Save coredumps to proper directory Fixed the specification of "outputdir" when calling ast_coredumper so the txt files are saved in the correct place. ASTERISK-30282 Change-Id: Ic631cb90c1e4c29d970c982dff45fda5e0eb15b6	3 years ago
Naveen Albert	12d18b0a40	app_stack: Print proper exit location for PBXless channels. When gosub is executed on channels without a PBX, the context, extension, and priority are initialized to the channel driver's default location for that endpoint. As a result, the last Return will restore this location and the Gosub logs will print out bogus information about our exit point. To fix this, on channels that don't have a PBX, the execution location is left intact on the last return if there are no further stack frames left. This allows the correct location to be printed out to the user, rather than the bogus default context. ASTERISK-30076 #close Change-Id: I1d42a99c9aa9e3708d32718863175158a894e414	3 years ago
George Joseph	b6670e2440	chan_rtp: Make usage of ast_rtp_instance_get_local_address clearer unicast_rtp_request() was setting the channel variables like this: pbx_builtin_setvar_helper(chan, "UNICASTRTP_LOCAL_ADDRESS", ast_sockaddr_stringify_addr(&local_address)); ast_rtp_instance_get_local_address(instance, &local_address); pbx_builtin_setvar_helper(chan, "UNICASTRTP_LOCAL_PORT", ast_sockaddr_stringify_port(&local_address)); ...which made it appear that UNICASTRTP_LOCAL_ADDRESS was being set before local_address was set. In fact, the address part of local_address was set earlier in the function, just not the port. This was confusing however so ast_rtp_instance_get_local_address() is now being called before setting UNICASTRTP_LOCAL_ADDRESS. ASTERISK-30281 Change-Id: I872ac49477100f4eb33891d46efc6ca21ec81aa4	3 years ago
Mike Bradeen	b0df75eb09	res_pjsip: prevent crash on websocket disconnect When a websocket (or potentially any stateful connection) is quickly created then destroyed, it is possible that the qualify thread will destroy the transaction before the initialzing thread is finished with it. Depending on the timing, this can cause an assertion within pjsip. To prevent this, ast_send_stateful_response will now create the group lock and add a reference to it before creating the transaction. While this should resolve the crash, there is still the potential that the contact will not be cleaned up properly, see:ASTERISK~29286. As a result, the contact has to 'time out' before it will be removed. ASTERISK-28689 Change-Id: Id050fded2247a04d8f0fc5b8a2cf3e5482cb8cee	3 years ago
Naveen Albert	e0d243396f	tcptls: Prevent crash when freeing OpenSSL errors. write_openssl_error_to_log has been erroneously using ast_free instead of free, which will cause a crash when MALLOC_DEBUG is enabled since the memory was not allocated by Asterisk's memory manager. This changes it to use the actual free function directly to avoid this. ASTERISK-30278 #close Change-Id: Iac8b6468b718075809c45d8ad16b101af21a474d	3 years ago
Igor Goncharovsky	7eaa7b0b95	res_pjsip_outbound_registration: Allow to use multiple proxies for registration Current registration code use pjsip_parse_uri to verify outbound_proxy that is different from the reading this option for the endpoint. This made value with multiple proxies invalid for registration pjsip settings. Removing URI validation helps to use registration through multiple proxies. ASTERISK-30217 #close Change-Id: I064558e66f04b9f3260c46181812a01349761357	3 years ago
Naveen Albert	26283a4d59	tests: Fix compilation errors on 32-bit. Fix compilation errors caused by using size_t instead of uintmax_t and non-portable format specifiers. ASTERISK-30273 #close Change-Id: I363e6057ef84d54b88af80d23ad6147eef9216ee	3 years ago
Henning Westerholt	7b2d3a6411	res_pjsip: return all codecs on a re-INVITE without SDP Currently chan_pjsip on receiving a re-INVITE without SDP will only return the codecs that are previously negotiated and not offering all enabled codecs. This causes interoperability issues with different equipment (e.g. from Cisco) for some of our customers and probably also in other scenarios involving 3PCC infrastructure. According to RFC 3261, section 14.2 we SHOULD return all codecs on a re-INVITE without SDP The PR proposes a new parameter to configure this behaviour: all_codecs_on_empty_reinvite. It includes the code, documentation, alembic migrations, CHANGES file and example configuration additions. ASTERISK-30193 #close Change-Id: I69763708d5039d512f391e296ee8a4d43a1e2148	3 years ago
Naveen Albert	005b6c8d50	res_pjsip_notify: Add option support for AMI. The PJSIP notify CLI commands allow for using "options" configured in pjsip_notify.conf. This allows these same options to be used in AMI actions as well. Additionally, as part of this improvement, some repetitive common code is refactored. ASTERISK-30263 #close Change-Id: Ie4496b322b63b61eaf9672183a959ab99a04b6b5	3 years ago
Naveen Albert	99a4333f20	res_pjsip_logger: Add method-based logging option. Expands the pjsip logger to support the ability to filter by SIP message method. This can make certain types of SIP debugging easier by only logging messages of particular method(s). ASTERISK-30146 #close Co-authored-by: Sean Bright <sean@seanbright.com> Change-Id: I9c8cbb6fc8686ef21190eb42e08bc9a9b147707f	3 years ago
Frederic LE FOLL	54c1fd9829	Dialing API: Cancel a running async thread, may not cancel all calls race condition: ast_dial_join() may not cancel outgoing call, if function is called just after called party answer and before application execution (bit is_running_app not yet set). This fix adds ast_softhangup() calls in addition to existing pthread_kill() when is_running_app is not set. ASTERISK-30258 Change-Id: Idbdd5c15122159661aa8e996a42d5800083131e4	3 years ago
Naveen Albert	e4117d7290	chan_dahdi: Fix unavailable channels returning busy. This fixes dahdi_request to properly set the cause code to CONGESTION instead of BUSY if no channels were actually available. Currently, the cause is erroneously set to busy if the channel itself is found, regardless of its current state. However, if the channel is not available (e.g. T1 down, card not operable, etc.), then the channel itself may not be in a functional state, in which case CHANUNAVAIL is the correct cause to use. This adds a simple check to ensure that busy tone is only returned if a channel is encountered that has an owner, since that is the only possible way that a channel could actually be busy. ASTERISK-30274 #close Change-Id: Iad5870223c081240c925b19df8d6af136953b994	3 years ago
Naveen Albert	f66f77fa4f	res_pjsip_pubsub: Prevent removing subscriptions. pjproject does not provide any mechanism of removing event packages, which means that once a subscription handler is registered, it is effectively permanent. pjproject will assert if the same event package is ever registered again, so currently unloading and loading any Asterisk modules that use subscriptions will cause a crash that is beyond our control. For that reason, we now prevent users from being able to unload these modules, to prevent them from ever being loaded twice. ASTERISK-30264 #close Change-Id: I7fdcb1a5e44d38b7ba10c44259fe98f0ae9bc12c	3 years ago
Naveen Albert	0825d26ad9	say: Don't prepend ampersand erroneously. Some logic in say.c for determining if we need to also add an ampersand for file seperation was faulty, as non-successful files would increment the count, causing a leading ampersand to be added improperly. This is fixed, and a unit test that captures this regression is also added. ASTERISK-30248 #close Change-Id: I02c1d3a11d82fe4ea8b462070cbd1effb5834d2b	3 years ago
Philip Prindeville	b283c8c20f	res_crypto: handle unsafe private key files ASTERISK-30213 #close Change-Id: I4a77143d41615b7c4fc25bb1251c0a9cb87b417a	3 years ago
Mike Bradeen	bb44e3edca	audiohook: add directional awareness Add enum to allow setting optional direction. If set to only one direction, only feed matching-direction frames to the associated slin factory. This prevents mangling the transcoder on non-mixed frames when the READ and WRITE frames would have otherwise required it. Also removes the need to mute or discard the un-wanted frames as they are no longer added in the first place. res_stasis_snoop is changed to use this addition to set direction on audiohook based on spy direction. If no direction is set, the ast_audiohook_init will init this enum to BOTH which maintains existing functionality. ASTERISK-30252 Change-Id: If8716bad334562a5d812be4eeb2a92e4f3be28eb	3 years ago

1 2 3 4 5 ...

33485 Commits (6b8d3cb89aa2aa8d134635ad033dd1cc68662ca1) All Branches Search

33485 Commits (6b8d3cb89aa2aa8d134635ad033dd1cc68662ca1)

All Branches