https://origsvn.digium.com/svn/asterisk/branches/1.4
........
r94790 | russell | 2007-12-26 11:06:26 -0600 (Wed, 26 Dec 2007) | 5 lines
Don't store DTMF BEGIN frames while a channel is in autoservice. It's just
going to make ast_read() do a lot of extra work when the channel comes back
out of autoservice.
(closes issue #11628, patched by me)
........
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@94791 65c4cc65-6c06-0410-ace0-fbb531ad65f3
https://origsvn.digium.com/svn/asterisk/branches/1.4
........
r94767 | tilghman | 2007-12-24 13:36:59 -0600 (Mon, 24 Dec 2007) | 5 lines
Race: we need to wait to queue a NewChannel event until after the channel is
inserted into the channel list. The reason is because some manager users
immediately queue requests from the channel when they see that event and are
confused when Asterisk reports no such channel. (Closes issue #11632)
........
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@94768 65c4cc65-6c06-0410-ace0-fbb531ad65f3
https://origsvn.digium.com/svn/asterisk/branches/1.4
........
r94468 | mmichelson | 2007-12-21 10:49:35 -0600 (Fri, 21 Dec 2007) | 6 lines
Since we are freeing list elements within a list traversal, we need to use the safe
traversal and remove the item from the list before freeing it.
(closes issue 11612, reported by dtyoo)
........
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@94477 65c4cc65-6c06-0410-ace0-fbb531ad65f3
so that paths and filename are writable by asterisk.c without
causing segfaults.
This involves defining the variables as const char *,
and having them point to as static, writable buffer
defined in asterisk.c
On passing, fix some errors in using these variables
in some files in utils/ , and in res/snmp/agent.c
which was redefining a variable without using paths.h
(not applicable to 1.4)
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@94168 65c4cc65-6c06-0410-ace0-fbb531ad65f3
and likely in other places too.
This is quite useful when placing mail/html stuff in config files.
/*!
\brief Convert some C escape sequences (\b\f\n\r\t) into the
equivalent characters.
\brief s The string to be converted (will be modified).
\return The converted string.
*/
char *ast_unescape_c(char *s);
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@93950 65c4cc65-6c06-0410-ace0-fbb531ad65f3
Asterisk goes into a busy loop, the machine will be recoverable. We'd still
need to do a restart to put Asterisk back into high priority mode, but at
least a reboot won't be required. (Closes issue #11559)
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@93804 65c4cc65-6c06-0410-ace0-fbb531ad65f3
https://origsvn.digium.com/svn/asterisk/branches/1.4
........
r93625 | mmichelson | 2007-12-18 11:02:48 -0600 (Tue, 18 Dec 2007) | 6 lines
Rework deadlock avoidance used in ast_write, since it meant that agent channels which were being monitored
had one audio file recorded and one empty audio file saved.
(closes issue #11529, reported by atis patched by me)
........
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@93626 65c4cc65-6c06-0410-ace0-fbb531ad65f3
modified.
This requires casting the strings in asterisk.c when writing to
them, so we do it through a macro to do it consistently.
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@93603 65c4cc65-6c06-0410-ace0-fbb531ad65f3
globally visible.
Document the fact that DEFAULT_TMP_DIR cannot be overridden
from the default configuration (this needs to be fixed, as you
could have a totally different spooldir configured at runtime,
and yet DEFAULT_TMP_DIR keeps the compile-time default).
Remove two unused entries for sounds and images.
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@93581 65c4cc65-6c06-0410-ace0-fbb531ad65f3
https://origsvn.digium.com/svn/asterisk/branches/1.4
........
r93377 | file | 2007-12-17 18:28:09 -0400 (Mon, 17 Dec 2007) | 7 lines
Do not try to access information about a lock when printing out a trylock attempt. It is possible for the lock that it references to no longer be valid. This would have caused segfaults or deadlocks.
(issue #BE-263)
(closes issue #11080)
Reported by: callguy
(closes issue #11100)
Reported by: callguy
........
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@93378 65c4cc65-6c06-0410-ace0-fbb531ad65f3
you need to reload after changes. Thanks YS.
Reported by: ys
Patches:
trunk93163_manager_reload.c.diff uploaded by ys (license 281)
(related to issue #11414)
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@93166 65c4cc65-6c06-0410-ace0-fbb531ad65f3
manager realtime implementation.
If you change accounts in manager.conf, you now need to reload to activate the
changes (deletions, additions). This was not the case with 1.4.
Reported by: ys
Patches:
trunk93163_manager_reload.c.diff uploaded by ys (license 281)
(closes issue #11414)
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@93165 65c4cc65-6c06-0410-ace0-fbb531ad65f3
- Refer to the proper documentation
- Implement separate signalling/media QoS/CoS in many channels using RTP
- Improve warnings and verbose messages
- Deprecate some old settings
Minor modifications by me, a big effort from IgorG.
Thanks!
Reported by: IgorG
Patches:
qoscleanup-89394-4-trunk.patch uploaded by IgorG (license 20)
Tested by: IgorG
(closes issue #11145)
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@93163 65c4cc65-6c06-0410-ace0-fbb531ad65f3
equivalent to the check done by ast_verb, I wrote a macro, VERBOSITY_LEVEL, which does this
check. I did a quick look in the source and used this macro in some places where option_verbose
was used.
I also converted some verbose messages in logger.c to use ast_verb instead of ast_verbose.
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@93042 65c4cc65-6c06-0410-ace0-fbb531ad65f3
https://origsvn.digium.com/svn/asterisk/branches/1.4
(closes issue #10690)
........
r92696 | qwell | 2007-12-12 18:11:09 -0600 (Wed, 12 Dec 2007) | 7 lines
If a typo is found in a config file, we previous continued on with what was already loaded.
We do not want to do this (see bug below for details).
This makes it so that if a [ is found without a ], the entire config will fail, and nothing in it will be loaded.
Issue 10690.
........
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@92697 65c4cc65-6c06-0410-ace0-fbb531ad65f3
get_unaligned functions as const
* In event.c, use get_unaligned_uint32() in a couple of places to fix issues on
architectures that don't allow unaligned access
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@92305 65c4cc65-6c06-0410-ace0-fbb531ad65f3
https://origsvn.digium.com/svn/asterisk/branches/1.4
........
r92204 | file | 2007-12-10 12:36:15 -0400 (Mon, 10 Dec 2007) | 6 lines
Add G729A as another possible payload name for G729. Some devices use this instead of G729, which is perfectly normal since the payload number itself is defined and can't be used by anything else so the name doesn't matter that much.
(closes issue #11483)
Reported by: revolution
Patches:
rtp.diff uploaded by revolution (license 346)
........
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@92205 65c4cc65-6c06-0410-ace0-fbb531ad65f3
https://origsvn.digium.com/svn/asterisk/branches/1.4
........
r91830 | russell | 2007-12-07 15:24:33 -0600 (Fri, 07 Dec 2007) | 5 lines
Make the lock protecting each thread's list of locks it currently holds
recursive. I think that this will fix the situation where some people have
said that "core show locks" locks up the CLI.
(related to issue #11080)
........
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@91831 65c4cc65-6c06-0410-ace0-fbb531ad65f3
https://origsvn.digium.com/svn/asterisk/branches/1.4
........
r91777 | russell | 2007-12-07 10:08:35 -0600 (Fri, 07 Dec 2007) | 6 lines
* Add a bit more of a verbose comment as to why a hangup frame needs to be
queued up if autoservice gets a NULL return from ast_read().
* Make the process of queueing the hangup frame more efficient by putting the
frame where it is going to end up and avoiding some locking and extra memory
allocations and freeing.
........
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@91778 65c4cc65-6c06-0410-ace0-fbb531ad65f3
https://origsvn.digium.com/svn/asterisk/branches/1.4
........
r91737 | mmichelson | 2007-12-07 09:39:58 -0600 (Fri, 07 Dec 2007) | 7 lines
Hangups that happen during autoservice were not processed appropriately. This is
because a hangup actually causes a NULL frame to be received, not a hangup frame.
Queueing a hangup if we receive a NULL frame during autoservice corrects this problem
(closes issue #11467, reported by jmls, patched by me)
........
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@91738 65c4cc65-6c06-0410-ace0-fbb531ad65f3
https://origsvn.digium.com/svn/asterisk/branches/1.4
........
r91450 | file | 2007-12-06 12:49:42 -0400 (Thu, 06 Dec 2007) | 6 lines
Fix various in the udptl implementation. It could return empty modem frames, have an incorrect sequence number on packets, and display the wrong sequence number in the debug messages.
(closes issue #11228)
Reported by: Cache
Patches:
udptl-4.patch uploaded by dimas (license 88)
........
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@91458 65c4cc65-6c06-0410-ace0-fbb531ad65f3
- Now use Response: success
- New header "Ping: pong" :-)
- The Events action
- Now use Response: Success
- The new status is reported as "Events: On" or "Events: Off"
- Report if manager is enabled in the reload event
Small cleanups...
From moremanager
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@91420 65c4cc65-6c06-0410-ace0-fbb531ad65f3
- Newstate event
- Now has "CalleridNum" for numeric caller id, like Newchannel
- The event does not send "<unknown>" for unknown caller IDs just an empty field
- Newstate and Newchannel events
- these have changed headers
"State" -> ChannelStateDesc Text based channel state
-> ChannelState Numeric channel state
- The events does not send "<unknown>" for unknown caller IDs just an empty field
- Newstate event
- Now has "CalleridNum" for numeric caller id, like Newchannel
- The event does not send "<unknown>" for unknown caller IDs just an empty field
- Link and Unlink events
- The "Link" and "Unlink" bridge events in channel.c are now renamed to "Bridge"
- The link state is in the bridgestate: header as "Link" or "Unlink"
- For channel.c bridges, "Bridgetype: core" is added. This opens up for
bridge events in rtp.c and channel drivers
- The "Rename" manager event has a renamed header, to use the same
terminology for the current channel as other events
- Oldname -> Channel
(Moremanager)
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@91409 65c4cc65-6c06-0410-ace0-fbb531ad65f3
Maybe belongs in the new cdr category?
---moremanager---
Event: NewAccountCode
Modules: cdr.c
Purpose: To report a change in account code for a live channel
Example:
Event: NewAccountCode
Privilege: call,all
Channel: SIP/olle-01844600
Uniqueid: 1177530895.2
AccountCode: Stinas account 1234848484
OldAccountCode: Olles Account 12345
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@91408 65c4cc65-6c06-0410-ace0-fbb531ad65f3
Thanks, eliel, for writing the original patch. Modified by me to follow
other manager events and the new "moremanager" style.
(closes issue #11478)
Reported by: eliel
Patches:
manager.c.patch uploaded by eliel (license 64)
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@91347 65c4cc65-6c06-0410-ace0-fbb531ad65f3
https://origsvn.digium.com/svn/asterisk/branches/1.4
........
r91192 | russell | 2007-12-05 11:31:42 -0600 (Wed, 05 Dec 2007) | 10 lines
Make the lock in the threadstorage debugging code untracked to avoid a deadlock
on thread destruction.
(closes issue #11207)
Reported by: ys
Patches:
threadstorage.c.diff uploaded by ys (license 281)
Also fixes an open bug report: (closes issue #11446)
........
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@91197 65c4cc65-6c06-0410-ace0-fbb531ad65f3
https://origsvn.digium.com/svn/asterisk/branches/1.4
........
r91074 | russell | 2007-12-04 18:48:47 -0600 (Tue, 04 Dec 2007) | 4 lines
When DEBUG_THREADS is enabled, we only have the details about who is holding
a lock that we are waiting on for a mutex, not rwlocks. This should fix the
problem where people have reported "core show locks" crashing sometimes.
........
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@91077 65c4cc65-6c06-0410-ace0-fbb531ad65f3
https://origsvn.digium.com/svn/asterisk/branches/1.4
........
r90967 | russell | 2007-12-04 13:57:39 -0600 (Tue, 04 Dec 2007) | 7 lines
Make some changes to some additions I made recently for doing channel autoservice
when looking up extensions. This code was added to handle the case where a
dialplan switch was in use that could block for a long time. However, the way
that I added it, it did this for all extension lookups. However, lookups in the
in-memory tree of extensions should _not_ take long enough to matter. So, move
the autoservice stuff to be only around executing a switch.
........
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@91011 65c4cc65-6c06-0410-ace0-fbb531ad65f3
This introduces two new options for zapata.conf: mwimonitor and mwimonitornotify.
The mwimonitor option enables MWI monitoring. When the MWI state on a line changes,
then the script specified by mwimonitornotify will be executed for custom handling
of the state change, similar to the externnotify option of voicemail.conf.
Also, when the MWI state on an FXO line changes, an internal Asterisk event is
generated to indicate the new state of the associated mailbox. That may, any
module that cares about MWI information will get notified and can handle it
just as if app_voicemail had sent this notification.
(BE-253, original patch from markster, with some minor modifications by me to
add comments, documentation, and internal event support)
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@90949 65c4cc65-6c06-0410-ace0-fbb531ad65f3
https://origsvn.digium.com/svn/asterisk/branches/1.4
........
r90735 | mmichelson | 2007-12-03 17:12:17 -0600 (Mon, 03 Dec 2007) | 22 lines
A big one...
This is the merge of the forward-loop branch. The main change here is that call-forwards can no longer loop.
This is accomplished by creating a datastore on the calling channel which has a linked list of all devices
dialed. If a forward happens, then the local channel which is created inherits the datastore. If, through this
progression of forwards and datastore inheritance, a device is attempted to be dialed a second time, it will simply
be skipped and a warning message will be printed to the CLI. After the dialing has been completed, the datastore
is detached from the channel and destroyed.
This change also introduces some side effects to the code which I shall enumerate here:
1. Datastore inheritance has been backported from trunk into 1.4
2. A large chunk of code has been removed from app_dial. This chunk is the section of code
which handles the call forward case after the channel has been requested but before it has
been called. This was removed because call-forwarding still works fine without it, it makes the
code less error-prone should it need changing, and it made this set of changes much less painful
to just have the forwarding handled in one place in each module.
3. Two new files, global_datastores.h and .c have been added. These are necessary since the datastore
which is attached to the channel may be created and attached in either app_dial or app_queue, so they
need a common place to find the datastore info. This approach was taken in case similar datastores are
needed in the future, there will be a common place to add them.
........
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@90873 65c4cc65-6c06-0410-ace0-fbb531ad65f3
https://origsvn.digium.com/svn/asterisk/branches/1.4
........
r90432 | tilghman | 2007-12-02 03:34:23 -0600 (Sun, 02 Dec 2007) | 7 lines
Clarify the return value on autoservice. Specifically, if you started
autoservice and autoservice was already on, it would erroneously return an
error.
Reported by: adiemus
Patch by: dimas
(Closes issue #11433)
........
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@90433 65c4cc65-6c06-0410-ace0-fbb531ad65f3
This works in much the same way as the automonitor, except that instead of using the monitor
app, it uses the mixmonitor app. By providing an 'x' or 'X' as a dial or queue option, a DTMF
sequence may be entered (as defined in features.conf) to start the one-touch mixmonitor.
This patch also introduces some new API calls to the audiohooks code for searching for an audiohook
by type and for searching for a running audiohook by type.
Big thanks to joetester for writing the initial patch, testing it and patiently waiting for it to
be committed.
(closes issue #10185, reported and patched by xmarksthespot)
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@90388 65c4cc65-6c06-0410-ace0-fbb531ad65f3
https://origsvn.digium.com/svn/asterisk/branches/1.4
........
r90348 | russell | 2007-11-30 13:26:04 -0600 (Fri, 30 Nov 2007) | 8 lines
Change the behavior of ao2_link(). Previously, in inherited a reference.
Now, it automatically increases the reference count to reflect the reference
that is now held by the container.
This was done to be more consistent with ao2_unlink(), which automatically
releases the reference held by the container. It also makes it so it is
no longer possible for a pointer to be invalid after ao2_link() returns.
........
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@90351 65c4cc65-6c06-0410-ace0-fbb531ad65f3
https://origsvn.digium.com/svn/asterisk/branches/1.4
........
r90145 | russell | 2007-11-28 18:20:34 -0600 (Wed, 28 Nov 2007) | 5 lines
This set of changes is to make some callerID handling thread-safe.
The ast_set_callerid() function needed to lock the channel. Also, the handlers
for the CALLERID() dialplan function needed to lock the channel when reading
or writing callerid values directly on the channel structure.
........
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@90146 65c4cc65-6c06-0410-ace0-fbb531ad65f3
https://origsvn.digium.com/svn/asterisk/branches/1.4
........
r90059 | mmichelson | 2007-11-28 16:08:50 -0600 (Wed, 28 Nov 2007) | 13 lines
Removing some seemingly pointless code. This sets a channel variable for every priority
executed in the dialplan if you have debug set to anything non-zero. This seems pointless
due to the fact that these channel variables are not referenced anywhere else in the code and
their names are esoteric enough that they would not be practical to reference in the dialplan. Plus
the fact that this behavior isn't documented anywhere means that the change is not likely to cause
any disruption. If anything, this may actually cause a slight performance increase if running with
debug on.
The motivating influence for this code change is the eventwhencalled option for queues. If set to
vars, all channel variables will be output to the manager. These unnecessary channel variables make
the output a lot more difficult to deal with.
........
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@90060 65c4cc65-6c06-0410-ace0-fbb531ad65f3
https://origsvn.digium.com/svn/asterisk/branches/1.4
........
r89893 | russell | 2007-11-27 18:20:13 -0600 (Tue, 27 Nov 2007) | 4 lines
- update documentation for some of the goto functions to note that they
handle locking the channel as needed
- update ast_explicit_goto() to lock the channel as needed
........
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@89915 65c4cc65-6c06-0410-ace0-fbb531ad65f3
https://origsvn.digium.com/svn/asterisk/branches/1.4
........
r89790 | russell | 2007-11-27 15:45:51 -0600 (Tue, 27 Nov 2007) | 41 lines
Merge changes from team/russell/autoservice_1.4
This set of changes fixes an issue that was reported to me on IRC yesterday.
The user, d1mas, was using chan_zap for incoming calls and was having DTMF
recognition issues in some situations. Specifically, he noticed that the
problem occurred when using DISA or WaitExten. He also noticed that when
using Read, the problem did not occur. His system also used DUNDi for
dialplan lookups.
So, he theorized that if the DUNDi lookups blocked for some period of time,
that audio from the zap channel could get lost. If the audio got lost, then
it wouldn't be run through the DTMF detector, and digits could get lost.
He was correct, and the following set of changes fixes the problem. However,
the changes go a little bit further than what was necessary to fix this exact
problem.
1) I updated pbx_extension_helper() to autoservice the associated channel to
handle cases where extension lookups may take a long time. This would
normally be a dialplan switch that does some lookup over the network, such
as the DUNDi or IAX2 switches.
This ensures that even while a DUNDi lookup is blocking, the channel will be
continuously serviced.
2) I made a change to the autoservice code. This is actually something that
has bothered me for a long time. When a channel is in autoservice, _all_
frames get thrown away. However, some frames really shouldn't be thrown
away. The most notable examples are signalling (CONTROL) frames, and DTMF.
So, this patch queues up important frames while a channel is in autoservice.
When autoservice is stopped on the channel, the queued up frames get stuck
back on the channel so that they can get processed instead of thrown away.
3) I made another change to the autoservice code to handle the case where
autoservice is started on channels recursively.
Previously, you could call ast_autoservice_start() multiple times on a
channel, and it would stop the first time ast_autoservice_stop() gets
called. Now, it will ensure that autoservice doesn't actually stop until
the final call to ast_autoservice_stop().
........
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@89791 65c4cc65-6c06-0410-ace0-fbb531ad65f3
https://origsvn.digium.com/svn/asterisk/branches/1.4
........
r89709 | kpfleming | 2007-11-27 14:16:56 -0600 (Tue, 27 Nov 2007) | 2 lines
on second thought... revert all the other changes i've made in app options parsing leaving only one: if an empty argument is supplied for an option, set that argument pointer to point to an empty string rather than NULL, so that the application can do normal checks on it without worrying about it being NULL
........
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@89721 65c4cc65-6c06-0410-ace0-fbb531ad65f3
Also by accident fixed a bad typo by a previous committer, which actually made video calls
not work fully...
Merged revisions 89630 via svnmerge from
https://origsvn.digium.com/svn/asterisk/branches/1.4
........
r89630 | oej | 2007-11-27 16:23:17 +0100 (Tis, 27 Nov 2007) | 12 lines
If we get a codec offer using a well-known payload type, but using it for another
codec that we don't know, Asterisk did not remove that codec from the list.
With this patch, we remove the codec from audio and video rtp objects and
deny it ever existed. Thanks to lasse for testing.
(closes issue #11376)
Reported by: lasse
Patches:
bug11376.txt uploaded by oej (license 306)
Tested by: lasse
........
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@89698 65c4cc65-6c06-0410-ace0-fbb531ad65f3
https://origsvn.digium.com/svn/asterisk/branches/1.4
........
r89622 | murf | 2007-11-26 23:24:02 -0700 (Mon, 26 Nov 2007) | 1 line
closes issue #11379; OK, this is an attempt to make both sides happy. To the cdr.conf file, I added the option 'unanswered', which defaults to 'no'. In this mode, you will see a cdr for a call, whether it was answered or not. The disposition will be NO ANSWER or ANSWERED, as appropriate. The src is as you'd expect, the destination channel will be one of the channels from the Dial() call, usually the last in the list if more than one chan was specified. With unanswered set to 'yes', you will still see this cdr entry in both cases. But in the case where the dial timed out, you will also see a cdr for each line attempted, marked NO ANSWER, with no destination channel name. The new option defaults to 'no', so you don't see the pesky extra cdr's by default, and you will not see the irritating 'not posted' messages.
........
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@89623 65c4cc65-6c06-0410-ace0-fbb531ad65f3
https://origsvn.digium.com/svn/asterisk/branches/1.4
........
r89610 | file | 2007-11-26 17:10:29 -0400 (Mon, 26 Nov 2007) | 2 lines
Fix issues with async dialing with an application executing. The application has to be terminated and control returned to the thread before hanging things up. (issue #BE-252)
........
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@89612 65c4cc65-6c06-0410-ace0-fbb531ad65f3
- Restructure other changes to UPGRADE.txt and CHANGES
We're still looking for scripts that replace
asterisk -rx "show shannels concise"
by using the manager interface, but still produces the same output.
Anyone?
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@89606 65c4cc65-6c06-0410-ace0-fbb531ad65f3
https://origsvn.digium.com/svn/asterisk/branches/1.4
........
r89577 | file | 2007-11-26 11:34:38 -0400 (Mon, 26 Nov 2007) | 6 lines
If channel allocation fails because the alert pipe could not be created also free the scheduler context.
(closes issue #11355)
Reported by: eliel
Patches:
main.channel.c.patch uploaded by eliel (license 64)
........
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@89578 65c4cc65-6c06-0410-ace0-fbb531ad65f3
https://origsvn.digium.com/svn/asterisk/branches/1.4
........
r89540 | tilghman | 2007-11-24 00:19:23 -0600 (Sat, 24 Nov 2007) | 9 lines
Currently, zero-length voicemail messages cause a hangup in VoicemailMain.
This change fixes the problem, with a multi-faceted approach. First, we
do our best to avoid these messages from being created in the first place,
and second, if that fails, we detect when the voicemail message is
zero-length and avoid exiting at that point.
Reported by: dtyoo
Patch by: gkloepfer,tilghman
(Closes issue #11083)
........
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@89541 65c4cc65-6c06-0410-ace0-fbb531ad65f3
https://origsvn.digium.com/svn/asterisk/branches/1.4
........
r89536 | tilghman | 2007-11-23 11:18:26 -0600 (Fri, 23 Nov 2007) | 10 lines
Up until this point, the XML output of the manager has been technically
invalid, due to the repetition of certain parameters in a single event.
This caused various issues for XML parsers, some of which refused to parse
at all, given the invalidity of the rendered XML. So this commit fixes
the XML output, ensuring that each entity parameter has a unique name, thus
ensuring valid XML.
Reported by: msetim
Patch by: tilghman
(Closes issue #10220)
........
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@89537 65c4cc65-6c06-0410-ace0-fbb531ad65f3
only do the calculations if fax detection is enabled on the dsp.
(closes issue #11331)
Reported by: dimas
Patches:
dsp.patch uploaded by dimas (license 88)
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@89490 65c4cc65-6c06-0410-ace0-fbb531ad65f3
would return LONG_MIN (1 in 9 quintillion if using 64-bit longs). Since there
is no positive equivalent of LONG_MIN, the result of labs() in this case is
unpredictable. This fixes that situation.
(closes issue #11336, reported and patched by sperreault)
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@89487 65c4cc65-6c06-0410-ace0-fbb531ad65f3
Unfortunately, since trunk uses read/write locks for the context lock, it means that I have
actually *introduced* a deadlock condition since they are not recursive. Removing this change
for now and will look into introducing a different one.
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@89483 65c4cc65-6c06-0410-ace0-fbb531ad65f3
https://origsvn.digium.com/svn/asterisk/branches/1.4
........
r89457 | mmichelson | 2007-11-20 11:50:31 -0600 (Tue, 20 Nov 2007) | 9 lines
According to comments in main/pbx.c, it is essential that if we are going to lock
the conlock as well as the hints lock, it must be locked in that respective order.
In order to prevent a potential deadlock, we need to lock the conlock prior to
locking the hints lock in ast_hint_state_changed (see the call stack example on
issue #11323 for how this can happen).
(closes issue #11323, reported by eelcob, suggestion for patch by eelcob, patch by me)
........
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@89458 65c4cc65-6c06-0410-ace0-fbb531ad65f3
This is only to complete the build, clearly the linker
behaviour will be completely different and likely to
cause trouble in those cases.
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@89367 65c4cc65-6c06-0410-ace0-fbb531ad65f3
build times - tested, there is no measureable difference before and
after this commit.
In this change:
use asterisk/compat.h to include a small set of system headers:
inttypes.h, unistd.h, stddef.h, stddint.h, sys/types.h, stdarg.h,
stdlib.h, alloca.h, stdio.h
Where available, the inclusion is conditional on HAVE_FOO_H as determined
by autoconf.
Normally, source files should not include any of the above system headers,
and instead use either "asterisk.h" or "asterisk/compat.h" which does it
better.
For the time being I have left alone second-level directories
(main/db1-ast, etc.).
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@89333 65c4cc65-6c06-0410-ace0-fbb531ad65f3
https://origsvn.digium.com/svn/asterisk/branches/1.4
........
r89325 | kpfleming | 2007-11-16 10:47:46 -0600 (Fri, 16 Nov 2007) | 4 lines
To help combat problems where people build external modules (asterisk-addons or others) and then change the build options of the Asterisk build in a way that makes the incompatible without warning, this commit introduces an MD5 signature of the important build-time options and includes that signature into modules when they are built. When the loader loads one of these modules and notices the problem, it will emit a warning to console and refuse to initialize the module, as doing so could cause the system to be unstable or even crash.
If you upgrade to this version of Asterisk, you must rebuild *all* of your modules that came from other sources before trying to run this version. If you are using Digium's G.729 binary codec module, you will need v33 or newer.
........
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@89326 65c4cc65-6c06-0410-ace0-fbb531ad65f3
through ast_mutex primitives.
To detect all occurrences, I have renamed the lock field in struct ast_channel
so it is clear that it shouldn't be used directly.
There are some uses in res/res_features.c (see details of the diff)
that are error prone as they try and lock two channels without
caring about the order (or without explaining why it is safe).
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@89293 65c4cc65-6c06-0410-ace0-fbb531ad65f3
This prevents modifying the strings in the stored variables,
and catched a few instances where this was actually done.
Given the differences between trunk and 1.4 (and the fact that this
is effectively an API change) it is better to fix 1.4 independently.
These are
chan_sip.c::sip_register()
chan_skinny.c:: near line 2847
config.c:: near line 1774
logger.c::make_components()
res_adsi.c:: near line 1049
I may have missed some instances for modules that do not build here.
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@89268 65c4cc65-6c06-0410-ace0-fbb531ad65f3
- handle memory allocation failures
- add an ast_ prefix to a publicly exported function
- put curly braces in the right places
- add a bunch of spaces where they should be be used
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@89266 65c4cc65-6c06-0410-ace0-fbb531ad65f3
- move a verbose message to after the item is added to the list
- make use of the ARRAY_LEN macro in one spot
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@89258 65c4cc65-6c06-0410-ace0-fbb531ad65f3
https://origsvn.digium.com/svn/asterisk/branches/1.4
........
r89239 | tilghman | 2007-11-13 07:51:53 -0600 (Tue, 13 Nov 2007) | 4 lines
Debugging is running into the 16-lock limit. Increase to avoid.
(This define is only effective when debugging is turned on, so there's
no effect for most installations.)
........
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@89240 65c4cc65-6c06-0410-ace0-fbb531ad65f3
Also fix a common typo I kept seeing (arguement) in various files.
Closes issue #11222, patch by snuffy (with arguement > argument by me).
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@89202 65c4cc65-6c06-0410-ace0-fbb531ad65f3
- the *_CURRENT macros no longer need the list head pointer argument
- add AST_LIST_MOVE_CURRENT to encapsulate the remove/add operation when moving entries between lists
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@89106 65c4cc65-6c06-0410-ace0-fbb531ad65f3
- Remove the AST_FORMAT_MAX_* types, as these are consuming 3 out of our available 32 bits.
- Add a native slin16 type, so that 16kHz codecs can translate without losing resolution.
(This doesn't affect anything immediately, until another codec has wb support.)
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@89071 65c4cc65-6c06-0410-ace0-fbb531ad65f3
https://origsvn.digium.com/svn/asterisk/branches/1.4
........
r89036 | murf | 2007-11-06 10:52:50 -0700 (Tue, 06 Nov 2007) | 1 line
closes issue #8786 - where the [catname](!) and [catname](othercat1,othercat2,...) notation gets dropped across a ConfigUpdate (or any other thing that would cause a config file to be written). While I was at it, I also cleaned up some of the destroy routines to free up comments, which was not being done. Made sure the new struct I introduced is also cleaned up properly at destruction time. My code handles multiple template inclusions. Many thanks to ssokol for his patch, which, while not literally used in the final merge, served as a foundation for the fix.
........
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@89062 65c4cc65-6c06-0410-ace0-fbb531ad65f3
of the current memory allocations when you start Asterisk, when the command's
handler gets called for initialization.
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@89052 65c4cc65-6c06-0410-ace0-fbb531ad65f3
the constructor for the list of modules was run
after the constructors for the embedded modules
(which appended entries to the list).
As a result, the list appeared empty when it was
time to use it.
On linux the order of execution of constructor
was evidently different (it may depend on the
ordering of modules in the ELF file).
This is only a workaround - there may be other
situations where the execution of constructors
causes problems, so if we manage to find a more
general solution this workaround can go away.
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@89031 65c4cc65-6c06-0410-ace0-fbb531ad65f3
https://origsvn.digium.com/svn/asterisk/branches/1.4
........
r88805 | russell | 2007-11-05 16:07:54 -0600 (Mon, 05 Nov 2007) | 12 lines
After seeing crashes related to channel variables, I went looking around at the
ways that channel variables are handled. In general, they were not handled in
a thread-safe way. The channel _must_ be locked when reading or writing from/to
the channel variable list.
What I have done to improve this situation is to make pbx_builtin_setvar_helper()
and friends lock the channel when doing their thing. Asterisk API calls almost
all lock the channel for you as necessary, but this family of functions did not.
(closes issue #10923, reported by atis)
(closes issue #11159, reported by 850t)
........
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@88934 65c4cc65-6c06-0410-ace0-fbb531ad65f3
namely main/Makefile .
I am unclear where decisions on the build environment (CFLAGS,
LDFLAGS, LIBS and so on) should be made - right now they are
split here and there.
As a first step in cleaning up this situation, i am trying to at
least collect all instances of each variable in one place.
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@88767 65c4cc65-6c06-0410-ace0-fbb531ad65f3
https://origsvn.digium.com/svn/asterisk/branches/1.4
........
r88719 | russell | 2007-11-05 14:40:01 -0600 (Mon, 05 Nov 2007) | 7 lines
Merge changes from asterisk/team/kpfleming/SRV-priority-handling
Previously, the SRV record support in Asterisk was broken. There was no
guarantee on what record Asterisk would choose to actually use. This set of
changes improves the situation by ensuring that Asterisk will choose the
highest priority record.
........
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@88740 65c4cc65-6c06-0410-ace0-fbb531ad65f3
https://origsvn.digium.com/svn/asterisk/branches/1.4
........
r88709 | russell | 2007-11-05 14:11:04 -0600 (Mon, 05 Nov 2007) | 20 lines
Merge the last bit of changes from asterisk/team/russell/readq-1.4
The issue here is that the channel frame readq handling got broken when the
code was converted to use the linked list macros. It caused corruption of the
list head and tail pointers. So, I fixed up the usage of the linked list
macros and in passing, simplified the code. I also documented what the code
is doing, as it was a bit difficult to figure out at first.
This bug showed itself with crashes showing messed up head/tail pointers for
the readq. However, there are a couple of crashes that aren't quite as obvious,
but I think may be related. So, if your bug gets closed by this commit, but
you still have a problem, please reopen or create a new bug report.
(closes issue #10936)
(closes issue #10595)
(closes issue #10368)
(closes issue #11084)
(closes issue #10040)
(closes issue #10840)
........
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@88710 65c4cc65-6c06-0410-ace0-fbb531ad65f3
https://origsvn.digium.com/svn/asterisk/branches/1.4
........
r88624 | russell | 2007-11-05 11:46:02 -0600 (Mon, 05 Nov 2007) | 5 lines
Fix up datastore handling in ast_do_masquerade(). The code is intended to move
any channel datastores from the old channel to the new one. However, it did
not use the linked list macros properly to accomplish the task. The existing
code would only work if there was only a single datastore on the old channel.
........
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@88651 65c4cc65-6c06-0410-ace0-fbb531ad65f3
details and examples are in include/asterisk/stringfields.h.
Not applicable to older branches except for 1.4 which will
receive a fix for the routines that free memory pools.
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@88454 65c4cc65-6c06-0410-ace0-fbb531ad65f3
https://origsvn.digium.com/svn/asterisk/branches/1.4
(closes issue #11147)
........
r88283 | qwell | 2007-11-02 11:51:08 -0500 (Fri, 02 Nov 2007) | 4 lines
We need to make sure to specify a language to ast_fileexists, otherwise it may fail for anything besides en
Issue 11147, fix discovered by both citats and myself (independently), with input from Corydon76
........
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@88284 65c4cc65-6c06-0410-ace0-fbb531ad65f3
https://origsvn.digium.com/svn/asterisk/branches/1.4
........
r87373 | russell | 2007-10-29 14:21:06 -0500 (Mon, 29 Oct 2007) | 5 lines
Remove a lock that doesn't make any sense. The regions lock needs to be held
when traversing the list of allocated chunks so that they can be printed out
to the CLI.
(Thanks to eliel on #asterisk-dev for pointing this out!)
........
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@87392 65c4cc65-6c06-0410-ace0-fbb531ad65f3
https://origsvn.digium.com/svn/asterisk/branches/1.4
........
r86750 | russell | 2007-10-22 10:52:48 -0500 (Mon, 22 Oct 2007) | 8 lines
Don't leak a frame in the case that an END frame is received and the time since
the BEGIN is less than that of the defined minimum DTMF duration.
(closes issue #11051)
Reported by: casper
Patches:
channel.c.86664.diff uploaded by casper (license 55)
........
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@86751 65c4cc65-6c06-0410-ace0-fbb531ad65f3
Russell Bryant
Mark Michelson
Tilghman Lesher
Luigi Rizzo
Olle Johansson
Jason Parker
Joshua Colp
Steve Murphy
Kevin P. Fleming
James Golovich