Quote from review board:
This patch extends the extension state callbacks so that monitoring channels
(as chan_sip) get more information of the devices which are responsible for
an extension state change. The additional information is needed by chan_sip
to present names/numbers of the caller and callee in an early-state SIP
notification. Users of extenstion state callback not interested in the
additional information are not affected by the changes.
Motivation: to present the involved party's name/number in an early-state
nofification (used by the notified device as a pickup offer) one after another
so that a user can see which call he will pick up in an undirected pickup.
Such a pickup offer to a user shall indicate the same call (number/name-A calls
number/name-B) as the call which would be picked up when an undirected pickup
is executed.
Users interested in additional state info must use the new functions
ast_extension_state_add_extended() resp.
ast_extension_state_add_destroy_extended() to register an extended state
callback. When the callback is registered this way, an extra member
device_state_info of struct ast_state_cb_info is passed to the callback in
addition to the aggregated extension state. This container holds an object for
every device of the monitored extension hint consisting of the device name, the
device state and a channel reference to the channel which (presumably) caused
the device state.
The information is used by chan_sip for early-state notifications. When the
state of a device changes and the new state contains AST_EVENT_RINGING, an
early-state notification is sent to the subscribed devices with the
caller/callee names/numbers of the oldest ringing channel of the monitored
extension. The notified user may then invoke a direct pickup, which will pickup
exactly this channel.
Users of the old non-extended callbacks will only be called when the aggregated
state did change (same behavior as before). Users of the extended callback will
also be called when the state is unchanged but does contain AST_EVENT_RINGING.
That could be the case if two channels are ringing at one device and one of
them hangs up, so the aggregated state does not change. This way the monitoring
channel can create a new early-state notification with the now ringing
party-ids.
Review: https://reviewboard.asterisk.org/r/2048
This contribution comes from Guenther Kelleter
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@370979 65c4cc65-6c06-0410-ace0-fbb531ad65f3
Debugging messages and associated controls only compiled in if configured with --enable-dev-mode. Debug messages provide more detail (including thread id) and are grouped so the user/dev can limit the type of messages displayed. Functionally no real change to chan_skinny.
Review: https://reviewboard.asterisk.org/r/2040/
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@370881 65c4cc65-6c06-0410-ace0-fbb531ad65f3
This patch adds named calledgroups/pickupgroups to Asterisk. Named groups are
implemented in parallel to the existing numbered callgroup/pickupgroup
implementation. However, unlike the existing implementation, which is limited
to a maximum of 64 defined groups, the number of defined groups allowed for
named callgroups/pickupgroups is effectively unlimited.
Named groups are configured with the keywords "namedcallgroup" and
"namedpickupgroup". This corresponds to the numbered group definitions of
"callgroup" and "pickupgroup". Note that as the implementation of named groups
coexists with the existing numbered implementation, a defined named group of
"4" does not equate to numbered group 4.
Support for the named groups has been added to the SIP, DAHDI, and mISDN channel
drivers.
Review: https://reviewboard.asterisk.org/r/2043
Uploaded by:
Guenther Kelleter(license #6372)
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@370831 65c4cc65-6c06-0410-ace0-fbb531ad65f3
........
r370769 | mmichelson | 2012-08-03 16:35:00 -0500 (Fri, 03 Aug 2012) | 24 lines
Fix error in the "IPorHost" section of a SIP dialstring.
This is based on the review request posted by Walter Doekes
(referenced lower in the commit message)
The main fix here is to treat the IPorHost portion of the dial
string as a temporary outbound proxy. This ensures requests
get sent to the proper location.
Due to the age of the request, some parts were no longer relevant.
For instance, the request moved outbound proxy parsing code into
a single method. This is done in a previous commit, so it was not
necessary to do again.
Also, the review request fixed some errors with regards to request
routing for CANCEL and ACK requests. This has also been fixed in
more recent commits.
(closes issue ASTERISK-19677)
reported by Walter Doekes
Review https://reviewboard.asterisk.org/r/1859
........
r370770 | mmichelson | 2012-08-03 16:39:35 -0500 (Fri, 03 Aug 2012) | 3 lines
Remove unused variable.
........
r370771 | mmichelson | 2012-08-03 16:43:52 -0500 (Fri, 03 Aug 2012) | 5 lines
Seriously? Another compilation error fixed.
Somebody beat me.
........
Merged revisions 370769-370771 from http://svn.asterisk.org/svn/asterisk/branches/1.8
........
Merged revisions 370772 from http://svn.asterisk.org/svn/asterisk/branches/10
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@370773 65c4cc65-6c06-0410-ace0-fbb531ad65f3
When the chan_sip cleanup went in, a typo was included that caused some
subscriptions of non-Polycom phones to be limited to the same
capabilities as Polycom phones. This resolves the failures in the test
suite resulting from this regression.
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@370740 65c4cc65-6c06-0410-ace0-fbb531ad65f3
This is a patch from kkm from review board.
This is useful for adding headers to REFER requests that
emanate from a Transfer() dialplan application call.
This also fixes some uses of the Referred-by header, removing
an extra set of angle brackets.
I've modified the reporter's original patch to not require
any additions to the sip_refer header and to just remove the
referred_by_name from sip_refer since it is no longer needed
or used.
(closes Issue ASTERISK-17639)
reported by Kirill Katsnelson
Patches:
019059-sip-refer-addheaders-trunk-353549.diff
uploaded by Kirill Katsnelson (license #5845)
Review: https://reviewboard.asterisk.org/r/1159
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@370691 65c4cc65-6c06-0410-ace0-fbb531ad65f3
With a large number of SIP peers registered, performing a SIP reload causes a
flood of SIP OPTIONS request packets. These are immediately sent out, and, as
responses come back, can cause peers to be flagged as 'lagged' due to handling
of the many response messages.
This fix prevents this "packet storm" and schedules the pokes for a random
time. That time varies between 1 ms and the peer's qualify time, or, if
the qualify time is unknown, the global qualifyfreq setting.
The committed patch has some very small modifications to the patch schmidts
wrote for the review.
(closes issue ASTERISK-19154)
Reported by: Nicolo Mazzon
patches:
issue19154.patch license #6034 uploaded by schmidts
Review: https://reviewboard.asterisk.org/r/1652
........
Merged revisions 370666 from http://svn.asterisk.org/svn/asterisk/branches/1.8
........
Merged revisions 370672 from http://svn.asterisk.org/svn/asterisk/branches/10
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@370677 65c4cc65-6c06-0410-ace0-fbb531ad65f3
This clean up was broken out from
https://reviewboard.asterisk.org/r/1976/ and addresses the following:
- struct sip_refer converted to use the stringfields API.
- sip_{refer|notify}_allocate -> sip_{notify|refer}_alloc to match
other *alloc functions.
- Replace get_msg_text, get_msg_text2 and get_pidf_body -> No, not
get_pidf_msg_text_body3 but get_content, to match add_content.
- get_body doesn't get the request body, renamed to get_content_line.
- get_body_by_line doesn't get the body line, and is just a simple if
test. Moved code inline and removed function.
- Remove camelCase in struct sip_peer peer state variables,
onHold -> onhold, inUse -> inuse, inRinging -> ringing.
- Remove camelCase in struct sip_request rlPart1 -> rlpart1,
rlPart2 -> rlpart2.
- Rename instances of pvt->randdata to pvt->nonce because that is what
it is, no need to update struct sip_pvt because _it already has a
nonce field_.
- Removed struct sip_pvt randdata stringfield.
- Remove useless (and inconsistent) 'header' suffix on variables in
handle_request_subscribe.
- Use ast_strdupa on Event header in handle_request_subscribe to avoid
overly complicated strncmp calls to find the event package.
- Move get_destination check in handle_request_subscribe to avoid
duplicate checking for packages that don't need it.
- Move extension state callback management in handle_request_subscribe
to avoid duplicate checking for packages that don't need it.
- Remove duplicate append_date prototype.
- Rename append_date -> add_date to match other add_xxx functions.
- Added add_expires helper function, removed code that manually added
expires header.
- Remove _header suffix on add_diversion_header (no other header adding
functions have this).
- Don't pass req->debug to request handle_request_XXXXX handlers if req
is also being passed.
- Don't pass req->ignore to check_auth as req is already being passed.
- Don't create a subscription in handle_request_subscribe if
p->expiry == 0.
- Don't walk of the back of referred_by_name when splitting string in
get_refer_info
- Remove duplicate check for no dialog in handle_incoming when
sipmethod == SIP_REFER, handle_request_refer checks for that.
Review: https://reviewboard.asterisk.org/r/1993/
Patch-by: gareth
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@370636 65c4cc65-6c06-0410-ace0-fbb531ad65f3
This patch was submitted by mnicholson a while back. It adds a new AMI action
which allows users to request SIP peer status on demand similar to existing
PeerStatus events and to the output you would see from CLI with sip show peer
Review: https://reviewboard.asterisk.org/r/1098/
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@370518 65c4cc65-6c06-0410-ace0-fbb531ad65f3
Didn't previously check that a non NULL IAX channel was stored in the array
at the requested position before attempting iax_pvt_callid_get
(closes issue ASTERISK-20145)
Reported by: Birger "WIMPy" Harzenetter
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@370335 65c4cc65-6c06-0410-ace0-fbb531ad65f3
chan_misdn was not updated properly to account for a change in
parameters for HANGUPCAUSE functionality. It now builds properly.
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@370328 65c4cc65-6c06-0410-ace0-fbb531ad65f3
The HANGUPCAUSE hash (trunk only) meant to replace SIP_CAUSE has now
been replaced with the HANGUPCAUSE and HANGUPCAUSE_KEYS dialplan
functions to better facilitate access to the AST_CAUSE translations
for technology-specific cause codes. The HangupCauseClear application
has also been added to remove this data from the channel.
(closes issue SWP-4738)
Review: https://reviewboard.asterisk.org/r/2025/
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@370316 65c4cc65-6c06-0410-ace0-fbb531ad65f3
A number of applications/AMI commands in Asterisk have specific behavioral
differences depending on the resource or channel technology those
applications are executed on. For example, the MessageSend application/
command is technology agnostic, but how the channel drivers that support
that functionality behave is dependant on the protocols and channel
driver implementation. Prior to this patch, those details were either
documented in the application/command documentation itself, or were left
undocumented.
This patch adds a new element to the documentation schema, <info/>. An info
node is essentially a piece of technology specific reference information that
can be included by any top level XML documentation node. For example, the
MessageSend application can now include XMPP/SIP specific information, where
that technology specific information can be defined in chan_motif/res_xmpp/
chan_sip. Likewise, that information can also be included in the MessageSend
AMI command.
Review: https://reviewboard.asterisk.org/r/2049
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@370278 65c4cc65-6c06-0410-ace0-fbb531ad65f3
This fix involves moving the allocation of some temporary codec structures to the heap and also reduces the number of maximum payloads to something more sane for both regular and low memory builds.
(closes issue ASTERISK-20140)
Reported by: jonnt
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@370171 65c4cc65-6c06-0410-ace0-fbb531ad65f3
This patch adds Named ACL functionality to Asterisk. This allows system
administrators to define an ACL and refer to it by a unique name. Configurable
items can then refer to that name when specifying access control lists.
It also includes updates to all core supported consumers of ACLs. That includes
manager, chan_sip, and chan_iax2. This feature is based on the deluxepine-trunk
by Olle E. Johansson and provides a subset of the Named ACL functionality
implemented in that branch. For more information on this feature, see acl.conf
and/or the Asterisk wiki.
Review: https://reviewboard.asterisk.org/r/1978/
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@369959 65c4cc65-6c06-0410-ace0-fbb531ad65f3
The awk script parses out the first instance of the DOCUMENTATION tag that it
finds within a file. If a file did not previously have a DOCUMENTATION tag
but received one due to it having an AMI event, then the XML fragment
associated with the AMI event was erroneously placed in the resulting XML
file. Without the python scripts, these XML fragments will not validate.
This patch adds DOCUMENTATION tags at the top of those files that did
not previously have them to prevent the awk script from pulling AMI event
documentation.
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@369910 65c4cc65-6c06-0410-ace0-fbb531ad65f3
This patch adds some basic documentation for a number of modules. This
includes core source files in Asterisk (those in main), as well as
chan_agent, chan_dahdi, chan_local, sig_analog, and sig_pri. The DTD
has also been updated to allow referencing of AMI commands.
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@369905 65c4cc65-6c06-0410-ace0-fbb531ad65f3
Asterisk now generates image stream declinations with the same
transport case that it used to before the stream declination
improvements. (udptl vs UDPTL)
(closes issue SWP-4736)
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@369900 65c4cc65-6c06-0410-ace0-fbb531ad65f3
This change allows an endpoint in motif.conf to be configured with a preference of G.722 and fallback of ulaw. With Google this allows communication with Google Talk clients to use G.722 while when using Google Voice ulaw will be used.
(closes issue ASTERISK-20114)
Reported by: Malcolm Davenport
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@369873 65c4cc65-6c06-0410-ace0-fbb531ad65f3
This adds legacy STUN support for RTCP sockets, adds RTCP candidates to the Google transport information, and adds required codec parameters.
(closes issue ASTERISK-20106)
Reported by: Malcolm Davenport
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@369864 65c4cc65-6c06-0410-ace0-fbb531ad65f3
This channel driver is a replacement for both chan_gtalk and chan_jingle but adds additional features not found in either.
These features include full configuration reload, video, full codec support, bidirectional cause code mapping, hold,
unhold, and ringing indication. It is also compliant with the current published Jingle and Google Jingle specifications.
The original Google Talk protocol is also supported for Google Voice interoperability.
You may ask yourself though where the name motif comes from... and I would say to you... music!
motif: a perceivable or salient recurring fragment or succession of notes
Sorta like a jingle!
Review: https://reviewboard.asterisk.org/r/1917/
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@369769 65c4cc65-6c06-0410-ace0-fbb531ad65f3
It is not necessary to generate information cause code frames on every
protocol event that occurs. This removes all the instances where the
frame was not conveying a cause code and was instead just conveying a
protocol-specific message. This also corrects the generation of the
message associated with disconnects for MFC/R2 to use the MFC/R2
specific text for the disconnect cause.
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@369765 65c4cc65-6c06-0410-ace0-fbb531ad65f3
Commits r369557 and r369579 were done to improve handling of re-INVITEs
when the UA that was supposed to receive the re-INVITE fails to respond.
A limitation of those patches occurred when a UA sent a provisional
response to the re-INVITE. This triggered a sending of a BYE in
check_pending. This patch tweaks the handling of the re-INVITE such that
a BYE is not sent in response to those messages.
(issue ASTERISK-19992)
Reported by: Steve Davies
Tested by: Steve Davies
patches:
(reinvite_tweak.diff license #5012 by Steve Davies)
........
Merged revisions 369626 from http://svn.asterisk.org/svn/asterisk/branches/1.8
........
Merged revisions 369627 from http://svn.asterisk.org/svn/asterisk/branches/10
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@369628 65c4cc65-6c06-0410-ace0-fbb531ad65f3
Hangup handlers are an alternative to the h extension. They can be used
in addition to the h extension. The idea is to attach a Gosub routine to
a channel that will execute when the call hangs up. Whereas which h
extension gets executed depends on the location of dialplan execution when
the call hangs up, hangup handlers are attached to the call channel. You
can attach multiple handlers that will execute in the order of most
recently added first.
(closes issue ASTERISK-19549)
Reported by: Mark Murawski
Tested by: rmudgett
Review: https://reviewboard.asterisk.org/r/2002/
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@369493 65c4cc65-6c06-0410-ace0-fbb531ad65f3
The basic problem is that if a re-INVITE is sent by Asterisk and it receives a
provisional response, but no final response, then the dialog is never torn
down. In addition to leaking memory, this also leaks file descriptors and will
eventually lead to Asterisk no longer being able to process calls.
This patch just keeps track of whether there is an outstanding re-INVITE, and if
there is goes ahead and cleans up everything as though there was no outstanding
reinvite.
Review: https://reviewboard.asterisk.org/r/2009/
(closes issue ASTERISK-19992)
Reported by: Steve Davies
Tested by: Steve Davies, Terry Wilson
........
Merged revisions 369436 from http://svn.asterisk.org/svn/asterisk/branches/1.8
........
Merged revisions 369437 from http://svn.asterisk.org/svn/asterisk/branches/10
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@369449 65c4cc65-6c06-0410-ace0-fbb531ad65f3
Adds call ID logging changes to specific channel drivers that weren't handled
handled in phase II of Call ID Logging. Also covers logging for threads for
threads created by systems that may be involved with many different calls.
Extra special thanks to Richard for rigorous review of chan_dahdi and its
various signalling modules.
review: https://reviewboard.asterisk.org/r/1927/
review: https://reviewboard.asterisk.org/r/1950/
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@369414 65c4cc65-6c06-0410-ace0-fbb531ad65f3
When Asterisk receives an INVITE from an external domain when allowexternaldomains=no
send a 403 instead of a 404. This is consistent with Asterisk's behavior when receiving
a REGISTER in this situation.
(Closes issue ASTERISK-19601)
Reported by Matthew Jordan
Patches:
ASTERISK-19601-no401.patch uploaded by Mark Michelson (License #5049)
........
Merged revisions 369302 from http://svn.asterisk.org/svn/asterisk/branches/1.8
........
Merged revisions 369303 from http://svn.asterisk.org/svn/asterisk/branches/10
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@369304 65c4cc65-6c06-0410-ace0-fbb531ad65f3
The sendonly/recvonly/sendrecv/inactive media stream attributes were
parsed for video, but nothing was ever done with them. With this code
removed, an UNSUPPORTED message is produced when these attributes are
used in conjunction with a video stream which is the better behavior
since they were never really supported in the first place.
........
Merged revisions 369195 from http://svn.asterisk.org/svn/asterisk/branches/1.8
........
Merged revisions 369206 from http://svn.asterisk.org/svn/asterisk/branches/10
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@369207 65c4cc65-6c06-0410-ace0-fbb531ad65f3
This adds a minimal implementation of the "Who Hung Up?" Asterisk 11
work to chan_dahdi.c for the MFC/R2 DAHDI subtech. Given the way that
OpenR2 interfaces with chan_dahdi, it is much harder to expose the
type of protocol information that is available in PRI, SS7, or other
channel technologies.
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@369190 65c4cc65-6c06-0410-ace0-fbb531ad65f3
This is part of the DAHDI support for the Asterisk 11 "Who Hung Up?"
project and covers the implementation for the technologies implemented
in sig_analog.c and sig_pri.c. Tested on a local machine to verify
protocol and cause information is available.
Review: https://reviewboard.asterisk.org/r/1953/
(issue SWP-4222)
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@369185 65c4cc65-6c06-0410-ace0-fbb531ad65f3
Channel drivers that allow native bridging need to handle
AST_CONTROL_PVT_CAUSE_CODE frames and previously did not handle them
properly, usually breaking out of the native bridge. This change
corrects that behavior and exposes the available cause code information
to the dialplan while native bridges are in place. This required
exposing the HANGUPCAUSE hash setter outside of channel.c, so
additional documentation has been added.
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@369086 65c4cc65-6c06-0410-ace0-fbb531ad65f3
Asterisk was incorrectly setting the destination of CANCELs
and ACKs for error responses to the URI of the initial INVITE.
This resulted in further requests, such as INVITEs with authentication
credentials, to be routed incorrectly. Instead, when these CANCEL
or ACKs are to be sent, we should simply keep the destination the
same as what it previously was. There is no need to alter it any.
(closes issue ASTERISK-20008)
Reported by Marcus Hunger
Patches:
ASTERISK-20008.patch uploaded by Mark Michelson (license #5049)
........
Merged revisions 369066 from http://svn.asterisk.org/svn/asterisk/branches/1.8
........
Merged revisions 369067 from http://svn.asterisk.org/svn/asterisk/branches/10
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@369068 65c4cc65-6c06-0410-ace0-fbb531ad65f3
Added test to skinny_register to only allow device to register against
a device that is not already registered.
Addback l->device test for skinny_show_lines. Fixes segfault if a line
is configured but not configured to a device. Reverses part of r368680.
Removed redundant l->device tests in subsubstate and dumpsub. l->device
will always be valid if these routines are called. Reverses 368948 -
discussed with mjordan on irc.
Some indentation cleanup.
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@369034 65c4cc65-6c06-0410-ace0-fbb531ad65f3
This change replaces the static array of four representable media
streams with an AST_LIST so that chan_sip can keep track of offered
media streams. This allows chan_sip to deal with offers containing
multiple same-type streams and many other situations without rejecting
the SDP offer in its entirety, yet still generating a valid response.
This also covers cases where Asterisk can not comprehend the offer if
it is in the correct format.
Previously, chan_sip would reject SDP offers or entirely ignore
individual stream offers in an effort to be more compatible which
would often result in invalid SDP responses.
Review: https://reviewboard.asterisk.org/r/1988/
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@369028 65c4cc65-6c06-0410-ace0-fbb531ad65f3
........
r369001 | kpfleming | 2012-06-15 10:56:08 -0500 (Fri, 15 Jun 2012) | 11 lines
Add support-level indications to many more source files.
Since we now have tools that scan through the source tree looking for files
with specific support levels, we need to ensure that every file that is
a component of a 'core' or 'extended' module (or the main Asterisk binary)
is explicitly marked with its support level. This patch adds support-level
indications to many more source files in tree, but avoids adding them to
third-party libraries that are included in the tree and to source files
that don't end up involved in Asterisk itself.
........
r369002 | kpfleming | 2012-06-15 10:57:14 -0500 (Fri, 15 Jun 2012) | 3 lines
Add a script to enable finding source files without support-levels defined.
........
Merged revisions 369001-369002 from http://svn.asterisk.org/svn/asterisk/branches/1.8
........
Merged revisions 369005 from http://svn.asterisk.org/svn/asterisk/branches/10
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@369013 65c4cc65-6c06-0410-ace0-fbb531ad65f3
Continuing with the Who Hung Up? project for Asterisk 11, this adds
support to IAX2 for the HANGUPCAUSE hash.
Additionally, this breaks out some functionality in frame.c for getting
information about frame types and subclasses.
Review: https://reviewboard.asterisk.org/r/1941/
(issue SWP-4222)
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@369007 65c4cc65-6c06-0410-ace0-fbb531ad65f3
AST-2012-008 (r367844) fixed a denial of service attack exploitable in the
Skinny channel driver that occurred when certain messages are sent after a
previously registered station sends an Off Hook message. Unresolved in that
patch is an issue in the Asterisk 10 releases, wherein, if a Station Key
Pad Button Message is processed after an Off Hook message, the channel driver
will inappropriately dereference a NULL pointer.
This patch fixes those places where the message handling or the channel
callback functions would attempt to dereference the line's pointer to the
device.
(issue ASTERISK-19905)
Reported by: Christoph Hebeisen
Tested by: mjordan, Christoph Hebeisen
Patches:
AST-2012-009-10.diff uploaded by mjordan (license 6283)
........
Merged revisions 368947 from http://svn.asterisk.org/svn/asterisk/branches/10
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@368948 65c4cc65-6c06-0410-ace0-fbb531ad65f3
On incoming calls, we were setting the cid_tag on the dialog only if there was
no remote party information (Remote-Party-ID or P-Asserted-Identity) present.
The Caller ID tag is an invented parameter, though, and should be set no matter
the circumstance.
(closes issue ASTERISK-19859)
Reported by Thomas Arimont
(closes issue AST-884)
Reported by Trey Blancher
........
Merged revisions 368807 from http://svn.asterisk.org/svn/asterisk/branches/1.8
........
Merged revisions 368808 from http://svn.asterisk.org/svn/asterisk/branches/10
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@368809 65c4cc65-6c06-0410-ace0-fbb531ad65f3
In r367163, "send to voicemail" functionality was added to the SIP channel
driver. This required updating the party redirecting information for the
channel based on the headers provided in the REFER request. When the
redirecting party information is updated on the channel, a call to
ast_indicate_data occurs. Because handle_request_refer still had the sip_pvt
locked, a deadlock could occur between the pbx_thread and the do_monitor thread
servicing the REFER request.
This patch preserves the proper locking order between the channel and the
sip_pvt by ensuring that the sip_pvt is unlocked prior to updating the party
redirecting information on the channel.
(closes issue AST-903)
Reported by: Matt Jordan
patches:
jira_ast_903_trunk.patch by rmudgett (license 5621)
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@368793 65c4cc65-6c06-0410-ace0-fbb531ad65f3
ANI2 information is now parsed out of SIP From headers when present in
the oli, isup-oli, and ss7-oli parameters and is available via the
CALLERID(ani2) dialplan function.
(closes issue ASTERISK-19912)
Patch-by: Rob Gagnon
Review: https://reviewboard.asterisk.org/r/1947/
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@368784 65c4cc65-6c06-0410-ace0-fbb531ad65f3
Original was testing for d->session, setting and testing again (all nested).
Removed duplicate testing and restructured function to test/return and then
the main code.
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@368681 65c4cc65-6c06-0410-ace0-fbb531ad65f3
Removed d->registered which was mirroring d->session. Changed relevant
references to use d->session instead.
Moved setting and unsetting of l->device from session register to device
configuration. As such, l->device will always be valid unless it is has not
been configured to a device. Revised various test where checking if a device
is registered to use l->device->session.
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@368680 65c4cc65-6c06-0410-ace0-fbb531ad65f3
A deadlock can occur when a POTS phone tries to flash hook to originate a
second call for 3-way or transfer. If another process is scanning the
channels container when the POTS line flash hooks then a deadlock will
occur.
* Release the channel and private locks when creating a new channel as a
result of a flash hook.
(closes issue ASTERISK-19842)
Reported by: rmudgett
Tested by: rmudgett
........
Merged revisions 368644 from http://svn.asterisk.org/svn/asterisk/branches/1.8
........
Merged revisions 368645 from http://svn.asterisk.org/svn/asterisk/branches/10
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@368646 65c4cc65-6c06-0410-ace0-fbb531ad65f3
If a dialog-starting INVITE contains a to-tag, then Asterisk
will respond with a 481. In this case, the resulting incoming
ACK would not be matched, so Asterisk would continue retransmitting
the 481 until the transaction times out.
There were two issues. Asterisk, upon creating a sip_pvt would generate
a local tag. However, when the time came to transmit the 481, since there
was a to-tag in the INVITE, Asterisk would place this original to-tag
in the 481 response. When the ACK came in, Asterisk would attempt to
match the to-tag in the ACK to the generated local tag. Unfortunately,
Asterisk never actually transmitted a response with the generated local
tag, so the to-tag in the ACK would not match.
The other problem was that when the 481 was sent, nothing was set
on the sip_pvt to indicate what CSeq is expected in the ACK.
To fix the first problem, we zero out the to-tag seen in the incoming
INVITE. This way, Asterisk, when time to send a response, will send
its generated local tag instead.
To fix the second problem, we set the sip_pvt's pendinginvite to the
CSeq of the INVITE when we send a 481.
(closes issue ASTERISK-19892)
Reported by Mark Michelson
........
Merged revisions 368625 from http://svn.asterisk.org/svn/asterisk/branches/1.8
........
Merged revisions 368629 from http://svn.asterisk.org/svn/asterisk/branches/10
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@368637 65c4cc65-6c06-0410-ace0-fbb531ad65f3
This was essentially duplicated functionality where normal channels used
AST_CAUSE_ANSWERED_ELSEWHERE while local channels and queues used
AST_FLAG_ANSWERED_ELSEWHERE. This removes the flag and converts that usage
into AST_CAUSE_ANSWERED_ELSEWHER usage.
Review: https://reviewboard.asterisk.org/r/1944
(closes issue ASTERISK-19865)
Patch-by: Birger Harzenetter
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@368519 65c4cc65-6c06-0410-ace0-fbb531ad65f3
Revision 351130 broke corect HANGUPCAUSE setting
for the 404 case in chan_sip. Other cases were also
potentially broken. This patch fixes the relaying
of causes to be what they used to be.
(closes issue ASTERISK-19914)
Reported by Pavel Troller
Tested by Walter Doekes (via a reviewboard test to be committed later)
Patches:
chan_sip.diff uploaded by Pavel Troller (license #6302)
........
Merged revisions 368498 from http://svn.asterisk.org/svn/asterisk/branches/1.8
........
Merged revisions 368499 from http://svn.asterisk.org/svn/asterisk/branches/10
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@368500 65c4cc65-6c06-0410-ace0-fbb531ad65f3
Presence support has been added. This is accomplished by
allowing for presence hints in addition to device state
hints. A dialplan function called PRESENCE_STATE has been
added to allow for setting and reading presence. Presence
can be transmitted to Digium phones using custom XML
elements in a PIDF presence document.
Voicemail has new APIs that allow for moving, removing,
forwarding, and playing messages. Messages have had a new
unique message ID added to them so that the APIs will work
reliably. The state of a voicemail mailbox can be obtained
using an API that allows one to get a snapshot of the mailbox.
A voicemail Dialplan App called VoiceMailPlayMsg has been
added to be able to play back a specific message.
Configuration hooks have been added. Configuration hooks
allow for a piece of code to be executed when a specific
configuration file is loaded by a specific module. This is
useful for modules that are dependent on the configuration
of other modules.
chan_sip now has a public method that allows for a custom
SIP INFO request to be sent mid-dialog. Digium phones use
this in order to display progress bars when files are played.
Messaging support has been expanded a bit. The main
visible difference is the addition of an AMI action
MessageSend.
Finally, a ParkingLots manager action has been added in order
to get a list of parking lots.
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@368435 65c4cc65-6c06-0410-ace0-fbb531ad65f3
Asterisk should not accept SDP offers that contain unknown RTP profiles (for
audio/video streams) or unknown top-level media types. When it does, it answers
with an SDP that does not match the offer properly, and this will nearly
always result in a broken call. This patch causes such offers to be rejected.
Review: https://reviewboard.asterisk.org/r/1811/
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@368269 65c4cc65-6c06-0410-ace0-fbb531ad65f3
* 'Unsupported media type' is only reported when that is in fact the case,
not when a supported media type is included in an 'm' line that has an
invalid format.
* All warning messages related to parsing 'm' lines now include the 'm' line contents.
* (minor bugfix) newline added to port-number-zero warning messages.
* Warning messages improved to use RFC-specified terminology for various items.
* Warnings for offers that include more than one port for a single media type now
include the media type.
Review: https://reviewboard.asterisk.org/r/1811/
........
Merged revisions 368218 from http://svn.asterisk.org/svn/asterisk/branches/1.8
........
Merged revisions 368267 from http://svn.asterisk.org/svn/asterisk/branches/10
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@368268 65c4cc65-6c06-0410-ace0-fbb531ad65f3
When Asterisk servers are set up back-to-back, and
direct media is to be used betweeen endpoints, it is
fairly common for the two Asterisk servers to send
direct media reinvites to each other simultaneously.
This results in 491s and ACKs being exchanged between
the servers. While the media eventually gets set up
properly, the problem is that there can be a noticeable
delay for the streams to stabilize.
This patch adds a new directmedia option called "outgoing".
With this set, an immediate direct media reinvite will only
be sent if the call direction is outgoing. For incoming
dialogs, an immediate direct media reinvite will not be sent,
but further "reactionary" direct media reinvites may be sent.
Review: https://reviewboard.asterisk.org/r/1954
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@368143 65c4cc65-6c06-0410-ace0-fbb531ad65f3
When a skinny session is unregistered, the corresponding device pointer is set
to NULL in the channel private data. If the client was not in the on-hook state
at the time the connection was closed, the device pointer can later be
dereferened if a message or channel event attempts to use a line's pointer to
said device.
The patches prevent this from occurring by checking the line's pointer in
message handlers and channel callbacks that can fire after an unregistration
attempt.
(closes issue ASTERISK-19905)
Reported by: Christoph Hebeisen
Tested by: mjordan, Damien Wedhorn
Patches:
AST-2012-008-1.8.diff uploaded by mjordan (license 6283)
AST-2012-008-10.diff uploaded by mjordan (licesen 6283)
........
Merged revisions 367844 from http://svn.asterisk.org/svn/asterisk/branches/10
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@367845 65c4cc65-6c06-0410-ace0-fbb531ad65f3
* Made schedule_delivery() set the received frame f->data.ptr to NULL if
the datalen is zero.
* Fix queue_signalling() memcpy() size error.
* Made queue_signalling() not use C++ keyword variable names.
(closes issue ASTERISK-19597)
Reported by: mgrobecker
Patches:
jira_asterisk_19597_v1.8.patch (license #5621) patch uploaded by rmudgett
Tested by: rmudgett, Michael L. Young
........
Merged revisions 367781 from http://svn.asterisk.org/svn/asterisk/branches/1.8
........
Merged revisions 367782 from http://svn.asterisk.org/svn/asterisk/branches/10
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@367783 65c4cc65-6c06-0410-ace0-fbb531ad65f3
The pvt_sip allowtransfer was not being set to that of the peer's setting.
Therefore, the global allowtransfer setting was being used instead which would
lead to calls not being transfered if the global setting was set to 'no' despite
the setting on the peer being 'yes' and vice versa, calls would be allowed to
transfer even if the peer's setting was 'no' but the global setting was 'yes'.
(Closes issue ASTERISK-19856)
Reported by: Jacek
Tested by: Michael L. Young, Jacek
Patches:
issue-asterisk-19856-branch10-v3.diff uploaded by
Michael L. Young (license 5026)
Review: https://reviewboard.asterisk.org/r/1923/
........
Merged revisions 367730 from http://svn.asterisk.org/svn/asterisk/branches/1.8
........
Merged revisions 367731 from http://svn.asterisk.org/svn/asterisk/branches/10
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@367732 65c4cc65-6c06-0410-ace0-fbb531ad65f3
When remotely bridging calls with directmedia, Asterisk would check
the address of the peers/users holding directmedia ACLs (set via
directmediapermit/directmediadeny) instead of the bridged peer. This
is similar to r366547, but trunk specific and involves changes to
the rtpengine instead of just chan_sip.
(closes issue AST-876)
review: https://reviewboard.asterisk.org/r/1924/
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@367640 65c4cc65-6c06-0410-ace0-fbb531ad65f3
Previously, MWI logic utilized a counter called 'lastmsgssent' to know whether
or not MWI NOTIFY requests had been sent to a specific peer. When MWI
notifications were changed to use the internal event framework, this value was
no longer needed for its original purpose. Hence, it was no longer updated
with the new/old message counts for a peer. The value was previously removed
for Asterisk 10; however, since it was still present in Asterisk 1.8 and still
useful for reporting purposes, it was decided to re-add the value.
This patch re-adds the 'LastMsgsSent' field in the response to an AMI/CLI 'sip
show peer [peer]' command, and makes it so that the value of lastmsgssent is
updated appropriately. The value should now display the new/old message counts
for a particular peer.
(closes issue ASTERISK-17866)
Reported by: Steve Davies
patches by:
ast-17866-rb1272.patch (License #5041 by irroot)
Modified slightly for this commit
Review: https://reviewboard.asterisk.org/r/1939
........
Merged revisions 367362 from http://svn.asterisk.org/svn/asterisk/branches/1.8
........
Merged revisions 367369 from http://svn.asterisk.org/svn/asterisk/branches/10
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@367376 65c4cc65-6c06-0410-ace0-fbb531ad65f3
This change accommodates two methods by which calls can be directed to
a user's voicemail.
* Incoming calls can be redirected to any user's voicemail.
* Established calls can be blind transferred to any user's voicemail.
Digium phones indicate the desire to direct a call to voicemail by using
a Diversion header with a reason parameter of "send_to_vm".
This patch adds the "send_to_vm" reason as a valid redirecting reason. In
addition, chan_sip.c has been modified to update redirecting information
on the transferred channel by reading a Diversion header on a REFER request.
(closes issue AST-871)
Reported by Malcolm Davenport
Review: https://reviewboard.asterisk.org/r/1925
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@367163 65c4cc65-6c06-0410-ace0-fbb531ad65f3
This addresses core findings 4 and 6.
Moises Silva helped me by stating that a break could be
safely added to the case where it is added in chan_dahdi.c
In say.c, I have added a comment indicating that static analysis
complains but that it is currently unknown if this is correct.
This fixes all core findings of this type.
(closes issue ASTERISK-19662)
reported by Matthew Jordan
........
Merged revisions 367027 from http://svn.asterisk.org/svn/asterisk/branches/1.8
........
Merged revisions 367028 from http://svn.asterisk.org/svn/asterisk/branches/10
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@367029 65c4cc65-6c06-0410-ace0-fbb531ad65f3
SSL_CTX structures were allocated but never freed. This was a bigger
issue for clients than servers since new SSL_CTX structures could be
allocated for each connection. Servers, on the other hand, typically
set up a single SSL_CTX for their lifetime.
This is solved in two ways:
1. In __ssl_setup(), if a tcptls_cfg has an ssl_ctx on it, it is
freed so that a new one can take its place.
2. A companion to ast_ssl_setup() called ast_ssl_teardown() has
been added so that servers can properly free their SSL_CTXs.
(issue ASTERISK-19278)
........
Merged revisions 367002 from http://svn.asterisk.org/svn/asterisk/branches/1.8
........
Merged revisions 367003 from http://svn.asterisk.org/svn/asterisk/branches/10
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@367010 65c4cc65-6c06-0410-ace0-fbb531ad65f3
This patch adds to what was fixed in r366880. Specifically, it addresses the
following:
* chan_sip: dispose of an allocated frame in off nominal code paths in
sip_rtp_read
* func_odbc: when disposing of an allocated resultset, ensure that any rows
that were appended to that resultset are also disposed of
* cli: free the created return string buffer in another off nominal code
path
* chan_dahdi: free a frame that was allocated by the dsp layer if we choose
not to process that frame
(issue ASTERISK-19665)
Reported by: Matt Jordan
Review: https://reviewboard.asterisk.org/r/1922/
........
Merged revisions 366944 from http://svn.asterisk.org/svn/asterisk/branches/1.8
........
Merged revisions 366948 from http://svn.asterisk.org/svn/asterisk/branches/10
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@366955 65c4cc65-6c06-0410-ace0-fbb531ad65f3
This patch addresses a number of memory leaks in a variety of modules that were
found by a static analysis tool. A brief summary of the changes:
* app_minivm: free ast_str objects on off nominal paths
* app_page: free the ast_dial object if the requested channel technology
cannot be appended to the dialing structure
* app_queue: if a penalty rule failed to match any existing rule list
names, the created rule would not be inserted and its memory
would be leaked
* app_read: dispose of the created silence detector in the presence of
off nominal circumstances
* app_voicemail: dispose of an allocated unique ID field for MWI event
un-subscribe requests in off nominal paths; dispose of
configuration objects when using the secret.conf option
* chan_dahdi: dispose of the allocated frame produced by ast_dsp_process
* chan_iax2: properly unref peer in CLI command "iax2 unregister"
* chan_sip: dispose of the allocated frame produced by sip_rtp_read's
call of ast_dsp_process; free memory in parse unit tests
* func_dialgroup: properly deref ao2 object grhead in nominal path of
dialgroup_read
* func_odbc: free resultset in off nominal paths of odbc_read
* cli: free match_list in off nominal paths of CLI match completion
* config: free comment_buffer/list_buffer when configuration file load
is unchanged; free the same buffers any time they were
created and config files were processed
* data: free XML nodes in various places
* enum: free context buffer in off nominal paths
* features: free ast_call_feature in off nominal paths of applicationmap
config processing
* netsock2: users of ast_sockaddr_resolve pass in an ast_sockaddr struct
that is allocated by the method. Failures in
ast_sockaddr_resolve could result in the users of the method
not knowing whether or not the buffer was allocated. The
method will now not allocate the ast_sockaddr struct if it
will return failure.
* pbx: cleanup hash table traversals in off nominal paths; free
ignore pattern buffer if it already exists for the specified
context
* xmldoc: cleanup various nodes when we no longer need them
* main/editline: various cleanup of pointers not being freed before being
assigned to other memory, cleanup along off nominal paths
* menuselect/mxml: cleanup of value buffer for an attribute when that attribute
did not specify a value
* res_calendar*: responses are allocated via the various *_request method
returns and should not be allocated in the various
write_event methods; ensure attendee buffer is freed if no
data exists in the parsed node; ensure that calendar objects
are de-ref'd appropriately
* res_jabber: free buffer in off nominal path
* res_musiconhold: close the DIR* object in off nominal paths
* res_rtp_asterisk: if we run out of ports, close the rtp socket object and free
the rtp object
* res_srtp: if we fail to create the session in libsrtp, destroy the
temporary ast_srtp object
(issue ASTERISK-19665)
Reported by: Matt Jordan
Review: https://reviewboard.asterisk.org/r/1922
........
Merged revisions 366880 from http://svn.asterisk.org/svn/asterisk/branches/1.8
........
Merged revisions 366881 from http://svn.asterisk.org/svn/asterisk/branches/10
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@366917 65c4cc65-6c06-0410-ace0-fbb531ad65f3
Introduced with r366842, a function call made only with TEST_FRAMEWORK enabled
was missing an argument since the function arguments were changed.
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@366896 65c4cc65-6c06-0410-ace0-fbb531ad65f3
This patch improves the handling of call id logging significantly with regard
to transfers and adding APIs to better handle specific aspects of logging.
Also, changes have been made to chan_sip in order to better handle the creation
of callids and to enable the monitor thread to bind itself to a particular
call id when a dialog is determined to be related to a callid. It then unbinds
itself before returning to normal monitoring.
review: https://reviewboard.asterisk.org/r/1886/
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@366842 65c4cc65-6c06-0410-ace0-fbb531ad65f3
This patch fixes two problems pointed out by a static analysis tool.
* In chan_dahdi, when an event is handled the index of the sub channel is first
obtained. In very off nominal cases, the method that determines the index
can return a negative value. In the event handling code, whether or not
the index returned is valid was being checked after that value was used to
index into an array. This patch makes it so the value is checked before
any indexing is done.
* In res_calendar_ews, sizeof was being passed a pointer instead of the struct to
determine the amount of memory to allocate.
(issue ASTERISK-19651)
Reported by: Matt Jordan
(closes issue ASTERISK-19671)
Reported by: Matt Jordan
........
Merged revisions 366740 from http://svn.asterisk.org/svn/asterisk/branches/1.8
........
Merged revisions 366741 from http://svn.asterisk.org/svn/asterisk/branches/10
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@366746 65c4cc65-6c06-0410-ace0-fbb531ad65f3
When ast_call() operates on a local channel, it copies a lot of things
from the local;1 channel to the local;2 channel. This includes among
other things, channel variables and party id information.
Other reasons it was a bad idea to run predial on the local;2 channel:
1) The channel has not been completely setup. The ast_call() completes
the setup.
2) The local;2 caller and connected line party information is opposite to
any other channels predial runs on. (And it hasn't been setup yet.)
* Partially back out -r366183 by removing the chan_local implementation of
the struct ast_channel_tech.pre_call callback.
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@366546 65c4cc65-6c06-0410-ace0-fbb531ad65f3
This is the starting point for the Asterisk 11: Who Hung Up work and provides
a framework which will allow channel drivers to report the types of hangup
cause information available in SIP_CAUSE without incurring the overhead of the
MASTER_CHANNEL dialplan function. The initial implementation only includes
cause generation for chan_sip and does not include cause code translation
utilities.
This change deprecates SIP_CAUSE and replaces its method of reporting cause
codes with the new framework. This change also deprecates the 'storesipcause'
option in sip.conf.
Review: https://reviewboard.asterisk.org/r/1822/
(Closes issue SWP-4221)
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@366408 65c4cc65-6c06-0410-ace0-fbb531ad65f3
To make a long story short, reinvite glares were broken
because Asterisk would invert the To and From headers
when ACKing a 491 response.
The reason was because the initreq of the dialog was being
changed to the incoming glared reinvite instead of being
set to the outgoing glared reinvite. This change has three
parts
* In handle_incoming, we never will reject an ACK because it
has a to-tag present, even if we think the request may be out
of dialog.
* In handle_request_invite, we do not change the initreq when
receiving a reinvite to which we will respond with a 491.
* In handle_request_invite, several superflous settings up
pendinginvite have been removed since this is dones automatically
by transmit_response_reliable
Review: https://reviewboard.asterisk.org/r/1911
........
Merged revisions 366389 from http://svn.asterisk.org/svn/asterisk/branches/1.8
........
Merged revisions 366390 from http://svn.asterisk.org/svn/asterisk/branches/10
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@366401 65c4cc65-6c06-0410-ace0-fbb531ad65f3
Before this patch, the predial routine executes on the ;1 channel of a
local channel pair. Executing predial on the ;1 channel of a local
channel pair is of limited utility. Any channel variables set by the
predial routine executing on the ;1 channel will not be available when the
local channel executes dialplan on the ;2 channel.
* Create ast_pre_call() and an associated pre_call() technology callback
to handle running the predial routine. If a channel technology does not
provide the callback, the predial routine is simply run on the channel.
Review: https://reviewboard.asterisk.org/r/1903/
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@366183 65c4cc65-6c06-0410-ace0-fbb531ad65f3
This resolves core findings from ASTERISK-19650 numbers 0-2, 6, 7, 9-11, 14-20,
22-24, 28, 30-32, 34-36, 42-56, 82-84, 87, 89-90, 93-102, 104, 105, 109-111,
and 115. Finding numbers 26, 33, and 29 were already resolved. Those skipped
were either extended/deprecated or in areas of code that shouldn't be
disturbed.
(Closes issue ASTERISK-19650)
........
Merged revisions 366167 from http://svn.asterisk.org/svn/asterisk/branches/1.8
........
Merged revisions 366168 from http://svn.asterisk.org/svn/asterisk/branches/10
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@366169 65c4cc65-6c06-0410-ace0-fbb531ad65f3
chan_sip was coded under the assumption that a SIP dialog with an owner channel
will always be destroyed after the owner channel has been hung up.
However, there are situations where the SIP dialog can time out and auto destruct
before the corresponding channel has hung up. A typical example of this would be
if the 'h' extension in the dialplan takes a long time to complete. In such cases,
__sip_autodestruct() would complain about the dialog being auto destroyed with
an owner channel still in place. The problem is that even once the owner channel
was hung up, the sip_pvt would still be linked in its ao2_container because nothing
would ever unlink it.
The fix for this is that if __sip_autodestruct() is called for a sip_pvt that still
has an owner channel in place, the destruction is rescheduled for 10 seconds in the
future. This will continue until the owner channel is finally hung up.
(closes issue ASTERISK-19425)
reported by David Cunningham
Patches:
ASTERISK-19425.patch uploaded by Mark Michelson (License #5049)
(closes issue ASTERISK-19455)
reported by Dean Vesvuio
Tested by Dean Vesvuio
........
Merged revisions 365896 from http://svn.asterisk.org/svn/asterisk/branches/1.8
........
Merged revisions 365898 from http://svn.asterisk.org/svn/asterisk/branches/10
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@365913 65c4cc65-6c06-0410-ace0-fbb531ad65f3
This uses the calling channel's caller ID and connected line information
to populate the remote and local identities in the dialog-info NOTIFY when
an extension is ringing.
There is a bit of an oddity here, and that is that we seed the remote target
with the To header of the outbound call rather than the from header. This
is because it was reported that seeding with the from header caused hints
to be broken with certain SNOM devices. A comment has been added to the code
to explain this.
(closes issue ASTERISK-16735)
reported by Maciej Krajewski
patches:
local_remote_hint2.diff uploaded by Mark Michelson (license #5049)
16735_tweak1.diff uploaded by Mark Michelson (license #5049)
Tested by Niccolo Belli
........
Merged revisions 365574 from http://svn.asterisk.org/svn/asterisk/branches/1.8
........
Merged revisions 365575 from http://svn.asterisk.org/svn/asterisk/branches/10
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@365576 65c4cc65-6c06-0410-ace0-fbb531ad65f3
Most of the changes here are trivial NULL checks. There are a couple
optimizations to remove the need to check for NULL and outboundproxy parsing
in chan_sip.c was rewritten to avoid use of strtok. Additionally, a bug was
found and fixed with the parsing of outboundproxy when "outboundproxy=," was
set.
(Closes issue ASTERISK-19654)
........
Merged revisions 365398 from http://svn.asterisk.org/svn/asterisk/branches/1.8
........
Merged revisions 365399 from http://svn.asterisk.org/svn/asterisk/branches/10
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@365400 65c4cc65-6c06-0410-ace0-fbb531ad65f3
* Made chan_local.c:check_bridge() check the return value of
ast_channel_masquerade(). In long chains of local channels, the
masquerade occasionally fails to get setup because there is another
masquerade already setup on an adjacent local channel in the chain.
* Made the outgoing local channel (the ;2 channel) flush one voice or
video frame per optimization attempt.
* Made sure that the outgoing local channel also does not have any frames
in its queue before the masquerade.
* Made do the masquerade immediately to minimize the chance that the
outgoing channel queue does not get any new frames added and thus
unconditionally flushed.
* Made block indication -1 (Stop tones) event when the local channel is
going to optimize itself out. When the call is answered, a chain of local
channels pass down a -1 indication for each bridge. This blizzard of -1
events really slows down the optimization process.
(closes issue ASTERISK-16711)
Reported by: Alec Davis
Tested by: rmudgett, Alec Davis
Review: https://reviewboard.asterisk.org/r/1894/
........
Merged revisions 365313 from http://svn.asterisk.org/svn/asterisk/branches/1.8
........
Merged revisions 365320 from http://svn.asterisk.org/svn/asterisk/branches/10
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@365356 65c4cc65-6c06-0410-ace0-fbb531ad65f3
........
r365006 | twilson | 2012-05-02 10:49:03 -0500 (Wed, 02 May 2012) | 12 lines
Fix a CEL LINKEDID_END race and local channel linkedids
This patch has the ;2 channel inherit the linkedid of the ;1 channel and fixes
the race condition by no longer scanning the channel list for "other" channels
with the same linkedid. Instead, cel.c has an ao2 container of linkedid strings
and uses the refcount of the string as a counter of how many channels with the
linkedid exist. Not only does this eliminate the race condition, but it also
allows us to look up the linkedid by the hashed key instead of traversing the
entire channel list.
Review: https://reviewboard.asterisk.org/r/1895/
........
r365068 | twilson | 2012-05-02 12:02:39 -0500 (Wed, 02 May 2012) | 11 lines
Don't leak a ref if out of memory and can't link the linkedid
If the ao2_link fails, we are most likely out of memory and bad things
are going to happen. Before those bad things happen, make sure to clean
up the linkedid references.
This patch also adds a comment explaining why linkedid can't be passed
to both local channel allocations and combines two ao2_ref calls into 1.
Review: https://reviewboard.asterisk.org/r/1895/
........
Merged revisions 365006,365068 from http://svn.asterisk.org/svn/asterisk/branches/1.8
........
Merged revisions 365083 from http://svn.asterisk.org/svn/asterisk/branches/10
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@365084 65c4cc65-6c06-0410-ace0-fbb531ad65f3
The reason I'm removing this is that Coverity reported a STRAY_SEMICOLON
issue here. Since the function has been unused for so long, I just elected
to remove it altogether.
(closes issue ASTERISK-19660)
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@364915 65c4cc65-6c06-0410-ace0-fbb531ad65f3
Revision 360862 was intended to improve identities sent in dialog-info
NOTIFY requests. Some users reported that hint became broken once this
was done. It's not clear exactly what part of the patch has caused this
regression, but broken hints are bad.
For now, this revision is being reverted so that the next releases of
Asterisk do not have bad behavior in them. The original reported issue
will have to be fixed differently in the next version of Asterisk.
(issue ASTERISK-16735)
........
Merged revisions 364706 from http://svn.asterisk.org/svn/asterisk/branches/1.8
........
Merged revisions 364707 from http://svn.asterisk.org/svn/asterisk/branches/10
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@364708 65c4cc65-6c06-0410-ace0-fbb531ad65f3
If enabled using the keepalive option in sip.conf a small packet will be sent
at a regular interval to keep the NAT mapping open. This is lightweight as the
remote side does not need to parse and handle a SIP message.
(closes issue AST-783)
Review: https://reviewboard.asterisk.org/r/1756/
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@364500 65c4cc65-6c06-0410-ace0-fbb531ad65f3
Unref the SIP pvt stored in the refer structure as soon as it is no longer
needed so that the pvt and associated file descriptors can be freed sooner.
This change makes a reference decrement unnecessary in code that handles SIP
BYE/Also transfers which should not touch the reference anyway.
(Closes issue ASTERISK-19579)
Reported by: Maciej Krajewski
Tested by: Maciej Krajewski
........
Merged revisions 364258 from http://svn.asterisk.org/svn/asterisk/branches/1.8
........
Merged revisions 364259 from http://svn.asterisk.org/svn/asterisk/branches/10
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@364260 65c4cc65-6c06-0410-ace0-fbb531ad65f3
As a continuation of the patch in r356604, which allowed for the
reloading of SRTP keys in re-INVITE transfer scenarios, this patch
addresses the more common case where a new key is requested within
the context of a current SIP dialog. This can occur, for example, when
certain phones request a SIP hold.
Previously, once a dialog was associated with an SRTP object, any
subsequent attempt to process crypto keys in any SDP offer - either
the current one or a new offer in a new SIP request - were ignored. This
patch changes this behavior to only ignore subsequent crypto keys within
the current SDP offer, but allows future SDP offers to change the keys.
(issue ASTERISK-19253)
Reported by: Thomas Arimont
Tested by: Thomas Arimont
Review: https://reviewboard.asteriskorg/r/1885/
........
Merged revisions 364203 from http://svn.asterisk.org/svn/asterisk/branches/1.8
........
Merged revisions 364204 from http://svn.asterisk.org/svn/asterisk/branches/10
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@364205 65c4cc65-6c06-0410-ace0-fbb531ad65f3
The reference held for SIP blind transfers using the Replaces header in an
INVITE was never freed on success and also failed to be freed in some error
conditions. This caused a file descriptor leak since the RTP structures in use
at the time of the transfer were never freed. This reference leak and another
relating to subscriptions in the same code path have now been corrected.
(closes issue ASTERISK-19579)
........
Merged revisions 363986 from http://svn.asterisk.org/svn/asterisk/branches/1.8
........
Merged revisions 363987 from http://svn.asterisk.org/svn/asterisk/branches/10
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@363988 65c4cc65-6c06-0410-ace0-fbb531ad65f3
Some switches may not handle the call-deflection/call-rerouting message if
the call is disconnected too soon after being sent. Asteisk was not
waiting for any reply before disconnecting the call.
* Added a 5 second delay before disconnecting the call to wait for a
potential response if the peer does not disconnect first.
(closes issue ASTERISK-19708)
Reported by: mehdi Shirazi
Patches:
jira_asterisk_19708_v1.8.patch (license #5621) patch uploaded by rmudgett
Tested by: rmudgett
........
Merged revisions 363730 from http://svn.asterisk.org/svn/asterisk/branches/1.8
........
Merged revisions 363734 from http://svn.asterisk.org/svn/asterisk/branches/10
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@363740 65c4cc65-6c06-0410-ace0-fbb531ad65f3
Some ISDN switches occasionally fail to send a RESTART ACKNOWLEDGE in
response to a RESTART request.
* Made the second SETUP received after sending a RESTART request clear the
channel resetting state as if the peer had sent the expected RESTART
ACKNOWLEDGE before continuing to process the SETUP. The peer may not be
sending the expected RESTART ACKNOWLEDGE.
(issue ASTERISK-19608)
(issue AST-844)
(issue AST-815)
Patches:
jira_ast_815_v1.8.patch (license #5621) patch uploaded by rmudgett (modified)
........
Merged revisions 363687 from http://svn.asterisk.org/svn/asterisk/branches/1.8
........
Merged revisions 363688 from http://svn.asterisk.org/svn/asterisk/branches/10
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@363689 65c4cc65-6c06-0410-ace0-fbb531ad65f3
If Asterisk receives a SIP UPDATE request after a call has been terminated and
the channel has been destroyed but before the SIP dialog has been destroyed, a
condition exists where a connected line update would be attempted on a
non-existing channel. This would cause Asterisk to crash. The patch resolves
this by first ensuring that the SIP dialog has an owning channel before
attempting a connected line update. If an UPDATE request is received and no
channel is associated with the dialog, a 481 response is sent.
(closes issue ASTERISK-19770)
Reported by: Thomas Arimont
Tested by: Matt Jordan
Patches:
ASTERISK-19278-2012-04-16.diff uploaded by Matt Jordan (license 6283)
........
Merged revisions 363106 from http://svn.asterisk.org/svn/asterisk/branches/1.8
........
Merged revisions 363107 from http://svn.asterisk.org/svn/asterisk/branches/10
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@363108 65c4cc65-6c06-0410-ace0-fbb531ad65f3
When handling a keypad button message event, the received digit is placed into
a fixed length buffer that acts as a queue. When a new message event is
received, the length of that buffer is not checked before placing the new digit
on the end of the queue. The situation exists where sufficient keypad button
message events would occur that would cause the buffer to be overrun. This
patch explicitly checks that there is sufficient room in the buffer before
appending a new digit.
(closes issue ASTERISK-19592)
Reported by: Russell Bryant
........
Merged revisions 363100 from http://svn.asterisk.org/svn/asterisk/branches/1.6.2
........
Merged revisions 363102 from http://svn.asterisk.org/svn/asterisk/branches/1.8
........
Merged revisions 363103 from http://svn.asterisk.org/svn/asterisk/branches/10
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@363105 65c4cc65-6c06-0410-ace0-fbb531ad65f3
The CHANNEL_DEADLOCK_AVOIDANCE() feature of preserving where the channel
lock was originally obtained is overkill where ast_channel_lock_both() was
inlined.
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@362888 65c4cc65-6c06-0410-ace0-fbb531ad65f3
ISDN ETSI PTP and Q.SIG (And SS7 in future) have support for reporting who
was the original redirecting party of a call.
* Added support for the original redirecting party and reason to the
REDIRECTING function and the system core as well as to the stubbed
locations in sig_pri.c.
Review: https://reviewboard.asterisk.org/r/1829/
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@362779 65c4cc65-6c06-0410-ace0-fbb531ad65f3
* chan_mobile: Fixed an overrun where the cind_state buffer (an integer array
of size 16) would be overrun due to improper bounds checking. At worst, the
buffer can be overrun by a total of 48 bytes (assuming 4-byte integers),
which would still leave it within the allocated memory of struct hfp. This
would corrupt other elements in that struct but not necessarily cause any
further issues.
* app_sms: The array imsg is of size 250, while the array (ud) that the data
is copied into is of size 160. If the size of the inbound message is
greater then 160, up to 90 bytes could be overrun in ud. This would corrupt
the user data header (array udh) adjacent to ud.
* chan_unistim: A number of invalid memmoves are corrected. These would move
data (which may or may not be valid) into the ends of these buffers.
* asterisk: ast_console_toggle_loglevel does not check that the console log
level being set is less then or equal to the allowed log levels of 32.
* format_pref: In ast_codec_pref_prepend, if any occurrence of the specified
codec is not found, the value used to index into the array pref->order
would be one greater then the maximum size of the array.
* jitterbuf: If the element being placed into the jitter buffer lands in the
last available slot in the jitter history buffer, the insertion sort attempts
to move the last entry in the buffer into one slot past the maximum length
of the buffer. Note that this occurred for both the min and max jitter
history buffers.
* tdd: If a read from fsk_serial returns a character that is greater then 32,
an attempt to read past one of the statically defined arrays containing the
values that character maps to would occur.
* localtime: struct ast_time and tm are not the same size - ast_time is larger,
although it contains the elements of tm within it in the same layout. Hence,
when using memcpy to copy the contents of tm into ast_time, the size of tm
should be used, as opposed to the size of ast_time.
* extconf: this treats ast_timing's minmask array as if it had a length of 48,
when it has defined the size of the array as 24. pbx.h defines minmask as
having a size of 48.
(issue ASTERISK-19668)
Reported by: Matt Jordan
........
Merged revisions 362485 from http://svn.asterisk.org/svn/asterisk/branches/1.8
........
Merged revisions 362496 from http://svn.asterisk.org/svn/asterisk/branches/10
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@362497 65c4cc65-6c06-0410-ace0-fbb531ad65f3
Several telcos bring the BRI PTMP layer 1 down when the line is idle.
When layer 1 goes down, Asterisk cannot make outgoing calls. Incoming
calls could fail as well because the alarm processing is handled by a
different code path than the Q.931 messages.
* Add the layer1_presence configuration option to ignore layer 1 alarms
when the telco brings layer 1 down. This option can be configured by span
while the similar DAHDI driver teignorered=1 option is system wide. This
option unlike layer2_persistence does not require libpri v1.4.13 or newer.
Related to JIRA AST-598
JIRA ABE-2845
........
Merged revisions 362428 from http://svn.asterisk.org/svn/asterisk/branches/1.8
........
Merged revisions 362429 from http://svn.asterisk.org/svn/asterisk/branches/10
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@362430 65c4cc65-6c06-0410-ace0-fbb531ad65f3
When a bind address is set to an ANY address (udpbindport=::), a warning message
is displayed stating that "Address remapping activated in sip.conf but we're
using IPv6, which doesn't need it. Please remove 'localnet' and/or 'externaddr'
settings." But if one is running dual stack, we shouldn't be told to turn those
settings off.
This patch checks if the bind address is an ANY address or not. The warning
message will now only be displayed if the bind address is NOT an ANY address and
IPv6 is being used.
Also, updated the copyright year.
(closes issue ASTERISK-19456)
Reported by: Michael L. Young
Tested by: Michael L. Young
Patches:
chan_sip_ipv6_message.diff uploaded by Michael L. Young (license 5026)
........
Merged revisions 362253 from http://svn.asterisk.org/svn/asterisk/branches/1.8
........
Merged revisions 362264 from http://svn.asterisk.org/svn/asterisk/branches/10
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@362266 65c4cc65-6c06-0410-ace0-fbb531ad65f3
In chan_agent, while handling a channel indicate, the agent channel driver
must obtain a lock on both the agent channel, as well as the channel the
agent channel is using. To do so, it attempts to lock the other channel
first, then unlock the agent channel which is locked prior to entry into
the indicate handler. If this unlock fails with a negative return value,
which can occur if the object passed to agent_indicate is an invalid ao2
object or is NULL, the return value is passed directly to strerror, which
can only accept positive integer values.
In chan_dahdi, the return value of dahdi_get_index is used to directly
index into the sub-channel array. If dahd_get_index returns a negative
value, it would use that value to index into the array, which could cause
an invalid memory access. If dahdi_get_index returns a negative number,
we now default to SUB_REAL.
(issue ASTERISK-19655)
Reported by: Matt Jordan
Review: https://reviewboard.asterisk.org/r/1863/
........
Merged revisions 362204 from http://svn.asterisk.org/svn/asterisk/branches/1.8
........
Merged revisions 362205 from http://svn.asterisk.org/svn/asterisk/branches/10
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@362206 65c4cc65-6c06-0410-ace0-fbb531ad65f3
The current Security Events Framework API only supports IPv4 when it comes to
generating security events. This patch does the following:
* Changes the Security Events Framework API to support IPV6 and updates
the components that use this API.
* Eliminates an error message that was being generated since the current
implementation was treating an IPv6 socket address as if it was IPv4.
* Some copyright dates were updated on files touched by this patch.
(closes issue ASTERISK-19447)
Reported by: Michael L. Young
Tested by: Michael L. Young
Patches:
security_events_ipv6v3.diff uploaded by Michael L. Young (license 5026)
Review: https://reviewboard.asterisk.org/r/1777/
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@362200 65c4cc65-6c06-0410-ace0-fbb531ad65f3
In the MWI processing loop, when a valid event occurs the temporary caller ID
information is deallocated. If a new DAHDI channel is successfully created,
the event is passed up to the analog_ss_thread without error and the loop
exits. If, however, the DAHDI channel is not created, then the caller ID
struct has been free'd, and the gains reset to their previous level. This
will almost certainly cause an invalid access to the free'd memory, either
in subsequent calls to callerid_free or calls to callerid_feed.
* Rework the -r361705 patch to better manage the cs and mtd allocated
resources.
* Fixed use of mwimonitoractive flag to be correct if the mwi_thread()
fails to start.
........
Merged revisions 361854 from http://svn.asterisk.org/svn/asterisk/branches/1.8
........
Merged revisions 361855 from http://svn.asterisk.org/svn/asterisk/branches/10
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@361856 65c4cc65-6c06-0410-ace0-fbb531ad65f3
In the MWI processing loop, when a valid event occurs the temporary caller ID
information is deallocated. If a new DAHDI channel is successfully created,
the event is passed up to the analog_ss_thread without error and the loop
exits. If, however, the DAHDI channel is not created, then the caller ID
struct has been free'd, and the gains reset to their previous level. This
will almost certainly cause an invalid access to the free'd memory, either
in subsequent calls to callerid_free or calls to callerid_feed.
This patch makes it so that we only free the caller ID structure if a
DAHDI channel is successfully created, and we bump the gains back up
if we fail to make a DAHDI channel.
........
Merged revisions 361705 from http://svn.asterisk.org/svn/asterisk/branches/1.8
........
Merged revisions 361706 from http://svn.asterisk.org/svn/asterisk/branches/10
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@361707 65c4cc65-6c06-0410-ace0-fbb531ad65f3
This change makes use of connected party information in addition to caller ID in order
to populate local and remote XML elements in the dialog-info NOTIFYs.
(closes issue ASTERISK-16735)
Reported by: Maciej Krajewski
Tested by: Maciej Krajewski
Patches:
local_remote_hint2.diff uploaded by Mark Michelson (license 5049)
........
Merged revisions 360862 from http://svn.asterisk.org/svn/asterisk/branches/1.8
........
Merged revisions 360863 from http://svn.asterisk.org/svn/asterisk/branches/10
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@360872 65c4cc65-6c06-0410-ace0-fbb531ad65f3
This is just a minor code cleanup change. These uses of ao2_callback() would
never return anything since the callbacks always returned 0. However, be more
explicit that no returned results are wanted by specifying OBJ_NODATA.
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@360369 65c4cc65-6c06-0410-ace0-fbb531ad65f3
Q.951 indicates that when the presentation indicator is "Number not
available due to interworking" for a number then the screening indicator
field should be "Network provided".
* Made ast_party_id_presentation() return AST_PRES_NUMBER_NOT_AVAILABLE
when the presentation is "Number not available due to interworking". This
fix makes Asterisk consistent and it also makes it consistent with earlier
branches as far as this presentation value is concerned.
* Made pri_to_ast_presentation() and ast_to_pri_presentation() conversions
handle the "Number not available due to interworking" case better in
sig_pri.c. This change is possible because the minimum required libpri
version (v1.4.11) has the necessary defines in libpri.h.
........
Merged revisions 360309 from http://svn.asterisk.org/svn/asterisk/branches/1.8
........
Merged revisions 360310 from http://svn.asterisk.org/svn/asterisk/branches/10
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@360311 65c4cc65-6c06-0410-ace0-fbb531ad65f3
When Asterisk detects a hangup and cannot send a BYE due to a pending
INVITE, it sets the pendingbye flag and waits for the final response to that
INVITE. When the response is received, it transmits the BYE. If, however,
that INVITE request is a pending re-INVITE, it needs to first send a CANCEL
request to terminate the pending re-INVITE. In that circumstance, Asterisk
was, in some scenarios, clearing the pendingbye flag after processing the
CANCEL request and not checking for a pending BYE when receiving the final
487 response to the INVITE.
This patch ensures that if the pendingbye flag is set, it is honored
regardless of the nature of the INVITE request currently in flight.
(closes issue ASTERISK-19365)
Reported by: Thomas Arimont
Tested by: Thomas Arimont
Patches:
bugASTERISK-19365_2012_03_08.patch uploaded by mjordan (license 6283)
Review: https://reviewboard.asterisk.org/r/1807
........
Merged revisions 360086 from http://svn.asterisk.org/svn/asterisk/branches/1.8
........
Merged revisions 360088 from http://svn.asterisk.org/svn/asterisk/branches/10
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@360089 65c4cc65-6c06-0410-ace0-fbb531ad65f3
Added new chan_dahdi.conf colp_send option parameter to block connected
line updates per span.
(closes issue ASTERISK-17025)
Reported by: Michael Smith
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@358997 65c4cc65-6c06-0410-ace0-fbb531ad65f3
For analog lines, enables Asterisk to use dialtone detection per channel
if an incoming call was hung up before it was answered. If dialtone is
detected, the call is hung up.
no: Disabled. (Default)
yes: Look for dialtone for 10000 ms after answer.
<number>: Look for dialtone for the specified number of ms after answer.
always: Look for dialtone for the entire call. Dialtone may return
if the far end hangs up first.
dialtone_detect=yes
dialtone_detect=5000
dialtone_detect=always
(closes issue ASTERISK-19316)
Reported by: Jeremy Pepper
Patch by: Jeremy Pepper
Tested by: rmudgett,Jeremy Pepper
Review: https://reviewboard.asterisk.org/r/1737/
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@358344 65c4cc65-6c06-0410-ace0-fbb531ad65f3
Outgoing SS7 calls fail to detect incoming DTMF so any bridged channel
that requires out-of-band DTMF will not work.
* Added sig_ss7_open_media() calls at appropriate places in sig_ss7.c.
The new call converts conditionaled out unconverted code and shows that
the code really did something useful.
* Improved some chan_dahdi DTMF debug messages to help track DTMF
handling.
(closes issue ASTERISK-19312)
Reported by: Igor Nikolaev
........
Merged revisions 358260 from http://svn.asterisk.org/svn/asterisk/branches/1.8
........
Merged revisions 358261 from http://svn.asterisk.org/svn/asterisk/branches/10
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@358262 65c4cc65-6c06-0410-ace0-fbb531ad65f3
The check if an ISDN call is bridged before it could be placed on hold is
not necessary and is overly restrictive. The check was originally done to
prevent problems with call transfers in case a user tried to transfer a
call connected to an application to another call connected to an
application. The ISDN transfer code has not required this restriction for
quite some time because ECT could transfer any two active calls to each
other.
* Remove ISDN hold restriction for calls connected to applications.
* Made ast_waitfordigit_full() ignore AST_CONTROL_HOLD and
AST_CONTROL_UNHOLD instead of generating a warning message.
(closes issue ASTERISK-19388)
Reported by: Birger Harzenetter
Tested by: rmudgett
........
Merged revisions 357894 from http://svn.asterisk.org/svn/asterisk/branches/1.8
........
Merged revisions 357895 from http://svn.asterisk.org/svn/asterisk/branches/10
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@357896 65c4cc65-6c06-0410-ace0-fbb531ad65f3
Prior to this patch, Using "transport=" multiple times would cause them to add to one
another like allow/deny. This patch changes that behavior to simply use the transport
option specified last. Also, if no transport option is applied now, the default will
automatically be UDP.
(closes ASTERISK-19352)
Reported by: jamicque
Patches:
asterisk-19352-transport-warning-message-v1.patch uploaded by Michael L. Young (license 5026)
issueA19352_no_transport_is_udp.patch uploaded by Walter Doekes (license 5674)
Review: https://reviewboard.asterisk.org/r/1745/diff/#index_header
........
Merged revisions 357266 from http://svn.asterisk.org/svn/asterisk/branches/1.8
........
Merged revisions 357271 from http://svn.asterisk.org/svn/asterisk/branches/10
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@357288 65c4cc65-6c06-0410-ace0-fbb531ad65f3
chan_iax2 to pass in the correct types.
chan_iax2 is the only consumer for the various ast_netsock_* functions in trunk
at this point, so this feels like a safe change to make.
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@357005 65c4cc65-6c06-0410-ace0-fbb531ad65f3
send_diversion=no will prevent Diversion headers from being added to SIP
requests. This doesn't prevent Diversion from being added with dialplan
such as with SIPAddHeader.
(closes issue ASTERISK-16862)
Reported by: rsw686
Review: https://reviewboard.asterisk.org/r/1769/
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@356987 65c4cc65-6c06-0410-ace0-fbb531ad65f3
Currently, when using res_srtp, once the SRTP policy has been added to the
current session the policy is locked into place. Any attempt to replace an
existing policy, which would be needed if the remote endpoint negotiated a new
cryptographic key, is instead rejected in res_srtp. This happens in particular
in transfer scenarios, where the endpoint that Asterisk is communicating with
changes but uses the same RTP session.
This patch modifies res_srtp to allow remote and local policies to be reloaded
in the underlying SRTP library. From the perspective of users of the SRTP API,
the only change is that the adding of remote and local policies are now added
in a single method call, whereas they previously were added separately. This
was changed to account for the differences in handling remote and local
policies in libsrtp.
Review: https://reviewboard.asterisk.org/r/1741/
(closes issue ASTERISK-19253)
Reported by: Thomas Arimont
Tested by: Thomas Arimont
Patches:
srtp_renew_keys_2012_02_22.diff uploaded by Matt Jordan (license 6283)
(with some small modifications for this check-in)
........
Merged revisions 356604 from http://svn.asterisk.org/svn/asterisk/branches/1.8
........
Merged revisions 356605 from http://svn.asterisk.org/svn/asterisk/branches/10
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@356606 65c4cc65-6c06-0410-ace0-fbb531ad65f3
Custom parking extensions may not be coded such that the first and only
extension priority is the Park application. These custom parking
extensions will not be recognized as parking extensions. When a call is
blind transferred to an extension that is not recognized as a parking
extension, the normal blind transfer code causes the transferred channel
to start executing dialplan. Calls that get parked in this manner do not
know the original channel name that parked the call so the original parker
could never be called back if the parked call is not retrieved before the
timeout time. The parking space is also announced to the call being
parked as a side effect of not knowing the original parking channel.
* Fix handling of BLINDTRANSFER channel variable for call parking.
* Fixed SIP blind transfer using the wrong dialplan context variable to
check for the parking extension.
(closes issue ASTERISK-19322)
Reported by: aragon
Tested by: rmudgett, jparker
Review: https://reviewboard.asterisk.org/r/1730/
JIRA AST-766
........
Merged revisions 356521 from http://svn.asterisk.org/svn/asterisk/branches/1.8
........
Merged revisions 356522 from http://svn.asterisk.org/svn/asterisk/branches/10
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@356523 65c4cc65-6c06-0410-ace0-fbb531ad65f3
When we send an ACK for a 2xx response to an INVITE, we are supposed
to use the learned route set. However, when we receive a non-2xx final
response to an INVITE, we are supposed to send the ACK to the same place
we initially sent the INVITE.
We had been doing this up until the changes went in that would build a route
set from provisional responses. That introduced a regression where we would
use the learned route set under all circumstances.
With this change, we now will set the destination of our ACK based on the
invitestate. If it is INV_COMPLETED then that means that we have received
a non-2xx final response (INV_TERMINATED indicates a 2xx response was received).
If it is INV_CANCELLED, then that means the call is being canceled, which
means that we should be ACKing a 487 response.
The other change introduced here is setting the invitestate to INV_CONFIRMED
when we send an ACK *after* the reqprep instead of before. This way, we can
tell in reqprep more easily what the invitestate is prior to sending the ACK.
(closes issue ASTERISK-19389)
reported by Karsten Wemheuer
patches:
ASTERISK-19389v2.patch uploaded by Mark Michelson (license #5049)
(with some slight modifications prior to commit)
........
Merged revisions 356475 from http://svn.asterisk.org/svn/asterisk/branches/1.8
........
Merged revisions 356476 from http://svn.asterisk.org/svn/asterisk/branches/10
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@356477 65c4cc65-6c06-0410-ace0-fbb531ad65f3
https://origsvn.digium.com/svn/asterisk/branches/10
................
r356215 | mjordan | 2012-02-22 08:53:53 -0600 (Wed, 22 Feb 2012) | 32 lines
Merged revisions 356214 via svnmerge from
https://origsvn.digium.com/svn/asterisk/branches/1.8
........
r356214 | mjordan | 2012-02-22 08:50:20 -0600 (Wed, 22 Feb 2012) | 27 lines
Fix potential buffer overrun and memory leak when executing "sip show peers"
The "sip show peers" command uses a fix sized array to sort the current peers
in the peers ao2_container. The size of the array is based on the current
number of peers in the container. However, once the size of the array is
determined, the number of peers in the container can change, as the peers
container is not locked. This could cause a buffer overrun when populating
the array, if peers were added to the container after the array was created.
Additionally, a memory leak of the allocated array would occur if a user
caused the _show_peers method to return CLI_SHOWUSAGE.
We now create a snapshot of the current peers using an ao2_callback with the
OBJ_MULTIPLE flag. This size of the array is set to the number of peers
that the iterator will iterate over; hence, if peers are added or removed
from the peers container it will not affect the execution of the "sip show
peers" command.
Review: https://reviewboard.asterisk.org/r/1738/
(closes issue ASTERISK-19231)
(closes issue ASTERISK-19361)
Reported by: Thomas Arimont, Jamuel Starkey
Tested by: Thomas Arimont, Jamuel Starkey
Patches: sip_show_peers_2012_02_16.diff uploaded by mjordan (license 6283)
........
................
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@356216 65c4cc65-6c06-0410-ace0-fbb531ad65f3
IAX2 uses the trunkfreq variable to determine how often to send trunk packets, but
this value is in milliseconds while ast_timer_set_rate() expects the rate argument
to be ticks per second. So we divide 1000 by trunkfreq and pass that in instead.
With a default of 20ms, this change makes IAX2 send trunk packets every 20ms
instead of every 50ms.
Tracked down by myself and Bob Wienholt.
........
Merged revisions 355746 from http://svn.asterisk.org/svn/asterisk/branches/1.8
........
Merged revisions 355747 from http://svn.asterisk.org/svn/asterisk/branches/10
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@355748 65c4cc65-6c06-0410-ace0-fbb531ad65f3
This fixes two main issues:
1. Asterisk would send a CANCEL to the route created by the provisional response
instead of using the same destination it did in the initial INVITE.
2. If a new route set arrives in a 200 OK than was in the 1XX response (perfectly
possible if our outbound INVITE gets forked), then the route set in the 200 OK
needs to overwrite the route set in the 1XX response.
(closes issue ASTERISK-19358)
Reported by: Karsten Wemheuer
Tested by: Karsten Wemheuer
patches:
ASTERISK-19358.patch uploaded by Mark Michelson (license 5049)
ASTERISK-19358.patch uploaded by Stefan Schmidt (license 6034)
Review: https://reviewboard.asterisk.org/r/1749
........
Merged revisions 355732 from http://svn.asterisk.org/svn/asterisk/branches/1.8
........
Merged revisions 355733 from http://svn.asterisk.org/svn/asterisk/branches/10
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@355745 65c4cc65-6c06-0410-ace0-fbb531ad65f3
This patch adds the auto_force_rport and auto_comedia NAT options. It
also converts the nat= setting to a list of comma-separated combinable
options: no, force_rport, comedia, auto_force_rport, and auto_comedia.
nat=yes remains as an undocumented option equal to
"force_rport,comedia". The first instance of 'yes' or 'no' in the list
stops parsing and overrides any previously set options. If an auto_*
option is specified with its non-auto_ counterpart, the auto setting
takes precedence.
This patch builds upon the patch posted to ASTERISK-17860 by JIRA user
pedro-garcia.
(closes issue ASTERISK-17860)
Review: https://reviewboard.asterisk.org/r/1698/
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@354597 65c4cc65-6c06-0410-ace0-fbb531ad65f3
In ASTERISK-18924, SIP INFO DTMF handlingw as changed to account for both
lowercase alphatbetic DTMF events, as well as uppercase alphabetic DTMF
events. When this occurred, the comparison of the character buffer containing
the event code was changed such that the buffer was first compared again '0'
and '9' to determine if it was numeric. Unfortunately, since the first
character in the buffer will typically be '1' in the case of non-numeric
event codes (10-16), this caused those codes to be converted to a DTMF event
of '1'. This patch fixes that, and cleans up handling of both
application/dtmf-relay and application/dtmf content types.
Review: https://reviewboard.asterisk.org/r/1722/
(closes issue ASTERISK-19290)
Reported by: Ira Emus
Tested by: mjordan
........
Merged revisions 354542 from http://svn.asterisk.org/svn/asterisk/branches/1.8
........
Merged revisions 354543 from http://svn.asterisk.org/svn/asterisk/branches/10
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@354544 65c4cc65-6c06-0410-ace0-fbb531ad65f3
This patch is based on the one by David Vossel, developer extrodinaire, at
https://reviewboard.asterisk.org/r/344/. If multiple peers are defined with the
same host/port, but differing callbackextensions, it chooses the peer with the
matching callbackextension. Since callbackextension creates an outbound
registration with the callbackextension as the Contact address, matching an
incoming request by that (in addition to the host/port) makes a lot of sense.
This patch also adds support for callbackextension to realtime by querying all
peers with callbackextensions on reload and adding registrations for them.
(closes issue ASTERISK-13456)
Review: https://reviewboard.asterisk.org/r/344/
Review: https://reviewboard.asterisk.org/r/1717/
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@354458 65c4cc65-6c06-0410-ace0-fbb531ad65f3
This changes the debuglevel of 'pri set debug' to a bit mask allowing the user
to independently select bits of output:
1 libpri internals including state machine
2 Decoded Q.931 messages
4 Decoded Q.921 headers
8 raw hex dump of the full frames
Additionally, this ensures that the meaning of "on" does not change and
intrudces intense and hex to simplify usage.
(closes issue ASTERISK-17159)
Original-patch-by: wimpy
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@354165 65c4cc65-6c06-0410-ace0-fbb531ad65f3
After R340970 Asterisk was still polling the RTCP file descriptor after RTCP is
shut down and removed. If the descriptor happened to have data ready when the
removal occured then Asterisk would go into an infinite loop trying to read
data that it can never actually access. This change disables the audio RTCP
file descriptor for the duration of the T.38 transaction.
(closes issue ASTERISK-18951)
Reported-by: Kristijan Vrban
........
Merged revisions 353915 from http://svn.asterisk.org/svn/asterisk/branches/1.8
........
Merged revisions 353916 from http://svn.asterisk.org/svn/asterisk/branches/10
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@353917 65c4cc65-6c06-0410-ace0-fbb531ad65f3
This feature also causes the sending complete ie to be sent for switch
types that do not automatically send the ie. (EuroISDN/ETSI)
The main difference between dialing Dial(DAHDI/g0/1234w888) and
Dial(DAHDI/g0/1234,,D(888)) is the sending of the sending complete ie.
(closes issue ASTERISK-19176)
Reported by: rmudgett
Tested by: rmudgett
........
Merged revisions 353867 from http://svn.asterisk.org/svn/asterisk/branches/1.8
........
Merged revisions 353868 from http://svn.asterisk.org/svn/asterisk/branches/10
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@353872 65c4cc65-6c06-0410-ace0-fbb531ad65f3
A previous patch I committed from ASTERISK-16930 unexpectedly changed some output for
the AMI action "sippeers" which this patch changes back. Also, this aligns the output
for the cli command "sip show peers" and fixes another issue that patch introduced by
using ast_sockaddr_stringify calls multiple times without immediately using the pointer.
I also went ahead and did a little janitorial work to clean up whitespace in
_sip_show_peers.
(issue ASTERISK-16930)
(closes issue ASTERISK-19281)
Reported by: Patrick El Youssef
Patches:
ASTERISK-19281.diff uploaded by Walter Doekes (license 5674)
........
Merged revisions 353769 from http://svn.asterisk.org/svn/asterisk/branches/1.8
........
Merged revisions 353771 from http://svn.asterisk.org/svn/asterisk/branches/10
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@353772 65c4cc65-6c06-0410-ace0-fbb531ad65f3
There are a number of cleaner looking wrappers for ast_sockaddr_stringify_fmt
available which are slightly more readable than using a direct call to
ast_sockaddr_stringify_fmt. This patch switches a number of those calls in
chan_sip to use those wrappers and is generally harmless.
(Closes issue ASTERISK-16930)
Reported by: Michael L. Young
Patches:
chan_sip-broken-registration-1.8.diff uploaded by Michael L. Young (license 5026)
........
Merged revisions 353720 from http://svn.asterisk.org/svn/asterisk/branches/1.8
........
Merged revisions 353721 from http://svn.asterisk.org/svn/asterisk/branches/10
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@353725 65c4cc65-6c06-0410-ace0-fbb531ad65f3
Asterisk's dnsmgr currently takes a pointer to an ast_sockaddr and updates it
anytime an address resolves to something different. There are a couple of
issues with this. First, the ast_sockaddr is usually the address of an
ast_sockaddr inside a refcounted struct and we never bump the refcount of those
structs when using dnsmgr. This makes it possible that a refresh could happen
after the destructor for that object is called (despite ast_dnsmgr_release
being called in that destructor). Second, the module using dnsmgr cannot be
aware of an address changing without polling for it in the code. If an action
needs to be taken on address update (like re-linking a SIP peer in the
peers_by_ip table), then polling for this change negates many of the benefits
of having dnsmgr in the first place.
This patch adds a function to the dnsmgr API that calls an update callback
instead of blindly updating the address itself. It also moves calls to
ast_dnsmgr_release outside of the destructor functions and into cleanup
functions that are called when we no longer need the objects and increments the
refcount of the objects using dnsmgr since those objects are stored on the
ast_dnsmgr_entry struct. A helper function for returning the proper default SIP
port (non-tls vs tls) is also added and used.
This patch also incorporates changes from a patch posted by Timo Teräs to
ASTERISK-19106 for related dnsmgr issues.
(closes issue ASTERISK-19106)
Review: https://reviewboard.asterisk.org/r/1691/
........
Merged revisions 353371 from http://svn.asterisk.org/svn/asterisk/branches/1.8
........
Merged revisions 353397 from http://svn.asterisk.org/svn/asterisk/branches/10
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@353418 65c4cc65-6c06-0410-ace0-fbb531ad65f3
Richard Mudgett
Mark Michelson
Damien Wedhorn
Joshua Colp
Matthew Jordan
Kinsey Moore
Jonathan Rose
Tzafrir Cohen
Igor Goncharovskiy
Kevin P. Fleming
Walter Doekes
Terry Wilson
Michael L. Young
Jason Parker
Alec L Davis
Russell Bryant
Sean Bright
Paul Belanger