30321 Commits (5295c4685aae48bd060ddb8a7fdfffe0dcacfbb9)

 

All Branches   

Search

Author	SHA1	Message	Date
Corey Farrell	5295c4685a	loader: Rework of load_dynamic_module. ... * Split off load_dlopen to perform actual dlopen, check results and log warnings when needed. * Use flags which minimize number of calls to dlopen required. First attempt always uses RTLD_GLOBAL when global_symbols_only is enabled, RTLD_LOCAL when it is not. This patch significantly reduces the number of dlopen's performed. With 299 modules my system ran dlopen 857 times before this patch, 655 times after this patch. Change-Id: Ib2c9903cfddcc01aed3e01c1e7fe4a3fb9af0f8b	8 years ago
Corey Farrell	69b82113fa	loader: Minor fix to module registration. ... This protects the module loader itself against crashing if dlopen is called on a module from outside loader.c. * Expand scope of lock inside ast_module_register to include reading of resource_being_loaded. * NULL check resource_being_loaded. * Set resource_being_loaded NULL as soon as dlopen returns. This fixes some error paths where it was not NULL'ed. * Create module_destroy function to deduplicate code from ast_module_unregister and modules_shutdown. * Resolve leak that occured if a module did not successfully register. * Simplify checking for successful registration. Change-Id: I40f07a315e55b92df4fc7faf525ed6d4f396e7d2	8 years ago
Jenkins2	76deae295f	Merge "pjsip: Ignore state changes from old transactions." into 15	8 years ago
Jenkins2	cff0f36686	Merge "res_pjsip_session: Reinvite using active stream topology if none requested." into 15	8 years ago
Jenkins2	c3e1f4f66b	Merge "configs: Comment out and change IP of iax.conf [demo]" into 15	8 years ago
George Joseph	9d63832e28	res_pjsip_sdp_rtp: Add NULL check in add_crypto_to_stream ... add_crypto_to_stream wasn't checking for a NULL session->inv_session->neg before calling pjmedia_sdp_neg_get_state. This was causing a crash if the negotiation hadn't already been completed and asterisk was compiled with --enable-dev-mode. Change-Id: I57c6229954a38145da9810fc18657bfcc4d9d0c9	8 years ago
Sean Bright	a150e88e72	configs: Comment out and change IP of iax.conf [demo] ... This no longer appears to exist, so no sense in causing confusion. ASTERISK-27175 #close Reported by: Tzafrir Cohen Change-Id: Idde967924c69f6a741dc9a5ab7dacb44d22cf100	8 years ago
Joshua Colp	e2f928df53	Merge "menuselect: Tweak check for recently run configure." into 15	8 years ago
Joshua Colp	25f2614584	Merge "README: Remove outdated references to tex docs" into 15	8 years ago
Joshua Colp	42d797e703	Merge "res_pjsip: Assign support levels to a few modules" into 15	8 years ago
Jenkins2	144d523001	Merge "pjsip_options: contacts sometimes not being updated on reload" into 15	8 years ago
George Joseph	1f9317b9df	README: Remove outdated references to tex docs ... Added links to the wiki to replace references to outdated tex docs. ASTERISK-27430 Reported by: Corey Farrell Change-Id: I5007e732b30bc7b63d124c530ae8857c89991209	8 years ago
Jenkins2	898889d3f1	Merge "pjsip_options: dynamic contact's fields not updated on reload" into 15	8 years ago
Jenkins2	c1972ebbab	Merge "CLI: Fix 'core show sysinfo' function ordering." into 15	8 years ago
Jenkins2	8986fcfa7a	Merge "chan_pjsip/res_pjsip: Add CHANNEL(pjsip,request_uri)" into 15	8 years ago
George Joseph	749bfd9fed	Merge "AST-2017-012: Place single RTCP report block at beginning of report." into 15	8 years ago
Joshua Colp	6b3bbba6dd	AST-2017-012: Place single RTCP report block at beginning of report. ... When the RTCP code was transitioned over to Stasis a code change was made to keep track of how many reports are present. This count controlled where report blocks were placed in the RTCP report. If a compound RTCP packet was received this logic would incorrectly place a report block in the wrong location resulting in a write to an invalid location. This change removes this counting logic and always places the report block at the first position. If in the future multiple reports are supported the logic can be extended but for now keeping a count serves no purpose. ASTERISK-27382 ASTERISK-27429 Change-Id: Iad6c8a9985c4b608ef493e19c421211615485116	8 years ago
Joshua Colp	0c3b972ef2	Merge "chan_sip: Don't crash in Dial on invalid destination" into 15	8 years ago
Joshua Colp	272594a70a	res_pjsip_session: Reinvite using active stream topology if none requested. ... When a connected line update is sent to an endpoint we do not request a specific stream topology to be used. Previously this resulted in the configured stream topology being used which may actually differ from the currently negotiated topology. PJSIP is helpful in this regard in that it will fill in any missing streams with removed ones. This results in our own state not matching the SDP, though, and we do not apply the negotiated SDP. This change tweaks the code to use the actively negotiated stream topology if it is present with a fallback to the configured one. This results in the SDP and the state having matching information and the world is happy. ASTERISK*27397 Change-Id: I7a57117f0183479e6884b7bf3a53bb8c7464f604	8 years ago
Jenkins2	f23796ef29	Merge "chan_sip: Don't send trailing \0 on keep alive packets" into 15	8 years ago
Joshua Colp	a6f4edf032	pjsip: Ignore state changes from old transactions. ... When we fail over to a new target we create a new transaction and it becomes the current INVITE transaction. This does not prevent the previous transaction from raising state changes and causing the session to be prematurely disconnected if a transport error occurs immediately. This change backports a fix from PJSIP that eliminates the incorrect state change and reduces when they would be raised in the first place. ASTERISK-27408 Change-Id: Id22d087591782eee31311753d11e7eca4b95ef34	8 years ago
Sean Bright	b82e216f5d	chan_sip: Don't send trailing \0 on keep alive packets ... This is a partial fix for ASTERISK~25817 but does not address the comments regarding RFC 5626. Change-Id: I227e2d10c0035bbfa1c6e46ae2318fd1122d8420	8 years ago
Sean Bright	d22bccef95	chan_sip: Don't crash in Dial on invalid destination ... Stripping the DNID in a SIP dial string can result in attempting to call the argument parsing macros on an empty string, causing a crash. ASTERISK-26131 #close Reported by: Dwayne Hubbard Patches: dw-asterisk-master-dnid-crash.patch (license #6257) patch uploaded by Dwayne Hubbard Change-Id: Ib84c1f740a9ec0539d582b09d847fc85ddca1c5e	8 years ago
Corey Farrell	cc1e215812	menuselect: Tweak check for recently run configure. ... Recently menuselect has randomly produced an error stating that configure was just run and make had to be restarted. I believe this is due to an incorrect menuselect/Makefile rule. The original rule produced an error if makeopts or autoconfig.h were older than makeopts.in or autoconfig.h.in. I believe this can create an issue if makeopts is older than autoconfig.h.in or if autoconfig.h is older than makeopts.in. The new rules compare files independently. Change-Id: Ibca155035fa1392c95e33cbf25f257902abba17b	8 years ago
Richard Mudgett	c0822c32ac	chan_pjsip/res_pjsip: Add CHANNEL(pjsip,request_uri) ... This patch does three things associated with the initial incoming INVITE request URI. 1) Add access to the full initial incoming INVITE request URI. 2) We were not setting DNID on incoming PJSIP channels. The DNID is the user portion of the initial incoming INVITE Request-URI. The value is accessed by reading CALLERID(dnid). 3) Fix CHANNEL(pjsip,target_uri) documentation. * The initial incoming INVITE request URI is now available using CHANNEL(pjsip,request_uri). * Set the DNID on PJSIP channel creation so CALLERID(dnid) can return the initial incoming INVITE request URI user portion. * CHANNEL(pjsip,target_uri) now correctly documents that the target URI is the contact URI. * Refactored print_escaped_uri() out of channel_read_pjsip() to handle pjsip_uri_print() error condition when the buffer is too small. ASTERISK-27478 Change-Id: I512e60d1f162395c946451becb37af3333337b33	8 years ago
Sean Bright	02bd461c9e	res_pjsip: Add TLSv1.1 and TLSv1.2 support ... Support for these protocols was added in the same commit as the 'proto' field, so we can safely use the same ./configure check. For reference: https://trac.pjsip.org/repos/changeset/4968 Change-Id: Icf4975d785d6bfb8f30ac7ffa695a0adf9382dac	8 years ago
Sean Bright	bb4fdd3890	res_pjsip: Assign support levels to a few modules ... Change-Id: I51f6945c4023cb93fc7b87be5ab4c50e9e6ee27d	8 years ago
Corey Farrell	c6e137ee16	CLI: Fix 'core show sysinfo' function ordering. ... Handle CLI initialization before any processing occurs. Change-Id: I598b911d2e409214bbdfd0ba0882be1d602d221c	8 years ago
Richard Mudgett	0384e49a6e	stasis_channels.c: Don't set channel snapshot caller_dnid twice. ... Change-Id: Ib8d45bbdfbda81e65045f6dff874d189b74e5471	8 years ago
George Joseph	9ed7cdf949	Merge "codec_opus: Make libcurl a dependency in menuselect" into 15	8 years ago
Jenkins2	5fb14aab28	Merge "astdb: Improve prefix searches in astdb" into 15	8 years ago
Jenkins2	910c6c260b	Merge "loader: Refactor resource_name_match." into 15	8 years ago
Jenkins2	c421d786d4	Merge "res_stasis and res_speech: Fix load order." into 15	8 years ago
Jenkins2	75af0af465	Merge "utils: Add convenience function for setting fd flags" into 15	8 years ago
Sean Bright	c8480b68cd	codec_opus: Make libcurl a dependency in menuselect ... ASTERISK-27475 #close Change-Id: If7384bc6ed002ef140dec69798d14c52b7cfd800	8 years ago
Jenkins2	dacbb0f442	Merge "pjsip: Improve CLI completion performance" into 15	8 years ago
Jenkins2	94dd1ec7b8	Merge "CDR: Fix deadlock setting some CDR values." into 15	8 years ago
Sean Bright	a419bf0b1e	pjsip: Improve CLI completion performance ... Use the new ast_cli_completion_add() function to improve completion performance for commands like 'pjsip show endpoint.' Change-Id: I76d802294d2ac1766110dc75f7d117c8541ce348	8 years ago
Sean Bright	d9843c84ef	astdb: Improve prefix searches in astdb ... Using the LIKE operator requires a full table scan of 'astdb', whereas a comparison operation is able to use the primary key index. This patch adds a new function to the AstDB API for quick prefix matches and updates res_sorcery_astdb to utilize it. This showed substantial performance improvement in my test environment. Related to ASTERISK~26806, but does not completely resolve it. Change-Id: I7d37f9ba2aea139dabf2ca72d31fbe34bd9b2fa1	8 years ago
Corey Farrell	bc20130683	loader: Refactor resource_name_match. ... Optimize resource_name_match. This change eliminates use of ast_strdupa, instead verifying that both basename's are the same length, then using strncasecmp. Change-Id: I477275c0e954c99d74be5abfc8bb6545b04e5a3d	8 years ago
Sean Bright	9b705dee74	pjsip_configuration: Add correct file header ... Change-Id: I25348c386a222bb704aff07f54375108a6402906	8 years ago
Sean Bright	f9c6f69205	utils: Add convenience function for setting fd flags ... There are many places in the code base where we ignore the return value of fcntl() when getting/setting file descriptior flags. This patch introduces a convenience function that allows setting or clearing file descriptor flags and will also log an error on failure for later analysis. Change-Id: I8b81901e1b1bd537ca632567cdb408931c6eded7	8 years ago
Corey Farrell	95a90bdca1	res_stasis and res_speech: Fix load order. ... res_stasis was missing AST_MODFLAG_LOAD_ORDER. Set res_stasis and res_speech to start at (AST_MODPRI_APP_DEPEND - 1) so they are ready for dependent modules. Change-Id: I27f4f3810a95b6be8a5bfbf62be2ace6bfab6ff3	8 years ago
Kevin Harwell	6d8d754258	pjsip_options: contacts sometimes not being updated on reload ... For both dynamic and static contacts it was possible that potential AOR changes were not being applied to all contacts. This was because the qualify and schedule code was only retrieving AOR's, and contacts with frequencies greater than zero. For instance the following could happen: and AOR/contact has a frequency of 5, it then gets set to 0, and then a reload occurs. All scheduled OPTIONS are stopped, a list of AOR's is retrieved with frequency > 0, but none are selected since in this scenario all are 0. The contact for the one previously set to 5 though does not get updated, so it's status remains "AVAILABLE". This patch makes it so all contacts (static and dynamic) are selected, and appropriately updated if need be. ASTERISK-27467 #close Change-Id: I7a920170f89c683af9505d4723a44fc6841decdb	8 years ago
Kevin Harwell	845a0d8de3	pjsip_options: dynamic contact's fields not updated on reload ... Dynamic contacts were not being properly updated on reload. As a matter of fact any changes to the AOR that a dynamic contact was associated with were not being applied. On reload, this patch makes it so for each dynamic contact, the associated AOR is now retrieved and the AOR's fields are applied to the contact. ASTERISK-27467 Change-Id: I8e3165dc6a745218c1c9db837f77fafa0516985d	8 years ago
Jenkins2	52de5a05f0	Merge "translate: Skip matrix_rebuild during shutdown." into 15	8 years ago
Joshua Colp	fead60166e	Merge "CLI: Fix remote console completion." into 15	8 years ago
Jenkins2	a51c82eb02	Merge "sounds_index: Avoid repeatedly reindexing." into 15	8 years ago
Jenkins2	c37093f2ff	Merge "media_index: Improve startup." into 15	8 years ago
Corey Farrell	b8a063f4bf	CLI: Fix remote console completion. ... Duplicate checking was done incorrectly when parsing completion options from a remote console causing all options to be ignored as duplicates. Once fixed I had to separate processing of the best match to ensure it was not identified as a duplicate when it is the only match. ASTERISK-27465 Change-Id: Ibbdb29f88211742071836c9b3f4d2aa1221cd0f9	8 years ago